The information in this pattern is presented in good faith. Every effort has been taken to assure the accuracy herein.

©2020 Shannon Fabrics, Inc., 3131 South Alameda Street, Los Angeles, CA 90058 info@shannonfabrics.com www.shannonfabrics.com 866.624.5252

Fabric Requirements 1/4 yd. of each Cuddle® 3 color: Opal, Seafoam, Azure, Peacock, Electric Blue, Royal Blue, Amethyst and Jewel 1 yd. Luxe Cuddle® Marble Black (includes binding)1/4 yd. Cuddle® 3 Snow 1 1/2 yds. Cuddle® for backing

Suggested Notions: Coordinating threadStretch 90/14 machine needleWalking footRotary cutter and matScissors Long, flat flower-head pins Fabric clips Basting spray, optionalThin, poly batting (44” x 55”)

DaydreamQuiltApproximate Finished Size: 42” x 53”

DaydreamQuilt

For more tips on working with Embrace® Double Gauze and Cuddle® fabrics, visit www.shannonfabrics.com

Assembly Instructions: 1. Lay batting on flat surface. Center the backing fabric onto the batting, then fold to spray the wrong side of fabric with adhesive.

2. Smooth the backing fabric over the batting.,

3. Peel back the backing on the unglued side. Spray with adhesive and smooth the backing fabric back into place, easing out wrinkles as you go.

4. Turn batting side up. Find center of quilt and mark both horizon-tal and vertical lines with a felt tip pen.

5. Lay Peacock strip on batting, lining upper raw edge along hori-zontal line, starting 15” from vertical line. 6. Lay the Electric Blue strip, right sides together with the Peacock, matching top raw edge and pin well.

7. Using a 1/2” seam allowance, stitch through both strips, batting and backing.

8. Spray adhesive on back of strip (covering fabric with paper to avoid overspray) and flip into place, smoothing out wrinkles as you go.

Daydream QuiltApproximate Finished Size: 42” x 53”

Cutting Instructions: Cut one 5” x 30” strip of each Cuddle® 3: Opal, Seafoam, Azure, Peacock, Electric Blue, Royal Blue, Amethyst, and Jewel Cut two 2 1/2” x 30” strips of Cuddle® 3 Snow Cut two 2 1/2” x 44” strips of Cuddle® 3 Snow Cut four 1 3/4” x WOF strips of Luxe Cuddle® Marble Black Cut two 6” x 54” strips of Luxe Cuddle® Marble Black Cut two 6” x 33” strips of Luxe Cuddle® Marble Black Cut 44” x 55” backing of coordinating Cuddle®

Watch our video tutorials at youtube.com/ShannonFabricsfor more tips on working with Cuddle® fabrics,

visit www.shannonfabrics.com.

9. Continue working from the center outward (in both directions) in this manner, adding the strips as shown below. Trim length of strips if necessary.

10. Add white inner border, starting with top and bottom, then sides.

11. Add black outer border, starting with top and bottom, then sides.

10. Trim to 42” x 53” using a rotary cutter.

11. Bind according to Binding with Cuddle® tip sheet.

Jewel

Amethyst

Royal Blue

Electric Blue

Peacock

Azure

Seafoam

Opal

Black

Black

Black Blac

k

White

White

Whi

te

White