Dawn Pricelist September · PDF file2017 Dawn Equipment Co. Inc. 370 N. Cross, PO Box 497...

CONTENTS

TRASHWHEEL® STEM ASSEMBLIES ........................................................ 2

TRASHWHEEL® MOUNTS ..................................................................... 3

COULTERS ...................................................................................... 4

COULTER / TRASHWHEEL® COMBINATIONS FULL WIDTH OPTIONS ................... 5

COULTER / TRASHWHEEL® COMBINATIONS NARROW ROW OPTIONS ................ 6

TRASHWHEEL® FLOATING ROW CLEANERS ............................................... 7

M-SERIES CLOSING WHEEL .................................................................. 8

HYDRAULIC PLANTER ATTACHMENTS ..................................................... 9

GFX - GROUND EFFECTS ........................................................... 9

REFLEX - ACTIVE PLANTER SUSPENSION .....................................10

CFX - COULTER EFFECTS .........................................................11

PNEUMATIC PLANTER ATTACHMENTS.....................................................12

GFX-P PNEUMATIC............................................................... 12

PLURIBUS STRIP-TILL........................................................................13

DAWN BIOLOGIC LINE....................................................................14-15

ZRX - ZONE ROLLER..............................................................14

DUOSEED - ULTRA-NARROW SEEDER/INTER-SEEDER..................... 15

KITS & PARTS - TRASHWHEELS®, COULTERS & COMBINATIONS ................16-17

KITS & PARTS - CLOSING WHEELS ........................................................18

KITS & PARTS - HYDRAULIC TOOLS ...................................................18-20

KITS & PARTS - FERTILIZER APPLICATORS & STRIP TILL .............................21

KITS & PARTS - MISCELLANEOUS .....................................................22-23

TOOLBARS & STRIP-TILL SYSTEMS........................................................24

i

© 2017 Dawn Equipment Co. Inc. 370 N. Cross, PO Box 497 Sycamore, Illinois 60178.Prices and specifications subject to change without notice. All prices are FOB Dawn Factory, Sycamore Illinois 60178.

dawnequipment.com | 800.554.0007Dawn Equipment Company Price List 2

TRASHWHEEL® ROW CLEANERS & STEM ASSEMBLIES

Model # Description List Price(stem only)

List Price(with mount)

1130A-1414” DUAL TRASHWHEELS® ROW CLEANER: The original Dawn row cleaner with patented 14” hot drop-forged wheels, Timken® tapered roller bearings, and regreasable o-ring sealed Supercaps. These wheels may be set offset right or left, intersecting, or both back to straddle a coulter (exe. 1572 combo).

$320.00 $425.00

1130A-12.7512.75” DUAL TRASHWHEELS® ROW CLEANER: 12.75” hot drop-forged Trashwheels®. These wheels may be set offset right or left, or both back to straddle a coulter (exe. Dawn patented 1572 combo). Clears residue with minimal soil disturbance. Comes up higher than the 14” wheel. Recommended on JD NT series & 1790.

$320.00 $425.00

1136A-1414” SINGLE TRASHWHEELS® ROW CLEANER: This 14” single wheel assembly includes and extension kit that sets the wheel forward, to clear residue from the seed centerline. May be set to move trash right or left. Useful on narrow rows, but does not clear residue the full width of the planter gauge wheels.

$235.00 $340.00

1136A-SWDAWN SCISSORWHEEL ROW CLEANER: This row cleaner is only available in a dual row cleaner assembly. The wheel may be set offset right or left, but is designed to run as a shear in the intersecting position. The Scissor wheel uses the M-Series hub with press-in studs, and regreasable Timken® tapered roller bearings.

$320.00 $425.00

101550 12.75” TRASHWHEEL® ROW CLEANER REPLACEMENT: For use on the 400014R01 Hub. $73.00 N/A

103032R/L DAWN SCISSORWHEEL ROW CLEANER REPLACEMENT: For use on the 400156RH/LH Hub. $73.00 N/A

200015 14” TRASHWHEEL® ROW CLEANER REPLACEMENT: For use on the 400014R01 Hub. $73.00 N/A

1130A-SW

101550

12.75”

200015

14”

1130A-12.75 1136A-141136A-12.75

13”

103032L

13”

103032R

1130A-14

800.554.0007 | dawnequipment.com

© 2017 Dawn Equipment Co. Inc. 370 N. Cross, PO Box 497 Sycamore, Illinois 60178. Prices and specifications subject to change without notice. All prices are FOB Dawn Factory, Sycamore Illinois 60178.

Dawn Equipment Company Price List 3

TRASHWHEEL® ROW CLEANER MOUNTS

Model # Description List Price

1140-1TRASHWHEEL® MOUNT FOR POST-1993 KINZE W/ SPRING DOWN PRESSURE AND WHITE 6000 SERIES PLANTERS: Easy, precise acme screw depth-adjustment with Dawn patented handle. Make adjustments standing up, not under the planter. Wide back plate may also be used on JD 7200 and later with std. links and scrapers. JD generally uses 1140-2.

$105.00

1140-2TRASHWHEEL® MOUNT FOR JOHN DEERE 7200/7300/1700 SERIES PLANTERS EQUIPPED WITH STANDARD PARALLEL LINKS AND STANDARD SCRAPERS: Easy, precise acme screw depth-adjustment with Dawn patented handle. Make adjustments standing up, not under the planter. Screw-adjust stays free if zerk under handle is greased annually.

$105.00

1140-5TRASHWHEEL® MOUNT FOR JOHN DEERE 7000/7100 and PRE-1993 KINZE PLANTERS: This mount will ONLY fit the John Deere 7000/7100 series and early (pre-1993) Kinzes with lower link cross member halfway between toolbar and row unit.

$105.00

1140-2spcl3.25TRASHWHEEL® MOUNT FOR JOHN DEERE 7200/7300/1700 SERIES PLANTERS EQUIPPED WITH STANDARD PARALLEL LINKS AND OPTIONAL EXTERNAL “HEAVY-DUTY” SCRAPERS: Same easy acme screw adjustment as the 1140-2, except the stem is moved forward 1” to clear the heavy-duty scrapers.

$105.00

1140-2spcl6.25TRASHWHEEL® MOUNT FOR JOHN DEERE 7200/7300/1700 SERIES PLANTERS EQUIPPED WITH LONG PARALLEL LINKS: Same easy acme screw adjustment as the 1140-2, except the stem is moved forward 4” to clear the cross support of the long parallel link.

$105.00

1140W-1TRASHWHEEL® MOUNT FOR WHITE 8000 SERIES PLANTERS: Same as 1140-1 except outer holes slotted for White 8000 planters. May be used in 1140-1 applications. For all White 6000 series and 8000 series with internal down pressure springs.

$105.00

1140W-5TRASHWHEEL® MOUNT FOR WHITE 8000: For use with 8000 series row unit with air down pressure or external down pressure springs. For units with air bags. (NOT PICTURED, see 1140-5) $116.00

1140K-1TRASHWHEEL® MOUNT FOR KINZE PLANTERS EQUIPPED WITH KINZE PNEUMATIC DOWN PRESSURE: This mount is for all Kinze planters with air-bags. Adjust with Dawn specialty handle, or with a speed wrench and socket. K Series mounts requires K Series stem assembly.

$116.00

1140-12TRASHWHEEL® MOUNT FOR WHITE 9000: For use with 9000 series row unit with air down pressure or external down pressure springs. For units with air bags. (NOT PICTURED) $105.00

1140K-1

front viewside view

3.25”

.625”

2.25”

2.25”

1140W-1

2.25”

6.25”

1140-1 1140-2 1140-5

1140-2spcl3.25 1140-2spcl6.25



COULTERS

Model # Description List Price(mount only)

List Price(w/

trashwheels)

1500-RH 1500-LH

“ADD-ON” COULTER FOR JOHN DEERE 7200/7300/1700 SERIES W/ STD LINKS, WHITE 6000 SERIES AND POST-1993 KINZE: This mount allows you to convert your Trashwheels® row cleaners to coulter combination options. Available with your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter.

$295.00 N/A

1500-RH-3.251500-LH-3.25

“ADD-ON” COULTER FOR JOHN DEERE 1700 SERIES PLANTERS EQUIPPED WITH HEAVY-DUTY SCRAPERS: This mount allows you to convert your Trashwheels® row cleaners to coulter combination options. Available with your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter. Requires 1140-3.25.

$295.00 N/A

1500-RH-6.251500-LH-6.25

“ADD-ON” COULTER FOR JOHN DEERE 1700 SERIES PLANTERS EQUIPPED WITH LONG PARALLEL LINKS: This mount allows you to convert your Trashwheels® row cleaners to coulter combination options. Available with your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter. Requires 1140-6.25.

$295.00 N/A

1500W-RH1500W-LH

“ADD-ON” COULTER FOR WHITE PLANTERS: This mount allows you to convert your Trashwheels® row cleaners to coulter combination options. Available with your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter. Not available on White 5000 series planters. Requires 1140W.

$295.00 N/A

1520BASIC COULTER FOR JOHN DEERE 7200/7300/1700 SERIES, WHITE 6000 SERIES AND POST-1993 KINZE: This tool is commonly used on the rear of a JD split-row (exe. 1790), or planters that will no-till beans into corn stalks. 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter available.

$255.00 N/A

1520WBASIC COULTER FOR WHITE PLANTERS: This tool is commonly used on the lift rows of a “multi-crop” planter, or White planters that will no-till beans into corn stalks. Available with your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter. Not available on White 5000 series planters.

$255.00 N/A

NOTE: Planters with a hex shaft mounted below the toolbar require travel limiter kit number 400128 to prevent damage to the shaft.

90638-Wave

.85” .75”

.5” .25”

906413-Wave

908925-Wave

9065Ripple

1500-RH 8-Wave

1500-3.25-RH 13-Wave

1500-6.25-RH 25-Wave

1520 13-Wave

1520 Ripple

REPLACEMENT PRICING AVAILABLE

ON PAGE 20




COULTER/TRASHWHEEL® COMBINATIONS

Model # Description List Price(mount only)

List Price(with

trashwheels)

1572-RH1572-LH

1572 TRASHWHEELS® ROW CLEANER / COULTER COMBINATION FOR JOHN DEERE 7200/7300/ 1700 SERIES W/ STD LINKS & POST-1993 KINZE: This combination unit is our most versatile on 30”. Can be modified to handle most field conditions. Available with 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter.

$345.00 $665.00

1572-RH-3.251572-LH-3.25

1572 TRASHWHEELS® ROW CLEANER/COULTER COMBINATION FOR JOHN DEERE 1700 SERIES PLANTERS W/ STD LINKS EQUIPPED W/ HEAVY-DUTY SCRAPERS: Please remember to let us know if your planter has HD scrapers. Available with your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter.

$345.00 $665.00

1572-RH-6.25 1572-LH-6.25

1572 TRASHWHEELS® ROW CLEANER / COULTER COMBINATION FOR JOHN DEERE 1700 SERIES PLANTERS EQUIPPED WITH LONG PARALLEL LINKS: Please remember to let us know if your planter has long parallel links. Available with your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter.

$345.00 $665.00

1572W-RH1572W-LH

1572 TRASHWHEELS® ROW CLEANER / COULTER COMBINATION FOR WHITE 6000 AND 8000 PLANTERS: This combination unit is our most versatile. It can be modified to handle most field conditions. Ideal for 30” centers. Available with your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter.

$345.00 $665.00

1572A-RH1572A-LH

1572 TRASHWHEELS® ROW CLEANER / COULTER COMBINATION FOR WHITE 9000 SERIES PLANTERS: This combination unit is our most versatile. It can be modified to handle most field conditions. Ideal for 30” centers. Available with your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter.

$345.00 $665.00

1572K-RH1572K-LH

1572 TRASHWHEELS® ROW CLEANER / COULTER COMBINATION FOR KINZE PLANTERS EQUIPPED WITH PNEUMATIC DOWN PRESSURE: Ideal for 30” centers. If you have a Kinze planter with pneumatic down-pressure, this mount will resolve interference problems with the airbag. If you have a Kinze with spring DP, order the standard 1572.

$345.00 $665.00

400128KIT, ROW TRAVEL LIMITER: Row travel limiter for planters with hex drive shafts under tool bar, bolts to lower parallel link. Includes 1 right hand and 1 left hand for one row plus hardware. Suggested for planters with mechanical meter drive shafts under the planter.

$22.00

NOTE: Planters with a hex shaft mounted below the toolbar require travel limiter kit number 400128 to prevent damage to the shaft.

1572-LH13-Wavew/ 1130A

1572-3.25-RH13-Wavew/ 1130A

1572-6.25-RH25-Wavew/ 1130A

1572-RHRipplew/ 1130A

1572K-RH13-Wavew/ 1130A



NOTE: Any planter with a hex drive located beneath the toolbar requires kit number 400128, a travel limiter to eliminate interference from the coulter.


2003-RH2003-LH

DAWN 2003 TRASHWHEELS® ROW CLEANER / COULTER COMBINATION FOR JOHN DEERE 7200/7300/ 1700 SERIES WITH STANDARD LINKS AND POST-1993 KINZE: Available with 12.75” or 14” Trashwheels®. For narrow rows, 20” and 22” centers. Your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter.

$535.00

2003W-RH2003W-LH

DAWN 2003 TRASHWHEELS® ROW CLEANER / COULTER COMBINATION FOR WHITE PLANTERS: Available with 12.75” or 14” Trashwheels®. For narrow rows, 20” and 22” centers. Your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter. Can not be used on the White 5000 series planters.

$535.00

2003K-RH2003K-LH

DAWN 2003 TRASHWHEELS® ROW CLEANER / COULTER COMBINATION FOR KINZE PLANTERS EQUIPPED WITH PNEUMATIC DOWN PRESSURE: Available with 12.75” or 14” Trashwheels®. For narrow rows, 20” and 22” centers. Your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter.

$535.00

2003-RH-3.252003-LH-3.25

DAWN 2003 TRASHWHEELS® ROW CLEANER / COULTER COMBINATION FOR JOHN DEERE PLANTERS EQUIPPED WITH STANDARD LINKS & JOHN DEERE “HEAVY-DUTY” SCRAPERS: Available with 12.75” or 14” Trashwheels®. For narrow rows, 20” and 22” centers. Your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter.

$535.00

2003-RH-6.252003-LH-6.25

DAWN 2003 TRASHWHEELS® ROW CLEANER / COULTER COMBINATION FOR JOHN DEERE PLANTERS EQUIPPED WITH STANDARD LINKS & JOHN DEERE LONG PARALLEL LINKS: Available with 12.75” or 14” Trashwheels®. For narrow rows, 20” and 22” centers. Your choice of 16” 8-Wave, 13-Wave, 25-Wave or Ripple Coulter.

$535.00

COULTER/SINGLE TRASHWHEEL® COMBINATIONS

2003-RHw/ 14” Trashwheel

2003-3.25-RHw/ 14” Trashwheel

2003-6.25-RHw/ 14” Trashwheel

2003W-RHw/ 14” Trashwheel

2003K-RHw/ 14” Trashwheel




Model # Description List Price(basic)

List Price(with depth

bands)

4010FLOATING TRASHWHEELS® FOR JOHN DEERE 7200/7300 & 1700 SERIES WITH STANDARD PARALLEL LINKS, MOST POST-1993 KINZE, AND WHITE 6000 SERIES PLANTERS: Heavy-duty row unit mounted Dawn floating row cleaner with Dawn acme screw depth adjustment. Available with 12.75” or 14” Trashwheels®.

$535.00 $570.00

4010-3.25FLOATING TRASHWHEELS® FOR JOHN DEERE 1700 SERIES EQUIPPED WITH OPTIONAL EXTERNAL “HEAVY-DUTY” SCRAPERS AND STANDARD PARALLEL LINKS: Same as 4010, except depth adjustment handle moved 1” forward to clear JD optional HD Scrapers.

$535.00 $570.00

4010-6.25FLOATING TRASHWHEELS® FOR JOHN DEERE 1700 SERIES EQUIPPED WITH LONG PARALLEL LINKS AND ALL SCRAPERS: Same as 4010, except depth adjustment handle moved 4” forward to clear the cross support of the long parallel link.

$535.00 $570.00

4010KFLOATING TRASHWHEELS® FOR KINZE PLANTERS EQUIPPED WITH PNEUMATIC DOWN PRESSURE: This mount is for all Kinze planters with air-bags. Adjust with Dawn specialty handle, or with a speed wrench and socket. 14” or 12.75” Trashwheels®.

$550.00 $585.00

4010WFLOATING TRASHWHEELS® FOR WHITE 6000 AND 8000 SERIES PLANTERS: Floating row cleaner available with 14” or 12.75” Trashwheels®. Add “-DB” to your model for wheels equipped with depth bands. If you own a White 6000 and will move to an 8000 order this model. If you will move to Kinze or JD order 4010.

$535.00 $570.00

4010AFLOATING TRASHWHEELS® FOR WHITE 9000 SERIES PLANTERS: Floating row cleaner available with 14” or 12.75” Trashwheels®. Add “-DB” to your model for wheels equipped with depth bands. (NOT PICTURED)

$535.00 $570.00

4010-5FLOATING TRASHWHEELS® FOR JOHN DEERE 7000/7100 SERIES AND PRE-1993 KINZE PLANTERS: Floating row cleaner available with 14” or 12.75” Trashwheels®. This model is not compatible with later model John Deere Planters.

$535.00 $570.00

TRASHWHEEL® FLOATING ROW CLEANERS

4010-DB

4010W-DB 4010K-DB

4010-DB-3.25 4010-DB-6.25

4010-DB-5




1202 RH1202 LH

CURVETINE® M-SERIES CLOSING WHEEL: Toothed wheel with modular hub (400156). This closing wheel follows in the original footsteps of Dawn closing wheel to provide a versatile tool appropriate for a wide variety of conditions. $130.00

1203 RH1203 LH

FURROWFLEX M-SERIES CLOSING WHEEL: Heavy duty steel rim and soft rubber tire easily sheds mud in worked grounds. Comes complete with modular hub (400156) and wrench (90431) for easy installation. $130.00

1204 RH1204 LH

GAUGETINE M-SERIES CLOSING WHEEL: Modular closing wheel with limited tooth profile for shallow planting conditions. Comes complete with modular hub (400156) and wrench (90431) for easy installation. $130.00

1205 RH1205 LH

IRON-M M-SERIES WHEEL: Cast iron wheel with modular hub (400156). your operation may benefit from the use of a cast iron closing wheel The weight difference allows you to use more range on your tail-piece down force spring. $130.00

1206 RH1206 LH

CURVETINE® M-SERIES CLOSING WHEEL JD TWIN-ROW / MONOSEM: Toothed wheel with modular hub (400156).For Monosem and JD Twin-Row planters. $135.00

1230 RH1230 LH

GAUGETINE CLOSING WHEEL: Wheel and adapter kit (400166) for JD 1860/1890 series openers. $68.00

102540F REPLACEMENT CURVETINE® M-SERIES WHEEL: Replacement toothed wheel without hub. $68.00

102598C REPLACEMENT GAUGETINE CLOSING WHEEL: Replacement toothed wheel without hub. $68.00

400159 REPLACEMENT FURROWFLEX WHEEL: Replacement wheel without hub. $60.00

102681 REPLACEMENT IRON-M WHEEL: Replacement wheel without hub. $65.00

400156 RH400156 LH

M-SERIES MODULAR HUB: High quality drop-forged hub body with American made Timken® tapered roller bearings in right and left handed versions. They bolt all of the M-Series closing wheels. $94.00

400166 RH400166 LH

GAUGETINE ADAPTER KIT: For applications without a bearing on JD 1860/1890 series openers with bearing in the arm. $24.00

400187 RH400187 LH GAUGETINE ADAPTER KIT: For applications without a bearing on JD 1850 series openers with bearing in the wheel. $94.00

90431 REPLACEMENT WRENCH: Slim Profiled 1 3/8" for easy installation of modular hubs $6.00

102151 1/2 RATE SPRING REPLACEMENT: Allows you to use the full range of adjustment on your closing wheel tail-piece. $12.50

M-SERIES CLOSING WHEELS

CURVETINE - 1202 RH/LHWHEEL & MODULAR HUB

FURROWFLEX - 1203 RH/LH

102540F REPLACEMENT WHEEL

400159REPLACEMENT WHEEL

400156 RH/LH 9043110066

100665

12” 12”13”

400166 RH/LH

GAUGETINE - 1204 RH/LHWHEEL & MODULAR HUB

IRON M - 1205 RH/LHWHEEL & MODULAR HUB

102598CREPLACEMENT WHEEL

102681 REPLACEMENT WHEEL

13”

400187 RH/LH





5010-12.75GROUND EFFECTS (GFX) REMOTE-ADJUST, TRAILING-ARM, FLOATING ROW CLEANER WITH 12.75” TRASHWHEELS®: GFX row cleaner with 12.75” Trashwheel®. Good for narrow rows (20” and 22”). Height and down pressure fully adjustable from the cab with the Dawn 400124 Electro-Hydraulic Control System.

$1145.00

5010-DB-12.75GROUND EFFECTS (GFX) REMOTE-ADJUST, TRAILING-ARM, FLOATING ROW CLEANER WITH 12.75” TRASHWHEELS® AND DEPTH BANDS: Some field conditions require the use of our poly depth bands. Please call for advice on the use of depth bands on the GFX unit.

$1180.00

5010-14GROUND EFFECTS (GFX) REMOTE-ADJUST, TRAILING-ARM, FLOATING ROW CLEANER WITH 14” TRASHWHEELS®: May be set “offset” or “intersecting” depending on field conditions. Height and down pressure fully adjustable from the cab with the Dawn (400124) Electro-Hydraulic Control System.

$1145.00

5010-DB-14GROUND EFFECTS (GFX) REMOTE-ADJUST, TRAILING-ARM, FLOATING ROW CLEANER WITH 14” TRASHWHEELS® AND DEPTH BANDS: Some field conditions require the use of our poly depth bands. Please call for advice on the use of depth bands on the GFX unit.

$1180.00

5010-SWGROUND EFFECTS (GFX) REMOTE-ADJUST, TRAILING-ARM, FLOATING ROW CLEANER WITH DAWN SCISSORWHEELS: May be set “offset” or “intersecting” depending on field conditions. Height and down pressure fully adjustable from the cab with the Dawn (400124) Electro-Hydraulic Control System.

$1145.00

5010-DB-SWGROUND EFFECTS (GFX) REMOTE-ADJUST, TRAILING-ARM, FLOATING ROW CLEANER WITH DAWN SCISSORWHEELS AND DEPTH BANDS: Some field conditions require the use of our poly depth bands. Please call for advice on the use of depth bands on the GFX unit, especially with Scissorwheels.

$1180.00

400221FX ELECTRO-HYDRAULIC CONTROL SYSTEM: This system includes an electro-hydraulic valve module, auxiliary electronic and quick connect hydraulic lines, and a RAM®-mounted, in-cab, electronic controller with bright digital display. One control system is required per planter for Dawn Ground Effects Row Cleaner operation.

$2195.00

400223 FX ELECTRO-HYDRAULIC TWO SECTION CONTROL: Add-on control kit for manually controlling multiple sections of Dawn FX tools. This kit includes all components for two sections of control. $3990.00

300388-UNIV GFX SET BACK KIT: Mounting assembly for Deere and some Bauer bars. Shifts GFX back by 1.8" and shifts row unit back 2.5". Mount and row unit set back for Deere and Bauer planters near wing wheels. $210.00

300388-CASE KIT, SET BACK MOUNT, GFX FOR CASE, SHIFTS GFX BACK BY 1.8” & ROW UNIT BACK 2.5”. Includes setback plates, hardware and pro shaft extension kit. 195.00

300452 GFX TRAVEL STOP KIT: Recommended when using 14” Trashwheels®. $12.00

HYDRAULIC PLANTER ATTACHMENTS - GFX

Gfx5010DB-12.75

plantertoolbar

planterrow unit

Hydraulic Down Pressure

SpringUp Lift

400221Electro-Hydraulic Control System

(A) 300374(B) 90382-8 (C) 90382-4(D) 90382-9(E) 90382-5(F) 90382-3(G) 90382-2(H) 90119-R3(I) 90382-1(J) 90119_R1-3

E

F

GH

IJ

A

B C

D


ON PAGE 22

101550-12.75 for 12.75" Trashwheels

103032R/103032L

-SW for ScissorWheels

200015-14 for 14" Trashwheels




5028

REFLEX ACTIVE PLANTER SUSPENSION: The most advanced row unit down pressure system available. Reflex boasts 6mS response time with new digital valve technology. Integral accumulators on both up and down force damp oscillations on the planter row units, improving ride and reducing wear. The integral micro-controller and hydraulic manifold allow for integration with the GFX Hydraulic Row Cleaner, and CFX Hydraulic Fertilizer Opener. There are also built-in connections for Dawn's new Active Depth Control (AutoDepth), and Active Hydraulic Closing System (AutoClose)

$1595.00

5031REFLEX ACTIVE PLANTER SUSPENSION WITH GFX HYDRAULIC ROW CLEANER CONTROL: This model contains the connectivity and associated hydraulics for running the GFX off the REFLEX manifold. This is an industry first row-by-row residue manager. Target and hold a specific pressure on your row cleaner regardless of ground conditions.

$1795.00

400265 REFLEX TRACTOR INTERFACE KIT: This kit includes CAN/computer interface, wiring harness, hydraulic filter, and hydraulic hoses to connect to tractor. One kit is required per planter. $2995.00

HYDRAULIC PLANTER ATTACHMENTS - REFLEX

side view

rear viewrear isometric

view

strain gauge

REFLEX BASIC5028

NOTE: YOU MUST SPECIFY YOUR PLANTER MANUFACTURER,

MODEL, AND PARALLEL LINK LENGTH TO ENSURE YOU RECEIVE

THE CORRECT PARTS.





5040R5040L

CFX BASIC ASSEMBLY: Cfx base unit includes primary assembly and manual controlled Rfx down-pressure unit. This configuration requires use of original Dawn FX manual control kit (400124). CFX offered with choice of either dry or liquid fertilizer kit included in base price.

$1750.00

300496 REPLACEMENT DRY FERTILIZER KIT: Optional kit for application of dry fertilizer. $105

300497 REPLACEMENT LIQUID FERTILIZER KIT: Optional kit for application of liquid fertilizer. $105

400221FX ELECTRO-HYDRAULIC CONTROL SYSTEM: This system includes an electro-hydraulic valve module, auxiliary electronic and quick connect hydraulic lines, and a RAM®-mounted, in-cab, electronic controller with bright digital display. One control system is required per planter for Dawn Ground Effects Row Cleaner operation.

$2195.00

HYDRAULIC PLANTER ATTACHMENTS - CFX

side view

top view

CFX5040

E

F

GH

I

(A) 300374(B) 90382-8 (C) 90382-4(D) 90382-9(E) 90382-5(F) 90382-3(G) 90382-2(H) 90119-R3(I) 90382-1(J) 90119_R1-3

A

B C

D

400221 Electro-Hydraulic Control System

DRY FERTILIZER ATTACHMENT 300496

LIQUID FERTILIZER ATTACHMENT 300497

J


ON PAGE 22



PNEUMATIC PLANTER ATTACHMENTS


5009-DB-12.755009-DB-145009-DB-SW

GFX - P PNEUMATIC TRAILING-ARM FLOATING ROW CLEANER WITH 12.75" OR 14" TRASHWHEELS AND DEPTH BANDS: GFX-P Pneumatic row cleaner with 12.75” Trashwheel® featuring DAWN's Pneumatic Cylinder. Some field conditions require the use of our poly depth bands. Please call for advice on the use of depth bands on the GFX unit. Please call for available mounting options. Good for narrow rows (20” and 22”).

$899.00

5009-12.75 5009-14

5009-SWGFX - PNEUMATIC FLOATING ROW CLEANER WITH 12.75" OR 14" TRASHWHEELS: GFX-P Pneumatic row cleaner with 12.75” Trashwheel® featuring DAWN's Pneumatic Cylinder. $870.00

5009GFX - PNEUMATIC FLOATING ROW CLEANER WITH MODULAR HUB SET: GFX-P Pneumatic row cleaner with 12.75” Trashwheel® featuring DAWN's Pneumatic Cylinder and a modular hub set for individuals who would rather use trashwheels that they already own but still want benefit from using GFX.

$799.00

5008-DB-12.755008-DB-145008-DB-SW

GFX - PNEUMATIC FLOATING ROW CLEANER WITH 12.75" OR 14" TRASHWHEELS & DEPTH BANDS & THIRD PARTY CYLINDER KIT: Some field conditions require the use of our poly depth bands. Please call for advice on the use of depth bands on the GFX unit. Please call for available mounting options. Good for narrow rows (20” and 22”).

$750.00

5008-12.755008-145008-SW

GFX - PNEUMATIC FLOATING ROW CLEANER WITH 12.75" OR 14" TRASHWHEELS & THIRD PARTY CYLINDER KIT: GFX-P Pneumatic row cleaner with 12.75" or 14" Trashwheels® with a third-party Pneumatic Cylinder mounting kit. Please call for available mounting options. Good for narrow rows (20” and 22”).

$720.00

90633 CYLINDER REPLACEMENT KIT: Dawn's pneumatic Cylinder kit. Control kit sold separately. $120.00

400219 CONTROL KIT: The control kit includes the Dawn Electro-Pneumatic in-cab, RAM mounted controller, and all required hoses and fittings. $1040.00

GFX-P

5009 - DB - 12.75 5009 -12.75 5009

IIIIIIIIIIIIII II II II II II I

I I II I I I

I I I I I I I I I I I I I I I I I I I I I I I I I I I IIIIIIIIIIII

IIIIIIIIIIIIII II II II II II I

I I II I I I

I I I I I I I I I I I I I I I I I I I I I I I I I I I IIIIIIIIIIII

400219

101550-12.75 for 12.75" Trashwheels

103032R/103032L

-SW for ScissorWheels

200015-14 for 14" Trashwheels




GFX-P


3333-RHPLURIBUS HIGH SPEED STRIP-TILL ROW UNIT: Generation 5 Pluribus Strip-Till Unit. This updated unit features walking tandem gauge wheels. RFX Hydraulic Down Force, with MiFx control. An integral hydraulic cylinder controls the floating Trashwheels. Deflectors direct and contain soil to keep a uniform, cohesive strip.

$3750.00

3333-LHPLURIBUS HIGH SPEED STRIP-TILL ROW UNIT: Generation 5 Pluribus Strip-Till Unit. This updated unit features walking tandem gauge wheels. RFX Hydraulic Down Force, with MiFx control. An integral hydraulic cylinder controls the floating Trashwheels. Deflectors direct and contain soil to keep a uniform, cohesive strip.

$3750.00

201167R201167L

INCORPORATING DRY “HIGH OUTPUT” FERTILIZER TUBE FOR PLURIBUS STRIP-TILL UNIT: A 2.5” stainless steel tube for delivering dry fertilizer into the primary tilling zone. Thoroughly incorporates dry fertilizer into the profile of the strip. Designed for high rates of product (exe. Montag “High-Output” fertilizer cart.).

$110.00

300690L300690R

BANDING LIQUID FERTILIZER TUBE FOR PLURIBUS STRIP-TILL UNIT: This 1/2” stainless steel tube is typically used for the application of moderate amounts of liquid fertilizer. Runs in the shadow of either the left or right rear coulters. Great for spring applied 28% or 32%.

$40.00

400221FX MANUAL ELECTRO-HYDRAULIC CONTROL SYSTEM: This system includes an electro-hydraulic valve module, auxiliary electronic and quick connect hydraulic lines, and a RAM®-mounted, in-cab, electronic controller with bright digital display.

$2195.00

400164 TRACTOR INTERFACE KIT: This kit includes CAN/computer interface, wiring harness, hydraulic filter, and hydraulic hoses to connect to tractor. One kit is required per planter.

$2495.00

3333 PLURIBUS GEN 5 STRIP-TILL

side view

A

top view

3333 Pluribus Strip-Till

Options:(A) 201167R 201167L(B) 300690R 300690L

B

Dawn Equipment Company Price List dawnbiologic.com | 888.871.3296


14

ZRX ROLLER/CRIMPER


5050ZRX ROLLER / CRIMPER MAIN ASSEMBLY: This assembly includes the main support, hydraulic cylinder, and opening discs for the ZRX. The roller/crimper sub-assembly fastens to the main assembly during installation. Installation requires one of these main assemblies per row.

$1025.00

5051ZRX ROLLER / CRIMPER MAIN ASSEMBLY FOR TIGHT GEOMETRY: This assembly includes the main support, hydraulic cylinder, and opening discs for the ZRX. The roller/crimper sub-assembly fastens to the main assembly during installation. Installation requires one of these main assemblies per row.

$1025.00

400200 30" STANDARD ROLLER: For use on 30" centers, on rows that are not on the end of the toolbar, and not on flex rows. $545.00

400201R/400201L 30" FLEX ROLLER: For use on 30" centers, on flex rows only. $825.00

400202R/400202L

30" END ROLLER ASSEMBLY: For use on 30" centers, on the end rows. A 400202R on the right-hand side, and a 400202L on the left-hand side of the planter. This kit includes an end roller and a 30" standard roller for each end of the planter.

$825.00

300570 MOUNT KIT, STANDARD POSITION: Standard mount. $139.00

300571 MOUNT KIT, REAR SHIFT: Shifts row unit back ~ 6 in. $139.00

300572 MOUNT KIT, FORWARD SHIFT: Shifts row unit forward ~ 10 in. $295.00

400209 MANUAL PRESSURE CONTROL MANIFOLD KIT: Kit includes the P/N 90737 manual hydraulic manifold, hoses to connect to tractor SCV, and a regulated pressure hose back to the main tee fitting on the toolbar. $550.00

400124 FX ELECTRO-HYDRAULIC CONTROL SYSTEM: This system includes an electro-hydraulic valve module, auxiliary electronic and hydraulic lines, and a RAM®-mounted, in-cab, electronic controller with bright digital display. One control system is required per planter for each FX tool. Please contact Dawn for order details.

$2195.00

400200

400202R

5050+300570

5050 + 400200+ 300570

ZRX 4-GANG

400209

Dawn Equipment Company Price List 888.871.3296 | dawnbiologic.com


15

DUOSEED II - ULTRA-NARROW SEEDER


5065R DUOSEED INTER-ROW SEEDER LONG LINK RIGHT-HAND UNIT: This assembly is the right-hand trailing member of a standard Duoseed pair. The parallel linkage is 14" bolt-to-bolt. You should order half left and half right units to balance the right and left hand sides of the toolbar.

$800.00

5065L DUOSEED INTER-ROW SEEDER LONG LINK LEFT-HAND UNIT: This assembly is the left-hand trailing member of a standard Duoseed pair. The parallel linkage is 14" bolt-to-bolt. You should order half left and half right units to balance the right and left hand sides of the toolbar.

$800.00

5064RDUOSEED INTER-ROW SEEDER SHORT LINK RIGHT-HAND UNIT: This assembly is the right-hand leading member of a standard Duoseed pair. The parallel linkage is 11.5" bolt-to-bolt. You should order half left and half right units to balance the right and left hand sides of the toolbar.

$800.00

5064LDUOSEED INTER-ROW SEEDER SHORT LINK LEFT-HAND UNIT: This assembly is the right-hand leading member of a standard Duoseed pair. The parallel linkage is 11.5" bolt-to-bolt. You should order half left and half right units to balance the right and left hand sides of the toolbar.

$800.00

201147 DUOSEED STANDARD SEED TUBE: Use this tube for the delivery of cover crop seed. $40.00

400219 IN-CAB ELECTRO-PNEUMATIC PRESSURE REGULATOR: This is an in-cab electro-pneumatic controller for Dawn pneumatic tools. Control two channels of regulated pressure with a simple switch. $1040.00

400123 BASIC MANUAL PNEUMATIC REGULATOR: This is a simple manual pneumatic regulator with an integral pressure gauge. This kit includes tubing and adapters to connect pneumatic actuators. $165.00

5064L

5065R

5064Ltop viewside view

side view

5064R & 5065LShown separated by 10in.

201147



ITEM # KITS & PARTS - TRASHWHEELS, COULTERS & COMBINATIONS List Price

1710 KIT, HEAVY DUTY SPRING DOWN PRESSURE FOR JOHN DEERE & KINZE PLANTERS: Increases overall row unit down pressure by 180lbs. Kit includes: 4 (100096) Heavy-duty Spring 1 5/8” OD, 8 (100095) Step Bushing, mounting hardware. $64.00

1711 KIT, HEAVY DUTY SPRING DOWN PRESSURE FOR WHITE PLANTERS: Increases overall row unit down pressure by 180lbs. Kit includes: 4 (100241) Heavy-duty Spring 1.25” OD, 8 (100095) Step Bushing, mounting hardware. $64.00

1720 KIT, DAWN SUPERLINK FOR JOHN DEERE 7000 & KINZE PLANTERS: Kit includes: 2 (200117) Superlinks, 10 (9032) FW 5/8 x 1.29, 6 (9078) HHCS 5/8-11 x 2, 8 (9142) 5/8-11 NUT, 2 (9154) HHCS 5/8-11 x 2.5, 1 Chain $335.00

1722 KIT, DAWN SUPERLINK FOR JOHN DEERE 7200 & 7300: Kit includes: 1 (200116) Superlink, 1 (200123) Superlink 10 (9032) FW 5/8 x 1.29, 6 (9078) HHCS 5/8-11 x 2, 8 (9142) 5/8-11 NUT, 2 (9154) HHCS 5/8-11 x 2.5, 1 Chain $335.00

1740 KIT, EXTENSION/SETBACK FOR USE WITH JOHN DEERE NO-TILL COULTERS: This kit is for JD 7200 &1700 series planters with frame mounted no-till coulter. Kit includes: 2 (101093) 3.5” Offset Plate, mounting hardware, roller chain. $81.00

1750 KIT, POWERLINK KIT FOR DAWN NO-TILL COULTERS: A much more durable lower parallel link kit for use with Dawn coulters that might otherwise interfere with lower parallel link cross braces on JD 7000, 7100 and Kinze units. $172.50

1900 KIT, G-SERIES SPOKED GAUGE WHEEL, WIDE: Spoked gauge wheel for planter row units. Kit includes 2 (90572) 4.5" wide spoked gauge wheel , 6 (102695) 16 GA shim washer $300.00

1901 KIT, G-SERIES SPOKED GAUGE WHEEL, NARROW: Spoked gauge wheel for planter row units. Kit includes 2 (90573) 3.25" wide spoked gauge wheel , 6 (102695) 16 GA shim washer $300.00

9053 KIT, HARDWARE FOR ROW UNIT MOUNTED TOOLS ON CASE: Hardware for most Dawn row unit mounted tools. Kit includes: 2 (9007R1) 1/2-13 flange lock nut, 2 (9038) HHCS 1/2-13 x 3 $3.00

9056 KIT, HARDWARE FOR ROW UNIT MOUNTED TOOLS ON JD, KINZE & WHITE: Hardware for most Dawn row unit mounted tools. Kit includes: 4 (9007R1) 1/2-13 flng lock nut, 4 (9046) HHCS 1/2-13 x 1.25, 4 (9003) FW 1/2 x 1.06 $4.50

9115 KIT, TRASHWHEEL HUB HARDWARE, 1” SHAFT FOR TRASHWHEELS® AND COULTERS: This is the basic hub for all Trashwheels® and coulters. Includes bearings, shaft, Supercap and hardware. $4.50

9169 KIT, HARDWARE FOR COULTER HUB: Hardware for hub and stem on all coulters. Kit includes: 3 (9007R1) 1/2-13 flange lock nut, 3 (9088) HHCS 1/2-13 x 1.75, 1 (9032) FW 5/8 x 1.29, 1 (9270) HHCS 5/8-11 x 1.75. $4.50

200025KIT, HUB REPAIR FOR 5/8 HUB (400014R01): We recommend you have 1 or 2 of these in your shop. Kit includes: 2 (9015) Bearing Cups, 2 (9016) Bearing Cones, 1 (9017) triple-lip seal, 1 (9018) seal wear ring, 1 (9019) cotter pin, 1 (9024) 3/4” castle nut, 1 (9028) tongue washer, 1 (9662R1) o-ring 1 3/4 ID x 1 7/8 OD, 1 (9785) pipe plug.

$40.00

200025-3/4KIT, HUB REPAIR FOR 3/4 HUB (400106): Kit includes: 1 (9015) 1" Bearing Cup, 1 (9016) 1" Bearing Cone, 1 (9035) 1.25"Bearing Cup, 1 (9910) 1.25" Bearing Cone, 1 (9907) triple-lip seal, 1 (9018) seal wear ring, 1 (9019) cotter pin, 1 (9024) 3/4” castle nut, 1 (9028) tongue washer, 1 (9662R1) o-ring 1 3/4 ID x 1 7/8 OD, 1 (9785) pipe plug.

$42.00

200031 KIT, SEAL REPLACEMENT FOR 1” SHAFT HUB (400014R01) : This is another handy kit to have a couple of. Kit includes: 1 (9017) triple-lip seal, 1 (9018) seal wear ring, 1 (9662R1) o-ring 1 3/4 ID x 1 7/8 OD. $11.00

200031-3/4 KIT, SEAL REPLACEMENT FOR 1.25” SHAFT HUB (400106) : This is another handy kit to have a couple of. Kit includes: 1 (9907) triple-lip seal, 1 (9909_R2) seal wear ring, 1 (9662R1) o-ring 1 3/4 ID x 1 7/8 OD. $11.00

300192 KIT, EXTENSION KIT FOR SINGLE WHEEL ROW CLEANER: This kit converts dual Trashwheels to single Trashwheels on standard assemblies. Kit includes: 1 (101181-R3) extension bracket, 1 (9270) HHCS 5/8-11 x 1-3/4 $11.00

300041 KIT, REPLACEMENT HUB BODY 1” SHAFT FOR TRASHWHEELS® AND COULTERS: This will replace one hub body with 2 pressed in bearing cups (9015), and one wear ring (9018). $58.50

300192KIT, HUB EXTENSION FOR CONVERSION FROM DUAL TO SINGLE WHEEL TRASHWHEEL®: If you currently have dual Trashwheels®, this kit converts your Trashwheels® from 30” down to 15” centers. Kit includes: 1 (101181R3) hub extension, 1 (9270) HHCS 5/8-11 x 1.75, 3 (9069) 5/8 LW, 2 (9078) HHCS 5/8-11 x 2, 2 (9126) NUT 5/8-11.

$32.50

300286 KIT, REPLACEMENT HUB BODY 1” SHAFT FOR TRASHWHEELS® AND COULTERS: This will replace one hub body with 2 pressed in bearing cups (1x9015 & 1x9539), and one wear ring (9909_R2). $58.50

300297R300297L

KIT, REPLACEMENT 12.75” TRASHWHEEL®, HUB AND DEPTH BAND (1): This kit will entirely replace one missing 12.75” Trashwheel®, hub and depth band. Kit Includes: 1 (400014R01) hub, 1 (101550) 12.75” Trashwheel®, 1 (101782) Depth band for 12.75” Trashwheel®, and all mounting hardware.

$191.00

300461R300461L

KIT, REPLACEMENT 14” TRASHWHEEL®, HUB AND DEPTH BAND (1): This kit will entirely replace one missing 14” Trashwheel®, hub and depth band. Kit Includes: 1 (400014R01) hub, 1 (200015) 14” Trashwheel®, 1 (101333) Depth band for 14” Trashwheel®, and all mounting hardware.

$191.00

KITS & PARTS




ITEM # KITS & PARTS - TRASHWHEELS, COULTERS & COMBINATIONS List Price

300255-12.75 KIT, TWO COMPLETE DEPTH BANDS FOR 12.75” TRASHWHEEL®: Add depth bands to your floating Trashwheels® or GFX units. Kit includes: 2 (101782) Depth Bands, 6 (9077) HHCS 1/2-13 x 2.25. $67.50

300255-12.75-1 KIT, ONE COMPLETE DEPTH BAND FOR 12.75” TRASHWHEEL®: Add a single depth band to your floating Trashwheels® or GFX units! Kit includes: 1 (101782) 8.75” Diameter Depth Bands, 3 (9077) HHCS 1/2-13 x 2.25. $44.50

300255-14 KIT, TWO COMPLETE DEPTH BANDS FOR 14” TRASHWHEEL®: Add depth bands to your floating Trashwheels® or GFX units! Kit includes: 2 (101333) 10” Diameter Depth Bands, 6 (9077) HHCS 1/2-13 x 2.25. $67.50

300255-14-1 KIT, ONE COMPLETE DEPTH BAND FOR 14” TRASHWHEEL®: Add a single depth band to your floating Trashwheels® or GFX units! Kit includes: 1 (101333) 10” Diameter Depth Bands, 3 (9077) HHCS 1/2-13 x 2.25. $44.50

300493 KIT, RETAINER, K MOUNT: Secures depth adjust head on K-series Trashwheel mounts. $17.00

300540 KIT, BAYONET STRIPPERS FOR TRASHWHEELS® : Kit includes 1 (102593) Right hand bayonet stripper, 1 (102594) Left hand bayonet stripper. $30.00

400014-R1 KIT, COMPLETE HUB, 1” SHAFT FOR TRASHWHEELS® AND COULTERS: This is the basic hub for all Trashwheels® and coulters. Includes bearings, shaft, Supercap and hardware. $112.00

400054 KIT, TRIANGULAR SUPERCAP FOR TRASHWHEELS® AND COULTERS: Replacement Supercap for Trashwheels® and Coulters. Kit includes: 1 (100949) Trashwheels/Coulter Supercap, 2 (9662R1) o-ring 1 3/4 ID x 1 7/8 OD, 3 $16.50

400056KIT, REPLACEMENT 8-WAVE 16” COULTER & HUB: This kit will entirely replace one missing 8-Wave coulter and hub. Kit includes: 1 (400014) 1” shaft hub, 1 (9169) coulter hardware kit, 2 (00055) 1/4” triangular spacer, 1 (9063) 8-Wave 16” dia. coulter, 1 (9806) grease zerk.

$169.00

400057KIT, REPLACEMENT 13-WAVE 16” COULTER & HUB: This kit will entirely replace one missing 13-Wave coulter and hub. Kit includes: 1 (400014) hub, 1 (9169) coulter hardware kit, 2 (100055) 1/4” triangular spacer, 1 (9064) 13-Wave 16” dia. coulter, 1 (9806) grease zerk.

$169.00

400058KIT, REPLACEMENT 25-WAVE 16” COULTER & HUB: This kit will entirely replace one missing 25-Wave coulter and hub. Kit includes: 1 (400014) hub, 1 (9169) coulter hardware kit, 2 (100055) 1/4” triangular spacer, 1 (9089) 25-Wave coulter, 1 (9806) grease zerk.

$169.00

400059KIT, REPLACEMENT RIPPLE 16” COULTER & HUB: This kit will entirely replace one missing ripple coulter and hub. Kit includes: 1 (400014) hub, 1 (9169) coulter hardware kit, 2 (100055) 1/4” triangular spacer, 1 (9065) ripple 16” dia. coulter, 1 (9806) grease zerk.

$169.00

400076-12KIT, REPLACEMENT 12.75” TRASHWHEEL® & HUB (2): This kit will entirely replace two missing 12.75” Trashwheels® and hubs. Kit includes: 2 (400014) Dawn hub, 2 (101550) 12.75” Trashwheel, 2 (9115) Trashwheel® hardware kit, 2 (100882) formed stripper, 1 (9806) grease zerk.

$304.50

400076-12-1KIT, REPLACEMENT 12.75” TRASHWHEEL® & HUB (1): This kit will entirely replace one missing 12.75” Trashwheel® and hub. Kit includes: 1 (400014) hub, 1 (101550) 12.75” Trashwheel®, 1 (9115) Trashwheel® hardware kit, 1 (100882) formed stripper, 1 (9806) grease zerk.

$169.00

400076-14-1KIT, REPLACEMENT 14” TRASHWHEEL® & HUB (1): This kit will entirely replace one missing 14” Trashwheel® and hub. Kit includes: 1 (400014) Dawn hub, 1 (200015) 14” Trashwheel®, 1 (9115) Trashwheel® hardware kit, 1 (100882) formed stripper, 1 (9806) grease zerk.

$169.00

400076-14KIT, REPLACEMENT 14” TRASHWHEEL® & HUB (2): This kit will entirely replace two missing 14” Trashwheels® and hubs. Kit Includes: 2 (400014) Dawn hub, 2 (200015) 14” Trashwheel®, 2 (9115) Trashwheel® hardware kit, 2 (100882) formed stripper, 1 (9806) grease zerk.

$304.50

400085LP KIT, DEPTH ADJUST HANDLE REPLACEMENT KIT, NEW LOW PROFILE: Kit includes: 1 (102184) cast handle, 1 (102186) collar bushing, 1 (100053) 5/8 nylon washer, 1 (9032) FW 5/8 x 1.29 x .13, 1 (9845) spirol pin. $28.00

400085 KIT, DEPTH ADJUST HANDLE REPLACEMENT KIT, ORIGINAL: Kit includes: 1 (100046) cast handle, 1 (10035R1) collar bushing, 1 (100053) 5/8 nylon washer, 1 (9032) FW 5/8 x 1.29 x .13, 1 (9845) spirol pin. $28.00

400085-4010 KIT, DEPTH ADJUST HANDLE REPLACEMENT KIT FLOATING TRASHWHEELS®: Kit includes: 1 (100046) cast handle, 1 (10035R1) collar bushing, 1 (100053) 5/8 nylon washer, 1 (9032) FW 5/8 x 1.29 x .13, 1 (9999) groove pin. $28.00

400128 KIT, ROW TRAVEL LIMITER 3/4": Row travel limiter use with Dawn no-till coulters on planters with hex drive (mechanical drive) shafts under tool bar. 3/4” thick. $22.00

400129 KIT, ROW TRAVEL LIMITER 3/8": Row travel limiter use with Dawn no-till coulters on planters with hex drive (mechanical drive) shafts under tool bar. 3/8” thick.

$22.00

KITS & PARTS



ITEM # HYDRAULIC TOOLS List Price

90119-R3 CONTROL MANIFOLD WITH VALVE, GAUGE, AND PRESSURE SENSOR $1,245.00

90119-R1-1 REPLACEMENT SENSOR, PRESSURE TRANSDUCER FX TOOLS $350.00

90119-R1-2 REPLACEMENT VALVE, CARTRIDGE, FX TOOLS PRESSURE CONTROL : Does not include solenoid. $250.00

90119-R1-3 REPLACEMENT SOLENOID / DRIVER ASSEMBLY. $239.00

90119-R1-4 REPLACEMENT GAUGE, HYDRAULIC PRESSURE, 3000 PSI $85.00

90173 REPLACEMENT RAM MOUNT FOR ELECTRONIC CONTROL BOX $32.00

90382 DAWN FX TOOLS COMPLETE ELECTRONIC HARNESS: Includes 90382-1-3,8, & 9 $485.00

90382-1 DATA CABLE (SOLENOID), DAWN FX CONTROL HARNESS GEN 2 $53.00

90382-2 CABLE (CONNECTS PRESSURE TRANSDUCER TO TEE), DAWN FX CONTROL HARNESS GEN 2 $53.50

90382-3 TEE FITTING FOR DATA CABLE, DAWN FX CONTROL HARNESS GEN 2 $57.50

90382-4 DATA CABLE (TRACTOR CAB), DAWN FX CONTROL HARNESS GEN 2, 7FT: Makes useful extension for articulated tractors.

$99.00

90382-5 DATA CABLE (ARMORED), DAWN FX CONTROL HARNESS GEN 2, 15FT PVC $228.00

ITEM # CLOSING WHEELS List Price

300491-MOD KIT, SUPERCAP, M-SERIES: Replacement Supercap for M-series closing wheels. Kit includes: 1 (102544C-MOD) grease cap, 1 (9806) grease zerk, 1 (90458) snap ring, 1 (90426) o-ring. $10.00

400055-MSERIESKIT, SUPERCAP, XR SERIES: Replacement Supercap for Curvetine XR Closing Wheels. Kit includes: 1 (102544C) Curvetine M-Series Supercap, 2 (90426) o-ring, 1 (90427) Snap Ring, 1 (102416) dust cap, 1 (9806) grease zerk $17.50

400055KIT, SUPERCAP, XR SERIES: Replacement Supercap for Curvetine XR Closing Wheels. Kit includes: 1 (101315R2) Curvetine Supercap, 2 (9662R1) o-ring 1 3/4 ID x 1 7/8 OD, 2 (9880) BHSS 1/4-20 x 1/2, 2 (90010) LW 1/4 SS, 1 (9806) grease zerk, 1 (9785) pipe plug.

$14.50

90431 Replacement installation wrench $6.00

KITS & PARTS





90574 CABLE, MIFX CONTROL SYSTEM, TRACTOR BATTERY TO MIFX FRONT HUB $157.50

90581 CABLE, MIFX CONTROL SYSTEM HARNESS, ISOBUS SPLITTER HARNESS $235.00

90584 CABLE, MIFX CONTROL SYSTEM, DRAFT TUBE POWER/CAN CABLE, 25 FT. LENGTH , WITH FLYING LEADS $260.00

90587 CABLE, MIFX CONTROL SYSTEM, REAR BULKHEAD TO REAR HUB, 25 FT. LENGTH $ $260.00

90589 TEE, MIFX ROW-TO-ROW, 25AMP FUSED POWER/CAN TEE FOR DAISY CHAINED MIFX CONTROLLER $50.00

90590 CABLE, MIFX CONTROL SYSTEM, MIFX FRONT HUB TO FRONT BULKHEAD 10 FT. LENGTH $130.00

90615 CABLE, MIFX CONTROL SYSTEM, RFX+ ROW CONTROLLER HARNESS $157.00

90625 TERMINATING RESISTOR, MIFX CONTROL SYSTEM, ATP-4S FOR 90589 25 AMP TEE $8.00

90647 CONNECTOR, CIRCULAR FIELD WIRABLE CONNECTOR FOR FLYING LEADS ON 90584 98.00

90762 HUB, REAR, MAIN TEE FOR SPLITTING POWER/CAN TO THE RIGHT AND LEFT HAND SIDE OF THE TOOLBAR $140.00

90770 HUB, FRONT, MAIN TEE FOR COMBINING POWER AND CAN INTO ONE CABLE AT THE TRACTOR. $370.00

90771 CABLE, MIFX CONTROL SYSTEM, FRONT HUB TO IN-CAB SWITCH/COMPUTER INTERFACE. $98.00

90792 CABLE, MIFX CONTROL SYSTEM, SWITCH/ COMPUTER INTERFACE TO COMPUTER $62.00

300374 ELECTRONIC CONTROL BOX WITH DIAL & DIGITAL READOUT $870.00

300380 MOUNT, GFX for WHITE 8000 $59.50

300423 MOUNT, GFX UNIVERSAL NARROW $59.50

300424 MOUNT, GFX UNIVERSAL WIDE $59.50

300475 MOUNT, GFX UNIVERSAL KINZE $59.50

300488 MOUNT, GFX TOOLBAR WING PLATE. $70.00

300509 MOUNT, GFX for KINZE 4900 $59.50

300519 MOUNT, GFX for HORSCH $115.50

300535 MOUNT, GFX for WHITE 9000 $59.50

300660 CABLE, REFLEX, ROW-TO-ROW, 72 IN. LENGTH FOR 20-30 IN SPACING, ATP/DTP 4-PIN $25.00

300579 CABLE, REFLEX, ROW-TO-ROW, 82 IN. LENGTH FOR 36-40 IN SPACING, ATP/DTP 4-PIN $25.00

300586 CABLE, REFLEX, ROW-TO-ROW, 180 IN. TO RUN AROUND WING PIVOT, ATP/DTP 4-PIN $45.00

91092 HOSE, HYDRAULIC, REFLEX, -8 ORFS (F) / -8 ORFS (F) 20 IN. $25.00






KITS & PARTS




90126 ADAPTER, BLEED VALVE, FOR DAWN FX TOOLS $25.00

90687 TEE, -8 ORB (F)/ -8 ORB (F)/ -8 ORB (F)/ $40.00

90619 ADAPTER, -8 ORB (M) TO -4 ORFS (M) $5.00

90618 ADAPTER, -8 ORB (M) TO -6 JIC (M) $5.00

400252-1230 HOSE KIT, QTY. (12) GFX/ CFX HOSES, -4 ORFS (F) / -4 ORFS (F), FOR 12ROW , 30 IN. PLANTERS $252.00









400264-1230 KIT, REFLEX 12 R 30 IN. ELECTRIC CABLES AND HYDRAULIC HOSES FOR JD 1700 SERIES Max, Pro & EE $1090.00












400261 HARNESS, REFLEX BASIC, STRAIN GAUGE HARNESS - GREY 14 POSITION CONNECTOR $48.00

400262 HARNESS, REFLEX BASIC, VALVE AND SENSOR HARNESS - BLACK 14 POSITION CONNECTOR $102.00

400265 KIT, REFLEX PDM, CENTRAL HYDRAULIC MANIFOLD, SYSTEM HOSES AND CABLES $2995.00

400270 HARNESS, REFLEX, GFX INTEGRATION - GREY 14 POSITION CONNECTOR $102.00

91022 PLUG, REFLEX MANIFOLD, BLACK 8 POSITION CONNECTOR $9.50

91023 PLUG, REFLEX MANIFOLD, BLACK 14 POSITION CONNECTOR $9.50

91024 PLUG, REFLEX MANIFOLD, GREY 14 POSITION CONNECTOR $9.50

KITS & PARTS




ITEM # FERTILIZER APPLICATORS & STRIP TILL List Price

9901 COULTER, FLAT 18”, PRIMARY COULTER FOR 3000 SERIES FERTILIZER APPLICATOR $54.00

9946 COULTER, 13-WAVE 18”, PRIMARY TILLAGE COULTER FOR PLURIBUS $47.50

90011 BUSHING, 30mm ID x 34mm OD x 20mm LG $7.50

90204 COULTER, FLAT 20”, PRIMARY COULTER FOR 6000 SERIES FERTILIZER APPLICATOR $78.00

90423 COULTER, RIPPLE 18”, OPTIONAL COULTER FOR PLURIBUS $47.50

102100 BUSHING, PLURIBUS AIR BAG CRADLE $4.00

300408KIT, REPLACEMENT 13-WAVE 18” COULTER & HUB FOR PLURIBUS: This kit will entirely replace one missing 8-Wave coulter and hub. Kit includes: 1 (400106) 1.25” shaft hub, 2 (100055) 1/4” triangular spacer, 1 (9946) 13-Wave 18” dia. coulter, & all necessary hardware

$191.00

300417LH300417RH SWIRL, ASSEMBLY, UHMW (plastic), LH, RH (for Pluribus Strip-till Unit) $8.50

300417LH-ST300417RH-ST SWIRL, ASSEMBLY, STEEL, LH, RH (for Pluribus Strip-till Unit) $8.50

300438R300438L ROCKER ARM LH OR RH (for 6000 Unit) $98.00

400056KIT, REPLACEMENT 8-WAVE 16” COULTER & HUB: This kit will entirely replace one missing 8-Wave coulter and hub. Kit includes: 1 (400014) 1" shaft hub, 1 (9169) coulter hardware kit, 2 (00055) 1/4” triangular spacer, 1 (9063) 8-Wave 16" dia. coulter, 1 (9806) grease zerk.

$169.00

400056-3/4KIT, REPLACEMENT 8-WAVE 16” COULTER & HUB FOR PLURIBUS: This kit will entirely replace one missing 8-Wave coulter and hub. Kit includes: 1 (400106) 1.25” shaft hub, 2 (100055) 1/4” triangular spacer, 1 (9063) 8-Wave 16” dia. coulter, & all necessary hardware.

$191.00

400057KIT, REPLACEMENT 13-WAVE 16” COULTER & HUB: This kit will entirely replace one missing 13-Wave coulter and hub. Kit includes: 1 (400014) hub, 1 (9169) coulter hardware kit, 2 (100055) 1/4” triangular spacer, 1 (9064) 13-Wave 16" dia. coulter, 1 (9806) grease zerk.

$169.00

400058KIT, REPLACEMENT 25-WAVE 16” COULTER & HUB: This kit will entirely replace one missing 25-Wave coulter and hub. Kit includes: 1 (400014) hub, 1 (9169) coulter hardware kit, 2 (100055) 1/4” triangular spacer, 1 (9089) 25-Wave coulter, 1 (9806) grease zerk.

$169.00

400059KIT, REPLACEMENT RIPPLE 16” COULTER & HUB: This kit will entirely replace one missing ripple coulter and hub. Kit includes: 1 (400014) hub, 1 (9169) coulter hardware kit, 2 (100055) 1/4” triangular spacer, 1 (9065) ripple 16" dia. coulter, 1 (9806) grease zerk.

$169.00

400106 KIT, COMPLETE HUB, 1.25” SHAFT FOR PLURIBUS: This is the heavy duty hub used for the Pluribus coulters. Includes bearings, shaft, Supercap and hardware. $136.00

400123KIT, AIR REGULATOR: Auxiliary pneumatic components for air pressure on Pluribus Strip-Till, 6000 Universal Fertilizer Applicator and FreeFARM. Includes hoses, pressure regulator, adapters and hose clamps. Two air regulators are required for the 6000 unit.

$165.00

400131LH KIT, LH REPLACEMENT 15” TRASHWHEEL ASSEMBLY, INTEGRATED WHEEL & HUB: This kit will entirely replace one missing 15” Trashwheel® for Pluribus. $195.00

400131RH KIT, RH REPLACEMENT 15” TRASHWHEEL ASSEMBLY, INTEGRATED WHEEL & HUB: This kit will entirely replace one missing 15” Trashwheel® for Pluribus. $195.00

400137 KIT, 6000 NH3 TINE, RH & LH, R2, INCLUDING HOSES $224.00

400145R/L KIT, RH & LH, SUB ASSEMBLY FOR PUSHED 15" TRASHWHEEL CONFIGURATION FOR MODEL 6000 $839.00

400158R/L KNIFE ASSEMBLY: FOR MODEL6000 QUICK CHANGE, RH & LH . INCLUDES KNIFE, STAINLESS STEEL INJECTION COUPLER. $208.00

400168R-R1400168L-R1

KIT, FLOATING TRASHWHEELS FOR PLURIBUS: The floating Trashwheels assembly bolts to existing holes in the nose of the Pluribus Strip-Till Unit. Controlled with the pneumatic control kit

$395.00

KITS & PARTS



Model # MISC. List Price

9003 FW 1/2 X 1.06 HD $0.28

9007R1 NUT, 1/2-13 UNC FLG LOCK $0.29

9015 CUP / RACE TIMKEN® TAPERED ROLLER BEARING - PAIR WITH 9016 (cross with L44610) $3.75

9016 CONE / RUN TIMKEN® TAPERED ROLLER BEARING - 1” SHAFT (cross with L44643) $8.50

9017 SEAL, TRIPLE LIP, 1.5 DIA SHAFT (cross with AA26234) $6.50

9018 SEAL, RING, PHENOLIC (cross with B-32687) $2.75

9019 PIN, COTTER, HAMMERLOCK (for all hubs) $0.50

9032 FW 5/8 SAE HARD $0.55

9046 HHCS, 1/2-13 X 1.25 GR5 ZN $0.55

9063 BLADE, COULTER, 8-WAVE, 16” DIA X .85”, WIDE HEAVY DUTY, .177” THK $44.50


9065 BLADE, COULTER, RIPPLE, 16” DIA X .25”, WIDE HEAVY DUTY, .177” THK $44.50


9077 HHCS, 1/2-13 X 2-1/4 $0.90

9078 HHCS 5/8-11 UNC X 2 GR8 ZN $1.15

9141 FW 5/8 X 1.75 X .13 HARDENED ZN $0.90

9142 NUT, 5/8-11 GR5 ZN ALL-METAL LOCK $0.70

9454 NUT, 1/2-13 GRD 5 ZN $0.20

9539 CUP / RACE TIMKEN® TAPERED ROLLER BEARING - 1.25” SHAFT (included with kit 400106 and LM-67048) $3.50

9662 O-RING, 1-7/8 ID X 2 OD X 1/32 DIA $0.50

9785 PLUG, PIPE 1/8 NPT $1.10

9880 1/4-20 X 1/2 BUTTON RECESSED HEX SOCKET HEAD STAINLESS STEEL SCREW $0.50

9806 ZERK, GREASE 1/8 NPT $0.75

9902-2 BUSHING FLANGE 3/4 BORE X 1 OD X 1 OVERALL LONG (3000 wiper arm bushing) $6.50

9902-3 BUSHING FLANGE 7/8 X 1 X .625 LG (3000 push rod bushing) $6.50

9910 CONE / RUN TIMKEN® TAPERED ROLLER BEARING - 1.25” SHAFT (included with kit 400106 and LM-67048) $9.50

9988R02 WHEEL ASSY 2.5 X 13 WIPER TYPE W/BEARING (for 3000 series fertilizer/coulter) $52.00

90010 SPLIT LOCK WASHER 1/4” STAINLESS STEEL $0.25

90011 BUSHING, SLEEVE, 30 MM BORE X 34 MM OD X 20 MM LG $7.50

90081 NUT 3/8-16 GRD 5 ZN $0.85

90084 BUSHING, GFX CYLINDER PIVOT BUSHING $6.50

KITS & PARTS




Model # MISC. List Price

90089 SPHERICAL BEARING, GFX CYLINDER ROD END 5/8-18 MALE THREAD $18.50

90090 JAM NUT, 5/11-18 GRD 5 ZN, FOR 90089 SPHERICAL BEARING $0.50

90100-R2 BUSHING, GFX MAIN ARM PIVOT, FILAMENT WOUND, 1.125 ID $13.25

90148 THRUST WASHER FOR GFX CYLINDER PIVOT $3.50

90233 SOLID, GROOVED PIN, 1/4 X 2, ZN $1.00

90376 HHCS, 3/8-16 X 4.5, GRD 8 ZN YELLOW $1.50

100055 SPACER, TRIANGLE, 1/4” THICK FOR 16" COULTER $4.50

100061 SCREW DEPTH ADJUST, 7/8-6 ACME 10” $28.00

100066 TRASHWHEELS®/COULTERS/CURVETINE XR HUB SHAFT FOR TAPERED BEARINGS (400014R01) $19.50

100183-R1 BUSHING, 9/16 LONG, HARDENED, ZN $3.50

100882 STRIPPER, FORMED TRIANGULAR STRIPPER FOR TRASHWHEELS® $6.50

100949 SUPERCAP, TRIANGULAR DAWN GREASE-CAP FOR TRASHWHEELS® AND COULTERS (400014R01) $9.75

101315-R2 SUPERCAP, DAWN GREASE-CAP FOR CURVETINES (1201, 1301, 1302) $9.75

101359 TORSION SPRING FOR 3004 FERT/COULT GAUGE WHEEL, LH $8.00

101360 TORSION SPRING FOR 3004 FERT/COULT GAUGE WHEEL, RH $8.00

101550 DROP FORGED DAWN TRASHWHEEL, 12.75” $73.00

101952 SHAFT, 1.25” HUB SHAFT FOR 7000 SERIES AND 6000 SERIES TOOLS (for hub kit 400106) $17.00

102170 SCREW DEPTH ADJUST, 7/8-6 ACME 9" CASE $24.50

102064-R2 BUSHING, GFX SHOULDER PIVOT $14.50

102069 SPACER, USE WITH GFX SPHERICAL BEARING $3.50

102071 THRUST WASHER, GFX ARM PIVOT $3.50

102336 THRUST WASHER (for 6000 Unit) $2.00

102593 (RH)102594 (LH) STRIPPER, BAYONET STRIPPER FOR TRASHWHEELS® $11.00

103034 SUPERCAP, GREASE-CAP FOR TRASHWHEELS® AND COULTERS, NEW CAP WITH PROTECTED GREASE ZERK $9.75

200015 DROP FORGED DAWN TRASHWHEEL®, 14” $73.00

200077 TRASHWHEEL®-STEM - ADJUSTABLE- 6 HOLE FOR 14” TRASHWHEELS® $95.00

200291 TRASHWHEEL®-STEM - ADJUSTABLE- 4 HOLE FOR 12.75” TRASHWHEELS® $95.00

200510 WELDMENT, T SHAPED STEM DEPTH ADJUST 4010 $73.50

200515-R1 WELDMENT, 4010 ARM $79.00

KITS & PARTS



ITEM # TOOLBARS List Price

1915-MTB DAWN TOOLBAR MARKER FOR 15 ft. TOOLBAR $3700.00

1920-MTB DAWN TOOLBAR MARKER FOR 15 ft. TOOLBAR $4250.00

7815-6 TOOLBAR, 15 FOOT, 3-POINT RIGID : Dawn basic 3-Point mounted rigid 7in. x 7in. toolbar with 3/8" wall. Sold with adjustable gauge wheels. $4350.00

7820-8 TOOLBAR, 20 FOOT, 3-POINT RIGID : Dawn basic 3-Point mounted rigid 7in. x 7in. toolbar with 3/8" wall. Sold with adjustable gauge wheels. $5025.00

200536RH KIT, RH TOOLBAR GAUGE WHEEL ASSEMBLY: Mounting for the 300164 or similar gauge wheel on a 20" toolbar. $375.00

200536RH KIT, LH TOOLBAR GAUGE WHEEL ASSEMBLY: Mounting for the 300164 or similar gauge wheel on a 20" toolbar. $375.00

300164 KIT, TOOLBAR GAUGE WHEEL: Kit includes Wheel with 6.70-15 4 Ply 3 Tire. $250.00

300289 KIT, DRAWBAR HITCH FOR PULL BEHIND CART $750.00

400134-MKR KIT, LIGHT KIT FOR DAWN TOOLBAR: For toolbars equipped with markers. Kit includes mounts, lights, cord and hardware $100.00

400134-NMKR KIT, LIGHT KIT FOR DAWN TOOLBAR: For toolbars not equipped with markers. Kit includes mounts, lights, cord and hardware $50.00

KITS & PARTS

ITEM # COMPLETE PLURIBUS STRIP-TILL SYSTEMS List Price

PL-30-VF DAWN PL-30 VERTICAL-FOLD TOOLBAR : Dawn Pluribus Strip-Till Toolbar. 12 Rows on 30 in. centers. Pluribus Units installed on a 30' vertical-fold toolbar, with granular and liquid fertilizer configuration options.

Request Quote

PL-30 DAWN PL-30 FRONT-FOLD TOOLBAR : Dawn Pluribus Strip-Till Toolbar. 12 Rows on 30 in. centers. Pluribus Units installed on a 30' front-fold toolbar, with granular and liquid fertilizer configuration options.

Request Quote

PL-40-VF DAWN PL-40 VERTICAL-FOLD TOOLBAR : Dawn Pluribus Strip-Till Toolbar. 16 Rows on 30 in. centers. Pluribus Units installed on a 40' vertical-fold toolbar, with granular and liquid fertilizer configuration options.

Request Quote

PL-40 DAWN PL-40 FRONT-FOLD TOOLBAR : Dawn Pluribus Strip-Till Toolbar. 16 Rows on 30 in. centers. Pluribus Units installed on a 40' front-fold toolbar, with granular and liquid fertilizer configuration options.

Request Quote

PL-60 DAWN PL-60 FRONT-FOLD TOOLBAR : Dawn Pluribus Strip-Till Toolbar. 24 Rows on 30 in. centers. Pluribus Units installed on a 60' vertical-fold toolbar, with granular and liquid fertilizer configuration options.

Request Quote

Dawn PL-Toolbars may be ordered as a complete system with or without granular and liquid fertilizer tanks/hoppers. There are configurations available for both integral tanks/hoppers and tow behind commodity carts.

Dawn Pricelist September · PDF file2017 Dawn Equipment Co. Inc. 370 N. Cross, PO Box 497...

Documents

Transcript of Dawn Pricelist September · PDF file2017 Dawn Equipment Co. Inc. 370 N. Cross, PO Box 497...