Datasheet - ravirajtech.com · OPP01 9Pin Connection (JP2) Name No States Description GND 1 POWER...

____________________________________________________________ Page: 1 FIM01 Datasheet

FIM01

®

Stand-Alone Fingerprint Recognition Device with Built-in CPU

Datasheet


FIM01

© Copyright 2004 RaviRaj Technologies


FIM01

Revision History

Date of Revision Version Description

February 11, 2004 1.0 Release


FIM01

General Descriptions

⎝

Basic Feature (FIM01 series)

Dimension 43 x 60 [mm] 43 x 60 [mm] Sensor NITGEN OPP01MM2 NITGEN OPP02MM1

SupplyVoltage 5 [V DC] 200 [mV] 3.3 [V DC] 100 [mV] Current Consumption 60(Idle) ~ 210(Op.) [mA] 60(Idle) ~ 200 (Op.) [mA]

Operating Temperature -20 ~ 60 -20 ~ 60 Humidity 5 ~ 95 [%] 5 ~ 95 [%]

ESD Tolerance 10 [KV] (indirect) 10 [KV] (indirect) Communication Speed 9600 ~ 115200 [bps] 9600 ~ 115200 [bps]

Capture Speed 0.4(normal) / 0.7(secure) [sec] 0.4(normal) / 0.7(secure) [sec]

Verification Speed 1.2 [sec] (Capture + Extract + Match)

1.2 [sec] (Capture + Extract + Match)

Boot Up Time 0.34 [sec in 100 users] 0.34 [sec in 100 users] The number of

MAX fingers (2 images per 1 finger)

100 100

Application Door-Lock System Safe Box Simple Access Controller Vehicle Control


FIM01

* OPP01MM2 and OPP02MM1 are sensor module ordering name provided by RaviRaj Technologies


FIM10

Ordering Information Part No Power Board Power Board Size FIM10-HV with OPP01MM2 5V 43x60mm FIM10-LV with OPP02MM1 3.3V

Specification NOTE


FIM01

Part 1(FIM01-HV)

FIM01-HV Specifications

Board Spec S3C2410 (ARM9), 8MB SDRAM, 1MB Flash Dimension 43 x 60mm Sensor NITGEN OPP01MM2 SupplyVoltage 5V DC ± 200mV Current Consumption 60m A(Idle) ~ 210mA(Operation) Operating Temperature -20 ~ 60 Humidity 5%~95% ESD Tolerance > ± 10KV Random Vibration Communication Speed 9600 ~ 115200bps External I/O 3 input port, 2 output port

Reserved user port(Option) Captured Image Size 356 x 292 Capture Speed 0.4(normal) / 0.7(secure) sec Verification Speed 1.2 sec (Capture + Extract + Match) Boot Up Time 0.34 sec Data Encryption Method AES in flash memory Special Function Fast identification, Cancel, Adaptive Capture

for dr y, wet, small finger * If you want to use Reserved user port for your specific purpose, plese contact RaviRaj Technologies.


FIM01

FIM01-HV Technical Data The Features of FIM10-HV board

Front Side


FIM01


FIM01

FIM01-HV External Port

JTAG Pin Pin Name Description 1 VCC 3.3 Volt Power 2 N/A N/A 3 nSRST JTAG control pin 4 TDO JTAG control pin 5 TDI JTAG control pin 6 nTRST JTAG control pin 7 TCK JTAG control pin 8 TMS JTAG control pin 9 GND Ground

* JP1 (JTAG connector) is used only for development or emergency recovery. So FIM01 having no JP1 co nnector is

delivered.

OPP01 9Pin Connection (JP2) Name No States Description GND 1 POWER Sensor Ground VCLK 2 IN Sensor Clock

SDATA0 3 OUT Sensor Data0 SDATA1 4 OUT Sensor Data1 SDATA2 5 OUT Sensor Data2 SDATA3 6 OUT Sensor Data3

SDA 7 IN Sensor SDA SCL 8 IN Sensor SCL VCC 9 POWER Sensor VCC (+5V)

Pin Pin Name Description 1 VCC 5V Power 2 EXT_RXD RS-232C port receiving signals from host 3 EXT_TXD RS-232C port transmitting signals to host 4 EXT_ PASS External output for indicating authentication success 5 EXT_ FAIL External output for indicating authentication fail


FIM01

6 EXT_ENROLL External Input to enroll fingerprint without RS-232 communication 7 EXT_DELETE External Input to delete user without RS-232 communication 8 EXT_IDENTIFY External Input to identify user without RS-232 communication 9 GND Ground

Pin Name Direction Initial State Active State 4 EXT_ PASS Out Low High (500 ms) 5 EXT_ FAIL Out Low High (500 ms) 6 EXT_ENROLL In High Low (more 30ms) 7 EXT_DELETE In High Low (more 30ms) 8 EXT_IDENTIFY In High Low (more 30ms)

Reserved Port for future use (JP4) Name No States Description VCC 1 POWER 5V Power

2 3 4 5 6 7 8

VCC 9 POWER Ground

* This connector is reserved for future use. If you want to use this port for your specific purpose, contact RaviRaj Technologies.


FIM01

MATERIAL LIST NO DESCRIPTION VENDOR

1 9-PIN HOUSING 1.25mm(51021-0900) MOLEX 2 9-PIN HOUSING 1.25mm(51021-0900) MOLEX 3 CABLE 11P, 180mm UL

9-PIN CONNECTOR PIN COLOR SIGNAL

1 BLACK GND 2 BLUE CLK 3 YELLOW DATA0 4 GREEN DATA1 5 PURPLE DATA2 6 REDDISH BROWN DATA3 7 SKYBLUE SDA 8 ORANGE SCL 9 RED

VCC * All pins must be connected according to signal name and line color.

_______________________________________________________ Page: 14 FIM01 Standalone with built-in CPU

FIM01

Part 2 (FIM01-LV)

FIM10-LV Specifications

Board Spec S3C2410 (ARM9), 8MB SDRAM, 1MB Flash Dimension 43 x 60mm Sensor OPP02MM1 SupplyVoltage 3.3V Current Consumption 60m A(Idle) ~ 200mA(Opera tion) Operating Temperature -20 ~ 60 Humidity 5%~95% ESD Tolerance > ± 10KV Random Vibration Communication Speed 9600 ~ 115200bps External I/O 3 input port, 2 output port

Reserved user port(Option) Captured Image Size 398 x 300 Capture Speed 0.4(normal) / 0.7(secure) sec Verification Speed 1.2 sec (Capture + Extract + Match) Boot Up Time 0.34 sec Data Encryption Method AES in flash memory Special Function Fast identification, Cancel, Adaptive Capture

for dry, wet, small finger * If you want to use Reserved user port for your specific purpose ,contact RaviRaj Technologies.


FIM01

FIM01-LV Technical Data The Features of FIM10-LV board

Front Side


FIM01


FIM10

FIM01-LV External Port

JTAG Pin Pin Name Description 1 VCC 3.3V Power 2 N/A N/A 3 NSRST JTAG control pin 4 TDO JTAG control pin 5 TDI JTAG control pin 6 NTRST JTAG control pin 7 TCK JTAG control pin 8 TMS JTAG control pin 9 GND Ground

* JP1 (JTAG connector) is used only for development or emergency recovery. So FIM01 having no JP1 connector is

delivered.

OPP02 Connector – J2(9pins) Name No States Description

GND 1 POWER Sensor Ground CLK 2 IN Sensor Clock

SDATA0 3 OUT Sensor Data0 SDATA1 4 OUT Sensor Data1 SDATA2 5 OUT Sensor Data2 SDATA3 6 OUT Sensor Data3

DA 7 IN Sensor DA CL 8 IN Sensor CL

VCC 9 POWER Sensor VCC (+3.3V)

Pin Pin Name Description 1 VCC 3.3 Volt Power 2 EXT_RXD RS-232C port receiving signals from host 3 EXT_TXD RS-232C port transmitting signals to host 4 EXT_ PASS External output for indicating authentication success 5 EXT_ FAIL External output for indicating authentication fail


FIM10

6 EXT_ENROLL External Input to enroll fingerprint without RS-232 communication 7 EXT_DELETE External Input to delete user without RS-232 communication 8 EXT_IDENTIFY External Input to identify user without RS-232 communication 9 GND Ground

Pin Name Direction Initial State Active State 4 EXT_ PASS Out Low High (500 ms) 5 EXT_ FAIL Out Low High (500 ms) 6 EXT_ENROLL In High Low (more 30ms) 7 EXT_DELETE In High Low (more 30ms) 8 EXT_IDENTIFY In High Low (more 30ms)

Reserved Port for future use (JP4) Name No States Description VCC 1 POWER 3.3V Power

2 3 4 5 6 7 8

VCC 9 POWER Ground * This connector is reserved for future use. If you want to use this port for your specific purpose,

contact RaviRaj Technologies.


FIM01

Cables The cable of FIM01-LV is identical with the cable of FIM01-HV


FIM01

R7


FIM01

Registered user Boot up time (tpi) 0 276 m sec

20 290 m sec 50 308 m sec

100 334 m sec


FIM01

Support Information

RaviRaj Technologies 319 Narayan peth, Pune 411030, Maharashtar, India. Fax:(91)-020-24475992 Web site: http://www.ravirajtech.com [email protected]

Datasheet - ravirajtech.com · OPP01 9Pin Connection (JP2) Name No States Description GND 1 POWER...

Documents

Transcript of Datasheet - ravirajtech.com · OPP01 9Pin Connection (JP2) Name No States Description GND 1 POWER...