Data Transcript Example for Msc Server R13.2

8/16/2019 Data Transcript Example for Msc Server R13.2

1/781

!04000,01! !****************************************************! !* *! !* DATA TRANSCRIPT EXAMPLE MSC Server *! !* GSM/WCDMA ANSI *! !* H/W AXE810 APG40C & APZ 212 40/2 *! !* *!

!* TRAFFIC DT FOR MSC Server *! !* DOC-NO 53/192 02-FDG 103 21/4 *! !* *! !* Generic HW DT commands are use as reference *! !****************************************************! !* *! !* AS NAME : GSM MSC R13.2, WCDMA R6 *! !* AS IDENTITY : 2/AXE 106 30/A46 R1A *! !* *! !****************************************************! !* *! !* PREPARED BY: *!

!* EUS/WR/EA Evodio Vazquez Rev A 08/31/2008 *! !* *! !************** NOTATIONS ***************************! !* !N13! New command line related to new or *! !* changed function from R12 to R13 *! !* !C13! Changed command line from R12 to R13 *! !* !D13! The command or parameter is not valid *! !* for R13 *! !* !N12! New command line related to new or *! !* changed function from R11 to R12 *! !* !C12! Changed command line from R11 to R12 *! !* !D12! The command or parameter is not valid *! !* for R12 *!

!* *! !* !R11! New command line related to new or *! !* changed function from R10 to R11 *! !* !C11! Changed command line from R10 to R11 *! !* !D11! The command or parameter is not valid *! !* for R11 *! !* *! !****************************************************!

!**************************************************************! !* General Notes to DT Engineers: *! !* This file is intended to be used as a reference ONLY. *!

!* The following inputs are required for a new MSC Server node*! !* CIQ Customer Inputs Questionnaire 50/00021-FDG 103 21/4 *! !* Other inputs are: *! !* Core Network Design package *! !* Reference to switch's printout, existing node in a network *! !* Specific DT standards per operator (example: AT&T,Tmobile) *! !**************************************************************!

!+-----------------------------------------------------------------------+! !+ SIZE ALTERATION EVENTS (APZ) +! !+-----------------------------------------------------------------------+!

!+-----------------------------------------------------------------------+! !+ Note: SAEs commented out means the NI value is already set higher +! !+ in the R11 MSC reference dump. +!


2/781

!+ (NEW) means the SAE did not exist in the import data. +! !+-----------------------------------------------------------------------+! SAAII:SAE=301, NI=20000;

!---------------------------------------------------------------! ! Seizure queue for IO devices EXT.min:1 IOH ALA ! ! & alarm list. Approximate value max:- !

! is 420+8 for every 1000 sub- RED.min:1 ! ! scribers, estimated for an ex- max:- ! ! change of ordinary size, in ! ! operation. The higher value ! ! (ex. 2000-6000) is necessary for ! ! the exchange at the operation ! ! start. ! !---------------------------------------------------------------!

SAAII:SAE=302, NI=120; ! # IO DEVICES= AT + TW + (DC * 8) ! !SAAII:SAE=303, NI=40; !! IO DEVICE FILES ! SAAII:SAE=807,BLOCK=RPDI, NI=1708; ! No of ind in RP error rec. to be !

! done before SAE=304 ! ! NI=SAE304*4+100 ! SAAII:SAE=304, NI=402; ! NI= Highest RP + 1 initial !

!---------------------------------------------------------------! ! Here the RP with the highest EXT.min:1 DEPO MRP ! ! number + 1 (in the RP alloca- max:- RPADM RPADS ! ! tion) is indicated. RED.min:1 RPAL RPDI ! ! max:- RPFD RPREC ! ! NI= Highest RP + 1 RPREP RPRES ! ! FCERT ! !---------------------------------------------------------------!

SAAII:SAE=330, NI=100; ! NO OF USER IDENTITIES ! !SAAII:SAE=332, NI=5000; !

!------------------------------------------------------------! ! Number of EMRP variables/EMRP. EXT.min:1 LAEL ! ! Recomended initial value: max:- ! ! NI=3000 for APZ 210 RED.min:1 ! ! NI=5000 for APZ 211 & 212 max:- ! !------------------------------------------------------------!

!SAAII:SAE=333, NI=0; !!(NEW) This SAE is not applicable ! ! for APZ 212 40 !

!------------------------------------------------------------! ! Number of transport individuals. DCLTRAN ! ! Recommended value: 128 * number of SPGs + 250 ! ! ! !------------------------------------------------------------!

!SAAII:SAE=334, NI=0; !!(NEW) This SAE is not applicable ! ! for APZ 212 40 ! SAAII:SAE=340, NI=1024;

!------------------------------------------------------------! ! The number of highest function code + 1 is LARI !

! indicated. ! ! Recomended value:1023 ! ! !


3/781

!------------------------------------------------------------!

!SAAII:SAE=341, NI=128; !! FILE USERS IN EXT IOS ! SAAII:SAE=343, NI=1023;

!------------------------------------------------------------! ! Number of regional software units that can LAEC LAEL !

! be stored in CP-PS. ! ! Recommended value: NI=255 ! ! ! !------------------------------------------------------------!

!SAAII:SAE=344, NI=0; !!(NEW) This SAE is not applicable ! ! for APZ 212 40 !

!------------------------------------------------------------! ! Session individuals for trans- EXT.min:1 ASCP ! ! port channels towards subsystem max:- ! ! DCS for the ALPHA-terminal RED.min:1 !

! function. Least extension max:- ! ! step=1. ! !------------------------------------------------------------!

!SAAII:SAE=345, NI=500; !

!------------------------------------------------------------! ! Size alteration of storage EXT.min:1 LAD ! ! bank. Buffer size 32 W. max:- ! ! RED.min:1 ! ! max:- ! !------------------------------------------------------------!



SAAII:SAE=347, NI=1050;



!------------------------------------------------------------! ! Size alteration of storage EXT.min:1 LAD ! ! bank. Buffer size 256 W. max:- ! ! RED.min:1 ! ! max:- !

!------------------------------------------------------------!



4/781




SAAII:SAE=351, NI=356; ! needed for S7BPC !



!------------------------------------------------------------! ! Size alteration of storage EXT.min:1 LAD ! ! bank. Buffer size 4096 W. max:- ! ! RED.min:1 !

! max:- ! !------------------------------------------------------------!


!------------------------------------------------------------! ! Size alteration of storage EXT.min:1 LAD ! ! bank. Buffer size 8 kW. max:- ! ! RED.min:1 ! ! max:- ! !------------------------------------------------------------!


!------------------------------------------------------------! ! Size alteration of storage EXT.min:1 LAD ! ! bank. Buffer size 16 kW. max:- ! ! RED.min:1 ! ! max:- ! !------------------------------------------------------------!


!------------------------------------------------------------! ! Size alteration of storage EXT.min:1 LAD !

! bank. Buffer size 32 kW. max:- ! ! RED.min:1 ! ! max:- !


5/781

!------------------------------------------------------------!

!SAAII:SAE=356, NI=50; !! TABLE AREA FOR TRANSLATE ! !SAAII:SAE=357, NI=50; !! TABLE AREA FOR TRANSPORT ! !SAAII:SAE=369, NI=50; !! DATA DICTIONARY TABLES ! SAAII:SAE=418, NI=100; ! PXZS ! SAAII:SAE=420, NI=100; ! PXZD !

SAAII:SAE=421, NI=120; ! # of IO devices. SAME AS SAE302 ! SAAII:SAE=466, NI=2000;

!------------------------------------------------------------! ! The possible maximum number EXT: min: 100 ! ! of alarms existing in the max: 2048 ALA ! ! alarm list in AXE. RED: min: - ! ! max: - ! !------------------------------------------------------------!

!SAAII:SAE=800,BLOCK=LAEL, NI=5000; !! NI SAME AS SAE332 ! SAAII:SAE=800,BLOCK=AF, NI=32; ! Number of AF used by STS. !

!SAAII:SAE=800,BLOCK=AT, NI=0; !!(NEW) AT DEVICES This SAE is not ! ! applicable for APZ 212 40 ! !SAAII:SAE=800,BLOCK=APFPI, NI=256; !! # of individuals in buffer for CP ! ! to File Processing funtions in AP ! ! communication. ! !SAAII:SAE=800,BLOCK=APFMI, NI=64; !! # of simultaneous file ! ! individuals in AP. ! !SAAII:SAE=801,BLOCK=EXAL2, NI=0; !!(NEW) Number of external alarm ! ! receivers. This SAE is not ! ! applicable for APZ 212 40 ! SAAII:SAE=803,BLOCK=ALSA, NI=96; ! EXTERNAL ALARM CATCHWORDS (# ! ! ALARMS 'CAW1' SLOGANS) SET TO ! ! SAME AS SAE 804, ALSA !

SAAII:SAE=804,BLOCK=ALSA, NI=96; ! EXTERNAL & TRANSITING ALARMS ! ! (SAE=801,BL=EXALO)+(SAE 801, ! ! BL=EXAL2)MINIMUM VALUE OF 64 ! SAAII:SAE=805,BLOCK=FIE, NI=64; ! Number of file users. ! !SAAII:SAE=806,BLOCK=ALIM, NI=0; !!(NEW) # OF ALI'S This SAE is not ! ! applicable for APZ 212 40 ! SAAII:SAE=812,BLOCK=MFM, NI=50; ! Number of forlopp groups. One ! ! forlopp group contains data for ! ! 1024 forlopps. ! SAAII:SAE=813,BLOCK=MFM, NI=50; ! STEP'S OF 50 ! SAAII:SAE=813,BLOCK=MFM, NI=100; SAAII:SAE=813,BLOCK=MFM, NI=150; SAAII:SAE=813,BLOCK=MFM, NI=200; SAAII:SAE=813,BLOCK=MFM, NI=250; SAAII:SAE=813,BLOCK=MFM, NI=300; SAAII:SAE=813,BLOCK=MFM, NI=350; SAAII:SAE=813,BLOCK=MFM, NI=400; SAAII:SAE=813,BLOCK=MFM, NI=450; SAAII:SAE=813,BLOCK=MFM, NI=500; SAAII:SAE=813,BLOCK=MFM, NI=550; SAAII:SAE=813,BLOCK=MFM, NI=600; SAAII:SAE=813,BLOCK=MFM, NI=650; SAAII:SAE=813,BLOCK=MFM, NI=700; SAAII:SAE=813,BLOCK=MFM, NI=750; SAAII:SAE=813,BLOCK=MFM, NI=800;

SAAII:SAE=813,BLOCK=MFM, NI=850; SAAII:SAE=813,BLOCK=MFM, NI=900; SAAII:SAE=813,BLOCK=MFM, NI=950;


6/781


7/781

!+ RTS01 <-> ISOMAM +! !+ RTS02 <-> IUSAM +! !+ RTS03 <-> DASAM +! !+ RTS04..19 <-> not used +! !+-----------------------------------------------------------------------+!

!SAAII:SAE=500,BLOCK=RTS00, NI=512; !! Run Time System HLPlex/Object !

! Man. com. ! !SAAII:SAE=501,BLOCK=RTS00, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=502,BLOCK=RTS00, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=503,BLOCK=RTS00, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=504,BLOCK=RTS00, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=505,BLOCK=RTS00, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=506,BLOCK=RTS00, NI=512; !! Run Time System HLPlex/Object !

! Man. com. ! !SAAII:SAE=507,BLOCK=RTS00, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=500,BLOCK=RTS01, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=501,BLOCK=RTS01, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=502,BLOCK=RTS01, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=503,BLOCK=RTS01, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=504,BLOCK=RTS01, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. !

!SAAII:SAE=505,BLOCK=RTS01, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=506,BLOCK=RTS01, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=507,BLOCK=RTS01, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=500,BLOCK=RTS02, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=501,BLOCK=RTS02, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=502,BLOCK=RTS02, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=503,BLOCK=RTS02, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=504,BLOCK=RTS02, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=505,BLOCK=RTS02, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=506,BLOCK=RTS02, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=507,BLOCK=RTS02, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=500,BLOCK=RTS03, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=501,BLOCK=RTS03, NI=512; !! Run Time System HLPlex/Object !

! Man. com. ! !SAAII:SAE=502,BLOCK=RTS03, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. !


8/781

!SAAII:SAE=503,BLOCK=RTS03, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=504,BLOCK=RTS03, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=505,BLOCK=RTS03, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=506,BLOCK=RTS03, NI=512; !! Run Time System HLPlex/Object !






9/781







10/781







11/781







12/781



! Man. com. ! !SAAII:SAE=505,BLOCK=RTS19, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=506,BLOCK=RTS19, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=507,BLOCK=RTS19, NI=512; !! Run Time System HLPlex/Object ! ! Man. com. ! !SAAII:SAE=310, NI=64; ! !SAAII:SAE=358, NI=50; ! !SAAII:SAE=359, NI=100; ! !SAAII:SAE=360, NI=50; ! SAAII:SAE=361, NI=1050; SAAII:SAE=362, NI=100;

!SAAII:SAE=363, NI=53; ! !SAAII:SAE=364, NI=53; ! !SAAII:SAE=365, NI=100; ! !SAAII:SAE=366, NI=50; ! !SAAII:SAE=367, NI=53; ! !SAAII:SAE=368, NI=100; ! !SAAII:SAE=370, NI=53; ! !SAAII:SAE=371, NI=50; ! !SAAII:SAE=417, NI=32; ! !SAAII:SAE=419, NI=32; ! !SAAII:SAE=423, NI=3000; ! !SAAII:SAE=424, NI=512; ! !SAAII:SAE=462, NI=3000; ! SAAII:SAE=800,BLOCK=TW, NI=32; !SAAII:SAE=800,BLOCK=AD1, NI=0; !!(NEW) This SAE is not applicable ! ! for APZ 212 40 ! !SAAII:SAE=800,BLOCK=LOGB, NI=120; ! !SAAII:SAE=800,BLOCK=COCAT, NI=300; ! !SAAII:SAE=801,BLOCK=EXAL0, NI=32; ! !SAAII:SAE=805,BLOCK=DBTAB7, NI=100; ! !SAAII:SAE=806,BLOCK=DBTAB7, NI=50; ! !SAAII:SAE=809,BLOCK=LAVS, NI=16384;! !SAAII:SAE=810,BLOCK=LAVS, NI=1024; ! !SAAII:SAE=814,BLOCK=DBPOH, NI=10; ! !SAAII:SAE=814,BLOCK=DBCOH, NI=10; !

!SAAII:SAE=815,BLOCK=DBTRH, NI=256; ! !SAAII:SAE=816,BLOCK=DBTRH, NI=20000;! !SAAII:SAE=817,BLOCK=DBTRH, NI=20000;!


13/781

!+--------------+! !+ DB AXEPARS +! !+--------------+!

!SAAII:SAE=958, NI=256; !! NO OF AXE PARAMETER SETS IN ! ! DATABASE TABLE AXEPARSETS !

!SAAII:SAE=959, NI=256; !! NO OF ROWS IN WORK AREA FOR ! ! DATABASE TABLE AXEPARSETS !!C12!SAAII:SAE=960, NI=9900; ! NO OF AXE PARAMETERS IN DATABASE ! ! TABLE AXEPARS !!C12!SAAII:SAE=961, NI=9900; ! NO OF ROWS IN WORK AREA FOR ! ! DATABASE TABLE AXEPARS ! !SAAII:SAE=966, NI=20000;!! NO OF RELATIONS BETWEEN AXE ! ! PARAMETERS AND BLOCKS ! SAAII:SAE=967, NI=4096; ! NO OF ROWS IN WORK AREA FOR ! ! DATABASE TABLE AXEPARBLOCKRELS ! ! Guiding value =1024. ! !SAAII:SAE=1803, NI=128; !! NO OF RECORDS IN THE PS BUILD !

! LEVEL LOG FILE ! ! Guiding value = 128 !

!+-----------------+! !+ DB RPSRPTYPES +! !+-----------------+!

!SAAII:SAE=1806, NI=46; !! NO OF TABLE ROWS IN TABLE ! ! RPSRPTYPES ! !SAAII:SAE=1807, NI=10; !! NO OF WORK ROWS IN TABLE ! ! RPSRPTYPES ! ! Guiding value = 10. !

!+------------------+! !+ DB RPSHWSWCOMP +! !+------------------+!

!SAAII:SAE=1808, NI=256; !! NO OF TABLE ROWS IN TABLE ! ! RPSHWSWCOMP ! ! Guiding value = 30 ! !SAAII:SAE=1809, NI=10; !! NO OF WORK ROWS IN TABLE ! ! RPSHWSWCOMP ! ! Guiding value = 10. !

!+--------------------+! !+ DB RPSPROPERTIES +! !+--------------------+!

!SAAII:SAE=1810, NI=39; !! NO OF TABLE ROWS IN TABLE ! ! RPSRPPROPERTIES ! !SAAII:SAE=1811, NI=10; !! NO OF WORK ROWS IN TABLE ! ! RPSRPPROPERTIES ! ! Guiding value = 10. !

!+----------------------+! !+ DB RPSTYPESTPPROPS +! !+----------------------+!

!SAAII:SAE=1812, NI=46; !! NO OF TABLE ROWS IN TABLE ! ! RPSTYPESTOPROPS ! !SAAII:SAE=1813, NI=10; !! NO OF WORK ROWS IN TABLE !


14/781

! RPSTYPESTOPROPS ! ! Guiding value = 10. !

!+----------------+! !+ DB RPSBOARDS +! !+----------------+!

!SAAII:SAE=1814, NI=256; !! NO OF TABLE ROWS IN TABLE ! ! RPSBOARDS ! ! Guiding value = 256. ! !SAAII:SAE=1815, NI=256; !! NO OF WORK ROWS IN TABLE ! ! RPSBOARDS ! ! Guiding value = 256. !

!+--------------------+! !+ DB RPSBOARDLISTS +! !+--------------------+!

!SAAII:SAE=1816, NI=256; !! NO OF TABLE ROWS IN TABLE !

! RPSBOARDLISTS ! ! Guiding value = 256 ! !SAAII:SAE=1817, NI=16; !! NO OF WORK ROWS IN TABLE ! ! RPSBOARDLISTS ! ! Guiding value = 16. !

!+----------------------+! !+ DB RPSFAULTWEIGHTS +! !+----------------------+!

!SAAII:SAE=1818, NI=2048; !! NO OF TABLE ROWS IN TABLE ! ! RPSFAULTWEIGHTS ! ! Guiding value = 2048 !

!SAAII:SAE=1819, NI=16; !! NO OF WORK ROWS IN TABLE ! ! RPSFAULTWEIGHTS ! ! Guiding value = 16. !

!+---------------------+! !+ DB RPSPHYSRPTYPES +! !+---------------------+!

!SAAII:SAE=1820, NI=46; !! NO OF TABLE ROWS IN DATABASE ! ! TABLE RPSPHYSRPTYPES ! !SAAII:SAE=1821, NI=10; !! NO OF WORK ROWS IN DATABASE TABLE ! ! RPSPHYSRPTYPES ! ! Guiding value = 10. !

!+-----------------+! !+ DB RPSRPBSPOS +! !+-----------------+!


!------------------------------------------------------------! ! Number of Rows in the EXT.min:1 ! ! RPSRPISUPERVS table area. max:-32766 ! ! RED.min:1 ! ! max:- !

!------------------------------------------------------------!

SAAII:SAE=1823, NI=100; ! NO OF WORK ROWS IN DATABASE TABLE !


15/781

! RPSRPBSPOS ! ! Guiding value = 1 if RPB-S is not ! ! used. = 100 if RPB-S is used. ! !SAAII:SAE=1824, NI=0; !!(NEW) This SAE is not applicable ! ! for APZ 212 40 ! !SAAII:SAE=1825, NI=0; !!(NEW) This SAE is not applicable ! ! for APZ 212 40 !

SAAII:SAE=1826, NI=3000; SAAII:SAE=1827, NI=3000; SAAII:SAE=1828, NI=3000; SAAII:SAE=1829, NI=5000; SAAII:SAE=1830, NI=3000; SAAII:SAE=1831, NI=3000; SAAII:SAE=1832, NI=6013; ! LAD Communication Buffers W/ Size ! ! 2KW16 ! SAAII:SAE=1833, NI=11963; ! LAD Communication Buffers W/ Size ! ! 2KW16 ! SAAII:SAE=1834, NI=75; SAAII:SAE=1835, NI=75;

SAAII:SAE=1836, NI=75; !SAAII:SAE=1843, NI=512; !! SAFH Table Rows in DB table ! ! SAESUBS ! !SAAII:SAE=1844, NI=512; !! SAFH Work Area in DB table SAESUBS! !SAAII:SAE=1845, NI=3000; !! SAFCO Table Rows in LOCALSAES DB ! ! table ! !SAAII:SAE=1846, NI=512; !! SAFCO Work Area in LOCALSAES DB ! ! Table ! !SAAII:SAE=1848, NI=100; ! !SAAII:SAE=1849, NI=2000; !! SAFCO Table Rows in GLOBALSAES DB ! ! table ! SAAII:SAE=1850, NI=6432; ! NO OF RP'S * 16 BRS501BOARDS # of ! ! record for atoring HWI !

! information for boards located in ! ! MAG BYB 501. ! !SAAII:SAE=800,BLOCK=LADSD, NI=0; !!(NEW) COMMAND LADCC This SAE is ! ! not applicable for APZ 212 40 ! !SAAII:SAE=1851, NI=0; !!(NEW) max# of vars for ! ! measurement - APZ 212 33 This SAE ! ! is not applicable for APZ 212 40 !

! SAEs_FOR_(SYSTEM_MODULE_APZ)_(SUBSYSTEM_OCS) !

!SAAII:SAE=500,BLOCK=OCITS, NI=12; !! Number Of OCITS Individuals !

!N13!SAAII:SAE=888,BLOCK=LASCS,NI=100;

!$$$$!!05400,01!

!**************************! !* DEFINITION OF APG40C ***! !**************************!

!*************************************! !* ALLOCATE_RP_BUS_FOR_IPNA_BOARD ***! !*************************************!

!*** CHECK IPN BOARD PHYSICAL POSITION FIRST AND ADJUST ***!

DPRBC:LRPBI=31, PRPBI=21; !** This is not needed if APZ 212 40 is used.


16/781

**! DPRBC:LRPBI=31, RESBWM=20; !** This is not needed if APZ 212 40 is used.**! DPRBP; !** This is not needed if APZ 212 40 is used. **!

!*****************************************! !* DEFINE INTER PLATFORM NETWORK (IPN) ***! !*****************************************!

OCINI:IPN=0; !** This is not needed if APZ 212 40 is used. **! OCINI:IPN=1; !** This is not needed if APZ 212 40 is used. **!

!****************************! !* CONNECT_IPN_EQUIPMENT ***! !****************************!

OCIEI:IPN=0, EQM=OCITS-1; !** This is not needed if APZ 212 40 is used. **! OCIEI:IPN=1, EQM=OCITS-2; !** This is not needed if APZ 212 40 is used. **!

!**********************************************! !* CHANGE COMMAND CATEGORY OF APAMI COMMAND ***! !**********************************************!

IOCTI:COMMAND=APAMI, COCA=0;

!*******************************************! !*** AP Directory Address Data, Change !

!*******************************************!

!APDAC:AP=1,IP1=192.168.167.1,PORT1=10000;! !APDAC:AP=1,IP2=192.168.168.1,PORT2=10000;!

!***************! !* DEFINE AP ***! !***************!

APAMP; APAMI:AP=1, TYPE=0, DEVNUM1=1, DEVNUM2=2; APAMP;

!**********************************! !* DEFINE IO CONFIGURATION DATA ***! !**********************************!

IOCDI:APPL=CPF, NUM=1; IOCDI:APPL=MML01;

!*****************! !* DEBLOCK IPN ***! !*****************!

OCIBE:IPN=0; !** This is not needed if APZ 212 40 is used. **!

OCIBE:IPN=1; !** This is not needed if APZ 212 40 is used. **!


17/781

!$$$$!!10100,01!

!+-----------------------------------------------------------------------+! !+ Note: SAEs commented out means the NI value is already set higher +! !+ in the R11 MSC reference dump. +! !+ (NEW) means the SAE did not exist in the import data. +!

!+-----------------------------------------------------------------------+!

!+------------+! !+ CORE XSS +! !+------------+!

!+-------+! !+ TCS +! !+-------+!

SAAII:SAE=0, NI=1400; ! # of routes and test routes For ! ! each IT,OT,ASAM-type +2 For each !

! BT-type +4 ! SAAII:SAE=1, NI=59500; ! # of Call records block=TRACO ! SAAII:SAE=2, NI=25000; ! # of outgoing calls from TRAM ! SAAII:SAE=5, NI=1000; ! # of Traffic destinations ! SAAII:SAE=6, NI=600; ! B# mods in EOS ! SAAII:SAE=7, NI=500; ! Large BA in EOS ! SAAII:SAE=8, NI=300; ! Small BA in EOS !!C12! SAAII:SAE=9, NI=5140; ! # of EOSs ! SAAII:SAE=10, NI=3500; ! # of ANRSIs ! SAAII:SAE=11, NI=3000; ! Large BR in RCs ! SAAII:SAE=12, NI=500; ! Small BR in RCs ! SAAII:SAE=13, NI=1600; ! # of RCs ! SAAII:SAE=16, NI=5300; ! B# mods Use when icreasing SEA=17 !

ANBZI; ! Clear B-Number non-op side ! ! Must be done before SAE 17 ! SAAII:SAE=17, NI=48000; ! # of B# analysis modules x2 ! SAAII:SAE=97, NI=100; ! # of semipermanent conns. ! !ANAZI; ! ! Clear A-Number non-op side ! ! Must be done before SAE 109 ! SAAII:SAE=109, NI=150; ! A# analysis modules x2 ! SAAII:SAE=500,BLOCK=DROP, NI=401; ! # of task individuals used for ! ! rerouting of a dropped call and ! ! for the initiation of call drop ! ! back. ! SAAII:SAE=500,BLOCK=IA, NI=2002; ! # of task individuals !!D12!!SAAII:SAE=549,BLOCK=TDA, NI=10; ! ! # of analysis modules !!D12!!SAAII:SAE=550,BLOCK=TDA, NI=20; ! ! # of user references ! SAAII:SAE=604,BLOCK=TRACO, NI=2985; ! OIP message data record ! !SAAII:SAE=604,BLOCK=TRACOB, NI=0; !! B-OIP message data record !!D12!!SAAII:SAE=716,BLOCK=PREA, NI=100;! ! # of BNT analysis modules !!D12!!SAAII:SAE=717,BLOCK=PREA, NI=100;! ! # of X# analysis modules ! SAAII:SAE=607,BLOCK=DA, NI=10; ! # of carrier analysis ! SAAII:SAE=608,BLOCK=DA, NI=10; ! # of Bearer Address modification ! ! modules command BEASI, BEACI ! SAAII:SAE=609,BLOCK=DA, NI=10; ! # of analysis modules for the ! ! bearer address analysis command ! ! BEASI, BEACI !

! SAE 712, 736 are not used. The number of individuals may be set to zero.!

!SAAII:SAE=712,BLOCK=DA, NI=0; !


18/781

!SAAII:SAE=736,BLOCK=DA, NI=0; ! SAAII:SAE=607,BLOCK=GPDAN, NI=150; ! # of analysis modules ! SAAII:SAE=608,BLOCK=GPDAN, NI=150; ! # of analysis result modules ! SAAII:SAE=706,BLOCK=SECLOG, NI=100; ! semipermanent connections ! !SAAII:SAE=1102, NI=0; !! block=TRACOB, call records for ! ! using OIP for bearer applications.! !SAAII:SAE=500,BLOCK=SACOAM, NI=0; !! Collect Call Dialling Automatic !

! (CCDA) service ! SAAII:SAE=1147, NI=10; ! Block=RA, bearer routing case data!

!+------------------------------------------------------------------------! !+ SAEs required when Carrier Analysis is used (Equal Access) +! !+------------------------------------------------------------------------!

SAAII:SAE=607,BLOCK=CANA, NI=10; ! # of inds. in look up file ! SAAII:SAE=608,BLOCK=CANA, NI=10; ! # of inds. for carrier file ! SAAII:SAE=609,BLOCK=CANA, NI=10; ! # of inds. for branching ! SAAII:SAE=610,BLOCK=CANA, NI=10; ! # of inds. for result file !

!+-------+! !+ ESS +! !+-------+!

SAAII:SAE=500,BLOCK=TCIA, NI=775; ! XSS-RMP interface that transforms ! ! TCS interface into standard AUIF ! ! interface # of individuals ! !SAAII:SAE=500,BLOCK=TCIADUP,NI=0; !! No. of individuals. One device is ! ! seized when a call is setup from ! ! TCS towards AUIF for duplication ! !SAAII:SAE=500,BLOCK=AMMS, NI=32; !! Block AMMS holds a function for ! ! setting up a conference call ! ! between a number of subscribers !

! without the aid of an operator ! ! and without the need of ! ! preordering the call.This SAE ! ! individual is seized whenever a ! ! subscriber attempt to access to a ! ! conference is possible, it means ! ! that a request to establish a ! ! link between TRACO and AMMS is ! ! established. Traffic-sensitive. ! !SAAII:SAE=504,BLOCK=AMMS, NI=0; !! This SAE individual is used to ! ! store data related to a ! ! conference. There are 32 SAE ! ! individuals seized to store data ! ! related to several types of ! ! Route. Traffic-sensitive. !

!+-------+! !+ NMS +! !+-------+!

SAAII:SAE=629,BLOCK=ACCRRA, NI=8; ! TTC (Telecom. Technology ! ! Committee) Std. Signaling Points ! ! in all Networks ! SAAII:SAE=630,BLOCK=ACCRRA, NI=64; ! Number of Chinese Ministry of ! ! Posts and Telegraph (CMPT) !

! standard signaling points in ! ! network 2 ! SAAII:SAE=653,BLOCK=ROSA, NI=250; ! # of timetable modules !


19/781

SAAII:SAE=654,BLOCK=ROSA, NI=250; ! # of area modules ! SAAII:SAE=539,BLOCK=NEROS, NI=100; ! # of supervised routes ! !SAAII:SAE=718,BLOCK=RDAR, NI=0; !! # of control data individuals for ! ! route restriction ! !SAAII:SAE=719,BLOCK=RDAR, NI=0; !! # of BR modules for rte. res ! !SAAII:SAE=720,BLOCK=RDAR, NI=0; !! # of BR library indiduals ! !SAAII:SAE=721,BLOCK=RDAR, NI=0; !! # of response programs !

!SAAII:SAE=722,BLOCK=RDAR, NI=0; !! # of res. analysis trees !

!+-------+! !+ OMS +! !+-------+!

!SAAII:SAE=188, NI=0; !! Generated Test Traffic devices ! !SAAII:SAE=500,BLOCK=GTTA, NI=0; !! Test Schedule data for GTT ! ! function ! !SAAII:SAE=504,BLOCK=CANS, NI=0; !! # CANS routes ! SAAII:SAE=594,BLOCK=ROTS, NI=200; ! # of telephony signals ! SAAII:SAE=500,BLOCK=QUAS, NI=300; ! # of blocked devices !

SAAII:SAE=451, NI=825; ! # of devs./call path trace ! SAAII:SAE=500,BLOCK=SNBOO, NI=512; ! NI= SAE=608 Block= obman1 ! SAAII:SAE=500,BLOCK=FAUSBUF,NI=500; ! NI= INDIVIDUALS TO SUPPORT !

!+-----------------------------------------------------------------------+! !+ SAEs normally not used in CMS 40 +! !+-----------------------------------------------------------------------+!

!SAAII:SAE=500,BLOCK=CANSE, NI=0; !! # CANSE devices ! !SAAII:SAE=504,BLOCK=CANSE, NI=0; !! # CANSE routes ! !SAAII:SAE=500,BLOCK=CANSC, NI=0; !! # CANSC devices ! !SAAII:SAE=504,BLOCK=CANSC, NI=0; !! # CANSC routes !

!+-----------------------------------------------------------------------+!

!SAAII:SAE=529,BLOCK=CANSNT, NI=0; !! # of SNT-individuals. ! SAAII:SAE=500,BLOCK=TFSER, NI=24; ! # of test schedules ! SAAII:SAE=500,BLOCK=TFSEP, NI=24; ! # of TFSEP individual ! !SAAII:SAE=500,BLOCK=MOLT, NI=0; !! # of test jack ind. ! SAAII:SAE=500,BLOCK=TBLAD, NI=21; ! # of TBLAD inds ! SAAII:SAE=532,BLOCK=TRAD, NI=128; ! # of recording groups ! SAAII:SAE=534,BLOCK=TIMCOR, NI=256; ! # of recording individuals ! SAAII:SAE=534,BLOCK=TRAR, NI=256; ! # of recording individuals ! SAAII:SAE=503,BLOCK=TRADA, NI=255; ! # for traffic dispersion rec !


!SAAII:SAE=500,BLOCK=TONE, NI=0; ! !SAAII:SAE=504,BLOCK=TONE, NI=0; !! # of TONE routes ! !SAAII:SAE=500,BLOCK=TONED, NI=0; !! # OF TONED Device ! !SAAII:SAE=504,BLOCK=TONED, NI=0; !! # of TONE routes ! !SAAII:SAE=529,BLOCK=TONESNT,NI=0; !! # of TONESNT !

!+-------+! !+ CHS +! !+-------+!

SAAII:SAE=42, NI=92; ! # of charging Case ! SAAII:SAE=544,BLOCK=CATA, NI=743; ! # of nodes for call id. (CI) !


20/781

SAAII:SAE=545,BLOCK=CATA, NI=7; ! # of nodes for SSI ! SAAII:SAE=546,BLOCK=CATA, NI=644; ! # of nodes for SSP ! SAAII:SAE=547,BLOCK=CATA, NI=9200; ! # of nodes for SSP result ! SAAII:SAE=548,BLOCK=CATA, NI=844; ! # of index nodes or TSC, CI, ! SAAII:SAE=596,BLOCK=CATA, NI=83; ! # nodes for TEC ! SAAII:SAE=604,BLOCK=CA, NI=100; ! # of inds. with BR ! SAAII:SAE=605,BLOCK=CA, NI=100; ! # of inds. with BR !

SAAII:SAE=606,BLOCK=CA, NI=100; ! # of inds. with BR ! SAAII:SAE=607,BLOCK=CA, NI=100; ! # of charging programs ! SAAII:SAE=608,BLOCK=CA, NI=20; ! # of individuals for branching ! ! conditions with maximum value ! ! range 0-255. !

!+-----------------------------------------------------------------------+! !+ SAEs required when Accounting Feature is implemented +! !+-----------------------------------------------------------------------+!

!SAAII:SAE=28, NI=0; !! # of Accounting cases (ACC) ! !SAAII:SAE=211, NI=1; !! ACDMR Route Identification No. or !

! RINS in virtual exchange ! !SAAII:SAE=214, NI=0; !! # of simultaneous users of ! ! accounting analysis ! !SAAII:SAE=215, NI=1; !! # of 8 pos. maps for ACC ! !SAAII:SAE=216, NI=1; !! # of 16 pos. maps for ACC ! !SAAII:SAE=217, NI=1; !! # of 32 pos. maps for ACC ! !SAAII:SAE=218, NI=1; !! # of 64 pos. maps for ACC ! !SAAII:SAE=219, NI=1; !! # of 8 pos. BR mods. in ACC ! !SAAII:SAE=220, NI=1; !! # of 16 pos. BR mods. in ACC ! !SAAII:SAE=221, NI=1; !! # of 32 pos. BR mods. in ACC ! !SAAII:SAE=222, NI=1; !! # of 64 pos. BR mods. in ACC ! !SAAII:SAE=223, NI=1; !! # of128 pos. BR mods. in ACC ! !SAAII:SAE=224, NI=1; !! # of256 pos. BR mods. in ACC !

!SAAII:SAE=225, NI=1; !! # of ACC case identities ! !SAAII:SAE=226, NI=1; !! # of routes for RAG or RAT ! !SAAII:SAE=227, NI=1; !! # of RNO,NAG,NAT for ACC ! SAAII:SAE=650,BLOCK=ACDM, NI=17; ! # of counter records ! SAAII:SAE=651,BLOCK=ACDMO, NI=100; ! # monitor recs. for fault ! !SAAII:SAE=500,BLOCK=IAEPH, NI=0; !! SAE, IAS ! !SAAII:SAE=512,BLOCK=IAEPH, NI=0; !! SAE, IAS ! !SAAII:SAE=604,BLOCK=IAEPH, NI=0; !! SAE, IAS ! !SAAII:SAE=515,BLOCK=IADIPE1,NI=0; !! SAE, IAS ! !SAAII:SAE=500,BLOCK=IADIPH1,NI=0; !! SAE, IAS ! !SAAII:SAE=529,BLOCK=IAETE1, NI=0; !! SAE, IAS ! !SAAII:SAE=500,BLOCK=IABTE1, NI=0; !! SAE, IAS ! !SAAII:SAE=504,BLOCK=IABTE1, NI=0; !! SAE, IAS ! !SAAII:SAE=512,BLOCK=IABTE1, NI=0; !! SAE, IAS ! !SAAII:SAE=515,BLOCK=IADIPT1,NI=1; !! SAE, IAS ! !SAAII:SAE=529,BLOCK=IAETT1, NI=1; !! SAE, IAS ! !SAAII:SAE=500,BLOCK=IABTT1, NI=0; !! SAE, IAS ! !SAAII:SAE=504,BLOCK=IABTT1, NI=0; !! SAE, IAS ! !SAAII:SAE=512,BLOCK=IABTT1, NI=0; !! SAE, IAS ! !SAAII:SAE=529,BLOCK=IAETDL2,NI=0; !! SAE, IAS ! !SAAII:SAE=500,BLOCK=IABTDL2,NI=0; !! SAE, IAS ! !SAAII:SAE=504,BLOCK=IABTDL2,NI=0; !! SAE, IAS ! !SAAII:SAE=512,BLOCK=IABTDL2,NI=0; !! SAE, IAS !

!+-------+!

!+ TSS +! !+-------+!


21/781

!SAAII:SAE=604,BLOCK=DJTRI, NI=0; !! # OF OIP message from or to TRAM ! !SAAII:SAE=604,BLOCK=DJTRO, NI=0; !! # OF OIP message from or to TRAM !


SAAII:SAE=611,BLOCK=UPCMA, NI=10; ! UP Test file Inds ! SAAII:SAE=612,BLOCK=UPCMA, NI=10; ! UP dev. # to be tested ! SAAII:SAE=613,BLOCK=UPCMA, NI=10; ! UP # of result for tested !

!+-----------------------------------------------------------------------+!

SAAII:SAE=700,BLOCK=UPMON, NI=21; ! UP monitor (Optional) ! SAAII:SAE=701,BLOCK=UPMON, NI=100; ! UP monitor (Optional) !

! TSS-2 !

!SAAII:SAE=504,BLOCK=UPDNA, NI=0; !! # of routes !

!SAAII:SAE=504,BLOCK=UPDNAM, NI=0; !! # of routes ! SAAII:SAE=504,BLOCK=UPDNA51,NI=50; ! # of routes ! !SAAII:SAE=504,BLOCK=UPDR, NI=0; !! # of routes ! !SAAII:SAE=600,BLOCK=UPDNA, NI=0; !! # of PCM groups ! !SAAII:SAE=600,BLOCK=UPDNAM, NI=0; !! # of PCM groups ! SAAII:SAE=600,BLOCK=UPDNA51,NI=10; ! # of PCM groups ! !SAAII:SAE=600,BLOCK=UPDR, NI=0; !! # of PCM groups ! SAAII:SAE=500,BLOCK=UPDL, NI=500; ! # of devices ! SAAII:SAE=500,BLOCK=UPLTD, NI=21168; ! # of devices (Before UPDC) ! SAAII:SAE=500,BLOCK=UPDC, NI=21168; ! # of devices (After UPLTD) ! SAAII:SAE=504,BLOCK=UPDC, NI=400; ! # of routes ! SAAII:SAE=512,BLOCK=UPLTD, NI=200; ! # of destinaation inds. ! SAAII:SAE=513,BLOCK=UPLTD, NI=9000; ! # of catalogue inds. !

SAAII:SAE=639,BLOCK=UPLTD, NI=200; ! # of SPUP individuals ! SAAII:SAE=645,BLOCK=UPUIA, NI=1537; ! # of inds. Stores unrecgonized ! ! signaling information handling ! ! data ! SAAII:SAE=646,BLOCK=UPCCC, NI=500; ! # of routes with Con. Check ! ! unrecgonized signaling information! SAAII:SAE=734,BLOCK=UPS, NI=10; ! UP screening # of inds ! SAAII:SAE=735,BLOCK=UPS, NI=10; ! UP screening # of inds ! SAAII:SAE=500,BLOCK=UPAPITB,NI=32000; ! Same as SAE500, UPDNA/UPDNAM ! SAAII:SAE=500,BLOCK=UPAPOTB,NI=32000; ! Same as SAE500, UPAPITB ! SAAII:SAE=646,BLOCK=UPAPITB,NI=2000; ! Same as SAE500, UPAPITB ! SAAII:SAE=646,BLOCK=UPAPOTB,NI=2000; ! Same as SAE500, UPAPITB ! SAAII:SAE=500,BLOCK=UPAMHRB,NI=32000; ! Same as SAE500, UPAPITB ! SAAII:SAE=500,BLOCK=UPAMHSB,NI=32000; ! Same as SAE500, UPAPITB ! SAAII:SAE=500,BLOCK=UPPCB, NI=32000; ! Same as SAE500, UPAPITB ! SAAII:SAE=500,BLOCK=UPPHSB, NI=3500; SAAII:SAE=500,BLOCK=UPAPHMB,NI=1620; ! Same as SAE500, UPDNA/UPDNAM. ! ! Maximum = 16383 ! SAAII:SAE=646,BLOCK=UPAMHRB,NI=3303; ! Buffer for receved messages ! SAAII:SAE=647,BLOCK=UPAMHSB,NI=3303; ! Buffer for sent messages ! SAAII:SAE=730,BLOCK=UPAMHRB,NI=1000; ! UP Screening ! SAAII:SAE=730,BLOCK=UPAMHSB,NI=1000; ! UP Screening ! SAAII:SAE=731,BLOCK=UPAMHRB,NI=1000; ! UP Screening ! SAAII:SAE=731,BLOCK=UPAMHSB,NI=1000; ! UP Screening each remote or local ! ! CQT/CVT !

!SAAII:SAE=500,BLOCK=UPAPITA,NI=0; !! Block= = UPAPITA ! !SAAII:SAE=500,BLOCK=UPAPOTA,NI=0; !! Block= = UPAPOTA ! !SAAII:SAE=646,BLOCK=UPAPITA,NI=0; !! Block= = UPAPITA !


22/781

!SAAII:SAE=646,BLOCK=UPAPOTA,NI=0; !! Block= = UPAPOTA ! !SAAII:SAE=500,BLOCK=UPAMHRA,NI=0; !! Block= = UPAMHRA Number of task ! ! individuals ! !SAAII:SAE=500,BLOCK=UPAMHSA,NI=0; !! Block= = UPAMHSA ! !SAAII:SAE=500,BLOCK=UPPCA, NI=0; !! Block= = UPPCA ! !SAAII:SAE=500,BLOCK=UPPHSA, NI=0; !! Block= = UPPHSA ! !SAAII:SAE=500,BLOCK=UPAPHMA,NI=0; !! Block= = UPAPHMA !

!SAAII:SAE=646,BLOCK=UPAMHRA,NI=0; !! Buffer for receved messages ! !SAAII:SAE=647,BLOCK=UPAMHSA,NI=0; !! Buffer for sent messages ! !SAAII:SAE=730,BLOCK=UPAMHRA,NI=0; !! UP Screening ! !SAAII:SAE=730,BLOCK=UPAMHSA,NI=0; !! UP Screening ! !SAAII:SAE=731,BLOCK=UPAMHRA,NI=0; !! UP Screening ! !SAAII:SAE=731,BLOCK=UPAMHSA,NI=0; !! UP Screening !

!+ SAEs for ISUP4 Traffic +!

!SAAII:SAE=504,BLOCK=UPD1, NI=0; !! # of routes ! !SAAII:SAE=600,BLOCK=UPD1, NI=0; !! # of PCM groups ! !SAAII:SAE=504,BLOCK=UPD, NI=0; !! # of routes !

!SAAII:SAE=600,BLOCK=UPD, NI=0; !! # of PCM groups ! !SAAII:SAE=500,BLOCK=UPDR, NI=0; !! supports only 32-channel PCM. ! !SAAII:SAE=500,BLOCK=UPPHS4S,NI=0; !! # of individuals seized at the ! ! start of each remote or local ! ! CQT/CVT ! !SAAII:SAE=500,BLOCK=UPMHR4S,NI=0; !! # of task individuals. ! !SAAII:SAE=500,BLOCK=UPMHS4S,NI=0; !! # of task individuals. ! !SAAII:SAE=500,BLOCK=UPPHM4, NI=0; !! # of task individuals. ! !SAAII:SAE=500,BLOCK=UPPHIT4,NI=0; !! # of incoming trunks. ! !SAAII:SAE=646,BLOCK=UPPHIT4,NI=0; !! # of Message Queue data ! !SAAII:SAE=500,BLOCK=UPPHOT4,NI=0; ! !SAAII:SAE=646,BLOCK=UPPHOT4,NI=0; !! # of Message Queue data ! !SAAII:SAE=646,BLOCK=UPMHR4S,NI=0; !! # of buffer individuals. !

!SAAII:SAE=647,BLOCK=UPMHS4S,NI=0; !! # of buffer individuals. ! !SAAII:SAE=500,BLOCK=UPPC4S, NI=0; !! # of task individuals. ! !SAAII:SAE=730,BLOCK=UPMHR4S,NI=0; ! !SAAII:SAE=731,BLOCK=UPMHR4S,NI=0; ! !SAAII:SAE=730,BLOCK=UPMHS4S,NI=0; ! !SAAII:SAE=731,BLOCK=UPMHS4S,NI=0; !

! TSS-4 !

!SAAII:SAE=504,BLOCK=BT4, NI=0; !! # of BT4 routes ! !SAAII:SAE=504,BLOCK=BT4M, NI=0; !! # of BT4M Routes ! SAAII:SAE=500,BLOCK=SSC, NI=50; ! ANPSI commands related ANPSI x 2. ! ! NI=100 recommended !

! TSS-6 !

!SAAII:SAE=504,BLOCK=BTR1, NI=0; !! # of BTR1 routes ! !SAAII:SAE=504,BLOCK=BTR1M, NI=0; !! # of BTR1M Routes !

!+ User Part Physical Device Remote +!

!SAAII:SAE=500,BLOCK=UPDNAMR,NI=0; !! User Part Physical Device Remote ! !SAAII:SAE=504,BLOCK=UPDNAMR,NI=0; !! User Part Physical Device Remote ! !SAAII:SAE=600,BLOCK=UPDNAMR,NI=0; !! User Part Physical Device Remote ! SAAII:SAE=500,BLOCK=UPDNAR1,NI=24000; ! User Part Physical Device Remote !

SAAII:SAE=504,BLOCK=UPDNAR1,NI=200; ! User Part Physical Device Remote ! SAAII:SAE=600,BLOCK=UPDNAR1,NI=700; ! User Part Physical Device Remote !


23/781

!+ BICC 1.4 PROTOCOL +!

!SAAII:SAE=500,BLOCK=BIBAT, NI=0; !! Bearer Independent Bearer ! ! Association Transport !!N12!SAAII:SAE=500,BLOCK=BIBATI, NI=0; !! Bearer Independent Bearer ! ! Association Transport ! !SAAII:SAE=504,BLOCK=BIBAT, NI=0; !! bothway route to Signalling End !

! Point (SEP) !!N12!SAAII:SAE=504,BLOCK=BIBATI, NI=0; !! bothway route to Signalling End ! ! Point (SEP) ! !SAAII:SAE=500,BLOCK=BID, NI=0; !! Bearer Independent Device and ! ! Coordination !!N12!SAAII:SAE=500,BLOCK=BIDI, NI=0; !! Bearer Independent Device and ! ! Coordination ! !SAAII:SAE=504,BLOCK=BID, NI=0; !! Bearer Independent Device and ! ! Coordination !!N12!SAAII:SAE=504,BLOCK=BIDI, NI=0; !! Bearer Independent Device and ! ! Coordination ! !SAAII:SAE=512,BLOCK=BID, NI=0; !! Bearer Independent Device and !

! Coordination !!N12!SAAII:SAE=512,BLOCK=BIDI, NI=0; !! This local SAE is used for altering ! ! the number of destination individuals.! !SAAII:SAE=513,BLOCK=BID, NI=0; !! Bearer Independent Device and ! ! Coordination !!N12!SAAII:SAE=513,BLOCK=BIDI, NI=0; !! This local SAE is used for translating! ! a CIC to a device pointer. !!N12!SAAII:SAE=731,BLOCK=BIS, NI=0; !! Block BIS is the administration ! ! part of the BICC screening. ! !SAAII:SAE=500,BLOCK=BIMHR, NI=0; !! Bearer Independent Message !

! Handler Receiving !!N12!SAAII:SAE=500,BLOCK=BIMHRI, NI=0; !! Bearer Independent Message ! ! Handler Receiving ! !SAAII:SAE=504,BLOCK=BIMHR, NI=0; !! Bearer Independent Message ! ! Handler Receiving !!N12!SAAII:SAE=504,BLOCK=BIMHRI, NI=0; !! Bearer Independent Message ! ! Handler Receiving ! !SAAII:SAE=646,BLOCK=BIMHR, NI=0; !! Bearer Independent Message ! ! Handler Receiving !!N12!SAAII:SAE=646,BLOCK=BIMHRI, NI=0; !! Bearer Independent Message ! ! Handler Receiving ! !SAAII:SAE=730,BLOCK=BIMHR, NI=0; !! Bearer Independent Message ! ! Handler Receiving !!N12!SAAII:SAE=730,BLOCK=BIMHRI, NI=0; !! Bearer Independent Message ! ! Handler Receiving ! !SAAII:SAE=731,BLOCK=BIMHR, NI=0; !! Bearer Independent Message ! ! Handler Receiving !!N12!SAAII:SAE=731,BLOCK=BIMHRI, NI=0; !! Bearer Independent Message ! ! Handler Receiving ! !SAAII:SAE=500,BLOCK=BIMHS, NI=0; !! Bearer Independent Message ! ! Handler Sending !!N12!SAAII:SAE=500,BLOCK=BIMHSI, NI=0; !! Bearer Independent Message ! ! Handler Sending ! !SAAII:SAE=504,BLOCK=BIMHS, NI=0; !! Bearer Independent Message ! ! Handler Sending !

!N12!SAAII:SAE=504,BLOCK=BIMHSI, NI=0; !! Bearer Independent Message ! ! Handler Sending ! !SAAII:SAE=730,BLOCK=BIMHS, NI=0; !! Bearer Independent Message !


24/781

! Handler Sending !!N12!SAAII:SAE=730,BLOCK=BIMHSI, NI=0; !! Bearer Independent Message ! ! Handler Sending ! !SAAII:SAE=731,BLOCK=BIMHS, NI=0; !! Bearer Independent Message ! ! Handler Sending !!N12!SAAII:SAE=731,BLOCK=BIMHSI, NI=0; !! Bearer Independent Message ! ! Handler Sending !

!SAAII:SAE=500,BLOCK=BIPHM, NI=0; !! Bearer Independent Protocol ! ! Handler Maintenance !!N12!SAAII:SAE=500,BLOCK=BIPHMI, NI=0; !! Bearer Independent Protocol ! ! Handler Maintenance ! !SAAII:SAE=500,BLOCK=BIPHT, NI=0; !! Bearer Independent Protocol ! ! Handler Traffic !!N12!SAAII:SAE=500,BLOCK=BIPHTI, NI=0; !! Bearer Independent Protocol ! ! Handler Traffic ! !SAAII:SAE=501,BLOCK=BIPHT, NI=0; !! Bearer Independent Protocol ! ! Handler Traffic !!N12!SAAII:SAE=501,BLOCK=BIPHTI, NI=0; !! Bearer Independent Protocol ! ! Handler Traffic !

!SAAII:SAE=502,BLOCK=BIPHT, NI=0; !! Bearer Independent Protocol ! ! Handler Traffic !!N12!SAAII:SAE=502,BLOCK=BIPHTI, NI=0; !! Bearer Independent Protocol ! ! Handler Traffic ! !SAAII:SAE=504,BLOCK=BIPHT, NI=0; !! Bearer Independent Protocol ! ! Handler Traffic !!N12!SAAII:SAE=504,BLOCK=BIPHTI, NI=0; !! Bearer Independent Protocol ! ! Handler Traffic ! ! store BIPHT route data. ! SAAII:SAE=701,BLOCK=BIMON, NI=291; ! Bearer Independent Call Control ! ! Monitoring ! !SAAII:SAE=500,BLOCK=PODRS, NI=0; !! Protocol Disturbance Recording ! ! and Supervision !

SAAII:SAE=731,BLOCK=UPS, NI=1000; ! screening mask during Function ! ! Change ! !SAAII:SAE=500,BLOCK=TQ, NI=0; !! NI of SAE=500, BLOCK=UPPCB SAE ! ! 500 defines the number of call ! ! data individuals used to store ! ! call-related data and the number ! ! of MSGR data individuals which ! ! are used to store incoming and ! ! outgoing side message receiver ! ! device. ! !SAAII:SAE=604,BLOCK=TQ, NI=0; !! NI=1200 recommended Block TQ ! ! stores in SAE 604 the data ! ! related to OIP messages. ! ! MGCF SIP-I based networks !

! Set total number of simultaneous SIP calls in the exchange !!N13!SAAII:BLOCK=TPC,SAE=500,NI=1000;

! Set total number of simultaneous SIP calls in the exchange !!N13!SAAII:BLOCK=TPC,SAE=501,NI=100;

! Set the number of Route Set Information (RSI) individuals (IBROI) !!N13!SAAII:BLOCK=TPC,SAE=504,NI=50;

! Set the number of remote host individuals (IBHOI) !

!N13!SAAII:BLOCK=TPC,SAE=512,NI=50;

! Set the number of individuals to store traffic data required to establish


25/781

SIP transactions !!N13!SAAII:BLOCK=TPC,SAE=604,NI=500;

! Set the number of individuals to store traffic data required to establish SIP dialogs !!N13!SAAII:BLOCK=TPC,SAE=605,NI=500;

! Set the number of individuals to store traffic data used by SIP dialogs and SIP transactions !!N13!SAAII:BLOCK=TPC,SAE=606,NI=2500;

! Set the number of individuals are used to store DNS resolving related traffic data required for establishing SIP sessions (calls) where DNS procedures are involved. !!N13!SAAII:BLOCK=TPC,SAE=607,NI=10500;

! Set the number of individuals to store configuration domain data (DNDNI)!!N13!SAAII:BLOCK=DNSREP,SAE=511,NI=200;

! Set the number of individuals to store Transport Control Protocol (TCP) client or TCP server (child) sockets data !!N13!SAAII:BLOCK=TRSIP,SAE=500,NI=2500;

! Set the number of individuals to store session data !!N13!SAAII:BLOCK=SIPHOT,SAE=500,NI=25000;

! Set the number of individuals to store route data !!N13!SAAII:BLOCK=SIPHOT,SAE=504,NI=50;

! Set the number of buffer individuals are used to store OIP messages and related data !

!N13!SAAII:BLOCK=SIPHOT,SAE=604,NI=100;

! Set the number of transaction individuals are used to keep track about curently processed SIP transactions !!N13!SAAII:BLOCK=SIPHOT,SAE=605,NI=500;

! Set the number of individuals to store session data !!N13!SAAII:BLOCK=SIPHIT,SAE=500,NI=25000;

! Set the number of individuals to store route data !!N13!SAAII:BLOCK=SIPHIT,SAE=504,NI=50;

! Set the number of buffer individuals are used to store OIP messages and related data !!N13!SAAII:BLOCK=SIPHIT,SAE=604,NI=100;

! Set the number of transaction individuals are used to keep track about curently processes SIP transactions !!N13!SAAII:BLOCK=SIPHIT,SAE=605,NI=500;

! Set the number of individuals to store session related data !!N13!SAAII:BLOCK=SIPBC,SAE=500,NI=25000;

! Set the number of individuals to store route data !!N13!SAAII:BLOCK=SIPBC,SAE=504,NI=50;

!N13!SAAII:BLOCK=SIPBC,SAE=606,NI=50;

! Set the number of individuals to store session data !


26/781

!N13!SAAII:BLOCK=SIPCO,SAE=500,NI=25000;

! Set the number of individuals to store route data !!N13!SAAII:BLOCK=SIPCO,SAE=504,NI=50;

! Set the number of individuals to store SIPCO Session Initiation Protocol(SIP) Trunk Configuration Information (SCI) data !

!N13!SAAII:BLOCK=SIPCO,SAE=512,NI=51;

!N13!SAAII:BLOCK=SIPMD,SAE=500,NI=32;!N13!SAAII:BLOCK=SIPME,SAE=500,NI=32;

!N13!SAAII:BLOCK=SIPMD,SAE=504,NI=12;!N13!SAAII:BLOCK=SIPME,SAE=504,NI=12;

!N13!SAAII:BLOCK=SIPMD1,SAE=500,NI=32;!N13!SAAII:BLOCK=SIPME1,SAE=500,NI=32;

!N13!SAAII:BLOCK=SIPMD1,SAE=504,NI=12;

!N13!SAAII:BLOCK=SIPME1,SAE=504,NI=12;

!N13!SAAII:BLOCK=SIPMD, SAE=731,NI=32;!N13!SAAII:BLOCK=SIPME, SAE=731,NI=32;

!N13!SAAII:SAE=500, BLOCK=SUADR, NI=0;!N13!SAAII:SAE=502, BLOCK=SUADR, NI=0;!N13!SAAII:SAE=503, BLOCK=SUADR, NI=0;!N13!SAAII:SAE=504, BLOCK=SUADR, NI=0;!N13!SAAII:SAE=505, BLOCK=SUADR, NI=0;!N13!SAAII:SAE=506, BLOCK=SUADR, NI=0;

! M2PA !

! SAE 604 in M2PA block: outgoing buffer file!!N13!SAAII:SAE=604,BLOCK=M2PA, NI=128;

! SAE 605 in M2PA block: incoming buffer file!!N13!SAAII:SAE=605,BLOCK=M2PA, NI=128;

!The Blocks participating in the SAE are IUAUSER, MHPRAG,!!LIPRRMG, and DIPSTR!

! Primary Rate Access ETSI Only !!N13!!SAAII:SAE=500,BLOCK=IUAUSER,NI=128; !!N13!!SAAII:SAE=500,BLOCK=MHPRAG, NI=128; !!N13!!SAAII:SAE=500,BLOCK=LIPRRMG,NI=35; !!N13!!SAAII:SAE=501,BLOCK=IUAUSER,NI=32; !!N13!!SAAII:SAE=561,BLOCK=MHPRAG, NI=32; !!N13!!SAAII:SAE=515,BLOCK=DIPSTR, NI=32; !

!N13!SAAII:SAE=500,BLOCK=SSAS,NI=2048;!N13!SAAII:SAE=501,BLOCK=SSAS,NI=2048;

!N13!SAAII:SAE=500,BLOCK=VMIPADM,NI=10;!N13!SAAII:SAE=500,BLOCK=VMIPSTS,NI=10;

!$$$$!!10110,01!


27/781

!+-----------------------------------------------------------------------+! !+ Note: SAEs commented out means the NI value is already set higher +! !+ in the R11 MSC reference dump. +! !+ (NEW) means the SAE did not exist in the import data. +! !+-----------------------------------------------------------------------+!

!+---------+! !+ MAGAM +! !+---------+!

!+-------+! !+ LSS +! !+-------+!

! This is for mobile positioning feature. !

SAAII:SAE=500,BLOCK=MPSLAP, NI=58; ! SAE 500 individuals to store data ! ! for the MAP V3 Provide Subscriber !

! Location" operation. ! SAAII:SAE=500,BLOCK=MPELAP, NI=176; ! SAE 500 individuals to store data ! ! for the MAP V3 "Perform Location" ! ! operation. ! SAAII:SAE=500,BLOCK=MLSC, NI=1072; ! SAE 500 individuals to store ! ! positioning and location data for ! ! a mobile station. ! SAAII:SAE=500,BLOCK=MLSPCH, NI=107; ! SAE 500 individuals to store data ! ! needed to perform LCS privacy and ! ! subscription checks ! SAAII:SAE=500,BLOCK=MSLRAP, NI=500; ! SAE 500 individuals to fetch, ! ! analyse & store data for MAP ! ! operation "Subscriber_ !

! Location_Report". ! SAAII:SAE=500,BLOCK=MSLRAP, NI=1000; SAAII:SAE=500,BLOCK=MSLRAP, NI=1500; SAAII:SAE=500,BLOCK=MSLRAP, NI=2000; SAAII:SAE=500,BLOCK=MSLRAP, NI=2500; SAAII:SAE=500,BLOCK=MSLRAP, NI=3000; SAAII:SAE=500,BLOCK=MSLRAP, NI=3500; SAAII:SAE=500,BLOCK=MSLRAP, NI=4000; SAAII:SAE=500,BLOCK=MSLRAP, NI=4500; SAAII:SAE=500,BLOCK=MSLRAP, NI=5000; SAAII:SAE=500,BLOCK=MSLRAP, NI=5500; SAAII:SAE=500,BLOCK=MSLRAP, NI=6000; SAAII:SAE=500,BLOCK=MSLRAP, NI=6500; SAAII:SAE=500,BLOCK=MSLRAP, NI=7000; SAAII:SAE=500,BLOCK=MSLRAP, NI=7291; SAAII:SAE=500,BLOCK=MLSQ, NI=644; ! MT-LR with POI set or E911 ! ! positioning request ! SAAII:SAE=500,BLOCK=MSTEH, NI=10; ! MSTEH handles the traffic part of ! ! the Spatial Tiggers function in ! ! MSC/VLR. During traffic, MSTEH is ! ! ordered to initiate the sending ! ! of positioning information to ! ! GMLC through the use of standard ! ! MAP V3 message 'Subscriber ! ! Location Report' SAE 500 is !

! traffic-sensitive. Block MSTEH ! ! uses SAE 500 to store data needed ! ! to perform the notification of !


28/781

! the GMLC with the mobile ! ! subscriber's positioning ! ! information !

!+-------+! !+ MDS +! !+-------+!

SAAII:SAE=36, NI=3000; ! # of hundreds MS in VLR(MTV). ! ! NI=500 recommended (MBRIA) non-op ! ! side. Must be done before SAE 77 ! !MGIZI; ! ! Clear IMSI number series analysis ! ! non-op side. ! ! Must be done before SAE 77 ! SAAII:SAE=77, NI=1000; ! # of IMSI # series (MGISI) ! SAAII:SAE=132, NI=500; ! # of cell (MTRAN) ! SAAII:SAE=132, NI=1000; SAAII:SAE=132, NI=1500; SAAII:SAE=132, NI=2000;

SAAII:SAE=203, NI=1200; ! SAE = 50% of SAE=077 (MNSAN) ! SAAII:SAE=255, NI=8; ! # of BSC (MTRAN) ! SAAII:SAE=263, NI=1500; ! # of HLR addresses (MHLRAD) ! SAAII:SAE=274, NI=10; ! # neighbor MSC (MGNMI/MTRAN) ! SAAII:SAE=448, NI=10; ! # of coop. VLRs (MTRAN) ! SAAII:SAE=500,BLOCK=MADAP, NI=500; ! MAP V3 operation "Send ! ! Authentication Info". ! SAAII:SAE=500,BLOCK=MADAP, NI=967; SAAII:SAE=500,BLOCK=MAPTC, NI=429; ! NI = SAE=036 !

! MOBILITY TRIGGERS IN IN !

SAAII:SAE=500,BLOCK=MDPAP, NI=734; ! Number of operations for "MAP V2. !

! 100K subsc. ni=273 ! SAAII:SAE=500,BLOCK=MDPH, NI=142; ! Number of open, i.e. not gsmSCP ! ! triggered detection points ! ! encountered during LUPD and ! ! implicit detach 100K subsc. ni=58 ! SAAII:SAE=602,BLOCK=MDPH, NI=1000; ! Number of detection points data ! ! individuals defined for certian ! ! IMSI number s series. NI=Number ! ! of IMSI number with detection ! ! point data defined in VLR. ! ! recommended value:1000 ! SAAII:SAE=603,BLOCK=MDPH, NI=3900; ! Number of individuals to Store ! ! IMSI number serie Digits. ! ! recommended value:3900 ! SAAII:SAE=500,BLOCK=MRESTAP,NI=233; ! sae = 263 ! SAAII:SAE=500,BLOCK=MFDAP, NI=500; ! MAP V1 operation "Send ! ! Parameters" and MAP V2 operation ! ! "Send Authentication Info". ! SAAII:SAE=500,BLOCK=MFDAP, NI=1000; SAAII:SAE=500,BLOCK=MFDAP, NI=1500; SAAII:SAE=500,BLOCK=MFDAP, NI=2000; SAAII:SAE=500,BLOCK=MFDAP, NI=2500; SAAII:SAE=500,BLOCK=MFDAP, NI=3000; SAAII:SAE=500,BLOCK=MFDAP, NI=3500; SAAII:SAE=500,BLOCK=MFDAP, NI=3874;

SAAII:SAE=500,BLOCK=MHPNAP, NI=67; ! MAP V2 operations "HPN Initiate" ! ! and "HPN Forward". ! SAAII:SAE=500,BLOCK=MLCAP, NI=226; ! Location Cancellation MAP !


29/781

!C12!SAAII:SAE=500,BLOCK=MRNAP, NI=12025; ! NI=1200 is recomended ! ! Maximum step size increase No limit! SAAII:SAE=500,BLOCK=MSDH, NI=200; ! NI=200 is recommended ! !SAAII:SAE=500,BLOCK=MSDH1, NI=0; !! NI=400 recommended ! SAAII:SAE=500,BLOCK=MSDH2, NI=500; ! NI=500 recommended ! SAAII:SAE=500,BLOCK=MSDH3, NI=1100; ! Each task individual handles the !

! analysis and storage of data for ! ! the messages "insert subscriber ! ! data", "update location", and ! ! "restore data". ! SAAII:SAE=500,BLOCK=MPSIAP, NI=96; ! Number of operations for "Provide ! ! Subscriber information", typical ! ! values and 100k subscribers are ! ! used in this case for ni=20 ! !SAAII:SAE=602,BLOCK=MTVIN, NI=0; !! CAMEL, NUMBER OF OCSI ! ! SUBSCRIPTION INFORMATION FOR ! ! VISITING, typical values and 100k ! ! subscribers are used in this case !

! for ni=15000 ! !SAAII:SAE=603,BLOCK=MTVIN, NI=0; !! CAMEL, NUMBER OF MISI FOR VI ! ! SITING MOBILE SUBSCRIBERS, ! ! typical values and 100k ! ! subscribers are used in this case ! ! for ni=20000 ! !SAAII:SAE=622,BLOCK=MTVIN, NI=0; !! individuals to store data related ! ! to SS-CSI for visiting mobile ! ! subscribers. ! !SAAII:SAE=629,BLOCK=MTVIN, NI=0; !! SMS-CSI data set for visiting ! ! mobile subscribers in MSC/VLR. ! SAAII:SAE=500,BLOCK=MTRAP, NI=100; ! individuals to store data for MAP ! ! V2 and MAP V3 "Activate Trace !

! Mode" and "Deactivate Trace Mode" ! ! operations. ! !SAAII:SAE=500,BLOCK=MPROIAP,NI=0; !! individuals to store data for ! ! MAPV2 operation Provide ! ! Subscriber Information . ! SAAII:SAE=901, NI=50; ! # of LATAs (MGLNI/MTRAN) ! SAAII:SAE=1096, NI=1500; ! MTRAN ,SAE 1096 individuals to ! ! store data for Emergency Centres ! ! (ECs). ! !SAAII:SAE=1100, NI=0; !! MTRAN, # of Radio Network ! ! Controllers(RNCs). ! !SAAII:SAE=1137, NI=0; !! MTRAN, # of MGAAI commands for ! ! areas ! SAAII:SAE=500,BLOCK=MSSPAP, NI=400; ! NI = SAE=036 ! SAAII:SAE=500,BLOCK=MLUAP, NI=500; ! mobile Location Updating MAP ! SAAII:SAE=500,BLOCK=MLUAP, NI=1000; SAAII:SAE=500,BLOCK=MLUAP, NI=1500; SAAII:SAE=500,BLOCK=MLUAP, NI=2000; SAAII:SAE=500,BLOCK=MLUAP, NI=2500; SAAII:SAE=500,BLOCK=MLUAP, NI=3000; SAAII:SAE=500,BLOCK=MLUAP, NI=3500; SAAII:SAE=500,BLOCK=MLUAP, NI=4000; SAAII:SAE=500,BLOCK=MLUAP, NI=4500; SAAII:SAE=500,BLOCK=MLUAP, NI=5000; SAAII:SAE=500,BLOCK=MLUAP, NI=5144;

SAAII:SAE=500,BLOCK=MSRAP, NI=242; ! NI=150 recommended ! SAAII:SAE=500,BLOCK=MSDAP, NI=200; ! NI=200 recommended ! SAAII:SAE=500,BLOCK=MMAPVS, NI=500; ! MAP operation !


30/781

SAAII:SAE=500,BLOCK=MMAPVS, NI=1000; SAAII:SAE=500,BLOCK=MMAPVS, NI=1500; SAAII:SAE=500,BLOCK=MMAPVS, NI=2000; SAAII:SAE=500,BLOCK=MMAPVS, NI=2500; SAAII:SAE=500,BLOCK=MMAPVS, NI=3000; SAAII:SAE=500,BLOCK=MMAPVS, NI=3500; SAAII:SAE=500,BLOCK=MMAPVS, NI=4000;

SAAII:SAE=500,BLOCK=MMAPVS, NI=4500; SAAII:SAE=500,BLOCK=MMAPVS, NI=5000; SAAII:SAE=500,BLOCK=MMAPVS, NI=5500; SAAII:SAE=500,BLOCK=MMAPVS, NI=6000; SAAII:SAE=500,BLOCK=MMAPVS, NI=6500; SAAII:SAE=500,BLOCK=MMAPVS, NI=7000; SAAII:SAE=500,BLOCK=MMAPVS, NI=7500; SAAII:SAE=500,BLOCK=MMAPVS, NI=8000; SAAII:SAE=500,BLOCK=MMAPVS, NI=8500; SAAII:SAE=500,BLOCK=MMAPVS, NI=9000; SAAII:SAE=500,BLOCK=MMAPVS, NI=9500; SAAII:SAE=500,BLOCK=MMAPVS, NI=10000;

SAAII:SAE=500,BLOCK=MMAPVS, NI=10500; SAAII:SAE=500,BLOCK=MMAPVS, NI=10695; SAAII:SAE=500,BLOCK=MSPUAP, NI=360; ! NI=41 recommended ! SAAII:SAE=500,BLOCK=MUSSPAP,NI=3000; ! NI=41 recommended ! !SAAII:SAE=500,BLOCK=MSECAP, NI=0; !! NI=238 recommended ! SAAII:SAE=500,BLOCK=MSECAP3,NI=500; SAAII:SAE=500,BLOCK=MSECAP3,NI=632; SAAII:SAE=500,BLOCK=MZONE, NI=582; ! NI=228 recommended ! SAAII:SAE=604,BLOCK=MZONE, NI=100; ! NI=300 recommended ! SAAII:SAE=603,BLOCK=MTVZONE,NI=37000; ! NI = SAE=036 ! SAAII:SAE=602,BLOCK=MTVCF, NI=3000; ! NI = SAE=603 Block==mtvcf ! SAAII:SAE=603,BLOCK=MTVCF, NI=96000; ! NI = SAE=36 x3x100x5/16 ! SAAII:SAE=602,BLOCK=MCVLRD, NI=20; ! # of LAIs per coop VLR !

SAAII:SAE=603,BLOCK=MCVLRD, NI=100; ! NI=100 recommended ! SAAII:SAE=602,BLOCK=MTVCUG, NI=2032; ! NI = SAE=36 x13/16 CUG not ! ! normally used ! SAAII:SAE=603,BLOCK=MTVCUG, NI=2500; ! NI = SAE=36 x100 CUG not normally ! ! used ! SAAII:SAE=504,BLOCK=MRNR, NI=5; ! # of MRNR routes replace MRNR1 in ! ! R9.1 ! SAAII:SAE=504,BLOCK=MRNR, NI=10; SAAII:SAE=504,BLOCK=MRNR, NI=15; SAAII:SAE=504,BLOCK=MRNR, NI=20; SAAII:SAE=504,BLOCK=MRNR, NI=21; SAAII:SAE=571,BLOCK=MTRIP, NI=3000; ! SECOND TRIPLET. NI=SAE-36 ! SAAII:SAE=572,BLOCK=MTRIP, NI=3000; ! THIRD TRIPLET. NI=SAE-36 ! SAAII:SAE=573,BLOCK=MTRIP, NI=3000; ! FOURTH TRIPLET. NI=SAE-36 ! !SAAII:SAE=574,BLOCK=MTRIP, NI=0; !! FIFTH TRIPLET. NI=SAE-36 ! !SAAII:SAE=575,BLOCK=MTRIP, NI=0; !! SIXTH TRIPLET. NI=SAE-36 ! !SAAII:SAE=576,BLOCK=MTRIP, NI=0; !! SEVENTH TRIPLET.NI=SAE-36 ! !SAAII:SAE=577,BLOCK=MTRIP, NI=0; !! EIGTH TRIPLET. NI=SAE-36 ! !SAAII:SAE=578,BLOCK=MTRIP, NI=0; !! NINTH TRIPLET. NI=SAE-36 ! !SAAII:SAE=579,BLOCK=MTRIP, NI=0; !! TENTH TRIPLET. NI=SAE-36 ! SAAII:SAE=602,BLOCK=MTVLCS, NI=65500; ! sub-related for LCS ! SAAII:SAE=603,BLOCK=MTVLCS, NI=37000; ! sub-related for PLMN ! SAAII:SAE=629,BLOCK=MTVLCS, NI=65536; ! sub-related for GMLC ! SAAII:SAE=630,BLOCK=MTVLCS, NI=59000; ! sub-related for Ext. Client ! SAAII:SAE=500,BLOCK=MVIPH, NI=3801; ! request - MS data sent to VLR !

!SAAII:SAE=500,BLOCK=MCVLRD, NI=0; !! data for the Proxy Table (MGPTI ! ! command) ! !SAAII:SAE=629,BLOCK=MCVLRD, NI=0; !! the cooperating VLRs belonging to !


31/781

! the MSC Pool serving the LAIs ! ! (MGCVI command) ! !SAAII:SAE=630,BLOCK=MCVLRD, NI=0; !! the NRI values associated to each ! ! cooperating VLR, defined for a ! ! LAI, belonging to the MSC Pool ! ! serving the location areas ! ! identified by their LAI !

SAAII:SAE=500,BLOCK=MNMMAP, NI=734; ! MNMMAP block notificates Mobility ! ! Management (MM) events towards ! ! gsmSCF through the "NoteMM-event" ! ! operation for Mobile Application ! ! Part (MAP) Version 3. Block ! ! MNMMAP SAE 500 is for number of ! ! MAP operations "noteMM-event". ! !SAAII:SAE=631,BLOCK=MTVLCS, NI=0; !! External LCS Client list data ! ! related to LCS data for visiting ! ! mobile subscribers belonging to ! ! call related privacy class. ! !SAAII:SAE=632,BLOCK=MTVLCS, NI=0; !! SAE 632 is subscriber-related. It !

! stores Service Type list data ! ! related to LCS data for visiting ! ! mobile subscribers belonging to ! ! service type privacy class. ! !SAAII:SAE=633,BLOCK=MTVLCS, NI=0; !! SAE 633 is subscriber-related. It ! ! stores Spatial Triggers Event ! ! data for visiting mobile ! ! subscribers ! !SAAII:SAE=630,BLOCK=MTVIN, NI=0; !! not used in R10 ! !SAAII:SAE=631,BLOCK=MTVIN, NI=0; !! data related to M-CSI for ! ! visiting mobile subscribers. ! !SAAII:SAE=632,BLOCK=MTVIN, NI=0; !! data related to D-CSI for ! ! visiting mobile subscribers. !

!SAAII:SAE=633,BLOCK=MTVIN, NI=0; !! data related to VT-CSI for ! ! visiting mobile subscribers. ! !SAAII:SAE=1141, NI=0; !! Block=MTRAN data for neighbouring ! ! Mobile Services Switching Centre ! ! Groups (MSCGs). Command MGMGI. ! SAAII:SAE=500,BLOCK=MPSIH, NI=60; ! MPSIH initiates the paging of a ! ! subscriber when requested. In ! ! addition it fetches the active ! ! location of a subscriber and ! ! provides it to the requesting ! ! block. SAE 500 is ! ! traffic-sensitive. Block MPSIH ! ! uses SAE 500 to store data needed ! ! to perform the paging of the ! ! subscriber.One individual is ! ! seized whenever the paging of the ! ! subscriber is requested and this ! ! individual is released when the ! ! paging operation is completed. !

!N13!SAAII:SAE=500,BLOCK=MREPR, NI=0 ;!N13!SAAII:SAE=500,BLOCK=MREPS, NI=0 ;!N13!SAAII:SAE=500,BLOCK=MRESIAP, NI=0 ;!N13!SAAII:SAE=501,BLOCK=MRESIAP, NI=0 ;

!+-------+! !+ MMS +! !+-------+!


32/781

!SAAII:SAE=504,BLOCK=MALNA51,NI=0; !! # OF MALNA51 routes (AXE810,ET155)! SAAII:SAE=285, NI=40;!C12!SAAII:SAE=500,BLOCK=MAUTH, NI=5732 ! # of inds. NI=100 recommend ! ! Maximum step size increase No limit! SAAII:SAE=500,BLOCK=MSCCO, NI=32000; ! NI= SAE 500 Block==mrrm !

SAAII:SAE=500,BLOCK=MECAP, NI=429; ! NI=250 recommended !!C12!SAAII:SAE=500,BLOCK=MHOMH, NI=341; ! NI=100 recommended ! ! Maximum step size increase No limit! SAAII:SAE=500,BLOCK=MHO, NI=500; ! NI=200 recommended ! SAAII:SAE=500,BLOCK=MHO, NI=810;!N12!SAAII:SAE=500,BLOCK=MHOCOIP,NI=177; ! NI=200 recommended ! ! LOAD BASED INTER-SYSTEM HANDOVERS (FAJ 121 751/1)!!N12!SAAII:SAE=500,BLOCK=MHICOIP,NI=177; ! NI=200 recommended ! ! LOAD BASED INTER-SYSTEM HANDOVERS (FAJ 121 751/1)!

!N12!SAAII:SAE=500,BLOCK=MUHOC, NI=46; !set up, supervise, and disconnect ! !a transaction in a anchor MSC/VLR Server. !!N12!SAAII:SAE=500,BLOCK=MUHIC, NI=46; !inter-MSC SRNS relocation procedures!!N12!SAAII:SAE=500,BLOCK=MUAMH, NI=2960; ! LOAD BASED INTER-SYSTEM HANDOVERS (FAJ 121 751/1)! SAAII:SAE=500,BLOCK=MHIC, NI=500; ! NI=100 recommended ! SAAII:SAE=500,BLOCK=MHIC, NI=1000; SAAII:SAE=500,BLOCK=MHIC, NI=1500; SAAII:SAE=500,BLOCK=MHIC, NI=2000; SAAII:SAE=500,BLOCK=MHIC, NI=2500;

SAAII:SAE=500,BLOCK=MHIC, NI=3000; !SAAII:SAE=500,BLOCK=MHOAAP, NI=0; !! # of outgoing handover MAP ! ! dialogue from an anchor MSC ! ! Server to a non-anchor MSC Server ! ! using MAP Version 1. ! SAAII:SAE=500,BLOCK=MHOAAP2,NI=500; ! # of outgoing handover MAP ! ! dialogue from an anchor MSC ! ! Server to a non-anchor MSC Server ! ! using MAP Version 2. ! SAAII:SAE=500,BLOCK=MHOAAP2,NI=523; SAAII:SAE=500,BLOCK=MHOAAP3,NI=500; ! # of outgoing handover MAP ! ! dialogue from an anchor MSC ! ! Server to a non-anchor MSC Server ! ! using MAP Version 3. ! SAAII:SAE=500,BLOCK=MHOAAP3,NI=1000; SAAII:SAE=500,BLOCK=MHOAAP3,NI=1500; SAAII:SAE=500,BLOCK=MHOAAP3,NI=2000; SAAII:SAE=500,BLOCK=MHOAAP3,NI=2500; SAAII:SAE=500,BLOCK=MHOAAP3,NI=3000; !SAAII:SAE=500,BLOCK=MHONAP, NI=0; !! # of non-anchor MSC Server ! ! dialogue for incoming hand-over ! ! using MAP Version 1. ! SAAII:SAE=500,BLOCK=MHONAP2,NI=500; ! # of non-anchor MSC Server ! ! dialogue for incoming hand-over ! ! using MAP Version 2. !

SAAII:SAE=500,BLOCK=MHONAP2,NI=573; SAAII:SAE=500,BLOCK=MHONAP3,NI=500; ! # of non-anchor MSC Server ! ! dialogue for incoming hand-over !


33/781

! using MAP Version 3. ! SAAII:SAE=500,BLOCK=MHONAP3,NI=1000; SAAII:SAE=500,BLOCK=MHONAP3,NI=1500; SAAII:SAE=500,BLOCK=MHONAP3,NI=2000; SAAII:SAE=500,BLOCK=MHONAP3,NI=2500; SAAII:SAE=500,BLOCK=MHONAP3,NI=3000;!C12!SAAII:SAE=1139, NI=50000; ! Maximum step size increase No limit

! !SAAII:SAE=500,BLOCK=MUEP, NI=0; !! # of unsent Error Indication ! ! messages. ! !SAAII:SAE=500,BLOCK=MUIUCM, NI=0; !! # of software devices at the ! ! MSC/VLR Server-RNC interface ! !SAAII:SAE=500,BLOCK=MUREL, NI=0; !! # of SRNS relocation or UMTS to ! ! GSM handover !!N12!SAAII:SAE=500,BLOCK=MUSCCO, NI=0; !! # of connection-oriented message ! ! between the MSC/VLR Server and a ! ! RNC ! ! LOAD BASED INTER-SYSTEM HANDOVERS (FAJ 121 751/1)!

!SAAII:SAE=500,BLOCK=MUSCCL, NI=0; !! # of connectionless message ! ! between the MSC/VLR Server and a ! ! RNC ! SAAII:SAE=504,BLOCK=MHOC, NI=30; ! # of MHOC routes ! SAAII:SAE=504,BLOCK=MALTC, NI=240; ! total # of MALT routes ! !SAAII:SAE=504,BLOCK=MALT4, NI=0; !! # of MALT4 routes (202 HW) ! !SAAII:SAE=504,BLOCK=MALTM, NI=0; !! # of MALTM routes (501 HW) ! !SAAII:SAE=504,BLOCK=MUIUCM, NI=0; !! # of route individuals ! SAAII:SAE=513,BLOCK=MLABT, NI=150; ! # of modules in CIC trans. ! SAAII:SAE=527,BLOCK=MLABT, NI=100; ! NI = SAE 513 Block= mlabt ! SAAII:SAE=527,BLOCK=MRRMH, NI=500; ! SAE 500 Block= mrrmh /10 ! SAAII:SAE=527,BLOCK=MRRMH, NI=1000; SAAII:SAE=527,BLOCK=MRRMH, NI=1500;

SAAII:SAE=527,BLOCK=MRRMH, NI=2000; SAAII:SAE=527,BLOCK=MRRMH, NI=2500; SAAII:SAE=527,BLOCK=MRRMH, NI=3000; SAAII:SAE=527,BLOCK=MRRMH, NI=3500; SAAII:SAE=527,BLOCK=MRRMH, NI=4000; SAAII:SAE=527,BLOCK=MRRMH, NI=4500; SAAII:SAE=527,BLOCK=MRRMH, NI=5000; SAAII:SAE=527,BLOCK=MRRMH, NI=5500; SAAII:SAE=527,BLOCK=MRRMH, NI=6000; SAAII:SAE=527,BLOCK=MRRMH, NI=6500; SAAII:SAE=527,BLOCK=MRRMH, NI=7000; SAAII:SAE=527,BLOCK=MRRMH, NI=7500; SAAII:SAE=527,BLOCK=MRRMH, NI=8000; SAAII:SAE=527,BLOCK=MRRMH, NI=8500; SAAII:SAE=527,BLOCK=MRRMH, NI=9000; SAAII:SAE=527,BLOCK=MRRMH, NI=9500; SAAII:SAE=527,BLOCK=MRRMH, NI=10000; SAAII:SAE=527,BLOCK=MRRMH, NI=10500; SAAII:SAE=527,BLOCK=MRRMH, NI=11000; SAAII:SAE=527,BLOCK=MRRMH, NI=11500; SAAII:SAE=527,BLOCK=MRRMH, NI=12000; SAAII:SAE=527,BLOCK=MRRMH, NI=12500; SAAII:SAE=527,BLOCK=MRRMH, NI=13000; SAAII:SAE=527,BLOCK=MRRMH, NI=13500; SAAII:SAE=527,BLOCK=MRRMH, NI=14000;

SAAII:SAE=527,BLOCK=MRRMH, NI=14500; SAAII:SAE=527,BLOCK=MRRMH, NI=15000; SAAII:SAE=527,BLOCK=MRRMH, NI=15500;


34/781


35/781

SAAII:SAE=1053, NI=4000; SAAII:SAE=1053, NI=4500; SAAII:SAE=1053, NI=5000; SAAII:SAE=1053, NI=5500; SAAII:SAE=1053, NI=6000; SAAII:SAE=1053, NI=6500; SAAII:SAE=1053, NI=7000;

SAAII:SAE=1053, NI=7500; SAAII:SAE=1053, NI=8000; SAAII:SAE=1053, NI=8500; SAAII:SAE=1053, NI=9000; SAAII:SAE=1053, NI=9500; SAAII:SAE=1053, NI=10000; SAAII:SAE=1053, NI=10500; SAAII:SAE=1053, NI=11000; SAAII:SAE=1053, NI=11500; SAAII:SAE=1053, NI=12000; SAAII:SAE=1053, NI=12500; SAAII:SAE=1053, NI=13000;

SAAII:SAE=1053, NI=13500; SAAII:SAE=1053, NI=14000; SAAII:SAE=1053, NI=14500; SAAII:SAE=1053, NI=15000; SAAII:SAE=1053, NI=15500; SAAII:SAE=1053, NI=16000; SAAII:SAE=1053, NI=16500; SAAII:SAE=1053, NI=17000; SAAII:SAE=1053, NI=17500; SAAII:SAE=1053, NI=18000; SAAII:SAE=1053, NI=18500; SAAII:SAE=1053, NI=19000; SAAII:SAE=1053, NI=19500;

SAAII:SAE=1053, NI=20000; SAAII:SAE=1053, NI=20500; SAAII:SAE=1053, NI=21000; SAAII:SAE=1053, NI=21500; SAAII:SAE=1053, NI=22000; SAAII:SAE=1053, NI=22500; SAAII:SAE=1053, NI=23000; SAAII:SAE=1053, NI=23500; SAAII:SAE=1053, NI=24000; SAAII:SAE=1053, NI=24500; SAAII:SAE=1053, NI=25000; SAAII:SAE=1053, NI=25500; SAAII:SAE=1053, NI=26000; SAAII:SAE=1053, NI=26500; SAAII:SAE=1053, NI=27000; SAAII:SAE=1053, NI=27500; SAAII:SAE=1053, NI=28000; SAAII:SAE=1053, NI=28500; SAAII:SAE=1053, NI=29000; SAAII:SAE=1053, NI=29500; SAAII:SAE=1053, NI=30000; SAAII:SAE=1053, NI=30500; SAAII:SAE=1053, NI=31000; SAAII:SAE=1053, NI=31500; SAAII:SAE=1053, NI=32000;

SAAII:SAE=1053, NI=32500; SAAII:SAE=1053, NI=33000; SAAII:SAE=1053, NI=33500;


36/781


! GPRS !

SAAII:SAE=500,BLOCK=MGMH, NI=675;

!------------------------------------------------------------! ! Size alteration event for EXT.min: 1 ! ! number of max: 65535 ! ! individuals. RED.min: 1 ! ! max: 65535 ! ! Block MGMH stores message data for packing and unpacking ! ! of BSSAP+ messages in SAE 500 (GPRS) ! !------------------------------------------------------------!

SAAII:SAE=500,BLOCK=MGPRO, NI=675;

!------------------------------------------------------------! ! Size alteration event for EXT.min: 1 ! ! number of max: 65535 ! ! individuals RED.min: 1 ! ! max: 65535 ! ! The max. size to store data to support all procedures ! ! within Gs interface. ! ! Block MGPRO uses SAE 500 to support all procedures between ! ! the Serving GPRS Support Node (SGSN) and (MSC/VLR). ! !------------------------------------------------------------!

SAAII:SAE=500,BLOCK=MGSIF, NI=675; ! Block MGSIF receives ! ! connectionless message data !

! coming from the Servicing GPRS ! ! Support Node (SGSN) and stores ! ! its address data to seized SAE ! ! individual. The address data is ! ! needed when the same individual ! ! sends message back to SGSN !

! remote A-interface lines !

SAAII:SAE=500,BLOCK=MRALTM, NI=21168; ! information about remote ! ! A-interface lines ! SAAII:SAE=504,BLOCK=MRALTM, NI=240; ! One record is used per route to ! ! store route and ! ! signalling-related data !

!+-------+! !+ MSS +! !+-------+!

SAAII:SAE=436, NI=500; ! MCCMH Call Control transactions ! ! for mobile-originating ! ! /mobile-terminating call ! SAAII:SAE=436, NI=1000; SAAII:SAE=436, NI=1500; SAAII:SAE=436, NI=2000;



37/781

SAAII:SAE=436, NI=4000; SAAII:SAE=436, NI=4500; SAAII:SAE=436, NI=5000; SAAII:SAE=436, NI=5500; SAAII:SAE=436, NI=6000; SAAII:SAE=436, NI=6500; SAAII:SAE=436, NI=7000;

SAAII:SAE=436, NI=7500; SAAII:SAE=436, NI=8000; SAAII:SAE=436, NI=8500; SAAII:SAE=436, NI=9000; SAAII:SAE=436, NI=9500; SAAII:SAE=436, NI=10000; SAAII:SAE=436, NI=10500; SAAII:SAE=436, NI=11000; SAAII:SAE=436, NI=11500; SAAII:SAE=436, NI=12000; SAAII:SAE=436, NI=12500; SAAII:SAE=436, NI=13000;

SAAII:SAE=436, NI=13500; SAAII:SAE=436, NI=14000; SAAII:SAE=436, NI=14500; SAAII:SAE=436, NI=15000; SAAII:SAE=436, NI=15500; SAAII:SAE=436, NI=16000; SAAII:SAE=436, NI=16500; SAAII:SAE=436, NI=17000; SAAII:SAE=436, NI=17500; SAAII:SAE=436, NI=18000; SAAII:SAE=436, NI=18500; SAAII:SAE=436, NI=19000; SAAII:SAE=436, NI=19500;

SAAII:SAE=436, NI=20000; SAAII:SAE=436, NI=20500; SAAII:SAE=436, NI=21000; SAAII:SAE=436, NI=21500; SAAII:SAE=436, NI=22000; SAAII:SAE=436, NI=22500; SAAII:SAE=436, NI=23000; SAAII:SAE=436, NI=23500; SAAII:SAE=436, NI=24000; SAAII:SAE=436, NI=24500; SAAII:SAE=436, NI=25000; SAAII:SAE=436, NI=25500; SAAII:SAE=436, NI=26000; SAAII:SAE=436, NI=26500; SAAII:SAE=436, NI=27000; SAAII:SAE=436, NI=27500; SAAII:SAE=436, NI=28000; SAAII:SAE=436, NI=28500; SAAII:SAE=436, NI=29000; SAAII:SAE=436, NI=29500; SAAII:SAE=436, NI=29968; SAAII:SAE=488, NI=2000; ! Block=MTACC, NO MAX STEP IN R9 ! SAAII:SAE=488, NI=4000; SAAII:SAE=488, NI=6000; SAAII:SAE=488, NI=8000;



38/781

SAAII:SAE=488, NI=16000; SAAII:SAE=488, NI=18000; SAAII:SAE=488, NI=20000; SAAII:SAE=493, NI=2000; ! Block=mtb mobile-terminating call ! ! MAX step = 2000 ! SAAII:SAE=493, NI=4000; SAAII:SAE=493, NI=6000;

SAAII:SAE=493, NI=8000; SAAII:SAE=493, NI=10000; SAAII:SAE=493, NI=12000; SAAII:SAE=493, NI=12025; !SAAII:SAE=500,BLOCK=GAP, NI=0; !! SAE = SAE500 Block==gri ! SAAII:SAE=500,BLOCK=GAP3, NI=500; ! Number of active MAPV3 ! SAAII:SAE=500,BLOCK=GAP3, NI=1000; SAAII:SAE=500,BLOCK=GAP3, NI=1500; SAAII:SAE=500,BLOCK=GAP3, NI=1511; SAAII:SAE=500,BLOCK=MCLMTH, NI=2785; ! messages via the CLMTSE. ! SAAII:SAE=500,BLOCK=MUAACCT,NI=100; ! TR=(NACR*HT/3600)*Nv*RH ! ! TR=(0.05*5/3600)*300000*1.2 =24.98!

SAAII:SAE=500,BLOCK=GMAPVS, NI=500; SAAII:SAE=500,BLOCK=GMAPVS, NI=1000; SAAII:SAE=500,BLOCK=GMAPVS, NI=1500; SAAII:SAE=500,BLOCK=GMAPVS, NI=1585;!C12!SAAII:SAE=500,BLOCK=MCCC, NI=1090; ! SAE= SAE=500 Block=-ccd ! ! Maximum step size increase No limit! SAAII:SAE=504,BLOCK=GRI, NI=10; ! # of GRI routes ! SAAII:SAE=527,BLOCK=MCPPH, NI=500; ! NI=330 recommended ! SAAII:SAE=527,BLOCK=MCPPH, NI=1000; SAAII:SAE=527,BLOCK=MCPPH, NI=1500; SAAII:SAE=527,BLOCK=MCPPH, NI=1675; SAAII:SAE=527,BLOCK=MCCMH, NI=500; ! DTAP messages for call-related !

! supplementary services or for ! ! call control. NI=330 recommended ! SAAII:SAE=527,BLOCK=MCCMH, NI=1000; SAAII:SAE=527,BLOCK=MCCMH, NI=1500; SAAII:SAE=527,BLOCK=MCCMH, NI=2000; SAAII:SAE=527,BLOCK=MCCMH, NI=2500; SAAII:SAE=527,BLOCK=MCCMH, NI=3000; SAAII:SAE=527,BLOCK=MCCMH, NI=3500; SAAII:SAE=527,BLOCK=MCCMH, NI=3551; !SAAII:SAE=504,BLOCK=MCRRD, NI=0; !! # of ESRK for E911 in MSC. ! SAAII:SAE=500,BLOCK=MCEDHC, NI=500; ! # of charged mobile calls. SAE, ! ! CMS40 XSS ! SAAII:SAE=500,BLOCK=MCEDHC, NI=1000; SAAII:SAE=500,BLOCK=MCEDHC, NI=1500; SAAII:SAE=500,BLOCK=MCEDHC, NI=2000; SAAII:SAE=500,BLOCK=MCEDHC, NI=2500; SAAII:SAE=500,BLOCK=MCEDHC, NI=3000; SAAII:SAE=500,BLOCK=MCEDHC, NI=3500; SAAII:SAE=500,BLOCK=MCEDHC, NI=4000; SAAII:SAE=500,BLOCK=MCEDHC, NI=4500; SAAII:SAE=500,BLOCK=MCEDHC, NI=5000; SAAII:SAE=500,BLOCK=MCEDHC, NI=5500; SAAII:SAE=500,BLOCK=MCEDHC, NI=6000; SAAII:SAE=500,BLOCK=MCEDHC, NI=6500; SAAII:SAE=500,BLOCK=MCEDHC, NI=7000;

SAAII:SAE=500,BLOCK=MCEDHC, NI=7500; SAAII:SAE=500,BLOCK=MCEDHC, NI=8000; SAAII:SAE=500,BLOCK=MCEDHC, NI=8500;


39/781

SAAII:SAE=500,BLOCK=MCEDHC, NI=9000; SAAII:SAE=500,BLOCK=MCEDHC, NI=9500; SAAII:SAE=500,BLOCK=MCEDHC, NI=10000; SAAII:SAE=500,BLOCK=MCEDHC, NI=10500; SAAII:SAE=500,BLOCK=MCEDHC, NI=11000; SAAII:SAE=500,BLOCK=MCEDHC, NI=11500; SAAII:SAE=500,BLOCK=MCEDHC, NI=12000;

SAAII:SAE=500,BLOCK=MCEDHC, NI=12500; SAAII:SAE=500,BLOCK=MCEDHC, NI=13000; SAAII:SAE=500,BLOCK=MCEDHC, NI=13500; SAA

Data Transcript Example for Msc Server R13.2

Documents

Transcript of Data Transcript Example for Msc Server R13.2