1/1

DATA SHEET GIP LED extrusion – article number B4574

Customer Service: sophia@klusdesign.com / (Ph.) 772 321 2260, 772 569 6655

Product characteristics The extrusion is made from high quality, double-anodized aluminum, designed for a maximum of two flexible or rigid LED strips that are 8 - 10 mm wide. LEDs can be hidden behind a cover in the semicircular shape G-L or square shape G-K, made of polymethyl methacrylate. Standard polypropylene end caps are used for the extrusion as supplementary accessories. End caps protect the extrusion from dust and other undesirable elements, which can make LED strips dirty and consequently deteriorate the lighting parameters. The extrusion can be mounted to surfaces with the use of double-sided adhesive tape, mounting glue or screws which guarantee easy and secure mounting of the extrusion to a desired surface. Installation of the profile in drywall is performed using special GP mounting springs. If you would like to mount a profile in an Armstrong drop ceiling with the use of GP springs, then safety washers (42712) are recommended. Additionally, it can be mounted in the TEKNIK profile, using dedicated fasteners (we recommend three pairs per meter of the profile). The TEKNIK profile allows for the construction of precise slots (grooves) in the surfaces of walls and drywall ceilings. ZM connectors are used for straight (ZM-180) and angle connections of KLUŚ profiles fitted with a small fastener and to stabilize the ends of the profiles mounted in lines. (in a plane parallel to the cover, at an angle of 90

O and 135

O - ZM-90 and ZM-135, as well

as in a plane perpendicular to the cover at the angle of 90O and 135

O - ZMPION-90 and ZMPION-135)

For mounting and power supply of extrusions, the elements from the mounting system can be used together with the optional accessories presented on www.KlusDesign.com.

Applications The architectural extrusion with the LED light source is ideal for creating light illuminations indoors. The possibility of getting a single line of light, thanks to a frosted cover, makes this extrusion fit all kinds of arrangements. Due to the possibility of installing two strips inside the extrusion, it can be used as a primary, energy-efficient light source. Products related to the Extrusion extrusion TEKNIK (B5555) ½” drywall TEKUS (B6638) 5/8” drywall

cover type G - L frosted (00413) clear matte (17008)

clear (17006) cover type G - K clear matte (00415) frosted (17007)

end cap GIP - L without hole (00306)

end cap GIP - L without hole (00307)

TEKNIK clip (24003)

spring GP (00293) washer (42712) mounting Bracket (24143) Adjustable mounting bracket (24155)

2/1

DATA SHEET GIP LED extrusion – article number B4574

Customer Service: sophia@klusdesign.com / (Ph.) 772 321 2260, 772 569 6655

Technical specification Ingress Protection Rating IP 20

Product Number B4574_1 (34.9”)

B4574_2 (78.7”)

Material body – aluminum, cover – poly (methyl methacrylate) – PMMA,

end cap – polypropylene (PP), latch – polyoxymethylene (POM), spring, connector – steel

**sample item from the mounting system of profiles

2501 27th Ave, Suite F-10, Vero Beach, FL 32960 / United States / Customer Service: sophia@klusdesign.com / (Ph.) 772 321 2260, 772 569 6655

We reserve the right to change and modify our products.www.KlusDesign.comMade in USA

12V or 24V

120 AC

12V or 24V

120 AC

GIP Extrusion

LED strip

GIL End Cap

Wiring diagram

Basic fixture components

GIL End Cap

LED fixture

G-L Cover

Mounting Instruction

2501 27th Ave, Suite F-10, Vero Beach, FL 32960 / United States / Customer Service: sophia@klusdesign.com / (Ph.) 772 321 2260, 772 569 6655

We reserve the right to change and modify our products.www.KlusDesign.com

Mounting of the GIP extrusion to a surface (drywall, wood etc) with the use of GP surface mounting springs.

1. 2.

3.

ø 0.39”(ø 10 mm)

12 V or 24V

120 AC

*�xture cableoptions

GP surface spring

4. 5.

12,5

mm

(0.4

9”)a.

b.

Mounting Instruction

2501 27th Ave, Suite F-10, Vero Beach, FL 32960 / United States / Customer Service: sophia@klusdesign.com / (Ph.) 772 321 2260, 772 569 6655

We reserve the right to change and modify our products.www.KlusDesign.com

Mounting the GIP extrusion to a drop ceiling with the use of GP mounting springs.

GP surface spring

plastic base

a.

b.

plastic base

1. 2.

3.

ø 0.39”(ø 10 mm)

12 V or 24V

120 AC

4. 5.

*�xture cableoptions

Mounting Instruction

2501 27th Ave, Suite F-10, Vero Beach, FL 32960 / United States / Customer Service: sophia@klusdesign.com / (Ph.) 772 321 2260, 772 569 6655

We reserve the right to change and modify our products.www.KlusDesign.com

Mounting the GIP extrusion to drywall with the use of the TEKNIK mounting extrusion.

1.

2.

3.

mounting the profile TEKNIK with the support structure of the ceiling

to power supply

*�xture cable options

TEKNIK clip

3 pairs of TEKNIK clips per 1 meter

a.

b.

Female end

Male end

Wire end

Fixture cable options

2501 27th Ave, Suite F-10, Vero Beach, FL 32960 / United States / Customer Service: sophia@klusdesign.com / (Ph.) 772 321 2260, 772 569 6655

We reserve the right to change and modify our products.www.KlusDesign.com

36F

72F

36”

72”

36F

72F

36”

72”

36

72

36”

72”

to powersupply

female end

male end

*Examples of attaching a KLUS fixture to the power supply

A B Cto powersupply

to powersupply

male end

female end

custom connection