DATA SHEET D4166 Plug and play cabling, FPM MPO series• Strain relief for the MPO-cables •...
Transcript of DATA SHEET D4166 Plug and play cabling, FPM MPO series• Strain relief for the MPO-cables •...
-
DATA SHEET DB4166-E Issue L Page 1 of 4
fossfibreoptics.com
Capacities The module is delivered with a front for 24 LC-connectors, and room for 2 MPO connectors in the back. The modules are plugged into a 1U panel (3 modules) or a 3U panel (12 modules).
Trunk cable and fan-out Trunk cables and fan-out cables for indoor use are delivered with 12 or 24 optical fibres. Trunk cables are delivered with MPO in both ends. Fan-outs are used as converters between MPO and LC.
Modular system for LC to MPO-conversion in 1U and 3U panels. • 3 modules in 1U panels or 12 modules in 3U panels • LC on the front • MPO12(M) or MPO24(M) in the back • White aluminium • MPO12(F)-MPO12(F) trunk cables • MPO24(F)-MPO24(F) trunk cables • MPO(F)-LC fan-out cables • Single mode, multimode 50/125 OM-3 and OM-4
Plug and play cabling, FPM MPO-series
Panel size 1U 44H x 19” x 240D
3U 133H x 19” x 240D
Capacity module 24 LC
Total capacity 72/288 LC 1U/3U panel
Area of use Indoor cabling 12/24 fibre
Fibre type and cable colour Single mode ITU-T G.657A1 Yellow
Multimode OM-3 Aqua
Multimode OM-4 Violet
Outer diameter 12/24 fibre cable 3.0/3.8 mm (indoor), 4.5/5.4 (dual indoor), 5.0/5.8 (in/outdoor)
Trunk cable
2.0 mm (LC-part), 3.0/3.8 mm (main part) Fan-out
Temperature range -10 oC to 60 oC at installation and operation
Fire class cable Cca-s1a, d1, a2 for 12-fibre, Cca-s1a, d1, a1 for 24-fibre
-
DATA SHEET DB4166-E Issue L Page 2 of 4
fossfibreoptics.com
Optical specification
Wall box with MPO MPO may also be delivered in Wall box DIN MINI, see separate data sheet DB4177-E for details about the box. Example article number:
FPD66-12LCxOM3-MPO-z Wall box DIN MINI, 12xLC-1x12 MPOM OM3, z
All equivalent variants (12 and 24-fiber) as listed for FPM76 on next page may be delivered.
Back plate A separate back plate may be mounted on the back of both 1U and 3U panels. This have two main functions: • Strain relief for the MPO-cables • Enables extra cable length so the MPO modules may be taken out from
the front
Insertion loss Return loss
LC to MPO-panel
Single mode G.657.A1 < 1.0 dB at 1310/1550 nm < 1.15 dB at 1310/1550 nm
< -50dB < -50dB
12-fibre MPO 24-fibre MPO
Multimode OM-3 and OM-4 < 1.0 dB at 850/1300 nm
Trunk cables MPO
Single mode G.657.A1 < 0.5 dB at 1310/1550 nm < 0.65 dB at 1310/1550 nm
< -60dB < -60dB
12-fibre MPO 24-fibre MPO
Multimode OM-3 and OM-4 < 0.5 dB at 850/1300 nm
Fan-Out
Single mode G.657.A1 < 0.5 dB at 1310/1550 nm < 0.65 dB at 1310/1550 nm
< -60dB < -60dB
12-fibre MPO 24-fibre MPO
< 0.5 dB at 1310/1550 nm < -50dB LC/PC
Multimode OM-3 and OM-4 < 0.5 dB at 850/1300 nm MPO
< 0.5 dB at 850/1300 nm LC
-
DATA SHEET DB4166-E Issue L Page 3 of 4
fossfibreoptics.com
1.0 m patch
Fan-out
Total length: 2.0 m
Article numbers MPO modul
FPM76-12SLC-MPOA-z Modul, 12 LC/PC-MPOAM, 9/OS2, z
FPM75-24SLC-MPOA-z Modul, 24 LC/PC-MPOAM, 9/OS2, z
FPM76-24SLC-2MPOA-z Modul, 24 LC/PC-2x12 MPOAM, 9/OS2, z
FPM76-12SLCA-MPOA-z Modul, 12 LC/APC-MPOAM, 9/OS2, z
FPM76-24SLCA-MPOA-z Modul, 24 LC/APC-MPOAM, 9/OS2, z
FPM76-24SLCA-2xMPOA-z Modul, 24 LC/APC-2x12 MPOAM, 9/OS2, z
FPM76-12LCOM3-MPO-z Modul, 12LC-MPOM, 50/OM3, z
FPM76-24LCOM3-MPO-z Modul, 24LC-MPOM, 50/OM3, z
FPM76-24LCOM3-2MPO-z Modul, 24LC-2x12 MPOM, 50/OM3, z
FPM76-12LCOM4-MPO-z Modul, 12LC-MPOM, 50/OM4, z
FPM76-24LCOM4-MPO-z Modul, 24LC-MPOM, 50/OM4, z
FPM76-48LCOM4-2MPO-z Modul, 48LC-2x24MPOM, 50/OM4, z
Trunk cables
8-AyRR-xxxx-z Cable, 12xOS2 y MPOAF-MPOAF, xxx.x m, z
8-ByRR-xxxx-z Cable, 24xOS2 y MPOAF-MPOAF, xxx.x m, z
8-CyRR-xxxx-z Cable, 12xOM3 y MPOF-MPOF, xxx.x m, z
8-DyRR-xxxx-z Cable, 24xOM3 y MPOF-MPOF, xxx.x m, z
8-EyRR-xxxx-z Cable, 12xOM4 y MPOF-MPOF, xxx.x m, z
8-FyRR-xxxx-z Cable, 24xOM4 y MPOF-MPOF, xxx.x m, z
Fan-out
8-AIRL-10-020 Fan-Out, 12xOS2 I/P MPOAF-LC/PC, 1.0+1.0 m
8-BIRL-10-020 Fan-Out, 24xOS2 I/P MPOAF-LC/PC, 1.0+1.0 m
8-CIRL-10-020 Fan-Out, 12xOM3 I/P MPOF-LC, 1.0+1.0 m
8-DIRL-10-020 Fan-Out, 24xOM3 I/P MPOF-LC, 1.0+1.0 m
8-EIRL-10-020 Fan-Out, 12xOM4 I/P MPOF-LC, 1.0+1.0 m
8-FIRL-10-020 Fan-Out, 24xOM4 I/P MPOF-LC, 1.0+1.0 m
Direct cables 40G
8-EIRR-xxxx-B Cable, 12xOM4 I/P MPOF-MPOF, xxx.x m, B
8-CIRR-xxxx-B Cable, 12xOM3 I/P MPOF-MPOF, xxx.x m, B
8-AIRR-xxxx-B Cable, 12xOS2 I/P MPOAF-MPOAF, xxx.x m, B
Direct cables 100G
8-FIRR-xxxx-AT Cable, 24xOM4 I/P MPOF-MPOF, xxx.x m, A, TIA
8-DIRR-xxxx-AT Cable, 24xOM3 I/P MPOF-MPOF, xxx.x m, A, TIA
8-BIRR-xxxx-AT Cable, 24xOS2 I/P MPOAF-MPOAF, xxx.x m, A, TIA
Panel
FPM76100 Panel, modular, 12-slot, 3U
FPM76105 Panel, modular, 3-slot, 1U
FPM76106 Lid, 1U panel
Accessories FPM76500 Back plate, MPO
FP70331 Cover, 1U
FP70333 Cover, 3U
FP70334 Cover, 4U
FP70380 Label plate, 1U
FP70383 Label plate, 3U
FP70384 Label plate, 4U
FPM76190 Blinding plate, 1-slot
MPOAF = APC/female;
MPOF = PC/female;
MPOAM = APC/male;
MPOM = PC/male
z= polarity:
12 fibres per cable 24 fibres per cable
A or B AT or BT Cables:
A, B1 or B2 A1T, A2T, B1T or B2T
Modul:
y= cable type:
I= I/P = Indoor Patch
J = I/A = Indoor Armed
(double jacket)
K = I/O/A = In/Outdoor Armed
(double jacket)
-
DATA SHEET DB4166-E Issue L Page 4 of 4
fossfibreoptics.com
Gallery
3U panel with modules without cover 1U panel with modules, 3x24 LC, OM-4 3U panel with modules with cover
Trunk cable, MPO-MPO single mode Fan-Out, MTP-LC, multimode OM-3 Fan-Out, MTP-LC, multimode OM-4
Backside of 3U panel with MPO Cover, 1U Label plate, 1U
Label plates in a rack Label plate w labelling on the inside Back plate