Data Sheet Cryogenic Vessel T18V490

Cryogenic Vessel T18V490 Data Sheet

Dokumentnummer DOCUMENTNUMBER

10066557

Dokumentversion DOCUMENTVERSION

03

Seite PAGE

1 von 12 OF

PSP-Element WBS ELEMENT

Projektbezeichnung PROJECT DESCRIPTION

Materialnummer MATERIALNUMBER

E00357

Bearbeiter EDITOR

Geprüft CHECKED

Qualitäts-Planung QUALITY-PLANNING

Schweißtechnik WELDING ENGINEER

Genehmigung APPROVED

Abteilung / DEPT.

Datum / DATE

Name / NAME

LE_SCH_MFSP

24.05.2013

MC CAFFERY

LE_SCH_MFSP

24.05.2013

MAIER

LE_SCH_MFS

24.05.2013

EHEGARTNER

Die Linde AG behält sich für dieses Dokument alle Rechte gemäß DIN ISO 16016 vor.

Linde AG reserves all rights for this document according to DIN ISO 16016.

Linde AG – Engineering Division ZPL_DE_003 NDC/10066557/03/000

LITS

Leading International Tank Standard

Vacuum Insulated Storage Vessel

for Liquid Nitrogen, Oxygen and Argon

D = 3000 mm

H = 11514 mm

Sample: Vessel with options



10066557


03

Seite PAGE

2 von 12 OF


Table of Contents

1. General Technical Data......................................................................................................... 3

2. P&ID ..................................................................................................................................... 4

3. Valves – Instrumentation ...................................................................................................... 6

4. Connections ......................................................................................................................... 7

5. Insulation ............................................................................................................................. 9

6. Vaporizer ............................................................................................................................. 9

7. Corrosion Protection............................................................................................................. 9

8. Foundation ......................................................................................................................... 10

9. Proposal for Vessel Assembly ............................................................................................. 11

10. Documentation .................................................................................................................. 12

11. Further included in scope of basic ...................................................................................... 12

12. Miscellaneous .................................................................................................................... 12



10066557


03

Seite PAGE

3 von 12 OF


1. General Technical Data

Gryogenic Vessel Type T18V490

Design Code PED 97/23/EC

Design Pressure Inner Vessel 19,4 barg

Outer Jacket -1 barg

Design Temperature Inner Vessel -196 °C / +20 °C

Outer Jacket +50 °C

Maximum Allowable Working Pressure Inner Vessel 0 / 18 barg

Outer Jacket -1 / 0 barg

Maximum Allowable Working Temperature Inner Vessel -196 °C / +20 °C

Material Inner Vessel Stainless Steel

Outer Jacket Carbon Steel

Gross Volume 49.020 l

Ullage (Voidage) 5%

Net Volume 46.540 l

Weight Empty (± 10%) 17.570 kg

Weight Filling (Medium at 0 barg Equilibrium)

LIN 37.630 kg

LOX 53.180 kg

LAR 64.965 kg

Boil-Off Rate

LIN 0,21 %/d

LOX 0,13 %/d

LAR 0,15 %/d

Discharge Capacity (For 8h continuous Operation, 20 °C ambient Temperature with standard pres-

sure building coil at 0,7 x MAWP/ Vessel Set Pressure 10 barg)

LIN 600 Nm³/h

LOX 750 Nm³/h

LAR 750 Nm³/h

Pressure Safety Valve Capacity

LIN 1.090 kg/h

LOX 1.010 kg/h

LAR 1.240 kg/h

Vessel cleaned for LOX acc. EN 12300-O2



10066557


03

Seite PAGE

4 von 12 OF


2. P&ID

Level Indicator not included in scope of delivery.

Choose Level Indicator otherwise CE- approval will

not be granted.



10066557


03

Seite PAGE

5 von 12 OF




10066557


03

Seite PAGE

6 von 12 OF


3. Valves – Instrumentation

Tag Description

PI Pressure Indicator

D Pressure Build-Up Vaporizer

L/11-1 Discharge Line L/11-1

L/11-2 Discharge Line L/11-2 (plugged)

L/11-3 Discharge Line L/11-3 (plugged)

Tag DN PN Description

1 40 50 Globe Valve with Check Function Bottom Filling

2 40 50 Globe Valve Pressure Build-Up

3 25 50 Globe Valve Vent Valve

4 6 50 Compact Valve Manifold Bottom Gauge (+)

5 6 50 Compact Valve Manifold Gauge Bypass

6 6 50 Compact Valve Manifold Top Gauge (-) (locked open)

11 40 50 Globe Valve Discharge

12 25 50 Globe Valve Top Filling

13 25 50 Globe Valve Gas Shut-Off

18 20 50 Diverter Valve Change-Over Valve

21 15 50 Globe Valve Trycock

SV-1 20 (in) – 25 (out) 50 Safety Valve (Set=18 barg) Pressure Safety Valve

SV-2 20 (in) – 25 (out) 50 Safety Valve (Set=18 barg) Pressure Safety Valve

PC 25 40 Pressure Controller (Set=10 barg) Pressure Build-Up Regulator

NRV 15 40 Non Return Valve Non Return Valve

RV/O 150 n.a. Relieve Valve Relieve Valve Outer Jacket

9-1 50 n.a. Evacuation Connection Evacuation Connection



10066557


03

Seite PAGE

7 von 12 OF


4. Connections



10066557


03

Seite PAGE

8 von 12 OF


Fill Flange

Fill Flange suitable for

Flange DN40 PN40 acc. EN 1092-1

Discharge Line L/11-1 Lifting Lugs:

Discharge Line L/11-2 (plugged) Discharge Line L/11-3 (plugged)

Material: Stainless Steel




With Stainless Steel inlays



10066557


03

Seite PAGE

9 von 12 OF


5. Insulation

The Storage Vessel is vacuum-insulated with Perlite. In Status of Delivery (warm Conditions) the Vacuum will

be approx. 0,05 mbara. In Operating Conditions the Value of the Vacuum is < 0,05 mbara.

6. Vaporizer

Air-Heated Pressure Build-Up Vaporizers All Storage Vessel Types are equipped with Air-Heated Pressure Build-Up Vaporizer, which are mounted be-

neath the Vessel. These are dimensioned for a Discharge Capacity pointed in the technical Data. For higher or

continuous Discharges separate Pressure Build-Up Vaporizers have to be installed. For detailed Pressure Build-

Up Vaporizer Dimensioning see LINDE Brochure of Air-Heated Vaporizers or contact our Sales Department.

Air-Heated Product Vaporizers These Vaporizers are available for Discharge Capacities from 60*) Nm³/h up to 2.450*) Nm³/h. For detailed

Product Vaporizer Dimensioning see LINDE Brochure of Air-Heated Vaporizers or contact our Sales Department.

*) For 8h continuous Operation, Medium N2, 20°C ambient Temperature and Gas outlet Temperature 15°C below ambient Temperature

7. Corrosion Protection

Surface Preparation

Acc. to DIN EN ISO 12944-4

Pre-Treatment of Surface by Sandblasting acc. to DIN EN ISO 8504-2

Blasting-Level: Sa 2 ½ (acc. to DIN EN ISO 8501-1)

Coating

Primer: Two-Component Zinc Dust Primer acc. to SSPC-Paint 20

Basis: Epoxy Resin

Colour: grey

Dry Film Thickness: 80 µm

Finish: Two Component Finish Coating

Basis: Siloxane / Polyurethane

Colour: Standard RAL 9016 (Traffic White)

Dry Film Thickness: 100 µm

Total Paint Thickness: 180 µm

LINDE Corrosion Protection System is equivalent to

Corrosion Protection Class: C5-I-m and C5-M-m acc. to DIN EN ISO 12944-6



10066557


03

Seite PAGE

10 von 12 OF


8. Foundation

Sample: Vessel with options



10066557


03

Seite PAGE

11 von 12 OF


9. Proposal for Vessel Assembly

The Operator is responsible for Erection, Commissioning and all relating Measures. The Requirements of the

Competent Supervisory Authorities/ Regulatory Authorities have to be observed. No Basement Openings are

permitted within a Radius of 5m, Drain Inlets must be provided with a Liquid Seal.

A (for T18V490) = ~4 m

This Example shows Vessel-Type T18V30



10066557


03

Seite PAGE

12 von 12 OF


10. Documentation

- Manufacturers Declaration of Conformity

- TÜV- Certificate of Conformity

- TÜV- Test Report

- P & ID customised Cryogenic Vessel, including options

- Certificate of Safety Valve

- Manual for Operation, Commissioning and Maintenance

11. Further included in scope of basic

- CE-Qualification

- Logo included (Please specify type: Linde, BOC, AGA)

- Permanent stainless steel transport legs included

- Non corroding lifting lugs (stainless steel inlay)

- Packing and loading for truck transportation included

Sea freight optionally available

12. Miscellaneous

- If no coupling is ordered the cryogenic vessel will be equipped

with a plug-in plate for the coupling as standard.

See specific data sheet no. 10079477

- Please choose options according to currently valid price list

Subject to Changes without Notice. Errors excepted.

The reproduction, Distribution and Utilization of this Data Sheet as well as the Communication of its Contents to other without explicit Authorization is

prohibited. Offenders will be held liable for the Payment of Damages. All Rights reserved in the Event of the Grant of a Patent, Utility Model or Design.

© LINDE AG, July 2012

Data Sheet Cryogenic Vessel T18V490

Documents

Transcript of Data Sheet Cryogenic Vessel T18V490