Data link layar
-
Upload
jaysanshrestha -
Category
Technology
-
view
472 -
download
2
Transcript of Data link layar
![Page 1: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/1.jpg)
DATA LINK LAYER
Prepared by: anil shresthaTribhuvan university
![Page 2: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/2.jpg)
Data link layera)Services Provided to the Network Layer
b)Framing
c)Error Control
d)Flow Control
![Page 3: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/3.jpg)
DATA LINK LAYERDLL purpose? The goal of the data link layer is to provide reliable, efficient communication between adjacent machines connected by a single communication channel. Specifically:1. Group the physical layer bit stream into units called frames. Note that
frames are nothing more than ``packets'' or ``messages''. By convention, we'll use the term ``frames'' when discussing DLL packets.
2. Sender checksums the frame and sends checksum together with data. The checksum allows the receiver to determine when a frame has been damaged in transit.
3. Receiver recomputes the checksum and compares it with the received value. If they differ, an error has occurred and the frame is discarded.
4. Perhaps return a positive or negative acknowledgment to the sender. A positive acknowledgment indicate the frame was received without errors, while a negative acknowledgment indicates the opposite.
5. Flow control. Prevent a fast sender from overwhelming a slower receiver. For example, a supercomputer can easily generate data faster than a PC can consume it.
6. In general, provide service to the network layer. The network layer wants to be able to send packets to its neighbors without worrying about the details of getting it there in one piece.
![Page 4: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/4.jpg)
DATA LINK LAYER
Functions of the Data Link Layer:
a)Provide service interface to the network layerb)Dealing with transmission errorsc)Regulating data flow
1.Slow receivers not swamped by fast senders
![Page 5: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/5.jpg)
Functions of the Data Link Layer (2)
Relationship between packets and frames.
![Page 6: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/6.jpg)
Services Provided to Network Layer
(a) Virtual communication.(b) Actual communication.
![Page 7: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/7.jpg)
Services Provided to Network Layer
Placement of the data link protocol.
![Page 8: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/8.jpg)
Framing Framing by character count.
A character stream. (a) Without errors. (b) With one error.Problem: Even if the error is detected, the receiver cannot figure out
where the next frame starts ... its cannot resynchronize.
![Page 9: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/9.jpg)
Framing (2)
(a) A frame delimited by flag bytes.(b) Four examples of byte sequences before and after stuffing.Problem: Too tied to the 8-bit per character format ... UNICODE uses 16-bits/char
![Page 10: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/10.jpg)
Frames that need to be send in a bit stream:
FlagFlag
The sender sends the following bit stream:
FlagFlag Esc
The receiver will ignore this flag.
Frames that need to be send in a bit stream:
FlagEsc
The sender sends the following bit stream:
Esc Esc Flag FlagEsc
The receiver will ignore this Esc, and accept the flag.
The receiver will ignore this flag.
![Page 11: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/11.jpg)
Framing (3)The goal is to have 01111110 as a unique
bit pattern.
Bit stuffing(a) The original data.(b) The data as they appear on the line.(c) The data as they are stored in receiver’s memory after destuffing.
![Page 12: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/12.jpg)
Error Detection and Correction
a)Error-Correcting Codesb)Error-Detecting Codes
![Page 13: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/13.jpg)
Error-Correcting Codes Include enough redundancy to detect and correct errors. To understand errors, consider the following: Messages (frames) consist of m data (message) bits
and r redundancy bits, yielding an n = (m+r)-bit codeword.
Hamming Distance. Given any two codewords, we can determine how many of the bits differ. Simply exclusive or (XOR) the two words, and count the number of 1 bits in the result.
Significance? If two codewords are d bits apart, d errors are required to convert one to the other.
A code's Hamming Distance is defined as the minimum Hamming Distance between any two of its legal codewords (from all possible codewords).
In general, all possible data words are legal. However, by choosing check bits carefully, the resulting codewords will have a large Hamming Distance. The larger the Hamming distance, the better able the code can detect errors.
![Page 14: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/14.jpg)
Error-Correcting Codes
Use of a Hamming code to correct burst errors.
![Page 15: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/15.jpg)
Error-Detecting Codes Error-correcting codes are widely used on wireless links
that are noisy. However, they generate too large transmission overhead
for reliable links such as copper wire or fiber. Therefore, here error-detection codes are used.
When error is detected, the data is retransmitted. The goal for error correcting codes it to add redundancy to
the data so that the errors are not only detected but can be at the same time corrected (without retransmission).
For error-detecting codes the goal is to only detect the errors with the minimal transmission overhead. They are based on polynomial code also known as CRC (Cyclic Redundancy Check)
A k-bit frame is regarded as polynomial with coefficients 0 and 1 with terms from xk-1 to x0
For example: 110001 -> x5 + x4 + x0
![Page 16: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/16.jpg)
Polynomial arithmetic is done modulo 2 using the rules of algebraic field theory.Both addition and subtraction are identical to exclusive OR. For exampe:
10011011 11110000+11001010 -10100110-------------- ------------- 01010001 01010110
The sender and receiver must agree on a generator polynomial G(x).G(x) must have the first and last bit equal to 1.For a given frame, we consider its polynomial M(x) (longer than G(x)).The checksum is the reminder from the division M(x)*xr / G(x), where r is the degree of G(x).Polynomial T(x) obtained as M(x)*xr - checksum represents the check-summed frame that is divisible by G(x).
An example division is shown on the next page, where the frame is 1101011011 (corresponds to M(x))and the generator polynomial G(x) = x4 + x + x0 -> 10011.M(x)*xr -> 11010110110000 (we added 4 zeros at the end)
![Page 17: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/17.jpg)
Calculation of the polynomial code checksum.
![Page 18: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/18.jpg)
Upon receiving the check-summed frame, the receiver divides it by G(x):
[T(x) + E(x)] / G(x)
Since T(x) / G(x) is always zero, the result is always E(x) / G(x).
The errors containing G(x) as a factor will slip by, all other errors will be caught.
Single bit errors will be detected: We have E(x)=xi for a single bit error, E(x) / G(x) will not be zero, since G(x) must have the first and last bit equal to 1.
All errors consisting of an odd number of inverted bits will be detectedif G(x) is divisible by (x + 1).E(x) consists of odd number of terms, e.g., x5 + x2 + x0 and therefore, cannot be divisible by (x+1). Since E(x) has an odd number of terms E(1)=1.If E(x) = (x + 1) Q(x), then E(1) = (1 + 1) Q(1) = 0, a contradiction.
The polynomial G(x) used in IEEE 802 standard is
x32 + x26 + x23 + x22 + x16 + x12 + x11 + x10 + x8 + x7 + x5 + x4 + x2 + x1 + 1
![Page 19: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/19.jpg)
parity concept
![Page 20: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/20.jpg)
Parity concept
In parity check, a parity bit is added to every data unit so that the total number of 1s is even (or odd for odd-parity).
![Page 21: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/21.jpg)
Example
Suppose the sender wants to send the word world. In ASCII the five characters are coded as
1110111 1101111 1110010 1101100 1100100
The following shows the actual bits sent
11101110 11011110 11100100 11011000 11001001
![Page 22: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/22.jpg)
CRC generator and checker
![Page 23: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/23.jpg)
Binary division in a CRC
![Page 24: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/24.jpg)
Binary division in CRC checker
![Page 25: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/25.jpg)
Checksum
![Page 26: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/26.jpg)
Checksum
The sender follows these steps:
• The unit is divided into k sections, each of n bits.
• All sections are added using one’s complement to get the sum.
• The sum is complemented and becomes the checksum.
• The checksum is sent with the data.
![Page 27: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/27.jpg)
Checksum The receiver follows these steps:
• The unit is divided into k sections, each of n bits.
• All sections are added using one’s complement to get the sum.
• The sum is complemented.
• If the result is zero, the data are accepted: otherwise, rejected.
![Page 28: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/28.jpg)
Example
Suppose the following block of 16 bits is to be sent using a checksum of 8 bits.
10101001 00111001 The numbers are added using one’s complement 10101001 00111001
------------Sum 11100010
Checksum 00011101 The pattern sent is 10101001 00111001
00011101
![Page 29: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/29.jpg)
Example Now suppose the receiver receives the pattern
sent in Example 7 and there is no error. 10101001 00111001 00011101 When the receiver adds the three sections, it will
get all 1s, which, after complementing, is all 0s and shows that there is no error.
10101001 00111001 00011101 Sum 11111111 Complement 00000000 means that the
pattern is OK.
![Page 30: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/30.jpg)
Flow Control
Ensuring the sending entity does not overwhelm the receiving entity Preventing buffer overflow
Transmission time Time taken to emit all bits into medium
Propagation time Time for a bit to traverse the link
![Page 31: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/31.jpg)
Model of Frame Transmission
![Page 32: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/32.jpg)
Data Link Protocolsa)A Simplex Stop-and-Wait Protocol.
b)Sliding window protocol.
- A One Bit sliding window protocol.
- A protocol using Go Back N.
- A protocol using selective Repeat.
![Page 33: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/33.jpg)
Stop and Wait
Source transmits frame Destination receives frame and replies
with acknowledgement Source waits for ACK before sending next
frame Destination can stop flow by not send
ACK Works well for a few large frames
![Page 34: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/34.jpg)
Fragmentation
Large block of data may be split into small frames Limited buffer size Errors detected sooner (when whole frame
received) On error, retransmission of smaller frames is
needed Prevents one station occupying medium for
long periods Stop and wait becomes inadequate
![Page 35: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/35.jpg)
Stop and Wait Link Utilization
![Page 36: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/36.jpg)
Sliding Windows Flow Control
Allow multiple frames to be in transit Receiver has buffer W long Transmitter can send up to W frames
without ACK Each frame is numbered ACK includes number of next frame
expected Sequence number bounded by size of
field (k) Frames are numbered modulo 2k
![Page 37: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/37.jpg)
Sliding Window Diagram
![Page 38: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/38.jpg)
Example Sliding Window
![Page 39: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/39.jpg)
Sliding Window Enhancements
Receiver can acknowledge frames without permitting further transmission (Receive Not Ready)
Must send a normal acknowledge to resume
If duplex, use piggybacking If no data to send, use acknowledgement
frame If data but no acknowledgement to send, send
last acknowledgement number again, or have ACK valid flag (TCP)
![Page 40: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/40.jpg)
Stop and Wait
Source transmits single frame Wait for ACK If received frame damaged, discard it
Transmitter has timeout If no ACK within timeout, retransmit
If ACK damaged,transmitter will not recognize it Transmitter will retransmit Receive gets two copies of frame Use ACK0 and ACK1
![Page 41: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/41.jpg)
Stop and Wait -Diagram
![Page 42: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/42.jpg)
Stop and Wait - Pros and Cons
Simple Inefficient
![Page 43: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/43.jpg)
Go Back N (1)
Based on sliding window If no error, ACK as usual with next frame
expected Use window to control number of
outstanding frames If error, reply with rejection
Discard that frame and all future frames until error frame received correctly
Transmitter must go back and retransmit that frame and all subsequent frames
![Page 44: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/44.jpg)
Go Back N - Damaged Frame
Receiver detects error in frame i Receiver sends rejection-i Transmitter gets rejection-i Transmitter retransmits frame i and all
subsequent
![Page 45: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/45.jpg)
Go Back N - Lost Frame (1)
Frame i lost Transmitter sends i+1 Receiver gets frame i+1 out of sequence Receiver send reject i Transmitter goes back to frame i and
retransmits
![Page 46: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/46.jpg)
Go Back N - Lost Frame (2)
Frame i lost and no additional frame sent Receiver gets nothing and returns neither
acknowledgement nor rejection Transmitter times out and sends
acknowledgement frame with P bit set to 1
Receiver interprets this as command which it acknowledges with the number of the next frame it expects (frame i )
Transmitter then retransmits frame i
![Page 47: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/47.jpg)
Go Back N - Damaged Acknowledgement
Receiver gets frame i and send acknowledgement (i+1) which is lost
Acknowledgements are cumulative, so next acknowledgement (i+n) may arrive before transmitter times out on frame i
If transmitter times out, it sends acknowledgement with P bit set as before
This can be repeated a number of times before a reset procedure is initiated
![Page 48: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/48.jpg)
Go Back N - Diagram
![Page 49: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/49.jpg)
Selective Reject
Also called selective retransmission Only rejected frames are retransmitted Subsequent frames are accepted by the
receiver and buffered Minimizes retransmission Receiver must maintain large enough
buffer More complex login in transmitter
![Page 50: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/50.jpg)
Selective Reject -Diagram
![Page 51: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/51.jpg)
THE END
![Page 52: Data link layar](https://reader033.fdocuments.in/reader033/viewer/2022052822/554f477eb4c905423f8b4a20/html5/thumbnails/52.jpg)
THANK YOU