[DAT-903-C] iDirect Mediator - Remote Controlled Lighting · iDirect Mediator Version: 16.08 .16...
1
SPECIFICATION INDICATOR LIGHTS Technical Drawing iDirect Mediator Version: 16.08.16 PAGE 1 OF 1 PRODUCT SUMMARY DAT-903-C ORDER NO. 12314 100-240V 50/60Hz DESCRIPTION INPUT OUTPUT DMX INPUT DMX OUTPUT INSTALLATION REQUIREMENT ETHERNET TYPE IP ASSIGNMENT PROTOCOL Power is supplied to the unit via 4-pin XLR provided using the included universal adaptor. 100-240Vac, 50-60Hz, 0.3A +12Vdc, 1.0A The mediator takes an input of DMX 512 via 5-pin XLR. As default channel 6 is assigned to the master dimming channel, which facilitates dimming of all fixtures simultaneously. 1 Control of fixtures is performed through DMX 512 via 5-pin XLR. The RCL Mediator is capable of controlling up to 126 RCL fixtures via the RCL DMX 6-way Splitter (12147). A splitter/isolator must be present between mediator and DMX circuit. 10/100BASE-T Auto DHCP UDP Broadcast 2 DESCRIPTION The Mediator Box has two indicator lights located to the left of the DMX input Jack: DMX Control and Ethernet. DMX CONTROL The DMX control light will illuminate solidly when a DMX input is present. The DMX control light will flash when the mediator receives a changed DMX message. ETHERNET The Ethernet light will be solid when first connected; this indicates that a linik has been detected. The Ethernet light will flash once a connection has been established and the mediator has an assigned IP address. NOTES NOTES 1 Custom configurations are available, please contact RCL. 2 POWER ETHERNET DMX OUT OUT IN DMX CONTROL ETHERNET 170 54 170 165 iDirect Mediator Box - Specification, Installation Requirements and Notes
Transcript of [DAT-903-C] iDirect Mediator - Remote Controlled Lighting · iDirect Mediator Version: 16.08 .16...
![Page 1: [DAT-903-C] iDirect Mediator - Remote Controlled Lighting · iDirect Mediator Version: 16.08 .16 PAGE 1 OF 1 PRODUCT SUMMARY DAT-903-C ORDER NO. 12314 100-240V 50/60Hz DESCRIPTION](https://reader033.fdocuments.in/reader033/viewer/2022041610/5e3738601b064e5e270b6a25/html5/thumbnails/1.jpg)
SP
ECIF
ICA
TIO
N
IND
ICA
TOR
LIG
HTS
Technical Drawing
iDirect Mediator
Version: 16.08.16
PAGE 1 OF 1
PRODUCT SUMMARY
DAT-903-C
ORDER NO. 12314
100-240V 50/60Hz
DESCRIPTION
INPUT
OUTPUT
DMX INPUT
DMX OUTPUT
INSTALLATION REQUIREMENT
ETHERNET TYPE
IP ASSIGNMENT
PROTOCOL
Power is supplied to the unit via 4-pin XLR provided using the included universal adaptor.100-240Vac, 50-60Hz, 0.3A+12Vdc, 1.0AThe mediator takes an input of DMX 512 via 5-pin XLR. As default channel 6 is assigned to the master dimming channel, which facilitates dimming of all fixtures simultaneously.1
Control of fixtures is performed through DMX 512 via 5-pin XLR. The RCL Mediator is capable of controlling up to 126 RCL fixtures via the RCL DMX 6-way Splitter (12147).A splitter/isolator must be present between mediator and DMX circuit.10/100BASE-TAuto DHCPUDP Broadcast2
DESCRIPTION
The Mediator Box has two indicator lights located to the left of the DMX input Jack: DMX Control and Ethernet.
DMX CONTROL
The DMX control light will illuminate solidly when a DMX input is present. The DMX control light will flash when the mediator receives a changed DMX message.
ETHERNET
The Ethernet light will be solid when first connected; this indicates that a linik has been detected. The Ethernet light will flash once a connection has been established and the mediator has an assigned IP address.
NO
TES NOTES
1 Custom configurations are available, please contact RCL.2
POWER ETHERNET DMX OUT OUTIN
DMX CONTROL
ETHERNET
170
54
170
165
iDirect Mediator Box - Specification, Installation Requirements and Notes
