Sticker label printing |Sticker printer |Sticker maker |Label sticker
Daqin Mobile phone sticker machine
Transcript of Daqin Mobile phone sticker machine
Daqin Mobile Phone Sticker Machine Daqin, the global leader of mobile phone sticker machine, had been developed a professional solution
especially for producing custom mobile phone sticker for any brand and model mobile phone in the
world since 2002. It is for commercial purpose use. You can start your own business of selling custom
mobile phone stickers with this powerful system.
Below the making process of phone stickers of iPhone 5:
The Daqin mobile phone
sticker machine is actually not
refers to a specific one
machine, but a series of
software and machines
combine together. The whole
system contains the Design
Software, Printer, Laminator
and Cutter. Also, the raw
materials of making mobile
phone stickers are needed,
such as the printing design films
and lamination effect films.
The most important one is the
design software, which contains
more than 3,000 cutting
templates for mobile phones all around the world and more than 5,000 design drawings. All the mobile
phone sticker cutting templates are created by Daqin staffs based on multiple times test on original
mobile phones. The cutting templates are highly accurate and 100% match with corresponding mobile
phones.
Select your ideal model of mobile phone, then the corresponding templates will be displayed in the
editing area. You can upload your own design picture to make the custom stickers, or you can use the
original design picture in the data base.
Once the design process is done, now we can click the print button in the software, and then the printer
will print out the design on an A4 size blank printing design film. The printer is 6 colors inkjet printer can
provide better printing effects than any other 4 colors inkjet printer.
When the printing process is done, we can take an A4 size sheet of lamination effect film, such as a
glossy one, and then laminate it on the well-printed film by the laminator. The laminator is with 4 rollers
which can effectively avoid bubble during the lamination process. The lamination film can make the
sticker becomes waterproof and anti-scratch.
Finally let’s go to the cutting process. Put the well-laminated film into the cutter, and then click cut
button in the software. Within 1 minute the mobile phone sticker will come out. Then it’s time to peel it
off from the backing paper, and then manually apply it on the back, sides and front of the mobile phone.
Don’t worry, if you mistakenly apply it on the mobile cover, the sticker can be easily peel off and then
apply again without leaving any residue on the cover.