DALI ROT NFC EN D0086 - Lunatone · article number 86459822-NFC (EU) 86459822-NFC-CH (Switzerland)...

© 2019-06-26, Lunatone Industrielle Elektronik GmbH DALI ROT

DALI ROT rotary switch

Datasheet

Control Device

Rotary knob for controlling light

level, colour and colour

temperature in DALI-systems

Art. Nr. 86459822-NFC

Art. Nr. 86459822-NFC-CH

cover and rotary knob:

see purchase order information at

end of document

2

DALI ROT, Datasheet © 2019-06-26, Lunatone Industrielle Elektronik GmbH

DALI ROT Control Device

Overview

• DALI-2 control device according to

IEC62386-103

• multiple operating modes for dimming

and colour control

• operating mode for control of light

level and colour temperature of DT8

tunable white luminaires (TW)

• operating modes for control of light

level and colour of DT8 RGB- and

RGBW-luminaires (RGB, RGBW)

• operating mode sending DALI-2 event

messages (D2I)

• operating mode for control of

Lunatone LED-Dimmer in the

operating modes Colour&Dim and

Balance&Dim (BD/CD)

• multimaster capable, multiple

modules can be installed on one DALI-

line and/or DALI group

• factory setting allows easy to use

switching and dimming

• easy configuration via DALI USB

interface and DALI-Cockpit software

tool or directly with the help of the

app “DALI-NFC”

• the module is supplied directly by the

DALI-line, no additional supply

required

• double DALI terminals for easy looping

of the bus connection

• simple installation in a standard back

box

• suitable to be used with cover and

knob of most common manufacturers,

cover and knob available as accessory

• beeper for localisation

Specification, Characteristics

type DALI ROT

article number 86459822-NFC (EU) 86459822-NFC-CH (Switzerland)

GTIN 9010342010309 9010342012570

DALI-Interface, supply: DA, DA

input type DALI, supply

marking DA, DA

input voltage range 9,5V … 22,5Vdc according to IEC62386

typ. current consumption DALI (at 16,5V) 1,6 mA

max. current consumption DALI (at 22,5V) 5 mA

number of addresses for DALI control gear 0

number of addresses for DALI control device 1

3


environmental conditions:

storing and transportation temperature -20°C … +75°C

operational ambient temperature -20°C … +75°C

rel. Humidity, none condensing 15% … 90%

general data:

dimensions 70mm x 70mm x 45mm

shaft diameter 4mm, adapter with 6mm

mounting / intended use back box

protection class II in intended use

protection degree IP40

protection degree IP20

manual control rotary knob with integrated pushbutton function

function & operating modes

1. I: Intensity – Switch&Dim (default)

2. TW: Intensity & TunableWhite

3. RGB: Intensity & RGB

4. RGBW: Intensity & RGBW

5. D2I: DALI-2 Instancemode

6. BD/CD: Balance&Dim / Colour&Dim

max. startup time 150ms

terminals:

connection type spring terminal connector

wire size solid core 0,5 … 1,5 mm2 (AWG20 … AWG16)

wire size fine core 0,5 … 1,5 mm2 (AWG20 …AWG16)

wire size using wire end ferrule 0,25 … 1 mm2

stripping length 8,5 … 9,5 mm / 0,33 … 0,37 inch

standards:

DALI IEC62386-101:2014

IEC62386-103:2014

EMC EN 61547

EN 50015 / IEC CISPR15

safety EN 61347-2-11

EN 61347-1

markings DALI-2, CE

dimensions DALI ROT

4


Installation

The DALI ROT module is connected and supplied directly by the DALI-line (typ. current consumption

1,6 mA).

Multiple DALI ROT modules and DALI luminaires can be connected to a DALI-line, in total up to 64 pcs

each. DALI ROT modules controlling the same group are synchronized automatically. A changeover

switch, cross or step relay circuit is not required.

The device is available with, but also without, knob and cover. It can be easily combined with covers

of common manufacturers. The module can be mounted on a back-box (installation depth at least

25mm). The shaft diameter is 4 mm or 6mm with adapter.

Application and Function

The DALI ROT rotary switch is used to control the light level and/or colour temperature respectively

colour of DALI-compliant luminaires. The function is defined by operating mode selection.

With the help of the DALI Cockpit software tool (PC) or “DALI-NFC”-App (NFC-capable mobile device)

the commissioning and addressing as well as the setup of the destination address and, if required,

the minimum and the maximum level can be performed.

For simple installations (broadcast) the factory default settings are sufficient. An integrated beeper

can be used for device localization. Alternatively the device can be identified by the serial number on

the housing.

The factory default settings are suitable for broadcast switching and dimming. The operating mode

can be changed with the DALI-Cockpit or DALI-NFC app or with the help of another control device

using the DALI-command SET OPERATING MODE.

Overview Operating Modes:

Nr.

Kurzbez.

Name

Funktion Kurzbeschreibung Wert zum

Aktivieren mit SET

OPERATING MODE

1

„I“

Intensity

Press: On/Off

Rotate: Dim

0xA0 oder 0x0

(default)

2

„TW“

Intensity &

Tunable

White

, Mode

Mode1:

Mode2:

Short Press: On; Change Mode

Long Press: Off

Mode 1 - Rotate: Dim

Mode 2 - Rotate: Colour

Temperature

0xA1

3

„RGB“

Intensity &

RGB

, Mode

Mode1:

Mode2:


Long Press: Off


Mode 2 - Rotate: Colour (RGB)

0xA2

4

„RGBW“

Intensity &

RGBW

, Mode

Mode1:


Long Press: Off


Mode 2 - Rotate: Colour (RGB) )

0xA3

5


Mode2:

Mode3:

Mode 3 - Rotate: Colour (W)

5

„D2I“

DALI-2

Instancemode

DALI-2 Instancemode

Instance 0: Instancetype 0 (acc.

IEC62386-103)

Instance 1: Instancetype 1 (acc.

IEC62386-301)

Rotate: Instance 1, generic,

eventmessages for start rotation

CW, start rotation CCW and stop

rotation

Press: Instance 0, push button

0xA4

6

„BD/CD“

Balance&Dim

/ Colour&Dim

Balance&Dim / Colour&Dim

(for Lunatone devices only)

, Mode

Mode1:

Mode2: ,


Long Press: Off


Mode 2 - Rotate: Colour / Colour

Temperature

0xA5

6


Operating Mode 1: : “I” – Intensity: Switch / Dim

application: switch and dim with DALI ROT module

operator actions

Function:

Turn clockwise to dim up or counter-clockwise to dim down the light using the UP and DOWN

commands. The respective luminaires can be switched on and off by pushing the knob.

Operating Mode 2: “TW” – Intensity & Tunable White

application: tunable white control with DALI ROT module

operator actions

Function:

If the light is off, it can be switched on by pressing the button. Turn clockwise to dim up or counter-

clockwise to dim down the light by using UP and DOWN commands.

If the light is on the mode can be changed by a short press, i.e. the operator can select if rotating the

knob is used for dimming of for changing the colour temperature (CCT) of DALI-DT8 compatible

luminaires (colour type Tc). After 10 seconds of operator inactivity the mode falls back to dimming

automatically (mode 1).

The respective luminaires can be switched off by a long press.

7


With the help of a DT8toDT6-converter the colour temperature (balance) on conventionally DALI-

controlled single luminaires (DT6) can be adjusted. Even the balance between direct and indirect can

be adapted.

application: balance- and level control of direct and indirect lighting (type 1) or tunable white and

level control of 2 conventional DT6-luminaires (type 2) with the help of a DT8toDT6 converter

Operating Mode 3: “RGB” – Intensity & RGB

application: colour control RGB + dimming

colour RGB

operator actions

Function:




knob is used for dimming or for changing the colour of DALI DT8 compliant RGB luminaires (colour

type RGBWAF). After 10 seconds of operator inactivity the mode falls back to dimming automatically

(mode 1).


8


Operating Mode 4: “RGBW” – Intensity & RGBW

application: colour control RGB+W and dimming

colour RGB

operator actions

Function:




knob is used for dimming, for changing the colour or for changing the white component of DALI DT8

compliant RGBW luminaires (colour type RGBWAF). After 10 seconds of operator inactivity the mode

falls back to dimming automatically (mode 1).


Lunatone RGBW-LED-dimmer provide various output modes, hence intensity of RGB and white

component can be controlled together or separated.

Operating Mode 5: “D2I” - DALI-2 Instancemode

Function:

In this operating mode the luminaires are not controlled directly by the DALI ROT, it is suitable for

integration in DALI-2 capable central control systems. The DALI ROT uses event messages to inform

about operator actions on the input devices. These messages have to be evaluated by other control

devices.

The DALI ROT provides 3 instances:

The first instance (instance 0) is assigned to the push button function and uses instance type 1

(according IEC62386-301: Particular requirements – input devices – push buttons).

The second instance (Instance 1) is assigned to the rotation of the knob and uses instance type 0

(according IEC62386-103, general purpose).

9


By instance 1 (instance type 0, general purpose) supported events:

Event name Event Information Description

Rotation Clockwise Started 00 0000 0000b The rotary knob has started to rotate clockwise

Rotation Counter

Clockwise Started

00 0000 0001b The rotary knob has started to rotate counter

clockwise

Rotation Stopped 00 0000 0010b The rotation of the rotary knob has stopped

The third instance (instance 2) is second instance is as well assigned to the rotation of the knob and

uses instance type 3 (according IEC62386-302: Particular requirements – input devices – absolute

input devices) with 8Bit resolution – hence it represents an alternative option for evaluating the

rotation of the knob.

Operating Mode 6: “BD/CD” - Balance&Dim/Colour&Dim

Function:

This operating mode works only in combination with Lunatone LED-Dimmer, which support operating

mode Balance&Dim (2Ch or CW-WW Dimmer) or Colour/Dim (3Ch, 4Ch, RGB or RGBW Dimmer). In

difference to DT8-Colour Control using an extended command set, the devices provide a second

DALI-address that which is used to change colour temperature and or colour. Therefore standard

DALI-comands like UP/DOWN can be used.

The function of the DALI ROT is similar to operating mode 2 (for tunable white luminaires in

balance&dim mode) or operating mode 3 (for colour luminaires in colour&dim mode):




knob is used for dimming, for changing the colour or colour temperature. After 10 seconds of

operator inactivity the mode falls back to dimming automatically (mode 1).

10


Effective Range

In the DALI Rot up to 4 address entries can be used for the effective rage. As destination address

short addresses, group addresses or broadcast can be used.

In operating modes 1-4 (Intensity, Tunable White, RGB and RGBW) commands are sent to all

destination addresses. However, it is recommended to use only one address entries for colour

control..

In operating mode 6 (Balance&Dim / Colour&Dim) the first address entry is used for intensity

(dimming, switching), the second is used for colour control. Destination address 3 and 4 are not used.

Settings

Factory Settings:

The DALI ROT is delivered with these settings:

Operating mode 1: „I“ – Intensity: Switch/Dim (DALI Operating Mode 0)

Destination: Broadcast

On-Command: DAP 100%

Off-Command: DAP 0%

DALI-Cockpit:

The settings can be made with the DALI-Cockpit software tool and a suitable interface to the DALI-

line (e.g.: DALI USB, DALI SCI RS232 oder DALI4Net).

11


Delivery state:

Settings:

• addressing (Random Addressing for DALI-2 control devices (no luminaire address required)

• assignment to 32 control device groups (Attention: these are no luminaire / control grear

groups)

• operating mode selection

• operating mode 1-3: destination, On-command, Off-command

o On-commands: DAP, RECALL MAX, RECALL MIN, GOTO SCENE X, GOTO LAST ACTIVE

LEVEL

o Off-commands: DAP0, OFF and GOTO SCENE X

• Feature: Switch on by rotation (without pressing) if state of destination is Off (this behaviour

can be deactivated)

• operating mode 4:

o activate/deactivate instances

o select and configure instances in different tabs

o assign instance to instance groups

o define event scheme (= frame format of event messages)

o button function (instance1): configuration of all instance type 1 parameters

(according to IEC62386-103)

12


Instancemode:

Settings:

• Operating mode 5:

o Enable/Disable instance

o Select all instances via tabs

o Assign instances to instancegroups

o Define event schemes (= format of event messages)

o button (Instance1): configuration of all instancetype 1 parameters (according

IEC62386-301)

13


App & NFC:

The DALI ROT with new integrated NFC-interface offers easy to use configuration

of the device with the app „DALI NFC“ and a NFC-capable mobile device (android).

The configuration of the DALI ROT can already be done before installation, since

the device has not to be connected for the configuration.

14


Settings:

• read and assign DALI-2 control device

short address manually

• assignment to 32 control device groups

• operating mode selection

• operating mode 1-4, 6: destination, On-

command, Off-command

o On-commands: DAP, RECALL

MAX, RECALL MIN, GOTO SCENE

X, GOTO LAST ACTIVE LEVEL

o Off-commands: DAP0, OFF and

GOTO SCENE X

• Feature: Switch on by rotation (without

pressing) if state of destination is Off

(this behaviour can be deactivated)

DALI Instruction Set

The DALI Rotary Switch acts as control device and sends predefined DALI-commands when an

operator action (turning or pushing knob) occurs.

The device is based on the standard for DALI control devices (IEC 62386-103). The module is

multimaster capable and works as application controller, the function is described in this datasheet.

15


Purchase Order Information

Art.Nr. 86459822-NFC: DALI ROT, preconfigured operating mode: Tunable White, rotary switch insert

for switching, dimming and colour temperature adjustment in DALI systems

Art.Nr. 86459822-NFC-CH: DALI ROT, preconfigured operating mode: Tunable White, rotary switch

insert for switching, dimming and colour temperature adjustment in DALI systems, suitable for back

boxes in Switzerland (Feller)

Accessory:

Art.Nr. 86459822-Z01: cover and rotary knob, alpine white, Jung Series A

Art.Nr. 86459822-Z02: cover and rotary knob, black, Jung Series A

Art.Nr. 86459822-Z03: Adapter 6mm

Art.Nr. 86459822-Z04: cover and rotary knob, white (RAL9016)

Art.Nr. 86459822-Z05: cover and rotary knob, black

© 2019-06-26, Lunatone Industrielle Elektronik GmbH DALI ROT

Additional Information and

Equipment

DALI-Cockpit – free configuration tool from

Lunatone for DALI systems

http://lunatone.at/de/dali-systeme/software/

Lunatone DALI products

http://www.lunatone.at/de/

Lunatone datasheets and manuals

http://lunatone.at/de/downloads/

Contact

Technical Support: [email protected]

Requests: [email protected]

Disclaimer

Subject to change. Information provided without guarantee.

The datasheet refers to the current delivery.

The function in installations with other devices must be tested

for compatibility in advance.

DALI ROT NFC EN D0086 - Lunatone · article number 86459822-NFC (EU) 86459822-NFC-CH (Switzerland)...

Documents

Transcript of DALI ROT NFC EN D0086 - Lunatone · article number 86459822-NFC (EU) 86459822-NFC-CH (Switzerland)...