DALI interface - Micro-lens optic in polycarbonate cover
3
Smartform LED BBS460 BBS460 LED24-/840 PSD W60L60 MLO-PC PI BBS460 - LED Module 2400 lm - Power supply unit with DALI interface - Micro-lens optic in polycarbonate cover Reflecting Philips’ drive for simple, sustainable solutions, SmartForm recessed is now available with LED technology inside. Designed to fit in a wide range of ceiling types, this family of highly versatile modular and semi-modular luminaires can fulfill the majority of project requirements in most applications.SmartForm LED offers higher luminaire efficiency than conventional MLO (micro-lens optic) solutions, enabling significant energy savings. At the same time, its choice of optics ensures a range of inspiring light effects to bring office environments to life. Product data • General information Product family code BBS460 [BBS460] Lamp family code LED24 [LED Module 2400 lm] Light source color 840 [840 neutral white] Light source replace- able false [No] Driver/power unit/ transformer PSD [Power supply unit with DALI interface] Driver included true [Yes] Optical cover/lens type MLO-PC [Micro-lens optic in polycarbonate cover] Emergency lighting No [-] Embedded control No [-] Dimmable Yes [Yes] Connection PI [Push-in connector 3-pole] Protection class IEC CLI [Safety class I] Ingress protection code IP40 [Wire-protected] Mech. impact protec- tion code IK02 [0.2 J standard] Air-handling No [-] Color WH [White] Glow-wire test 850/5 [Temperature 850 °C, duration 5 s] Flammability mark F [For mounting on normally flammable surfaces] Safety device No [-] CE mark CE [CE mark] ENEC mark ENEC [ENEC mark] • Electrical Input voltage 220-240 V [220 to 240 V] Input frequency 50-60 Hz [50 to 60 Hz] Control signal voltage 0-16 V [0-16 V DC DALI] • Mechanical Geometry W60L60 [Width 0.60 m, length 0.60 m] Housing material STL [Steel] Reflector material ALU [Aluminum] • Initial perform. (IEC compliant) Initial input power 25 W [25 W] Initial luminous flux 1800 Lm Initial LED luminaire efficacy 72 Lm/W Init. Corr. Color Temperature 4000 [4000 K] Init. Color Rendering Index ≥80 [≥80] Initial chromaticy (0.38, 0.38) SDCM <3.5 • Over time perform. (IEC compliant) Median useful life L90B50 25000 hr Median useful life L80B50 50000 hr Driver failure rate at 5000 h 1 % • Application conditions Average ambient temperature T25 [+25 °C] Ambient temperature range +10 to +40°C [+10 to +40 °C] Maximum dim level 1% [1%]
Transcript of DALI interface - Micro-lens optic in polycarbonate cover
Smartform LED BBS460BBS460 LED24-/840 PSD W60L60 MLO-PC PI
BBS460 - LED Module 2400 lm - Power supply unit withDALI interface - Micro-lens optic in polycarbonate cover
Reflecting Philips’ drive for simple, sustainable solutions, SmartFormrecessed is now available with LED technology inside. Designed to fitin a wide range of ceiling types, this family of highly versatile modularand semi-modular luminaires can fulfill the majority of projectrequirements in most applications.SmartForm LED offers higherluminaire efficiency than conventional MLO (micro-lens optic)solutions, enabling significant energy savings. At the same time, itschoice of optics ensures a range of inspiring light effects to bring officeenvironments to life.
Product data
• General informationProduct family code BBS460 [BBS460]Lamp family code LED24 [LED Module 2400 lm]Light source color 840 [840 neutral white]Light source replace-able
false [No]
Driver/power unit/transformer
PSD [Power supply unit with DALIinterface]
Driver included true [Yes]Optical cover/lenstype
MLO-PC [Micro-lens optic inpolycarbonate cover]
Emergency lighting No [-]Embedded control No [-]Dimmable Yes [Yes]Connection PI [Push-in connector 3-pole]Protection class IEC CLI [Safety class I]Ingress protectioncode
IP40 [Wire-protected]
Mech. impact protec-tion code
IK02 [0.2 J standard]
Air-handling No [-]Color WH [White]Glow-wire test 850/5 [Temperature 850 °C, duration
5 s]Flammability mark F [For mounting on normally
flammable surfaces]Safety device No [-]CE mark CE [CE mark]ENEC mark ENEC [ENEC mark]
• ElectricalInput voltage 220-240 V [220 to 240 V]Input frequency 50-60 Hz [50 to 60 Hz]Control signalvoltage
0-16 V [0-16 V DC DALI]
• MechanicalGeometry W60L60 [Width 0.60 m, length 0.60
m]Housing material STL [Steel]Reflector material ALU [Aluminum]
• Initial perform. (IEC compliant)Initial input power 25 W [25 W]Initial luminous flux 1800 LmInitial LED luminaireefficacy
72 Lm/W
Init. Corr. ColorTemperature
4000 [4000 K]
Init. Color RenderingIndex
≥80 [≥80]
Initial chromaticy (0.38, 0.38) SDCM <3.5
• Over time perform. (IEC compliant)Median useful lifeL90B50
25000 hr
Median useful lifeL80B50
50000 hr
Driver failure rate at5000 h
1 %
• Application conditionsAverage ambienttemperature
T25 [+25 °C]
Ambient temperaturerange
+10 to +40°C [+10 to +40 °C]
Maximum dim level 1% [1%]
Suitable for randomswitching
Yes [Yes (relates to presence/movement detection and daylightharvesting)]
• Product DataOrder code 910501970603Full product code 910501970603Full product name BBS460 LED24-/840 PSD W60L60
MLO-PC PIOrder product name BBS460 LED24-/840 PSD W60L60
MLO-PC PI
Pieces per pack 0Packs per outerbox 1Bar code onouterbox - EAN3
8717943913756
Logistic code(s) -12NC
910501970603
Net weight per piece 6.100 kg
Dimensional drawing
BBS460 LED24-/840 PSD W60L60 MLO-PC PI
Photometric data
BBS460 W60L60 1xLED24/840 MLO-PC
Smartform LED BBS460
2014, November 21data subject to change
Smartform LED BBS460
© 2014 Koninklijke Philips N.V. (Royal Philips)All rights reserved.
Specifications are subject to change without notice. Trademarks are the property ofKoninklijke Philips N.V. (Royal Philips) or their respective owners.
www.philips.com/lighting
2014, November 21data subject to change
