DAIRY PRODUCTS CUTTING BLADES

le concept de coupe

01For decades, Mongin have been following the evolution of high standards in the agro-food industry, with particular focus on the diary products sector. The expertise gained over the years is proof of our manufacturing “Savoir faire”. Our customer loyalty demons-trates our quality and our large, modern production capability is evidence of our performance and adaptability.

MONGIN Company - 1 rue Louis Blériot ZI du Mas des Landes - 87170 ISLE - FRANCETel : +33(0)5.55.01.22.18 / Fax : +33(0)5.55.01.78.88

www.monginindustry.com - b.cheyroux@monginindustry.com

1 / Fixed knife2 / Moving plate

TEAR-OFF STRIP CUTTING Different knives can be manufactured to fit your products and your machine.

TRANSVERSAL CUT / CUTTING PLATE AND KNIFETYPE OF MACHINE : ERCA, ARCIL, …The cutting plate is movable while knives are fixed. Different coatings are available. Plate dimensions can be adjusted to the number of slot needed.

1 / Gear2 / Joint O ring3 / Key4/ Circlip5 / Shaft6 / Upper shaft7/ Circlip8 / Spacer9/ Bearing10 / Counter-knife11 / Block12 / Screw13 / Cylindrical pin14 / Axis15 / Moving knife

YOGURT POT’S DESIGN CUTTING BLADETRANSVERSAL CUT / DESIGN CUTTING TOOLTYPE OF MACHINE : ERCA, ARCIL, …Depending on the quality of the cut required for your finished product, we offer a magnetic knife combined with a counter-knife with either a smooth or a wave-shaped cutting edge. The latter allows for a progressive cutting action. The knives are manufactured in a full hardened steel with or without coating.

A

03

04

14

10

11

02

01

01 02

06

08

12

13

0905

15

07

TYPE DIMENSIONS

D b t

Slitting knife 86 60,2 1,2

Slitting knife 89 60,2 1,2

Slitting knife 86 60 1,2

TYPE DIMENSIONS

D b t

Counter knife 97 35 10

Counter knife 97 54 10

Counter knife 88 35 10

TYPE DIMENSIONS

D b t

Holder 82 55 10

isosceles tooth tiger tooth alternate tooth

scalloped tooth perforating tooth progressive tooth

OVER-PACKAGING CUTTING BLADESSERRATED KNIVESSeveral fixing systems are available to fit your machines. Moreover, we can manufacture any type of cutting teeth according to the quality of cut you require for your product. Tooth types :”tiger”, perforation, isosceles, scalloped, single or doble sides, …

C

BOTTLE’S NECK CUTTING BLADESBLADES FOR TRIMMERTYPE OF MACHINE : SERAC, MAER, SIDEL,...Different sharpening, coatings and steel are available to suit your machines.

B

LONGITUDINAL CUT / SLITTING KNIFEMACHINE TYPE ERCA, ARCIL,...Standard models are available (see. table). However we can manufacture on demand according to your technical specifications.

01 02 03

04 05 06

DAIRY PRODUCTSYOGURT POT’S DESIGN CUTTING BLADESLongitudinal cutN°1 - HolderN°2 - Counter knife N°3 - Slitting knifeTransversal cutN°4 - Moving plateN°5 - Fixed knivesDesign cutN°6 - Magnetic counter knifeN°7 - Blade with TIN coatingTransversal cutting toolN°8 - BlockN°9 - GearN°10 - Moving bladeN°11 - Counter knife

BOTTLE’S NECK CUTTING BLADESLame de décolleteuse N°12 - Blade for trimmerN°13 - Blade for trimmer with fixingN°14 - Blade for trimmer with fixing

OVER-PACKAGING CUTTING BLADESerrated knivesN°15 - Isosceles toothN°16 - « Tiger » tooth

01 02 03

04 05

08

12

13

15

14

09 10

11

16

06

07