This manual is intended for users of the DA-RM1100 corner mounting bracket. It includes instructions for mounting the DA-RM1100 corner mounting bracket to a corner.

•This bracket is intended to be used with DC-S series model of cameras. Do not use it with other models of cameras.

•This installation should be performed by a qualified service personnel in conformance to all local codes.

•You may need to reinforce the corner. If the corner is not strong enough to support the camera, the camera may fall.

•Do not use this product for other purposes.

Mounting

Mount the bracket to the corner as follows:

1 Mount the bracket 1 to the corner.

Bracket 1

Corner

2 Mount the bracket 2 to the bracket 1.

Bracket 2

Bracket 1

Connect your camera to the bracket as follows:

3 Insert cables from external devices, network and power adapter into the bracket 2.

4 Connect the camera to the bracket 2 by turning the universal nut.

Do not turn the camera but turn the universal nut when connecting the camera to the bracket 2, otherwise, the cable will be twisted.

5 Turn on power.

Bracket 2

Camera

Universal NutCable

DA-RM1100 INSTALLATION MANUAL

IDIS Co., Ltd.For more information, please visit www.idisglobal.com

Dimensions

Unit: mm (inch)91

(3.5

8)

31 (1

.22)

130 (5.12)

150 (5.91)

Ø 11 (0.43)

90 (3.54)

30

(1.18)

108.5 (4.27)Corner

90 (3.54)

140

(5.5

1)

116

(4.5

7) Ø 49 (1.93)

M10 x 1.5 (0.06)

Ver.1.0