D200/S SPECIFICATIONS 250kVA - Access Hire Australia · the generator. All iron and steel surfaces...
1
GENERATORS AUSTRALIA www.generatorsaustralia.com.au (08) 6258 4195 GENERAL ENGINE ALTERNATOR Model Power Type Prime Power (kW/kVA) Standby Power (kW/kVA) Engine Make and Model Engine Type Engine Prime Power (kW) Engine Standby Power (kW) Fuel Tank Capacity (L) Fuel Consumption (L/h)* Battery Type Bore (mm) x Stroke (mm) No. of Cylinders Displacement (L) Compression Ratio Intake Model Speed Control System Lubricating Oil Capacity (L) Lub Consumption (g/kW/h) *Fuel Consumption is based on 100% load Model Frequency (Hz) Continuous Output (kW/kVA) Power Efficiency Type Exciter Type Voltage Regulator Voltage Regulation No. of Phases Insulation Protection Rated Power Factor Stator Winding Winding Pitch Winding Leads Waveform Distortion Altitude (m) D200/S Diesel 200/250 220/275 DEUTZ BF6M1015C-LAG1A Water-cooled, in line, 4 stroke, 1500rpm 228 250 727 54.4 24V 132 x 145 6 11.906 17 Turbo intercooler Electronical speed governing 34 0.609 SLG274K1, single bearing IP22 50 200/250 91.0% 4 pole, rotating field Brushless, self excited AS440 +1.0% 3 phases, 4 wire Class H IP22 0.8 Double layer concentric Two thirds 12 No load <1.5% 1000 STANDARD FEATURES CONTROL SYSTEM QUALITY STANDARDS n 50°C rated radiator n Powder coated finish n External fuel tank connections n EVAC service points n 110% bunded skid base n All moving parts fitted with safety guards n RCD MCB 2 x 3Ph 63amp 5 pin - IP66 n IP65 electrical boxes dust and water proof n Rated lifting lugs n Emergency E stop n State of the art control system n Remote monitoring n Door safety interlocks The InteliGen ComAp Controller is an easy to use multi-generator loadshare system, designed to synchronise up to 32 generators. The InteliGen ComAp Controller monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition. System alarms are displayed on the LCD screen (multiple language options are available), illuminated LED audible sounder. The IG-NT-GC-MINT-IB-NT is used in conjunction with controllers to provide monitoring and communications data via the InteliGen ComAp Controller advanced communications system. Our generator sets are compliant with all the main standards, such as ISO8528, ISO14000, GB755, BS5000, VDE0530, ISO3046, IEC34-1, AS3000. ASSEMBLY The engine and alternator are closed coupled by means of an SAE flange. A full torsional analysis has been carried out to guarantee no harmful vibration will occur. Anti- vibration pads are affixed between engine alternator feet and base frame. Rubber diagonal isolators are specifically designed to reduce engine and alternator vibration and prevent distortion in the voltage and harmonic output of the generator. All iron and steel surfaces of the canopy fabrication have been sand blasted and then powder coated, which provides an excellent corrosion resistant surface. WARRANTY POLICY 12 months, 1200 hours as per generator. Generators Australia Pty Ltd Warranty Policy. D200/S SPECIFICATIONS 250kVA UNIT Dimensions L x W x H (m) Dry Weight (kg) Sound at 7m/dB 4.2 x 1.7 x 2.2 3284 73 German Technology. Australian Design. Powered by ComAp
Transcript of D200/S SPECIFICATIONS 250kVA - Access Hire Australia · the generator. All iron and steel surfaces...
GENERATORSAUS T R A L I A
www.generatorsaustralia.com.au (08) 6258 4195
GENERAL
ENGINE
ALTERNATOR
ModelPower TypePrime Power (kW/kVA)Standby Power (kW/kVA)
Engine Make and ModelEngine TypeEngine Prime Power (kW)Engine Standby Power (kW)Fuel Tank Capacity (L)Fuel Consumption (L/h)*Battery TypeBore (mm) x Stroke (mm) No. of CylindersDisplacement (L)Compression Ratio Intake ModelSpeed Control SystemLubricating Oil Capacity (L)Lub Consumption (g/kW/h)
*Fuel Consumption is based on 100% load
ModelFrequency (Hz)Continuous Output (kW/kVA)Power EfficiencyTypeExciter TypeVoltage RegulatorVoltage RegulationNo. of PhasesInsulationProtectionRated Power FactorStator WindingWinding PitchWinding LeadsWaveform DistortionAltitude (m)
D200/SDiesel200/250220/275
DEUTZ BF6M1015C-LAG1AWater-cooled, in line, 4 stroke, 1500rpm22825072754.424V132 x 145611.90617Turbo intercoolerElectronical speed governing340.609
SLG274K1, single bearing IP2250200/25091.0%4 pole, rotating fieldBrushless, self excitedAS440+1.0% 3 phases, 4 wireClass HIP220.8Double layer concentricTwo thirds12No load <1.5%1000
STANDARD FEATURES
CONTROL SYSTEM
QUALITY STANDARDS
n 50°C rated radiatorn Powder coated finishn External fuel tank connectionsn EVAC service pointsn 110% bunded skid basen All moving parts fitted with safety guardsn RCD MCB 2 x 3Ph 63amp 5 pin - IP66n IP65 electrical boxes dust and water proofn Rated lifting lugsn Emergency E stopn State of the art control system n Remote monitoring n Door safety interlocks
The InteliGen ComAp Controller is an easy to use multi-generator loadshare system, designed to synchronise up to 32 generators. The InteliGen ComAp Controller monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition. System alarms are displayed on the LCD screen (multiple language options are available), illuminated LED audible sounder.
The IG-NT-GC-MINT-IB-NT is used in conjunction with controllers to provide monitoring and communications data via the InteliGen ComAp Controller advanced communications system.
Our generator sets are compliant with all the main standards, such as ISO8528, ISO14000, GB755, BS5000, VDE0530, ISO3046, IEC34-1, AS3000.
ASSEMBLYThe engine and alternator are closed coupled by means of an SAE flange. A full torsional analysis has been carried out to guarantee no harmful vibration will occur. Anti-vibration pads are affixed between engine alternator feet and base frame. Rubber diagonal isolators are specifically designed to reduce engine and alternator vibration and prevent distortion in the voltage and harmonic output of the generator. All iron and steel surfaces of the canopy fabrication have been sand blasted and then powder coated, which provides an excellent corrosion resistant surface.
WARRANTY POLICY 12 months, 1200 hours as per generator. Generators Australia Pty Ltd Warranty Policy.
D200/S SPECIFICATIONS250kVA
UNIT
Dimensions L x W x H (m)Dry Weight (kg)Sound at 7m/dB
4.2 x 1.7 x 2.2328473
German Technology. Australian Design.Powered by
DSE6020
ComAp
