D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
-
Upload
rycproyectista -
Category
Documents
-
view
221 -
download
0
Transcript of D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
1/15
Novapoint brukermte 2012
AutoCAD Civil-3DNyheter AutoCAD Civil-3D 2013
Tesfaye Kebede Vianova systems
Novapoint brukermte 2012
New Features Civil-3D
Pressure Pipe Network
Volumes Dashboard
Analysis
Data Exchange
Railway Design
Corridor Design
Survey Data Query
Drive Tool
(Visualization)
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
2/15
Novapoint brukermte 2012
Pressure Pipe Network
Design
Novapoint brukermte 2012
Design
Pressure Network - Parts List
New parts list (to organize components and display properties)Assortment of components from a pressure network catalog.
C:\ProgramData\Autodesk\C3D 2013\enu\Pressure Pipes Catalog\Metric\Metric_AWWA_PushOn\IMG
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
3/15
Novapoint brukermte 2012
Establishes both the horizontal location and the initial vertical
information for the pressure network.
Plan view
Design
Profile View
Vertical design of a pressure network has two steps, the initial layout
followed by refinement of that layout.
Novapoint brukermte 2012
Pressure Network from - Water Industry Model
You can create a pressure network
fromwater industry modeldata thatwas created in AutoCADMap 3D.
The data must be stored in anindustry modeldrawing,
Design
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
4/15
Novapoint brukermte 2012
Limitations (Pressure Pipe)
- Datashortcuts or Vault-integration is not possible i 2013
- No connection to/with gravity pipe networks
- No interference checking (Classh control)
- No display in section Views, only in vertical profile
Novapoint brukermte 2012
Volumes Dashboard Boundaries to a Surface
Surface edge triangulation
Analysis
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
5/15
Novapoint brukermte 2012
Analysis
- Calculate volumes multiple volume surfaces and bounded areas.- Save volume information between drawing sessions.- Shows graph of total volumes for multiple surfaces and bounded areas.- Generate a volumes report and Insert a summary into the drawing.
Calculating Volumes - Volumes Dashboard
Used to analyze volume surfaces and bounded areas within surfaces.
Novapoint brukermte 2012
Analysis
Adding Boundaries to a Surface -Hide
Surface boundaries are defined fromClosed polygons, Parcel or
Surfaces.
Surfaces may be selected as boundariesHide boundary type and the
Non-destructive breakline (both selected).
Control surface edge triangulation -Maximum Angle setting
The exterior border of the TIN will beassessed for maximum angle
between adjacent TIN Lines.
Create Surface and VolumesDashboard command settings.
MaximumAngle is set to Yes,
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
6/15
Novapoint brukermte 2012
Autodesk InfrastructureModeller
Survey Data Query
Data Exchange
Novapoint brukermte 2012
Modeler for urban planning design used to create, evaluate andcommunicate infrastructure proposals.
What is Autodesk Infrastructure Modeler
Data Exchange
Exchanging Files Between AutoCAD Civil 3D and Autodesk Infrastructure Modeler
- Bring 2D CAD, GIS, Building Information Modeling (BIM) and raster datainto a 3D model.
- Models from AutoCAD Civil 3D & Map 3D 2012 .
- Create 3D thematic maps to help or inform for the decisions.
- Sketch toolbox for conceptual designs directly into a modeland capture rendered images or recorded videos.
ImportTerrain, coverage area,water area and road centerline toAutodesk Infrastructure Modeler
ExportSurfaces, pipe networks,alignments, and corridorsfrom Civil-3D
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
7/15
Novapoint brukermte 2012
Querying Survey Data
Survey Data
Query a survey database for survey pointsand figures with specified criteria.
Enables you to search a survey
database for the survey points and
figures.
Dynamic reference(Survey database, the surfaceis automatically updated)
Adding Survey Query to a Surface
Survey points and figures in a survey
query can be added to a surfacedefinition using
Static points and figures(Added as point groups andbreaklines)
Novapoint brukermte 2012
Simplified corridor creation
Railway Design Cant Design
Railway & Corridor
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
8/15
Novapoint brukermte 2012
Corridor Editing via Section Editor
Enhanced assembly creation tools
Simplified Create corridor creation workflowSelect Similar to subassemblies of the same type
Automatic adjustment of the section editor gridfrequency when you zoom in or out.
Automatic side detection improved
Simple subassembly insertion/replacement
Simplified Corridor Design
4
2
1
3
Novapoint brukermte 2012
Railway Design - Alignment
Railway alignment
Created using Road Alignment Layout Tools
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
9/15
Novapoint brukermte 2012
Railway Design Terminology
Cant is the change in elevation of rails in the horizontalcurves in a railway (millimeters). (Cant is calculated verysimilarly as the superelevation in Roads). Normallyoutside track is lifted and the inside track stays fixeddepending the speed of the train.
Cant and Cant Defficiency
Theoretical / Equilibrium cant is11.8 * {Design Speed}^2/Radius
(Not applied in most case,trains with different speed use the
same track sometimes)
Cant deficiency is a result whena train speed on a curve is greaterthan the speed for which is modeledfor tolerated limits (or criteria)
Novapoint brukermte 2012
Attainment MethodSpecifies the name ofthe cant attainmentmethod. Click thearrow to display a listof the attainmentmethods associatedwith the specifieddesign criteria file.
Equilibrium CantSpecifies the formula that calculates theelevation of one rail relative to the otherto compensate for lateral forces due tohorizontal curvature.
Maximum Allowable CantDeficiencySpecifies the maximum allowabledifference between equilibriumcant and applied cant.
Applied Cant TableSpecifies the amount bywhich the ballast iselevated or lowered inrelation to the profilegrade line.
Transition LengthTableSpecifies the name ofthe cant transition
length table used tocalculate the transitionstations. Click thearrow to display a listof the transition lengthtables associated withthe specified AppliedCant Table.
Railway Design Cant Design
3
4
5
4
3
5
1 2
1
2
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
10/15
Novapoint brukermte 2012
Railway Design- Editing Cant
Use cant view grips to graphically editcant data on an alignment.
The cant view and the cant tabular
editor are dynamic.
Grip Editing Cant Data
Novapoint brukermte 2012
Limitations (Rail Design)
- Theres only a single subassembly available
and that does not have cant . No new railway
subassembly in the catalog that uses cant
information (You need to make from a
subassembly Composer)
- Export to landxml does not write cant/speed information
- Import landxml does not create railway
alignment, so cant and speed is missing as well
- The railway alignment design might be
used for reconnaissance study.
- Can not be used out of the box as complete
railway design solution
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
11/15
Novapoint brukermte 2012
Drive Tool
Visualization
Novapoint brukermte 2012
Visualization (Drive Tool)
Use this tool to simulate driving through a 3D model by following analignment, profile, feature line, 3D polyline, survey figure, or corridor
feature line.
Drive CommandYou can simulate driving througha 3D model using the Drivecommand.
Specifying Drive SettingsSpecify Drive settings usingcontrols available on the Drivetab in the ribbon.
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
12/15
Novapoint brukermte 2012
Novapoint Civil Tools
NP-Civiltools
Novapoint brukermte 2012
NP-Civiltools
User Interface (Brukergrensesnitt)
Civiltools in Civil-3D environment.
NP-Civitools includes most used functions of NovapointBasis.
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
13/15
Novapoint brukermte 2012
NP-Civiltools
C3D til Novapoint
NP-Civiltools has two main import and export parts.
Novapoint til C3D
Novapoint brukermte 2012
NP-Civiltools
Export of surface (overflate).
NP Civiltools remove the long export prossess and usesLandxml-geometri import direct.
This process will create a file for
surface (overflaten) and the surface will be
imported into NP Basis.
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
14/15
Novapoint brukermte 2012
Brukermte 2011
NP-Civiltools
Exsport Alignment (Senterlinjer)
Alignment export activates the Landxml Alignment exportdialog boxand creates a temporary LandXML file.
Novapoint brukermte 2012
Infrastructure Design Suites 2013
-
8/10/2019 D10_AutoCAD_Civil3D_Nyheter_i_2013_og_Novapoint_Civiltools.pdf
15/15
Novapoint brukermte 2012
Autodesk Infrastructure Design Suite 2013
Civil engineering software combines the tools to plan, design, build, and manage civil and utilityinfrastructure. The Ultimate edition builds on the value of Premium by adding specializedcapabilities for utility network design, structural engineering, and construction coordination.
Utility Design & Civil Engineering Software
Includes:AutoCADAutoCAD Map 3DAutoCAD RasterDesignAutodesk Storm andSanitary AnalysisAutodeskNavisworks Simulate
Includes:AutoCADAutoCAD Map 3DAutoCAD Raster Design
Autodesk Storm and SanitaryAnalysisAutodesk Infrastructure ModelerAutoCAD Civil 3DAutodesk 3ds Max DesignAutoCAD Utility DesignAutodesk Navisworks ManageAutodesk Revit Structure
Includes:AutoCADAutoCAD Map 3DAutoCAD Raster Design
Autodesk Storm and SanitaryAnalysisAutodesk NavisworksSimulateAutodesk Infrastructure ModelerAutoCAD Civil 3DAutodesk 3ds Max Design
Infrastructure Design Suites 2013
Novapoint brukermte 2012
Takk for oppmerksomeheten!!Tesfaye Kebede (Siv.Ing. MS.c.)
Produktansvarlig Civil-3D