D1 DUBNA SKALA TURANY, SO 207 00 AND 209 00 BRIDGE ABUTMENTS

2
CASE HISTORY Rev. 00, No. 1000027-SK, Issue Date 12.07.2014 REINFORCED SOIL STRUCTURES Product: MacRes ® D1 DUBNA SKALA-TURANY, SO 207-00 AND 209-00 BRIDGE ABUTMENTS SLOVAKIA, MARTIN Problem Bridge structure 207-00 is part of the juncon at Marn town, located in the rural area. Bridge structure overspans the motorway D1. In the vicinity of the bridge is located railway line Braslava - Košice. Bridge structure 209-00 is located in the rural area of Marn, near exisng roads III/018254 near Marn. The terrain is flat and is currently being used for agricultural purposes. In the future, it is possible that construcon of industrial zones will be in this area. From the financial and me opmizaon reasons the original reinforced concrete bridge abutments were replaced with the MacRes system. Soluon The reinforced soil wall is formed by precast concrete facing panels of standard size 1,5x1,5 m and a polymer reinforcement—high adhesion polymeric geo strips (GST). Walls are simple with an inclinaon of 90°, without the embankment on top. The bridge beamseat is founded on concrete piles, the wall was built aſter the piles were built. The wings are in variable height, the maximum height is 7.5 m. Length of walls: - Object 207-00: at abutment 1 is 58.5 m, at abutment 2 is 52.6 m. - Object 209-00: at abutment 1 is 37.5 m, at abutment 2 is 37.5 m. During construcon, SO 207-00 Date: October 2012 Client: NATIONAL MOTORWAY AUTHORITY Main contractor: VÁHOSTAV-SK, a.s. MacRes ® - face area 1 100m 2 Construcon info: Consultant: Used product: Construcon start date: DOPRAVOPROJEKT a.s. August 2012 June 2014 Construcon end date: Start of construcon, SO 209-00 Date: September 2012

Transcript of D1 DUBNA SKALA TURANY, SO 207 00 AND 209 00 BRIDGE ABUTMENTS

Page 1: D1 DUBNA SKALA TURANY, SO 207 00 AND 209 00 BRIDGE ABUTMENTS

CASE HISTORY Rev. 00, No. 1000027-SK, Issue Date 12.07.2014

REINFORCED SOIL STRUCTURES Product: MacRes®

D1 DUBNA SKALA-TURANY, SO 207-00 AND 209-00 BRIDGE ABUTMENTS SLOVAKIA, MARTIN

Problem Bridge structure 207-00 is part of the junction at Martin town, located in the rural area. Bridge structure overspans the motorway D1. In the vicinity of the bridge is located railway line Bratislava - Košice. Bridge structure 209-00 is located in the rural area of Martin, near existing roads III/018254 near Martin. The terrain is flat and is currently being used for agricultural purposes. In the future, it is possible that construction of industrial zones will be in this area. From the financial and time optimization reasons the original reinforced concrete bridge abutments were replaced with the MacRes system.

Solution The reinforced soil wall is formed by precast concrete facing panels of standard size 1,5x1,5 m and a polymer reinforcement—high adhesion polymeric geo strips (GST). Walls are simple with an inclination of 90°, without the embankment on top. The bridge beamseat is founded on concrete piles, the wall was built after the piles were built. The wings are in variable height, the maximum height is 7.5 m. Length of walls: - Object 207-00: at abutment 1 is 58.5 m, at abutment 2 is 52.6 m. - Object 209-00: at abutment 1 is 37.5 m, at abutment 2 is 37.5 m.

During construction, SO 207-00 Date: October 2012

Client:

NATIONAL MOTORWAY AUTHORITY

Main contractor:

VÁHOSTAV-SK, a.s.

MacRes® - face area 1 100m2

Construction info:

Consultant:

Used product:

Construction start date:

DOPRAVOPROJEKT a.s.

August 2012

June 2014

Construction end date:

Start of construction, SO 209-00 Date: September 2012

Page 2: D1 DUBNA SKALA TURANY, SO 207 00 AND 209 00 BRIDGE ABUTMENTS

Project section

MACCAFERRI CENTRAL EUROPE s.r.o.

Štverník 662, 906 13 Brezová pod Bradlom

Commercial-technical office: Kopčianska 15, 851 01 Bratislava

Tel.: 02/ 202 400 56, e-mail: [email protected], www.maccaferri.sk

.

MACCAFERRI CENTRAL EUROPE s.r.o. has implemented and applies a quality management system pursuant to the standard EN ISO 9001:2008 certified by TSÚS CERTICOM.

After construction, SO 207-00 Date: June 2014

Typical cross-section - SO 207-00, abutment 1