D00067-7 T6 Controller Configuration String Reference

7/23/2019 D00067-7 T6 Controller Configuration String Reference

1/7

Transponder Technologies Pty Ltd

A.B.N. 82083558178

2 Hamra Drive

Export Park

Adelaide Airport, South Australia 5950

Information contained in this document is subject to change without notice and Transponder Technologiesdoes not guarantee that the content is free of typographical error. No part of this document may bereproduced or transmitted in any form or by any means without the express written permission of

Transponder Technologies.

Document Number D00067 Document Version 7 Number of pages 7

Original File Name D00067-7 T6 Controller Configuration String Reference.docx

T6 Controller

Configuration String Reference


2/7

T6 Controller - Configuration String Reference

Doc No. D00067 Ver 7 COMMERCIAL-IN-CONFIDENCE Page 2 of 7

CHANGE HISTORY

Doc Ver Date Firmware Ver* Change Details

1 18-Jul-07 03024 - First release of new document

2 15-Feb-08 03046

- Added TT3000 Site Monitor to digit A.1- Added XML tank status output to digit A.1- Added XML tank status output to digit B.8- Changed definition of values 2 & 4 in digit B.12

3 13-May-08 03057

- Added RQYS custom behaviour to digit A.8- Added Print settlement report option to digit B.5- Added Drystock entry at TT3000 option to digit B.6- Added Expiry date & grade ignore option to digit B.11- Changed description of option B.4

4 06-Dec-10 03057 - Doc updated to new latest TT template

5 23-Nov-11 05071- Added value 4 to digit A.1

- Updated description of value A.9.86 1-Feb-12 05075 -Added value 3 to digit A6

7 8-Oct-12 05105 -Added POS protocol, container seal prompt

* Version of new firmware build guaranteed to have listed changes in configuration options implemented

but is not necessarily when the change was first implemented.

FEEDBACK

As part of Transponder Technologies Continued Improvement Program we encourage any feedback for

this document to be emailed to: [email protected]

All documentation becomes dated and at Transponder Technologies we are continually evolving our

products and documentation accordingly. Unintentional technical or typographical errors are periodically

corrected in later revisions.

Our current documentation convention is DXXXXX-1, where XXXXX is the document number and

1 is the revision level.

DISCLAIMER

All endeavours have been made to ensure information contained in this document is correct and accurate

at the time of release. Transponder Technologies does not accept liability for any errors, omissions, or theuse of information within this document.

NAVIGATING PDFVERSION OF DOCUMENT

When reading the PDF version of this file using Acrobat Reader, all sections are directly accessible via

the Bookmarks facility of Acrobat Reader to make navigation through the document easier and faster.

Additionally, any cross-reference in the document (where the text reads see section0for example) can

be clicked on to directly move the document directly to the referenced section.


3/7




4/7



1. Configuration String A

Left most digit is number 1, right most digit is number 12. All unused digits should be set to 0.

Digit Value Short Description

1

1 Site totals monitor

2 Transac with PartnerTech keypad/card reader

3 TT3000 or TT4000 DCA

4 Transac with Genovation keypad/card reader

5 FC6000

6 FC6000 with customer display7 FC6000 with receipt printer

8 FC6000 with receipt printer and customer display

2

1 Inhibit no-flow timeout for card transactions

2 Limit to one transaction at a time per card

3 Dollar limit per transaction on local/white cards

4

5

6

7 Litre ration limit on local/white cards

8 Loyalty card mandatory for EFT transactions

9 Suppress rate when printing discount amount on receipt

3

2 Show card fuel totals on shift and date-range reports

3 Show discount totals on shift and date-range reports

4 Show card and discount totals on shift and date-range reports

5 Show card fuel totals for indoor/outdoor terminals

4

2 Print litres only on reports and receipts

3 FC6000 special payment logging mode

5 Disable "Receipt unavailable" message for DCA

6 Disable "Receipt paper low" message for DCA

5

4 Record system snapshot daily at midnight

5 Record system snapshot only when tank dip or pump meter is entered

6 Record system snapshot when OPT EFT PIN-pad settles

7 Prompt to end day when rolling shift on FC6000

8 Prompt to end day and report shift totals from IPT

000000000000

1 12


5/7



6

1 Prompt for dollar preset

2 Prompt for litre preset

3 Big+dual cardbase file mode. Full auditing in second buffer

4 Prompt for litre preset and reject if 0 (=unlimited) entered

5 Big cardbase file mode

6 Dual cardbase file mode

7 Dual cardbase file mode will full auditing in first buffer

9 Very big cardbase file mode

7

1 Prompt for User ID - mask entry

2 Prompt for User ID

3 Prompt for User ID using "Driver ID" message

5 Prompt for User ID. Accept all values entered (i.e. don't validate)

6 Prompt for User ID. Prompt per card.

7 Prompt for User ID using "Present Vehicle ID" message.8 Prompt for User ID using "Present User ID" message.

9 Prompt for User ID using "Present User ID" message beforecard ID prompt.

8

1 Prompt for odometer regardless of access ID flag.

2 Never prompt for odometer regardless of access ID flag.

4 Prompt for work hours.

6 Prompt for vehicle number

7 Prompt for odometer with range checking

9

12 ID reader interfaces via audit printer port

3 Special card number length processing: Starcard=8, PEC=7, Shell=8 digits

5 Special card number length processing: PEC=9 digits

6 Wiegand 27bit format

7 Prompt container seal code

8

9 Authorisation via manual entry of Vehicle number

102 Limited/positive validation mode for (primary) card/access ID list

3 Extended/negative validation mode for (primary) card/access ID list

11

2 FC6000 - do not prompt for method of payment

5 FC6000 - do not allow manual card number entry

6 FC6000 - round currency to nearest 5c and print "Total includes GST" on receipts

7 FC6000 - round currency and mark GST items on receipt with "*"

9 As per value '7' but receipt printing option as per MOP setup rather than prompted

121 Magnetic swipe card reader is Track 1 type

2 Magnetic swipe card reader is Track 2 type


6/7



2. Configuration String BLeft most digit is number 1, right most digit is number 12. All unused digits should be set to 0.

Digit Value Short Description

1

2 EFT receipt header - print line 2 of receipt details



5 EFT receipt header - print all lines of receipt details

2

0 0 decimal places price per unit. 0 decimal places total price.

1 1 decimal places price per unit. 0 decimal places total price.2 2 decimal places price per unit. 1 decimal place total price.



3

0 Volume in 'Litres'

1 Volume in 'Gallons'

2 Handle Chinese variant of Gilbarco dispenser

4

0 Host communications: Standard AT modem

1 Host communications: Port speed locked at 38400 baud. No modem detection or initialisation.2 Host communications: Cybertec modem at 38400 baud.

3 Host communications: Cybertec modem at 57600 baud.

4 Host communications: Port speed locked at 57600 baud. No modem detection or initialisation.

5

1 Old CAS software mode

2 Caltex OPT mode

3 EFT surcharge prompt over-ride

4 Caltex OPT mode with normally closed emergency stop detection circuit

5 T&C prompt for EFT transactions

6 Single pump mode

7 Print settlement report at OPT when EFT PIN-pad settlement occurs.

8 Overwrite undeleted transactions

9 Australian Department Of Defence TT3000SC mode.

6

1 Email Mark 3 console emulation mode at 9600 baud.

2 Gilbarco T24 console emulation mode.

3 Gilbarco T24 console emulation mode with handshaking.

4 Email Mark 3 console emulation mode at 4800 baud.

5

6 Epson combined receipt printer & customer display attached to FC6000

7

8 Authorise pump even if nozzle out.

000000000000

1 12


7/7



9 Epson receipt printer attached to FC6000

7

1 Registered users mode

2 FC6000 PLU mode

3 FC6000 PLU mode with additional field appended to transaction record

4 Epson combined receipt printer & customer display attached to FC6000 (Same as B6=6)

5 Prompt for litre preset and reject if 0 (=unlimited) entered (Same as A6=4)

8

1 Prompt for engine hours

2 Prompt for engine hours with range checking

3 FC6000 satellite card reader/keypad

4 Enable price sign interface - Ausport protocol

5 Quest IPT/gateway

6 iButton reader via serial port for FC6000

7 Enable price sign interface - Bever Innovations protocol

8 Enable interface to USB file transfer hardware - Vinculum protocol/POS protocol (FC6000 only)9 Enabled forecourt communications channel 3 using audit printer port

9

2 Limited/positive validation mode for secondary card/access ID list

3 Extended/negative validation mode for secondary card/access ID list

4 Preclude drystock from being purchased via local card at FC6000

10

1 Dont allow Prepay card transaction if card balance is less than $1.00

2 Prompt for security contact

3 Refueller mode

4 Plant refueller mode5 Handle pumps as if they all have preset valves and support limit messages

6 Refueller mode with single authorisation

7 Deadman switch at CAS mode

8 Bay authorisation mode

9 Email pumps operating Gilbarco protocol

11

1 Ignore expiry date encoded on card

2 Ignore grade restrictions encoded on card

3 Ignore expiry date and grade restrictions encoded on card

12

1 OIML checking FC6000 mode

2 Upsonic UPS via RS232 interface connected to FC6000

3 OIML checking FC6000 mode and Upsonic UPS connected

4 Sola UPS via voltage free contacts connected to FC6000

5 OIML checking FC6000 mode and Sola UPS connected

8 Disallow stacking of sales on FC6000

D00067-7 T6 Controller Configuration String Reference

Documents

Transcript of D00067-7 T6 Controller Configuration String Reference