HOW TO USE REMOTE MANAGEMENT ON D-LINK

ROUTERS

D-LINK TECH SUPPORT1800987893

This D-Link Tech Support article will guide you on how to enable and use Remote Management feature on your D-Link Router.

TOLL FREE NUMBER 1800987893

Follow steps below:

1)Open a web browser from the computer which is connected to the router.2)Enter the IP address of the router. The default IP address should be 192.168.0.1.3)Enter the username and password when prompted.4) Go to TOOLS > ADMINISTRATION.

5)Click on the Enable Remote Management checkbox.6)Enter the port number which you want to use in Remote Admin Port field. D-Link Tech Support suggests you to leave it default if you don’t know about it.7)Now go to STATUS > DEVICE INFO.

D-LINK TECH SUPPORT

8)Note down your IP Address. You will need this and your port number to remotely access your router.9)Save your settings.10)Once your settings are saved, you can access your router remotely by entering the IP address of the router and port number in the web browser of any computer you are using in this format:

D-LINK TECH SUPPORT

TOLL FREE NUMBER 1800987893

If you have any questions or are facing any issues, please contact to D-Link Tech Support. Call on D-Link Tech Support toll free number 1800987893 AUSTRALIA

Remote management is a feature which is used to remotely access the router’s configuration page. You can access your router from anywhere in the world if your router and you both are connected to the internet. This feature will be very handy if you need technical help for managing your network from a tech support, you may want to help someone or you are on the go and want to manage your own network.

TOLL FREE NUMBER 1800987893

CONTACT US

WEBSITE: http://www.support-router.com/au/d-link-support/

BLOG: https://www.icognix.net/blog/routers/using-remote-management-d-link-routers/