D and DL Annular Blowout Preventers · PDF fileD and DL Annular Blowout Preventers In the...
Click here to load reader
Transcript of D and DL Annular Blowout Preventers · PDF fileD and DL Annular Blowout Preventers In the...
TC1001-04 139 © 2004 Cooper Cameron, Cameron Division
D and DL Annular Blowout Preventers
In the unique design of the Cameron DL Annular BOP, closing pressure forces the operating piston
and pusher plate upward to displace the solid elastomer donut and force the packer to close inward.
As the packer closes, interlocking steel reinforcing inserts rotate inward to form a continuous support
ring of steel at the top and bottom of the packer. The inserts remain in contact with each other
whether the packer is open, closed on pipe, or closed on open hole.
Other features of the DL BOP include:
• The Cameron DL BOP is shorter in height than comparable annular preventers.
• Available in dual configuration in certain sizes.
• A quick-release top with a one-piece split lock ring permits quick packer change-out with no
loose parts involved. The design also provides visual indication of whether the top is locked or
unlocked.
• The DL BOP is designed to simplify field maintenance. Components subject to wear are
field-replaceable and the entire operating system may be removed in the field for immediate
change-out without removing the BOP from the stack.
• Twin seals separated by a vented chamber positively isolate the BOP operating system from
well bore pressure. High strength polymer bearing rings prevent metal-to-metal contact and
reduce wear between all moving parts of the operating systems.
• All Cameron DL BOPs are manufactured to comply with NACE specification MR-01-75 for H2S
service.
• A shallow gas bleed port is available in some sizes.
• Packers for DL BOPs have the capacity to strip pipe as well as close and seal on almost any size
or shape object that will fit into the well bore. These packers will also close and seal on open
hole. Popular sizes of the DL BOP are available with high-performance CAMULARTM
annular
packing subassemblies.
• Special stripper packers are available in some sizes to accommodate 6-5/8" pipe/mandrels.
The Cameron DL BOP is available in sizes from 7-1/16” to 21-1/4” and in working pressures from 2000 to
20,000 psi.
TC1001-04 140 © 2004 Cooper Cameron, Cameron Division
D and DL Annular BOP Components
Annular Blowout Preventer Components
ItemNumber
Description Item Number Description
1 Body 43 Stud*
2 Top 44 Nut*
3 Piston 45 Bushing Retaining Screw
4 Inner Cylinder Head 46 Oil Injection Fitting
5 Outer Cylinder Head 47 Lifting Eye*
6 Pusher Plate 50 Support Plate Bearing Ring
7 Donut and Packer** 51 Piston ID Bearing Ring
9 Lock Ring 52 Inner Cylinder OD Bearing Ring
10 Actuator Ring 53 Outer Cylinder ID Bearing Ring
11 Actuator Screw 54 Piston OD Bearing Ring
12 Actuator Screw Bushing 55 Pusher Plate Bearing Ring
13 Outer Cylinder Lock Segment 56 Outer Cylinder ID Wiper Ring
14 Lock Segment Retaining Ring 57 Inner Cylinder OD Wiper Ring
15 Support Plate 58 Inner Cylinder ID Lip Seal
16 Top Trash Seal 59 Inner Cylinder ID Lip Seal
17 Actuator Screw Bearing 60 Inner Cylinder OD Lip Seal
29 Anchor Shackle 61 Piston ID Lip Seal
30 Inner Cylinder Stud 62 Piston OD Lip Seal
31 Inner Cylinder Nut 63 Outer Cylinder ID Lip Seal
32 Stud* 64 Outer Cylinder OD Lip Seal
33 Nut* 65 Outer Cylinder OD Lip Seal
34 Lock Ring Access Port Plug 66 Top ID Lip Seal
35 Hydraulic Port Plug 67 Top OD Lip Seal
36 Pusher Plate Screw 68 Outer Cylinder ID Lip Seal
37 Actuator Ring Stop Screw 69 Inner Cylinder OD Lip Seal
38 Lifting Eye* 75 Inner Cylinder ID Backup Ring*
39 Lifting Eye* 76 Inner Cylinder OD Backup Ring*
40 Lifting Eye* 77 Outer Cylinder ID Backup Ring*
41 Lifting Eye* 78 Top ID Backup Ring*
42 Lifting Eye*
*Not shown on the illustration.
**These items are sold as a subassembly (packer & donut). CAMULARTM
high-performance donuts and packers are available for most
sizes and working pressures of the annular BOP.
A complete replacement kit for seals, bearings and scrapers is available. See pages 153-154 .
TC1001-04 141 © 2004 Cooper Cameron, Cameron Division
D and DL Annular BOP Dimensions and Weights
Comparative Size and Weight Data (All Models Flanged)
Size andWorking Pressure
Height(inches)
Diameter(inches)
Weight(pounds)
Gallons toClose
Gallons toOpen
7-1/16” 3000 psi 23-15/16 27-7/8 2738 1.69 1.39
7-1/16” 5000 psi 25-1/2 27-7/8 2778 1.69 1.39
7-1/16” 10,000 psi 34-7/32 37-3/8 7255 2.94 2.55
7-1/16” 15,000 psi 44-3/4 43-1/4 12,000 6.94 6.12
7-1/16” 20,000 psi 50-3/4 48 17,716 8.38 7.56
11” 3000 psi 32-1/2 41-1/4 8255 5.65 4.69
11” 5000 psi 34-15/16 41-1/4 8447 5.65 4.69
11” 10,000 psi 41-1/16 48-1/2 13,954 10.15 9.05
11" 15,000 psi 62-1/2 61 36,500 23.5 21.3
13-5/8” 3000 psi 36-11/16 52-3/8 12,855 12.12 10.34
13-5/8” 5000 psi 40-3/16 52-3/8 16,215 12.12 10.34
13-5/8” 10,000 psi 49-3/32 61 27,262 18.10 16.15
16-3/4” 3000 psi 47 60-1/2 25,950 22.30 19.00
16-3/4” 5000 psi 49 60-1/2 26,300 22.30 19.00
18-3/4” 5000 psi 60-13/16 62 29,560 35.60 29.00
18-3/4” 10,000 psi 70-1/2 67 40,940 51.00 45.10
20-3/4” 3000 psi 54-3/4 66 29,500 40.50 28.40
21-1/4” 2000 psi 53-5/16 66 29,000 40.50 28.40
21-1/4" 5000 psi 64-27/32 71-11/16 36,000 40.50 28.40
TC1001-04 142 © 2004 Cooper Cameron, Cameron Division
TC1001-04 143 © 2004 Cooper Cameron, Cameron Division
7-1/16” 3000 - 20,000 psi WP D and DL Annular BOPPart Numbers
Item Description
7-1/16”3000and 5000 psi
7-1/16”10,000 psi
7-1/16”15,000 psi
7-1/16”20,000 psi
Qty Part Number Qty Part Number Qty Part Number Qty Part Number
3 Piston 1 699333-01 1 699333-02 1 699333-10 1 699333-11
4 Inner Cylinder Head 1 699334-01-02 1 699334-02-02 1 699334-10 1 699334-11-01
5 Outer Cylinder Head 1 699335-01 1 699335-02 1 699335-10 1 699335-11
6 Pusher Plate 1 699336-01 1 699336-02 1 699336-10 1 699336-11
7 Donut and Packer** 1 644856-02-00-01+ 1 644856-03-00-02+ 1 644856-11+ 1 644856-11+
9 Lock Ring 1 699337-01 1 699337-02 1 699337-10 1 699337-11
10 Actuator Ring 1 699338-01 1 699338-02 1 699338-10 1 699338-11
11 Actuator Screw 4 049089-03 4 049089-01 4 049089-01 4 049089-01
12 Actuator Screw Bushing 4 699343-03 4 699343-01 4 699343-01 4 699343-01
13Outer Cylinder LockSegment
-- --- -- --- -- --- 3 614350-02
14Lock Segment RetainingRing
-- --- -- --- -- --- 1 049416-02
15 Support Plate 1 2010341-01 1 2010341-02 1 2010341-15 1 2010341-11
16 Top Trash Seal 1 046045-19 1 046045-20 1 046045-14 1 046045-10
17 Actuator Screw Bearing 8 644868-03 8 644868-01 8 644868-01 8 644868-01
29 Anchor Shackle 4 701002 4 701003 4 663311-13 4 663311-13
30 Inner Cylinder Stud 8 046037-24 12 046037-16 12 046037-30 12 392002-09-00-70
31 Inner Cylinder Nut 8 049800-01 12 049800-01 12 049800-08 12 049800-03
32 Stud -- --- -- --- -- --- -- ---
33 Nut -- --- -- --- -- --- -- ---
34Lock Ring Access PortPlug
-- -- -- -- 2 005930-07-10 2 005930-07-10
35 Hydraulic Port Plug 2 005930-03-10 2 005930-05-10 2 005930-05-10 2 005930-05-10
36 Pusher Plate Screw 24 046052-04 24 046052-05 24 046052-08 24 046052-08
37 Actuator Ring Stop Screw 4 046052-03 4 046052-01 4 049477-01 4 046052-01
38 Lifting Eye* 4 700734 4 700734 4 012185-03 4 012185-03
39 Lifting Eye* 4 012185-03 4 012185-03 4 012185-02 4 012185-02
40 Lifting Eye* 4 012185-02 4 012185-02 4 700735 4 700735
41 Lifting Eye* 4 700735 4 700735 4 700734 2 700734
42 Lifting Eye* -- --- -- --- -- --- -- ---
*Not shown on the drawing
**These items are sold as a subassembly (packer & donut)
+CAMULAR�
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
TC1001-04 144 © 2004 Cooper Cameron, Cameron Division
7-1/16” 3000 - 20,000 psi WP D and DL Annular BOPPart Numbers
Item Description
7-1/16”3000and 5000 psi
7-1/16”10,000 psi
7-1/16”15,000 psi
7-1/16”20,000 psi
Qty Part Number Qty Part Number Qty Part Number Qty Part Number
43 Stud -- --- -- --- -- --- -- ---
44 Nut -- -- -- --- -- --- -- ---
45 Bushing Retaining Screw 4 005940-01-18 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08
46 Oil Injection Fitting 4 700710 4 700710 4 700710 4 700710
47 Lifting Eye* -- --- 4 012185-01 -- --- -- ---
50 Support Plate Bearing Ring 1 049122-01 1 049122-02 1 049122-07 1 049122-07
51 Piston ID Bearing Ring 1 2010196-13 1 2010196-15 1 2010196-36 1 2010196-32
52 Inner Cyl. OD Bearing Ring 1 2010196-01 1 2010196-03 1 2010196-33 1 2010196-33
53 Outer Cyl. ID Bearing Ring 1 2010196-02 1 2010196-04 1 2010196-34 1 2010196-34
54 Piston OD Bearing Ring 1 2010196-14 1 2010196-16 1 2010196-35 1 2010196-31
55 Pusher Plate Bearing Ring 1 699345-04 1 699345-05 1 699345-08 1 699345-08
56 Outer Cyl. ID Wiper Ring 1 700713 1 700810 1 705151 1 705151
57 Inner Cyl. OD Wiper Ring 1 700715 1 700809 1 705152 1 705152
58 Inner Cylinder ID Lip Seal 1 615851-31-01 1 615850-24-01 1 615850-37-01 1 615850-37-01
59 Inner Cylinder ID Lip Seal 1 615851-32-01 1 615851-26-01 1 615851-35-01 1 615851-37-01
60 Inner Cylinder OD Lip Seal 2 615847-30-01 2 615847-26-01 1 615847-34-01 1 615847-34-01
61 Piston ID Lip Seal 1 615851-33-01 1 615851-27-01 1 615851-36-01 1 615851-36-01
62 Piston OD Lip Seal 1 615847-31-01 1 615847-27-01 1 615847-35-01 1 615847-37-01
63 Outer Cylinder ID Lip Seal 2 615851-30-01 2 615851-25-01 1 615851-34-01 1 615851-34-01
64 Outer Cylinder OD Lip Seal 1 615847-29-01 1 615847-25-01 1 615847-32-01 1 615847-36-01
65 Outer Cylinder OD Lip Seal 1 615847-28-01 1 615847-24-01 1 615847-33-01 -- --
66 Top ID Lip Seal 1 615851-29-01 1 615850-23-01 1 615850-35-01 1 615850-35-01
67 Top OD Lip Seal 1 706258-11 1 706258-04 1 706258-01 1 706258-05
68 Outer Cylinder ID Lip Seal -- --- -- --- 1 615850-36-01 1 615850-36-01
69 Inner Cylinder OD Lip Seal -- --- -- --- 1 615846-26-01 1 615846-26-01
75 Inner Cyl. ID Backup Ring* -- --- -- --- 1 615399-09 1 615378-02
76 Inner Cyl. OD Backup Ring* -- --- -- --- 1 615399-10 1 615622-02
77 Outer Cyl. ID Backup Ring* -- --- -- --- 1 615399-08 1 615378-03
78 Top ID Backup Ring* -- --- -- --- 1 615399-07 1 615378-04
*** Complete Replacement Kit 1 049742-01 1 049742-02 1 049742-13 1 049742-03
*Not shown on the drawing
+CAMULAR�
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
11” 3000 - 15,000 psi WP D and DL Annular BOPPart Numbers
Item Description
11”3000 and 5000 psi
11”10,000 psi
11”15,000 psi
Qty Part Number Qty Part Number Qty Part Number
3 Piston 1 699333-03 1 699333-04 1 699333-38-00-01
4 Inner Cylinder Head 1 699334-27 1 699334-28 1 699334-38-00-01
5 Outer Cylinder Head 1 699335-27 1 699335-28 1 699335-38-00-01
6 Pusher Plate 1 699336-03 1 699336-04 1 699336-38-00-01
7 Donut and Packer** 1 644856-04-00-02+ 1 2231480-28-00-01 1 644800-38-00-01
9 Lock Ring 1 699337-27 1 699337-28 1 699337-38-00-01
10 Actuator Ring 1 699338-27 1 699338-28 1 699338-38-00-01
11 Actuator Screw 4 049089-01 4 049089-01 4 049089-02
12 Actuator Screw Bushing 4 699343-01 4 699343-01 4 699343-02
13 Outer Cylinder Lock Segment 3 614350-03 3 614350-04 3 614350-09
14 Lock Segment Retaining Ring 1 049416-03 1 049416-04 1 049416-10
15 Support Plate 1 2010341-03 1 2010341-07 1 2010341-13
16 Top Trash Seal 1 046045-11 1 046045-12 1 046045-15
17 Actuator Screw Bearing 8 644868-01 8 644868-01 8 644868-02
29 Anchor Shackle 4 701004 4 663311-13 4 663311-13
30 Inner Cylinder Stud 6 046037-17 8 046037-19 12 046037-26
31 Inner Cylinder Nut 6 049800-04 8 049800-05 12 049800-05
32 Stud -- --- -- --- -- --
33 Nut -- --- -- --- -- --
34 Lock Ring Access Port Plug 2 235539-64 2 005930-07-10 2 614271-02
35 Hydraulic Port Plug 2 005930-05-10 2 005930-05-10 2 005930-05-10
36 Pusher Plate Screw 24 046052-06 24 046052-07 24 046052-10
37 Actuator Ring Stop Screw 4 049477-01 4 049477-01 4 046052-01
38 Lifting Eye* 4 011849 4 011849 -- --
39 Lifting Eye* 4 012185-03 4 012185-03 4 012185-03
40 Lifting Eye* 2 012185-01 2 012185-02 4 012185-02
41 Lifting Eye* 4 012185-02 -- --- 4 011849
42 Lifting Eye* 2 700735 -- --- -- --
*Not shown on the drawing
**These items are sold as a subassembly (packer & donut)
+CAMULAR�
TC1001-04 145 © 2004 Cooper Cameron, Cameron Division
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
11” 3000 - 15,000 psi WP D and DL Annular BOPPart Numbers
Item Description
11”3000and 5000 psi
11”10,000 psi
11”15,000 psi
Qty Part Number Qty Part Number Qty Part Number
43 Stud -- --- -- --- -- --
44 Nut -- --- -- --- -- --
45 Bushing Retaining Screw 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08
46 Oil Injection Fitting 2 700594 2 700594 2 700594
47 Lifting Eye* 2 701960 -- --- -- --
50 Support Plate Bearing Ring 1 049122-03 1 049122-04 1 049122-10
51 Piston ID Bearing Ring 1 2010196-17 1 2010196-19 1 2010196-40
52 Inner Cyl. OD Bearing Ring 1 2010196-05 1 2010196-07 1 2010196-58
53 Outer Cyl. ID Bearing Ring 1 2010196-06 1 2010196-08 1 2010196-57
54 Piston OD Bearing Ring 1 2010196-18 1 2010196-20 1 2010196-39
55 Pusher Plate Bearing Ring 1 699345-02 1 699345-06 1 699345-10
56 Outer Cyl. ID Wiper Ring 1 700619 1 700812 1 706452
57 Inner Cyl. OD Wiper Ring 1 700618 1 700811 1 706451
58 Inner Cylinder ID Lip Seal 1 615850-15-01 1 615850-40-01 1 615850-27-01
59 Inner Cylinder ID Lip Seal 1 615850-14-01 1 615850-41-01 1 615850-28-01
60 Inner Cylinder OD Lip Seal 2 615847-17-01 1 615847-38-01 2 615846-21-01
61 Piston ID Lip Seal 1 615851-16-01 1 615851-38-01 1 615850-25-01
62 Piston OD Lip Seal 1 615847-16-01 1 615847-39-01 1 615846-19-01
63 Outer Cylinder ID Lip Seal 2 615851-17-01 1 615851-37-01 2 615850-26-01
64 Outer Cylinder OD Lip Seal 1 615846-03-01 -- --- -- --
65 Outer Cylinder OD Lip Seal 1 615846-04-01 1 615846-27-01 1 615846-20-01
66 Top ID Lip Seal 1 615850-13-01 1 615850-38-01 1 615850-29-01
67 Top OD Lip Seal 1 706258-02 1 706258-03 1 706258-14
68 Outer Cylinder ID Lip Seal -- --- 1 615850-39-01 -- --
69 Inner Cylinder OD Lip Seal -- --- 1 615846-28-01 -- --
75 Inner Cyl. ID Backup Ring* 2 702645-22-21 -- --- 2 702640-32-91
76 Inner Cyl. OD Backup Ring* 4 230266-01-00-16 -- --- -- --
77 Outer Cyl. ID Backup Ring* -- --- -- --- -- --
78 Top ID Backup Ring* -- --- -- --- -- --
*** Complete Replacement Kit 1 049742-09 1 049742-10 -- --
*Not shown on the drawing
+CAMULAR�
TC1001-04 146 © 2004 Cooper Cameron, Cameron Division
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
13-5/8” 5000 - 16-3/4” 5000 psi WPD and DL Annular BOP Part Numbers
Item Description
13-5/8”5000 psi
13-5/8”10,000 psi
16-3/4”3000 and 5000 psi
Qty Part Number Qty Part Number Qty Part Number
3 Piston 1 699333-05 1 699333-06 1 699333-18
4 Inner Cylinder Head 1 699334-05-02 1 699334-30 1 699334-18
5 Outer Cylinder Head 1 699335-05 1 699335-30 1 699335-18
6 Pusher Plate 1 699336-05 1 699336-06 1 699336-18
7 Donut and Packer** 1 644856-06-00-03 1 644856-07-00-01+ 1 644800-18-00-01+
9 Lock Ring 1 699337-05 1 699337-30 1 699337-18
10 Actuator Ring 1 699338-05 1 699338-30 1 699338-18
11 Actuator Screw 4 049089-01 4 049089-02 4 049089-02
12 Actuator Screw Bushing 4 699343-01 4 699343-02 4 699343-02
13Outer Cylinder LockSegment
3 614350-05 3 614350-01 3 614350-07
14Lock Segment RetainingRing
1 049416-05 1 049416-01 1 049416-07
15 Support Plate 1 2010341-05 1 2010341-06 1 2010341-12
16 Top Trash Seal 1 046045-01 1 046045-09 1 046045-08
17 Actuator Screw Bearing 8 644868-01 8 644868-02 8 644868-02
29 Anchor Shackle 4 663311-13 4 663311-13 4 663311-13
30 Inner Cylinder Stud 6 046037-19 12 046037-20 8 046037-25
31 Inner Cylinder Nut 6 049800-05 12 049800-05 8 049800-06
32 Stud -- --- -- --- -- ---
33 Nut -- --- -- --- -- ---
34 Lock Ring Access Port Plug 2 005930-07-10 2 005930-08-10 2 614271-01
35 Hydraulic Port Plug 2 005930-05-10 2 005930-06-10 2 005930-06-10
36 Pusher Plate Screw 24 046052-08 24 046052-09 24 046052-09
37 Actuator Ring Stop Screw 4 046052-01 4 046052-02 4 046052-02
38 Lifting Eye* 4 011849 4 011849 4 011849
39 Lifting Eye* 4 012185-03 4 700649 4 012185-02
40 Lifting Eye* 4 012185-02 2 012185-01 4 012185-01
41 Lifting Eye* -- --- 4 012185-03 4 700446
42 Lifting Eye* -- --- 2 700446 -- ---
*Not shown on the drawing
**These items are sold as a subassembly (packer & donut)
+CAMULAR�
TC1001-04 147 © 2004 Cooper Cameron, Cameron Division
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
13-5/8” 5000 - 16-3/4” 5000 psi WPD and DL Annular BOP Part Numbers
Item Description
13-5/8”5000 psi
13-5/8”10,000 psi
16-3/4”3000 and 5000 psi
Qty Part Number Qty Part Number Qty Part Number
43 Stud -- --- -- --- -- ---
44 Nut -- --- -- --- -- ---
45 Bushing Retaining Screw 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08
46 Oil Injection Fitting 4 700594 2 700594 2 700594
47 Lifting Eye* -- --- -- --- -- ---
50 Support Plate Bearing Ring 1 049122-05 1 049122-06 1 049122-08
51 Piston ID Bearing Ring 1 2010196-21 1 2010196-23 1 2010196-38
52 Inner Cyl. OD Bearing Ring 1 2010196-09 1 2010196-11 1 2010196-25
53 Outer Cyl. ID Bearing Ring 1 2010196-10 1 2010196-12 1 2010196-26
54 Piston OD Bearing Ring 1 2010196-22 1 2010196-24 1 2010196-37
55 Pusher Plate Bearing Ring 1 699345-01 1 699345-03 1 699345-07
56 Outer Cyl. ID Wiper Ring 1 700320 1 700319 1 700994
57 Inner Cyl. OD Wiper Ring 1 700581 1 700320 1 700993
58 Inner Cylinder ID Lip Seal 1 615850-21-01 1 615850-32-01 1 615850-44-01
59 Inner Cylinder ID Lip Seal 1 615850-20-01 1 615850-33-01 1 615850-45-01
60 Inner Cylinder OD Lip Seal 2 615847-22-01 1 615847-40-01 2 615846-27-01
61 Piston ID Lip Seal 1 615851-23-01 1 615850-30-01 1 615850-46-01
62 Piston OD Lip Seal 1 615847-21-01 1 615846-22-01 1 615846-29-01
63 Outer Cylinder ID Lip Seal 2 615851-24-01 2 615850-31-01 1 615850-43-01
64 Outer Cylinder OD Lip Seal 1 615846-10-01 1 615846-23-01 -- ---
65 Outer Cylinder OD Lip Seal 1 615846-11-01 1 615846-24-01 -- --
66 Top ID Lip Seal 1 615850-19-01 1 615850-34-01 1 615850-42-01
67 Top OD Lip Seal 1 706258-07 1 706258-10 1 706258-09
68 Outer Cylinder ID Lip Seal -- --- 1 615851-28-01 -- ---
69 Inner Cylinder OD Lip Seal -- --- 1 615846-25-01 -- ---
75 Inner Cyl. ID Backup Ring* -- --- -- --- -- ---
76 Inner Cyl. OD Backup Ring* -- --- -- --- -- ---
77 Outer Cyl. ID Backup Ring* -- --- -- --- -- ---
78 Top ID Backup Ring* -- --- -- --- -- ---
*** Complete Replacement Kit 1 049742-06 1 049742-12 1 049742-08
*Not shown on the drawing
+CAMULAR�
TC1001-04 148 © 2004 Cooper Cameron, Cameron Division
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
18-3/4” 5000 - 18-3/4" 10,000 psi WPD and DL Annular BOP Part Numbers
Item Description
18-3/4”5000 psi
18-3/4”10,000 psi
Qty Part Number Qty Part Number
3 Piston 1 699333-44 1 699333-21
4 Inner Cylinder Head 1 699334-44 1 699334-21
5 Outer Cylinder Head 1 699335-44 1 699335-21
6 Pusher Plate 1 699336-44 1 699336-21
7 Donut and Packer** 1 2231480-09-00-01 1 644856-01-00-01+
9 Lock Ring 1 699337-44 1 699337-21
10 Actuator Ring 1 699338-44 1 699338-21
11 Actuator Screw 4 049089-04 4 049089-02
12 Actuator Screw Bushing 4 699343-04 4 699343-02
13 Outer Cylinder Lock Segment 3 614350-13 3 614350-06
14 Lock Segment Retaining Ring 1 049416-09 1 049416-06
15 Support Plate 1 2010341-17 1 615483-01
16 Top Trash Seal 1 046045-22 1 046045-16
17 Actuator Screw Bearing 8 644868-02 8 644868-02
29 Anchor Shackle 4 663311-13 4 663311-13
30 Inner Cylinder Stud 16 046037-32 16 046037-27
31 Inner Cylinder Nut 16 049800-07 16 049800-07
32 Stud -- --- -- ---
33 Nut -- --- -- ---
34 Lock Ring Access Port Plug 2 614271-02 2 614271-01
35 Hydraulic Port Plug 2 005930-06-10 2 005930-07-10
36 Pusher Plate Screw 24 046052-14 24 644535-01
37 Actuator Ring Stop Screw 4 046052-02 4 046052-02
38 Lifting Eye* 4 011849 4 011849
39 Lifting Eye* 4 700649 4 700649
40 Lifting Eye* 2 012185-03 1 615484-01^
41 Lifting Eye* 4 012185-02 4 012185-02
42 Lifting Eye* -- --- -- ---
*Not shown on the drawing
**These items are sold as a subassembly (packer & donut)
***Exploded view is not representative of this assembly
+CAMULAR�
^Wear Plate - Not Lifting Eye
TC1001-04 149 © 2004 Cooper Cameron, Cameron Division
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
18-3/4” 5000 - 18-3/4” 10,000 psi WPD and DL Annular BOP Part Numbers
Item Description
18-3/4”5000 psi
18-3/4”10,000 psi
Qty Part Number Qty Part Number
43 Stud -- --- -- ---
44 Nut -- --- -- ---
45 Bushing Retaining Screw 4 702514-25-20-08 4 702514-25-20-08
46 Oil Injection Fitting 4 700594 2 700594
47 Lifting Eye* -- --- -- ---
50 Support Plate Bearing Ring 1 049122-11 1 615482-01
51 Piston ID Bearing Ring 1 2010196-49 1 2010196-29
52 Inner Cyl. OD Bearing Ring 1 2010196-50 1 2010196-47
53 Outer Cyl. ID Bearing Ring 1 2010196-51 1 2010196-48
54 Piston OD Bearing Ring 1 2010196-52 1 2010196-30
55 Pusher Plate Bearing Ring 1 699345-14 1 699345-13
56 Outer Cyl. ID Wiper Ring 1 708000 1 705710
57 Inner Cyl. OD Wiper Ring 1 708003 1 705711
58 Inner Cylinder ID Lip Seal 1 615851-01-01 1 615851-02-01
59 Inner Cylinder ID Lip Seal 1 615850-04-01 1 615850-08-01
60 Inner Cylinder OD Lip Seal 2 615846-05-01 2 615846-16-01
61 Piston ID Lip Seal 1 615850-03-01 1 615850-09-01
62 Piston OD Lip Seal 1 615846-01-01 1 615846-15-01
63 Outer Cylinder ID Lip Seal 2 615850-02-01 2 615850-07-01
64 Outer Cylinder OD Lip Seal 1 615846-02-01 -- ---
65 Outer Cylinder OD Lip Seal 1 615850-01-01 1 615846-14-01
66 Top ID Lip Seal 1 706258-13 1 615850-01-01
67 Top OD Lip Seal 1 702645-32-91 1 2724543-01
68 Outer Cylinder ID Lip Seal -- -- -- ---
69 Inner Cylinder OD Lip Seal -- -- -- ---
75 Inner Cyl. ID Backup Ring* -- -- 2 702645-32-91
76 Inner Cyl. OD Backup Ring* -- -- -- ---
77 Outer Cyl. ID Backup Ring* -- -- -- ---
78 Top ID Backup Ring* -- -- 1 615378-01
*** Complete Replacement Kit 1 049742-16 1 049742-17
TC1001-04 150 © 2004 Cooper Cameron, Cameron Division
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
TC1001-04 151 © 2004 Cooper Cameron, Cameron Division
20-3/4” 3000 - 21-1/4” 5000 psi WPD and DL Annular BOP Part Numbers
Item Description
20-3/4” ***3000 psi
21-1/4” ***2000 psi
21-1/4” ***5000 psi
Qty Part Number Qty Part Number Qty Part Number
3 Piston 1 699333-47-00-02 1 699333-47-00-02 1 699333-47-00-02
4 Inner Cylinder Head 1 699334-47 1 699334-47 1 699334-47-00-02
5 Outer Cylinder Head 1 644172-01-00-02 1 644172-01-00-02 1 644172-01-00-02
6 Pusher Plate 1 699336-47-00-02 1 699336-47-00-02 1 699336-47-00-02
7 Donut and Packer** 1 644800-47-00-02+ 1 644800-47-00-02+ 1 2231480-48
9 Lock Ring -- --- -- --- -- --
10 Actuator Ring -- --- -- --- -- --
11 Actuator Screw -- --- -- --- -- --
12 Actuator Screw Bushing -- --- -- --- -- --
13 Outer Cylinder Lock Segment -- --- -- --- -- --
14 Lock Segment Retaining Ring -- --- -- --- -- --
15 Support Plate 1 2010341-18 1 2010341-18 1 2010341-18
16 Top Trash Seal -- --- -- --- -- --
17 Actuator Screw Bearing -- --- -- --- -- --
29 Anchor Shackle 4 663311-13 4 663311-13 4 663311-13
30 Inner Cylinder Stud 16 046037-34 12 046037-34 16 046037-34
31 Inner Cylinder Nut 16 049800-12 12 049800-12 16 049800-12
32 Stud 20 005919-08-10 24 006306-16-10 20 219067-18-11-51
33 Nut 20 270900-18-09 24 2709000-15-09 20 2709000-18-01
34 Lock Ring Access Port Plug 2 005930-06-10 2 005930-16-10 2 005930-06-10
35 Hydraulic Port Plug -- --- -- --- -- --
36 Pusher Plate Screw 24 046052-15 24 046052-15 24 046052-15
37 Actuator Ring Stop Screw 4 046052-16 4 046052-16 16 046052-16
38 Lifting Eye* 2 700649 2 700649 2 700649
39 Lifting Eye* 2 012185-02 4 012185-02 2 012185-02
40 Lifting Eye* -- --- -- --- -- --
41 Lifting Eye* -- --- -- --- -- --
42 Lifting Eye* -- --- -- --- -- --
*Not shown on the drawing
**These items are sold as a subassembly (packer & donut)
***Exploded view is not representative of this assembly
+CAMULAR�
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
20-3/4” 3000 - 21-1/4” 5000 psi WPD and DL Annular BOP Part Numbers
Item Description
20-3/4” ***3000 psi
21-1/4” ***2000 psi
21-1/4” ***5000 psi
Qty Part Number Qty Part Number Qty Part Number
43 Stud 36 615447-01-10 24 615447-02-10
44 Nut 36 2709000-19-09 24 2709000-19-09 36 2011346-26-05
45 Bushing Retaining Screw -- --- -- --- 36 2011924-01
46 Oil Injection Fitting -- --- -- --- -- --
47 Lifting Eye* -- --- -- --- -- --
50 Support Plate Bearing Ring 1 049122-12 1 049122-12 1 049122-12
51 Piston ID Bearing Ring 1 2010196-53 1 2010196-53 1 2010196-53
52 Inner Cyl. OD Bearing Ring 1 2010196-54 1 2010196-54 1 2010196-54
53 Outer Cyl. ID Bearing Ring 1 2010196-55 1 2010196-55 1 2010196-55
54 Piston OD Bearing Ring 1 2010196-56 1 2010196-56 1 2010196-56
55 Pusher Plate Bearing Ring -- --- -- --- -- --
56 Outer Cyl. ID Wiper Ring 1 708843 1 708843 1 708843
57 Inner Cyl. OD Wiper Ring 1 615399-12 1 615399-12 1 615399-12
58 Inner Cylinder ID Lip Seal 1 615851-03-01 1 615851-03-01 1 615851-03-01
59 Inner Cylinder ID Lip Seal 1 615851-03-01 1 615850-12-01 1 615850-12-01
60 Inner Cylinder OD Lip Seal 1 615850-12-01 1 615846-18-01 2 615846-18-01
61 Piston ID Lip Seal 1 615850-11-01 1 615850-11-01 1 615850-11-01
62 Piston OD Lip Seal 1 615846-17-01 1 615846-17-01 1 615846-17-01
63 Outer Cylinder ID Lip Seal -- --- -- --- -- --
64 Outer Cylinder OD Lip Seal -- -- -- --
65 Outer Cylinder OD Lip Seal 2 615850-10-01 2 615850-10-01 2 615850-10-01
66 Top ID Lip Seal -- --- -- --- -- --
67 Top OD Lip Seal -- --- -- --- -- --
68 Outer Cylinder ID Lip Seal -- --- -- --- 2 2752121-20-22
69 Inner Cylinder OD Lip Seal -- --- -- --- -- --
75 Inner Cyl. ID Backup Ring* -- --- -- --- -- --
76 Inner Cyl. OD Backup Ring* -- --- -- --- -- --
77 Outer Cyl. ID Backup Ring* -- --- -- --- -- --
78 Top ID Backup Ring* -- --- -- --- -- --
*** Complete Replacement Kit 1 049742-18 1 049742-18
TC1001-04 152 © 2004 Cooper Cameron, Cameron Division
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
DL Annular BOP Replacement Part Kits
For popular size DL BOPs, a BOP replacement parts kit is available to provide allseals, bearings and scrapers required during normal maintenance.
Kit parts are shrink-film packed to prevent loss and assure long shelf life and are lessexpensive than individual parts. All parts in each kit are identified with part num-bers and parts list index numbers.
As an optional replacement for the standard lip seal design, a D-shaped seal is avail-able for service in annular BOPs that have pitted, corroded or oversized seal grooves.To enhance the performance life of the used annular BOP, this seal design will fillmost voids created by excessive wear and tear to the seal groove. Seal kits have beencreated which include all the operating system seals for the annular BOPs listed be-low.
Annular BOP Replacement Part Kit Part Numbers
BOP Size Pressure Rating (psi) Replacement Kit “D” Seal Kit
7-1/16” 3000, 5000 049742-01 ---
7-1/16” 10,000 049742-02 ---
7-1/16” 15,000 049742-13 ---
7-1/16” 20,000 049742-03 ---
11” 3000, 5000 049742-09 ---
11” 10,000 049742-10 ---
11" 15,000 049742-14 ---
13-5/8” 5000 049742-11 2010006-01
13-5/8” 10,000 049742-12 2010006-05
16-3/4” 3000, 5000 049742-08 ---
18-3/4” 5000 049742-16 2010006-04
18-3/4" (Dual) 5000 049742-16-01 2010006-04
18-3/4” 10,000 049742-17 2010006-03
20-3/4” 3000 049742-18 ---
21-1/4” 2000 049742-18 ---
21-1/4" 5000 049742-18 ---
TC1001-04 153 © 2004 Cooper Cameron, Cameron Division
Replacement Part Kit Components
ItemNumber
Quantity Description
16 1 Top Trash Seal
17 8 Actuator Screw Bearing
50 1 Inner Cylinder Head Ring
51 1 Bearing
52 1 Bearing
53 1 Bearing
54 1 Bearing
55 1 Wear Ring
56 1 Wiper Ring
57 1 Wiper Ring
58 1 Seal Ring
59 1 Seal Ring
60 2 Seal Ring
61 1 Seal Ring
62 1 Seal Ring
63 2 Seal Ring
64 1 Seal Ring
65 1 Seal Ring
66 1 Seal Ring
67 1 Seal Ring
TC1001-04 154 © 2004 Cooper Cameron, Cameron Division
TC1001-04 155 © 2004 Cooper Cameron, Cameron Division
Annular Stripper Packer
Cameron’s Stripper Packer is designed to permit stripping of a 6-5/8” drill pipe andtool joint through the Cameron DL Annular. To accomplish the stripping function,the packer metal inserts tips have been cut back to allow the drill pipe to passthrough the closed packer without contacting the metal inserts. This special packeris not rated for 10,000 psi service on any size drill pipe because the tops of theanti-extrusion inserts have been cut back. Because this is a special service packing el-ement, it is not tested in accordance with API 16A.
Annular BOP Stripper Packer
BOP Size Pressure Rating (psi) Stripper Packer
18-3/4" 10,000** 2164645-01
**Packer is designed for the 18-3/4" 10,000 DL Annular, but is not rated for 10,000 psi service.
Pressure testing of the packing element is limited to 5000 psi on 5" and 6-5/8" drill pipe mandrels.
Severe Service Annular Packer
Cameron’s Severe Service Annular Packing element subassemblies are designed forelevated temperatures (maximum of 250 degrees F.) and up to 35% H2S. The severeservice packers/donuts are molded using CAMLAST elastomers. Limited sizes andworking pressure are available.
Severe Service Annular BOP Packer/Donut Subassembly
BOP Size Pressure Rating (psi) Stripper Packer
13-5/8" 5000 644906-06-00-01
Higher Temperatures
For temperatures greater than 250OF, and high H2S levels, CAMULAR severe serviceelastomer is recommended. The DL Annular BOP packing element comes only as acomplete subassembly, which includes packer and donut. Contact your localCameron representative for details. CAMULAR part numbers are listed on pages129-136. Please contact your local Cameron Representative for severe service packerinformation.