CYMOD AND ADAM REMOTE DAS M New CYMOD 7000...

CYMOD™ AND ADAM ™ REMOTE DAS MODULES

156IND

EXN

EWPR

OD

UCT

SM

OTI

ON

CON

TRO

LG

PIB

SER

IAL

/CO

MM

UN

ICAT

ION

SAN

ALO

GO

UTP

UT

( D/ A

)D

IGIT

AL

I/O

REM

OTE

/MO

DU

LAR

DAT

AAC

QU

ISIT

ION

www.cyberresearch.com Toll-Free Assistance: 1-800-341-2525 (USA) Tel: 203-483-8815 Fax: 203-483-9024Visit our website for detailed product information! Applications Engineers: Monday – Friday, 9:00 AM – 5:00 PM, U.S. Eastern Time • e-mail: [email protected]

New CYMOD 7000 Modules Add Displays, New RTDs

Our CyMOD Modules feature integral DIN-rail

mounting hardware

Our CyMOD Modules feature integral DIN-rail

mounting hardware

Serial/EthernetConvertersEthernet Switches

Steel Wall-MountingBracketIncluded

Steel Wall-MountingBracketIncluded

You canpiggyback

modulesto save

wall space

You canpiggyback

modulesto save

wall space

Serial/EthernetConvertersEthernet Switches

ADAM 4570(see page 194)

CM ENC: mountup to 16 CYMOD orADAM modules in

one convenientprotectiveenclosure

(see p.158)

Fiber-opticmodel alsoavailable!CM ENC16CM ENC16

CyberResearch’s line of smart remotedata-acquisition modules has beenexpanded with over 30 new modules inthe CYMOD 7000 series. These new unitsextend the capabilities of traditionalCYMOD and ADAM 4000 lines (see yellowbox on page 157 and detailed writeupson pages 158, 159, and 195).

All three series have on-board micro-processors, each encased in a ruggedindustrial-grade plastic casing to surviveharsh plant and laboratory environments.Their built-in intelligence lets them act asdirect links to a wide variety of sensors,providing signal conditioning, analog anddigital I/O, data display, and RS-232/422/485 communication, with USB andEthernet capabilities, too.

Versatility, Simplicity, and Safety• Modules talk on a twisted pair for

serial data. Two-wire RS-232/422/ 485technology keeps the number ofcables, connectors, repeaters, andfilters to a minimum, simplifyinginstallation and reducing cost.

• Standardize on one module type tohandle most measurement needs fora whole plant. As an example, theCM 7019R module accepts fivemillivolt ranges, four voltage ranges,one current range, and direct inputfrom 11 different thermocouples.Other models are equally versatile.

• Printable ASCII characters formodule commands let you writeapplications in any high-level languagethat supports ASCII string functions.You can use virtually any PC to manageyour remote module network.

• Easy mounting to DIN rails or panel-mount anywhere. Modules can piggy-back for tight spaces, and use ourplastic enclosures to place moduleswherever you need them.

• Removable screw terminal blocksmake wiring and field maintenance easy:leave your wiring intact while connectingor disconnecting modules. Terminalsaccept 1 #12AWG or 2 #14~22AWG wires.

• Use unregulated 10~30VDC power forany of these modules. If you don’t have apower source in that range, power supplieslike our CM 243 (pp. 158 & 161) provide24 VDC from AC sources up to 264 V.

• Watchdog timer circuits in CYMOD andADAM modules reset them automaticallyin the event of system failure.

RS-485 Multi-Drop NetworkingAll CYMOD and ADAM modules use the

EIA RS-485 communication protocol. Inter-face modules let you connect to RS-232/422, USB, and Ethernet networks. Allmodules use optical isolators to preventground-loop problems and limit damagefrom power surges. Many also includeovervoltage protection at levels to 240VRMS.

RS-485 Converters & Repeaters:Control via RS-232, Ethernet, or USBIf no RS-485 interface is available on

the host computer, you can use an RS-232/485 Converter Module (7520 or 4520) totranslate standard RS-232 signals into fullyisolated RS-485 signals while adding pro-tection against voltage spikes. Our CM 7560and 7188 series of modules make it easyto communicate with your modules viaaddressable Ethernet or a USB port (p. 195).

Both the converter and repeatermodules automatically control the RS-485bus direction without external handshakingsignals from the host.

The CM 7520s support up to 256modules, CM 4520 supports up to 128,and the ADAM 4520 supports up to 32.Our new CM 7510 repeaters support upto 2048 modules on an RS-485 bus.

Analog InputOur remote modules have the ability to

acquire multiple types and ranges ofanalog signals. You select the type andrange remotely by issuing commands fromthe host computer. Hands-on adjustmentsare unnecessary.

Our new CM 7000 series of analoginput modules expands the range ofthermocouples and RTD devices you canattach. Some of the new models even letyou employ a mix of single-ended anddifferential inputs on a single module.

Analog OutputThe 7021, 4021, and 4024 analog

output modules supply an analogvoltage or current output with 12-bitresolution. Our new CM 7024 modelincreases D/A resolution to 14 bits.

Counter/Frequency InputThe 4080 has two 32-bit counter

channels and a programmable timerfor frequency measurement. Many ofthe CM 7000 series of DIO modulesallow you to use some or all of theirinput channels as 16-bit counters.

Digital I/O & Relay OutputSeveral Digital I/O modules are

available, with 4 to 28 digital I/O lines.The digital outputs are open-collectortransistor switches — perfect for solid-state relays. Isolated digital I/O modulescan monitor or control voltages to 40VDC

or 250VAC directly (see charts on the nextfour pages for specs). Our relay outputmodules provide 4, 7, or 8 relay channels,which is highly useful for the direct on/offcontrol of real-world devices.

New Models Under DevelopmentIf we don’t appear to have a module that

fits your application’s requirements,please call us — we continue to developnew models with new capabilities to meetcustomer needs. Visit our website for thelatest models and full specifications.

v22AMay2006

© Copyright 2006, CyberResearch, Inc., Branford, CT USA All Rights Reserved. CyberResearch® is a registered trademark of CyberResearch, Inc. All trademarks & trade names used herein are the property of their respective holders. Prices subject to change without notice.

IND

EXN

EWP

RO

DU

CTSREMOTE / MODULAR DATA ACQUISITION

157

MO

TION

CO

NTR

OL

GPIB

SER

IAL/C

OM

MU

NIC

ATION

SA

NA

LOG

OU

TPU

T(D

/A )D

IGITA

LI /O

REM

OTE/M

OD

ULA

RD

ATAA

CQ

UIS

ITION

Toll-Free Assistance: 1-800-341-2525 (USA) Tel: 203-483-8815 Fax: 203-483-9024 www.cyberresearch.comApplications Engineers: Monday – Friday, 9:00 AM – 5:00 PM, U.S. Eastern Time • e-mail: [email protected] Visit our website for detailed product information!

& Addressable Ethernet to Remote Intelligent DAQ Line

For Comparison Charts, see pp. 158~161

Customer requests have per-suaded us to add more than 30 newCYMOD 7000 remote modular DASmodules to our lineup! Now match-ing a module to the detailed require-ments of your application is mucheasier than it ever has been.

New A/D, D/A & DIO LinesOur line of CyMOD analog input

models now includes two new8-input models, expanded thermo-couple and RTD ranges, plusexpanded strain-gauge support.There are two new analog-outputmodules with programmablepower-on values & output slopes.Twelve new digital I/O moduleshave inputs that can also be usedas 16-bit counters, outputs thatsupport up to 100mA per channel(or relays for AC power), and LEDsthat show I/O and relay status.

Ethernet, USB, & Serial ConvertersTo make use of modern

Ethernet and USB 2.0 buses, we’veadded eight new converter modules(see pg. 195). New isolated serialconverters and repeaters help youmix and match RS-232/422/485signals. You can place up to 256modules on one RS-485 twistedpair without a repeater or as manyas 2048 modules on one RS-485bus with repeaters.

CM 7188 Ethernet to serialconverter modules include one toseven RS-232 ports. In addition tocommunicating with your networkof RS-485 modules, they canassign a unique address to eachRS-232 device. That means yourPC can both send a command to aspecific RS-232 device and receivea response.

They aren’t technically CYMODmodules, but our two new Ether-net switches (pg. 19) let each con-nected device communicate at itsown speed without affecting thespeed of other attached devices.

Advanced CYMOD 7000 FeaturesSelected features of our new

CYMOD 7000 series include:

• Up to 5000VRMS isolation voltagewith additional overvoltageprotection as high as ±240V.

• Faster A/D modules that can giveyou 16 bits of resolution at 10 S/sor 12 bits at 60 or 100 S/s.

• Up to 2048 modules via CYMODconverter and repeater modules

• Free DASYLab® & ActiveX™ drivers,plus OCX, DDE, and DLL libraries.

• Powered from unregulated10~30VDC.

CYMOD 4000 Series UntouchedOur CM 7000 series is an

enhancement to our 4000 seriesmodules. All our CYMOD 4000 andADAM 4000 models remain available.

Industry Standard CompatibilityAll three modules series can be

used together. CYMOD and ADAM4000 modules perform the samefunctions, and are designed to beboth hardware and software-compatible. Our CYMOD 7000series closely follows the othertwo, but with a newer case design.

All three series are the samesize, and can be wall, DIN-rail, orpiggyback-mounted (on top of eachother) in much the same way. How-ever, 7000 models and 4000 modelsdo not piggyback on each other.All three series feature removablescrew terminals.

All three lines offer signalconditioning, DAQ, and control.CYMOD modules can be seamlesslyintegrated into an existing ADAMsystem to provide cost savings.

Our new CM ENC06 & CM ENC16enclosures mount both CYMOD andADAM modules (see picture at thebottom of the facing page).

Compare SpecificationsThere can be minor specification

differences between CYMOD modulesand their ADAM counterparts. Thedetailed specifications charts onpages 158~159 make it easy tocompare the new CM 7000 series withearlier CYMOD & ADAM 4000 seriesmodels shown on pages 160~161.

Advanced CYMOD 7000 ModulesJoin Tried-and-True CYMOD 4000 Series Our new CM 7000 series of modules come with

a complete set of DLLs for Win32, Borland®

C/C++, Delphi®, VB5, VC5, DASYLab, ActiveX(OCX), and DDE Server. Utility software is alsoincluded for Windows® 98/2000/NT/XP. Theseintelligent modules are easily controlled via anASCII-format request/reply protocol.

Several software options are available for usewith our CM 4000 series of data-acquisitionmodules. Included at no additional cost isCyberResearch’s CM DLL Windows-compatibleDynamic Link Library for these modules.Outstanding features include:

• 32-bit device drivers to take full advantageof Windows 95/98/2000/NT/XP

• A complete set of Visual C/C++ and VisualBasic example programs to clarify the use ofeach function.

In addition, there are three optional softwarepackages that have won praise from our usersfor their ease of use and intuitive operation.DAQBench™ is a Windows 95/98/2000/NT/XPlibrary of 32-bit ActiveX controls written for ourCyMOD 4000 series. GeniDAQ® is a menu-drivendata acquisition package, while ADAMView is acost-effective and simple DAQ software package.Both GeniDAQ & ADAMView are for ADAM modules.

DAQBench is a 32-bit library of ActiveX controlsfor CYMOD 4000 modules. It enables you tocreate easy-to-use customized data acquisitionprograms by simply dragging and droppingobjects (see pg. 145 for more information).

• Useful user-interface controls and controls fordigital, analog, and timing I/O operations

• An Analysis Library featuring a complete setof analysis functions to help you convert yourraw data into meaningful results

#PCI DAQB DAQBench for CYMOD 4000 Series....$495

GeniDAQ® is an easy-to-use menu-driven dataacquisition and control software package, speci-fically designed for use with our ADAM 4000series modules and PCL-series cards.

#PCL GENIE GeniDAQ for ADAM 4000 Series ........$825

ADAMView is especially designed for use inlow-volume ADAM 4000 series module projects.It includes a database for 150 physical points,ADAM drivers, and OPC Server for monitoring andcontrol. It provides a variety of graphical wizardsso you can quickly create an intuitive operatorinterface. Built-in display objects includehistorical trending, bar graphs, sliders, and more.

#ADAM VIEW DAQ software for ADAM 4000 Series ..$195

Complete Software Support

CM 7018BLCM 7018BL

Up to 3.2 GHz P4 with 21" LCD!High-powered Pentium® 4 PCs ruggedenough for the toughest shop floor.Powerful enough for the toughestapplications. Ideal for plant-floor

control networks (pp. 26~27).

CyRAQ ® Panel PC

v22AMay2006


ADVANCED CYMOD™ 7000 SERIES REMOTE MODULAR DAS

158IND

EXN

EWPR

OD

UCT

SM

OTI

ON

CON

TRO

LG

PIB

SER

IAL

/CO

MM

UN

ICAT

ION

SAN

ALO

GO

UTP

UT

( D/ A

)D

IGIT

AL

I/O

REM

OTE

/MO

DU

LAR

DAT

AAC

QU

ISIT

ION


Part Number NotesVolta

ge In

put R

ange

sCu

rrent

Inpu

ts

Sens

or In

puts

Inpu

t Im

peda

nce

(Ω)

Anal

og O

utpu

t Cha

nnel

s

Anal

og O

ut R

esol

utio

n(b

its)

Volta

ge O

utpu

t Ran

ges

Curre

nt O

utpu

t Ran

ge

Wat

chdo

g Ti

mer

Mod

ule

Type

Tota

l Cha

nnel

s

Max

imum

Sam

ple

Rate

Reso

lutio

n(b

its)

Diffe

rent

ial I

nput

s

Sing

le-E

nded

Inpu

ts

Disp

lay

digi

ts o

r # o

f LED

s

Powe

r Con

sum

ptio

n(W

atts

)

Max

. RS-

485

Baud

Rat

e

Isol

atio

n

Pric

e

CM 7000 SeriesRemote DAS Modules:CYMOD Comparison Chart

Quantities of a single item per shipment. Call for details.QUANTITY DISCOUNTS: 1-4: LIST 5-9: 5% 10-24: 10% 25+: CALL

Rugged New CYMOD DIN-Mount DC-Powered Modules

CM Series Serial Converters & Repeaters

Our CM 7510 repeater(left) isolates RS-422 orRS-485 inputs andrepeats them in thesame protocol as wellas auto-selecting outputspeeds up to 115.2kbps.

CM 7520 converters(right) convert short-distance RS-232 inputsto long-distance RS-422or RS-485 outputs.

The new CYMOD™ 7000 Series makes it easy to expandand extend your network over 4000 ft. for centralized controland coordination of every device in your plant or laboratory.

Specific advantages include:•Automatic speed adjustment: rates to 115,200 baud.•256 modules on one 485 bus without a repeater.•2048 modules on one 485 bus using repeaters.•Multiple speeds & formats on a single RS-485 bus.•3000 VDC isolation voltage.•Two extra checksum bytes can be enabled or disabled.

Ordering Information: Visit cyberresearch.com/cymod for more info.#CM 7520 RS-232 to RS-485 Converter, isolated input.......................$90#CM 7520A RS-232 to RS-422/485 Converter, isolated input ..............$105#CM 7510 RS-422/485 Repeater, isolated input ..................................$95#CM 7560 USB to RS-232 Converter (see page 195 for details).............$75#CM 7561 USB to RS-232/422/485 Converter, isolated input ............$125#CM 7188E2 Ethernet to 2-port Converter (one RS-485, one RS-232) .....$240#CM 7188E2D CM 7188E2 with IP Address LED Display (see pg. 195) ...$290#CM 7188E4 Ethernet to 4-port Converter (one RS-485, three RS-232) ...$295#CM 7188E4D CM 7188E4 with IP Address LED Display (see pg. 195) ...$345#CM 7188E8 Ethernet to 8-port Converter (one RS-485, seven RS-232) ..$395#CM 7188E8D CM 7188E8 with IP Address LED Display (see pg. 195) ...$445

Power Supplies: #CM 243 72W Power Supply (3A @ 24VDC ; see photo on pg. 161)...........$100#PWR 2401DIN 25W DIN-Mt P.S. (1.1A @ 24VDC ; see photo on pg. 159).............$75#PWR 2402D5 Dual-Output DIN-Mt Switching P.S. (2.5A @ 24VDC & 0.5A @ 5VDC; pg. 159)..$175#PWR 24001US 2.4W Wall-Mt P.S. (100MA @ 24VDC, 110VAC in; US prongs) ........$20#PWR 24001EU 4.8W Wall-Mt P.S. (200MA @ 24VDC, 230VAC in; EU prongs)........$24

Mounting Accessories: #CM ENC16 Mounting Enclosure for up to 16 CyMOD/ADAMs (see p. 156)..$260#CM ENC06 Mounting Enclosure for up to 6 CyMOD/ADAM modules.......$110CM 7000 modules include utility software and a DLL library for Windows 98/2000/XP.

Analog Input Modules#CM 7018BL $245 Thermocouple 8 ; 3000VDC – 1.0 115.2K 16 10Hz ±20mA J,K,T,E,R,S,B,N,C,L,M 20MΩ – – – – Accuracy: ±0.05%FSR

#CM 7019R $340 Thermocouple 8 ; 3000VDC – 1.2 115.2K 8 0 16 8Hz ±20mA J,K,T,E,R,S,B,N,C,L,M 2MΩ – – – – Protected to 240Vrms

#CM 7013D $245 RTD Input 1 ; 3000VDC 4.5 1.3 115.2K 1 0 16 10Hz RTD – Pt, Ni � – – – – Protected to 10V p-p

#CM 7033 $245 RTD Input 3 ; 3000VDC – 1.0 115.2K 3 0 16 15Hz RTD – Pt, Ni � – – – – Accuracy: ±0.1%FSR

#CM 7015 $375 RTD Input 6 ; 3000VDC – 1.1 115.2K 6 0 16 12Hz RTD – Pt, Ni, Cu � – – – – Accuracy: ±0.05%FSR

#CM 7016D $360 Strain Gauge 2 ; 3000VDC 4.5 3.0 115.2K 2 0 16 10Hz ±20mA Strain Gauge 20MΩ 1 16 0~10V – Accuracy: ±0.05%FSR

#CM 7017F $245 Analog Input 8 ; 3000VDC – 1.3 115.2K � � ±20mA – 20MΩ – – – – Protected to 35 V p-p

#CM 7017C $230 Current Input 8 ; 3000VDC – 1.3 115.2K 8 0 16 10Hz – ±20mA – 20MΩ – – – –

Analog Output Modules#CM 7021 $195 Analog Output 1 ; 3000VDC – 1.8 115.2K – – – – – – – – 1 12 0~10V

#CM 7024 $275 Analog Output 4 ; 3000VDC – 2.4 115.2K – – – – – – – – 4 14 �

Digital I/O Modules#CM 7050D $135 Digital I/O 15 ; – 15 1.1 115.2K – – – – – – – – – – – –

#CM 7053 $135 Digital Input 16 ; – – 0.7 115.2K – – – – – – – – – – – –

#CM 7053D $150 Digital Input 16 ; – 16 0.9 115.2K – – – – – – – – – – – –

#CM 7041D $135 Isolated Digital Input 14 ; 3750VRMS 14 0.9 115.2K – – – – – – – – – – – –

#CM 7051D $180 Isolated Digital Input 16 ; 3000VDC 16 1.5 115.2K – – – – – – – – – – – –

#CM 7058 $135 Isol. AC Digital Input 8 ; 5000VRMS – 0.3 115.2K – – – – – – – – – – – –

#CM 7043D $135 Digital Output 16 ; – 16 1.1 115.2K – – – – – – – – – – – –

#CM 7042 $135 Isol. Digital Output 13 ; 3750VRMS – 1.0 115.2K – – – – – – – – – – – –

#CM 7042D $145 Isol. Digital Output 13 ; 3750VRMS 13 1.7 115.2K – – – – – – – – – – – –

#CM 7060D $150 4 Relay Outputs + 4 in 8 ; 3750VRMS 8 1.9 115.2K – – – – – – – – – – – –

#CM 7067 $135 7 Relay Outputs 7 ; – – 1.5 115.2K – – – – – – – – – – – – 7 SPST NO, dry contacts

#CM 7067D $175 7 Relay Outputs 7 ; – 7 2.2 115.2K – – – – – – – – – – – – LEDs show relay status

2 FORM A, 2 FORM C. CONTACTSRATED [email protected], 30VDC@2A

Open Collector to 30VDC;Sinks 100mA/channel



Logical OFF: 0~30VacLogical ON: 80~250VAC

Inputs usable as 16-bit counters;Both dry and wet contacts

Inputs usable as 16-bit counters;Logical 0 <1V, logical 1=+4~30V

Dry contact closure inputs;Inputs usable as 16-bit counters

Dry contact closure inputs;Inputs usable as 16-bit counters

Inputs usable as 16-bit counters;Output 30 mA/channel

Programmable power-on value and output slope.

0~20mA,4~20mA

Programmable power-on value and output slope.

0~20mA,4~20mA

No externalresistors needed

±150mV, ±500mV, ±1V, ±5V, ±10V

8 Diff or6 Diff & 2 S.E.

±15mV, ±50mV, ±100mV,±500mV, ±1V, ±2.5V

±15, ±50, ±100, ±150mV,±500mv, ±1, ±2.5, ±5, ±10V

±15, ±50, ±100, ±500mV,±1, ±2.5V

8 Diff or6 Diff & 2 S.E.

CM 7510CM 7510 CM 7520CM 7520

RS-485 RepeaterRS-485 RepeaterRS-232 to RS-485

ConverterRS-232 to RS-485

Converter

v22AMay2006


IND

EXN

EWP

RO

DU

CTSCOMPARISON CHART: ANALOG INPUT, OUTPUT, AND DIO

159

AN

ALO

GO

UTP

UT

(D/A )

REM

OTE/M

OD

ULA

RD

ATAA

CQ

UIS

ITION


Digi

tal I

nput

sDi

gita

l Out

puts

Part NumberEven

t Cou

nter

High

/Low

Ala

rm S

ettin

gs

32-b

it Co

unte

r Inp

uts

Max

. Cou

nter

Inpu

t Fre

quen

cy

Outp

ut R

elay

s

Conn

ecto

r Typ

e

Softw

are

Com

patib

ility

Chart Notes

GPIB

DIG

ITAL

I /O


Analog Input Modules– – – – – – – 20 Screw Terminals � #CM 7018BL– – – – – – – 20 Screw Terminals � #CM 7019R– – ; – – – – 10 Screw Terminals � #CM 7013D– – – – – – – 20 Screw Terminals � #CM 7033– – – – – – – 26 Screw Terminals � #CM 70151 4 ; ; – 50 Hz – 20 Screw Terminals � #CM 7016D– – – – – – – 20 Screw Terminals � #CM 7017F– – – – – – – 20 Screw Terminals � #CM 7017C

Analog Output Modules– – – – – – – 10 Screw Terminals � #CM 7021– – – – – – – 20 Screw Terminals � #CM 7024

Digital I/O Modules7 8 � – – 100 Hz – 20 Screw Terminals � #CM 7050D16 – � – – 100 Hz – 20 Screw Terminals � #CM 705316 – � – – 100 Hz – 20 Screw Terminals � #CM 7053D14 – � – – 100 Hz – 20 Screw Terminals � #CM 7041D16 – � – – 100 Hz – 26 Screw Terminals � #CM 7051D8 – � – – 100 Hz – 20 Screw Terminals � #CM 7058

16 – – – – – 20 Screw Terminals � #CM 7043D13 – – – – – 20 Screw Terminals � #CM 704213 – – – – – 20 Screw Terminals � #CM 7042D

4 4 � – – 100 Hz 4 20 Screw Terminals � #CM 7060D– 7 – – – – 7 20 Screw Terminals � #CM 7067– 7 – – – – 7 20 Screw Terminals � #CM 7067D

� In normal mode, resolution is 16 bits @ 10 samples/sec. In fastmode it is 12 bits @ 60 samples/sec.

� These CYMOD modules are compatible with many data acquisitionsoftware packages. They come with drivers for DASYLab® andActiveX™, plus OCX, DDE, and DLL libraries.

� These modules are intended for use with four types of RTD sensors:Pt100 �=0.00385, Pt100 �=0.003916, Pt1000 �=0.00385, andNi120. Minimum input impedance is 20 MΩ

� Output voltage ranges are 0~5V, 0~10V, ±5V, ±10V.� Each input can be used either as a separate 16-bit event counter or

as an input. On a given module, these lines can be used in anycombination of counters and inputs.

� These modules are intended for use with any one of seven types ofRTD sensors: Pt100 �=0.00385, Pt100 �=0.003916, Pt1000�=0.00385, Ni120, Cu100 �=0.00421, Cu100 �=0.00427, andCu1000 �=0.00421. Minimum input impedance: 20MΩ

Collect Data from 256 Points Over a Twisted Pair

Ethernet and USB Convertersto Control Your Serial Network

Now you can take advantage of the power and speed of USB andEthernet protocols without redesigning your existing serialnetworks. Our new family of CYMOD 7000 modules includes theCM 7560 series, which converts USB ports into serial ports, andthe CM 7188 series, which converts 10/Base-T Ethernet portsinto RS-232/422/485 serial ports. You can find detailed descriptionsand specifications on page 195. These modules are built for therigors of the shop or laboratory floor. They can be powered fromunregulated 10~30VDC lines, and they withstand operatingtemperatures up to 167oF (75oC).

Our CM 7561 (left)converters let you attachserial devices to USBports and also provide3000 VDC of isolation.

Our CM 7188 (right)series of Ethernet con-verters let you attachserial devices to Ethernetports anywhere in yourplant or shop floor.

New CYMOD 7000 Modules Simplify Design of DA & C Systems We’ve added more than 30 new CYMOD 7000 remote modular DAS

modules to our lineup, based on customer requests! Now, matching amodule to your application is much easier. Our line of CyMOD analoginput models now includes two new 8-input models, expanded thermo-couple and RTD ranges, plus expanded strain-gauge compatibility.There are two new analog-output modules with programmable power-on values and output slopes. Twelve new digital I/O modules haveinputs that can also be used as 16-bit counters, outputs that support upto 100 mA per channel, and LEDs that show I/O and relay status.

In addition, there are new isolated serial converters and repeatersto help you mix and match RS-232/422/485 signals. You get up to256 modules on one RS-485 bus without a repeater or as many as2048 modules on one RS-485 bus with CM 7510 repeater modules. To take advantage of Ethernet and USB buses, we have added eight newconverter modules (see pg. 195).

They aren’t technically CYMOD modules, but we also added twoDIN-mount Ethernet switches (pg. 195) with the capability to storeand forward data so that each connected device can communicate ateither 10 or 100 Mbps without affecting the speed of other attacheddevices.

Selected features of our new CYMOD 7000 series include:

• Operating temperature from –25 to +75oC (–13 to +167oF) and storage temperature from –40 to +85oC (–40 to +185oF).

• Up to 5000VRMS isolation voltage withadditional overvoltage protection ashigh as 240VRMS.

• Up to 2048 modules at distances to 4000 feet with CYMOD repeatermodules.

• Drivers for DASYLab®, and ActiveX™,plus OCX, DDE, and DLL libraries.Other drivers coming soon (see web).

• Powered from unregulated 10~30VDC.

Dual Watchdog Timers — Double Protection• Host watchdog timer: If contact is lost with the host PC, the

software-based Host Watchdog automatically sets the module’soutput lines to the safe values that you determine.

• Module watchdog timer: If the module halts, the hardware-based Module Watchdog forces the module’s output lines totheir predefined power-on values and restarts the module.

CM 7561CM 7561 CM 7188E8DCM 7188E8D

USB to RS-232 /422 /485Converter

USB to RS-232 /422 /485Converter

Intelligent Ethernet to Serial ConverterIntelligent Ethernet to Serial Converter

MO

TION

CO

NTR

OL

SER

IAL/C

OM

MU

NIC

ATION

S

PWR 2402D5PWR 2402D5

PWR 2401DINPWR 2401DIN

v22AMay2006


CYMOD & ADAM 4000-SERIES REMOTE MODULAR DAS

160 www.cyberresearch.com Toll-Free Assistance: 1-800-341-2525 (USA) Tel: 203-483-8815 Fax: 203-483-9024Visit our website for detailed product information! Applications Engineers: Monday – Friday, 9:00 AM – 5:00 PM, U.S. Eastern Time • e-mail: [email protected]

Part Number NotesVolta

ge In

put R

ange

sCu

rrent

Inpu

ts

Sens

or In

puts

Inpu

t Im

peda

nce

(Ω)

Anal

og O

utpu

t Cha

nnel

s

Anal

og O

ut R

esol

utio

n(b

its)

Volta

ge O

utpu

t Ran

ges

Curre

nt O

utpu

t Ran

ge

Wat

chdo

g Ti

mer

Mod

ule

Type

Tota

l Cha

nnel

s

Max

imum

Sam

ple

Rate

Reso

lutio

n(b

its)

Diffe

rent

ial I

nput

s

Sing

le-E

nded

Inpu

ts

Disp

lay

digi

ts o

r # o

f LED

s

Powe

r Con

sum

ptio

n(W

atts

)

Max

. RS-

485

Baud

Rat

e

Isol

atio

n

Pric

eRemote DAS Modules:CYMOD & ADAM Comparison Chart


Analog Input Modules#CM 4011 $175 Thermocouple 1 ; 5000VRMS – 0.8 115.2K 1 0 16 10Hz ±20mA J,K,T,E,R,S,B,N,C 70KΩ – – – –

#CM 4011D $215 Thermocouple 1 ; 2500VRMS 5.0 1.0 115.2K 1 0 16 10Hz ±20mA J,K,T,E,R,S,B,N,C 71KΩ – – – – 5-Digit LED Display

#CM 4018 $195 Thermocouple 8 ; 5000VRMS – 0.8 115.2K 6 2 16 10Hz ±20mA J,K,T,E,R,S,B,N,C 200KΩ – – – –

#CM 4013A $245 RTD Input 3 ; 5000VRMS – 0.8 115.2K 3 0 16 10Hz RTD – Pt, Ni (10 types) 4MΩ – – – –

#CM 4017 $195 Analog Input 8 ; 5000VRMS – 1.2 115.2K 6 2 16 10Hz ±20mA – 2.81MΩ – – – –

#CM 4014D $175 Analog Transmitter In. 1 ; 2500VRMS 5.0 1.3 115.2K 1 0 16 10Hz ±20mA Transmitter In. 105KΩ – – – –

#ADAM 4011 $180 Thermocouple 1 ; 3000VDC – 1.2 115.2K 1 0 16 10Hz ±20mA J,K,T,E,R,S,B 2MΩ – – – –

#ADAM 4011D $225 Thermocouple 1 ; 3000VDC 4.5 1.4 115.2K 1 0 16 10Hz ±20mA J,K,T,E,R,S,B 2MΩ – – – – 4.5-Digit LED Display

#ADAM 4019 $375 Thermocouple 8 ; 3000VDC – 1.2 115.2K 8 0 16 10Hz ±20mA J,K,T,E,R,S,B 20MΩ – – – – Accepts Modbus input

#ADAM 4018 $210 Thermocouple 8 ; 3000VDC – 0.8 115.2K 6 2 16 10Hz ±20mA J,K,T,E,R,S,B 20MΩ – – – –

#ADAM 4018M $405 TC w/Data Logger � 8 ; 3000VDC – 1.8 115.2K 6 2 16 10Hz ±20mA J,K,T,E,R,S,B 20MΩ – – – – 128KB RAM (38Ksamples)

#ADAM 4013 $170 RTD Input 1 ; 3000VDC – 0.7 115.2K 1 0 16 10Hz RTD – Pt, Ni (10 types) 2MΩ – – – –

#ADAM 4015 $345 RTD Input 6 ; 3000VDC – 1.2 115.2K 6 0 16 10Hz RTD – Pt, Ni, Balco 10MΩ – – – – Accepts Modbus input

#ADAM 4015T $330 Thermistor 6 ; 3000VDC – 1.2 115.2K 6 0 16 10Hz Thermistor – 3K, 10K 10MΩ – – – – Accepts Modbus input

#ADAM 4016 $200 Strain Gauge 1 ; 3000VDC – 2.2 115.2K 1 0 16 10Hz ±20mA Strain Gauge 2MΩ 1 16 0~10V – 30mA Output Drive

#ADAM 4012 $180 Analog Input 1 ; 3000VDC – 1.2 115.2K 1 0 16 10Hz ±20mA – 2MΩ – – – –

#ADAM 4017 $200 Analog Input 8 ; 3000VDC – 1.2 115.2K 6 2 16 10Hz ±20mA – 20MΩ – – – –

#ADAM 4022T $350 Dual-Loop PID Ctrlr. 2 ; 3000VDC – 4.0 115.2K 4 0 16 10Hz – 2 12 0~10V Accepts Modbus input

Analog Output Modules#CM 4021 $170 Analog Output 1 ; 5000VRMS – 1.6 115.2K – – – – – – – – 1 12 0~10V

#CM 4024 $245 Analog Output 4 ; 5000VRMS – 1.6 115.2K – – – – – – – – 4 12 ±10V –

#ADAM 4021 $180 Analog Output 1 ; 3000VDC – 1.4 115.2K – – – – – – – – 1 12 0~10V

#ADAM 4024 $275 Analog Output 4 ; 3000VDC – 3.0 115.2K – – – – – – – – 4 12

Digital I/O Modules#CM 4050 $100 Digital I/O (7 in/8 out) 15 ; – – 0.4 115.2K – – – – – – – – – – – –

#CM 4058 $167 Digital I/O (24 I/O+4 in) 28 ; – – 1.2 115.2K – – – – – – – – – – – –

#CM 4058C � $295 Digital I/O w/term. panel 28 ; – – 1.2 115.2K – – – – – – – – – – – – with Terminal Panel & Cable

#CM 4052 $100 Isolated Digital Input 8 ; 5000VRMS – 0.4 115.2K – – – – – – – – – – – –

#CM 4054 $130 Isolated Digital Input 15 ; 5000VRMS – 0.4 115.2K – – – – – – – – – – – –

#CM 4053 $120 Contact/Digital Input 16 ; – – 0.8 115.2K – – – – – – – – – – – – Wet/Dry Contact Inputs

#CM 4056 $125 Isolated Digital Out. 15 ; 5000VRMS – 0.4 115.2K – – – – – – – – – – – –

#CM 4060 $125 4 Relay Outputs + 4 in 8 ; – – 0.8 115.2K – – – – – – – – – – – –

#CM 4063 $160 8 Relay Outputs 8 ; – – 1.2 115.2K – – – – – – – – – – – –

#CM 4067 $150 8 AC Relay Outputs 8 ; – – 0.2 115.2K – – – – – – – – – – – –

#CM 4080 $175 Counter/Frequency 2 ; 5000VRMS – 2.0 115.2K – – – – – – – – – – – –

#ADAM 4050 $110 Digital I/O (7 in/8 out) 15 ; – – 0.4 115.2K – – – – – – – – – – – –

#ADAM 4055 $140 Digital I/O (8in/8 out) 16 ; 2500VDC 16 1.0 115.2K – – – – – – – – – – – – Max. output 200mA

#ADAM 4052 $110 Isolated Digital Input 8 ; 5000VRMS – 0.4 115.2K – – – – – – – – – – – –

#ADAM 4051 $140 Isolated Digital Input 16 ; 2500VDC 16 1.0 115.2K – – – – – – – – – – – – Overvoltage protect: 70VDC

#ADAM 4053 $125 Contact/Digital Input 16 ; – – 1.0 115.2K – – – – – – – – – – – – Wet/Dry Contact Inputs

#ADAM 4056S $130 Isolated Digital Out. 12 ; 5000VRMS 16 1.0 115.2K – – – – – – – – – – – – Sink type outputs

#ADAM 4056SO $155 Isolated Digital Out. 12 ; 5000VRMS 16 1.0 115.2K – – – – – – – – – – – – Source type outputs

#ADAM 4060 $135 4 Relay Outputs 4 ; – – 0.8 115.2K – – – – – – – – – – – –

#ADAM 4068 $165 8 Relay Outputs 8 ; – 8 0.6 115.2K – – – – – – – – – – – –

#ADAM 4080 $180 Counter/Frequency 2 ; 2500VRMS – 2.0 115.2K – – – – – – – – – – – –

#ADAM 4080D $265 Counter/Frequency 2 ; 2500VRMS 5.0 2.0 115.2K – – – – – – – – – – – – 2 INDEPENDENT 32-BIT COUNTERS;PROGRAMMABLE DIGITAL NOISE FILTER

2 INDEPENDENT 32-BIT COUNTERS;PROGRAMMABLE DIGITAL NOISE FILTER



6 ISOLATED INDEPENDENT INPUTS,2 ISOLATED INPUTS W/ A COMMON GND.

2 INDEPENDENT 32-BIT COUNTERS;PROGRAMMABLE DIGITAL NOISE FILTER

CONTACTS RATED 250VAC @3A,30VDC @3A


SEE CM 4058C, OR SEE PP. 129 &174 FOR TERMINAL PANELS & CABLES.

PROGRAMMABLE MODBUSOR SERIAL RS-485 OUTPUT

0~20mA,4~20mA

0~10 V,±10 V

0.5Ω OUTPUT IMPEDANCE,PROGRAMMABLE OUTPUT SLEW RATE

0~20mA,4~20mA

0~20mA,4~20mA

0~20 mA,4~20 mA

Thermistor 3k & 10k,RTD Pt 100 & 1000

0~20 mA,4~20 mA

±10V,Thermistor, RTD

±150mV, ±500mV,±1V, ±5V, ±10V

±150mV, ±500mV,±1V, ±5V, ±10V

±15mV, ±50mV,±100mV, ±500mV

±15mV, ±50mV, ±100mV,±500mV, ±1V, ±2.5V

±15mV, ±50mV, ±100mV,±500mV, ±1V, ±2.5V

±100mV, ±500mV, ±1V, ±2.5V, ±5V, ±10V,

±15mV, ±50mV, ±100mV,±500mV, ±1V, ±2.5V

±15mV, ±50mV, ±100mV,±500mV, ±1V, ±2.5V

+15VDC @ 30MA ISOLATED LOOPPOWER SOURCE. 5-DIGIT LED DISPLAY.

±150mV, ±500mV,±1V, ±5V, ±10V

±150mV, ±500mV,±1V, ±5V, ±10V

±15mV, ±50mV, ±100mV,±500mV, ±1V, ±2.5V

±15mV, ±50mV, ±100mV,±500mV, ±1V, ±2.5V

±15mV, ±50mV, ±100mV,±500mV, ±1V, ±2.5V

ADAM™ & ™ Modular Data Acquisition SystemsCyMOD

v22AMay2006

COMPARISON CHART: 4000-SERIES REMOTE DAS MODULES

161Toll-Free Assistance: 1-800-341-2525 (USA) Tel: 203-483-8815 Fax: 203-483-9024 www.cyberresearch.comApplications Engineers: Monday – Friday, 9:00 AM – 5:00 PM, U.S. Eastern Time • e-mail: [email protected] Visit our website for detailed product information!

Ordering Information: ADAM Accessories#ADAM 4520 RS-232 to RS-485 Converter ......................................................$95#ADAM 4521 Addressable RS-232 Module.....................................................$195#ADAM 4510S Isolated RS-485 Repeater Module.............................................$155#ADAM 4561 USB to RS-232/422/485 Converter ...........................................$140#CM 243 72W Power Supply (3A @ 24VDC; see photo above).........................$100#PWR 2401DIN 25W DIN-Mount Power Supply (1.1A @ 24VDC; see photo on pg. 159) ..$75#TP DIN09F 9-pin DIN-Mt. Terminal Panel w/DB-9F conn. (see web for details) ....$29#PCL LV LabVIEW® Driver for ADAM 4000 series (Windows 95/ 98 /2000 /NT) ...$N/C#PCL OCX ActiveX® Controls for ADAM 4000 series (Windows 95 / 98 /NT) .........$N/C#ADAM OPC OPC Server Software for ADAM 4000 series (Windows 95/ 98/NT/XP) ...$225#ADAM VIEW Graphical Interface Software for ADAM 4000 series (Win 98/2000 /NT/XP)..$195DOS driver, DLL library for Windows, LabVIEW driver (PCL LV), & Active X controls (PCL OCX)supplied with all ADAM modules. Call for availability of additional third-party software drivers.

NEW ADAM Modules for Ethernet! See page 194 for more information.

Ordering Information: CYMOD Accessories#CM 4530 USB to RS-232/422/485 Converter............................................$125#CM 4520 RS-232 to RS-422/485 Converter ...............................................$90#CM 4510 RS-422/485 Repeater Module ...................................................$120#CM 4531 RS-422/485 to RS-232: address a remote serial device ............$175#CM 243 72W Power Supply (3A @ 24VDC; see photo below).........................$100#PWR 2401DIN 25W DIN-Mount Power Supply (1.1A @ 24VDC; see photo on pg. 159) ..$75#CM OPC OPC Sever Software for CYMOD 4000 series (see page 157) ..............$39#PCI DAQB DAQBench™ ActiveX Controls for CYMOD 4000 series (see p. 157) ..$495Our CYMOD series offers performance and features comparable to ADAM-series modules,plus additional models that can make your system easier to design and less expensive.Configuration and utility software is included with CM 4520/4530 converter modules. Seepg. 157 for info on software support and hardware descriptions. See pg. 145 for DAQBench.

Digi

tal I

nput

sDi

gita

l Out

puts

Part NumberEven

t Cou

nter

High

/Low

Ala

rm S

ettin

gs

32-b

it Co

unte

r Inp

uts

Max

. Cou

nter

Inpu

t Fre

quen

cy

Outp

ut R

elay

s

Conn

ecto

r Typ

e

Softw

are

Com

patib

ility

Chart Notes

CyberResearch’s CYMOD™ Series industrial direct-to-sensor interface modules incorporate unique features forimproved reliability:•Surface coating protects the internal PC board & prolongs

the life of components operating in harsh environments. •100% compatible with ADAM™ modules, so they can

be integrated into an existing ADAM network.•Includes everything you need for wall, DIN-rail, or

piggyback mounting — installation is quick & easy!

24 I/O LINES(PROGRAMMABLE),

PLUS 4 TTLDIGITAL INPUTS


Analog Input Modules1 2 ; ; – – – 12 Screw Terminals � #CM 40111 2 ; ; – – – 12 Screw Terminals � #CM 4011D– – – – – – – 20 Screw Terminals � #CM 4018– – – – – – – 20 Screw Terminals � #CM 4013A– – – – – – – 20 Screw Terminals � #CM 40171 2 ; ; – – – 14 Screw Terminals � #CM 4014D

1 2 ; ; – – – 12 Screw Terminals � #ADAM 40111 2 ; ; – – – 12 Screw Terminals � #ADAM 4011D– – – – – – – 20 Screw Terminals – #ADAM 4019– – – – – – – 20 Screw Terminals � #ADAM 4018– – – – – – – 20 Screw Terminals � #ADAM 4018M– – – – – – – 10 Screw Terminals � #ADAM 4013– – – – – – – 20 Screw Terminals � #ADAM 4015– – – – – – – 26 Screw Terminals � #ADAM 4015T– 4 – – – – – 20 Screw Terminals � #ADAM 40161 2 ; ; – – – 10 Screw Terminals � #ADAM 4012– – – – – – – 20 Screw Terminals � #ADAM 40172 2 – ; – – – 24 Screw Terminals � #ADAM 4022T

Analog Output Modules– – – – – – – 9 Screw Terminals � #CM 40217 – – – – – – 20 Screw Terminals � #CM 4024

– – – – – – – 9 Screw Terminals � #ADAM 4021– – – ; – – – 26 Screw Terminals � #ADAM 4024

Digital I/O Modules7 8 – – – – – 20 Screw Terminals � #CM 4050

– – – – – � #CM 4058– – – – – � #CM 4058C

8 – – – – – – 20 Screw Terminals � #CM 405215 – – – – – – 20 Screw Terminals � #CM 405416 – – – – – – 20 Screw Terminals � #CM 4053– 15 – – – – – 20 Screw Terminals � #CM 40564 – – – – – 4 20 Screw Terminals � #CM 4060– – – – – – 8 20 Screw Terminals � #CM 4063– 8 – – – – 8 20 Screw Terminals #CM 4067– 2 – ; 2 100kHz – 20 Screw Terminals � #CM 4080

7 8 – – – – – 20 Screw Terminals � #ADAM 40508 8 – – – – – 26 Screw Terminals � #ADAM 40558 – – – – – – 20 Screw Terminals � #ADAM 405216 – – – – – – 26 Screw Terminals � #ADAM 405116 – – – – – – 20 Screw Terminals � #ADAM 4053– 12 – – – – – 26 Screw Terminals � #ADAM 4056S– 12 – – – – – 26 Screw Terminals � #ADAM 4056SO– – – – – – 4 15 Screw Terminals � #ADAM 4060– 8 – – – – 8 26 Screw Terminals � #ADAM 4068– 2 – ; 2 50kHz – 20 Screw Terminals � #ADAM 4080– 2 – ; 2 50kHz – 20 Screw Terminals � #ADAM 4080D

50-PIN TERMINAL PANEL W/CABLEPLUS 9 SCREW TERMINALS

50-PIN SCSI-2 CONNECTORPLUS 9 SCREW TERMINALS

� These CYMOD modules are compatible with many data acquisition software packages, includingDASYLab, GeniDAQ, and DAQBench ActiveX controls, plus Windows 95/98/2000/NT.

� These ADAM modules are compatible with many popular software packages, including LabVIEW,DASYLab, and GeniDAQ, plus Windows 95/98/2000/NT/XP.

� These ADAM modules are compatible with many popular software packages, including LabVIEW andGeniDAQ, plus Windows 95/98/2000/NT/XP.

� These ADAM modules are compatible with many popular software packages, including Intellution FIXDMACS plus Windows 95/98/2000/NT/XP.

� These CYMOD modules are compatible with many data acquisition software packages, includingDASYLab, and DAQBench ActiveX controls (pg. 145), plus Windows 95/98/2000/NT.

These CYMOD modules are compatible with DAQBench plus Windows 95/98/2000/NT/XP.� The ADAM 4018M data logger module features 32KB of on-board data storage memory (RAM).� CM 4058C is a CM 4058 complete w/ 50-pin 3-ft. shielded cable & TPB DIN50S terminal panel (pg. 146).

For Distributed Remote Data Acquisition and Control

COMPLETEREMOTE

DIGITAL I/OPACKAGE!

COMPLETEREMOTE

DIGITAL I/OPACKAGE!(just add your PC system!)

CM 4058C28-channelDigital I/O

module plusTerminal

Panel and Cable

28-channelDigital I/O

module plusTerminal

Panel and Cable

CM 243CM 243

Our CM 243 power supply provides +24VDC at 3A for ADAM and

CYMOD 4000/7000 series modules

v22AMay2006

UDAQ™ USB DATA ACQUISITION

162IND

EXN

EWPR

OD

UCT

SM

OTI

ON

CON

TRO

LG

PIB

SER

IAL

/CO

MM

UN

ICAT

ION

SAN

ALO

GO

UTP

UT

( D/ A

)D

IGIT

AL

I/O

REM

OTE

/MO

DU

LAR

DAT

AAC

QU

ISIT

ION


Data Acquisitionhas Arrived !

Data Acquisitionhas Arrived !

UDAQ 1612DAC:Ribbon cableheaders

“C” Series USB modules allow for easy wiring to standard terminal panels (50-pin Opto22 DIO hdr. & two 26-pin 5B-standard conns.)

6-ft. USB cable

incl.

6-ft. USB cable included

UDAQ 1612DAC:Ribbon cableheaders

UDAQ 1616DAB:BNC & DB-25connectors

UDAQ 1616DAB:BNC & DB-25connectors

Windows ® drivers,ActiveX controls, calibration routines, DAS application software, plus a strip-chart recorder application with Fast Fourier Transforms — included FREE! Load drivers & then plug into a USB port.Hot-plug anytime — never take your system down!

Daisy-chain up to 16 UDAQ modules

from a single USB port!

UDAQ 0816DABUDAQ 0816DAB

Ordering Information: Detailed UDAQ Specs pp. 128~129. Details on C5B Signal Conditioning pp. 168~169. Visit cyberresearch.com for more info.

USB Data Acquisition Modules with Built-In Removable Screw Terminals for all Signals#UDAQ 1612 16-channel USB Module: 0-10V & ±10V 12-bit, 100kHz A/D, Gains of 1/2/4/8, 16 DIO, 2 Counter/Timers.........................................$545#UDAQ 1612DA 16-channel USB Module: 0-10V & ±10V 12-bit, 100kHz A/D, Gains of 1/2/4/8, two 12-bit D/As, 16 DIO, 2 Counter/Timers...............$595#UDAQ 1616 16-channel USB Module: ±10V 16-bit, 100kHz A/D, Gains of 1/2/4/8, 16 DIO, 2 Counter/Timers.......................................................$845#UDAQ 1616DA 16-channel USB Module: ±10V 16-bit, 100kHz A/D, Gains of 1/2/4/8, two 16-bit D/As, 16 DIO, 2 Counter/Timers............................$945#UDAQ 1616H 16-channel USB Module: ±10V 16-bit, 50kHz A/D, Gains of 1/10/100/500, 16 DIO, 2 Counter/Timers, CJC.........................................$945#UDAQ 1616DAH 16-channel USB Module: ±10V 16-bit, 50kHz A/D, Gains of 1/10/100/500, two 16-bit D/As, 16 DIO, 2 Counter/Timers, CJC ............$1045

USB Data Acquisition Modules with one 50-pin and two 26-pin Industry-Standard Header Connectors for all Signals#UDAQ 1612C 16-channel USB Module: 0-10V & ±10V 12-bit, 100kHz A/D, Gains of 1/2/4/8, 16 DIO, 2 Counter/Timers.........................................$545#UDAQ 1612DAC 16-channel USB Module: 0-10V & ±10V 12-bit, 100kHz A/D, Gains of 1/2/4/8, two 12-bit D/As, 16 DIO, 2 Counter/Timers ..............$595#UDAQ 1616C 16-channel USB Module: ±10V 16-bit, 100kHz A/D, Gains of 1/2/4/8, 16 DIO, 2 Counter/Timers, ......................................................$845#UDAQ 1616DAC 16-channel USB Module: ±10V 16-bit, 100kHz A/D, Gains of 1/2/4/8, two 16-bit D/As, 16 DIO, 2 Counter/Timers, ...........................$995#C5BP 01 16-module Mounting Panel for C5B & 5B Signal Conditioning Modules (use w/CBL 2602 cable; see photos & details on pp. 168~169).......$275#INST 326HM DIN-Mount Screw Terminal Panel: 26-pin male header to screw terminals (use with CBL 2602 cable).................................................$75#CBL 2602 2-foot Ribbon Cable, 26-pin female header connectors............................................................................................................................$25#CY PB16 Mounting Panel for 16 SSRs or Power I/O Modules, Spade Lug Screw Terminals, Opto-22 Standard or Slim-Line Modules (see pg. 188) ............$99#CY PBC24 3-foot Ribbon Cable, 50-pin female header connector to 50-pin card edge connector (for CY PB16 & WR PB16 mounting panels) ................................$29#TP DIN50 DIN-Rail-Mount Screw Terminal Block with 50-pin male header connector (photo: see pg. 146)........................................................$89#CBL 5002 2-foot Ribbon Cable, 50-pin female header connectors............................................................................................................................$25

USB BNC Data Acquisition Modules with Metal Case, BNC A/D Connectors, & DB-25 Connectors for all Signals#UDAQ 0816DAB BNC USB Module: 8 Differential ±10V 16-bit, 100kHz A/D, Gains of 1/2/4/8, two 16-bit D/As, 16 DIO, 2 Counter/Timers ..........$1775#UDAQ 1616DAB BNC USB Module: 16 Single-Ended ±10V 16-bit, 100kHz A/D, Gains of 1/2/4/8, two 16-bit D/As, 16 DIO, 2 Counter/Timers..........$1775#CYSTP 25 25-pin Mini Terminal Panel, DB-25M connector to screw terminals (for optional plastic enclosure, see CYSTP 37E on page 152) ...............................$65#INST 338 DIN-Rail-Mount Screw Terminal Block with DB-25M connector............................................................................................................$75#CBL 5B-UDAQ 6-foot Custom Ribbon Cable, 26-pin header on one end, DB-25F connector on the other (C5B signal conditioning: pp. 168~169) ..............................$59#CBL 2503xx 3-foot 25-pin Round Shielded Cable; xx = MM for DB-25M male connectors on both ends, xx = MF for male-to-female .................................$15#CBL 2506xx 6-foot 25-pin Round Shielded Cable; xx = MM for DB-25 male-to-male, xx = MF for male-to-female, or xx = FF for female-to-female...............$18#CBL 2510xx 10-foot 25-pin Round Shielded Cable; xx = MM for DB-25M male connectors on both ends, xx = MF for male-to-female ...............................$20#CBL BNC03-50 3-foot 50-Ω cable with BNC connectors .......................................................................................................................................$19#CBL BNC06-50 6-foot 50-Ω cable with BNC connectors .......................................................................................................................................$25

Accessories for our UDAQ™ USB Products#UDAQ DIN Din Rail Clip Kit for UDAQ Modules (except BNC modules)..................................................................................................................$45#UDAQ BNCDIN Din Rail Clip Kit for UDAQ BNC Modules (fits UDAQ 1616DAB & UDAQ 0816DAB only)..............................................................................$45#RTERM 09X6 Package of 6 Spare/Replacement Removable Screw Terminal Strips (use with UDAQ 1612, 1612DA, 1616, 1616DA, 1616H, & 1616DAH).......$48

Quantities of a Single Item Per Shipment – Call for DetailsQUANTITY DISCOUNTS: 1-4/LIST 5-9/5% 10-24/10% 25+/CALL

USB DAS: 16 Channels, 16 Bits, 100kHz, No Sweat!

UDAQ BNC modules support data acquisition at speedsup to 100kHz with 16-bit accuracy. All signals are broughtout to DB-25 connectors, with BNC connectors for all A/Dand D/A channels. There are BNCs for 8 differential or16 single-ended analog inputs, 2 analog outputs, an A/DTTL trigger input, and a A/D TTL clock input. There’s aDB-25M connector for analog I/O, a DB-25F connectorfor DIO plus trigger & clock signals, and a DB-25F forthe two counter/timers & dynamic digital output.Aluminum case measures only 7.7"L x 4.4"W x 1.9"H (195x 113 x 49 mm). Mount using an optional DIN rail kit, attachto a panel with screws, or just place it on your benchtop!

UDAQ modules offer all the input features you need:gain ranges from 1~500, a 32-entry channel-gain queue,a large FIFO buffer, & an on-board microprocessor tocontrol data gathering. They automatically provide 500Vof isolation to eliminate many signal-acquisitionproblems. Models with suffix “C” let you cable straightthrough, pin-for-pin, to C5B signal-conditioning modules and panelsand solid-state I/O module racks.

Removable terminal blocks forquick-change field wiring

or easy swap-in of spares! UDAQ 1612DA (detail)

v22AMay2006


IND

EXN

EWP

RO

DU

CTS24-BIT HIGH-PRECISION USB DAS & USB ISOLATED DIO

163

MO

TION

CO

NTR

OL

GPIB

SER

IAL/C

OM

MU

NIC

ATION

SA

NA

LOG

OU

TPU

T(D

/A )D

IGITA

LI /O

REM

OTE/M

OD

ULA

RD

ATAA

CQ

UIS

ITION


Ordering Information: Details on solid-state relays are on pg. 188.

USB Isolated Data Acquisition Modules with 24-Bit Resolution in Rugged Aluminum Case#UDAQ 0424DA 4-channel USB A/D Module: 24-bit, 960Hz A/D, Ranges: 0~2.5V or ±2.5V at gains of 1/2/4/8/16/32/64; 16 DIO, 2 Counter/Timers, two 16-bit D/As..$1195#UDAQ 0424STP Screw Terminal Panel for UDAQ 0424DA, all signals broken out to fully labeled screw terminals to simplify wiring; 4.92"x 3.94"; DB-37F connector........$195#UDAQ 0424CBL Heavily shielded 6-foot (1.8m) cable especially designed for UDAQ 0424DA, low inductance, low impedance, DB-37 M-F ..........................$195#INST 339 37-pin Screw Terminal Block, DIN-Rail Mount (CBL 37xx-series 37-pin F-F cable required) ..........................................................................$109#STA 01 Universal Screw Terminal Panel w/two DB-37M connectors; 37 terminals for signals & 19 user-defined terminals, prototyping area (see pg. 152).....$95#CBL 3702FS 37-pin 2-foot (0.6-meter) Double-Shielded Cable (DB-37 female-to-female, photo: 2-ft. version of CBL 3705FS on pg. 154) ...................................$30#CBL 3705FS 37-pin 5-foot (1.5-meter) Double-Shielded Cable (DB-37 female-to-female, photo: pg. 154) ..........................................................................$35#CBL 3710FS 37-pin 10-foot (3-meter) Shielded Cable (DB-37 female-to-female, photo: visually similar to CBL 3705FS on pg. 154) .............................................$45#CBL 3715FS 37-pin 15-foot (4.5-meter) Double-Shielded Cable (DB-37 female-to-female, photo: 15-ft. version of CBL 3705FS on pg. 154)................................$55

USB Isolated Digital I/O Module in Rugged Aluminum Case#UDIO 96H 96-ch. Digital I/O USB Module: 64 Configurable I/O (8 banks of 8) + 32 Dedicated Inputs, sinks 12mA / line, 500V Isolation, back EMF diodes..$695#UDIO 100RN 100-pin Screw Terminal Panel for UDIO 96H, 64 LEDs show output status of the I/O lines, 4" x 6.7", 100-pin male Robinson-Nugent M connector.......$295#CBL 10003RN 100-pin 3-foot Cable, connects UDIO 96H to UDIO 100RN terminal panel, dual ribbon cable with 100-pin Robinson-Nugent F-F connectors........................$120#CYSTP 502E 100-point Screw Terminal Panel with steel enclosure, two 50-pin headers, requires CBL 10002 or 10005 cable, (photo: pg. 148)..........................$195#TP DIN50 DIN-Rail-Mount Screw Terminal Block with 50-pin male header conn., use two per UDIO 96H module with CBL 1000x cable (photo: pg. 146) .....$89#STA 100 100-point Screw Terminal Panel, two 50-pin headers, requires CBL 10002 or 10005 cable, (photo: pg. 152)...................................................$145#CBL 10002 2-ft. Ribbon Cable; splits a 100-pin Robinson-Nugent M connector into two separate 2-ft. cables with 50-pin headers, pins 1~50 and 51~100 (photo: pg. 154) ..$49#CBL 10005 5-ft. Ribbon Cable; splits a 100-pin Robinson-Nugent M connector into two separate 5-ft. cables with 50-pin headers, pins 1~50 and 51~100 .......................$67#UDIO CBL2405 5-ft. Ribbon Cable; lets you connect to our CYSSR 24 power I/O module panels or CYERB 24 relay panels (pg. 186); 100-pin conn. to two 5-ft. 50-pin cables ....$95#USBH 4204 4-port USB 2.0 Hub (separately-powered; lets you use up to 4 UDAQ modules on one USB port)...................................................$45#USBH 1204 4-port USB 2.0 miniature Hub (separately-powered; lets you use up to 4 UDAQ modules on one USB port)...................................$39#UDAQ DIN Din Rail Clip Kit for UDAQ Modules (except BNC Modules)...............................................................................................................$45

USB 24-bit DAS & 96 DIO – without opening your PC!High-Resolution USB DAS for Easy, Precise MeasurementFeaturing our highest resolution A/D converter, our 4-channel

UDAQ 0424DA is a plug-and-play USB module offering resolutionsup to 24 bits, or one part in 16,777,216. At that resolution, samplingspeed is 7.5Hz. If you need high sampling speed, select a resolution of16 bits (one part in 65,536), which gives you a sampling speed of960Hz, or choose combinations of speed & resolution in between.

The UDAQ 0424DA has four completely independent channels,so you can choose a different speed, resolution, and gain for eachchannel. In addition, you get two 16-bit analog outputs, 8 digitalinput lines and 8 digital outputs. Input lines 0 to 3 can initiateconversions on A/D channels 0 to 3; high-to-low transitions on digitalinput lines 4 to 7 can stop conversions on A/D channels 0 to 3.

All four analog inputs and both analog outputs can beautomatically calibrated via software; there are no switches orpotentiometers to set. In addition, software commands can setthe input impedance for each analog input individually.

DIO that Triggers Interrupts and Drives Solid-State RelaysOur hot-swap UDIO 96H is easy to install and isolates all 96

DIO lines from the USB bus for surges up to 500V. The software onthe facing page makes it easy to program, too.

Of the 96 total lines, 32 are dedicated digital input lines fornonclocked monitoring or control input, organized into four banksof 8 lines each. Two of these banks (16 lines) can generate interruptson change of state, so you can easily trigger the host computer totake some action. Inputs are pulled up to +5V through a 100kΩresistor. They can be “debounced” with a 5ms delay via software.

The remaining 64 lines can be software-configured as input oroutput in groups of 8. Output lines can sink 12mA — perfect forcontrolling solid-state relays. They are open-collector, with a 100kΩresistor to the internal isolated +5V source. In addition, you cansupply external +5V power to the outputs so that they retain theircurrent on/off values when the UDIO 96H module is powered down.Contact our applications department for information on usingsolid-state relays with our UDIO module.


UDAQ 0424DA:24-bit DataAcquisition

DB-37 maleconnectorbrings outall connections

100-pin Robinson-Nugentconnector brings out all96 lines: 64 I/O linesplus 32 dedicated inputs

The UDIO 100RN panelhas LEDs to indicate the

output status of the 64 DIOlines, and easy-to-wire angled

screw terminals for all 100 pins.

6-ft. USB cableincluded

6-ft. USB cableincluded

Pinoutshown on

cover

Pinoutshown on

cover

UDAQ 0424DA:24-bit DataAcquisition

UDIO 96H:96-channelDigital I/O

UDIO 96H:96-channelDigital I/O

UDAQ 0424STPUDAQ 0424STP

v22AMay2006


MULTI-FUNCTION USB • REMOTE DIRECT-TO-SENSOR SYSTEM

164IND

EXM

OTI

ON

CON

TRO

L


NEW

PRO

DU

CTS

REM

OTE

/MO

DU

LAR

DAT

AAC

QU

ISIT

ION

GPI

BSE

RIA

L/C

OM

MU

NIC

ATIO

NS

ANA

LOG

OU

TPU

T( D

/ A)

DIG

ITA

LI/

O

HUDAS 1612DA: 100kS/s, 16 DIO, 2 D/As, 1kS FIFO

Ordering Information: Detailed HUDAS 1612DA specs pp. 128~129; for USB DIO, see pp. 174 & 177. Visit cyberresearch.com for detailed information.

#HUDAS 1612DA 16-channel (S.E.) USB A/D Module: 12-bit, 100 kS/s A/D, two 12-bit D/As, 16 DIO, one 16-bit 1kHz counter / timer .................$545

• USB 2.0 compliant

• Powered from USB cable — no need for external power

• 100 kS/s analog input speed

• 12-bit single-ended A/D: ranges of ±10 V, ±5 V, ±2.5 V, ±1.25 V, ±0.625 V

• Two 12-bit D/As: ranges of ±10 V, ±5 V, 0~10 V, 0~5 V

• 16 DIO channels (8 in /8 out)

• 16 sample channel-gain queue

• 1kS A/D FIFO memory

• 16-bit 1kHz counter / timer2 x 10 removable screw terminal strips on each side of module;

1 x 10 removable screw terminal strip on end

HUDAS 1612DAHUDAS 1612DA

Our new HUDAS 1612DA multifunction USB data-acquisitionmodule features a unique circuit design that makes it especiallyuseful for such applications as transducer and sensor measure-ments, waveform acquisition and analysis, process control andmonitoring, and vibration and transient analysis.

Interrupt requests to the spacious 1kS FIFO can be sent witheach sampling action or only when the FIFO buffer is half full.You can combine continual high-speed data transfer with a morepredictable load on your operating system. In addition, you canuse pacer triggering to determine A/D conversion speeds.

4.9 foot (1.5m) USB cable included

Ordering Information: Visit cyberresearch.com or call for full details and specifications.

#INET 100 instruNet External A/D Box with 10-foot Cable (requires INET 200-series Controller Card) ...$89016 single-ended or 8 differential 14-bit A/D channels, 8 analog outputs, 8 digital I/O lines, w/screw terminals.

#INET 100B instruNet External A/D Box (same as INET 100, w/add’l 16 BNC connectors for easy wiring)..$990#INET 200 PCI (5V) Controller Card for Windows PC or Macintosh (controls up to 32 instruNet boxes)...$290#INET 230 PCMCIA “PC Card” Controller, Type II (controls up to 32 instruNet boxes).....................$290

(INET 231 required to power INET boxes; PCMCIA supported for Mac & Win 95/98/2000/XP – not NT4).

#INET 231 Power Adapter for PCMCIA (+5V& ±12V power for INET 100 boxes, req’d with PCMCIA controller)..$60#INET 350 instruNet World Plus Software, for easy programming using BASIC-like commands (Win XP, NT, 2000) ..$199#INET 380 LabVIEW Driver Pkg with one year of updates & technical support via e-mail (Windows & Mac)........$195#INET 312 Power Supply & adapter to DB-25, 100~240VAC; US prongs (1 required per 3 additional boxes)............$70#INET 312E Power Supply & adapter to DB-25, 100~240VAC; EU prongs (1 required per 3 additional boxes) ............$70#INET 330 Optical Isolator, isolates power and signal lines, use with INET 312 power supply .......................$290#INET 340 DIN Rail Mounting Brackets for one INET 100-series device...............................................$50#INET 34S 34-pin Screw Terminal Panel, breaks out I/O connector on INET 200 Controllers (cable required).....$75#CBL 3403 3-foot 34-pin Ribbon Cable, to connect INET 34S to I/O lines on INET 200-series Controller Card.....$25#CBL 2525 25-foot Shielded 25-pin Molded M-F Cable, to interconnect between instruNet devices.............$25#CBL 2550 50-foot Shielded 25-pin Molded M-F Cable, to interconnect between instruNet devices.............$50#CBL 25100 100-foot Shielded 25-pin Molded M-F Cable, to interconnect between instruNet devices...........$100

Each system requires at least one INET 200-series controller card, plus one or more INET 100-series external A/D boxes.Each INET 100 box comes with a 10-foot cable; for longer distances use our CBL 2500-series cables shown above.

Precision Direct-to-Sensor Data Acquisition System

INET 100BINET 100BINET 100INET 100 Power AdapterPower Adapter INET 200INET 200

A thousand times better for low volt-ages! instruNet provides tens of μV ofaccuracy instead of tens of mV at thesame cost and throughput rates as a typ-ical general-purpose board. It does thiswith a completely different topology:the analog electronics (gain amps, A/Ds,etc.) are close to the sensor in elec-trically-quiet boxes outside your PC,and the noisy digital electronics are leftinside the computer. Features include:

• High-accuracy data acq. boxes attach toWin 95/98/2000/NT/XP & Macintosh PCs.

• Each box has 16 s.e./8 diff. 14-bit analoginputs, 8 analog outputs, and 8 DIO.

• 166,000 samples/sec. to RAM or disk.• Boxes powered by 32-bit DSP PCI card or

PCMCIA card in PC or Mac.• Works w/ C, Visual Basic, VEE, TestPoint, &

SuperScope II. LabVIEW® drivers available.


v22AMay2006


IND

EXN

EWP

RO

DU

CTSUSB DATA ACQUISITION MODULES & ACCESSORIES

165

MO

TION

CO

NTR

OL

GPIB

SER

IAL/C

OM

MU

NIC

ATION

SA

NA

LOG

OU

TPU

T(D

/A )D

IGITA

LI /O

REM

OTE/M

OD

ULA

RD

ATAA

CQ

UIS

ITION


Ordering Information: Detailed URDAQ Specs pp. 128~129. Details on C5B Signal Conditioning pp. 168~169. Visit cyberresearch.com for more info.

#URDAQ 1614DA 16-channel USB Module (two DB-25M connectors): 0~5 V & ±2.5 V 14-bit, 250kHz A/D, four 14-bit D/As, 24 DIO .................$995#URDAQ 1614 16-channel USB Module (two DB-25M connectors): 0~5 V & ±2.5 V 14-bit, 250kHz A/D, 24 DIO .............................................$895#URDAQ 0814DAB 8-Channel USB A/D Module (eight BNC connectors): 0~5 V & ±2.5 V, 14-bit, 250kHz A/D, four 14-bit D/As, 24 DIO ..............$1195#URDAQ 0814B 8-Channel USB A/D Module (eight BNC connectors): 0~5 V & ±2.5 V, 14-bit, 250kHz A/D, 24 DIO .........................................$1095#TPC 25FS 25-pin Direct Plug-On Terminal Panel for URDAQ 1614s/0814s, short length for topmost DB-25 on 1614s (no cable required) ......$50#TPC 25FM 25-pin Direct Plug-On Terminal Panel for URDAQ 1614/1614DA, medium length for middle DB-25 connector (no cable required) .$50#TPC 25FL 25-pin Direct Plug-On Terminal Panel for URDAQ 1614/1614DA, long length for bottom DB-25 connector (no cable required).......$50#TP DIN2526 27-pin DIN-Mount Terminal Panel, 26-pin header and DB-25F connector to screw terminals (jumper connects DB-25F shield to terminal 27)....$70#CBL 2503MF 3-foot 25-pin Round Shielded Cable, DB-25 male-to-female connectors (see our website for longer cable lengths) .................................$15#CBL BNC03-50 3-foot 50Ω BNC Cable (for use with URDAQ 0814B/DAB)..................................................................................................................$19#CBL BNC06-50 6-foot 50Ω BNC Cable (for use with URDAQ 0814B/DAB)..................................................................................................................$25

Signal-Conditioning Accessories for use with URDAQ 1614 and 1614DA#C5BP 01 16-module Mounting Panel for C5B & 5B Signal Conditioning Modules (use w/5BP CBL cable; see photos & details on pp. 168~169) ........$275#5BP CBL 6-foot Custom Cable — URDAQ 1600 USB Module Analog I/O Connector to C5BP 01 Signal Conditioning Mounting Panel .....$59

URDAQ: USB DAS w/ 24 DIO, 4 D/As, FREE Software!

Key Specifications for URDAQ 0814 / 1614 Series Modules• Analog Input Specifications:

Number of A/D Channels: 8 differential (0814); 16 S.E./8 diff. (1614)Maximum Sampling Rate: 250 kHzResolution and Accuracy: 14 bits resolution; accuracy ±1 LSB

Input Ranges: ±2.5 V, 0~10 V (maximum voltage is±10V relative to analog ground)

Input Gains: 0.25, 0.5, 1, 2.5, 5, 10, 25, 50, 100(@ 0.25 gain, unipolar range is0~10V and bipolar range is ±10V)

Analog Input Buffer: On-board 500 sample FIFO (0814); S/Wbuffer holds up to 1M samples (1614)

Data Transfer: USB isochronous transfers @ 800 kb/sFIFO Buffer: 500 samples

• Analog Output Specifications (0814DAB and 1614DA only) :Number of D/A Channels: 4 channels with 14-bit resolution

Maximum Update Rate: 2 msData Transfer: Programmed I/O

Full Scale Error: ±1 LSB (1.22 mV)Output Drive: ±5 mA

Power On State: 0 volts

• Digital I/O Specifications:Number of Channels: 24 (3 x 8, software selectable by group)

Maximum Output Current: TTL level, 2 mAPower Supply: 0.5A @ 100~240VAC in; 1.12A @ +9VDC out


URDAQ 0814DABURDAQ 0814DAB

High-Performance Multifunction DAS for USB Users Compared to earlier USB data acquisition modules, our URDAQ 1614/0814

devices more than double the speed, double the number of D/A channels, andincrease available DIO lines by a third! These easy-to-install benchtop modulesare ideal for automated testing, status checking, process control, laboratoryapplications, and control or monitoring of any TTL-compatible equipment.

URDAQ 1614 modules are equipped with handy DB-25M connectors for allA/D, D/A, and DIO lines, so cabling is very easy and straightforward. URDAQ0814 models add the ease and flexibility of quick-connect BNC terminals. Therecommended TP DIN2526 terminal panel (see photo on p. 138) provides a 26-pinheader in parallel with its DB-25M connector and its 27 screw terminal pins, soit’s easy to get signals in and out and to connect to other boards and sensors.

Calibration is easy, too. All you need to do is to run the included calibrationsoftware. It walks you through all of the necessary steps and helps you savethe resulting calibration data.

All URDAQ 1614 & 0818 modules (andthe URDIO series on our website) comecomplete with DataWin™ for Windows®and EDRE™ applications builder, plusfree drivers for LabVIEW®, TestPoint®,and Agilent VEE®. This is the samesoftware used with our RCP series A/Dboards shown on pp. 138~139.

TPC 25FS(optional)

TPC 25FM (optional)

URDAQ 1614DAURDAQ 1614DA

URDAQ 1614DAURDAQ 1614DABoth modelsinclude a

6' USB cable

Two DB-25M connectors: top for analog inputs/outputs,bottom for digital I/O

One DB-25M connector for digital I/O

Eight BNC connectors for differential analog inputs

Rear of URDAQ 1614DA includes:9VDC power in, external power

and USB LEDs, and USB 1.1 /2.0 port

Rear of URDAQ 0814DAB includes: DB-9F conn. for analog inputs, USB port,

external power & USB LEDs, 9VDC power in

v22AMay2006


TECH NOTE: SIGNAL CONDITIONING

166IND

EXN

EWPR

OD

UCT

SM

OTI

ON

CON

TRO

LG

PIB

SER

IAL

/CO

MM

UN

ICAT

ION

SAN

ALO

GO

UTP

UT

( D/ A

)D

IGIT

AL

I/O

REM

OTE

/MO

DU

LAR

DAT

AAC

QU

ISIT

ION


Signal Conditioning — Getting What You Expect from Your SensorsWhen PC-based data acquisition (A/D)

boards first became available, many peopleassumed that you just plugged your PCboard into its slot, clipped on some testleads, and started taking measurements.Taking truly valid measurements can provedifficult, however. Factors such as longlead-wire distances, noisy environments, andthe types of sensors used are significant to

the quality of your data. When evaluating the validity of themeasurements taken by your data acquisition system, of primaryconsideration is the quality of the signal conditioning provided.

Traditional signal conditioning modules can add quite a bitto the cost of a data acquisition system, especially for systemswith large point counts. Many customers ask me if it is reallyworth the added expense to include signal conditioning in their DAS system. For some customers, signal conditioning isessential; for others, it is not worth the expense; and for some,it’ll be a judgment call whether they need it or not. I think thata good understanding of what signal conditioning modules dowill help you decide whether or not you need them.

What Do Signal Conditioning Modules Do?Signal conditioners take your real-world signal (which could

range from a few millivolts up to 450VAC) and transform it intoa well-mannered voltage range readable by your A/D converterboard. This can drastically improve resolution by utilizing asignificant part of your A/D board’s full-scale range. Signalconditioning modules also perform many additional functions:• Part of the signal conditioning process involves converting

differential signals to single-ended. Nearly all signals cominginto a signal conditioner will be differential, but voltagesgoing out are single-ended, sharing a common ground.In many cases, this conversion function doubles the numberof channels readable by your analog input board.

• In addition to conditioning your signal, signal conditioningmodules isolate your signal from electrical noise. Take, forinstance, one of our customers whose task was to monitor thetemperature of photocopier drums that were going through acoating process. Signal conditioning modules made itpossible for the system to accurately read a very smallthermocouple voltage while rejecting a large amount of noisefrom the galvanic process.

• Signal conditioners offer overvoltage protection. The linescarrying your signals are susceptible to picking up transientvoltages that could damage or destroy your computer.

• Signal conditioning is essential for transducers that requirevoltage or current excitation. Strain gauges, for example,require an excitation voltage to power the resistor bridgenetwork; potentiometer/resistance measurements need aknown voltage source; RTDs require a precision current source.

A/D Boards with On-Board Signal ConditioningBefore the advent of “all-in-one” remote DAS modules like our

CyMOD™ & ADAM™ series (pp. 156~161), data acquisition profes-sionals relied on analog-to-analog signal conditioners that interfacedto a data acquisition board. The board in your PC would thenperform the A/D conversion. Our intelligent data acquisition andcontrol modules have consolidated these functions. They can:• Interface with a transducer like analog signal conditioners,• Perform an A/D conversion with 16-bit accuracy, and • Transmit the data back to your PC across twisted-pair cable.

Multidrop RS-485 networks allow you to interface a very largenumber of points in this manner. Many CYMOD and ADAMmodules allow you to handle multiple points with just onemodule (unlike the 5B series signal conditioners, which requireone module per point, plus a module mounting rack).

We’ve recently added more than 30 new CYMOD 7000modules to our lineup. They include expanded thermocoupleand RTD ranges, plus expanded strain-gauge compatibility.There are two new analog-output modules with programmablepower-on values and output slopes. New digital I/O moduleshave inputs that can also be used as 16-bit counters, outputsthat support up to 100 mA per channel, and LED displays.

Speed is one area where these RS-485 signal conditioners arelimited. Conversion rates are typically only several samples persecond, so they should not replace your traditional A/D board inapplications where you need high-speed response, such asfrequency measurement. However, many of our traditionalanalog signal conditioners have low-pass filters set for 3 to 8Hz,in which case you’re not sacrificing anything to go with the newall-in-one CYMOD or ADAM-series signal conditioners.

Designed to accept a wide variety of signals, the instruNet(see page 164) allows you to place one or more units a greatdistance from your PC, and still achieve high-speed, high-accuracydata acquisition. It is a unique fusion of flexible signal condi-tioning circuitry, high-speed A/D, & remote (near-the-sensor) I/O.

Anti-Aliasing: Filter Out Sources of ErrorThe Nyquist Theorem states that an input signal should be

sampled at a rate at least twice the highest frequency compo-nent of the expected signal. For example, a 100kHz board canaccurately sample signals to 50kHz. But, if your signal has high-frequency components at or near your sampling rate, it’s possibleto read a high-frequency signal as a much lower frequency one.

On the other hand, many signals have false high-frequencycomponents, usually caused by noise on the system, which mustbe identified and eliminated, or they can distort your data.

One common way of filtering out these high-frequencycomponents is by oversampling. But using the oversamplingmethod can get expensive: you’ll need a high-performance A/Dboard, more memory, and a high-bandwidth bus.

A more economical but still effective method is to use ananti-aliasing filter. These low-pass filters only pass signalsto the A/D converter that are at or below the filter’s cutofffrequency — all higher frequencies are eliminated. For ex-ample, our PCIDAQ 3210 (see pg. 141) has an anti-aliasinglow-pass filter and 2500 VRMS of isolation built into it.

Our Applications Engineers Can HelpIf you are still unsure about your signal conditioning needs,

call one of our experienced Applications Engineers toll-free at1-800-341-2525 to discuss your application in specific detail.

Pictured here aretypical connections

for varioustransducer types.All connections

use #6-32screw terminals andaccommodate up to

14-gauge wire easily.

CyberResearch’s CYMOD signal conditioning modules can interface with yourtransducer, perform 16-bit A/D conversions, and transmit the data back to yourPC via a single twisted pair. Up to 128 modules can be connected to a CYMODRS-485 network, and more can be added with the use of a repeater (see pp. 156~161).

Tech Notes

Mike Mathis

v22AMay2006

Our DCD series of DC-to-DCpower converters provides high-precision DC power to componentsthat are not well suited to typicalunregulated shop-floor 10~30VDC

power. These converters are 83%eff ic ient and provide outputaccuracy of ±2% combined with lineregulat ion of ±0.2% and loadregulation of ±0.2%. In addition, theisolation resistance of 109Ω providesan isolation voltage of 1000 Vdc,protecting your most sensitive andvaluable equipment from accidentalvoltage surges.

Other key specifications include:

• Input Voltage Range: 18~36 VDC, unregulated• Output Voltage Ranges: +24 VDC (DCD 24S); +12VDC (DCD 12S);

+5VDC (DCD 05S); ±15VDC (DCD 15D); ±5VDC (DCD 05D)• Temperature Coefficient: ±0.03% per °C• Ripple & Noise: 100 mV peak-to-peak maximum• Switch Frequency: 200 kHz• Operating Temperature: –13°F to +158°F (–25°C to +70°C)• Storage Temperature: –22°F to +185°F (–30°C to +85°C)• Dimensions: 0.96"W x 2.78"D x 4.45"H (24.5 x 70.5 x 113 mm)

I ND

EXN

EWP

RO

DU

CTSDIN-MOUNT SIGNAL CONDITIONERS & DC POWER CONVERTERS

167

MO

TION

CO

NTR

OL

GPIB

SER

IAL/C

OM

MU

NIC

ATION

SA

NA

LOG

OU

TPU

T(D

/A )D

IGITA

LI /O

REM

OTE/M

OD

ULA

RD

ATAA

CQ

UIS

ITION


Versatile New DIN-Mount Signal-Conditioning ModulesWide Range of Inputs with Voltage and Current Outputs


DSC Series SignalConditioners

Convenient chartlabel on side of

each module showsswitch positions for all possible

input/outputcombinations

Pins 1 to 6:signal sourceand auxiliary

Pins 7 to 12:power source

and outputsignals

Calibrationadjustments

Power LED

(DSC SGA shown here)

Ordering Information: Visit cyberresearch.com for detailed information.

DIN-Mount Signal Conditioning with Current & Voltage Outputs#DSC TCA Isolated Thermocouple Module with adjustable CJC .........$225#DSC SGA Isolated Strain-Gauge Module with 950Hz bandwidth .......$195#DSC DCV Isolated Voltage Input Module with 3kHz bandwidth ........$160#DSC DCA Isolated Current Input Module with 3kHz bandwidth .........$160DIN-Mount High-Efficiency DC/DC Power Converters, ±2% Accuracy#DCD 24S 18~36VDC In, 24VDC @400mA Out, ±0.2% regulation........$125#DCD 12S 18~36VDC In, 12VDC @800mA Out, ±0.2% regulation ........$125#DCD 05S 18~36VDC In, 5VDC @2A Out, ±0.2% regulation ....................$125#DCD 15D 18~36VDC In, ±15VDC @300mA Out, ±0.2% regulation .....$125#DCD 05D 18~36VDC In, ±5VDC @1A Out, ±0.2% regulation..................$125

Precision DC-to-DC Power Converters

DCD SeriesDCD Series

I/Opinout

on label

DCin

DCout

PowerLED

Our new DSC series of signal conditioners offers DIN-mountconvenience anywhere in your plant. Modules are powered fromunregulated 10~30 VDC, which is probably the most commonform of DC power on most plant floors — and some voltage inthat range is also available on most vehicles and ships.

Unlike the more familiar C5B signal conditioners, the DSCmodels accept a wide range of inputs. As an example, there areindividual C5B models for each of the J, K, T, E, R, S, B, C, andN type thermocouples, but the DSC TCA supports all 9 types,plus L, L2, and M thermocouples. In addition, DSC signalconditioners support several output ranges instead of just one.

DSC Specifications (common to all DSC models on this page) :Three-Way Isolation: 3000 VDC

Supply Voltage: 10~30 VDC, unregulatedOperating Temperature: –13° to 167°F (–25° to +75°C)

Storage Temperature: –22° to 185°F (–30° to +85°C)Dimensions: 0.96"W x 2.78"D x 4.45"H

DSC TCA Specifications:Thermocouple Types: J, K, T, E, R, S, B, N, C, L, L2, M

Output Ranges: 0~10 V, 0~20 mAOverload Protection: 240 VRMS

Cold Junction Compensation: Offset adjustable –25.6°C to +25.4°COpen Thermocouple Detection: Yes

Accuracy: ±0.2% of full rangeDSC SGA Specifications:

Strain-Gauge Input Ranges: ±10, ±20, ±30, ±50, ±100 mVOutput Ranges: ±5V, ±10V, 0~5V, 0~10V, 0~20 mA

Bandwidth: 950 Hz typical @ –3 dBPower Consumption: 1.44 W (voltage output)

1.74 W (current output)Accuracy: ±0.1% of full range

DSC DCV Specifications:Voltage Input Ranges: ±5V, ±10V, 0~5V, 0~10 V

Output Ranges: ±5V, ±10V, 0~5V, 0~10 V, 0~20 mABandwidth: 3 kHz typical @ –3 dB

Power Consumption: 1.80 W (voltage output)2.30 W (current output)

Accuracy: ±0.1% of full rangeDSC DCA Specifications:

Current Input Ranges: 0~20 mA, 4~20 mAOutput Ranges: 0~5V, 0~10 V, 0~20mA, 4~20 mA

Bandwidth: 3 kHz typical @ –3 dBPower Consumption: 1.61 W (voltage output)

2.10 W (current output)Accuracy: ±0.1% of full range

Covers slide closed to grip DIN rail

DIP switches 1 & 2 select inputs

and outputs

DSC Series SignalConditioners

v22AMay2006

C5B-SERIES SIGNAL CONDITIONING SYSTEM

168 www.cyberresearch.com Toll-Free Assistance: 1-800-341-2525 (USA) Tel: 203-483-8815 Fax: 203-483-9024Visit our website for detailed product information! Applications Engineers: Monday – Friday, 9:00 AM – 5:00 PM, U.S. Eastern Time • e-mail: [email protected]

Expanded Range of 5B Signal Conditioning Modules

Isolated Millivolt Input Modules

Surge Suppression

andProtection

4

3

2

1

4NC

6

5

3NC

+Exc

+IN

–IN

–Exc

+

–Vin

BackpanelTerminal

Block

LPF ChopperDifferentialAmplifier

1NC2

NC

LPF

+5V

I/OCom.Read

Enable

17

19

22

IsolatedComputer-Side

Power

PowerOscillator Power

Com16

IsolatedField-Side

Power

-V

+V

–V

+V

Vout20

C5B ModuleBlock Diagram

Built to Work with the Widest Range of Input SignalsOver the years, our C5B Series signal conditioning modules

have been far and away the industry standard. Now, we’ve improvedthe line even further with redesigned modules. The result?

• Vastly improved noise specifications

• Faster access time (3 to 10μsec)

• Increased temperature stability

• 1500VRMS signal isolation

• 240VAC continuous input protection

• Permanent calibration — no adjustments

• Differential to single-ended outputs — doubles your A/D capacity

• Operating range of –13ºF to +185ºF (–25ºC to +85ºC)

• Only ±0.02% nonlinearity

• Continuous short-circuit protection

Part # Price Input Range Output Accuracy CMRR NMRR Bandwidth Input Noise Resistance#C5B 30-01 $150 ±10mV ±5V ±0.05% 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 30-02 $150 ±50mV ±5V ±0.05% 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 30-03 $150 ±100mV ±5V ±0.05% 160dB 95dB 4Hz 0.2µVRMS 50MΩ

Isolated Current Loop (mA) Input ModulesPart # Price Input Range Output Accuracy CMRR NMRR Bandwidth Input Noise Resistance

#C5B 32-01 $150 4~20mA 0~5V ±0.05% 160dB 95dB 4Hz 10nA RMS 20Ω ±0.1%#C5B 32-02 $150 0~20mA 0~5V ±0.05% 160dB 95dB 4Hz 10nA RMS 20Ω ±0.1%

Isolated 2-Wire Transmitter Input ModulesPart # Price Input Range Output Accuracy CMRR NMRR Bandwidth Input Noise Resistance

#C5B 42-01 $205 4~20mA 1~5V ±0.05% 100dB 120dB 100Hz 10nA RMS 20Ω ±0.1%#C5B 42-02 $205 4~20mA 2~10V ±0.05% 100dB 120dB 100Hz 10nA RMS 20Ω ±0.1%

Isolated Wide-Bandwidth Millivolt Input ModulesPart # Price Input Range Output Accuracy CMRR NMRR Bandwidth Input Noise Resistance

#C5B 40-01 $150 ±10mV ±5V ±0.05% 100dB 120dB 10kHz 0.4µVRMS 200MΩ#C5B 40-02 $150 ±50mV ±5V ±0.05% 100dB 120dB 10kHz 0.4µVRMS 200MΩ#C5B 40-03 $150 ±100mV ±5V ±0.05% 100dB 120dB 10kHz 0.4µVRMS 200MΩ

Isolated Voltage Input ModulesPart # Price Input Range Output Accuracy CMRR NMRR Bandwidth Input Noise Resistance

#C5B 31-01 $150 ±1V ±5V ±0.05% 160dB 95dB 4Hz 2µVRMS 650kΩ#C5B 31-02 $150 ±5V ±5V ±0.05% 160dB 95dB 4Hz 2µVRMS 650kΩ#C5B 31-03 $150 ±10V ±5V ±0.05% 160dB 95dB 4Hz 2µVRMS 650kΩ#C5B 31-07 $150 ±20V ±5V ±0.05% 160dB 95dB 4Hz 2µVRMS 650kΩ#C5B 31-09 $150 ±40V ±5V ±0.05% 160dB 95dB 4Hz 2µVRMS 650kΩ

Isolated Wide-Bandwidth Voltage Input ModulesPart # Price Input Range Output Accuracy CMRR NMRR Bandwidth Input Noise Resistance

#C5B 41-01 $150 ±1V ±5V ±0.05% 100dB 120dB 10kHz 2µVRMS 650kΩ#C5B 41-02 $150 ±5V ±5V ±0.05% 100dB 120dB 10kHz 2µVRMS 650kΩ#C5B 41-03 $150 ±10V ±5V ±0.05% 100dB 120dB 10kHz 2µVRMS 650kΩ#C5B 41-07 $150 ±20V ±5V ±0.05% 100dB 120dB 10kHz 2µVRMS 650kΩ#C5B 41-09 $150 ±40V ±5V ±0.05% 100dB 120dB 10kHz 2µVRMS 650kΩ

DC Voltage Input ModulesPart # Price Input Range Output Accuracy CMRR NMRR Bandwidth Input Noise Resistance

#C5B 43-01 $205 ±1V ±5V ±0.1% 100dB 120dB 1kHz 0.4µVRMS 2MΩ#C5B 43-02 $205 ±2V ±5V ±0.1% 100dB 120dB 1kHz 0.4µVRMS 2MΩ#C5B 43-03 $205 ±3V ±5V ±0.1% 100dB 120dB 1kHz 0.4µVRMS 2MΩ#C5B 43-04 $205 ±4V ±5V ±0.1% 100dB 120dB 1kHz 0.4µVRMS 2MΩ#C5B 43-05 $205 ±5V ±5V ±0.1% 100dB 120dB 1kHz 0.4µVRMS 2MΩ#C5B 43-06 $205 ±6V ±5V ±0.1% 100dB 120dB 1kHz 0.4µVRMS 2MΩ#C5B 43-07 $205 ±7V ±5V ±0.1% 100dB 120dB 1kHz 0.4µVRMS 2MΩ#C5B 43-08 $205 ±8V ±5V ±0.1% 100dB 120dB 1kHz 0.4µVRMS 2MΩ#C5B 43-09 $205 ±9V ±5V ±0.1% 100dB 120dB 1kHz 0.4µVRMS 2MΩ#C5B 43-10 $205 ±10V ±5V ±0.1% 100dB 120dB 1kHz 0.4µVRMS 2MΩ

Isolated Frequency-to-Voltage Converter Modules ( )Part # Price Input Range Output Accuracy CMRR CMV Threshold Input Noise Resistance

#C5B 45-01 $180 0~500Hz 0~5V ±0.05% 120dB 1500VRMS 60mV~350V <10mV, p-p 100kΩ#C5B 45-02 $180 0~1kHz 0~5V ±0.05% 120dB 1500VRMS 60mV~350V <10mV, p-p 100kΩ#C5B 45-03 $180 0~3kHz 0~5V ±0.05% 120dB 1500VRMS 60mV~350V <10mV, p-p 100kΩ#C5B 45-04 $180 0~5kHz 0~5V ±0.05% 120dB 1500VRMS 60mV~350V <10mV, p-p 100kΩ#C5B 45-05 $180 0~10kHz 0~5V ±0.05% 120dB 1500VRMS 60mV~350V <10mV, p-p 100kΩ#C5B 45-06 $180 0~25kHz 0~5V ±0.05% 120dB 1500VRMS 60mV~350V <10mV, p-p 100kΩ#C5B 45-07 $180 0~50kHz 0~5V ±0.05% 120dB 1500VRMS 60mV~350V <10mV, p-p 100kΩ#C5B 45-08 $180 0~100kHz 0~5V ±0.05% 120dB 1500VRMS 60mV~350V <10mV, p-p 100kΩ

Isolated True RMS Input ModulesPart # Price Input Range Output Accuracy CMRR Response Freq. Range Output Ripple Resistance

#C5B 33-01 $240 0~100mV 0~5V ±0.25% 100dB <400ms 45~1000Hz 0.025% span 1MΩ ±1%#C5B 33-02 $240 0~1V 0~5V ±0.25% 100dB <400ms 45~1000Hz 0.025% span 1MΩ ±1%#C5B 33-03 $240 0~10V 0~5V ±0.25% 100dB <400ms 45~1000Hz 0.025% span 1MΩ ±1%#C5B 33-04 $240 0~150V 0~5V ±0.25% 100dB <400ms 45~1000Hz 0.025% span 1MΩ ±1%#C5B 33-05 $240 0~300V 0~5V ±0.25% 100dB <400ms 45~1000Hz 0.025% span 1MΩ ±1%#C5B 33-06 $240 0~1A 0~5V ±0.25% 100dB <400ms 45~1000Hz 0.025% span 0.1Ω#C5B 33-07 $240 0~5A 0~5V ±0.25% 100dB <400ms 45~1000Hz 0.025% span 0.025Ω

Isolated Current Output ModulesPart # Price Output Range Input Accuracy CMRR NMRR Bandwidth Output Ripple Load Res.

#C5B 39-01 $150 4~20mA 0~5V ±0.05% 110dB 40dB 400Hz 10µA p-p 0-650Ω#C5B 39-02 $150 4~20mA ±5V ±0.05% 110dB 40dB 400Hz 10µA p-p 0-650Ω#C5B 39-03 $150 0~20mA 0~5V ±0.05% 110dB 40dB 400Hz 10µA p-p 0-650Ω#C5B 39-04 $150 0~20mA ±5V ±0.05% 110dB 40dB 400Hz 10µA p-p 0-650Ω#C5B 39-05 $150 0~20mA 0~20mA ±0.05% 110dB 40dB 400Hz 10µA p-p 0-650Ω#C5B 39-07 $150 ±20mA ±10V ±0.10% 110dB 40dB 275Hz 10µA p-p 0-450Ω

See pg. 166for our SignalConditioning

Tech Note

C5B Series

Not direct 5Breplacements

Isolated Voltage Output ModulesPart # Price Input Range Output Accuracy CMRR NMRR Bandwidth Output Ripple Resistance

#C5B 49-01 $215 0~5V ±5V ±0.05% 110dB 100dB 400Hz <2mV p-p 50MΩ#C5B 49-02 $215 ±5V ±5V ±0.05% 110dB 100dB 400Hz <2mV p-p 50MΩ#C5B 49-03 $215 ±5V 0~5V ±0.05% 110dB 100dB 400Hz <2mV p-p 50MΩ#C5B 49-04 $215 0~10V ±10V ±0.05% 110dB 100dB 400Hz <2mV p-p 50MΩ#C5B 49-05 $215 ±10V ±10V ±0.05% 110dB 100dB 400Hz <2mV p-p 50MΩ#C5B 49-06 $215 ±10V 0~10V ±0.05% 110dB 100dB 400Hz <2mV p-p 50MΩ#C5B 49-07 $215 ±5V ±10V ±0.05% 110dB 100dB 400Hz <2mV p-p 50MΩ

v22AMay2006

C5B-SERIES SIGNAL CONDITIONING SYSTEM

169Toll-Free Assistance: 1-800-341-2525 (USA) Tel: 203-483-8815 Fax: 203-483-9024 www.cyberresearch.comApplications Engineers: Monday – Friday, 9:00 AM – 5:00 PM, U.S. Eastern Time • e-mail: [email protected] Visit our website for detailed product information!

Isolated Linearized 2-Wire or 3-Wire RTD Input Modules ( )

Helps You Measure More Signals with Greater AccuracyMounting Panels & Accessories

Our C5BP 01 mounting panel can holdup to sixteen signal conditioning modules.Any number and type of modules may bemixed and matched on a single rack. You caneasily rack mount the C5BP 01 panel usingour C5BP R02 rack-mount kit.

Our multiplexing panels, C5BP 02 andC5BP 06, allow you to daisy-chain up to4 panels to a single A/D board and measureyour signals one at a time. Considering thelow bandwidth (4Hz) of many C5B seriesmodules, a single A/D board can handlea very large number of points.

All of our C5BP mounting panels requirean external power supply with a minimumof 500mA of current to power up to 16 inputmodules. Our INST 1140 power supplyprovides sufficient current for most applica-tions at a fraction of the cost charged bysome 5B suppliers.

Custom-Configured CablesPut our experience to work for you!

CyberResearch will custom-configure our5BP CBL cable to interface to any of the A/Dboards we sell. This covers the broadestspectrum of boards on the market.

Convenient mounting panels let you easily expandyour system whenever you need additional points.

Part # Price RTD Type / Input Range Output Accuracy CMRR NMRR Bandwidth Input Noise Resistance#C5B 34-01 $150 100Ω Platinum –100 to 100°C 0~5V ±0.32°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 34-02 $150 100Ω Platinum 0 to +100°C 0~5V ±0.13°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 34-03 $150 100Ω Platinum 0 to +200°C 0~5V ±0.26°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 34-04 $150 100Ω Platinum 0 to +600°C 0~5V ±0.78°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 34-C01 $150 10Ω @ 0° Copper 0 to 120°C 0~5V ±0.23°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 34-C02 $150 10Ω @ +25° Copper 0 to 120°C 0~5V ±0.23°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 34-C03 $150 10Ω @ 0° Copper 0 to 160°C 0~5V ±0.32°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 34-N01 $150 200Ω Nickel 0 to +300°C 0~5V ±0.40°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ

Isolated Strain Gauge Input Wide-Bandwidth ModulesPart # Price Type / Range / Excitation / Sensitivity Output Accuracy CMRR NMRR Bandwidth Input Noise Resistance

#C5B 38-01 $180 Full Bridge, 100Ω to 10kΩ, +3.33V, 3mV/V ±5V ±0.08% 100dB 120dB 10kHz 0.4µVRMS 50MΩ#C5B 38-02 $180 Full Bridge, 300Ω to 10kΩ, +10.0V, 3mV/V ±5V ±0.08% 100dB 120dB 10kHz 0.4µVRMS 50MΩ#C5B 38-03 $180 Half Bridge, 100Ω to 10kΩ, +3.33V, 3mV/V ±5V ±0.08% 100dB 120dB 10kHz 2µVRMS 50MΩ#C5B 38-04 $180 Half Bridge, 300Ω to 10kΩ, +10.0V, 3mV/V ±5V ±0.08% 100dB 120dB 10kHz 2µVRMS 50MΩ#C5B 38-05 $180 Full Bridge, 300Ω to 10kΩ, +10.0V, 2mV/V ±5V ±0.08% 100dB 120dB 10kHz 0.4µVRMS 50MΩ#C5B 38-06 $180 Full Bridge, 100Ω to 10kΩ, +3.33V, 10mV/V ±5V ±0.08% 100dB 120dB 10kHz 0.4µVRMS 50MΩ#C5B 38-07 $180 Full Bridge, 300Ω to 10kΩ, +10.0V, 10mV/V ±5V ±0.08% 100dB 120dB 10kHz 0.4µVRMS 50MΩ

Isolated Strain Gauge Input ModulesPart # Price Type / Range / Excitation / Sensitivity Output Accuracy CMRR NMRR Bandwidth Input Noise Resistance

#C5B 38-31 $180 Full Bridge, 100Ω to 10kΩ, +3.33V, 3mV/V ±5V ±0.08% 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 38-32 $180 Full Bridge, 300Ω to 10kΩ, +10.0V, 3mV/V ±5V ±0.08% 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 38-33 $180 Half Bridge, 100Ω to 10kΩ, +3.33V, 3mV/V ±5V ±0.08% 160dB 95dB 4Hz 1µVRMS 50MΩ#C5B 38-34 $180 Half Bridge, 300Ω to 10kΩ, +10.0V, 3mV/V ±5V ±0.08% 160dB 95dB 4Hz 1µVRMS 50MΩ#C5B 38-35 $180 Full Bridge, 300Ω to 10kΩ, +10.0V, 2mV/V ±5V ±0.08% 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 38-36 $180 Full Bridge, 100Ω to 10kΩ, +3.33V, 10mV/V ±5V ±0.08% 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 38-37 $180 Full Bridge, 300Ω to 10kΩ, +10.0V, 10mV/V ±5V ±0.08% 160dB 95dB 4Hz 0.2µVRMS 50MΩ

Isolated Thermocouple Input ModulesPart # Price Thermocouple Type / Input Range Output Accuracy CMRR NMRR Bandwidth Input Noise Resistance

#C5B 37-J01 $150 J type –100 to 760°C 0~5V ±0.61°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 37-K02 $150 K type –100 to 1350°C 0~5V ±0.97°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 37-T03 $150 T type –100 to 400°C 0~5V ±0.46°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 37-E04 $150 E type 0 to 900°C 0~5V ±0.59°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 37-R05 $150 R type 0 to 1750°C 0~5V ±1.72°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 37-S05 $150 S type 0 to 1750°C 0~5V ±1.82°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 37-B06 $150 B type 0 to 1800°C 0~5V ±2.21°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 37-C07 $150 C type +350 to 1300°C 0~5V ±1.01°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 37-N08 $150 N type –100 to 1300°C 0~5V ±0.98°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ

Isolated Linearized Thermocouple Input ModulesPart # Price Thermocouple Type / Input Range Output Accuracy CMRR NMRR Bandwidth Input Noise Resistance

#C5B 47-J01 $205 J type 0 to +760°C 0~5V ±0.61°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-J02 $205 J type –100 to +300°C 0~5V ±0.32°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-J03 $205 J type 0 to +500°C 0~5V ±0.36°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-K04 $205 K type 0 to +1000°C 0~5V ±0.80°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-K05 $205 K type 0 to +500°C 0~5V ±0.38°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-T06 $205 T type –100 to +400°C 0~5V ±0.80°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-T07 $205 T type 0 to +200°C 0~5V ±0.25°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-E08 $205 E type 0 to 1000°C 0~5V ±1.0°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-R09 $205 R type +500 to +1750°C 0~5V ±1.3°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-S10 $205 S type +500 to +1750°C 0~5V ±1.3°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-B11 $205 B type +500 to +1800°C 0~5V ±2.0°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-J12 $205 J type –100 to +760°C 0~5V ±0.70°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-K13 $205 K type –100 to +1350°C 0~5V ±1.20°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-K14 $205 K type 0 to 1200°C 0~5V ±0.96°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ#C5B 47-N15 $205 N type –100 to 1300°C 0~5V ±1.15°C 160dB 95dB 4Hz 0.2µVRMS 50MΩ

Ordering Information:C5BP Series Mounting Panels#C5BP 01 16-Module Mounting Panel.............$275#C5BP 02 16-Module Panel, multiplexing..........$295#C5BP 05 8-Module Mounting Panel ..............$225#C5BP 06 8-Module Panel, multiplexing............$245#C5BP 04 2-Module Mounting Panel ................$60#C5BP 03 1-Module Mounting Panel.................$40#C5BP EV 1-Module Evaluation Panel ...............$60Add –DIN for DIN-Mountable Panel ..............add $30

Accessories#5BP CBL 6-ft. Custom Cable, to DAS board.......$59#5BP CBX Daisy-Chain Cable, to add’l C5BP 02/06..$59#C5BP R02 Rack-Mounting Kit, for C5BP panels....$50#C5B DS Dead Short Module, field-to-system....$45#C5B PR Prototyping Module (build your own!) ....$45#INST 1140 5V, 1A Wall-Plug Power Supply........$39#CBL 2602 2-ft. 26-pin Ribbon Cable .................$25#TPB DIN26 26-pin DIN-Mt. Barrier Strip Panel ...$80#INST 326HM 26-pin DIN-Mt. Terminal Block .......$75

C5BP R02: Rack-Mount Kit

C5BP 01

DIN-mount versionsavailable — see

Ordering Info below.

C5BP EV

C5BP 04TPB

DIN26*

C5BP Mounting Panels

Modular Signal Conditioning: 1 Module for Each Signal Line

C5BP 0116-ModuleMounting

Panel

Quantities of a single item per shipment. Call for details.QUANTITY DISCOUNTS: 1-4/LIST 5-9/5% 10-24/10% 25+/CALL

Call for 4-wireRTD models.

*TPB DIN26 has DIN case (not shown).

C5BP 03

v22AMay2006

CYMOD AND ADAM REMOTE DAS M New CYMOD 7000...

Documents

Transcript of CYMOD AND ADAM REMOTE DAS M New CYMOD 7000...