CY-542 Manual

19
15/06/2012 CY-542 (B) Manual - Part 1.htm 1/37 file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 1.htm Congratulation! You have decided for a cycle computer to help you achieve your health & wellness. It gives you the true image of your exercise workout in precise way. CY-500 series is designed to give feedback required by the most discerning cyclists, in which is with all the functionality on one large easy to read display. CY-500 series is a premier cycle computer for your challenge ride. With the wireless technology, users can enjoy their cycling. Before use CY-500 series, please read through the manual that guides you on how to operate it correctly & quickly. CY-500 series offers you very useful features to customize your exercise. CY-500 series offers you very useful features to customize your exercise and gain the best & accurate measurement. After exercise, you may view your fitness result by pressing the button. It would be better to keep this manual for reference. TABLE OF CONTENTS 1. Item List 6.2.5MAXIMUM SPEED 2. Opreation 6.2.6TIME BIKE 1 3. Nomendature 6.2.7TIME BIKE 2 4. Main screen display 6.2.8TOTAL TIME 5. Basic setting 6.2.9TRIP COUNT UP/TRIP COUNT DOWN 5.1 clock/speed setting mode 6.2.9-1TRIP DISTANCE 5.1.1KM/H or ML/H 6.2.9-2ODO BIKE1 5.1.2TIMER COUNT UP or TIMER COUNT DOWN 6.2.9-3ODO BIKE2 5.1.3TRIP COUNT UP or TRIP COUNT DOWN 6.2.9-4TOTAL ODO 5.1.4CLOCK 6.2.9-5□KCAL 5.1.5BIKE 1 or BIKE 2 6.3 altitude/cadence functions 5.1.6WHEEL SIZE ACTUAL AlTITUDE 5.1.7TEMPERATURE 6.3.1MAXIMUM ALTITUDE 5.1.8SEX SETTING 6.3.2TRIP CLIMB 5.1.9KG or LB SETTING 6.3.3ALTITUDE BIKE 1 5.1.10□WEIGHT SETTING 6.3.4ALTITUDE BIKE 2 5.1.11LANGUAGE 6.3.5TOTAL ALTITUDE 5.2 HR target zone setting mode 6.3.6ALTITUDE GAIN or ALTITUDE LOSS 5 6.3.7AVERAGE GRADIENT 5 6.3.8MAXIMUM GRADIENT 5.3 altitude mode setting 6.3.9AVERAGE CADENCE 5.3.1ACTUAL ALTITUDE 6.3.10MAXIMUM CADENCE 5.3.2HOME ALTITUDE 6.3.11TRIP CADENCE 5.3.3RE-CALIBRATING THE ALTIMETER 6.4 clear functions 6. Basic function indication clear the measured value for altitude function 6.1 heart rate functions clear the measured value for Heart Rate function 6.1.1AVERAGE PULSE clear the measured value for timer count up/ timer count down 6.1.2MAXIMUM PULSE clear the measured value for trip count up /trip count down 6.1.3MAXIMUM PULSE % clear the measured value for speed function, heart rate function, 6 altitude function at same time 6 7. Id scan for coded hr and coded speed 6 8. Low battery indication 6 9. Battery replacement 6.2 clock/speed functions 10. Troubleshooting 6.2.1STOPWATCH 11. Specifications 6.2.2TIMER COUNT UP/TIMER COUNT DOWN 13. Important Health Notice 6.2.3TRIP TIME 14. Wheel size chart 6.2.4AVERAGE SPEED 1. Item List Please check that all the following items have been included with your cycle computer before starting. Bracket Nylon ties Rubber CY-500 series cycle computer Air Pressure Battery cover

description

Bion Inc. was OEM factory of and cycling computers. We created with all those fitness conscious people in mind and with the purpose of helping them meet their fitness goals. We know that when you first made your commitment to keep fit or lose weight, good health was your main concern. At Bion, we would like to offer you different products to help you through your physical activities and show your progress, no matter what your age, fitness and intensity level, body shape, and type of physical activities you practice. We're committed to provide you with the best technology to meet your needs and demands, yet, making the products easy to use for our customer, whatever exercise or physical activities they choose to achieve their ideal fitness goals. [Learn More]

Transcript of CY-542 Manual

Page 1: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 1.htm

1/37file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 1.htm

Congratulation!

You have decided for a cycle computer to help you achieve your health & wellness.

It gives you the true image of your exercise workout in precise way.

CY-500 series is designed to give feedback required by the most discerning cyclists,

in which is with all the functionality on one large easy to read display.

CY-500 series is a premier cycle computer for your challenge ride. With the wireless

technology, users can enjoy their cycling.

Before use CY-500 series, please read through the manual that guides you on how to operate

it correctly & quickly. CY-500 series offers you very useful features to customize your

exercise.

CY-500 series offers you very useful features to customize your exercise and gain the best &

accurate measurement. After exercise, you may view your fitness result by pressing

the button. It would be better to keep this manual for reference.

TABLE OF CONTENTS

1. Item List 6.2.5□MAXIMUM SPEED

2. Opreation 6.2.6□TIME BIKE 1

3. Nomendature 6.2.7□TIME BIKE 2

4. Main screen display 6.2.8□TOTAL TIME

5. Basic setting 6.2.9□TRIP COUNT UP/TRIP COUNT DOWN

5.1 clock/speed setting mode 6.2.9-1□TRIP DISTANCE

5.1.1□ KM/H or ML/H 6.2.9-2□ODO BIKE1

5.1.2□TIMER COUNT UP or TIMER COUNT DOWN 6.2.9-3□ODO BIKE2

5.1.3□TRIP COUNT UP or TRIP COUNT DOWN 6.2.9-4□TOTAL ODO

5.1.4□CLOCK 6.2.9-5□KCAL

5.1.5□BIKE 1 or BIKE 2 6.3 altitude/cadence functions

5.1.6□WHEEL SIZE □ ACTUAL AlTITUDE

5.1.7□TEMPERATURE 6.3.1□ MAXIMUM ALTITUDE

5.1.8□SEX SETTING 6.3.2□ TRIP CLIMB

5.1.9□KG or LB SETTING 6.3.3□ ALTITUDE BIKE 1

5.1.10□WEIGHT SETTING 6.3.4□ ALTITUDE BIKE 2

5.1.11□LANGUAGE 6.3.5□ TOTAL ALTITUDE

5.2 HR target zone setting mode 6.3.6□ ALTITUDE GAIN or ALTITUDE LOSS

5 6.3.7□ AVERAGE GRADIENT

5 6.3.8□ MAXIMUM GRADIENT

5.3 altitude mode setting 6.3.9□ AVERAGE CADENCE

5.3.1□ACTUAL ALTITUDE 6.3.10□ MAXIMUM CADENCE

5.3.2□HOME ALTITUDE 6.3.11□TRIP CADENCE

5.3.3□RE-CALIBRATING THE ALTIMETER 6.4 clear functions

6. Basic function indication □clear the measured value for altitude function

6.1 heart rate functions □clear the measured value for Heart Rate function

6.1.1□AVERAGE PULSE □clear the measured value for timer count up/ timer count down

6.1.2□MAXIMUM PULSE □clear the measured value for trip count up /trip count down

6.1.3□MAXIMUM PULSE % □clear the measured value for speed function, heart rate function,

6 altitude function at same time

6 7. Id scan for coded hr and coded speed

6 8. Low battery indication

6 9. Battery replacement

6.2 clock/speed functions 10. Troubleshooting

6.2.1□STOPWATCH 11. Specifications

6.2.2□TIMER COUNT UP/TIMER COUNT DOWN 13. Important Health Notice

6.2.3□TRIP TIME 14. Wheel size chart

6.2.4□AVERAGE SPEED

1. Item List

Please check that all the following items have been included with your cycle computer before starting.

Bracket Nylon ties Rubber

CY-500 series cycle

computer

Air Pressure Battery cover

Page 2: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 1.htm

2/37file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 1.htm

Air Pressure Battery cover

Magnet for Cadence (White) (Black)

Sensor Magnet for speed Transmitter & elastic belt Stabling Pads

*Black: Cadence Magent Mounting

*White: Sensor Mounting

2.OPERATION

2.1 attaching bracket on the handle bar

2.2 attaching speed sensor/magnet on bicycle

□ Installing the Cadence & Speed Sensor

Check the right side of the Chain Stay to find the suitable point to attach

the Cadence & speed sensor.

Please put the WHITE stabling pad between Chain Stay and Sensor.

The distance between cycle computer & the sensor would be within 150 cm.

□ Installing the Speed Magnet

Put the Speed Magnet on the left spokes of the back wheel and must face

the speed sensor.

Note: Turn the speed handle to adjust speed sensor.

The Max distance between speed sensor and Magnet shoul

within 1mm~5mm

□ Installing the Cadence Magnet

Put the Cadence Magnet on the Crank and must face Cadence Sensor

Please use the BLACK stabling pad for magent mounting.

Note: The max distance between the Cadence sensor and Magnet

should be within 5mm.

□Please check green light on the Cadence & Speed sensor to make

sure 2 functions operated normally when riding your bicycle at first time.

Note: Please turn around the wheel to check the green light on the sensor,

Page 3: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 1.htm

3/37file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 1.htm

Note: Please turn around the wheel to check the green light on the sensor,

Initial flashing green light indicates the sensor detected magnet

signals normally.

2.3 Wearing the chest belt for heart rate function

□The transmitter should be positioned right below the breasts/ pectoral muscles.

The strap should be comfortable, but secure.

Note: Transmitter will automatically get into "wake up" mode after the user wear it.

 

 

 

 

 

 

Page 4: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 2.htm

1/1file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 2.htm

3. NOMENCLATUR

4. MAIN SCREEN DISPLAY

Page 5: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 3.htm

1/15file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 3.htm

5. BASIC SETTING

The CY-542 is a multifunction device for all range of users who want to know more exercise result while riding the bicycle!

Before starting the device, please set the basic settings in advance to get more accurate and useful information from device.

5.1 speed/clock setting mode

Press <M> key to get into clock/speed mode    

Under any mode, press <S> key for 3 seconds  

SCREEN DISPLAY CHANGES

5.1.1□ KM/H or ML/H

The user can select the unit for speed which will be displayed on the screen

Under KM/H or ML/H,press <C> key or <H> key to switch one another.

Press <M> key to transfer next setting!    

5.1.2□TIMER COUNT UP or TIMER COUNT DOWN

The user can select TIMER COUNT UP or TIMER COUNT DOWN.

After selects the unit, it (COUNT UP / COUNT DOWN) will display.

Under TIMER COUNT UP or TIMER COUNT DOWN,

press <C> key or <A> key to switch another one.

Press <H>key or <C> key to adjust number  

Press <M> to transfer next setting!    

5.1.3□TRIP COUNT UP or TRIP COUNT DOWN

The user can select TRIP COUNT UP or TRIP COUNT DOWN in the setting mode.

After selects the function, it (TIMER UP / TIMER DOWN) will display.

Under TRIP COUNT UP or TRIP COUNT DOWN,

Page 6: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 3.htm

2/15file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 3.htm

press <C> key or <H> key to switch one another.

Under TRIP COUNT DOWN, press <M> key

to set up distance for TRIP COUNT DOWN.

   

Press <H>key or <C> key to adjust number

Press <M> to transfer next setting!  

NOTE: The range of distance ( 0~999.99 KM/H and 0~624.99 M/H)

5.1.4□CLOCK

Under SET CLOCK          

Press <H>key or <C> key to adjust number (12H, 24H, hour, minute, second)

Press <M> to transfer next setting!        

5.1.5□BIKE 1 or BIKE 2

CY-542 contains two bike setting, it allows the user to use this device for two different wheel size of bike.

Under BIKE 1 or BIKE 2  

Press <H>key or <C> key to adjust number

Press <M> to transfer next setting!  

5.1.6□WHEEL SIZE

To get the accurate result from the device for speed value or other information, the wheel size should be correct.

Mark the symbol on the tire and ride one circle. Then measure the length between two points that result comes out.

Or determine the wheel circumference by the following equ

Circumference (mm) = 2x3.14xR (inch) x2.54 (1 inch = 2.

R=Radius in centimeter

Please also refer the "wheel size chart" on last page to know the wheel size

Under WHEEL SIZE    

Press <H>key or <C> key to adjust number

Press <M> to transfer next setting!  

5.1.7□TEMPERATURE

The user can select temperature unit (℃ or ℉) that will be display on the screen

Under Temperature    

Press <H>key or <C> key to adjust number

Press <M> to transfer next setting!  

5.1.8□Set Sex

Under Set Sex    

Page 7: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 3.htm

3/15file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 3.htm

Under Set Sex    

Press <H>key or <C> key to adjust the symbol of male or

Press <M> to transfer next setting!  

5.1.9□Set KG or LB

Under Set KG or LB    

Press <H>key or <C> key to adjust weight symbol.

Press <M> to transfer next setting!  

5.1.10□Set Weight

Under Set Weight    

Press <H>key or <C> key to adjust number.

Press <M> to transfer next setting!  

5.1.11□LANGUAGE

CY- 542 offers 5 different languages (ENGLISH, FRANCAIS, DEUTSCH, ITALIANOL, ESPANOL)

for the user to choose, after selects the prefer language, all the displays will change to the selective language.

Under LANGUAGE            

Press <H>key or <C> key to switch language  

Press <M> key to transfer next setting or press < S> key for 2 seconds to leave setting mode.

Note: under any setting mode, press < S> for 2 seconds to leave setting mode!  

5.2 HR target zone setting mode

CY-542 contains Heart Rate target zone function, it can help the user to set up the personal target zone.

Target zone will vary for each individual user depending on Age, Personal fitness goals,

Existing health considerations (High blood pressure, circulation or respiration),

Medications and Doctor's recommendations.

Training Areas:

50% - 60% Maintain Fitness

60% - 70% Endurance

70% - 80% Slight Resistance

80% - 90% Sustained Resistance

Press <H> key to get into heart rate function mode  

5.2.1□SE Under any heart rate function, press <S> key for 2 seconds

□HR TARGET ZONE Under the        

Press <H> key or <C> key to adjust the maximum heart rate limited.  

Press <M> key into setting minimum heart rate mode.  

Press <H> key or <C> key key to adjust the minimum heart rate limited.

Press <M> key to access next setting!    

Page 8: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 3.htm

4/15file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 3.htm

Press <M> key to access next setting!    

5.2.3□AGE

To get more accurate target zone result, it is necessary to set up the user's age

Uner AGE              

Press <H> key or <C> key to adjust the age.  

Press <M> key to transfer next setting or press < S> key for 2 seconds to leave setting mode.

Note: under any setting mode, press < S> for 2 seconds to leave setting mode!

5.3 altitude mode setting

Press <A> key to get into altitude mode    

Under any altitude functions, press <S> key for 3 seconds  

5.3.1□ACTUAL ALTITUDE

Because air pressure will influenced by temperature or weather changes

while goes out for a ride. In order to correct the influence of the weather change

or temperature changes, the user can also adjust the actual altitude on CY-542.

If the user sees a road sign indicating actual altitude that is differ from the actual

attitude value on the device, the user may adjust actual altitude according to the sign.

Uner ACT. ALTI      

Press <H> key or <C> key to adjust actual alatitude.

Press <M> key to transfer next setting.  

         

5.3.2□HOME ALTITUDE

The "home altitude" is the altitude of the starting location (home or starting point). This value can be found by maps,

internet or newspaper. Once the number is entered into CY-542. It will calculate automatically.

The accurate calculation of altitude requires the precise information for home altitude.

To make CY-542 indicating altitude and climbing more precisely,

home altitude must be set up in advance.

Press <H> key or<C> key to home altitude.        

Press <M> key to transfer next setting or press < S> key for 3 seconds to leave setting mode.

Note: under any setting mode, press <S> key for 3 seconds to leave setting mode!

5.3.3□RE-CALIBRATING THE ALTIMETER

Due to change in local barometric pressure influenced by temperature and wind, the user may notice

the ending altitude is different from the home altitude as day goes by. It is normal because of pressure influences

over time. So before goes out for a ride, we suggest to call back the home altitude value in CY-542.

Page 9: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 3.htm

5/15file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 3.htm

NOTE: Under any mode, press and hold <H> key and <C> key at same time for 3 sec until "SET HOME" display.

The user can call back the value for home altitude you have entered before at any time.    

6. BASIC FUNCTIONS INDICATION

CY-542 is equipped with 4 different modes that have individual functions to use it for cycling.

Before starting the device, you need to get more details information about each functions!

6.1 heart rate functions

Press <H> key to get into heart rate functions

SCREEN DISPLAY CHANGES

6.1.1□AVERAGE PULSE 6.1.2□MAXIMUM PULSE

Sub-function of heart heart function. Sub-function of heart heart function.

Display the average measured pulse Display the maximum measured pulse.

6.1.3□MAXIMUM PULSE % 6.1.4□ HR TM

Sub-function of heart heart function. Sub-function of heart rate function.

Display the maximum measured pulse %. Displays measured time for heart rate .

Time for HR will be recorded after wearing chest belt and starting riding bicycle.

6.1.5□ OVER TIME 6.1.6□ IN ZONE TIME

Sub-function of heart rate function. Sub-function of heart rate function.

Displays amount of time that is over the user's Displays amount of time within the user's target zone.

target zone.

Page 10: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 3.htm

6/15file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 3.htm

6.1.7□ BELOW TIMESub-function of heart rate function.

Displays amount of time that is blow the user's target zone.

6.2 clock/speed functions

Press<M> key to get into clock/speed functions

DISPLAY CHANGES

6.2.1□STOPWATCH

Sub-function of clock/speed function.

The user can press <C> key to start or stop the function of stopwatch,

To clean the time, by holding <C> key for 3 seconds.

6.2.2□TIMER COUNT UP/TIMER COUNT DOWN

Sub-function of clock/speed function.

Timer count up: The timer will increase while riding the bicycle.

Timer count down: The timer will decrease towards zero while riding the bicycle.

*The user can set up the count down time in the setting mode.

Page 11: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 3.htm

7/15file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 3.htm

NOTE: the user can select count up or count down in the setting mode

After selects the display method, it (TIMER UP / TIMER DOWN) will display!

6.2.3□TRIP TIME 6.2.4□AVERAGE SPEED

Sub-function of clock/speed function. Sub-function of clock/speed function.

Displays the user's trip time from the beginning Displays the user's average speed from the beginning

to the current point to the current point

6.2.5□MAXIMUM SPEED 6.2.6□TIME BIKE 1

Sub-function of clock/speed function. Sub-function of clock/speed function.

Displays the user's maximum speed from the beginning Displays the total riding time for Bike 1

to the current point

6.2.7□TIME BIKE 2 6.2.8□TOTAL TIME

Sub-function of clock/speed function. Sub-function of clock/speed function.

Displays the total riding time for Bike2 Displays the total riding time ( Bike 1+ Bike 2)

6.2.9□TRIP COUNT UP/TRIP COUNT DOWN

Sub-function of clock/speed function.

Trip count up: The distance will increase while riding the bicycle.

Trip count down: The distance will decrease towards zero while riding the bicycle.

*The user can set up the count down distance in the setting mode.

NOTE: The user can select count up or count down in the setting mode

After select the display method, it (TRIP COUNT UP / TRIP COUNT DOWN) will display.

6.2.9-1□TRIP DISTANCE 6.2.9-2□ODO BIKE1

Sub-function of clock/speed function. Sub-function of clock/speed function.

Displays the user's trip distance from the beginning Displays the odometer of first wheel size setting.to the current point.

Page 12: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 3.htm

8/15file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 3.htm

NOTE: The number can not be erased by clear function, CY-542

will keep the value of ODO BIKE1, ODO BIKE2 and Total Odometer

in the memory even after the user changes new battery.

6.2.9-3□ODO BIKE2 6.2.9-4□TOTAL ODO

Sub-function of clock/speed function. Sub-function of clock/speed function.

Displays the odometer of second wheel size setting. Displays the total odometer of bike1 + bike 2

NOTE: The number can not be erased by clear function, CY-542 will keep the value of ODO BIKE1, ODO BIKE2 and Total

Odometer in the memory even after the user changes new battery. You can't set your last value of ODO BIKE1 and ODO BIKE2.

6.2.9-5□KCAL

6.3 Altitude/Cadence Functions

The CY-542 uses barometric air pressure to measure the altitude.

It can convert the data from current barometric pressure into the respective altitude.

Note: Please Do not insert any sharp objects into the measurement hole.

These holes must always stay open and clean.

SCREEN DISPLAY CHANGE

□ ACTUAL AlTITUDE 6.3.1□ MAXIMUM ALTITUDE

The "actual altitude" is the altitude of the location Displays the maximum altitude for the trip.

where the user currently is.

It is different from the home altitude. The altitud

information signs can usually be founded when

riding ascending the mountain or traveling.

Page 13: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 3.htm

9/15file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 3.htm

6.3.2□ TRIP CLIMB 6.3.3□ ALTITUDE BIKE 1

The "TRIP CLIMB" tells the user the current climbing value for this trip. If the user is riding under first setting of BIKE1,

( TRIP CLIMB will increase only when riding uphill ) ALTI.BIKE1 will display the total Altitude value for BIKE1

Note: If the climbing does not reach more than 4 meters NOTE: This value cannot be erased by the clear function,

, trip climb will not increase. unless apply the default setting.

(Refer to Default Setting Section)

6.3.4□ ALTITUDE BIKE 2 6.3.5□ TOTAL ALTITUDE

If the user is riding under first setting of BIKE2, Display total altitude value of bike1 + bike2

ALTI.BIKE2 will display the total Altitude value for BIKE2

NOTE: This value cannot be erased by the clear function, NOTE: This value cannot be erased by the clear function,

unless apply the default setting. unless apply the default setting.

(Refer to Default Setting Section) (Refer to Default Setting Section)

6.3.6□ ALTITUDE GAIN or ALTITUDE LOSS

Altitude gain and loss tells the user how high or low current riding is.

Altitude Function can be set into two systems. The metric system (m/min) or British system (feet/min)

If the user is riding uphill, the screen will display ALTI.GAIN. with value increasing.

If the user is riding downhill, the screen will display ALTI. LOSS. with value decreasing.

6.3.7□AVERAGE GRADIENT 6.3.8□ MAXIMUM GRADIENT

Display average gradient from the beginning Display maximum gradient from the beginning

to the current point. to the current point.

6.3.9□ AVERAGE CADENCE 6.3.10□ MAXIMUM CADENCE

Display average cadence from the beginning Display maximum cadence from the beginning

to the current point. to the current point.

6.3.11□TRIP CADENCE

It display total cadence for one trip.

Page 14: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 3.htm

10/15file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 3.htm

Under TRIP CADENCE, press<C> key for 2 seconds

(AVERAGE CADENCE, MAXIMUM CADENCE, TRIP CADENCE will return to zero)

6.4 Clear functions

Using <C> key (clear button) to make the value to return zero!

□clear the measured value for altitude function

Under TRIP CLIMB,press <C> key for 2 seconds

(MAXIMUM ALTITUDE, TRIP CLIMB, ALTITUDE GAIN, ALTITUDE LOSS

will return to zero.)

□clear the measured value for Heart Rate function

Under HR TM, Press <C> key for 2 seconds

(PULSE TM, ABOVE, IN ZONE, BELOW, MAX PULSE, AVG PULSE, MAX PULSE%will return to zero.)

□clear the measured value for timer count up/ timer count down

Under TIMER COUNT UP or TIMER COUNT DOWN, press <C> key for 2 seconds

(TIMER COUNT UP will return to zero or TIMER COUNT DOWN will return to default setting.)

□clear the measured value for trip count up /trip count down

Under TRIP COUNT UP or TRIP COUNT DOWN, press <C> key for 2 seconds

(TRIP COUNT UP will return to zero or TRIP COUNT DOWN will return to default setting.)

□clear the measured value for speed function, heart rate function, altitude function at same time

Under TRIP TIME, press<C> key for 2 seconds

All the measured value for speed, heart rate, altitude will return to zero.

□clear the measured value for average cadence, maximum cadence, trip cadence at the same time

Under TRIP CADENCE, press<C> key for 2 seconds

(AVERAGE CADENCE, MAXIMUM CADENCE, TRIP CADENCE will return to zero)

Page 15: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 3.htm

11/15file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 3.htm

□clear all the measured value except ID Codes by DEFAULT SETTING.

Under STOPWATCH MODE, press and hold all <M> <S> <C> keys at the same time for 6 sec until all the

values return to default values.

The default setting will keep the ID Code and the Clock after all the default values.

7. ID SCAN for CODED HR and CODED SPEED

The advange of 2.4Ghz wireless transmitting technology is stablized signals from the chest belt or speed sensor to

the cycle computer. CY542 can avoid noise interference from other devices while it is working with chest belt

or speed sensor.

Each device, sensor and chest belt has been ID SCAN after manufacturing.

So the user can start to use the product immediately without doing ID SCAN.

The main purpose of ID SCAN is to pair up the cycle computer to its speed/cadence sensor or chest belt as well

as to prevent signals and cross talk from other cycle computers. Each cycle computer set has been pre-ID Scan

right after it's produced, so the users do not necessarily need to run ID-SCAN after their purchase. The users would

need to run ID-SCAN as if additional speed/cadence sensor, chest belt are being replaced or for purpose of second

bike uses.

NOTE: The BIKE1&BIKE2 can coordinate with one individual code from one speed sensor or two individual codes

with additional speed sensor, chest belt respectively.

Under "any mode", press <H> key and <S> key at same time for 6 sceonds

When the percentage o

After comp

When the percentage

(Please note that chest belt and speed sensor have to be in wake up mo

- If "NO RENEW" sign shows on the displayer when scan completed, it means ID scan failure.

The user may press <C> key again to scan again.  

Page 16: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 3.htm

12/15file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 3.htm

- The mode returns to Clock mode after 30 seconds automatically.    

8.LOW BATTERY INDICATION

If low power for the battery, under Clock mode CY541 will display the signal to indicate the low battery information.

Low power for speed sensor

Low power for chest belt

Low power for watch

Page 17: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 4.htm

1/13file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 4.htm

9.BATTERY REPLACEMENT

CY-500 series computer:

Unscrew the back cover. The (+) side should be facing up. Gently remove the battery

and replace it with a new battery model CR2032.

Sensor:

Unscrew the back cover. The (+) side should be facing up. Gently remove the battery

and replace it with a new battery model CR2032.

10.TROUBLESHOOTING

Q1. Display is black or very light:

The battery power may be low. Try a new battery to make sure the battery is installed

correctly.

Q2. Display becomes dark or black:

The unit is too hot. Place the unit in a shaded area, and it will return to normal.

Q3. The unit operates slowly or struggled:

The unit is too cold. Warm the unit, and it will return to normal.

Q4. Date in display varies enormously:

Check your surroundings for electro magnetic or high energy interference and move

away from the source of interference.

Q5. Data in display shows slowly:

The unit may be affected by low temperature factor but it didn't influence the function

reading. When the temperature rises, the data reading/ witch will back to the normal.

Q6. Current speed does not appear

It may be caused by the following situation: the distance & position between

magnet and sensor to adjust or low battery power.

11.SPECIFICATIONS

  Receiver Speed Sensor/CadenceTransmitter & belt

Operating Temperature

0℃~ 50℃ 0℃~ 50℃ 0℃~ 50℃

Storage Temperature -10℃~ 60℃ -10℃~ 60℃ -10℃~ 60℃

Emitted Frequency 2.4GHz 2.4GHz ± 5% 2.4GHz ± 10%

Battery3 volt lithium

2032 cell

3 volt lithium

2032 cell

3 volt lithium

2032 cell

Weight 30.6 grams 20 grams65 grams ± 5%(including belt)

Stopwatch Range: 0~29 (hour): 59 (minute): 59 (Second)

Current Speed Range: 0~99.9 KM/ 0~62.4 Mile

Page 18: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 4.htm

2/13file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 4.htm

AVG Speed Range: 0~99.9 KM/ 0~62.4 Mile

MAX Speed Range: 0~99.9 KM/ 0~62.4 Mile

(Trip) Distance Range: 0~999.99 KM/0~624.99 Mile

Odometer Range: 0~99999 KM/ 0~62499 Mile

Actual Altitude: -699~3999m/ -999~9999Feet

Max Altitude: 0~9999m/0~9999Feet

Trip Climb: 0~9999m/0~9999Feet

TOTALCTI: 0~99999m/0~99999Feet

ALTI, Gain/ Loss: 0~9999m/0~9999Feet

12.LIMITED WARRANTY

This product is for ONE year limited warranty commencing on the date of purchase.

The product will be free from defects in material and workmanship for one year

from the date of purchase.

Warranty does not cover the batteries, damages due to misuse,

abuse or accidents, cracked or broken cases, negligence of precautions,

improper maintenance or commercial use.

Warranty is void if the repairs are done by non authorized service technician.

The warranties contained herein are expressly in lieu of any other warranties including

implied warranty of merchantability and/ or fitness for purpose. In no event shall

manufacturer be liable for any damages, direct or incidental, consequential or special,

arising out of or related to the use of this manual or the products described herein.

During this warranty period (one year) the product will either be repaired

or replaced without charge.

13.IMPORTANT HELATH NOTICE!!

Please read over the following information before using the Cycle Computer.

Never use the cycle computer in combination with other medical/implanted electronic

equipment and device (especially heart pacemakers, EKG equipment, TENS equipment,

cardio-pulmonary machines and pacemaker.)

If you are severely ill or pregnant, please consult your doctor before using cycle computer.

Keep this device away from children. It contains batteries, which might be swallowed

Page 19: CY-542 Manual

15/06/2012 CY-542 (B) Manual - Part 4.htm

3/13file:///D:/CY-542 (B) Manual/CY-542 (B) Manual - Part 4.htm

by children.

As with most electronic receiving devices, there can sometimes be interference that causes

inaccurate display readouts. Avoid using your cycle computer near common sources

of interference. These include high voltage power lines, air conditioning motor units,

fluorescent lights, wristwatches, mobiles, and computers.

14.WHEEL SIZE CHART

Tire Scale L(mm)   Tire Scale L(mm)

14 x 1.50 1020   26 x 1.75 2023

14 x 1.75 1055   26 x 1.95 2050

16 x 1.50 1185   26 x 2.00 2055

16 x 1.75 1195   26 x 2.10 2068

18 x 1.50 1340   26 x 2.125 2070

18x1.75 1350   26 x 2.35 2083

20 x 1.75 1515   26 x 3.00 2170

20 x 1-3/8 1615   27 x 1 2145

20 x 1-3/8 1770   27 x 1-1/8 2155

22 x 1-1/2 1785   27 x 1-1/4 2161

24 x 1 1753   27 x 1-3/8 2169

24 x 3/4 Tubular 1785   650 x 35A 2090

24 x 1-1/8 1795   650 X 38A 2125

24 x 1-1/4 1905   650 X 38B 2105

24 x 1.75 1890   700 X 18C 2070

24 x 2.00 1925   700 X 19C 2080

24 x 2.125 1965   700 X 20C 2086

26 x 7/8 1920   700 X 23C 2096

26 x 1(59) 1913   700 X 25C 2105

26 x 1(65) 1952   700 X 28C 2136

26 x 1.25 1953   700 X 30C 2170

26 x 1-1/8 1970   700 X 32C 2155

26 x 1-3/8 2068   700C Tubular 2130

26 x 1-1/2 2100   700 X 35C 2168

26 x 1.40 2005   700 X 38C 2180

26 x 1.50 2010   700 X 40C 2200