CX B SERIES COMPACT EXCAVATOR - AdvanceQuip · to monitor fuel consumptions, operating hours...
Transcript of CX B SERIES COMPACT EXCAVATOR - AdvanceQuip · to monitor fuel consumptions, operating hours...
NEW
CX B SERIES COMPACT EXCAVATOR
CX27B CX31B CX36B CX55Bx
22
SMALL SMART TECHNOLOGY
Powerful digging and liftingperformances incompact dimensions • Easy simultaneous movements• Accuracy at work with outstanding controllability• Reliable and durable. Maximize your excavator’s uptime
A well performing and user friendly partner.CASE CX B Series Compact Excavators have been deeply revised in order to improve operator comfort. Maximised focus on daily activities.
Machine is ‘ready to work.’Standard hammer line.Connections are located close to the toolto reduce hose lengthsand any potential damage.
3
NEW FEATURES
LESSDUST
FASTERAND EASIER
MAINTENANCE:JUST ONE FILTER
IN ONE PLACE
-10%NOISEEMISSIONS
• All needed information at a glance. The new LCD SCREEN quickly allows the operatorto monitor fuel consumptions, operating hours together will all the maintenance information
• When full power is not needed the ECO MODE SETTING that reduces fuel consumption by 20% is available
• SMART COOLING SYSTEM. The cooling system is designed to improve the air fl ow with 3 main benefi ts:
4
The Case dealer: your Professional PartnerYour success starts with world-class Case machinery and attachments. Your Case dealer will help you work smarter and faster by selecting equipment that delivers performance and operator comfort. Your dealer has the knowledge and experience necessary to help you choose the right attachments so you can…
• Work faster and extend equipment life.• Increase machine utilization.• Increase your capabilities.
Let your Case dealer service your machine on the jobsite. You’ll be back on the job faster. Advantages include…
• Responsive job site service to keep your equipment running.• Increase machine uptime.• Certifi ed service staff and improved parts availability.
5
PartsWhen you’re looking for superior parts options to maximise the performance and lower the operating costs of your Case machinery, turn to CNH Original Parts to keep you equipped for success. CNH Original Parts fi t better, install faster and last longer and in an industry where “high impact” and “heavy lifting” are the norm, the smallest mechanical differences can lead to big problems. CNH Original Parts from Case are manufactured from superior materials and specifi cally designed for Case construction equipment to continually and reliably withstand the punishment of everyday construction. So steer clear of mechanical problems and future breakdowns, by choosing CNH Original Parts from Case. They’re the only parts that are fi eld-tested and proven to keep your Case equipment performing its best.
Service. Rely on Case to Deliver for YouYour commitment to your operation is evident every day, but that doesn’t minimise the enormous pressure you face to reduce operating costs and improve productivity. So when you’re on the job, make sure you have top-notch service and support of Case behind you every step of the way.With our factory trained technicians, you can ensure that top-notch service professionals are working on your maintenance needs, so you can focus on your business and the big job challenges ahead, not on the tasks of servicing your equipment.
With your Case Service, you get more than mere oil changes. A Case Service ensures your Case equipment receives a thorough service that meets all requirements of its service schedules and properly maintains it for the day-in, day-out punishment of construction work.Don’t give another thought to time-consuming maintenance tasks. Simply rest easy and make certain that your service needs are taken care of by a Case factory trained technician
6
When the unexpected occurs, you need to know your equipment is protected. At Case Construction we understand the importance of your machinery being in good working order when it counts.
ProCover is designed to help keep your equipment working well beyond the manufacturer’s base warranty period while taking away the concerns of the cost and inconvenience of mechanical failure.
WHAT ARE THE ADVANTAGES OF PROCOVER?
PEACE OF MINDProvides protection beyond the Manufacturer’s Base Warranty Period.
FLEXIBLE OPTIONSPlans can be customised to meet individual needs.
DEPENDABLE SERVICEEligible repairs completed by an authorised Case Construction Dealership and their trained service technician’s using genuine OEM parts & lubricants.
TRANSFERABLE PROTECTIONNew Equipment Plans may be transferred to a new owner at no charge
COVERAGE
• STANDARD
PROTECTION PLAN 3 Year / 3000 Hour
Additional years/hours can be purchased.
Please contact your local Case Construction
dealer for further information.6
7
STANDARD PROCOVER PLUS PROTECTION PLANCONSTRUCTION EQUIPMENT MASTER PARTS SCHEDULE
PREMIER COMPONENTS COVERED
This plan provides coverage for the components listed below when a failure occurs due to a defect in material or workmanship, and
may provide coverage for additional components not listed when the damage is caused by or resulting from a covered failure of a
listed component.
ENGINE AND ALL INTERNAL
LUBRICATED COMPONENTS WITHINTRANSMISSIONS/AXLES/HYDROSTATICS ELECTRICAL HYDRAULICS
Accessory Gears Axle Housing Alternator Accumulator And Related Relief Valve
Air Intake Hose Axle Shaft Gauges Brake Accumulator
Camshaft Clutch Discs (Wet Only) Horn Brake Pressure Sensor
Camshaft Bearings Clutch Plates (Wet Only) Indicators Brake Pump, Brake Valve
Camshaft Drive Gear Control Rods Instruments Differential Lock Valve
Catalytic Converter Counter Shaft Clutch Electronic Joysticks Fan Pumps And Motors
Charge Air Cooler Differential Housing Electric Motors Hydraulic Cylinders
Cold Start Enrichment Systems Differential Pinion Gear / Ring Gear Factory Installed Telematics Hydraulic Hoses and Piping
Connecting Rods & Bearings Drive Axle Hub Sensors Hydraulic Motors
Crankshaft Bearings & Gear Drive Shaft Support Bearing Solenoid Valves Hydraulic Oil Coolers
Crankshaft Including Front And Rear Crankshaft
SealsDrive Shaft with Universal Joints Starter And Starter Solenoid Hydraulic Pumps
Cylinder Heads/ Head Gaskets Electronic Transmission Controller and Valve Switches Hydraulic Reservoir
Cylinder Liners Enclosed Oil Immersed Chains and Sprockets Traction Control System Hydraulic Valves
Diesel Exhaust Fluid Tank and Dispensing System External Oil Lines Voltage Regulator Internal O-Rings and Bonded Washers
Diesel Particulate Filter Filler Tubes (Transmission) Wiring Harnesses Pilot Control
EGR System Manifold Final Drive Pinion Wiring Harnesses Exclusions Pressure Reducing Valves
Electronic Engine Control Module Final Drive Planetary Gears Rubbing, Chafi ng, Loose Or Corroded Connections Unloading Valves
Engine Block Front Wheel Drive SensorsFACTORY INSTALLED HEAT
AND AIR CONDITIONINGSTRUCTURAL
Engine Mounts And Supports Hydraulic Drive / Travel Motor Accumulator Backhoe Booms
Engine Oil Cooler Hydraulic Drive Pump Clutch Backhoe/Excavator Dipper Sticks
Engine Speed Controls, Linkages, and Cables Hydraulic Transmission-Control Valve Compressor C Frame
Exhaust Manifold and Muffl er Hydrostatic Motor Condenser Car Body
Fan And Fan Drive Hydrostatic Transmission Charge Pump Dryer Chassis
Filter Mount Hydrostatic Transmission Pump Evaporator Circle Frame
Flywheel, Ring Gear Hydrostatic/Hydraulic Pump Drives Expansion Valve Engine Frame
Front And Rear Engine Covers And Seals Internal Lubricated Clutch Housings Heater Core Equipment Frame
Front Damper Internal Transmission Control Linkage Hoses Excavator Booms
Fuel Lines Internal Wet Service Brakes Pulley Falling Object Protection Structure (FOPS)
Fuel TankMFWD Axle/Differential Assembly including
Driveshaft and U JointSeals & Gaskets Forklift Masts
Fuel Transfer Pump & Gasket Planetary Gear Carrier Temperature Control Programmers and ValvesInner and Outer Dipper Arms of the Extendable
Boom (Backhoe Loader)
Injection Pump Pneumatic Valves OPERATOR AREA Main Frame
Injectors Rotary Hydraulic Manifold Covers and Panels Rollover Protection Structure (ROPS)
Intake and Exhaust Manifold And Gaskets Splitter Drive/Drop Box Exterior/Interior Door/Panel Latches, Hinges & Struts Swing Frame
Oil Filler Tube Steering Clutches (Wet) Exterior/Interior Moldings Swing Tower Castings (Backhoe Loader)
Oil Lines Swing Motor And Swing Gear Box Knobs for Switches and Handles Track Frame
Oil Pan And Gasket Torque Converter Mirrors Wheel Loader/Skid steer Loader Arms
Oil Pump Torque Converter Pump Seat Frame & Suspension
Pistons & Rings Transfer Drive
Pre-Cleaner/Air Cleaner Housing Transmission Case
Pressure/Temperature Sensors & Sending Units Transmission Gears, Bearings, & Shafts
Pulleys Transmission Pump
Radiator Travel & Swing Sections (only) Of Main Control Valve
Rocker Arm Assembly Travel Control Valve
Selective Catalytic Reduction System Turntable Bearing
Thermostats Undercarriage Roller And Idler Seals And Bearings
Timing Gears Undercarriage Tensioners
Turbocharger And GasketUNDERCARRIAGE EXCLUSIONS:
Sprocket, Tracks, Pads, Bolts, Chains, Or Any Failure
Due To Wear, Or Breakage Caused By Wear
Valve Cover And Gasket
Water Piping
Water Pumps
This plan excludes coverage for any failure to any component
caused by or resulting from the failure of a component not listed
as a covered component, including any resulting damage to a
listed component. See the Terms and Conditions document for
complete plan details.
7
8
CX B SERIES COMPACT EXCAVATOR
CX27B
EngineEngine model _________________________ Yanmar 3TNV82A-BEngine type ______ Diesel, water cooled, 3 cylinders, direct injectionNet power _____________________ 18.1 kW / 24 hp @ 2400 rpm
Hydraulic systemType _________________2 x Tandem variable displacement pumpMaximum capacity _______________ 2 x 7,6 gpm (2 x 28.8 L/min)
Operating weightOperating weight (Canopy) _________________ 6,327 lb (2870 kg)Operating weight (Cab) ____________________ 6,657 lb (3020 kg)
Specifi cations
General dimensions and digging performance
DIMENSIONS
3 ft 10 in (1.18 m) Arm
A Overall height 8 ft 2 in (2.51 m)
B Overall length 14 ft 9 in (4.51 m)
C Width of upperstructure 5 ft 0 in (1.53 m)
D Track overall length 7 ft 1 in (2.16 m)
E Track overall width w/11.8 in (300 mm) shoes 5 ft 1 in (1.55 m)
F Track shoe width 11 in (300 mm)
G Center to center (idler to sprocket) 5 ft 6 in (1.70 m)
H Upperstructure ground clearance 1 ft 10 in (570 mm)
J Minimum ground clearance 0 ft 11 in (300 mm)
K Tail swing radius 2 ft 6 in (775 mm)
L Backfi ll blade height 1 ft 1 in (345 mm)
L Backfi ll blade width 5 ft 1 in (1550 mm)
M Maximum dig reach 15 ft 10 in (4.84 m)
N Digging reach at ground level 15 ft 4 in (4.68 m)
P Maximum dig depth 8 ft 5 in (2.59 m)
Q Dump height 10 ft 1 in (3.09 m)
R Overall reach height 14 ft 8 in (4.48 m)
T Vertical straight wall dig depth 7 ft 5 in (2.27 m)
Arm digging force ISO 3,596 lbf (16,6 kN)
Bucket digging force ISO 5,395 lbf (24,7 kN)
Ground pressure (Cab) 3.8 psi (26.3 kPa)
Ground pressure (Canopy) 3.6 psi (24.9 kPa)
DIGGING PERFORMANCE
9
CX B SERIES COMPACT EXCAVATOR
CX31B
EngineEngine model _________________________ Yanmar 3TNV82A-BEngine type ______ Diesel, water cooled, 3 cylinders, direct injectionNet power _____________________ 18.1 kW / 24 hp @ 2400 rpm
Hydraulic systemType _________________2 x Tandem variable displacement pumpMaximum capacity _____________ 2 x 10,14 gpm (2 x 38.4 L/min)
Operating weightOperating weight (Canopy) _________________ 7,275 lb (3300 kg)Operating weight (Cab) ____________________ 7,605 lb (3450 kg)
Specifi cations
General dimensions and digging performance
DIMENSIONS
4 ft 3 in (1.32 m) Arm
A Overall height 8 ft 2 in (2.51 m)
B Overall length 15 ft 6 in (4.73 m)
C Width of upperstructure 5 ft 0 in (1.53 m)
D Track overall length 7 ft 1 in (2.16 m)
E Track overall width w/11.8 in (300 mm) shoes 5 ft 1 in (1.55 m)
F Track shoe width 11 in (300 mm)
G Center to center (idler to sprocket) 5 ft 6 in (1.70 m)
H Upperstructure ground clearance 1 ft 10 in (570 mm)
J Minimum ground clearance 0 ft 11 in (300 mm)
K Tail swing radius 2 ft 6 in (775 mm)
L Backfi ll blade height 1 ft 1 in (345 mm)
L Backfi ll blade width 5 ft 1 in (1550 mm)
M Maximum dig reach 17 ft (5.2 m)
N Digging reach at ground level 16 ft 6 in (5.04 m)
P Maximum dig depth 9 ft 3 in (2.82 m)
Q Dump height 11 ft 2 in (3.42 m)
R Overall reach height 15 ft 8 in (4.8 m)
T Vertical straight wall dig depth 7 ft 8 in (2.36 m)
Arm digging force ISO 4,294 lbf (19,1 kN)
Bucket digging force ISO 6,227 lbf (27,7 kN)
Ground pressure (Cab) 4.4 psi (30.1 kPa)
Ground pressure (Canopy) 4.2 psi (28.7 kPa)
DIGGING PERFORMANCE
10
CX B SERIES COMPACT EXCAVATOR
CX36B
EngineEngine model _________________________ Yanmar 3TNV82A-BEngine type ______ Diesel, water cooled, 3 cylinders, direct injectionNet power _____________________ 18.1 kW / 24 hp @ 2400 rpm
Hydraulic systemType _________________2 x Tandem variable displacement pumpMaximum capacity _____________ 2 x 10,14 gpm (2 x 38.4 L/min)
Operating weightOperating weight (Canopy) _________________ 8,157 lb (3700 kg)Operating weight (Cab) ____________________ 8,488 lb (3850 kg)
Specifi cations
General dimensions and digging performance
DIMENSIONS
4 ft 5 in (1.37 m) Arm
A Overall height 8 ft 2 in (2.51 m)
B Overall length 15 ft 9 in (4.82 m)
C Width of upperstructure 5 ft 0 in (1.53 m)
D Track overall length 7 ft 1 in (2.16 m)
E Track overall width w/11.8 in (300 mm) shoes 5 ft 6 in (1.7 m)
F Track shoe width 11 in (300 mm)
G Center to center (idler to sprocket) 5 ft 6 in (1.70 m)
H Upperstructure ground clearance 1 ft 10 in (570 mm)
J Minimum ground clearance 0 ft 11 in (300 mm)
K Tail swing radius 2 ft 9 in (850 mm)
L Backfi ll blade height 1 ft 1 in (345 mm)
L Backfi ll blade width 5 ft 6 in (1700 mm)
M Maximum dig reach 17 ft 6 in (5.35 m)
N Digging reach at ground level 17 ft (5.2 m)
P Maximum dig depth 10 ft (3.05 m)
Q Dump height 11 ft 5 in (3.49 m)
R Overall reach height 15 ft 11 in (4.87 m)
T Vertical straight wall dig depth 8 ft 1 in (2.47 m)
Arm digging force ISO 5,035 lbf (22,4 kN)
Bucket digging force ISO 6,250 lbf (27,8 kN)
Ground pressure (Cab) 4.8 psi (33.5 kPa)
Ground pressure (Canopy) 4.7 psi (32.2 kPa)
DIGGING PERFORMANCE
11
CX B SERIES COMPACT EXCAVATOR
CX55Bx
EngineEngine model __________________________ Yanmar 3TNV88-BEngine type ______ Diesel, water cooled, 4 cylinders, direct injectionNet power ___________________ 29.5 kW / 39.6 hp @ 2400 rpmElectrical system voltage _____________________________ 12v
Hydraulic systemType _________________2 x Tandem variable displacement pumpMaximum capacity _____________ 2 x 13,18 gpm (2 x 49.9 L/min) Operating weightOperating weight (Canopy - Rubber shoes) ____ 10,979 lb (4980 kg)Operating weight (Cab - Rubber shoes) _______ 11,243 lb (5100 kg)
UndercarriageTravel speed _________________________ 2.3 km/h - 4.0 km/hGradeability (degrees) ________________________________30Ground pressure (Cab) ____________________4.16 psi (28.7 kPa)Ground pressure (Canopy) __________________ 4.06 psi (28 kPa)Track shoe width ________________________ 1 ft 3 in (400 mm)Drawbar pull kn ___________________________________ 54.9
Dozer Bladeheight ________________________________ 1 ft 1 in (345 mm)width _______________________________ 6 ft 5 in (1960 mm)
SwingSwing speed rpm ___________________________________ 8.8
Specifi cations
General dimensions and digging performance
DIMENSIONS
5 ft 6.5 in (1.66 m) Arm
A Overall height 8 ft 4 in (2.53 m)
B Overall length 17 ft 10 in (5.50 m)
C Width of upperstructure 6 ft 4 in (1.94 m)
D Track overall length 8 ft 1 in (2.50 m)
E Track overall width w/11.8 in (300 mm) shoes 6 ft 5 in (1.96 m)
G Center to center (idler to sprocket) 6 ft 6 in (2.0 m)
H Upperstructure ground clearance 1 ft 11 in (605 mm)
J Minimum ground clearance 1 ft 1 in (345 mm)
K Tail swing radius 3 ft 10 in (1170 mm)
M Maximum dig reach 20 ft 5 in (6.24 m)
N Digging reach at ground level 20 ft (6.1 m)
P Maximum dig depth 12 ft 9 in (3.9 m)
Q Dump height 14 ft 3 in (4.35 m)
R Overall reach height 19 ft 5 in (5.93 m)
T Vertical straight wall dig depth 10 ft 3 in (3.14 m)
Arm digging force ISO 5,530 lbf (24,6 kN)
Bucket digging force ISO 7,913 lbf (35,2 kN)
DIGGING PERFORMANCE
www.casece.com
CustomerAssistance
1300 99 CASE
AUSTRALIA:31-53 Kurrajong RoadSt. Marys NSW 2760
Form No. - ANZ4302CCGB - Printed in Australia - MediaCross Firenze - 11/14
NOTE: CASE provides specifi c outfi ts for
various countries and many optional fi ttings (OPT). The illustrations on
this or other leafl ets may relate to standard or optional fi ttings. Please
consult your CASE dealer for any information in this regard and any possible updating on components.
CNH Industrial reserves the right to modify machine specifi cations
without incurring any obligation relating to such changes.
Conforms to directive 2006/42/EC
You can count on Case and your Case dealer for full-service solutions-productive equipment, expert advice, fl exible fi nancing, genuine Case parts and fast service.We’re here to provide you with the ultimate ownership experience.
To locate a Case dealer or learn more about Case equipment or customer service, go to www.casece.com. For fl exible fi nancing options, dependable parts and fast service, your Case dealer is here to meet your needs.
It all adds up. You can count on Case.
You can count on Case