CWDM & DWDM Multiservice Platform - … · CWDM and DWDM optical technology with carrier-class...
2
PGT Photonics Features subject to change - not contractually valid unless specifically authorized by Pirelli © 2008 PGT Photonics S.p.A. All rights reserved - Printed in Italy n CWDM & DWDM Metro Access and Metro Core System CWDM & DWDM Multiservice Platform City+ combines CWDM and DWDM optical technology with carrier-class features With its modular and compact design, City+ is ideal for the enterprise and telecom operator offering low upfront investment, high-scalability equipment, and providing high-bandwidth, managed services over a single fiber pair. City+ provides up 16 CWDM channels with the option to carry up to 16 DWDM channels, and it also supports TDM and Datacom interfaces. By adopting a field programmable electronic core and pluggable (SFP/XFP) optical transceivers you can enable fewer transponder units that are configured to address all possible network applications. Sub-lambda multiplexing allows efficient lambda use and maintains transparent client services. The local craft terminal and CityEM™ NE manager can greatly benefit from City+’s comprehensive OAM&P feature set. The CORBA northbound interface exported by CityEM™ allows the telecom operator to integrate City+ into the network management chain. As a result of its distinct components and design, City+ makes flexible high- bandwidth provisioning at a substantially lower cost a reality.
Transcript of CWDM & DWDM Multiservice Platform - … · CWDM and DWDM optical technology with carrier-class...
PGT Photonics
Features subject to change - not contractually valid unless specifically authorized by Pirelli
© 2008 PGT Photonics S.p.A.All rights reserved - Printed in Italy
nCWDM & DWDM Metro Access and Metro Core System
CWDM & DWDM Multiservice
Platform
City+ combines CWDM and DWDM
optical technology with carrier-class features
With its modular and compact design, City+ is ideal for
the enterprise and telecom operator offering low upfront
investment, high-scalability equipment, and providing high-bandwidth, managed
services over a single fiber pair. City+ provides up 16 CWDM channels with the
option to carry up to 16 DWDM channels, and it also supports TDM and Datacom
interfaces. By adopting a field programmable electronic core
and pluggable (SFP/XFP) optical transceivers you can
enable fewer transponder units that are configured to
address all possible network applications.
Sub-lambda multiplexing allows efficient lambda use and maintains transparent client services. The local craft terminal and CityEM™ NE manager can greatly benefit from City+’s comprehensive OAM&P feature set. The CORBA northbound interface exported by CityEM™ allows the telecom operator to integrate City+ into the network management chain. As a result of its distinct components and design, City+ makes flexible high-bandwidth provisioning at a substantially lower cost a reality.
City
_04/
2008
PGT Photonics
Features subject to change - not contractually valid unless specifically authorized by Pirelli
© 2008 PGT Photonics S.p.A.All rights reserved - Printed in Italy
PGT Photonics S.p.A. Viale Sarca, 222 - 20126 Milano – ItalyFax: +39 02 6442 7811
U.S. Sales Office75 Fifth Street NW Suite 320Atlanta, GA 30308 USAPhone: +404 920 0749Fax: +404 920 0748
nCWDM &DWDM Metro Access and Metro Core System
CWDM & DWDM Multiservice Platform
APPLICATIONS • Metro Access Rings • Metro Core Rings• Point-to-Point CPE• Channel Protection • Enterprise Network
TECHNICAL CHARACTERISTICS Item ValueMaximum CWDM capacity 16 protected channelsMaximum DWDM capacity 16 protected channels
Maximum mixed capacity 22 protected channels (16 DWDM @ 2.5/10G + 6 CWDM @ 2.5G)
Maximum client frequency 10 Gb/s (1)
PerformancesTwo ranges of application: Intermediate Reach [~35 km] and Long Reach [~65 km(2)]
Number of hops Up to 8(3) - This means overall reach up to 500 km
Client InterfacesOC-3/12/48/192, STM- 1/4/16/64, Gigabit Ethernet, 10 Gigabit Ethernet, Fiber Channel, FICON®, ATM, IP
Sub-lambda Grooming GbE (2x), FC (2x)SDH STM- 1/4 (4x)
Optical Protection Options 1+1, Y-cable, Optical UPSRSystem Configurations Point-to-Point, Bus, 2-fiber ring
Dimensions
Stackable 3RU 19” Shelf (fits in standard 300mm ETSI cabinet)2RU 19” FAN Shelf integrating fiber tray
Power Supply Redundant 110/220 VAC
or - 48/ - 60 VDC
Supervision Fast Ethernet carried over Optical Supervision Channel
Management
SNMP-basedGUI on LCTCityEMTM Element Manager, with CORBA northbound interface
SW/FW ManagementRemote SW/FW download,not traffic affecting
(1) Only 2 channels @ 10G for CWDM (2) With Pirelli in-house technology XFP(3) Due to 3R regeneration
Availability of 10 Gb/s transponderssupports network evolution
Availability of AC and DC power supply fits both CO and CP applications.
Optical protection at channel level allows individual protection option.
Small footprint and low power consumption enables superior system integration.
FEATURES
• Carrier-class platform • CWDM and DWDM line interfaces• 10 Gb/s clients carried over CWDM or DWDM channels • Single transponder unit with pluggable optical transceivers (CWDM or DWDM)• Complete TDM and Datacom interface support • Reach extension thru 3R regeneration • Sub-lambda multiplexing• Optical protection• Performance monitoring • SNMP-based supervision• CLEI Codes • G.694.1 and G.694.2 compliant • G.695 compliant
APPLICATIONS
• Metro Access Rings • Metro Core Rings• Point-to-Point CPE• Channel Protection• Enterprise Network
