cv

4
Haider Abbas Khadayer [email protected] +964-7709607984 +964-7802466515 Education June 2011 AL-MUSTANSIRIYAH UNIVERSITY Baghdad B.Sc. in Mechanical Engineering Relevant courses Mechanics: Dynamics, Kinematics, Mechanics of Material, Engineering Materials. Thermo-fluid: Thermodynamics, Advanced Heat Transfer and Mass Transfer, Fluid Mechanics, Fluid Machinery, Aerodynamics, Cryogenics, Air Conditioning System, Vacuum Pumps Computing: Numerical Techniques in Mechanical Engineering, Computational Fluid Dynamics (CFD) Experience Worked in Diesel power plant north AL-Diwaniyah STX marine services Co.(2011.11.1~ 2012.2.21) Worked in Diesel power plant in Karbala site for STX marine services Co. (2012.02.21~2015.03.31) Designer electrical boards in Al-Ebtida Co.Ltd company (2015.10.05 ~ 20.2.2016) https://www.facebook.com/Al-Ebtida-CoLtd-147331462004399/ Worked with WOOLIM PLANT engineering & construction Co., Ltd. (23.2.2016 ~ 25.5.2016) Worked pipes system and commissioning, operating and maintenance diesel engines. Overhaul all parts of diesel engines. I installed a number of operating systems and software. Worked in different offices to installation and formation the computers. I built a vertical heat exchanger led to its use as a laboratory in college. Job tasks Overhauling main parts of engines such as : turbochargers , cylinder head, liner, piston, air cooler, lubricating oil cooler, nozzle cooling oil, water pumps, oil pumps ,thermostat valves, heat exchangers ,solenoid valves, camshaft ,connecting rod , crank shaft , balance weight , main bearing ,governor. Alignment test, deflection test in crank shaft, non destructive tests (NDT) such as: penetrate tests (PT), visual tests (VT) level ll depend on ASME standards. Overhauling auxiliary systems: purifiers, boiler, booster, water treatment unit, air compressors, different types of pumps such as gear pumps, circulation pumps, and centrifugal pumps. Handled welding assignments that involved installing, repairing and fabricating materials (sheet metal, steel, tools, parts, and more). Became adept at reading blueprints/drawings and fulfilling work orders.

Transcript of cv

Haider Abbas Khadayer [email protected]

+964-7709607984

+964-7802466515

Education

June 2011 AL-MUSTANSIRIYAH UNIVERSITY

Baghdad

B.Sc. in Mechanical Engineering

Relevant courses

Mechanics: Dynamics, Kinematics, Mechanics of Material, Engineering Materials.

Thermo-fluid: Thermodynamics, Advanced Heat Transfer and Mass Transfer, Fluid Mechanics, Fluid

Machinery, Aerodynamics, Cryogenics, Air Conditioning System, Vacuum Pumps

Computing: Numerical Techniques in Mechanical Engineering, Computational Fluid Dynamics (CFD)

Experience

Worked in Diesel power plant north AL-Diwaniyah STX marine services Co.(2011.11.1~ 2012.2.21)

Worked in Diesel power plant in Karbala site for STX marine services Co. (2012.02.21~2015.03.31)

Designer electrical boards in Al-Ebtida Co.Ltd company (2015.10.05 ~ 20.2.2016)

https://www.facebook.com/Al-Ebtida-CoLtd-147331462004399/

Worked with WOOLIM PLANT engineering & construction Co., Ltd. (23.2.2016 ~ 25.5.2016)

Worked pipes system and commissioning, operating and maintenance diesel engines.

Overhaul all parts of diesel engines.

I installed a number of operating systems and software.

Worked in different offices to installation and formation the computers.

I built a vertical heat exchanger led to its use as a laboratory in college.

Job tasks

Overhauling main parts of engines such as : turbochargers , cylinder head, liner, piston, air cooler,

lubricating oil cooler, nozzle cooling oil, water pumps, oil pumps ,thermostat valves, heat exchangers

,solenoid valves, camshaft ,connecting rod , crank shaft , balance weight , main bearing ,governor.

Alignment test, deflection test in crank shaft, non destructive tests (NDT) such as: penetrate tests (PT),

visual tests (VT) level ll depend on ASME standards.

Overhauling auxiliary systems: purifiers, boiler, booster, water treatment unit, air compressors, different

types of pumps such as gear pumps, circulation pumps, and centrifugal pumps.

Handled welding assignments that involved installing, repairing and fabricating materials (sheet metal,

steel, tools, parts, and more). Became adept at reading blueprints/drawings and fulfilling work orders.

Demonstrated advanced skills in operating equipment and machines including CNC machines, cutting

machines and hydraulic presses for the fabrication of mechanical components.

Skills and activities

Language:

Good commend of English both written and spoken.

Computer skill:

Microsoft office programs (Excel , Word , PowerPoint)

Installation and formation for computers

Skillful in the use of the Internet

Auto Cad : 2D

Training Session:

Name of Session: IC3 (Internet and Computing Core Certification)

Place of Session: AL-MUSTANSIRIYAH UNIVERSITY IN BAGHDAD

Career Objective:

I hope to get a job Mechanical engineer in your company that is seeking to develop their staff so

that I develop myself applying my knowledge and my skills in my field.

Professional Membership:

Member in the Iraqi engineers union.