CV Simon Risi (*1991, Unterseen) Mail: [email protected] ...
Transcript of CV Simon Risi (*1991, Unterseen) Mail: [email protected] ...
CV
Simon Risi (*1991, Unterseen)Mail: [email protected]: simonrisi.ch
Exhibitions:2019To Grotto | Grotto | BrusselsUntitled | Gepäcksausgabe | Glarus
2018Ohne Titel | Khôra | Zurich (Solo)Habt Leid | Perle | Berlin (DEU)BA - Diplomashow | ZHdK | ZurichZigarettenverpackung | Spieglerey | ZurichVogelhäuschen | Hamlet | Oerlikon
2017Towers | Lux-Gyger-Weg | Zurich() | Hegi Grüze | WinterthurBone19 Festival | Schlachthaus Theater Bern | Bernbuffering | ZHdK | ZurichSKILT Festival | Stadgalerie Bern | BernLyrischer Moment_Löffel zum Mund | #Löffel | Berlin (DEU)Can you roll with me | Les Mouches | GenfFluidum | Kulturhaus Helferei | Zürich
2016ACT Performance Festival | Théâtre de l‘Usine | GenfDe-Neutralize | Johann Jacobs Museum | ZürichSchaustelle Vol.2 | Dynamo | ZürichAthens Biennale | Tacharia-Square | Athens (GRC)
Projects2017 - Today Off-Space Khôra with Samuel Koch and Manuel Market | Zurich2014, 2015 and 2016 Organisation SKILT-Festival with Elisabeth Caesar | Stadtgalerie Bern
School2015 - 2018 BA Art an Media | Main Subject - Installation | School of Arts Zurich2013 - 2015 BA Architecture | Berner Fachhochschule | Burgdorf2007 - 2011 Apprenticeship as draughtsman | Artbau, Atelier für Architektur | Wilderswil
Awards2018 ZHdK promotional award | Project „Blütenzeitraubend“ | Zurich
Radio1 14.01.2019 12h delay, 2019 Installation/Program, Recording from Radio1 (Flemish State Radio Station in Brussels) 07:00-11:00 played at 19:00 to 23:00 on Boombox, To Grotto, Brussels
installation view
This application automatically records the chosen radio station and broadcasts the recording 12 hours later. The recordings are deleted after five minutes, so with a delay of 12 hours and 5 minutes after their initial broadcastings. The exhibition space is located in a former laundry room. The speakers were placed direc-tly by the stairs leading downstairs. The programmed application can record and broadcast any digital radio station in the world with a delay.
Blütenzeitraubend, 2018Program for controlling frequency inverters in lift no. 10430763-1 (ZH01-02S), 17kB, ZHdK BA - Diploma exhibition, Zurich
Approximately 2800 people study and work at the Zu-rich University of the Arts. All departments are located within one large building. There are five elevators in order to move throughout the eight floors. The three most commonly used elevators are next to each other, in close proximity to the main entrance.The middle one of the three elevators is slowed down.The company Schindler developed a program for the work, which regulates the frequency converter in the elevator. Thanks to this program I was able to slow down the elevator by exactly 0,00m/s. The final veloci-ty of the middle elevator was adjusted to 5,57m/s and now needed 26 seconds to travel between to floors. The other two elevators were not adjusted and continu-ed to operate normally.Neither in front nor in the elevator was there any war-ning or indication of the workThe work was implemented one week ahead of the opening of the exhibition so students and personnel could discuss or warn each other about the elevator.The only indication of the work was placed in the exhi-bition spaces of the Department of Arts and Media via a regular sticker used to attribute works to the res-pective artists. Additionally, when people complained or pointed out something about the elevator to facility management, they were given a text by Christian Seiler titled „Das Perfekte Rührei“ [The perfect scrambled egg].There were no recordings made inside the elevator. The stories which developed within the setting should stay with the people who met inside it und experienced the work.People with claustrophobia were contacted in advance in order to estimate the risk, which the deceleration would cause so any harm to people could be avoided.
Blütenzeitraubend, 2018Program for controlling frequency inverters in lift no. 10430763-1 (ZH01-02S), 17kB, ZHdK BA - Diploma exhibition, Zurich
The „Heart“ of the lift
Untitled, October 2017 - February 2018Installation view from 05.10.2017 - 1/6 Yellow, Khôra, Zurich
Text on invite:simon risi colors the roomfloor - ceiling - wallonce a monthsix times in total
Procedure of an evening:The space is open to visitors once a month from 7pm to 12am. The space was painted in advance by Simon Risi alone in one color. The day after, the space is re-painted white. During the exhibition, vi-sitors are allowed in the room one by one. Only one person is allowed in the room at a time. The visitors are not aware of the act of painting the room.
Untitled, October 2017 - February 2018Installation view from 04.01.2018 - 4/6 Violet, Khôra, Zurich
Untitled, October 2017 - February 2018Installation views, 01.02.2018 - 5/6 Red, 07.12.2017 - 3/6 Green, 09.11.2017 - 2/6 Blue, 20.02.2018 - 6/6 Orange, Khôra, Zurich
Mathematical Moment, 2017 - todayInkjet Print framed, 90x60cm, series of 5 pieces
The calculations on the following pages are entirely made up.However, they seem comprehensible to the viewer.There is no indication of the calculations being false.The drawings are in a scale of 1:1.
Mathematical Moment, 2017 - todayInkjet Print framed, 90x60cm, series of 5 pieces
Unprinted PDF file | Snipping a five franc piece installation view, Exhibition: buffering, Zürcher Hochschule der Künste
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm0.
235c
m
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
00.5 01.0 01.5 02.0 02.5 03.0 03.5 04.0 04.5 05.0 05.5 06.0 06.5 07.0 07.5 07.0 08.5 09.0 09.5 10.0
10.5
11.0
11.5
12.012.513.013.514.014.515.015.516.016.517.017.518.018.519.019.520.020.521.021.522.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
km
n
psi
r‘
r
Ωn
3.145cm
0.235cm
8.05 daumen anfang bis ende
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht
13.2g
Newton
0.01294477799999n
Legierung 75%
Kupfer / 25% Nickel
y‘achse
-x‘achse
yachse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m
2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I1 Ω
1 +(I3 - I2 ) Ω2 Ω
3 = 1.68nm/2
mathem
atischer mom
entSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.10.8
0.70.6
0.50.4
0.30.2
1.00.9
1.81.7
1.61.5
1.41.3
1.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathem
atischer mom
entschnippen eines fünffrankenstücks
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
00.5 01.0 01.5 02.0 02.5 03.0 03.5 04.0 04.5 05.0 05.5 06.0 06.5 07.0 07.5 07.0 08.5 09.0 09.5 10.0
10.5
11.0
11.5
12.012.513.013.514.014.515.015.516.016.517.017.518.018.519.019.520.020.521.021.522.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
km
n
psi
r‘
r
Ωn
3.145cm
0.235cm
8.05 daumen anfang bis ende
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht
13.2g
Newton
0.01294477799999n
Legierung 75%
Kupfer / 25% Nickel
y‘achse
-x‘achse
yachse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m
2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I1 Ω
1 +(I3 - I2 ) Ω2 Ω
3 = 1.68nm/2
mathem
atischer mom
entSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.10.8
0.70.6
0.50.4
0.30.2
1.00.9
1.81.7
1.61.5
1.41.3
1.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathem
atischer mom
entschnippen eines fünffrankenstücks
00.5 01.0 01.5 02.0 02.5 03.0 03.5 04.0 04.5 05.0 05.5 06.0 06.5 07.0 07.5 07.0 08.5 09.0 09.5 10.0
10.5
11.0
11.5
12.012.513.013.514.014.515.015.516.016.517.017.518.018.519.019.520.020.521.021.522.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
km
n
psi
r‘
r
Ωn
3.145cm
0.235cm
8.05 daumen anfang bis ende
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht
13.2g
Newton
0.01294477799999n
Legierung 75%
Kupfer / 25% Nickel
y‘achse
-x‘achse
yachse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m
2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I1 Ω
1 +(I3 - I2 ) Ω2 Ω
3 = 1.68nm/2
mathem
atischer mom
entSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.10.8
0.70.6
0.50.4
0.30.2
1.00.9
1.81.7
1.61.5
1.41.3
1.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathem
atischer mom
entschnippen eines fünffrankenstücks
00.5 01.0 01.5 02.0 02.5 03.0 03.5 04.0 04.5 05.0 05.5 06.0 06.5 07.0 07.5 07.0 08.5 09.0 09.5 10.0
10.5
11.0
11.5
12.012.513.013.514.014.515.015.516.016.517.017.518.018.519.019.520.020.521.021.522.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
km
n
psi
r‘
r
Ωn
3.145cm
0.235cm
8.05 daumen anfang bis ende
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht
13.2g
Newton
0.01294477799999n
Legierung 75%
Kupfer / 25% Nickel
y‘achse
-x‘achse
yachse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m
2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I1 Ω
1 +(I3 - I2 ) Ω2 Ω
3 = 1.68nm/2
mathem
atischer mom
entSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.10.8
0.70.6
0.50.4
0.30.2
1.00.9
1.81.7
1.61.5
1.41.3
1.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathem
atischer mom
entschnippen eines fünffrankenstücks
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
Mathematical Moment, 2017 - todayInkjet Print framed, 90x60cm, series of 5 pieces
Unprinted PDF file | Get moving - Situation: Repulsive foot
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
mathematischer momentsich in bewegung setzen - Situation: abstossender fuss
05.0
10.0
15.0
20.0
25.0
30.0
35.0
uk fersen an sohle
in cm
05.000.0-05.0 10.0 15.0 20.0 25.0 30.0 35.0-10.0-15.0
Hinterkante Schuh
28.3
vorderkante Schuh28.3cm
max. uk bei Entlastung Standbein
15.8cm
Abtr
ittsw
inke
l 42.
2°gr
össt
e bel
astu
ng b
ei 2
1.1°
reibungsenergie beim Lostritt
Wfric
= eth
= ffric
(x) * dx = Ωk
fn (x) * dx =
0.000457w
Wobei:
ffric
= die Reibungskraft
Fn = die andrückende Normalkraft
Ωk = den Gleitreibungskoeffizienten
x = die Position des Objekts darstellt
Sich in Bewegung setzten:
Zu Erreichende Geschwindigkeit 5km/h oder 1.38m/s (Durchschnittliche Gehgeschwindigkeit in Europa)
erreicht in 0.6m
a = ( ve² - v
0² ) / ( 2 * s ) = 1.5869m/s2
Durchschnittliche Belastung des bodens
kg * g = 70 * 9.81 = 686.7 n
kalorienverbrauch pro schritt
wobei:
Person 70kg
schrittlänge 60cm
Durchschnittswert pro Schritt 0.03kcal
energieerzeugung pro schritt in watt
P(w)
= E(j)
/ t(s)
P(w)
= 0.12552 / 0.6 = 0.2092W
wobei:
E(j)
= energie in Joule (errechnet durch kcal)
t(s)
= sekunden
fr
fg
fr
fgh f
gn
fg
h
fgn
fg
fgh
fr
schematische darstellung der potentiellen energie des schuhs währen dem schritt
epot
= ug = f
gh = mgh
00.501
.001.502
.002.503
.003.504
.004.505
.005.506
.006.507
.007.507
.008.509
.009.5
10.0
10.5
11.0
11.5
12.0
12.5 13
.0 13.5 14
.0 14.5 15
.0 15.5 16
.0 16.5 17
.0 17.5 18
.0 18.5 19
.0 19.5 20
.0 20.5 21
.0 21.5 22
.000
.0
anza
hl r
otat
ione
n in
Um
dreh
unge
n
360°
= 1
Um
dreh
ung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koor
dina
ten
des f
ünff
rank
estü
cks
km
n
psi
r‘
r
Ωn
3.14
5cm
0.235cm
8.05 daumen anfang bis ende
anza
hl r
otat
ione
n in
um
dreh
unge
n
tota
l in
Grad
= 7
920°
ansi
cht
seit
enri
ssgr
undr
iss
fünf
fran
kens
tück
gew
icht
13
.2g
New
ton
0.
0129
4477
7999
99n
Legi
erun
g 75
% K
upfe
r / 2
5% N
icke
l
y‘ achs
e
-x‘
achs
e
y achs
e
xac
hse
Dreh
impu
ls
l c = (
r - c
) *
p = 0
.932
(kg*
m2 )/
2
wob
ei:
r =
mes
spun
kt o
rt
c =
kre
uzpu
nkt +
abs
tand
ssek
tor
r°
p =
impu
ls
eule
rsch
e gle
ichu
ng o
der
Bew
egun
gsgl
eich
ung
M1 =
I 1 Ω1 +
(I 3 - I 2) Ω
2 Ω3 =
1.6
8nm
/2
mat
hem
atis
cher
mom
ent
SCHN
IPPE
N EI
NES F
ÜNFF
RANK
ENST
ÜCKS
Höhe
in c
m
besc
hleu
nigu
ng
V =
Vo -
g *
t = 8
.829
m/s
00.0
zeit
t
in se
kund
ent
0.1
0.8
0.7
0.6
0.5
0.4
0.3
0.2
1.0
0.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
benö
tigt
e zei
t von
absc
hlag
bis
ank
unft
auf h
andf
läch
e 1.8
s0.
0
mat
hem
atis
cher
mom
ent
schn
ippe
n ei
nes f
ünff
rank
enst
ücks
00.501
.001.502
.002.503
.003.504
.004.505
.005.506
.006.507
.007.507
.008.509
.009.5
10.0
10.5
11.0
11.5
12.0
12.5 13
.0 13.5 14
.0 14.5 15
.0 15.5 16
.0 16.5 17
.0 17.5 18
.0 18.5 19
.0 19.5 20
.0 20.5 21
.0 21.5 22
.000
.0
anza
hl r
otat
ione
n in
Um
dreh
unge
n
360°
= 1
Um
dreh
ung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koor
dina
ten
des f
ünff
rank
estü
cks
km
n
psi
r‘
r
Ωn
3.14
5cm
0.235cm
8.05 daumen anfang bis ende
anza
hl r
otat
ione
n in
um
dreh
unge
n
tota
l in
Grad
= 7
920°
ansi
cht
seit
enri
ssgr
undr
iss
fünf
fran
kens
tück
gew
icht
13
.2g
New
ton
0.
0129
4477
7999
99n
Legi
erun
g 75
% K
upfe
r / 2
5% N
icke
l
y‘ achs
e
-x‘
achs
e
y achs
e
xac
hse
Dreh
impu
ls
l c = (
r - c
) *
p = 0
.932
(kg*
m2 )/
2
wob
ei:
r =
mes
spun
kt o
rt
c =
kre
uzpu
nkt +
abs
tand
ssek
tor
r°
p =
impu
ls
eule
rsch
e gle
ichu
ng o
der
Bew
egun
gsgl
eich
ung
M1 =
I 1 Ω1 +
(I 3 - I 2) Ω
2 Ω3 =
1.6
8nm
/2
mat
hem
atis
cher
mom
ent
SCHN
IPPE
N EI
NES F
ÜNFF
RANK
ENST
ÜCKS
Höhe
in c
m
besc
hleu
nigu
ng
V =
Vo -
g *
t = 8
.829
m/s
00.0
zeit
t
in se
kund
ent
0.1
0.8
0.7
0.6
0.5
0.4
0.3
0.2
1.0
0.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
benö
tigt
e zei
t von
absc
hlag
bis
ank
unft
auf h
andf
läch
e 1.8
s0.
0
mat
hem
atis
cher
mom
ent
schn
ippe
n ei
nes f
ünff
rank
enst
ücks
00.501
.001.502
.002.503
.003.504
.004.505
.005.506
.006.507
.007.507
.008.509
.009.5
10.0
10.5
11.0
11.5
12.0
12.5 13
.0 13.5 14
.0 14.5 15
.0 15.5 16
.0 16.5 17
.0 17.5 18
.0 18.5 19
.0 19.5 20
.0 20.5 21
.0 21.5 22
.000
.0
anza
hl r
otat
ione
n in
Um
dreh
unge
n
360°
= 1
Um
dreh
ung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koor
dina
ten
des f
ünff
rank
estü
cks
km
n
psi
r‘
r
Ωn
3.14
5cm
0.235cm
8.05 daumen anfang bis ende
anza
hl r
otat
ione
n in
um
dreh
unge
n
tota
l in
Grad
= 7
920°
ansi
cht
seit
enri
ssgr
undr
iss
fünf
fran
kens
tück
gew
icht
13
.2g
New
ton
0.
0129
4477
7999
99n
Legi
erun
g 75
% K
upfe
r / 2
5% N
icke
l
y‘ achs
e
-x‘
achs
e
y achs
e
xac
hse
Dreh
impu
ls
l c = (
r - c
) *
p = 0
.932
(kg*
m2 )/
2
wob
ei:
r =
mes
spun
kt o
rt
c =
kre
uzpu
nkt +
abs
tand
ssek
tor
r°
p =
impu
ls
eule
rsch
e gle
ichu
ng o
der
Bew
egun
gsgl
eich
ung
M1 =
I 1 Ω1 +
(I 3 - I 2) Ω
2 Ω3 =
1.6
8nm
/2
mat
hem
atis
cher
mom
ent
SCHN
IPPE
N EI
NES F
ÜNFF
RANK
ENST
ÜCKS
Höhe
in c
m
besc
hleu
nigu
ng
V =
Vo -
g *
t = 8
.829
m/s
00.0
zeit
t
in se
kund
ent
0.1
0.8
0.7
0.6
0.5
0.4
0.3
0.2
1.0
0.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
benö
tigt
e zei
t von
absc
hlag
bis
ank
unft
auf h
andf
läch
e 1.8
s0.
0
mat
hem
atis
cher
mom
ent
schn
ippe
n ei
nes f
ünff
rank
enst
ücks
00.501
.001.502
.002.503
.003.504
.004.505
.005.506
.006.507
.007.507
.008.509
.009.5
10.0
10.5
11.0
11.5
12.0
12.5 13
.0 13.5 14
.0 14.5 15
.0 15.5 16
.0 16.5 17
.0 17.5 18
.0 18.5 19
.0 19.5 20
.0 20.5 21
.0 21.5 22
.000
.0
anza
hl r
otat
ione
n in
Um
dreh
unge
n
360°
= 1
Um
dreh
ung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koor
dina
ten
des f
ünff
rank
estü
cks
km
n
psi
r‘
r
Ωn
3.14
5cm
0.235cm
8.05 daumen anfang bis ende
anza
hl r
otat
ione
n in
um
dreh
unge
n
tota
l in
Grad
= 7
920°
ansi
cht
seit
enri
ssgr
undr
iss
fünf
fran
kens
tück
gew
icht
13
.2g
New
ton
0.
0129
4477
7999
99n
Legi
erun
g 75
% K
upfe
r / 2
5% N
icke
l
y‘ achs
e
-x‘
achs
e
y achs
e
xac
hse
Dreh
impu
ls
l c = (
r - c
) *
p = 0
.932
(kg*
m2 )/
2
wob
ei:
r =
mes
spun
kt o
rt
c =
kre
uzpu
nkt +
abs
tand
ssek
tor
r°
p =
impu
ls
eule
rsch
e gle
ichu
ng o
der
Bew
egun
gsgl
eich
ung
M1 =
I 1 Ω1 +
(I 3 - I 2) Ω
2 Ω3 =
1.6
8nm
/2
mat
hem
atis
cher
mom
ent
SCHN
IPPE
N EI
NES F
ÜNFF
RANK
ENST
ÜCKS
Höhe
in c
m
besc
hleu
nigu
ng
V =
Vo -
g *
t = 8
.829
m/s
00.0
zeit
t
in se
kund
ent
0.1
0.8
0.7
0.6
0.5
0.4
0.3
0.2
1.0
0.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
benö
tigt
e zei
t von
absc
hlag
bis
ank
unft
auf h
andf
läch
e 1.8
s0.
0
mat
hem
atis
cher
mom
ent
schn
ippe
n ei
nes f
ünff
rank
enst
ücks
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
00.5
01.0
01.5
02.0
02.5
03.0
03.5
04.0
04.5
05.0
05.5
06.0
06.5
07.0
07.5
07.0
08.5
09.0
09.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.000.0
anzahl rotationen in Umdrehungen
360° = 1 Umdrehung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koordinaten des fünffrankestücks
kmn
psi
r‘
r
Ωn
3.145cm
0.23
5cm
8.05
dau
men
anf
ang
bis e
nde
anzahl rotationen in umdrehungen
total in Grad = 7920°
ansicht
seitenrissgrundriss
fünffrankenstück
gewicht 13.2g
Newton 0.01294477799999n
Legierung 75% Kupfer / 25% Nickel
y‘achse
-x‘achse
y
achse
xachse
Drehimpuls
lc = ( r - c ) * p = 0.932(kg*m2)/2
wobei:
r = messpunkt ort
c = kreuzpunkt + abstandssektor r°
p = impuls
eulersche gleichung oder
Bewegungsgleichung
M1 = I
1 Ω
1 +(I
3 - I
2) Ω
2 Ω
3 = 1.68nm/2
mathematischer momentSCHNIPPEN EINES FÜNFFRANKENSTÜCKS
Höhe
in cm
beschleunigung
V = Vo - g * t = 8.829m/s
00.0
zeit t
in sekundent
0.1 0.80.70.60.50.40.30.2 1.00.9 1.81.71.61.51.41.31.21.1
benötigte zeit von
abschlag bis ankunft
auf handfläche 1.8s0.0
mathematischer momentschnippen eines fünffrankenstücks
Mathematical Moment, 2017 - todayInkjet Print framed, 90x60cm, series of 5 pieces
Unprinted PDF file | unscrewing of a 50cl PET bottle
00.501
.001.502
.002.503
.003.504
.004.505
.005.506
.006.507
.007.507
.008.509
.009.5
10.0
10.5
11.0
11.5
12.0
12.5 13
.0 13.5 14
.0 14.5 15
.0 15.5 16
.0 16.5 17
.0 17.5 18
.0 18.5 19
.0 19.5 20
.0 20.5 21
.0 21.5 22
.000
.0
anza
hl r
otat
ione
n in
Um
dreh
unge
n
360°
= 1
Um
dreh
ung.
05.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
koor
dina
ten
des f
ünff
rank
estü
cks
km
n
psi
r‘
r
Ωn
3.14
5cm
0.235cm
8.05 daumen anfang bis ende
anza
hl r
otat
ione
n in
um
dreh
unge
n
tota
l in
Grad
= 7
920°
ansi
cht
seit
enri
ssgr
undr
iss
fünf
fran
kens
tück
gew
icht
13
.2g
New
ton
0.
0129
4477
7999
99n
Legi
erun
g 75
% K
upfe
r / 2
5% N
icke
l
y‘ achs
e
-x‘
achs
e
y achs
e
xac
hse
Dreh
impu
ls
l c = (
r - c
) *
p = 0
.932
(kg*
m2 )/
2
wob
ei:
r =
mes
spun
kt o
rt
c =
kre
uzpu
nkt +
abs
tand
ssek
tor
r°
p =
impu
ls
eule
rsch
e gle
ichu
ng o
der
Bew
egun
gsgl
eich
ung
M1 =
I 1 Ω1 +
(I 3 - I 2) Ω
2 Ω3 =
1.6
8nm
/2
mat
hem
atis
cher
mom
ent
SCHN
IPPE
N EI
NES F
ÜNFF
RANK
ENST
ÜCKS
Höhe
in c
m
besc
hleu
nigu
ng
V =
Vo -
g *
t = 8
.829
m/s
00.0
zeit
t
in se
kund
ent
0.1
0.8
0.7
0.6
0.5
0.4
0.3
0.2
1.0
0.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
benö
tigt
e zei
t von
absc
hlag
bis
ank
unft
auf h
andf
läch
e 1.8
s0.
0
mat
hem
atis
cher
mom
ent
schn
ippe
n ei
nes f
ünff
rank
enst
ücks
supp
ensc
hüss
el 1
3.6c
m
achs
e 6.8
cmac
hse 6
.8cm
mat
hem
atis
cher
mom
ent
Grun
dris
s - lö
ffel
von
supp
ensc
hüss
el zu
m m
und
Löff
el 1
9.7c
m
suppenschüssel 13.6cm
achse 6.8cm achse 6.8cm
Tropfgefahr 7cm
Natürliches Einführen im Winkel von 111°
Schlürfen im winkel von 90°
höhe
Pet f
lasc
he b
is zu
m fl
asch
enha
ls 1
9.2c
m
Höhe
pet F
lasc
he 2
2.5c
m
flas
chen
hals
3.3
cm
höhe
Pet f
lasc
he b
is zu
m fl
asch
enha
ls 1
9.2c
m
Höhe
pet F
lasc
he 2
2.5c
m
flas
chen
hals
3.3
cm
vert
ikal
er a
ufdr
ehw
eg 0
.8cm
breite pet Flasche 6.3cm
2.9 cm 1.7 cm1.7 cm
breite pet Flasche 6.3cm
2.9 cm 1.7 cm1.7 cm
breite pet Flasche 6.3cm
breite pet Flasche 6.3cm
breite pet Flasche 6.3cm
Detal FlaschenhalsMst: 2:1
z
x y
anzahl drehungen um flasche zu öffnen:1.5 x um eigene Achse =540°
anzahl drehungen um flasche zu öffnenWeg 1.5 x um eigene Achse = (540°) 0.1365mZeit 0.35sGeschwindigkeit m/s = 0.39
mathematischer momentaufdrehen einer 0.3dl Pet Flasche
gewicht pet flasche 0.3dl0.25gvolumen3dl = 300cm3
Eu Norm56800
Druck auf Flasche durch handp = f
n / a
P = 0.8 / 0.0735 = 11.03 n/m2
Maximaler druck in pet flaschezugelassen 0.7barrealsituation 0.82barnormalzustand 0.4bar
aufwand von 0.4bar zu 0.82barp
1/p
2 = t
1/t
2
0.7/0.85 = 0.8235294118barheisst (annäherung) 23.6mal kräftig schütteln
Mixing water and corn starch results in a newtonian fluid. A quick application of force - for example walking over it quickly - results in the mixture reacting more firmly. A slower and more steady application of force - for example standing on it - result in a higher viscosity of the mixture. A small basin of the mixture was placed at the entrance.
Luftschlossmaler, 2018Installation, wooden frame 126x126cm and maize starch with water, Fluidum - Kulturhaus Helferei, Zurichvideo documentation
Installation view, inside to outside - before the openingInstallation view, front entrance - Before the opening
Luftschlossmaler, 2018Installation, Holzrahmen 126x126cm und Maisstärke mit Wasser, Fluidum - Kulturhaus Helferei, Zürichvideo documentation
Luftschlossmaler, 2018Installation, Holzrahmen 126x126cm und Maisstärke mit Wasser, Fluidum - Kulturhaus Helferei, Zürichvideo documentation
Installation view, floor close to entrance, after openingInstallation view, after the opening
Duftwandstreicher, 2017Installation, spruce batten with cold-wet cotton cloth 3.66x9.9m , Bone Festival 19, Bernvideo documentation
Installation:Two steel cables are installed at +/- 5.00m in the main room of the Schlachthaustheater in between the two smaller walls (main entrance and emergency exit by the fountain in the back). A roll carabiner is attached to both steel cables. The carabiners carry a woo-den slat (10m). Bevor the audience enters the room a cold, wet, black cotton fabric is hung from the slats. The fabric spans the entire width (10m) and height (5m) of the room. The fabric is then pulled over the audience with a cable pull to the main entrance. The installation remains placed by the main entrance.
Procedure:The audience returns to the theater from a guided performance. The audience is seated. In the moment in which the first people start wondering when the program will continue, the wet fabric is pulled over the audience in a slow and controlled manner. The wetness is surprising. The fabric ends at the other end of the room and the moderation of the work begins. The entire installation lasted for eight minutes.
Duftwandstreicher, 2017Installation, spruce batten with cold-wet cotton cloth 3.66x9.9m , Bone Festival 19, Bernvideo documentation
Filmstills from documentation
Sturzteilnahme, 2016Installation, facing formwork made of Pavatexplatte (8.3m x 4.12m) on spruce slat, Stadtgalerie Bernvideo documentation
The audience is asked into the room and is seated. A lead-in moderation is performed. Nothing happens for six minutes, then the wall falls. It falls in viewing direction of the audience. The wall stops 1.2m over the heads of the front row.
Exhibition text:I: The terrible children, who dissociate from their fathers or as bastards bragging with bold achievements, the descendants, who lost all respect and therefore recklessly only pursue their own, the usurpers and regicides, to whom nothing is holy anymore, they are the…S: Dance amongst you and you.I: Nt = N0 x eat of the installation paired with the atmosphere of the rest of the evening.R: Caution.
Sturzteilnahme, 2016Installation, facing formwork made of Pavatexplatte (8.3m x 4.12m) on spruce slat, Stadtgalerie Bernvideo documentation
Sturzteilnahme, 2016Installation, facing formwork made of Pavatexplatte (8.3m x 4.12m) on spruce slat, Stadtgalerie Bernvideo documentation
Gesinnungswandelhallen, 2017Installation, Spruce slat 3x1.8x160cm, Halles USEGO Sierrevideo documentation
A spruce slat was installed at the entrance to the location of a performance festival. People who wanted to see the performances had to move under the slat. The wooden slat was not firmly installed. The slat could have been demounted at any time. The lower edge of the slat was installed at 1.57m.
Gesinnungswandelhallen, 2017Installation, Spruce slat 3x1.8x160cm, Halles USEGO Sierrevideo documentation
Outside space with entrance situation Filmstills from documentation
Neigungsgang, 2017Installation, three-layer panels on 7mx2.5m steel frame and two steel pedestals, Zurich University of the Artsvideo documentation
A rocker (600x198cm) was fitted to the hallway (7th floor, Toni-Areal, Zurich) with a width of 200cm. The hallway, lacking windows and doors, is not inviting for lingering and there-fore demands a occupation with one’s self. The rocker can be accessed from both sides and can support up to 18 people. The highest point of he rocker is at approximately 180cm.
Neigungsgang, 2017Installation, three-layer panels on 7mx2.5m steel frame and two steel pedestals, Zurich University of the Artsvideo documentation
Filmstill
Neigungsgang, 2017Installation, three-layer panels on 7mx2.5m steel frame and two steel pedestals, Zurich University of the Artsvideo documentation
Filmstill