CV Muzzini
27
Claudio Muzzini 32 years experience on Hardware & System design for Avionic, Telecom and semiconductor industry. Spiacialised in High-speed Mixed Signal Design and Design, Audit, Checking, Inspection Mass production in China
Transcript of CV Muzzini
Claudio Muzzini
32 years experience on Hardware & System design
for Avionic, Telecom and semiconductor industry.
Spiacialised in High-speed Mixed Signal Design
and
Design, Audit, Checking, Inspection
Mass production in China
Skills & Abilities
Technical Skills Special skills Abilities
Technical Skills
Very good knowledge of high speed digital electronics
Very good knowledge of high performance analog circuit
Very good knowledge of high performance mixed-signal circuit
Very good knowledge of Avionics for both military and civil applications
Very good knowledge of residential gateway with VoIP
Very good knowleadge of how-to design for Code of Conduct on
Energy Consumption of Broadband Equipment
Technical Skills
Good knowledge of RADAR Good knowledge of RF Good knowledge of Software defined Radio Good knowledge of GPON, ETH, xDSL and Wireless Medium knowledge of FW/SW design Medium knowledge of HDL design Base knowledge of mechanics Very good knowleadge about Design for high volume
Special skills
Very good intuition for which problems to solve in hardware and which ones to solve in software
Constant knowledge of innovation Very good relationship management with silicon
manufacturer Multi-language and multi-cultural approach
Abilities
Identify and evaluate problems and develop improvements to production,packaging material by using I.E. techniques to reduce unit cost,improve quality and productivity.
Ability to “swap” technical area (hardware, software, mechanical, validation) quickly, understanding specific issues.
Availability for frequent and long-term trip in any part of world, especially in China.
Work experiences
Arcadia Italy Ltd.
ADB - Advanced Digital Broadcast
ELSAG DATAMAT now SELEX Es a Finmeccanica Company
PIRELLI Broadband Solutions – (PBS) – Acquired by ADB - Advanced Digital Broadcast
SECONDO MONA
INDUSTRIE DIAL FACE (IDF)
ST Microelectronics
ALCATEL Microelectronics - Acquired by ST Microelectronics
LOGIC Aermacchi Group
FIAR now Selex ES a Finmeccanica Company
CRSB - Audiology Institute, University of Milan
Arcadia Italy Ltd. 2012 to now
Responsible for China office ( based in Shenzhen - China)
I support locally the Italian customers to produce in China. With the following services
Design with ODM Factory Audit Initial Production Check Production Monitoring Pre-Shipment Inspection
ADB 2011 to 2012
Hardware Team Leader Set-Top-Box Division I am taking care of managing and overseeing all hardware
design phases, from specification to mass production of a new generetation Set-Top-Box for IPTV, Sattellite, and Terrestrial TV
Part of my role is the technical management of our ODMs in China.
ELSAG DATAMAT 2010 to 2011now Selex ES a Finmeccanica Company
Material Engineer My role, inside the material engineering department is to
help the R&D department to define the best ( in term of performance/price ratio) system architecture and components selection available in Europe and in China.
The goal of my activity is to share as much as possible, components, circuit and solution inside the telecom products’ families - in this way ELSAG DATAMAT decrease the time to market and it increase the number of components bought at lower price
PIRELLI PBS 2008 to 2010
Hardware team leader - Access Division I was taking care of managing and overseeing all hardware
design phases, from specification to mass production of residential access gateways for multiple play applications(voice, data, video, value-added services)based on fixed(xDSL, FTTx)
Part of my role is the technical management of our ODMs in China.
SECONDO MONA 2007 to 2008
Design a new generation of Fuel probe for aircrafts and helicopters.
INDUSTRIE DIAL FACE (IDF) 2005 to 2007
Hardware team leader – OLT program System and hardware design of OLT 8x2.5Gbps GPON /
2x10GbE redundant GPON board for the NGN2 (next Generation Network phase 2 ) of Telecom Italia operator.
ST Microelectronics 2002 to 2005
FAE – Field Application Engineer
Support ADSL products for South Europe Key customers.
AE - Application Engineer
Design the Evaluation board for STLC1664 Chip
FEC, EFEC and PM (G709, G975, G707), 4x2.5G Concentrator Design the Evaluation board for STLC4816 Chip
622Mb/s - 1.25Gb/s – 2.5Gb/S 8 CHANNELS MUX / DEMUX for BackPlane Applications 622MHz LVDS IO - 2.5GHz CML I/O
Design the feasibility board for PoE components family
Project Manager
Project Manager for CISCO DSLAM.
Project Manager for a CISCO Triple-Play Set-Top-Box.
ALCATEL Microelectronics 2001 to 2002aquired by ST Microelectronics on 2002
Field Application Engineer Technical support for customers in the Mediterranean
Region for ADSL products.
AVNET EMG 1995 to 2000
Field Application Engineer FAE for DSP product – TI, HARRIS, ADI, PLESSEY
It was under my responsability support the Italian customer for DSP application
FAE for RF products - HARRIS, MOTOROLA, PHILIPS, HP, NSC
I helped the Italian customers to use the RF components sold from AVNET
LOGIC 1989 to 1995 & 2000 to 2001part of Aermacchi group
Project leader System integrator for the Italian version of Store
Management System of E.H.101 Helicopter. Store Interface Unit for Store Management System Project
leader / Program Manager Project leader for an anti-icing system for Advanced Turbo
Propeller (ATP) of British Aerospace.
LOGIC 1989 to 1995 & 2000 to 2001part of Aermacchi group
Project leader Project leader for a CH-47 Engine Control System. Project leader for a CH-46 Engine Control System. Responsible for EMC laboratory. Program and project leader for a “Generator Control Unit”
for Aermacchi M-346 aircraft. Program and project leader for “Get Home Display” graphic
generator for Aermacchi M-346 aircraft.
FIAR 1987 to 1989now Selex ES a Finmeccanica Company
Senior Designer Design the synchro interface for data processor of a sonar
system FIAR SQQ-14/IT I have designed the R.F. part, tha A/D conversion and the
Digital Demodulator for an avionic radar.
CRSB - Audiology InstituteUniversity of Milan 1983 to 1987
Researcher Hardware/software design for various equipment used for
analysis and measurement of electro-acoustic and phonetic parameters.
The four years spent in the research center as a researcher in the fields of computer science and of the electro-acoustic allowed me to learn very well the “scientific method” and the Digital Signal Processing algorithms and technologies. Worth mentioning, among the various projects.
I was involved in, are the first studies and cochlear implants and the development of an innovative magnetic induction acoustic prosthesis.
Various 1979 to1983
During the school, for passion, I worked as a sound engineer in some recording studio and as a technical writer on professional audio newspapers "millecanali" and "show meeting"
Standard committee
I represent AEIT ( Italian Federation for Electrotechnics, Electronics, Automation, Informatics and Telecommunications) in the following Italian standard committees ( CEI ).
CEI/IEC - CT 86 – Fibre ottiche - Optical fibers
CEI/IEC - SC 100D – Sistemi di distribuzione via cavo - Cabled Distribution Systems
CEI/IEC - CT 113 – Nanotecnologie per sistemi e prodotti elettrici ed elettronici - Nanotechnology standardization for electrical and electronic products and systems
CEI/IEC - CT 205 – Sistemi bus per edifici - Home and Building Electronic Systems
CEI/IEC - CT 305 – Apparati e sistemi terminali di telecomunicazioni - Audio, video and multimedia systems and equipment
CEI/IEC - SC 309/47 – Dispositivi a semiconduttore e microcircuiti integrati - Discrete semiconductor devices
GDL "Digital Home" – Gruppo di lavoro su “Digital Home” - Digital Home working Group
GDL Sistemi integrati di automazione degli impianti tecnici: analisi impatto sulle performance
energetiche degli Edifici - Energy performance of buildings - Impact of Building Automation
Teaching
Bernocchi Institute in Legnano
school year 1987-1988 Teacher for Electronic course
European Community course
School year 1997-1998 Teacher for Digital Electronic
European Community course
School year 1998-1999 Teacher for Computer Science
Publication
Protesi ad induzione elettromagnetica: primi approcci. – Muzzini, Zaghis – Universita’ degli studi di Milano – 1985
Electromagnetic induction and hearing aid: a preliminary report.
Associations
IEEE - Institute of Electrical and Electronics Engineers.
AEIT - Federazione Italiana di Elettrotecnica, Elettronica, Automazione, Informatica e Telecomunicazioni
AEICT
INTERESTS & HOBBIES
Study and Construction RADAR – Ham RADAR Travel arround Europe with caravan car Book reading
Some of the my book with ISBN are catalogate here http://www.anobii.com/01ab9f8e716f75d1af/books http://www.librarything.it/catalog/cmuzzini
Retrocomputing
Personal data
Claudio Muzzini Born in Milano 30 December 1963 Address: Viale Ungheria, 16 - 20138 Milano - Italy Phone numbers:
Italian Mob. +39 348 4321716 China Mob. +86 18565824436
e-mail: [email protected] web site: http://www.muzzini.org Linkedin: http://it.linkedin.com/pub/claudio-muzzini/0/942/61b
