Cutting Tools - CFIS Group Tools Drill Sets & Empty Index New CFIS Cryogenically Treated Drills Part...

Cutting ToolsColumbus Fleet Industrial Supply

Canton Fleet Industrial Supply

Canton First Aid & Safety

www.cfisgroup.com Phone: 614-332-7464 Fax: 330-809-63781

Cutting Tools

Drill Sets & Empty Index

Part # TYPE

330-028330-040330-039330-030330-032330-045330-070

15 PC Set (32nd)29 PC Set Flip-Out (64th)29 PC Set Orange Round

1-60 SetA-Z Set

29 PC Reduced Shank29 PC Colbalt Set

Part # TYPE

330-001330-002330-003330-005330-007

Drill Guage15 PC Empty (32nd)29 PC Empty (64th)

1-60 EmptyA-Z Empty

Empty Index

Full Sets


Part # TYPE

330-050 S&D Drill SetPart # TYPE

330-015 S&D Drill Empty

Empty IndexFull Sets

9/16, 13/16, 5/8, 7/8, 11/16, 15/16, 3/4, 1”


Part # TYPE

330-042 56 Piece Drill Set

Part # TYPE

330-025 56 Piece Drill Empty


3 ea 1/16” – 1/4”2 ea 17/64” – 3/8”1 ea 11/16” – 1/2”


Cutting ToolsDrill Sets & Empty Index

New CFIS Cryogenically Treated Drills

Part # TYPE

330-043 115 pc Drill Set

Part # TYPE

330-020 115 pc Drill Empty


CFIS 190-CN

CN-TECH™ 135˚ Split Point• Cryogenic treatment creates a more uniform “grain” structure by transforming retained austenite into martensite.• Modifies the carbon micro-structure through precipitation of carbides increasing resistance to wear.• Nitride process diffuses nitrogen into the surface to create a case hardening resulting in superior tool life and exceptional corrosion resistance.

Cryogenic Nitride HSS Products

CFIS Cryogenic Drills


Cutting Tools


Ultra-Cut Gold Stick

•High performance cutting tool lubricant in an easy to apply, easy to carry solid stick applicator.•Easy to use - just apply directly to the cutting tool.•High performance - provides superior lubricity for fast results, even on tough alloys.•No mess - no fluid leaks and cleans up easily.•Cool running - to provide extra cutting tool life.•Superior finish & tool life when applied sparingly to grinding wheels.•No Hazardous Ingredients.•Completely Biodegradable.•Non-Toxic.•Clean and Safe.

Part # QTY

252-000 Ea

Part # QTY

252-010 Ea

Accu-Lube Gold

Stick

Accu-Lube Gold

Spray

Lube-Cut Tapping

Fluid

Part # QTY

252-050 Ea

Cutting / Tapping

Lubricants

Cutting Tools

WHY CHOOSE

CFIS MAGNA-CUT-PLUS?

Substantially longer cutting life

The nitro-carburized flute has an increased Rockwell hardness.Cuts harder materials

The flatter point takes a smaller chip. More torque is directed to a smaller area. This allows drilling into materials with hardness of over 30 on the Rockwell “C” scale.Stops drill walking

The split point design gives

accurate starting without the

use

of a center punch.Holds tighter hole size

The split point design is self centering. This limits the normal oversize drilling characteristics.Outstanding quality appearance

The rich amber gold color sets it apart from commodity cutting tools.Runs cooler, uses less torque

135° point takes a smaller chip resulting in less heat. Friction is reduced by amber gold surface treatment.Stops chuck slippage

Flats on drill shanks allow easy positive chuck grip.

Magna-Cut-Plus Super Premium 3 Flats on ShankSpecial Hi-Molybdenum tool steel.

135° split point for fast penetration and accurate starting without center punch. Precision ground point, flutes, body, clearance and drill diameter for the ultimate in accuracy and performance.

Magna-Cut-Plus Premium Drills Jobber length 135*

Part #DRILLDIAM.

DEC-IMAL

OVERALL

341-000341-001341-002341-003341-004341-005341-006341-007341-008341-009341-010341-011341-012341-013341-014341-015341-016341-017341-018341-019341-020341-021341-022341-023341-024341-025341-026341-027341-028

1/165/643/327/641/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

.0625

.0781

.0938

.1094

.1250

.1406

.1562

.1719

.1875

.2031

.2188

.2344

.2500

.2656

.2812

.2969

.3125

.3281

.3438

.3594

.3750

.3906

.4062

.4219

.4375

.4531

.4688

.4844

.5000

1-7/822-1/42-3/82-1/22-5/82-3/42-7/833-1/83-1/43-3/83-1/23-5/83-3/43-7/844-1/164-1/84-3/164-1/44-5/164-3/84-7/164-1/24-5/84-3/44-7/85

Part # SIZE QTY341-030 1/2” Drill - 3/8” SHANK 6”

LONGEA


Cutting Tools

Magna-Cut-Plus Super Premium

3 Flats on Shank

Special Hi-Molybdenum tool steel.

135° split point for fast penetration and accurate starting without center punch.

Precision ground point, flutes, body, clearance and drill diameter for the ultimate in accuracy and performance.

Magna-Cut-Plus Wire Drills Jobber Length 135*

Part # SIZEFLUTE

LENGTHLGTH

341-131341-132341-133341-134341-135341-136341-137341-138341-139341-140341-141341-142341-143341-144341-145341-146341-147341-148341-149341-150341-151341-152341-153341-154341-155341-156341-157341-158341-159341-160

313233343536373839404142434445464748495051525354555657585960

1-5/81-5/81-1/21-1/21-1/21-7/161-7/161-7/161-3/81-3/81-3/81-1/41-1/41-1/81-1/81-1/8

11111

7/87/87/87/83/43/4

11/1611/1611/16

2-3/42-3/42-5/82-5/82-5/82-1/22-1/22-1/22-3/82-3/82-3/82-1/42-1/42-1/42-1/42-1/4222221-7/81-7/81-7/81-7/81-3/41-3/41-5/81-5/81-5/8

Part # SIZEFLUTE

LENGTHLGTH

341-101341-102341-103341-104341-105341-106341-107341-108341-109341-110341-111341-112341-113341-114341-115341-116341-117341-118341-119341-120341-121341-122341-123341-124341-125341-126341-127341-128341-129341-130

123456789101112131415161718192021222324252627282930

2-5/82-5/82-1/22-1/22-1/22-1/22-7/162-7/162-7/162-7/162-5/162-5/162-5/162-3/162-3/162-3/162-3/162-1/82-1/82-1/82-1/8

222

1-7/81-7/81-7/81-3/41-3/41-5/8

3-7/83-7/83-7/83-7/83-7/83-7/83-7/83-7/83-7/83-7/83-7/83-7/83-7/83-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/2


Cutting ToolsMagna-Cut-Plus Wire Drills Jobber Length 135*

Part # SIZEFLUTELENGT

H

OVERALL

LENGTH341-300341-301341-302341-303341-304341-305341-306341-307341-308341-309341-310341-311341-312341-313341-314341-315341-316341-317341-318341-319341-320341-321341-322341-323341-324341-325

ABCDEFGHIJKLMNOPQRSTUVWXYZ

2-5/82-3/42-3/42-3/42-3/42-7/82-7/82-7/82-7/82-7/8

2-15/162-15/163-1/163-1/163-1/163-5/163-7/163-7/163-1/23-1/23-5/83-5/83-3/43-3/43-7/83-7/8

3-7/844444-1/84-1/84-1/84-1/84-1/84-1/44-1/44-3/84-3/84-3/84-5/84-3/44-3/44-7/84-7/8555-1/85-1/85-1/45-1/4

This 135* point, high speed steel drill performs well in a wide variety of ferrous

metal drilling application.The black surface treatment prevents chip welding and increases abrasion resistance.

Part #DRILLDIAM.

OVERALL

LENGTH

FLUTELENGT

H341-910341-914341-918341-922341-926341-930

3/161/4

5/163/8

7/161/2

12”12”12”12”12”12”

2-1/42-1/23-1/83-3/44”4-1/2

Aircraft Ext Drills

Part #DRILLDIAM.

OVERALL

LENGTH

LENGTHOF

TWIST342-130342-140342-150342-160

1/85/323/161/4

1-7/82-1/162-3/162-1/2

7/811-1/81-3/8

Stubby Twin End Drills

•Super heavy duty 135° split point eliminates center punching. •Excellent for use on sheet metal.•Expanded web provides superior strength and extended tool life.•Premium alloy provides exceptional wear resistance and longer life.•Finish: Surface - Ferro Gold, Flute - Ferro Gold.•Made in the U.S.A.

•EXTENDED FLUTE DESIGN - Provide maximum efficiency for quick drilling of 12" deep holes. •SELF-CENTERING SPLIT POINT - 135°split point provides a fast initial bite, and eliminates walking and wandering for precise hole positioning.•SUPERIOR CONSTRUCTION - Premium alloy with ferro-gold surface treatment provides reduced friction and long tool life.•VERSATILE - Excellent for drilling in hard to reach places, deep hole drilling and more.•MADE IN THE U.S.A.


Cutting Tools

Special Hi-Molybdenum tool steel. 135° split point for fast penetration and accurate starting without center punch. Precision ground point, flute, body, clearance, and drill diameter for the ultimate in accuracy and performance. Body and clearance are gold surface treated for maximum lubricity. Space age nitro-carburized steel withstands substantially higher drilling temperatures while maintaining sharpness. Recommended for use in work hardening grades of stainless steel and other hard metal.

S & D Magna-Cut-Plus DrillsSilver & Deming 135*

Part #DRILLDIAM.

shank OVERALL

342-224342-226342-228342-230342-232342-233342-234342-235342-236342-238342-240342-242342-243342-244342-245342-246342-248342-250342-252342-253342-254342-255342-256342-258342-259342-260342-262342-264342-265342-266342-267342-269342-272342-275342-277342-280342-286

33/6417/3235/649/1637/6419/3239/645/841/6421/3243/6411/1645/6423/3247/643/449/6425/3251/6413/1653/6427/3255/647/857/6429/3259/6415/1661/6431/3263/641”1-1/161-1/81-5/321-3/161-1/4

1/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/2

6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”6”

Part #DRILLDIAM.

DECIM

OVERALL

344-000344-001344-002344-003344-004344-005344-006344-007344-008344-009344-010344-011344-012344-013344-014344-015344-016344-017344-018344-019344-020344-021344-022344-023344-024344-025344-026344-027344-028

1/165/643/327/641/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

.0625

.0781

.0938

.1094

.1250

.1406

.1562

.1719

.1875

.2031

.2188

.2344

.2500

.2656

.2812

.2969

.3125

.3281

.3438

.3594

.3750

.3906

.4062

.4219

.4375

.4531

.4688

.4844

.5000

1-7/822-1/42-5/82-3/42-7/83-1/83-1/43-1/23-5/83-3/43-7/844-1/84-1/44-3/84-1/24-5/84-3/44-7/855-1/85-1/45-3/85-1/25-5/85-3/45-7/86

Superior Cobalt High Speed Steel - DIN 338

Gold surface treated for maximum lubricity. Heavy duty construction, 135°split point, no center punch needed - will not walk. Gyrodial Torsion flute and land construction yields exceptional performance in deep hole drilling applications. Recommended for a wide range of steels, castings and other hard metal drilling applications.

Magna-Cut-Plus Colbalt DrillsMechanic’s length 135*


Cutting Tools

Part # SIZESHANK

SIZEOVERALLLENGTH

345-012345-014345-018345-024345-030345-034345-036

7/161/25/83/47/81”1-1/16

7/161/21/21/21/21/21/2

5-3/85-7/86-1/27777

DRILLS TRUCK FRAMES IN MINUTES INSTEAD OF HOURS

•Reduces time, drill breakage, extreme pressure required on large diameter drills.•Reamers start using a small pilot hole.

Premium Rapid Reamer

Part # SIZE QTY

345-050 8 PC SET Ea

Hole Hog Set

Part # SIZE QTY

345-060345-064345-066345-068345-070345-072

3/81/2

9/165/8

11/163/4

EaEaEaEaEaEa

Hole Hog Reamer

4-Flute Core Drill - Super Premium 1/2" Shank - 3 Flats on Shank Special Hi-

Molybdenum tool steel, gold surface treated body and clearance for maximum lubricity. Close tolerance construction Exclusively

designed for enlarging existing holes. These core drills may replace tapered reamers in

many applications

Carbide Tipped Drills

Solid Carbide Straight FluteExcellent for removing broken screw extractors, taps anddrill bits. For use in extremely hard and difficult to machine materials.

Hard Steel Drills Carbide tipped, straight fluteThese drills are made for use in drilling hardened steel inthe range of 48 to 65 Rockwell C.

Part # SIZEOVERALLLENGTH QTY

344-224344-226344-228344-229344-230344-232344-236344-240344-244344-248

1/85/323/167/329/321/45/163/87/161/2

1-7/82-1/162-3/162-3/8

2-11/162-13/16

33-1/8

3-7/163-3/4

EaEaEaEaEaEaEaEaEaEa

Part # SIZEOVERALLLENGTH QTY

344-260344-264344-265344-266344-267344-270344-276344-282344-284344-286

1/83/165/327/329/321/45/163/87/161/2

2-3/43”3”4”4”6”6”6”6”6”

EaEaEaEaEaEaEaEaEaEa

Solid Carbide Drills


Cutting Tools

STEP DRILLS

ULTRA BIT™

MULTI-DIAMETER

Type 78-AG Gold Oxide, 3-flats on Shank

SPECIAL AXIAL and RADIAL FLUTE DESIGN - Increases work piece penetration.

DUAL FLUTE CONSTRUCTION – Drills clean accurate holes in thin materials, quickly and easily.

MULTI-DIAMETER DRILLS - One drill can produce up to 13 different hole sizes.

DOUBLE FLUTED DESIGN - Drills clean, accurate, burr-free holes in thin materials quickly and easily.

HIGH MOLY ALLOY STEEL - Special high speed alloy construction provides superior wear resistance for extended tool life.

GOLD SURFACE TREATMENT - Provides superior surface lubricity for fast and smooth cutting action.

3 FLATS ON SHANKS - Flatted shanks eliminate chuck slippage.

VERSATILE - Can be used on portable drills, drill presses and lathes.

MULTI-MATERIAL - Stainless steel, steel, aluminum, brass, other metals, rigid plastics, laminates and most material with a thickness equal to or less than the step depth of the drill.MADE IN THE U.S.A.

Part# Range Qty.

345-110345-115345-120345-125

1/8 – 1/23/16 – 1/21/4 – 3/49/16 – 1”

EAEAEAEA

Part# Range Qty

345-110345-120345-125

1/8–1/2, 3/16–1/2, 1/4–3/41/8–1/2, 3/16–1/2, 3/16–3/81/8–1/2, 3/16–1/2, 9/16–1”

EAEAEA

3 – Piece Set


Cutting Tools

Part #DRILLDIAM.

OVERALLLENGTH

SHANKDIAMETER

346-210346-215346-220346-225346-230346-235346-240346-245346-280

1/83/161/45/163/81/25/83/41

3”3-1/2”

4”4”4”6”6”6”6”

1/83/161/41/41/43/83/81/21/2

Carbide Masonry Drills

Drill Press Part # RANGE QTY

346-520346-525346-524

1/4 X 1”1/4 X 2

1/4 X 2 (7/16)

EaEaEa

Knock-Out Pin

Part # QTY

346-505 Ea

Spiral-Broach Drill Press

•Fastest, easiest way to drill holes in tile, brick, cement, concrete, etc.•Carbide tips ensure that drill stays sharper longer.•Wide spiral flute assures dust removal from cutting zone.•Use for installing expansion anchors, plumbing, heating, air conditioning, etc.•Suitable for hammer drills.•Made in the U.S.A.

Part # RANGE QTY

346-530346-535345-540346-545346-550346-555346-560346-565346-570346-575346-580

1/2 X 1”9/16 X 1”5/8 X 1”

11/16 X 1”3/4 X 1”

13/16 X 1”7/8 X 1”

15/16 X 1”1” X 1”

1-1/16 X 11-1/8 X 1

EaEaEaEaEaEaEaEaEaEaEa

1” Long

Spiral-Broach Drills

Part # RANGE QTY

346-720346-725345-730346-735346-740346-745346-750346-755346-760346-765346-770346-775346-780346-785346-790346-795346-800346-820

1/2 X 2”9/16 X 2”5/8 X 2”

11/16 X 2”3/4 X 2”

13/16 X 2”7/8 X 2”

15/16 X 2”1” X 2”

1-1/16 X 2”1-1/8 X 2”

1-3/16 X 2”1-1/4 X 2”

1-5/16 X 2”1-3/8 X 2”

1-7/16 X 2”1-1/2 X 2”

2-1/16 X 2”

EaEaEaEaEaEaEaEaEaEaEaEaEaEaEaEaEaEa

2” Long


Cutting ToolsPART NO. 347-030

25 Piece Magnum Super Premium SetSpiral Point Plug Taps & Hex Dies

Set contains: Type 20-AG and 27-AG• HSS spiral point taps & HSS hex dies sizes: 1/4-20, 1/4-28,5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13 &1/2-20.• HSS pipe tap and hex die size: 1/8-27 NPT.• T-Handle tap wrench: 3/16"-1/2".• Die stock & Screw pitch gauge.Supplied in sturdy plastic case.

PART NO. 347-040

23 Piece Magnum Super Premium Set -Metric Spiral Point Taps & Hex Dies

Set contains: Type 21-AG and 27-AG• HSS spiral point taps & HSS hex dies sizes: 3.0-.50, 3.5-.60,4.0-.70, 5.0-.80 6.0-1.00, 8.0-1.25, 10.0-1.50 & 12.0-1.75.• HSS pipe tap and hex die size: 1/8-27 NPT.• T-Handle tap wrenches: 0 - 1/4" & 3/16"-1/2".• Straight handle tap wrench: #4 - 1/2".• Die stock & Screw metric pitch gauge.Supplied in sturdy plastic case.

PART NO. 347-060.

58 Piece Magnum Super Premium SetStraight Flute Plug Taps & Hex Dies

Set contains: Type 24-AG and 27-AG• HSS straight flute taps & HSS hex dies sizes: 6-32, 8-32, 10-24,10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24,7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12, 9/16-18, 5/8-11,5/8-18, 3/4-10, 3/4-16, 1/8-27NPT & 1/4-18NPT.• Straight handle tap wrenches: #4-1/2" & 1/4"-3/4".• Die stocks: MED R/H & 1"R/H.• T-handle tap wrench: 0-1/4".• Screw pitch gauge.• Screw driver & Spiral flute extractors sizes: Ex 1 thru Ex 5


Cutting ToolsPART NO. 347-080

40 Piece Magnum Super Premium SetSpiral Point Plug Taps & Hex Dies

Set contains: Type 20-AG and 27-AG• HSS spiral point taps & HSS hex dies sizes: 4-40, 6-32, 8-32,10-24, 10-32, 12-24,1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16,3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20.• HSS pipe tap and hex die size: 1/8-27 NPT.• T-Handle tap wrenches: 0 - 1/4" & 3/16"-1/2".• Straight handle tap wrench: #4 - 1/2".• Die stock, Screw pitch gauge & Screw driver.Supplied in sturdy red plastic case.

PART NO. 347-070

40 Piece Magnum Super Premium SetStraight Flute Plug Taps & Hex Dies

Set contains: Type 24-AG and 27-AG• HSS straight flute taps & HSS hex dies sizes: 4-40, 6-32, 8-32,10-24, 10-32, 12-24, 1/4-20,1/4-28, 5/16-18, 5/16-24, 3/8-16,3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20.• HSS pipe tap and hex die size: 1/8-27 NPT.• T-Handle tap wrenches: 0 - 1/4" & 3/16"-1/2".• Straight handle tap wrench: #4 - 1/2".• Die stock, Screw pitch gauge & Screw driver.Supplied in sturdy red plastic case.


PART N0. 347075

37 Piece Magnum Super Premium Set Metric Set

Spiral Point Plug Taps & Hex DiesTaps 1 Of Each3mm X 0.50,3mmx 0.60, 4mm X 0.70, 4mm X 0.75, 5mmx 0.80, 5mm X 0.90, 6mm X 1.00, 7mm X 1.00, 8mmx 1.25, 9mm X 1.00, 9mm X 1.25, 10mmx 1.25, 10mmx 1.50, 11mmx 1.50, 12mmx 1.50, 12mmx 1.75, 1/8-27 NPT PipeT-Handle Tap Wrench 1 Of Each0 To 1/4, 3/16 To 1/2Die StockHex Dies3mmx 0.50, 3mmx 0.60, 4mm X 0.70, 4mm X 0.75, 5mm X 0.80, 5mmx 0.90, 6mm X 1.00, 7mm X 1.00, 9mm X 1.00, 9mm X 1.25, 10mmx 1.25, 10mmx 1.50, 11mmx 1.50, 12mmx 1.50, 12mmx 1.75,1/8-27 NPT

Cutting ToolsT-Type Tap Wrench

Part #FITS

STANDARD

TAPS

FITS MACHINESCREW

TAPS347-202347-204

1/16 TO 1/47/32 TO 1/2

#0 TO 14312 to 14

Part # SIZE347-347347-348347-349

1/4-20 T1/4-20 P1/4-20 B

347-350347-351347-352

5/16-18 T5/16 18-P5/16-18 B

347-353347-354347-355

3/8-16 T3/8-16 P3/8-16 B

347-356347-357347-358

7/16-14 T7/16-14 P7/16-14 B

347-359347-360347-361

1/2-13 T1/2-13 P1/2-13 B

347-362347-363347-364

9/16-12 T9/16-12 P9/16-12 B

347-365347-366347-367

5/8-11 T5/8-11 P5/8-11 B

347-368347-369347-370

3/4-10 T3/4-10 P3/4-10 B

347-371347-374

7/8-9 T1-8 T

Part # SIZE347-313347-314347-315

6-40 T6-40 T6-40 P

347-319347-320347-321

8-36 T8-36 T8-36 P

347-324347-325347-326

12-28 T12-28 P12-28 B

347-330347-331347-332

6-32 T6-32 P6-32 B

Part # SIZE347-333347-334347-335

8-32 T8-32 P8-32 B

347-336347-338347-339

10-24 T10-24 P10-24 B

347-340347-341347-342

10-32 T10-32 P10-32 B

347-343347-344347-345

12-24 T12-24 P12-24 B

Magna-Tap-Plus Hand Taps



Cutting Tools

Part # SIZE347-447347-448347-449

1/4-28 T1/4-28 P1/4-28 B

347-450347-451347-452

5/16-24 T5/16-24 P5/16-24 B

347-453347-454347-455

3/8-24 T3/8 24 P3/8-24 B

347-456347-457347-458

7/16-20 T7/16-20 P7/16-20 B

347-459347-460347-461

1/2-20 T1/2-20 P1/2-20 B

347-462347-463347-464

9/16-18 T9/16-18 P9/16-18 B

347-465347-466347-467

5/8-18 T5/8-18 P5/8-18 B

347-468347-469347-470

3/4-16 T3/4-16 P3/4-16 B

Magna-Tap-Plus 3 Piece Hand Tap Sets

Part # SIZE347-526347-528347-530

10-2410-3212-24

Part # SIZE347-532347-534347-536347-538347-540347-542347-544347-546

1/4-205/16-183/8-16

7/16-141/2-13

9/16-125/8-113/4-10

Part # SIZE347-632347-634347-636347-638347-640347-642347-644347-646

1/4-285/16-243/8-24

7/16-201/2-20

9/16-185/8-183/4-16

INCLUDES1 TAPER1 PLUG1 BOTTOM



Cutting Tools

Part # SIZE347-720347-722347-724347-726347-728347-730

1/81/43/81/23/41

Magna-Tap-Plus Hand Pipe Taps

Magna-Tap-Plus Metric Hand Taps - Plug

Part # SIZE347-754347-756347-758347-760347-762347-764347-766347-770347-774347-776347-778347-780347-820347-824347-828347-832

4 - .75 - .8

6 – 1.07 – 1.008 – 1.258 – 1.00

10 – 1.2510 – 1.5012 – 1.7512 – 1.2514 – 2.0014 – 1.5022 – 1.5022 – 2.5024 – 2.0024 – 3.00


Cutting Tools

Magna-Cut-Plus Hex Dies

Part # SIZE

WIDTHACROSS

FLAT QTY348-803348-804347-805348-806348-820348-822348-824348-826348-828348-830348-832348-834348-836

6-328-32

10-2410-321/4-205/16-183/8-167/16-141/2-139/16-12

11/16 - 115/8-113/4-10

1”1”1”1”1”1”1”1”1"

1-7/16”1-7/16”1-7/16”1-7/16”

EaEaEaEaEaEaEaEaEaEaEaEaEa

Part # SIZE

WIDTHACROSS

FLAT QTY348-860348-862348-864348-866348-868348-870348-872348-874348-876

1/4-285/16-243/8-247/16-201/2-209/16-1811/16 -

165/8-183/4-16

1”1”1”1”1”

1-7/16”1-7/16”1-7/16”1-7/16”

EaEaEaEaEaEaEaEaEa

Hex Die Holder

Part #FITS STANDARD

TAPSFITS MACHINESCREW TAPS QTY

347-800347-801

6-32 TO 1/29/16 TO 3/4

UP TO 1”UP TO 1-1/2

EaEa

Magna-Cut-Plus Hex Dies

Screw and Pipe Extractor

Part # #TO

REMOVE L.DRILLSIZE

353-001353-002353-003353-004353-005353-007

123457

3/32 TO 5/325/32 TO 7/327/32 TO 9/32

9/32 TO 3/8 (1/8 pipe)3/8 TO 5/8 (1/4 pipe)5/8 TO 7/8 (3/8 pipe)

22-1/2333-3/83-3/4

3/321/83/161/417/6413/32

Magna-Cut-Plus Left Hand Drills

Part #DRILLDIAM.

DECIMAL

353-600353-601353-602353-603353-604353-005353-606353-007353-608353-609353-610353-611353-612353-613353-614353-615353-616353-617353-618353-619353-620353-621353-622353-623353-624353-625353-626353-627353-628

1/165/643/327/641/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

.0625

.0781

.0938

.1094

.1250

.1406

.1562

.1719

.1875

.2031

.2188

.2344

.2500

.2656

.2812

.2969

.3125

.3281

.3438

.3594

.3750

.3906

.4062

.4219

.4375

.4531

.4688

.4844

.5000


Cutting Tools10 pc.

Screw & Pipe ExtractorsWith Left-hand drills

18 pc. CFIS Magna-Cut PlusTap & Drill Set

Part# Desc. Qty

353-000 10-Piece Set EA

Fast and easy stud removal

Left-hand spiral drills often eliminate the need for use of extractor.

Drill loosens bolt stud with counter clockwise rotation.

135˚ split point for fast penetration and accurate starting without center punch.

Most broken studs are work hardened during the breaking process.

•A NECESSITY FOR ANYONE THAT USES TAPS - Contains tap and matching drill size needed for use with taps.

•AVOIDS COSTLY DOWNTIME - A drill that is even 3/1000ths too small can result in broken taps. A drill bit that is oversize can result in weak threads that are prone to failure.

• Both can result in costly equipment downtime. Selecting the correct drill bit will create stronger threads and avoid breaking the tap in use.

Part# Desc. Qty

347-120347-122

USS StandardsMetric Sizes

EaEa


Cutting Tools

Part# Range Qty.

354-250354-251354-252354-253354-254354-255

5-Piece SetNo 1No 2No 3No 5No 5

EAEAEAEAEAEA

Removes broken studs, bolts and screws without damaging surrounding threads.

Double-edged tapered flute design cuts deep grooves for a secure grip in broken fasteners.

Non-slipping dual edge construction allows extractors to securely "bite in" and remove both left and right hand fasteners.

Dual-edge extractors grab with either clockwise or counterclockwise rotation.

Hex shank allows used with socket wrenches and extensions, box wrenches, and open end wrenches.

Center-punch pin in the center point of the extractor increases drilling accuracy.

Manufactured from chrome vanadium alloy steel, heat treated and tempered for maximum durability.


Cutting Tools

Remove broken taps and save the threads! Walton Tap Extractors let you remove

broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts.The hardened steel fingers of Walton Tap

Extractors fit in the flutes of a broken tap to back it out simply and safely. This effective

method has been used since 1908. They are available in every tap size, both inch and metric, as handy sets or individual pieces. Our Tap Extractors will fit both NC and NF

Part # QTY354-500 Ea

3-Flute Tap Extractor Set


4-Flute Tap Extractor Set

Broke Tap Extractor Set

You are assured that expensive machinery will not be damaged by makeshift methods of removing broken pipes and studs. Extractors work by pulling, rather than reaming, and are

designed for strength, durability and easy handling.

Extractors will save time, money and equipment in machine shops, manufacturing

plants, industrial plants, rail and bus lines and countless other places where machine

and equipment maintenance plays a key role in day-to-day operations.

Pipe and Stud Extractors do the job quickly and easily, an important factor when time is critical. These extractors will save you time

and money

(Set shown is 10 pc set)

Heavy Duty Pipe and Stud Extractor


5-Piece Set


Cutting Tools

Part # ITEM QTY355-025355-027355-029

1/4 X 5/83/8 X 3/41/2 X 1

EaEaEa

Part # ITEM QTY355-050355-052355-054

1/4 X 3/83/8 X 5/81/2 X 7/8

EaEaEa

Part # ITEM QTY355-070355-072355-074

1/4 X 5/83/8 X 3/41/2 X 1

EaEaEa

Part # ITEM QTY355-084355-085355-087355-089

3/16 X 7/321/4 X 7/323/8 X 5/161/2 X 7/16

EaEaEaEa

Part # ITEM QTY355-120355-125355-130355-135

1/4 X 5/83/8 X 3/41/2 X 15/8 X 1

EaEaEaEa

Part # ITEM QTY355-150355-155355-160

1/4 X 3/83/8 X 5/81/2 X 7/8

EaEaEa

Part # ITEM QTY355-180355-185355-190355-195

1/4 X 5/83/8 X 3/41/2 X 15/8 X 1

EaEaEaEa

Double Cut The most popular burr for ferrous applications.The flutes are ground in both the left and right hand directions, offering better operator control and rapid stock removal in harder materials.The double cut geometry reduces the size of the chips and can be used at slower than normal speeds.

Aluma Cut Designed for used on aluminum, non-ferrous metals, soft steel, reinforced plastics and other soft materials.The burrs are designed with a high flute finish for easy chip flow and fast stock removal and excellent work piece finish.

Premium Carbide Burrs Premium Carbide Burrs


Cutting ToolsAir Saw Blades

Part # TEETH

LENGTH

QTY RECOMENDED USES

356-490 24 3" 10 METAL CUT

356-494 32 3" 10 METAL CUT

Part # TEETH LENGTH QTY RECOMENDED USES

356-510 12 3" 10 METAL CUT

356-514 18 3” 10 METAL CUT

356-518 24 3" 10 METAL CUT

Features & Benefits: Fine teeth for cutting thin metal

Used mostly for auto body, muffler shops, or other metal fabricating shops

Applications Thin sheet metal, automotive, muffler shops, metal fabricating

• Features & Benefits: • For cutting ferrous and non-ferrous metals.• Milled and set teeth, better clearance while

cutting metal• Larger tooth (6, 8 tip) are more efficient

cutting in hard board, wood and other wood composites.

• Applications Machinable metal, wood, nail-embedded wood, composites, plastic, rubber

Bosch Blades

Saber Blades

Part # TEETH

LENGTH

QTY

RECOMENDED USES

356-524 24 3-1/8" 10 1/16" STEEL AND UNDER, THIN

WALL TUBING, FORMICA

356-528 14 3-1/8" 10 1/8" TO 1/4" STEEL,

NONFERROUS ALUMINMUM, FIBERGLASS,

PLASTIC

Part # TEETH

LENGTH

QTY

RECOMENDED USES

356-532 24 1-3/4" 10 THIN SHEET STEEL, THIN

WALL TUBING, AND SCROLL

WORK

356-536 18 3" 10 1/16" TO 1/8" STEEL, CONDUIT, PLASTIC, TUBING

ETC.

• Features & Benefits: • For cutting ferrous and non-ferrous metals.• Milled and set teeth, better clearance while

cutting metal• Larger tooth (6, 8 tip) are more efficient

cutting in hard board, wood and other wood composites.

• Applications Machinable metal, wood, nail-embedded wood, composites, plastic, rubber

Part # TEETH

LENGTH

QTY

RECOMENDED USES

356-550 24 3" 10 THIN SHEET METAL, SCROLL

CUTTING

356-554 14 3-5/8" 10 HEAVY GUAGE METAL,

FIBERGLASS, MASONITE,

SCROLL CUTTING


Cutting ToolsSaber Blades

Part # TEETH LENGTH QTY

RECOMENDED USES

356-562 18 6" 5 HEAVY GUAGE SHEET METAL, CONDUIT PIPE, TUBING, THIN FIBERGLASS

356-570356-572356-574

14/1018

14/10

8“9”12"

555

HEAVY GUAGE METAL,

COMPOSIT, MASONITE, WOOD ETC

356-576356-578

1814

12”6"

55

FOR METALT HEAVIER THAN

1/8", BAR STOCK, ANGLES, ETC, ALSO RUBBER,

MASONITE, FIBERGLASS,

ETC.


356-588 6 6" 5


356-592356-596

66

9"12"

55

• Features & Benefits Available in .035" thickness for flexibility in tight spaces and in .050" thickness for increased rigidity and heavier feed pressure.

• Straight and variable tooth pitch which provide speed in cut and easier feed in wood.

• Reinforced tooth design with compound relief provides high impact resistance.

• More aggressive cutting with positive rake on .050" x 6 TPI blades.

• Bi-metal construction for long cutting life and heat and wear resistant.

• Tapered blade body best for plunge cutting.

FOR WOOD AND NAIL EMBED WOODS, ALL COMPOSTION MATERIALS, NON-FERROUS METALS

GENERAL ROUGHING-IN WORK IN WOOD AND NAIL-EMBEDED WOODS. FAST CUTTING

Fire and Rescue Saber Blades

• Features & Benefits Available in .062" thickness provides minimum deflection for more stable cutting in wider cuts.

• Available in 7/8" blade for increased rigidity and heavier feed pressure.

• Straight tooth pitch provides quick and more efficient cutting in multiple wall applications.

• Optimized set pattern to reduce vibration, operator fatigue, and chance for blade binding in cut.

• Bi-metal construction for long cutting life and heat and wear resistant.

Applications Fire & rescue extrication, demolition


356-702356-710

1014

6" 55

356-704356-712

1014

9” 55

356-706356-714

1014

12” 22


Cutting Tools


Part # SIZE QTY356-755 12" X 24T Ea

Bi-Metal Hole Saw Maintenance Kit13 Pieces Includes: Hole Saws: 3/4, 7/8, 1 1/8, 1 3/8, 1 1/2, 1 3/4, 2, 2 1/4, 2 1/2" Arbors: M24K, M44, M45P, and 12" extension

Bi-Metal Hole Saw Maintenance Kit 18 Pieces Includes: 20, 25 mm, 1.1/8", 1.1/2", 1.3/4", 2", 2.1/4", 2.1/2", 3", 3.1/4", 3.5/8", 3.3/4", 4.1/4", 4.1/2".Also M24K, M44,

M45P arbors and 12" extension.


Part # QTY

358-101 Ea

Industrial Hole Saw Kit

Hacksaw Blades

Hacksaw Frame


Cutting Tools

Part # SIZE FIT SAWS

358-122358-125358-127

1/4” ROUND7/16 HEX7/16 HEX

9/16 – 1-3/169/16 – 1-3/16

1-1/4 – 6”358-105358-108358-110

1/4 x 3-1/16 DRILL1/4 x 4 DRILL1/4 x 4-5/16 DRILL

EaEaEa

Part # SIZE358-136358-138358-140358-144358-146358-148358-149358-152358-156358-160358-164358-168358-172358-176358-180358-184358-186

5/811/163/47/8

15/161

1-1/161-1/81-1/4

1-5/161-3/81-1/21-5/81-3/41-7/8

22-1/16

Part # SIZE358-188358-192358-196358-200358-201358-204358-206358-208358-210358-211358-212358-214358-216358-218358-220358-224358-226358-230

2-1/82-1/42-3/82-1/22-5/82-3/42-7/8

33-1/83-1/43-1/23-3/4

44-1/84-1/24-3/4

55-1/4

FEATURES & BENEFITSPATENT PENDING TOOTH SET DESIGN - Optimized to Remove Material Faster

NEW CAP - Reduces Runout and Vibration

PREMIUM M42 HIGH SPEED STEEL CUTTING EDGE, 8% COBALT - Over 2X the Life of Our AV Model

CUTTING DEPTH - 1-15/16" (49,2 mm)HEAVY DUTY .050 SIDE WALL - For Greater Stability

NEW SIDE SLOT - Increased Leverage for Faster, Easier Slug RemovalNEW EXTERIOR RED COATING -Reduces Side Wall Friction for Efficient Cutting


Cutting Tools

Part # SIZE358-503358-504358-505

HC-4A ( 5/8, 3/4, 7/8, 1" )HC-4B ( 11/16, 13/16, 15/16, 1-1/16 )HC-5C ( 7/8, 1-1/8, 1-3/8, 1-3/4, 2" )

Type CHC-AG Cuts up to 3/16" — Thin Material

Type CHD-AG Cuts up to 1" — Thick MaterialPart # SIZE

358-506358-507358-508

HCD-4A ( 5/8, 3/4, 7/8, 1" )HCD-4B ( 11/16, 13/16, 15/16, 1-1/16 )HCD-5C ( 7/8, 1-1/8, 1-3/8, 1-3/4, 2" )

Compare 5/8” S & D 1/2 “ Shank Drill against a 5/8” Carbide Tip Hole Cutter on 5/16” Frame Steel to demonstrate the superior cutting performance and speed of the Carbide Tip. The results tell the story. After six exhausting minutes of drilling, the S&D drill had managed to penetrate the steel plate approximately 60% of the way. At this rate, the S&D drill would have needed over 10 minutes to complete the task.

The Carbide Tip Hole Cutter, however, powered through the Frame Steel completelyin just one minute and 18 seconds,

leaving a smooth, complete holeperfect for a 5/8” cap screw.

Carbide Tip Hole Cutter—the choice when time is money.

Time is Money

5/8” S&D 1/2”Shank Drill

6:00

Rough,Incomplete

Hole

Carbide TipHole Cutter

1:18

Smooth,Complete

Hole


Cutting Tools

Part # SIZE358-547358-549358-552358-556358-560358-562358-563358-564358-556358-567358-568358-569358-570358-572358-580358-585358-606358-604358-608358-610358-614358-618358-622358-626

9/165/8

11/163/47/81”

1-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/21-5/8

2”2-1/42-5/162-3/82-7/162-1/22-5/82-3/42-7/8

Carbide Tip Hole SawsCUTS TO 1”

•HEAVY-DUTY HOLE MAKERS - cut sheet metal, steel, stainless steel, iron, cast iron, aluminum, copper, alloys, plate, pipe, tubing, FRP, and plastics.•EXTREMELY FAST CUTTING - cuts up to 10 times faster than a drill bit*.•EXTREMELY LONG LIFE - Lasts up to 10 times longer than heavy-duty drill bits, and 500 times longer than hole saws.•CUTS MATERIALS UP TO 1" THICK -handles tough structural steel, heavy-duty truck frames, and other demanding applications.•SELF-CENTERING PILOT DRILL - just place the cutter where you need it and begin drilling - no wandering on the work piece.•ULTRA-HARD CARBIDE TEETH -provide extremely fast cutting and very long life.•TOOL STEEL BODY & SHANK -extremely tough and breakage resistant.•EASY-TO-CONTROL - even large diameter holes can be cut quickly and easily with a hand drill.•SUPERIOR HOLE QUALITY - produces clean, burr-free, perfectly round holes.•EASY-TO-USE - can be used in lighter, lower power tools than twist drills.•AUTOMATIC SLUG EJECTION - ejects the cut slug when the hole is completed.•FLATTED SHANKS - no slippage in the chuck.

•TRUCK/TRAILER APPLICATIONS:2-3/8" cutter is ideal for 2" diameter lamps2-7/8" cutter is ideal for 7 way trailer plugs4-1/2" cutter is ideal for 4" diameter lamps

Part # SIZE358-747358-749358-752358-756358-760358-762358-763358-764358-756358-767358-768358-769358-770358-772358-780358-785358-806358-804358-808358-810358-814358-818358-822358-826

9/165/8

11/163/47/81”

1-1/161-1/8

1-3/161-1/4

1-5/161-3/8

1-7/161-1/21-5/8

2”2-1/4

2-5/162-3/8

2-7/162-1/22-5/82-3/42-7/8

Carbide Tip Hole SawsCUTS TO 3/16”


Cutting Tools

RotacutCarbide Tipped

Hole Saws

RotaCut's are far superior to twist drills and hole saws. They cut 3x faster and last 10x longer, plus there's no comparison in quality. Use with hand held drills with a 3/8" or 1/2" chuck for holes in sheet metal, plate materials, and plastics up to 1/2" thick. Ideal for: Electrical, Piping, Conduit Work, Sheet metal Fabrication, Spot-weld Removal, Maintenance Installations, HVAC, PHCC, Automotive Aftermarket and many others...

Part # SIZE359-230359-232359-234359-236359-238359-240359-240

5/163/87/161/29/165/83/4

Includes: 11088 Arbor Assembly, Center Punch, extra Pilot, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 and case.

Includes: 11005 Arbor Assembly, Center Punch, extra Pilot, 7/8, 1, 1-1/8, 1-1/4, 1-3/8 and 1-1/2-inch, with a 1/2-inch depth of cut.

CFIS Part # 359-200 (Hougen 11075)

CFIS Part # 359-206 (Hougen 11078)

Part # SIZE359-250359-252359-254359-258359-262359-266

7/81”

1-1/81-1/41-3/81-1/2


Abrasives


Columbus Fleet Industrial Supply

Canton Fleet Industrial Supply

Canton First Aid & Safety

Abrasives

• Product Description• Aluminum oxide grain Surface

Conditioning Quick Change Discs are designed for light grinding, blending, cleaning, gasket removal, and finishing.

• Applications• A-CRS (Brown) – Light grinding,

stock removal, weld splatter, and scale removal

• A-MED (Red) – Remove scratches, pits, and corrosion

• A-VFINE (Blue) – Blending and finishing

• Metals• Stainless Steel• Aluminum• Sheet Metal• Exotic Metals

Part # SIZE GRIT COLOR QT360-021360-024360-027

2”2”2”

FINEMEDIUMCOARSE

BLUEMAROONBROWN

252525

Part # SIZE GRIT COLOR QT360-032360-033360-035360-037

3”3”3”3”

VERY FINEFINE

MEDIUMCOARSE

BLUEMAROONBROWN

25252525


Abrasives

• Product Description

• Scotch-Brite Bristle Disc are molded, abrasive filled bristle disc which is used for automotive use on aluminum and metal. Use this product instead of a wire brush for many tasks including: deburring, blending, polishing, finishing, cleaning, coating, defect removal, scratch removal and rust removal. The product bristle disc is measured using its outside diameter which is 2 inches and 3inches. It’s quick change attachment makes it quick and easy to mount it to the tool or pad. The product rotates and spins, just like other products in its category, at the maximum speed possible. The bristle disc can run at a maximum speed of 25000 RPM. Quantity: ea.

• Scotch-Brite Bristle Discs & Brushes last longer than most abrasives and provide the same finish and cut throughout their life.

• An operator quickly and easily achieves a quality, consistent finish with light pressure.

• For productivity in automated procedures, there are fewer changeovers.

• These fast running discs efficiently clean or strip many substances from metal surfaces without damaging the work piece.

• Consistent supply of abrasives


2”2”2”

FINEMEDIUMCOARSE

WHITEYELLOWGREEN

EAEAEA


3”3”3”

FINEMEDIUMCOARSE

WHITEYELLOWGREEN

EAEAEA

3-M SURFACE CONDITIONING

DISC


Abrasives

• Features and Benefits• Coated abrasives can be used for most

applications, from grinding to polishing. They consist of a thin layer of abrasive adhered to fiber, paper, cloth or rubber. Coated discs are normally used on angle grinders.

• Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture resistant. Commonly used on ferrous alloys, high-tensile materials and wood.

• Type R discs feature roll-on/off fasteners.

Part # SIZE GRIT QT360-132 3” 80 25360-135 3” 60 25360-137 3” 50 25360-139 3” 40 25360-141 3” 36 25360-143 3” 24 25

Part # SIZE GRIT QT360-102 2” 80 25360-104 2” 60 25360-106 2” 50 25360-108 2” 40 25360-110 2” 36 25360-112 2” 24 25

CFIS Ceramic Sanding Disc

Part # SIZE GRIT QT360-210 2” 36 25360-212 2” 24 25

Part # SIZE GRIT QT360-220 3” 36 25360-222 3” 24 25


Abrasives

• CFIS MAROON STRIP DISC

• ULTIMATE PERFORMANCE – Removes heavy rust and corrosion, paint and other thick coatings

• EXTREME LONG LIFE – Lasts up to 4 times as long as conventional high performance stripping discs

• AGGRESSIVE SURFACE STRIPPING –Proprietary blend of durable ceramic alumina grain and an advanced resin bond system rapidly removes up to twice as much surface contamination as conventional stripping discs

• FLEXIBLE & CONFORMABLE – Conforms to irregular and contoured surfaces

• VERSATILE – Use one disc for multiple types of surface stripping operations

• SUPERIOR CONTROL – Light pressure provides smoother surface finishing –Additional pressure allows more aggressive material removal

• OPEN STRUCTURE DESIGN – Will not load up on coatings and metals and resist snagging when deburring

• REDUCED DOWN TIME – Longer lasting discs offer fewer disc change-outs and less user down time

• TYPE-R MOUNT – Provides fast and reliable ½ turn-on, ½ turn-off attachment.

METALDEVILS

• CFIS BLACK STRIP DISC

Part # GRIT SIZE QT361-510361-514361-516

CoarseCoarseCoarse

2”3”4”

222

Part # GRIT SIZE QT361-502361-504361-506

X-CoarseX-CoarseX-Coarse

2”3”4”

222

Scarlet Metal Devils

Black Metal Devils


Abrasives

• ULTIMATE PERFORMANCE – Removes heavy rust and corrosion, paint and other thick coatings

• EXTREME LONG LIFE – Lasts up to 4 times as long as conventional high performance stripping discs

• AGGRESSIVE SURFACE STRIPPING –Proprietary blend of durable ceramic alumina grain and an advanced resin bond system rapidly removes up to twice as much surface contamination as conventional stripping discs

• FLEXIBLE & CONFORMABLE – Conforms to irregular and contoured surfaces

• VERSATILE – Use one disc for multiple types of surface stripping operations

• SUPERIOR CONTROL – Light pressure provides smoother surface finishing –Additional pressure allows more aggressive material removal

• OPEN STRUCTURE DESIGN – Will not load up on coatings and metals and resist snagging when deburring

• REDUCED DOWN TIME – Longer lasting discs offer fewer disc change-outs and less user down time

• TYPE-R MOUNT – Provides fast and reliable ½ turn-on, ½ turn-off attachment.

METALDEVILS

• CFIS BLACK STRIP DISC

Scarlet Metal Devils

Black Metal Devils

• CFIS MAROON STRIP DISC

Part # GRIT SIZE QT361-560361-555

CoarseCoarse

4-1/2 X 7/84-1/2 X 5/8-11

11

Part # GRIT SIZE QT361-580361-585

HDXCRSHDXCRS

4-1/2 X 7/84-1/2 X 5/8-11

11


Abrasives

• Product features• Outperforms steel wool for cleaning,

blending, prepping and finishing on metal, wood, plastics and composites

• Performs like steel wool without shredding, rusting, or splintering

• Pad conforms to irregular surfaces and gets into corners without losing performance

• Cleans metal, composites, and other materials without altering the base material

• Load and heat resistant non-woven web provides consistent finishing over the life of the pad

• Product description• Scotch-Brite hand pad combines

durability for long life, flexibility for reaching tight areas, and can be used in place of steel wool for conditioning metal surfaces and paint prep. Unlike fine steel wool, Scotch-Brite pads will not shred during use, rust after use, or leave fine metal splinters.

Part # WIDTH LENGTH COLOR QT

360-535360-540360-545360-550360-555360-560

6 x 96 X 96 X 96 X 96 X 96 X 9

ULTRA FINEFINEFINE

MEDIUMCOARSE

HEAVY DUTY

WHITE (STAINLESS)BLACK (STAINLESS)

GRAYGREEN

MARRONTAN

101010101010

Part # SIZE WIDTH QT361-518 2” 1” EA361-520 3” 1” EA361-522 4” 1” EA

SURFACE CONDITIONING

DISC

METALDEVILS


Abrasives

Part # GRIT QT364-750364-752364-754364-756

6080120180

EaEaEaEa

Grit 60, 80, 120, 180

Diameter 3”

Width 2"

Mandrel 1/4"

CFIS ULTRA WOVEN SCOTCHBRITE FLAP WHEELSFlexible, conforms to irregular surfaces in a hand held form • Removes burrs and micro burrs on threaded parts • Finishing aluminum extrusions, brass, and stainless steel • Fine scratch pattern for preparation of cutlery and cookware • Re-orient grain finish on stainless steel and strike plates

Excellent for removing heavy oxidation, blending, cleaning, and deburringFor use on: Aluminum, Metal, Stainless, Wood


Abrasives

Part # SIZE FACE GRIT MAX RPM

QT

365-108365-112365-116

3/4”3/4”3/4”

3/4”3/4”3/4”’

6080120

25,00025,00025,000

222

365-122365-124365-126365-128

1”1”1”1”

1”1”1”1”

6080120180

25,00025,00025,00025,000

2222

365-134365-136365-138

1-1/2”1-1/2”1-1/2”

1”1”1”

6080120

25,00025,00025,000

222

365-142365-144365-146365-148365-150365-152

2”2”2”2”2”2”

1”1”1”1”1”1”

406080120180240

25,00025,00025,00025,00025,00025,000

222222

365-182365-184365-186365-188

3”3”3”3”

1”1”1”1”

406080120

25,00025,00025,00025,000

2222

CFIS FLAP WHEELS•Aluminum oxide abrasive cloth.•Provides consistent grinding and finishing action throughout the lifeof the wheel.•Fresh new abrasive edges are continuously ex posed to the work.•Non-loading: Flexible flaps prevent loading that occurs with rigidabrasives.•Conforms to concave and convex surfaces allowing access tohard-to-reach areas.•1/4" shank on all wheels is bonded into an epoxy core.

Applications:•Final finish on metal surfaces.•Deburring and flash removal on machined parts.•Edge blending.•Blending and finishing of dies, molds, tools, tubing, channels.•Cleaning.•Smoothing metal, plastic, wood, rubber.•Removing tool marks.•Finishing for painting, plating.


Abrasives

CFIS Zirconia grain Mini Flap Quick Change Discs are designed for controlled grinding, blending, and finishing.

MetalsStainless steelAluminumMild steel

FeaturesUnique flap design for flexibilitySmall diameter for access into small areasQuick lock system for easy product changeoverLong life compared with resin fiber discs

ApplicationsBlending and finishingRemoving machine tool marksGeneral cleaningContouring

Part # SIZE GRIT QTY

361-420361-425361-430361-435361-440

3”3”3”3”3”

36406080120

EaEaEaEaEa

Part # SIZE GRIT QTY

361-410361-412361-414361-416361-418

2”2”2”2”2”

36406080120

EaEaEaEaEa


Abrasives

CFIS Max Force flap discs utilize a zirconia abrasive - a sharp and long-life abrasive grain known for excellent material removal. Max Force flap discs are offered in two styles: Max Force HD using a high-density construction for a thicker, more cushioned contact with the surface, and Max Force - the standard profile flap disc construction.

Main application - high performance grinding and finishing of all metalsExcellent on stainless, mild steel, welds, and de-burringHigh density profileOutlasts standard density discs by 50%Zirconia grain outlasts aluminum oxide up to 3-to-1

Part # SIZE ARBOR TYPE GRIT QTY361-312361-314361-316361-320

4-1/2 4-1/2 4-1/24-1/2

5/8-115/8-11 5/8-11 5/8-11

FLATFLATFLATFLAT

120806040

EaEaEaEa

Part # SIZE ARBOR TYPE GRIT QTY361-302361-304361-306361-310361-311

4-1/2 4-1/2 4-1/24-1/24-1/2

7/8 HOLE7/8 HOLE7/8 HOLE7/8 HOLE7/8 HOLE

FLATFLATFLATFLATFLAT

12080604036

EaEaEaEaEa

Part # SIZE ARBOR TYPE GRIT QTY361-360 4-1/2 7/8 HOLE 29 40 Ea

Part # SIZE ARBOR TYPE GRIT QTY361-380 6” 7/8 HOLE FLAT 60 Ea


Abrasives

WHY USE CFIS PLATINUM RAZOR-FLAP C3 DISCS?The C3 is one of the most modern and versatile flap discs in the world today. Due to its unparalleled innovative ceramic hybrid technology, all metals can be machined in record time with just one grit. User-friendly since there are no glass fiber components

FEATURES• Multi-Grain (40/60) (60/80) (80/120)

(120/140) for all metals (such as steel, stainless steel, titanium, bronze, aluminum).

• Backing plate can be fully trimmed -entire disc can be used

• Grinding transitions are particularly soft due to optimum adjustment to the work piece

• Reduced working steps due to grinding and finishing hybrid

• Natural fiber backing plate minimizes odors and has a vibration damping effect

Part # SIZE ARBOR TYPE GRIT QTY361-220361-224361-228

4-1/2 4-1/2 4-1/2

5/8-115/8-115/8-11

FLATFLATFLAT

806040

EaEaEa

Part # SIZE ARBOR TYPE GRIT QTY361-220361-224361-228

5”5”5”

5/8-115/8-115/8-11

FLATFLATFLAT

806040

EaEaEa


Cutting Wheels

Part# Size Qty.

362203 3 x 1/16 x 3/8 10

• Ultra Cut thin cut-off wheels turn your small cut-off tool into a turbocharged cutting machine. Fast cutting and long lasting! It tackles every type and cross-section of material with impressive results. Ultra Cut wheels will get your job done with maximized performance – just simply pair it with your high powered cut-off tool today.

• Primary application – structural steel, iron, welds, etc. (ferrous metals)

• Ideal for sheet metal• Also used for stainless steel and high

tensile alloys• 1/16 thickness with medium fine grit• Treated aluminum oxide grains

CFIS ULTRA CUT 3 x 1/16 x 3/8

Part # SIZE HOLE TYPE MAX RPM QT362-200362-201362-202362-203362-206362-208362-210362-211362-212362-213362-215

2 x 1/322-1/2 X 1/16

3 X 1/163 X 1/163 X .0354 X .0354 X 1/164 X .0354 X .0454 X 1/164 X .035

3/83/81/43/83/81/43/85/85/85/85/8

A36TA36TA36TA36TA36TA36TA60SA60SA60TA60TA60T

25,00025,00025,00025,00019,00019,00019,00019,00019,00019,00019,000

1010101010101010101010

CFIS CUTTING WHEEL ARBOR

Part# Desc Qty.

362-196 CUT-OFF ARBOR 1/4 & 3/8 Ea


Cutting Wheels

Part# Size Qty.

362-215362-220

4-1/2 x .045 x 7/86” X .045 X 7/8

1010

CFIS ULTRA CUT HIGH ENERGY

CFIS High Energy thin cut-off wheels offer a premium level of performance and extended wheel life. They are a slightly thicker version of our Lightning wheels, yet still maintain the rapid cutting quality of thinner wheels.• Primary application - ferrous metals and

stainless applications• A rigid, thicker wheel with improved grain

and resin combination to take on the most demanding cutting applications

• .045" thickness• Long life and faster cutting

CFIS Max Force thin cut-off wheels turn your grinder into a turbocharged cutting machine. These are the fastest cutting and longest lasting wheels we have ever designed - they tackle every type and cross-section of material with impressive results. If you are using a high-powered grinder and want to maximize performance, Max Force wheels are the ones that will get you to the winner's circle.

• Primary application - stainless steel and high tensile alloys

• Secondary application - ferrous metals (structural steel, iron, welds, etc.)

• .040" thickness• Super premium• Long life and faster cutting• Zirconia grain

Part# Size Qty.

362-218362-233362-222

6 X .040 X 7/86 X .045 X 7/87 X .040 X 7/8

101010

CFIS ULTRA CUT MAX FORCE


Cutting Wheels

Part# Size Qty.

362-211 4 X .040 x 5/8 10

CFIS ULTRA CUT LIGHTNING

CFIS Lightning wheels are essentially a thinner version of our High Energy formulation. All the same great performance with slightly faster cutting speed and smaller cut-line in the material being worked on. Due to their thinner profile, Lightning wheels had added flexibility, allowing them to get into tight areas.• Primary application - ferrous metals

(steel, iron, welds, etc.)• .040″ thickness• Fast, cool, burr-free cutting• Specially treated aluminum oxide grain

for increased performance

CFIS Competitor wheels are an entry-level cutting wheel designed for most applications.Primary application - ferrous metals (steel, iron, welds, etc.)Value lineGeneral purpose

Part# Size Qty.

362-212 4 X .045 x 5/8 10

CFIS ULTRA CUT COMPETITOR


Cutting Wheels

Part# Size Qty.

362-230362-235

41/2 X .045 x 7/86 X .045 X 7/8

1010

CFIS TYPE 27 HIGH ENERGY

CUT-OFF WHEELS

CFIS High Energy thin cut-off wheels offer a premium level of performance and extended wheel life. They are a slightly thicker version of our Lightning wheels, yet still maintain the rapid cutting quality of thinner wheels.• Primary application - ferrous metals and

stainless applications• A rigid, thicker wheel with improved grain

and resin combination to take on the most demanding cutting applications

• .045" thickness• Long life and faster cutting

CFIS Lightning wheels are essentially a thinner version of our High Energy formulation. All the same great performance with slightly faster cutting speed and smaller cut-line in the material being worked on. Due to their thinner profile, Lightning wheels had added flexibility, allowing them to get into tight areas.Primary application - ferrous metals(steel, iron, welds, etc.)

.040″ thicknessFast, cool, burr-free cuttingSpecially treated aluminum oxide grain for increased performance

Part# Size Qty.

362-228362-240

4 X .040 x 5/87 X .040 x 7/8

1010

CFIS TYPE 27 LIGHTNING

CUT-OFF WHEELS


Cutting Wheels

CFIS GAS / ELECT PORTABLE SAW WHEELS

Part# Size Qty.

362-272 14 x 1/8 x 20 mm EA

CFIS High Energy portable cut-off saw specifications are designed to be versatile performers on all types and sizes of metal and masonry materials. Utilizing a special bond system developed by Bullard engineers, these wheels out cut and out last competitors while offering excellent value on a price/performance ratio.

• Primary application - thin metals, roof, decking, car dismantling

• Premium wheel, formulated to prevent wheel breakdown caused by sharp, metal edges

• Specially treated aluminum oxide grain and hard bond


Part# Size Qty.

362-266 14 x 1/8 x 1” EA


• Primary application - ferrous metals (structural steel, iron, rebar, etc.)

• Premium performance wheel formulated for longer life in most demanding jobs

• Treated aluminum oxide grains


Cutting Wheels


Part# Size Qty.

362-275362-280362-265362-270

12 X 1/8 X 1”12 x 1/8 x 20 mm14 x 1/8 x 1”14 x 1/8 x 20 mm

EAEAEAEA

CFIS Lightning Wheels specifications offer industrial performance at a modest price. Manufactured in the USA, the quality and high-performance in both metal and concrete formulations exceed the performance of lower cost imports. A real value for the budget-minded buyer.

• Primary application - ferrous metals (structural steel, iron, rebar, etc.)

• A consistently performing wheel for a variety of cutting applications

• Aluminum oxide grains


Part# Size Qty.

362-285362-295

12 X 1/8 X 1”14 x 1/8 x 1”

EAEA


• Primary application - cured concrete, masonry, brick, block, and stone

• Premium wheel with hard bond• Silicon carbide grain


Cutting Wheels


Part# Size Qty.

362-290 12 x 1/8 x 20 mm EA

CFIS Lightning specifications offer industrial performance at a modest price. Manufactured in the USA, the quality and high-performance in both metal and concrete formulations exceed the performance of lower cost imports. A real value for the budget-minded buyer.

• Primary application - cured concrete, masonry, brick, block, and stone

• Popular choice for masonry work• Silicon carbide grain


Cutting Wheels

CFIS PORTABLE CHOP-SAW WHEELS

Part# Size Qty.

362-250362-255

12 x 3/32 x 1”14 x 3/32 x 1”

EAEA

CFIS Lightning chop saw wheels are the most versatile wheels and offer great performance on all metals. Lightning wheels are offered in both 3/32" and 7/64" thicknesses, so operators can match wheels to the horsepower level of their saw. Using the 7/64" thickness is generally preferred when using saws rated at 5.5 horsepower.

• Primary application - ferrous metals (structural steel, heavy rebar, channel, iron, angle iron, etc.)

• Fast cutting wheel on thicker profile materials such as angle iron, pipe, and rebar

• Consistent performance on a variety of cutting applications

CFIS CIRCULAR SAW WHEELS

Part# Size Qty.

362-224 7 x 3/32 x 5/8” EA

CFIS Lightning specifications offer industrial performance at a modest price. Manufactured quality and high performance in both metal and concrete formulations that exceed the performance of lower cost imports, yet only cost a fraction more. A real value for the budget-minded buyer.

• Primary application - ferrous metals (angle iron, rebar, steel, metal tubing, etc.)

• Harder bond for improved wheel life and increased performance

• Aluminum oxide grain


Grinding Wheels

CFIS FIRE GRIND

• • State-of-the-Art Ceramic Grain = Rapid Material Removal and

• Cool Grinding for Improved Productivity

• Designed to Enhance Surface Work Area and Increase Disc Life

• • Superior Ergonomic Design Delivers Ease of Use - Unparalleled

• Productivity = Up to 50% Reduction in Process Time with

• • Vibration-Free Performance = Reduction of Noise, Dust and

• Operator Fatigue

• 70% LIGHTER than a conventional grinding wheel.

• • User-Friendly = Rugged Yet Lightweight Construction

• Applications:

• • Weld bead removal

• • Surface grinding

• • Edge grinding and deburring

• • Chamfering and beveling

• • Flame-cut steel removal

Part # SIZE COLOR QT362-034362-038

4-1/2”5”

7/8” ARBOR7/8” ARBOR

EAEA

CFIS CERAMIC FIRE GRIND


Grinding Wheels

CFIS Alloy Eater When you need versatility to cut and grind on various types of materials, look no further than our High Energy lineup. Formulated to tackle any job quickly and with precision. A very well suited choice for all fabrication projects involving mild steel.• Primary application - ferrous metals

(structural steel, iron, welds, etc.)• Premium grinding wheel made of

higher quality abrasive grain• Enhanced wheel life with strong stock

removal rate

CFIS ALLOY EATER HIGH ENERGY GRINDING WHEELS

Part# Size Qty.

362-104362-125362-100362-120

4-1/2 x 1/4 x 7/84-1/2 X 1/4 X 5/8-114 X 1/4 X 5/87 X 1/4 X 7/8

EAEAEAEA

CFIS MAX FORCE GRINDING WHEELS

Part# Size Qty.

362-105362-127362-126

4-1/2 x 1/4 x 7/84-1/2 X 1/4 X 5/8-117 X 1/4 X 5/8-11

EAEAEA

CFIS Max Force grinding wheels aggressively remove steel in the most challenging applications. Whether smoothing flame-cut edges on heavy gauge plate, grinding casting parting lines, or any grinding operation where heavy stock removal is desired - Max Force wheels get it done to perfection. They are designed for maximum rate of material removal with extended service life. This formulation performs especially well on premium grinders that deliver a lot of torque. On a cost-per-pound comparison, these wheels give the best bang for your buck.

• Primary application - stainless steel and high tensile alloys

• Secondary application - ferrous metals (structural steel, iron, welds, etc.)

• Premium grinding wheel made of higher quality zirconia grains

• Superior stock removal and wheel life


Grinding Wheels

• CFIS A general purpose formulation with attitude. Don't be mistaken, this is a serious workhorse that strikes a great balance between wheel life and material removal. Made in the USA to exacting standards so you can expect consistent performance from every single wheel. Lightning wheels are a good choice for applications where versatility of material type and fast removal rate are important to the operator.

• Primary application - ferrous metals (structural steel, iron, welds, etc.)

• Softer bond - improved grinding time and reduced operator fatigue

• Fast stock removal

CFIS LIGHTNING GRINDING WHEELS

Part# Size Qty.

362-102362-130362-106362-108362-131362-118362-135362-140

4-1/2 x 1/4 x 7/84-1/2 X 1/4 X 5/8-115 X 1/4 X 7/86 X 1/4 X 7/86 X 1/4 X 5/8-117 X 1/4 X 7/87 X 1/4 X 5/8-119 X 1/4 X 5/8-11

EAEAEAEAEAEAEAEA

CFIS HIGH ENERGY GRINDING WHEELS

Part# Size Qty.

362-103362-132

4-1/2 x 1/4 x 7/84-1/2 X 1/4 X 5/8-11

EAEA

CFIS HIGH ENERGY GRINDING WHEELS offer Versatile and long-life grinding wheels for almost all ferrous and non-ferrous materials. We offer three distinct formulations for mild steel, stainless, and aluminum - all providing rapid grinding action and industry leading wheel life. Achieves great performance on all quality levels of electric and air grinders. Priced lower than the Max Force lineup while still offering extended performance.

• Primary application - non-ferrous metals (aluminum, brass, and copper)

• Special formulation with softer bond to prevent loading

• Fast stock removal

Part# Size Qty.

362-137 7 X 1/4 X 5/8-11 EA

DEPRESSED CENTER


Grinding Wheels

• CFIS Max Force The professional's choice for any major pipe welding application. These wheels do it all -bevel, root pass, and finish. The ruggedness of these wheels help maintain a nicely profiled edge for consistent grinding of weld bead between pipe sections. Offers great operator control with smooth cutting action as the result of the exceptional wheel balance.

• Primary application - stainless steel, high tensile alloys

• Exceeds the demands of the oil and gas pipeline industry

• Premium zirconia abrasive grains• Harder bond for improved wheel life

and increased performance

CFIS PIPELINE GRINDING WHEELS

Part# Size Qty.

362-112 6 X 1/4 X 7/8 EA

• CFIS Lightning wheels provide a great value for applications where wheel cost is a primary concern. Made of aluminum oxide, these wheels work well on nearly all metals and give performance equal to or better than the top-tier products offered by other companies. This is a great value for your abrasive dollar.

• Primary application - ferrous metals (structural steel, iron, welds, etc.)

• General performer for root pass grinding in the oil and gas pipeline industry

• Harder bond for improved wheel life and increased performance

CFIS PIPELINE GRINDING WHEELS

Part# Size Qty.

362-150 6 X 1/8 X 7/8 EA


Sanding Paper• Premium aluminum oxide grain. • Special agents virtually eliminate

loading.• Flexible resin bond system

produces greater resistance to heat and increased durability.

• Cool, free cutting action over long periods of time, Lasts up to 300% longer than other PSA rolls.

• Excellent for hand-sanding and block-sanding on all paint coatings and non-ferrous metals.

• 100% impervious to bonding breakdown by water, cutting fluid, grease, chemicals, and other solvents.

• Exposure to solvents will not cause abrasive loss or loading.

• Extended service life compared to standard "Dry" abrasive cloth when used in dry applications.

• Convenient and effective for deburring, cleaning, and polishing metal parts.

• Supplied in 50 yard rolls on spools for easy dispensing.

Part # GRIT LENGTH WIDTH QTY363-012363-014363-016363-020363-022363-024363-026

6080

120180240320400

50 YD50 YD50 YD50 YD50 YD50 YD50 YD

1 1/21 1/21 1/21 1/21 1/21 1/21 1/2

EaEaEaEaEaEaEa

Shop Rolls / Aluminum Oxide 50 Yd Rolls

Part # GRIT WIDTH LENGTH363-032 600 1-1/2 50 YD

Crocus Sand Paper

Part # GRIT LENGTH WIDTH QTY363-155363-160363-165

80120180

10 YD10 YD10 YD

1 1/21-1/21-1/2

EaEaEa

Abrasive Screen 10 Yd Rolls

• Ferrous Oxide based abrasive grain.

• Ideal for cleaning and polishing soft metals.

• Flexible cloth backing allows easy working on curved surfaces.

• 1-1/2” x 50 yard roll.

• Made with silicon carbide grain, a sharp synthetic mineral that cuts fast.

• Drywall screen is waterproof; open mesh design resists loading –rinse and reuse.

• Ideal for sanding drywall compound and patching plaster prior to priming.


Sanding Paper

Part # GRIT QT364-530364-540364-542364-546

5” X 805” X 1205” X 1805” X 240

10010010050

Part # GRIT QT364-565364-570364-575364-580364-585364-590364-593364-596

6” X 406” X 80

6” X 1206” X 1806” X 2406” X 3206” X 4006” X 600

5050505050505050

Stick-It Sanding Disc Arbor

Part # DESCRIPTION QTY364-505364-506

5” Arbor6” Arbor

EaEa

Tough backing for extremely good durability.High performance aluminum oxide grain provides long service life.Adhesive backing is Pressure Sensitive, holds fast when in use, peels off easy when changed.Will not leave behind adhesive residue.Excellent for general grinding, deburring and blending.

MADE IN THE U.S.A.

• Grinding and stock removal• Edge breaking, surface blending• Cost effective when sanding materials thatload or gum up• Semi-open coat with load-resistant size coatfor aggressive action• Great for sanding fiberglass

• Materials Tool Selector• Ferrous• Non-Ferrous• Plastics• Wood• Solid Surfaces• Composites

CFIS Shur-Kut Peel & Stick Abrasives

Disc


Wire Wheels

Diameter: 1/2”, 3/4”, 1”

Material: High Carbon Alloy

Max. RPM: 20,000

CFIS HIGH PERFORMANCE WIRE END BRUSHES•UNIQUE HIGH TENSILE ALLOY WIRE:

High carbon alloy provides 20% greater life than conventional wire wheel brushes.•INCREASED WIRE FLEXIBILITY:

Reduces wire fatigue, increases working life, and decreases potential for wire "throw-out".•BRASS COATED WIRE: Prevents rust and corrosion for extended service life.

Part # DIAMTRIM

LENGTH QT367-422367-424367-426

1/2”3/4”1”

1”1”1”

EaEaEa

Diameter: 3/4”, 1”, 1-1/4”

Material: .020 Tempered Steel

Max. RPM: 20,000

CFIS HIGH PERFORMANCE KNOTTED WIRE END BRUSHES•UNIQUE HIGH TENSILE ALLOY WIRE:



Part # DIAMTRIM

LENGTH QT367-444367-446367-448

3/4”1”

1-1/4”

1”1”1”

EaEaEa


Wire Wheels

STAINLESS STEELDiameter: 3/4”, 1”

Material: Stainless Steel

Max. RPM: 20,000

CFIS HIGH PERFORMANCE STAINLESS STEEL KNOTTED WIRE END BRUSHES•UNIQUE HIGH TENSILE STAINLESS ALLOY WIRE:

Stainless Steel alloy provides 20% greater life than conventional wire wheel brushes.•INCREASED WIRE FLEXIBILITY:

Reduces wire fatigue, increases working life, and decreases potential for wire "throw-out".

Part # DIAMTRIM

LENGTH QT367-460367-462

3/4”1”

1”1”

EaEa

STAINLESS STEEL

Diameter: 1-3/4”, 2”, 2-1/2”


Max. RPM: 20,000

CFIS HIGH PERFORMANCE WIRE END BRUSHES•UNIQUE HIGH TENSILE ALLOY WIRE:



Part # DIAMTRIM

LENGTHMATERIAL

QT367-428367-430367-435367-440367-464

1-3/4”2”2”

2-1/2”1”

1”1”1”1”1”

STEELSTEEL

STAINLESSSTAINLESS

BRASS

EaEaEaEaEa


Wire Wheels

Diameter: 1-1/2”, 2”, 2-1/2”, 3”


Max. RPM: 15,000

CFIS HIGH PERFORMANCE WIRE BRUSHES•UNIQUE HIGH TENSILE ALLOY WIRE:



Part # DIAMRPM

QT367-476367-480367-482367-484

1-1/2”2”

2-1/2”3”

20,00015,00015,00015,000

EaEaEaEa

STAINLESS STEELDiameter: 2”, 3”


Max. RPM: 15,000

CFIS HIGH PERFORMANCE STAINLESS STEEL WIRE BRUSHES•UNIQUE HIGH TENSILE STAINLESS ALLOY WIRE:

Stainless Steel alloy provides 20% greater life than conventional wire wheel brushes.•INCREASED WIRE FLEXIBILITY:


Part # DIAMRPM

QT367-490367-494

2”3”

15,00015,000

EaEa

STAINLESS STEEL

Part # DIAMRPM

QT367-502367-504

2-1/2”3”

15,00015,000

EaEa

FLARED STAINLESS STEEL


Wire Wheels

Diameter: 3” , 4”


Max. RPM: 20,000




Diameter: 2”, 3”


Max. RPM: 15,000



Reduces wire fatigue, increases working life, and decreases potential for wire "throw-out".•BRASS COATED WIRE: Prevents rust and corrosion for extended service life.".

Part # DIAM ARBORWIRESIZE

MAX. SAFESPEED QT

367-354367-356

4”6”

5/8-115/8-11

.020

.02012,50012.500

EaEa

Twist Knotted Wire Wheel Brush

Part # DIAM SHANKWIRESIZE

TRIMLENGTH

MAX. SAFESPEED QT

367-525367-530

3”4”

1/4”1/4”

.0140

.01401”1”

25,00020,000

EaEa

Twist Knotted Wire Wheel Brush


Wire Wheels

Diameter: 2-3/4”, 3-1/2”, 4”, 5”


Max. RPM: 12,500




Diameter: 2”, 3”


Max. RPM: 7,000



Reduces wire fatigue, increases working life, and decreases potential for wire "throw-out".•BRASS COATED WIRE: Prevents rust and corrosion for extended service life.".


MAX. SAFESPEED QT

367-330367-334367-336367-340

2-3/43-1/2

4”6”

5/8-115/8-115/8-115/8-11

.020

.020

.020

.020

7,0007,0007,0007,000

EaEaEaEa


MAX. SAFE

SPEEDQT

367-303367-304367-306367-308

2-3/43-1/2

4”5”

5/8-115/8-115/8-115/8-11

.020

.020

.020

.020

12,50012,50012,50012,500

EaEaEaEa

Large Crimped Wire Cup Brush

Large Knotted Wire Cup Brush

367-345 4” 5/8-11 .020 7,000 EaStainless Steel


Wire WheelsCFIS HIGH PERFORMANCE WIRE BRUSHES•UNIQUE HIGH TENSILE ALLOY WIRE:



Part # SIZE ARBORNESTED

BUSHINGS GRITMAXRPM QTY

366-506 6” 1” 1/2, 5/8, 3/4 HEAVY DUTY

4,138 Ea

366-515 8” 1-1/4” 1/2, 5/8, 3/4 HEAVY DUTY

3,600 Ea

Grinding Wheels

Part # SIZE WIRE ARBOR WIDTHMAXRPM QT

Y366-557366-559

6”6”

.014

.0141/2, 5/81/2, 5/8,

3/4” H/DWIDE

6.0006,000

EaEa

366-565 7” .014 1/2, 5/8, WIDE 6,000 Ea366-577366-579

8”8”

.014

.0141/2, 5/8

1/2, 5/8,,3/4” H/D

WIDE4,5004,500

EaEa

Part # SIZE QTY366-548366-550

5/8 ARBOR INSERT3/4 ARBOR INSERT

EaEa

Part # SIZE WIRE ARBOR WIDTHMAXRPM QTY

366-562 6” 12 1/2, 5/8 3/4” H/D 6.000 Ea366-582366-584

8”8”

1612

1/2, 5/8,1/2, 5/8

3/4” H/D3/4 H/D

4,5004,500

EaEa

Crimped Wire Wheels

Twisted Wire Wheels


Cutting Tools - CFIS Group Tools Drill Sets & Empty Index New CFIS Cryogenically Treated Drills Part...

Documents

Transcript of Cutting Tools - CFIS Group Tools Drill Sets & Empty Index New CFIS Cryogenically Treated Drills Part...