Custom Vehicle Applications February 2014. Internal usage only Common Customizations Deck Plate...

15
Custom Vehicle Applications February 2014

Transcript of Custom Vehicle Applications February 2014. Internal usage only Common Customizations Deck Plate...

Page 1: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Custom Vehicle Applications

February 2014

Page 2: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only2

Common Customizations

Deck Plate Thickness- 3/8", ½" ¾"

Wear Plates- Fully welded

Grain Dumps- Full Grain Dump, 4', 8'

Access Openings

Larger Manholes

Stainless Steel Base Plates

Heavy Duty Side Bumpers

Trailer Pads

Cryogenic SS Plates

Custom Finish- Polyurethane Top Coat

- Galvanize (Beam products)

- Zinc Primer

- Double Paint

Dual Side Rails

Service Base Plates

Scale Extensions

Center Bumping

Pit Coping

Custom Conversion Plates

Multi-axle Sizes

Custom Risers

Mod Refurbish

Page 3: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only

Grain/Chemical Dump Through

Full Dump Through 2' Dump Through

4' Dump Through 8' Dump Through

Page 4: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only4

VTC221 + Grain Dump

Page 5: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only5

Custom Finishes

Page 6: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only6

14' Wide Scales

Page 7: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only7

State DOT Applications

Page 8: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only8

Advanced Filling Applications

Page 9: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only9

Long Scale Applications

Page 10: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only10

Axle Scales

Page 11: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only11

Steel Coil Scales

Page 12: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only12

7360 Combos

Page 13: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only13

Mod Refurbishing

Page 14: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only14

Custom 40 Meter Railroad Scales

40 meter 10+10+10+10 Meter VRS241 Railroad Scale MT-AUS

12+8+4 Meter Hazardous Area 7260 MT-RU

- Refinery fills to 1200 Rail Cars per Day

Page 15: Custom Vehicle Applications February 2014. Internal usage only Common Customizations  Deck Plate Thickness - 3/8", ½" ¾"  Wear Plates - Fully welded.

Internal usage only15

Questions

Questions?Questions?