Custom Valances - Special Designs...Valances 60-1/16" to 96" Traditional Arch Valances 16" to 60"...

11.1

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts

Summer 2011 Conestoga Wood Specialties Corporation

Custom Valances - Special Designs

Conestoga offers a wide variety of arched panel configurations and options. Valances illustrated on the following pages represent popular custom arched panel designs. The manufacturing of custom valances is based off of customer-supplied dimensioned drawings. If any of the following illustrations below match the look you desire, please copy the appropriate page, designate needed dimensions and fax to Customer Service.

Arched panel valances are available in most mortise and tenon and miter designs. Applied moulding designs, while commonly available, depend on the radius of the panel. Cornwall, Cotswald, Newbury and Monaco designs are not available.

Design options include, but are not limited to all published panel raises and framing beads, edge profiles, grooved panels, wide framing, and custom rise dimensions.

A CAD drawing will be created prior to the manufacturing of any custom arched panel. After a review and sign off by the customer, the drawing must be faxed back to Special Designs in order for production to begin. Lead-time calculations will not begin until Conestoga has received an approved drawing.

C

B

ADesign Option A

•Framingwidthswillmatch door style selected unless otherwise noted by customer.

•Pleaseprovideappropriatesizes when ordering.

Design Option B



Design Option C



C

B

A

C

B

A

D

SizesA _________B _________C _________GrainDirectionVertical ____Horizontal __

SizesA _________B _________C _________GrainDirectionVertical ____Horizontal __

SizesA _________B _________C _________D _________GrainDirectionVertical ____Horizontal __

11.2

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts

Conestoga Wood Specialties Corporation Summer 2011

Custom Valances - Special Designs (continued)

C

B

A

C

B

A

C

B

A

C

B

A

D

Design Option D

•Framingwidthswillmatchdoor style selected unless otherwise noted by customer.


Design Option E



•Availablewithhorizontalgrain only.

Design Option F



Design Option G (applied moulding)



Design Option H



SizesA _________B _________C _________Grain DirectionVertical ____Horizontal __

SizesA _________B _________C _________

SizesA _________B _________C _________Grain DirectionVertical ____Horizontal __

SizesA _________B _________C _________D _________Grain DirectionVertical ____Horizontal __

SizesA _________B _________C _________D _________Grain DirectionVertical ____Horizontal __

C

B

A

D

11.3

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts

Summer 2011 Conestoga Wood Specialties Corporation

Custom Valances

Arched Valance

Arched Raised Valance Offering and Availability

ArchedRaisedPanelValancesareavailableonlyinthreeinchwideincrementsfrom30"to72".

Minimumsizeis30"widex12-1/2"high.Framingwidths:2-3/4"stiles,2-5/16"rails,2-1/2"uprightmid-rail.Thedistancefromthemostnarrowpointtothewidestpointisalways4-1/2",regardlessofvalance width.

Horizontal grain panels are standard, vertical grain is available; upcharge applies.

Design standard as shown. Individual designs, including applied moulding, must be ordered through Special Designs.

Species

Material Pricing Guide All3/4"and1"speciesavailable,except1"quartersawnandrusticknotty species.

Edge Profiles

Page 5.1 Machine edge, no other choices available.

Framing Beads

Page 5.2 All3/4"and1"available.

Panel Raise

Page 5.2 All3/4"and1"raisesavailable.

Options

Page 5.9-5.16 Pegs,distressing,crossgrainsanding,radiuscorners,wearsanding,putty pin holes, cut down in width only.

11.4

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts

Conestoga Wood Specialties Corporation Summer 2011

Valance Matrix Instructions

Usematricesonthefollowingpagestodeterminethespecificationsforapatternedvalance.Findthe desired valance length in one of the C rows. The top number (white numbers in a black box) in the column with the desired length is the pattern length. The pattern will be centered on the valance.FromtheCblockcontainingthedesiredvalancelength,theextremerightnumberinthatrow,which is under column B, is the size of the non-patterned area on the left and right side of the pattern. Example:Iforderingatraditionalvalancewithanoveralllengthof30"(dimensionC),itcanbe seenthat:•30" appears in the sixth C row, fourth column of the Matrix. •Referringtothetopofthecolumn,inrowA,apatternlengthof19" will be found.

Classic ArchValances21"to60"

Valances60-1/16"to96"

Traditional ArchValances16"to60"


Custom Valances (continued)

Valancesareavailableina6"widthonly.Valance pricing is determined using design plus material calculations. See the drawings below todetermineappropriatedesigncharge.CalculateoverallsquarefootageofvalancesandrefertocategoryBofthespeciedesiredintheMaterialPricingGuidetodeterminematerialcharge.

Edge Profile Options

•Straightvalancecomesstandardwithmachineedge,butisavailablewithanyedgeprofile.Specify which sides receive an edge profile.

•RomanArchvalanceandTraditionalArchvalancecomesstandardwithmachineedge. These valances are available with a variety of edge profiles; contact Special Designs for options and availability.

•ClassicArchvalanceandElegantArchvalanceareonlyavailablewithamachineedge.

StraightValances12"to60"


Elegant ArchValances21"to60"


Roman Arch Valances12"to60"


11.5

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts

Spring 2012 Conestoga Wood Specialties Corporation

Classic Arch

B BA

6"

C

2-1/2"

Elegant Arch

B BA

6"

C

3"

Roman Valance

B BA

6"

3"

C

Traditional Arch

B BA

6"

C

3"

Custom Valances (continued)

•Referring back to the 30" C row, at the right end of the row, in column B, a straight, non-patterned run of 5-1/2" on both the left and right ends of the valance will be found.

•The selected 30" valance will have a pattern 19" wide, centered on the valance, with 5-1/2" wide non-pattern areas at both ends of the valance.

Valance Matrix

A = Pattern length B = Straight run on left and right ends C = Overall length

A 9" 11" 14" 19" 24" 30" 42" 54" 66" 78" B

C 15" 17" 3"

C 16" 18" 21" 26" 31" 37" 49" 61" 73" 85" 3-1/2"

C 19" 22" 27" 32" 38" 50" 62" 74" 86" 4"

C 20" 23" 28" 33" 39" 51" 63" 75" 87" 4-1/2"

C 24" 29" 34" 40" 52" 64" 76" 88" 5"

C 25" 30" 35" 41" 53" 65" 77" 89" 5-1/2"

C 36" 42" 54" 66" 78" 90" 6"

C 43" 55" 67" 79" 91" 6-1/2"

C 44" 56" 68" 80" 92" 7"

C 45" 57" 69" 81" 93" 7-1/2"

C 46" 58" 70" 82" 94" 8"

C 47" 59" 71" 83" 95" 8-1/2"

C 48" 60" 72" 84" 96" 9"

11.6

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts

Conestoga Wood Specialties Corporation Spring 2012

11.6A

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts


2-5/16"

2-5/16"

1" 1"

2-5/16"

2-5/16"

1" 1"

CRP-10 Pilaster Door

5-3/4" x 7-3/8"Slant raise shown

TW-10 Pilaster Door

3-3/4" x 5"1/4" veneered panel

Offering and Availability

All Conestoga products are available in a wide variety of specifications to satisfy your custom needs. The information below indicates any exceptions or limitations pertaining to the designs above. For a detailed listing of a particular product specification, refer to the page indicated.

Species

Material Pricing Guide All 3/4" species available in CRP-10. TW-10 – all 3/4" species available except Soft Maple and Rustic Knotty.

Edge Profiles

Page 5.1 Standard as shown, no options available (machine edge only).

Framing Beads

Page 5.2 All 3/4" available.

Panel Raises

Page 5.2 All 3/4" available on CRP-10. 1/4" veneered panel only on TW-10.

Options

Pages 5.9-5.16 Available with pegs, cut-downs, distressing, cross grain sanding, antiquing, non-standard width framing, putty pin holes, camelot rout, face-routed and back-routed handpull and panel grooving. G-121 panel groove is not valid on TW-10 design.

All plywood panel designs use a 1/4" veneered, composite core panel. All panels except White Birch use plain sliced face or half round face and rotary back veneer. White Birch uses a rotary face and back. Vertical grain direction standard unless otherwise noted; horizontal grain available upon request. Minimums listed are based on panel raise shown and will vary by raise; see Offering and Availability for additional options. Framing width listed is determined by measuring across the back of the framing unless otherwise noted.

CRP-10 and TW-10 Pilaster Doors

2-5/16"

2-5/16"

1" 1"

2-5/16"

2-5/16"

1" 1"

11.6B

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts


Slab Fillers

•Slab fillers can be ordered in widths from 1-1/2" to 22-1/2" and lengths from 4-1/2" to 96". Available in all 3/4" and 1" species including MDF.

•All 3/4" and 1" edge profiles are available.•Slab fillers are available with pegs, radius corners, grooves, face-routed

and back-routed hand pull, distressing and wear sanding.•Lead-time 10 days; add 5-6 days for finishing.

Slab Filler

**See the one piece design pricing chart below for additional pricing information.

11.7

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts


Fluted Fillers

•Flutedfillerscanbeorderedincustomwidthsfrom3"to15-15/16"inallstandardspecieofferings including MDF.

•ChoosefromeitherTaperedorRoundedflutes.Ifnotspecified,fluteswillbeproducedusingtheTapered design.

Rounded Flute

Tapered Flute

Edge Profile Options

•FlutedfillerscomestandardwithaMachineEdge,butcanbe ordered with a variety of edge profiles including B-2, C-2, LC-2, L-059, L-061, L-149, PRS-2, V-2 and L-686.

•BevelededgeprofileselectionsincludetheL-991(45degreeback bevel) and the L-423 (22-1/2 degree back bevel).

•PremiumedgeprofilesincludetheL-297,L-304and LC-Insetedge.Upchargeapplies.

•Non-flutedor“flat”areasarestandardasshown,butcanbe customized to meet your design needs. Simply specify theflatdimensionsdesired.Specify“Flatstomeasure0”toextend flutes the entire length of filler.

•Flutedfillerpricingisdeterminedusingdesignplusmaterialcalculations. See the chart below to determine appropriate design charge. Calculate overall square footage of filler and refer to category B of the specie desired in the Material Pricing Guide to determine material charge.

•Thenumberofflutesperfillerwidthisindicatedinthechart below. Custom flute spacing is available through Special Designs.

2"

2" 2"

6" 6"

2"

2" 2"

Section view

Wall

Base/Tall

variable

3/4"

7/16"

3/8"

11.8

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts


3" and 6" Fluted Fillers with Rosette

Fluted fillers with rosettes can be ordered in a tapered or rounded flute design. Flutes will be manufacturedas“taperedflute”unlessotherwisespecified.

Section view of rosette

•Fluted filler with rosette pricing is determined using design plus material calculations. See the chart above to determine appropriate design charge. Calculate overall square footage of filler and refer to category B of the specie desired in the Material Pricing Guide to determine material charge.

•Top margin on rosette filler is standard as shown, custom margins are available through Special Designs.

•Rosettes may be added to the bottom of these fillers. The position of the bottom rosette will mirror the placement of the top rosette.

•Standard measurements for Wall and Base/Tall fluted fillers are identical with the exception of the length of the unfluted area on the bottom. Wall fillers are manufactured with a 2" unfluted area, Base/Tall fillers are manufactured with a 6" unfluted area.

•Flat dimensions (length of unfluted area) at ends of fillers are standard as shown. Specify custom flatdimensionsifdesired.Specify“Flatstomeasure0”toorderflutesextendingtheentirelengthofthe filler on the bottom only. Top flat may not measure less than 3-3/8".

•Lead-time 10 days unfinished; add 5-6 days for finishing.

Section viewTypical for all 6" wide fillers

Section viewTypical for all 3" wide fillers

3/4"

7/16"

3/8"

1/2"

2-1/4"

1-1/4"

6"(Base/Tall)

4-1/8"

2"(Wall)

1-1/4"

6"(Base/Tall)

2-1/4"

6"3"

1-1/4"

2-15/16"3-1/2"

4-1/8"2-1/4"

6"

2-1/4"

3"

1-1/4"

3-3/4"

2"(Wall)

4-1/8"

6"(Base/Tall)

2"(Wall) 6"(Base/Tall)

4-1/8"

2"(Wall)

Straight Staggered

3/4"

6"

2-1/4"

25/32"

3/4"

7/16"

3/8"

11.8A

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts


CRP-10 Pilaster Posts5-3/4" x 7-3/8"Slant raise shown

Species

Material Pricing Guide All 3/4" species available in CRP-10. TW-10 - all 3/4" species available except Soft Maple and Rustic Knotty.

Edge Profiles

Page 5.1 Standard as shown, no options available.

Framing Beads

Page 5.2 All 3/4" available.

Panel Raises

Page 5.2 All 3/4" available on CRP-10. 1/4" veneered panel only on TW-10.

Options

Pages 5.9-5.16 Available with pegs, panel grooves, distressing, cross grain sanding, antiquing, non-standard width framing and finishing. G-121 panel groove is not valid on TW-10 design.

CRP-10 and TW-10 Pilaster Posts

•Standardframingwidths:1-1/2"stiles,2-5/16" rails and 2-1/2" middle rail.

•Postscannotexceed12"x96".•Standardlead-time12days;add5-6days

for finishing.•2-sidedand3-sidedpilasterpostsare

available assembled only.•Loosesideoptionavailableonly

with four sided Pilaster Post; no additional charge. Post will be constructed as an assembled three sided post with the fourth side held in place with loose splines which can be easily removed, then reinserted at the jobsite.

•Duringthefinishingprocessitispossiblethat some finish materials may get on exposed edges. This finishing material should be removed before glue is applied to allow for a proper glue bond.

2-sided 3-sided

(TW-10 shown)

4-sidedNot Glued

Glued Corners

2-5/16" 2-5/16"

2-5/16"

1-1/2" 1-1/2"1-1/2" 1-1/2"

2-5/16"

TW-10 Pilaster Posts4-3/4" x 6-3/8"1/4" veneer panel

2-5/16" 2-5/16"

2-5/16"

1-1/2" 1-1/2"1-1/2" 1-1/2"

2-5/16"

Minimums listed are based on panel raise shown and will vary by raise.

2-sided 3-sided

(TW-10 shown)

4-sidedNot Glued

Glued Corners

Loose side option

11.8B

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts


11.9

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts

Winter 2014 Conestoga Wood Specialties Corporation

Front Frame Specifications

•Doubledowelconstructiononstandardwidthframing.•Materialwillbestandardgradeunlesspremiumisnoted.Premiumgradeavailable,upcharges

apply.•Standardframingwidthis1-1/2",additionalwidthsavailable,upchargesapply.•3/4"framingthicknessstandard,1"thickmaterialisavailable,upchargesapply.•Minimumframingwidth3/4";15/16"forfrontframeswithanedgeprofile.•Materialsurfacedfoursides.•Assembledframessandedonfrontonlywith220gritpaper.•Maximumfrontframesizesare96"inonedirectionand48"intheotherdirection.Forexample,

afrontframecanbeordered36"Wx96"Hor96"Wx36"Hbutnot96"Wx96"H.•Framingwiderthan4-1/2"mayhaveonegluejoint.Framingwiderthan6-1/2"mayhavetwo

gluejoints.•Minimumglue-intrimmableinsertwidthis1/2";maximumglue-intrimmableinsertwidthis3".

Front Frame Tolerances

•Atoleranceof+/-1/32"isconsideredacceptableonfrontframeexteriorandinterioropeningdimensions.

•Atoleranceof+/-1/32"outofsquareisconsideredacceptableonfrontframesunder12squarefeet.

•Atoleranceof+/-1/16"outofsquareisconsideredacceptableonfrontframes12squarefeetandover.

•1/32"offsetonframebackatanyjointisconsideredacceptable.•1/64"offsetatanyexteriorjointontheoutsideperimeterisconsideredacceptable.

Front Frame Ordering Information

•Conestoga’scustomfrontframescanbeorderedas1/4"beaded,3/8"beadedornon-beaded.Tospecify,checktheappropriateboxinthebeadedareaoftheorderform.

•Frontframeexteriordimensions,interioropeningdimensionsandframingwidthscanbeorderedtothenearest1/16".

•Onbeadedorders,customersmayselectspecificopeningstobe“non-beaded”byspecifyingtheopeningletterdesignation.Example:“DonotbeadopeningS.”

•WhenorderingcustomfrontframesforConestogaCabinetSystems,allframingandopeningsizesmustbespecifiedbythecustomer.Onlystandardgroovelocationsavailable.

•ContactyourCustomerServiceorSalesRepresentativeforfrontframeconfigurationtemplates.Allfrontframesmustbeorderedusingthesetemplates.

1/4"Bead 3/8"Bead Ogee V-BeadNon-beaded

11.10

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts

Conestoga Wood Specialties Corporation Winter 2014

11.11

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts


Inset Door and Drawer Front Information

•Thefollowingedgeprofileoptionsarerecommendedforusewithinsetdoorsanddrawerfronts.•Theseedgeshavea5degreebackbeveledgetoensuresufficientdoorclearance.Machineedgeis

availableuponrequestatnoadditionalupcharge.

Standard Lip Options

L-253L-149 L-686 L-947

•Frontframesorderedwithinsetdoorsanddrawerfrontswillbepre-fittotheopeningsize.A3/32"marginwillbeusedonallsidesforsingledoorsanddrawerfrontsandbetweenbuttdoorpairs.

Design Exceptions

•Thefollowingdooranddrawerfrontstylesarenotavailableforinsetapplicationsduetotheiruniquedesigncharacteristics:Astoria,CRP-1420,CRP-10191,CRP-10318,CRP-10334, CRP-10827,CRP-10875,CRP-10946,DVGBatten,Fairhaven,FlushBatten,Gainsborough,LaSalle,Milan,Prestige,Royal,Savoy,TW-10318,TW-10827,10946,V-200andWindham.*Recessedpaneldoorsanddrawerfrontsintheabovedesignsarenotavailableforinsetapplications.

•Thefollowingedgeprofileoptionsarenotavailableforinsetapplications: B,B-2,C,C-2,CFP-2,E-2,FEP,FP,H,H-2,J-2,L-034,L-059,L-061,L-120,L-281,L-772,

L-803,LC-2,PRS-2,RC-2andV-2.•Openingswithtrimmableinsertsarenotavailablebeaded.• InsetdoorsanddrawerfrontsarenotavailableinMDFproducts.•Finishedfrontframesarenotavailablewithantiquingorwearsanding.•Distressedfrontframeswillreceiveamodifieddistressingpackage.

L-304 L-996

Premium Prefit/Inset Edge Profiles

additionalchargeperdoor.These two profiles require 2 additional working days.

L-967 L-1117 L-1120

11.12

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts


Inset Door and Drawer Front Information (continued)

1/8", 1/4" and 3/4" Plywood Program

•1/8"thicksheetstockwithGradeAfaceveneerappliedoverplywoodcorewithsoundback.•1/4"thicksheetstockwithGradeAfaceandbackveneersappliedoverMDFcore.•3/4"thicksheetstockwithGradeAfaceveneerappliedoverplywoodcorewithprefinished

naturalBirchback,exceptwhereotherwisenoted.•All1/8",1/4"and3/4"sheetstockisavailableinfull4'x8'sheetsexceptKnottyPinesheets

are47-1/2"x86"andBamboosheetsare48"x92".Allsheetstockisalsoavailableas cut-to-sizepanels.

•PlywoodfinishedinColourtonesmayhavepinmarksandscratchesfromdryingracks,veneerchecks,seamseparation,glazesmudges,fingerprints,oversprayandsomedirtintopcoat.Suchdefectswillbekepttoaminimum,butareunavoidablewhenfinishinglargepartsandwillnotbeconsidereddefective.Edgeswillnotbefinished,unlessedgebandinghasbeenapplied.

•Lead-time4daysunfinished;add5-6daysforfinishing.• AdditionalsheetstockisavailablethroughSpecialDesignsincommonspecies,gradesandthicknessin

singlesheetminimums.Specifythickness,coretype,specie(faceandback),veneergrade(faceandback)andveneercut(faceandback).Lead-timesandpricingaresubjecttoavailability.

• Oversizedpackagingchargeperitemappliesforlargecut-to-sizepiecesorfull4'x8'sheetsof1/4"or3/4"material.Oversizepackagingparametersandconditionsapplywhenthesizeexceeds35"wideand35"long,thesizeexceeds48"wideor85"long,oracustomerrequestsoversizepackaging.

•CustomfrontframesthatareorderedwithColourtonesandglazeswillreceivethesamehandglazedfinishesasdoors.CabinetSystemspartsthatareorderedwithColourtonesandglazeswillcontinuetobefinishedwiththespecialColourtonesthathavebeentintedtomatchtheColourtonesandglazecombination.Theywillnotreceiveahandrubbedglaze.Someoptions,suchasHeirloomandBrushedglazesthatareavailableonCustomfrontframesarenotavailableonCabinetSystemsparts.

Miter/Inset Combination Not Recommended

Miterdoorsanddrawerfrontsarenotrecommendedforinsetapplicationsforthefollowingreasons:•Miter lines may not intersect door corner after pre-fit sanding.Notconsideredadefectby

Conestoga,thisconditionmaynotbevisuallypleasingtosomecustomers.•Panel expansion caused by high humidity may cause miter doors to bind inside frame

openings.AlthoughConestoga’smiterdoorjointconstructionisoneoftheindustry’smostdurable,highhumiditywillcausepanelexpansion.Theresultingpressurecanpushthemitereddoorframingoutwardagainsttheframeopenings.

• Ifamiterdesignisnecessary,ConestogarecommendsspecifyingaplywoodorMDFcenterpanel.SeeapplicablespecificationsintheCustomProductsManualforfurtherinformation.

11.13

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts


Options

• Cut-to-sizecharge. ❖ Whenorderingcut-to-sizeplywood,specify widthandheight.

• EdgebandingCharges(3/4"plywoodonly): ❖ .5mmwoodbanding1to4edges. ❖ 3mmwoodbanding1to4edges. ❖ Foredgebandingonspecificedgesorcut-to-sizeplywood,specifyedgesasfollows:top,bottom,left,rightoralledges.

• Groovingavailable(1/4"materialonly). ❖ G-012,G-015orG-056grooveprofiles. ❖ Spacingavailablein1/2"increments startingat1/2"upto4".

• PanelGroovingcharges(perpanel): ❖ Upto24"wideand48"orunderinlength. ❖ Upto24"wideandover48"inlength. ❖ Over24"wideand48"orunderinlength. ❖ Over24"wideandover48"inlength.

• Edgebandingandgroovingoptionseachadd1additionaldaytothelead-time.

• Cut-to-sizeorfullsheetsofplywoodareavailableunfinishedorfinished;seeSolidWoodFinishingProgramsectionforfinishoptionsandpricing.

• ColourtonefinishesareavailableonCherry,HardMaple,WhiteBirchandRedOakplywoodonly.

1/8", 1/4" and 3/4" Plywood Program (continued)

3/4" Plywood Panel Program

Specie (Face/Back)Material Charge

Design Charge Specie (Face/Back)

Material Charge

Design Charge

Alder/NaturalBirch Maple,Hard/Maple,Hard

CaramelizedBamboo/Bamboo*(MDFcore) Maple,Hard/NaturalBirch

Cherry/Cherry RedOak/RedOak*

Cherry/NaturalBirch Wenge/Wenge*(MDFcore)

Lyptus/NaturalBirch Zebrawood/Zebrawood*(MDFcore)

*Availablewith.5mmedgebandingonly.

1/4" Plywood Panel Program

SpecieMaterial Charge

Design Charge

Alder

Birch,Red

Birch,White

CaramelizedBamboo

Cherry

Maple,Hard

MDF(Raw)

Hickory

KnottyPine

Lyptus

QuarterSawnRedOak

QuarterSawnWhiteOak

RedOak

WhiteOak

Walnut

1/8" Plywood Panel ProgramSpecie Material Charge Design Charge

Cherry

Maple,Hard

11.14

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts


1/4" Solid Refacer’s Program

•Solid1/4"thickmouldingisdesignedtobeappliedoverthefaceframesofexistingcabinetryinfieldrefacingapplications.

•Moulding2073isavailablein1/16"widthincrementsfrom1"to6"widex96"long.•Variablewidthrefacer’smouldingisavailableinprimegradematerial.Sizesshowninthe

tablebelowarefor1/4"thick“surfacedfoursides”(S4S)squarestock.Materialmouldedand sanded.

•Availablefinishedorunfinished.Iffinishoptionischosen,mouldingwillbefinishedonfaceandtwoedgesonly.

Ordering and Sizing Specifications

•Mouldingiscategorizedandpricedbywidth.Mouldingwidthreferstothesmallestwhole-inchdimensionoftherefacingsegmentrequired.Ifthemouldingis1.01"wide,theappropriatepricingwillbelocatedinthe2"column.Thisruleistypicalinallsizes.

•Mouldingwiderthan5-1/16"mayhaveonegluejointrunningtheentirelength.

1/4" Thick Solid Refacing Moulding Pricing8'ChoiceGrade7-12daylead-time

Specie

Moulding Width

1" 2" 3" 4" 5" 6"

Alder

Bamboo

Cherry

HardMaple

Lyptus

PaintGrade

PecanHickory

Pine

RedBirch

RedOak

SoftMaple

Walnut

WhiteBirch

1/4" Short Grain Plywood Program

•96"x48"panelforislandbackorwallpanelapplications.•Grainrunsverticallyinthe48"direction.•1/4"thickmaterialwithGradeAfaceveneersappliedover

MDFcorewithsoundback.•Availableunfinishedorfinished;seeSolidWoodFinishing

Programsectionforfinishoptionsandpricing.•Lead-time3daysunfinished;add5-6daysforfinishing.•Oversizepackagingfeeapplies.

Cherry

Maple,Hard

1/4" x 96" x 48" PlywoodShort Grain Panel

Specie Price

11.14A

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts


Veneers

•Allveneersareapproximately1/32"thickandhaverealwoodfaces.•Oneendandonesideofanyveneersheetisguaranteedtobefreefromphysicaldamage.•Woodbackveneershaveacrossgrainwoodbackerwhichallowstrimedgestobestainedand

finishedtoreduce“blackline”effect.•Polybackveneersareappliedtoapolymerresinimpregnatedmembrane.Theycontainnoadded

ureaformaldehyde(NAUF),arerigidyetpliableandprovideexcellentmoistureresistance.•Woodbackandpolybackveneersareavailablewiththeirapplicablebackerorapressuresensitive

adhesive(PSA).PSAveneershaveapre-gluedadhesivelayerprotectedbyapeelcoatcoveringthatmustberemovedpriortoapplication.

•Veneersarenotguaranteedtoperfectlymatchsolidwooddoors.Veneerisslicedfrompremiummaterial;colorandgrainmatchwillbemoreuniformthansolidwooddoors.Hickoryveneersmaycontainmineralstreaksandpeckmarks.

•Propersurfaceconditionsandpreparationisessentialtosuccessfulapplicationandperformanceofveneeredsurfaces.

❖ Permanufacturer’srecommendations,veneersofallbackertypesshouldbeplacedflatandallowedtoacclimate48hoursbeforeinstallation.

❖ Pressuresensitiveveneersshouldnotbeappliedtobarewoodorsurfacescoveredwithsandingsealers,highpressurelaminates,melamineorotherplasticmaterials.

❖ Woodbackandpolybackveneersarebestappliedwithrollergradeadhesives.Sufficientadhesivecoverageonboththeveneerandsubstratesurfacewillensureproperadhesion andperformance.

•Conestogaisnotliableforproductfailureduetoimpropersurfacepreparation,adhesiveselectionorinstallationtechnique.

•Finishingoptionavailable. Stainedveneersmayvaryslightly incolorfromsolidwoodproducts ofthesamespecie.Finishingadds 5-6daystostandardlead-time.

•Conestoga does not accept returnsonveneers.

Wood VeneerDouble Glue PaperWood Back(cross grain)

Wood VeneerWood Back (cross grain)Pre-gluedAdhesivePeel AwayCovering

Wood Veneer

Poly Backer Pre-gluedAdhesivePeel AwayCovering

Wood VeneerDouble GluePaperPoly Backer



Wood Veneer



*AvailablewithColourtonefinishes.+WhenorderedwithColourtonefinishes,phenolicbackveneerswillbesubstituted.



Wood Veneer



Poly Back

24" x 96" 48-1/2" x 97"

Specie PSA Wood Back PSA Poly Back Wood* Back Poly Back

Alder

Anigre

Bamboo

Birch,Red

Birch,White

BirdseyeMaple

Cherry

Hickory

Lyptus

MacassarEbony

Maple,Hard

Oak,Red

Oak,White

Pine,Knotty

QuarterSawnWhiteOak

Walnut

Wenge

Zebrawood

Stockitem3dayleadtime. Customitem10dayleadtime.



Wood Veneer



PSA Wood Back

PSA Poly Back

Wood Back

11.14B

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts


500' Wood EdgebandingSpecie Price Specie Price

Alder MacassarEbony

Anigre Pine

Bamboo RedOak

BirdseyeMaple Walnut

Cherry Wenge

HardMaple WhiteBirch

Hickory WhiteOak

Lyptus Zebrawood

Wood Edgebanding Program

Conestogaoffers7/8"widex250'or500'rollsof.5mmwood edgebandingtocompleteyourpanelprocessingrequirements.See pricingchartsbelowforspecieavailability.

•Realwoodveneerappliedtoanungluedfleecebacker.•Edgebandingisnotguaranteedtoperfectlymatch

solidwooddoorsorsheetstock.Veneeredgebanding isslicedfrompremiummaterial;colorandgrain matchwillbemoreuniformthansolidwooddoors.

•Edgebandingwillcontainmultiplesplicejointswhich willnotbeconsideredadefect.

•Conestogaisnotliableforproductfailuredueto impropersurfacepreparation,adhesiveselectionor installationtechnique.

•AllConestogafinishingoptionsareavailableasoutlinedintheSolidWoodFinishingProgramsectionofthismanual.

•Lead-time10daysunfinished;add5-6daysforfinishing.Expeditelead-timesnotavailable.•Conestogadoesnotacceptreturnsoffinishededgebanding.

Priceperroll,unfinished;seetheSolidWoodFinishingProgramtabforfinishpricing.

250' Wood EdgebandingSpecie Price

Cherry

HardMaple

11.15

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts


Select Range Hood

•Hoodmustbesecuredtoadjacentcabinets.•Manufacturedfromsolidwoodandwood

veneers.• Includes24gaugesilvermetallicliner.•LineraccommodatesthefollowingBroan

ventilators: 250CFM-RHVBF10SM 390CFM-RHVBB20SMContactOmegaNationalProducts:(800)533-8809.

•Lead-time8daysunfinished,add5-6daysforfinishing.

•Customsizesnotavailable.

Entry Level Range Hoods

Batten Select Range Hood

•Hoodmustbesecuredtoadjacentcabinets.•Manufacturedfromsolidwoodandwood

veneers.•Galleyrailpackageincluded.• Includes24gaugesilvermetallicliner.•LineraccommodatesthefollowingBroan

ventilators: 250CFM-RHVBF10SM 390CFM-RHVBB20SMContactOmegaNationalProducts:(800)533-8809.



24"

3/4"8"

30", 36"

4-3/16"

UnfinishedPrice

Specie 30" 36"

Alder

Cherry

HardMaple

RedOak

UnfinishedPrice

Specie 30" 36"

Alder

Cherry

HardMaple

RedOak

24"

6"

3/4"6.83"

30", 36"

11.16

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts


Range Hoods

46"

38-5/16", 44-5/16", 50-5/16"20-1/16"

19" 36", 42", 48"6"

12"Trimmable

17", 23", 29"9-1/2"

Artisan Range Hood

•Completeturnkeysolutionwithpatentedhangingcleatforquickandeasyinstallation.

•Manufacturedfromsolidwoodandwoodveneers.• Includeschimney,allows12"tobetrimmed.• Includessilvermetallicpowder-coatedliner.• LineraccommodatesthefollowingBroanventilators:

250CFM-RHVBF10SM 390CFM-RHVBB20SM 500CFM-RHVBB30SS 1100CFM-RHVBHLB11ContactOmegaNationalProducts:(800)533-8809.



Euro Range Hood

•Contemporarywall-mountedhoodwithpatentedhangingcleatforquickandeasyinstallation.

•Manufacturedfromsolidwoodandplywood.• Includes23-1/2"trimmablechimney.• Includessilvermetallicpowder-coatedliner.• LineraccommodatesthefollowingBroanventilators:

250CFM-RHVBF10SM 390CFM-RHVBB20SM 500CFM-RHVBB30SS 1100CFM-RHVBHLB11ContactOmegaNationalProducts:(800)533-8809.



UnfinishedPrice

Specie 36" 42" 48"

Cherry

HardMaple

RedOak

UnfinishedPrice

Specie 30" 36" 42"

Cherry

HardMaple

16-1/2"

23-1/2"

30", 36", 4

2"

19"

9-11/16"

11-3/8", 17-3/8", 23-3/8"

11.17

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts


Stanisci Design Range Hoods

StanisciDesignisaleadingrangehoodmanufacturerforthecustomkitchenindustry.Thisprogramallowsforconvenientorderingofcustomrangehoodsandventilationunits.Conestoga’spublishedofferingincludesseveralpopularhooddesignswithpanelraiseandbeadoptions.Bothplywoodandraisedpanelhoodsareavailableinawidevarietyofheightsandwidths.Customsizingalsoavailable.

Program Details

•Rangehoodsareavailableunfinishedorfinished;seeSolidWoodFinishingProgramsectionforfinishoptionsandpricing.

•Pre-finishedhoodswillshipfromConestoga’sKenly,N.C.facility.•CustomspeciesincludeEuropeanSteamedBeech,QuarterSawnWhiteOak,RedBirchand

RusticKnottyAlder.•Customsizesanddesignsareavailable.ContactSpecialDesignsforaquote. Examplesofcustomdesigns:

•Linersarenotincludedwithhoodunlessotherwisenoted.StainlesssteelventilationunitsandlinersareavailablefromStanisciDesignwithdiscountedConestogaprogrampricing.ContactStanisciDesignat(586)752-3368.

•Recommendedventilator:Stainlesssteelunitsfrom350to1500CFMareavailablethroughStanisciDesign(586)752-3368.

•Staniscihoodsareavailableincatalogformat,compatiblewith20-20Designsoftware.ContactyourSalesRepresentativeforinformation.

PLEASE NOTE: All Stanisci Range Hoods should be mounted no closer than 30" above cook tops, although some cook tops require additional clearance. Please check local building codes and appliance specifications.

Hood shown with bead board option

Hood shown with decorative moulding

Removable panel

Removable Applied Panel Option

•AvailableonG,GRA,JRA,T,TRAandI-Serieshoods.

•Allowsforeasyinstallationandaccessbybuildinginspectors.

•Panelfeaturesappliedmouldingforfinishedlookafterinstallation.

•Noadditionallead-timerequired.•Whenorderingspecifythehooddesignthen

“RemovableAppliedPanelOption”.

Hood shown with integrated corbels

Hood shown with single panel valance

11.18

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts


No Fixed Top Rail Removable Panel (NTRRP) Option

WhentheremovableappliedpaneloptionischosenwithW,H,QandMserieshoods,thestandardconstructionmethodincludesafixedtoprailandremovablepanelthatextendsfromthefixedtoprailtothetopofthedisplayshelf.This2"fixedtoprailacceptsacrownmouldingintypical applications.

Anoptionisavailableifacontinuousremovablepanelwithnovisibleseamsisrequired.TheNoFixedTopRailRemovablePaneloption(NTRRP)mustbespecifiedwhenplacingtheorder.

•AvailableonlywithW,H,QandMserieshoods.•Specify“Nofixedtoprail”or“NTRRP”toreceivethisoption.•Refertothechartsonthefollowingpagesforspecieandsizeavailability.•Noadditionallead-timerequired.•NoadditionalchargefortheNTRRPoption.

No fixed top rail option

Standard construction with fixed top rail

11.19

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts


Stanisci Design Range Hoods (continued)

16"

42"

8"

18"

12"15-1/2"

23-3/8"To tip of moulding

12"15-1/2"

16"

42"

8"

18"

23-3/8"To tip of moulding

1-1/2"

VCHIM Series Hood – Straight Valance

•Stylishstraightvalancecomplementstraditionalorcontemporarydesigns.

•Designedtofituptoa9footceiling.•Plywoodchimneyandupper.Solidwoodapron.•18"chimneycanbetrimmedtodesiredheightandis

shippedunattached.•Lead-time5daysunfinished,add7daysforfinishing.•Fixedpanelstandard–removablepanelnotavailable.•VentilatorsavailablethroughStanisci

DesignwithspecialConestogadiscount.•Custom sizes not available.

VCHIM Series Hood – Arched Valance

•Stylisharchedvalancecomplementstraditionaldesigns.•Archedvalancehasregularbead,G-CoveRaise-

no options.•Designedtofituptoa9footceiling.•18"plywoodchimneycanbetrimmedtodesiredheight

andisshippedunattached.•Lead-time5daysunfinished,add7daysforfinishing.•Fixedpanelstandard–removablepanelnotavailable.•VentilatorsavailablethroughStanisci

DesignwithspecialConestogadiscount.•Custom sizes not available.

Add2-1/4"towidthlistedinpricingchartforactualoverallwidthincludingtrimmoulding.

Alder

Cherry

HardMaple

RedOak

Part Number

Specie SV-30x42 SV-36x42 SV-42x42 SV-48x42


Alder

Cherry

HardMaple

RedOak

Part Number

Specie AV-30x42 AV-36x42 AV-42x42 AV-48x42

11.20

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts


13-11/16"30"

7-11/16"

8-5/8"

23-3/8"

12"

To tip of moulding

13-11/16" 32"

10-5/16"

23-3/8"

8"

To tip of moulding

12"

2-1/2"

Stanisci Design Range Hoods – G-Series

G-Standard Hood

• G-Seriesisdesignedtobestfit8footceilings.• Removablechimneymaybetrimmedtodesired

height.• Lead-time10daysunfinished,add7daysfor

finishing.•Fixedpanelstandard-availablewith

removablepaneloption.•Custom sizes available through

Special Designs.

G-Raised Arch Hood

• G-RaisedArchSeriesisdesignedtobestfit 8footceilings.

• Profileoptions- FramingBead:Regular, OgeeorSquare. PanelRaise:Slant,G-Cove, RM,M-BeadorP-057.

• Removablechimneymaybetrimmedto desiredheight.

• Lead-time10daysunfinished,add7days forfinishing.

•Fixedpanelstandard-availablewith removablepaneloption.

•Custom sizes available through Special Designs.



Alder

Cherry

HardMaple

RedOak

Part Number

Specie G-36 G-42 G-48 G-54 G-60

Alder

Cherry

HardMaple

RedOak

Part Number

Specie GRA-36 GRA-42 GRA-48 GRA-54 GRA-60

11.21

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts


17-1/8"

14-1/4"

42"

10-5/8"

23-3/8"

To tip of moulding

12"

12"

17-1/8"42"

14-9/16"

10-5/16"

To tip of moulding

23-3/8"

2-1/2"

Stanisci Design Range Hoods – T-Series

T-Standard Hood

• T-Seriesisdesignedtobestfit9footceilingsandtaller.• Removablechimneymaybetrimmedtodesiredheight.• Lead-time10daysunfinished,add7daysforfinishing.•Fixedpanelstandard-availablewithremovable

panel option.•Custom sizes available through Special Designs.

T-Raised Arch Hood

• T-RaisedArchSeriesisdesignedtobestfit9footceilingsand taller.

• Profileoptions- FramingBead:Regular, OgeeorSquare. PanelRaise:Slant,G-Cove, RM,M-BeadorP-057.

• Removablechimneymaybetrimmedtodesiredheight.• Lead-time10daysunfinished,add7days

forfinishing.•Fixedpanelstandard-availablewith

removablepaneloption.•Custom sizes available through

Special Designs.



Alder

Cherry

HardMaple

RedOak

Part Number

Specie T-36 T-42 T-48 T-54 T-60

Alder

Cherry

HardMaple

RedOak

Part Number

Specie TRA-36 TRA-42 TRA-48 TRA-54 TRA-60

11.22

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts


22-1/4"

6"

2"M-Series Hood w/Display Shelf

•Profileoptions- FramingBead:Regular,OgeeorSquare. PanelRaise:Slant,G-Cove,RM, M-BeadorP-057.

•Willaccommodatecorbelsupto5"wide,10-1/2"highand6"deepunderdisplayshelf.SeetheWoodAccentsandOrnamentpagesinsection12ortheEnkebollsupplementbooklet.

•Hoodincludesdisplayshelf,shippedunattached.•Lead-time10daysunfinished,add7daysforfinishing.•Removablepanelandfixedtoprailstandard-mustrequest

fixedpanel,and/ornotoprail,removablepanel(NTRRP).•Custom sizes available through Special Designs.

6-3/4"deepdisplayshelfincluded.

Alder

Cherry

HardMaple

RedOak

Part Number

Specie M-30x24 M-36x24 M-42x24 M-48x24 M-54x24 M-60x24 M-30x30 M-36x30 M-42x30 M-48x30

Alder

Cherry

HardMaple

RedOak



Alder

Cherry

HardMaple

RedOak


11.23

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts


22-1/4"

13-1/2"

5"

2"


3"

2-1/2"

Variable

10-5/16"

11-3/8"

12"

To tip of moulding

J-Raised Arch Hood

• J-RaisedArchisdesignedtobemountedbetweenleftandrightcabinets.

• Hoodcanbesizedtobestfit8or9footceilings.

• ProfileOptions- FramingBead:Regular,OgeeorSquare. PanelRaise:Slant,G-Cove,RM, M-BeadorP-057.

• Lead-time10daysunfinished,add7daysforfinishing.

• Fixedpanelstandard-mustrequestremovable panel option.

• Standardsizes:33",39",45",51",57"and63"widths;30",36"and42"heights.

• Custom sizes available through Special Designs.

Part Number

JRA- JRA- JRA- JRA- JRA- JRA- JRA- JRA- JRA- JRA- JRA- JRA- Specie 33x30 39x30 45x30 51x30 57x30 63x30 33x36 39x36 45x36 51x36 57x36 63x36

Alder

Cherry

HardMaple

RedOak

Q-Standard Hood w/Display Shelf

•Valance/mantlestylehoodisdesignedtobemountedbetweenleftandrightcabinets.

• ProfileOptions- FramingBead:Regular,OgeeorSquare. PanelRaise:Slant,G-Cove,RM, M-BeadorP-057.

•Hoodincludesattachedshelfandshelfsupports.•Lead-time10daysunfinished,add7daysforfinishing.•Removablepanelandfixedtoprailstandard-must

requestfixedpanel,and/ornotoprail,removable panel(NTRRP).

• Standardsizes:30",36",42",48",54"and60"widths;24",30",36",42"and48"heights.

• Custom sizes available through Special Designs.

Part Number

Q- Q- Q- Q- Q- Q- Q- Q- Q- Q- Q- Q- Specie 36x24 42x24 36x30 42x30 48x30 36x36 42x36 48x36 36x42 42x42 48x42 54x42

Alder

Cherry

HardMaple

RedOak

6-3/4"widedisplayshelfandtwosupportsincluded.

11.24

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts



S-Raised Arch Hood w/Display Shelf

•ProfileOptions-FramingBead:Regular,OgeeorSquare. PanelRaise:Slant,G-Cove,RM, M-BeadorP-057.

•Displayshelfdepthis6-1/8"deep.•Lead-time10daysunfinished,add7daysforfinishing.•Removablepanelstandard-fixedpanelnotavailable.• Standardsizes:33",39",45",51",57"and63"widths;

24",30",36"and42"heights.•Custom sizes available through Special Designs.

6-1/8"

1-3/4" 17-1/4"

2-1/2"

10-5/8"

Part Number

SRA- SRA- SRA- SRA- SRA- SRA- SRA- SRA- SRA- SRA- SRA- SRA- Specie 39x24 45x24 51x24 39x30 45x30 51x30 39x36 45x36 51x36 39x42 45x42 51x42

Alder

Cherry

HardMaple

RedOak

H-Raised Arch Hood w/Display Shelf

•Hearthstylehoodfeaturingincorporateddisplayshelf.• Profileoptions- FramingBead:Regular,OgeeorSquare.

PanelRaise:Slant,G-Cove,RM, M-BeadorP-057.

•Displayshelfdepthis8-1/8"totipofmoulding.•54"and60"widehoods–havetwotoppanels.•66"widehoodshavethreepanelsontopwainscot.•Accommodatescorbelsupto9"wide,10-1/2"highand

6-3/4"deep.•Lead-time10daysunfinished,add7daysforfinishing.•Removablepanelandfixedtoprailstandard-mustrequest

fixedpanel,and/ornotoprail,removablepanel(NTRRP).• Standardsizes:54",60"and66"widths;44",50"and

56"heights.• Custom sizes available through Special Designs.

Part Number

HRA- HRA- HRA- HRA- HRA- HRA- HRA- HRA- HRA- Specie 54x44 60x44 66x44 54x50 60x50 66x50 54x56 60x56 66x56

Variable

9"

18-3/4" Pillar

12"

Variable

13-1/2"

2-1/2"

Alder

Cherry

HardMaple

RedOak

11.25

SP

EC

IAL

TY

PR

OD

UC

TS

Custo

m P

rod

ucts



Variable

9"

18-3/4" Pillar

12-3/4"

6"

Variable

Small Panel Pillar

Full panel pillars shown

28"

W-Raised Arch Hood w/Display Shelf

•Profileoptions- FramingBead:Regular, OgeeorSquare. PanelRaise:Slant,G-Cove, RM,M-BeadorP-057.

•Specifyfullpanelorsmallpanelpillars.Smallpanelpillarscanaccommodatecorbelsupto9"wide,10-1/2"highand6"deep.

•30"clearancebetweenbottomofpillarandbottomofarchedpanel.

•Displayshelfdepthis8-1/8"deep.•Shipsinfourpieces,readytoassemble.•SpiceRackPullOutoptionincludes

racksinbothleftandrightpillars; upchargeapplies.

•Spicerackdimensions: 26"highx10-3/4"wide.

•Lead-time10daysunfinished,add 7daysforfinishing.

•Removablepanelandfixedtoprail standard-mustrequestfixedpanel, and/ornotoprail,removablepanel(NTRRP).

•Custom sizes available through Special Designs.

SpiceRackOption(Corbelnotincluded)

Part Number

WRA- WRA- WRA- WRA- WRA- WRA- WRA- WRA- WRA- WRA- WRA- WRA- Specie 66x60 72x60 84x60 90x60 66x72 72x72 84x72 90x72 66x84 72x84 84x84 90x84

Alder

Cherry

HardMaple

RedOak

11.26

SP

EC

IAL

TY

PR

OD

UC

TS

Cus

tom

Pro

duc

ts


10-5/8"

Variable

To tip of moulding

23-3/8"

E-Standard Hood

• E-Seriescanbesizedtofit8or9footceilings.• Lead-time10daysunfinished,add7daysforfinishing.• E-Serieshoodsarenottrimmable.Specificheights

availablethroughSpecialDesigns.•Fixedpanelstandard-removablepanelnotavailable.• Standardsizes:36",42",48",54"and60"widths;

36",42"and48"heights.•Custom sizes available through Special Designs.


Alder

Cherry

HardMaple

RedOak

Part Number

Specie E-36x30 E-42x30 E-48x30

Alder

Cherry

HardMaple

RedOak

Specie E-36x42 E-42x42 E-48x42


11-11/16"

Variable

8-5/8"

26-3/8"

To tip of moulding

14"I-Series (Four-sided Island Hood)

• I-Serieshoodisdesignedtoprovideventilationaboveanisland range.

• OverallheightmustbeprovidedwhenorderingI-series.• Prefinishedhoodswillbefinishedonall4sides.• Includesinstallationhardware.• Lead-time10daysunfinished,add7daysforfinishing.•Fixedpanelstandard-availablewithremovable

panel option.•Custom sizes available through Special Designs.


Alder

Cherry

HardMaple

RedOak

Part Number

Specie I-36 I-42 I-48 I-54 I-60

12.1

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


Decorative Elements and Accents

Conestoga has partnered with leading industry providers of decorative woodcarvings to bring you this inclusive collection. Conestoga’s accessory offering includes a wide variety of corbels, appliqués, legs, columns, corner posts, and other decorative elements. Items ordered from this collection will be consolidated with the rest of your Conestoga products and ship as a complete order.

•Specie availability varies by product and is indicated by the specie pricing listed with each product drawing.

•Because of the various manufacturing and sanding techniques used to produce these decorative products, slight variations in finished appearance may occur. These variations will not be considered defective.

•Due to the size and complexity of design, many of these products utilize edge glued lumber. This may result in grain pattern, wood color and finish variations.

Finishing

Conestoga offers finishing on all of the decorative elements and accents. This allows you to simplify your shop process and purchase accessories along with your finished door order. See the Solid Wood Finishing Program section for available stain, Colourtone and glaze combinations.

12.2

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


Decorative Turning Program

Conestoga’s turning offering features a large collection of columns, table legs, island posts and bun feet. The offering consists of standard products shown on the following pages, as well as the capability to produce a variety of custom turnings. These items may include stair and furniture parts, tall columns and non-standard species.

Standard Offering

•Conestoga’s standard offering of table legs, island posts and bun feet is typically available in five species - Alder, Cherry, Maple, Paint Grade and Red Oak. Depending on the item, Paint Grade may be either unselected Maple or Basswood. If Basswood is not specified, product will be manufactured using unselected Maple. Refer to the each product pricing chart for details.

•The majority of table legs and island posts are available in three options - whole, split and 3/4 round. This allows for consistency within the design of the kitchen or bath while also providing flexibility in the manner in which the legs are used.

• Items can be ordered individually, there are no minimum quantities.•Lead-times for table legs, island posts and bun feet are 7-10 days. Some items can be

expedited; refer to product pricing charts for availability.•Parts must be ordered by part number according to specie and whole, split or 3/4 round.

Custom Offering

•Conestoga’s custom turning program allows you to special order virtually any kind of turned product. These items may include 8 ft. columns, staircase parts or any other custom designed turning you may need. These options also include:

❖ Designs from the standard offering, in species that are not published. ❖ Modifications to legs and columns from the standard offering. ❖ Matching a turning that you may already utilize. ❖ Completely new designs that you have created.

•Orders can be of any quantity, from one piece to 1,000.•Lead-times are dependent on the size of the order and specie requested.

Ordering a Custom Turning

• In order to receive a quote for a custom turning, one of the following items is needed along with a completed quote request form from the opposite page:

❖ An actual hard sample of a turning you would like to have reproduced. ❖ A CAD file of a turning that you have designed. ❖ A detailed sketch of a turning you have designed*.

•You will then be asked to sign-off on the quote so that the production of the order can begin.

•Written customer approval of quote and CAD drawing (if applicable) must be received prior to the production of turning.

Size Restrictions

•Turnings can be made to a maximum diameter of 12".•Minimum height of 2", maximum height of 10'. •Turnings ordered longer than 65" will be manufactured in two pieces and can be joined

together using the included lag bolt. Both pieces will be made from the same blank so grain will match from piece to piece.

*A charge will be incurred for CAD file to be created.

12.3

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


Custom Turning Order Form

Customer Name: ____________________________ Date:_________________

Account Number: ___________________________

Part Number (if applicable): ___________________

Part description: _____________________________

Check One:

__ Designs from the standard offering, in a non-published specie

__ Modifications to legs, posts and feet from the standard offering

__ Matching a unique turning sample

__ Completely new design from sketch

Included with this form:

__ Hard sample to be duplicated

__ CAD file of new design

__ Detailed sketch of new design

__ None (to be checked only when ordering a design from the standard offering in a non-published specie)

Specie ________________________________

Quantity ______________________________

Finish (if applicable) _____________________

Special Instructions

12.4

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


Specie Part No. Whole Split 3/4 Round Cherry* 2650236A Maple 2650237A Paint Grade 2655721A Red Oak 2650238A

3-15/16"

10-5

/16"

35-1

/4"

21"

1-3/4"

3-1/2"

3-1/2"

3-1/2"

1-3/4"

3-1/2"

3-1/2"

1-3/

4"

Greco Roman Plain

10-5

/16"

42"

27-3

/4"

3-15/16"

1-3/4"

3-1/2"

3-1/2"

3-1/2"

1-3/4"

3-1/2"

3-1/2"

1-3/

4"

Greco Roman Plain


3-7/8"

10-1

/4"

35-1

/4"

21-1

/8"

2-1/8"

2-1/

8"

4-1/4"

2-1/8"

4-1/4"

4-1/4"

4-1/4"

4-1/4"

Greco Roman Plain


Table Legs and Decorative Columns


4-5/8"

35-1

/4"

26"

4-5/8"1-3/4"

3-1/2"

3-1/2"

3-1/2"

1-3/4"

3-1/2"

3-1/2"

1-3/

4"

Philmont

*Alder available, price as Cherry.

12.5

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


4-1/4"

4-1/4"

4-1/4"

2-1/8"

3-7/8"

10-1

/4"

35-1

/4"

21-1

/8"

3-15/16"

10-5

/16"

35-1

/4"

21"

3-1/2"

3-1/2" 3-1/2"

1-3/4"

Greco Roman Fluted

Greco Roman Fluted

Specie Part No. Whole Split Cherry* 2650272A Maple 2650273A Paint Grade 2655727A Red Oak 2650274A


5"

5"

5"

2-1/2"

3-13/16"

10-3

/16"

35-1

/4"

21-1

/4"

Greco Roman Fluted


Table Legs and Decorative Columns (continued)

Greco Roman Fluted


10-3

/8"

35-1

/4"

20-7

/8"

4"

1-3/8"

2-3/4"

2-3/4"

2-3/4"


12.6

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


1-3/4"

3-1/2"

3-1/2"

3-1/2"

1-3/4"

3-1/2"

3-1/2"

1-3/

4"

3-15/16"

10-5

/16"

35-1

/4"

21"

Greco Roman Rope Twist


3-7/8"

10-1

/4"

35-1

/4"

21-1

/8"

2-1/8"

2-1/

8"

4-1/4"

2-1/8"

4-1/4"

4-1/4"

4-1/4"

4-1/4"



3-13/16"

10-3

/16"

35-1

/4"

21-1

/4"

5" 5"

5" 5" 5"

2-1/2"

2-1/2"

2-1/

2"




Also available in a 42" height.

Federal Post


35-1

/4"

26-1

/8"

5-9/

16"

3-9/16"2-1/8"

4-1/4"

4-1/4"

4-1/4"

4-1/4"

4-1/4"

2-1/8"

2-1/

8"


12.7

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts



35-1

/4"

6-5/

8"22

"6-

5/8"

1-3/4"

3-1/2"

3-1/2"

3-1/2"

1-3/4"

3-1/2"

3-1/2"

1-3/

4"

Century Plain



35-1

/4"

6-5/

8"22

"6-

5/8"

2-1/8"

2-1/

8"

4-1/4"

2-1/8"

4-1/4"

4-1/4"

4-1/4"

4-1/4"

Century Plain


35-1

/4"

6-5/

8"22

"6-

5/8"

5" 5"

5" 5" 5"

2-1/2"

2-1/2"

2-1/

2"

Century Plain

Century Plain


42"

6-5/

8"28

-3/4

"6-

5/8"

1-3/4"3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

1-3/4"

1-3/

4"


12.8

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts



2-3/4"

2-3/4"

9-1/

4"35

-1/4

"21

-7/1

6"4-

9/16

"

2-3/4"

2-3/4"

9-1/

4"35

-1/4

"21

-7/1

6"4-

9/16

"

2-3/4"

2-3/4"

9-1/

4"35

-1/4

"21

-7/1

6"4-

9/16

"2-3/4"

2-3/4"

11-7

/8"

35-1

/4"

20-9

/16"

2-13/16"

Lakeland Plain

Lakeland Rope

Lakeland Fluted

Lakeland Square

Specie Part No. Whole Cherry* 2655613A Maple 2655614A Paint Grade 2655615A Red Oak 2655616A





12.9

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


3-1/2"

3-1/2"

35-1

/4"

6-3/

8"22

-1/1

6"6-

13/1

6"

3-1/2"

3-1/2"

35-1

/4"

6-3/

8"22

-1/1

6"6-

13/1

6"

3-1/2"

3-1/2"

35-1

/4"

6-3/

8"22

-1/1

6"6-

13/1

6"

3-1/2"

3-1/2"

35-1

/4"

6-3/

8"22

-1/1

6"6-

13/1

6"

Edgewood Plain

Edgewood Reeded

Edgewood Fluted

Edgewood Rope

Specie Part No. Whole Rubberwood 2652464A





12.10

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts



3-3/4"

3-3/4"

13-1

/4"

35-1

/4"

22"

3-3/4"

3-3/4"

11-7

/8"

35-1

/4"

23-3

/8"

3-3/4"

13-1

/4"

35-1

/4"

22"

3-3/4"

5"

5"11

-3/4

"35

-1/4

"23

-1/2

"

Woodburn Square

Newberg Square

Woodburn Square Routed

Newberg Square






12.10A

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts

Summer 2013 Conestoga Wood Specialties CorporationStandard lead-time is 7-10 days, no expedites available. Expedites available: 3 day red expedite (20% upcharge) and 5 day blue expedite (10% upcharge).


8"6"

36"

22"

1-3/4"

1-3/4"

1-3/

4"

3-1/2" 3-1/2"

3-1/2"3-1/2" 3-1/2"

Mission Full Rout

Specie Part No. Whole Split 3/4 Cherry 2652526A Maple 2652527A Paint Grade 2652528A Red Oak 2652529A

8"6"

36"

22"

1-3/4"

1-3/4"

1-3/

4"

3-1/2" 3-1/2"

3-1/2"3-1/2" 3-1/2"

Mission Chamfer


8"6"

36"

22"

1-3/4"

1-3/4"

1-3/

4"

3-1/2" 3-1/2"

3-1/2"3-1/2" 3-1/2"

Mission Partial Rout


8"6"

36"

22"

1-3/4"

1-3/4"

1-3/

4"

3-1/2" 3-1/2"

3-1/2"3-1/2" 3-1/2"

Mission Plain


12.10B

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts

Conestoga Wood Specialties Corporation Summer 2013Standard lead-time is 7-10 days, no expedites available. Expedites available: 3 day red expedite (20% upcharge) and 5 day blue expedite (10% upcharge).

12.11

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts



Specie Part No. Whole Cherry 635.74.620 Maple 635.74.120 Red Oak 635.74.420

3-1/2"

3-1/2"

7"4-

1/2"

34-1

/2"

23"

Arts & Crafts Post

Specie Part No. Whole Cherry 635.74.640 Maple 635.74.140

Art Deco Square Post

3-1/2"

3-1/2"

7-1/

16"

4-1/

2"34

-1/2

"22

-15/

16"

3-1/2"

3-1/2"

35-1

/4"

6-3/

4"21

-1/4

"7-

1/4"

4-1/4"

4-1/4"

35-1

/4"

6-3/

4"21

-1/4

"7-

1/4"

Cresswell Cresswell

Specie Part No. Whole Cherry 2652458A Maple 2652459A Paint Grade 2652460A


12.12

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts



Specie Part No. Whole Split 3/4 Round Alder 2651295A Cherry 2651293A Maple 2651294A Red Oak 2651292A

1-3/

4" 3-1/2" 3-1/2" 1-3/4"

3-1/2" 3-1/2" 3-1/2"

1-3/4"

35-1

/2"

5-3/

4"24

"5-

3/4"

Ashbee Square



42"

7-1/

2"27

"7-

1/2"

2-1/

8"4-1/4" 4-1/4" 2-1/8"

4-1/4" 4-1/4" 4-1/4"

2-1/8"

Ashbee Square

2-1/

8"4-1/4" 4-1/4" 2-1/8"

4-1/4" 4-1/4" 4-1/4"

35-1

/2"

5-3/

4"24

"5-

3/4"

2-1/8"


1-3/

4" 3-1/2" 3-1/2" 1-3/4"

3-1/2" 3-1/2" 3-1/2"

1-3/4"

42"

7-1/

2"27

"7-

1/2"

Ashbee Square

Ashbee Square

12.13

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts



8-1/

4"26

-3/4

"

35"

3"

3"

5-3/

16"

5-3/

16"

24-1

/4"

34-5

/8"

3"

3"

35-1

/4"

27-1

/4"

4"4"

3-3/4"

3-3/4"

3-3/4"

3-3/4"

35-1

/4"

27-7

/8"

3-11/16"

3-11/16"

Newtown Square

Hillsboro Square

Hudson Post

Hillsboro Square






12.14

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts




3-1/2"

3-1/2"

35-1

/4"

Dunkirk Square


5"

5"

35-1

/4"


4-1/4"

4-1/4"

35-1

/4"

Dunkirk Square

Dunkirk Square





12.15

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts



Specie Part No. Whole Cherry 635.50.688 Maple 635.50.188 Red Oak 635.50.488

Bexley Square



2 Sided Taper

2 Sided Taper

Also available in a 42" height

34-1

/2"

2"

2"

4"

1-3/4"

8-3/

4"

35-1

/4"

2-3/4"

2-3/4"

2"

8-3/

4"

35-1

/4"

4-1/4"

4-1/4"

2"

8-3/

4"

35-1

/4"

3-1/2"

3-1/2"

2"

2 Sided Taper



12.16

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts



4 Sided Taper



35-1

/4"

4-1/4"

4-1/4"

2"

7-1/

2"

42"

7-1/

2"

4-1/4"

4-1/4"

2"


35-1

/4"

3-1/2"

3-1/2"

2"

7-1/

2"


35-1

/4"

2"

2-3/4"

2-3/4"

7-1/

2"

4 Sided Taper

4 Sided Taper 4 Sided Taper


12.17

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts



2-3/4"

34-1

/2"

26-1

/2"

6"2"

2-3/4"2-3/4"

Routed Corner Post

2-3/4"34

-1/2

"26

-1/2

"6"

2"2-3/4"2-3/4"

Scroll Corner PostAcanthus Corner Post

2-3/4"

34-1

/2"

2-3/4"2-3/4"

26-1

/2"

6"2"

3-1/4"

31-1

/2"

19"

5"

3-3/8"

2-3/8"2-3/8"

Montreal

Specie Part No. Price Cherry 2650984A Maple 2650985A PG-Basswood 2655475A



Specie Part No. Whole Alder 2655607A Cherry 2655608A Maple 2655609A Paint Grade 2655610A

12.18

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts




8-1/

16"

29-1

/4"

21-3

/16"

2-3/4" 2-3/4" 2-3/4"

1-3/8"2-3/4" 2-3/4"

1-3/8"

1-3/

8"

English Country


14-3

/4"

35-1

/4"

4-1/4"

4-1/4" 4-1/4" 4-1/4"

4-1/4" 2-1/8"

2-1/8"

2-1/

8"

20-1

/2"


13-5

/8"

35-1

/4"

21-5

/8"

1-3/4"

3-1/2"

3-1/2"

3-1/2"

1-3/4"

3-1/2"

3-1/2"

1-3/

4"

Specie Part No. Whole Split Cherry 2655139 Maple 2655137

34-1

/2"

23"

7"4-

1/2"

2-13/16" 2-13/16"

1-13/32"2-13/16"

Danville

English Country

English Country


12.19

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts



2-1/8"

2-1/

8"

4-1/4"

2-1/8"

4-1/4"

4-1/4"

4-1/4"

25-1

/4"

5"35

-1/4

"

4-1/4"

5"

1-3/4"

3-1/2"

3-1/2"

3-1/2"

1-3/4"

3-1/2"

3-1/2"

5"25

-1/4

"5"

35-1

/4"

1-3/

4"

English Country Double SquareEnglish Country Double Square



Also available in a 42" height. Also available in a 42" height.

10"

35-1

/4"

21-1

/4"

4"

3-1/2"

3-1/2" 3-1/2"

1-3/4"

Basket Weave Harvest


Specie Part No. Whole Split Cherry 2651005A Maple 2651006A Paint Grade 2655559A Red Oak 2651007A

35-1

/4"

23-7

/8"

5-11

/16"

5-11

/16"

2"

4" 4" 2"

4" 4"4"

2"


12.20

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts



2-1/2"2"

13-3

/4"

35-1

/4"

17"

1-3/4"

3-1/2"

3-1/2"

3-1/2"

1-3/4"

3-1/2"

3-1/2"

1-3/

4"

Countryside Plain


11-1

/16"

35-1

/4"

24-3

/16"

1-3/4"

3-1/2"

3-1/2"

3-1/2"

1-3/4"

3-1/2"

3-1/2"

1-3/

4"

Country Kitchen Plain


3-1/2"

3-1/2" 3-1/2"

1-3/4"

11-1

/16"

35-1

/4"

24-3

/16"

Country Kitchen Fluted


35-1

/4"

23-9

/16"

2-5/8"

5-5/

8"

2"

4" 4" 2"

4" 4"4"

2"

3-7/16"

Reedsport



12.21

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


1-3/4"

3-1/2"

3-1/2"

3-1/2"

1-3/4"

3-1/2"

3-1/2"

1-3/

4"

13"

35-1

/4"

22-1

/4"

Country French Plain


2-1/8"

2-1/

8"

4-1/4"

2-1/8"

4-1/4"

4-1/4"

4-1/4"

4-1/4"

13"

35-1

/4"

22-1

/4"

Country French Plain


3-1/2"

3-1/2" 3-1/2"

1-3/4"

13"

35-1

/4"

22-1

/4"

Country French Reeded



13"

35-1

/4"

22-1

/4"

4-1/4"

4-1/4"

4-1/4"

2-1/8"

Country French Reeded



12.22

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts



4-1/4"

4-1/4" 4-1/4"

1-3/4"

5-1/

8"35

-1/4

"23

-3/8

"6-

3/4"

Waverly


3-1/2"

3-1/2" 3-1/2"

1-3/4"

5-1/

8"35

-1/4

"23

-3/8

"6-

3/4"

Waverly



1-3/

4" 3-1/2" 3-1/2" 1-3/4"

3-1/2" 3-1/2" 3-1/2"35

-1/4

"5-

1/2"

23-3

/4"

6"

1-3/4"

Athens

Also available in a 4-1/4" square.

Biloxi

1-3/

4" 3-1/2" 3-1/2" 1-3/4"

1-3/4"

3-1/2" 3-1/2" 3-1/2"

35-1

/4"

7"22

-1/4

"6"


Also available in 4-1/4"


12.23

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


Custom Notching - Table Legs

•Leg notching is a custom millwork option used to conceal face frame ends and corners on island cabinetry. Custom notch table legs and posts to your exact requirements.

•Select table leg and post styles from the prior pages; contact Customer Service for availability.•Available only on whole table legs and posts.•This is not a mortise and tenon option.•Custom notching is not available on bun feet, corbels or appliques.•Lead-time 12-15 days unfinished, add 5-6 days for finishing.•The single notching option does not run the entire length of the leg. Please specify depth,

width and height of notch.•The double notching option will be notched in two places. Please specify depth, width and

height for both notches.

Custom Notching Order Form

Customer Name: ____________________________ Date: ________________________

Account Number: ___________________________ Purchase Order #: ______________

Table Leg Part Number: ______________________ Specie: _______________________

Table Leg Description: _______________________ Quantity: _____________________

Finish (if applicable): _________________________

Special Instructions: _____________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

C

D

BA

B

C

G

H

D

A

FE

Single Notching

Sizes

A ________

B ________

C ________

D ________

Double Notching

Sizes

A ________

B ________

C ________

D ________

E ________

F ________

G ________

H ________

12.24

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


Corner Treatments

1-7/8"

2-13/16"

1-1/8" 1-1/8"

3"

2-1/8"

1-3/8" 1-1/2"

3-1/2"

10"

3"3"

6"

28"38"36"

4-1/4"

Corner Post(accommodates 1-1/2" and 2" elements)

Specie Part No. Price Alder 2650170A Cherry 2650139A Hard Maple 2650140A Red Oak 2650141A

Rope Moulding

Corner Post

Split End Cap

Split End Cap

Corner Treatment Applications

Plain Moulding

Corner Post

Split Spindle

Split Spindle


Reeded Moulding

Corner Post

Split End Cap

Split End Cap


12.25

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts

Summer 2013 Conestoga Wood Specialties CorporationStandard lead-time is 7-10 days, no expedites available. Expedites available: 3 day red expedite (20% upcharge) and 5 day blue expedite (10% upcharge).

1-1/2" Mouldings

2-1/2"

5-27/32"

1-13/32"

End Blocks (accommodates 1-1/2" moulding)

3"

2-1/8"1-1/4"

3"

2-1/2"

2-1/8"

1-1/8"

Split Spindles (accommodates 1-1/2" moulding) Center Spindles (accommodates 1-1/2" moulding)

1-1/2"

1-1/2"

1-1/2"

1-1/2"

96"

96"

96"

96"

Plain

Fluted

Reeded

Rope

Corner Treatments (continued)




Specie Alder

Part No. 2650176A

Price Specie Cherry

Part No. 2650104A

Price Specie Price Specie Red Oak

Part No. 2650105A

Price

Specie

Alder

Part No.

2650180A

Price Specie Cherry

Part No. 2650107A

Price Specie Price

Specie

Red Oak

Part No.

2650108A

Price

Specie

Alder

Part No.

2650178A

Price Specie

Cherry

Part No.

2650110A

Price Specie Price

Specie

Red Oak

Part No.

2650111A

Price

Specie

Alder

Part No.

2650174A

Price Specie

Cherry

Part No.

112R

Price Specie Part No.

112R

Price Specie

Red Oak

Part No.

112R

Price

Hard Maple

Part No.

2650103A

Part No.

2650109A

Part No.

2650106AHard Maple

Split End Caps (accommodates 1-1/2" moulding)


1-7/8"

2-13/16"

1-1/8"

1-3/8"

Hard Maple

Hard Maple

12.26

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts

Conestoga Wood Specialties Corporation Summer 2013Standard lead-time is 7-10 days, no expedites available. Expedites available: 3 day red expedite (20% upcharge) and 5 day blue expedite (10% upcharge).

2" Mouldings

3"

5-27/32"

1-3/8"

End Blocks (accommodates 2" moulding)

3-1/2"

3"1-1/2"

3-1/2"

3"

2-55/64"

1-1/2"Split Spindles (accommodates 2" moulding) Center Spindles

(accommodates 2" moulding)

2"

2"

2"

2"

96"

96"

96"

96"

Plain

Fluted

Reeded

Rope

Corner Treatments (continued)




Specie Alder

Part No. 2650177A

Price Specie Cherry

Part No. 2PLN

Price Specie Part No. 2PLN

Price

Specie Red Oak

Part No. 2PLN

Price

Specie Alder

Part No. 2650181A

Price Specie Cherry

Part No. 2FLT

Price Specie Part No. 2FLT

Price

Specie Red Oak

Part No. 2FLT

Price

Specie Alder

Part No. 2650179A

Price Specie Cherry

Part No. 2REE

Price Specie Part No. 2REE

Price

Specie Red Oak

Part No. 2REE

Price

Specie Alder

Part No. 2650175

Price Specie Cherry

Part No. 2ROP

Price Specie Part No. 2ROP

Price Specie Red Oak

Part No. 2ROP

Price Hard Maple

Hard Maple

Hard Maple

Hard Maple

Split End Caps (accommodates 2" moulding)


1-1/8"

3"

2-3/8"

1-3/8"

12.27

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


4"

3"3-1/2"

1-7/8"Top View

Tulip Foot Tulip Foot

3-1/16"

5"

1-13/16"3-1/2"

Top View

3-9/16"

4"

4"

1-3/4" Top View

Country French Foot Country French Foot

4"3-1/4"

1-7/8"

Top View

5"





Bun Feet

Countryside FootTulip Oval Foot

4"

3-1/2"Top View

3-1/16"2-3/8"

5/8"

4-5/8"

3-7/8"

1-7/8"

Top View



*Alder available, visit OrderLink or call Customer Service for pricing.

12.28

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


Bun Feet (continued)

4-1/2"

3-9/16"4-1/2"

2" Top View

Estate Foot Plain


Estate Foot Twist Wheeler Foot

4-1/2"

3-9/16"4-1/2"

2" Top View

2-3/4"

3-1/4"4-3/4"

Top View


4-1/2"

3-9/16"4-1/2"

2" Top View

Estate Foot Reeded


4"

4-17/32"5-1/4"

Top View

2-15/16"

Cosmopolitan Foot Cosmopolitan Foot

5"

4-17/32"5-1/4"

2-1/2" Top View





12.29

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts



Kennett Square Foot Vessel Foot


Top View

4"

4"

2-1/4"

4"

3-1/2"3-3/4"

2-1/4" Top View

Corbett Square Foot


Top View

4-1/2"

2-3/4"4"

Shaker Square Foot


Harlow Square Foot


Harlow Rectangular Foot



Top View

4-1/2"

4"

3"

Top View

4-5/8"

1-5/8"3-1/2"

2-3/8"2-1/2"

Top View

5/8"

3-7/8"

4-5/8"

2-1/8"4"


12.30

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


Square Taper Foot Square Taper Foot

Top View

2"

1-1/2"

4"

5"

3"



Top View

2"

1-1/2"3"

4"

4"


Bun Foot


4"

3-3/8"5-1/4"

Orwell Foot


Hobart Square FootHobart Square Foot



2-7/16" Top View

2-3/4"

3-3/8"

2-7/16"Top View

3-3/8"

4-1/2"

4"

3"4-1/2"

3" Top View


12.31

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts



Rochelle Foot (Corner)


Rochelle Foot (Corner)


Rochelle Curved Foot (Left & Right)

Specie Part No. Whole ($ per pair) Cherry 2652511A Maple 2652512A Paint Grade 2652513A

Rochelle Curved Foot (Left & Right)


Rochelle Straight Foot (Left & Right)


4"

5-7/8"

2-15/16"

15/16"1-11/16"

Rochelle Straight Foot (Left & Right)


4"

5-7/8"

2-15/16"

15/16"1-11/16"

4-1/2"

5-7/8"

2-15/16"

15/16"1-11/16"

4-1/2"

5-7/8"

2-15/16"

15/16"1-11/16"

4"

5-7/8"

2-15/16"

5-7/8"

4-1/2"

5-7/8"

2-15/16"

5-7/8"

12.32

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


French Scroll Foot

Specie Part No. Whole Cherry 634.27.616 Maple 634.27.116

3"2"

2"2"

2-53/64"

3-3/

8"6"

1-3/4"

1"


Plain Scroll Foot

4-7/8"

4-3/4"4-3/8"

1-3/8"

*Also available in a 5-7/8" height.

Acanthus Scroll Foot - Left Acanthus Scroll Foot - Right

5"4-3/8"

1-5/8"

5-3/4"

5"4-3/8"

1-5/8"

5-3/4"

Acanthus Foot

Specie Part No. Whole Cherry 2655812A Maple 2655813A

Specie Part No. Whole Cherry 2651210A Maple 2651209A PG-Basswood 2655479A



Rochelle Moulding


10"

1-7/8"

4-1/2"

1"Top View

3-3/16"3-1/2"

12.32A

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


A B

C

Isabelle Corbel

Wood Corbels

Dimension Specie Part No. A B C Price Cherry 2655803A 2" 2-3/4" 4" Maple 2655804A 2" 2-3/4" 4" Cherry 2655806A 2-1/2" 6-1/8" 8" Maple 2655807A 2-1/2" 6-1/8" 8" Cherry 2655809A 4" 9-1/2" 14" Maple 2655810A 4" 9-1/2" 14"

12.32B

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


12.34

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


BA

C

Arts & Crafts Corbel



Large Arts & Crafts Corbel


Wood Corbels (continued)

Dimension Specie Part No. A B C Price Maple 194.69.151 3" 8" 12"

Dimension Specie Part No. A B C Price Cherry 198.04.630 2-13/16" 8-7/8" 12" Maple 198.04.130 2-13/16" 8-7/8" 12"

Dimension Specie Part No. A B C Price Cherry 198.04.640 5-3/4" 3-15/16" 9" Maple 198.04.140 5-3/4" 3-15/16" 9" Cherry 198.04.650 2-7/8" 2-15/16" 6" Maple 198.04.150 2-7/8" 2-15/16" 6"

Dimension Specie Part No. A B C Price Cherry 194.69.654 1-3/4" 6" 9" Maple 194.69.154 1-3/4" 6" 9" Red Oak 194.69.454 1-3/4" 6" 9" Cherry 194.69.655 1-3/4" 8" 12" Maple 194.69.155 1-3/4" 8" 12" Red Oak 194.69.455 1-3/4" 8" 12"

Dimension Specie Part No. A B C Price Cherry 2651084A 3" 2-3/4" 6" Maple 2651085A 3" 2-3/4" 6" PG-Basswood 2655454A 3" 2-3/4" 6" Cherry 2651086A 6" 4" 9" Maple 2651087A 6" 4" 9" PG-Basswood 2655455A 6" 4" 9" Cherry 2651088A 3-1/2" 9" 12" Maple 2651089A 3-1/2" 9" 12" PG-Basswood 2655456A 3-1/2" 9" 12"

BA

C

BA

C

BA

C

A B

C

12.35

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


A B

C

A B

C

A B

C

Small Shaker Corbel

Large Shaker Corbel

Medium Shaker Corbel

Routed Corbel



Dimension Specie Part No. A B C Price Cherry* 2655668A 5-3/8" 6-3/4" 13-3/8" Maple 2655669A 5-3/8" 6-3/4" 13-3/8" Paint Grade 2655670A 5-3/8" 6-3/4" 13-3/8" Red Oak 2655671A 5-3/8" 6-3/4" 13-3/8"

A

C

B

Dimension Specie Part No. A B C Price Cherry* 2655663A 4" 3-1/2" 6-3/4" Maple 2655664A 4" 3-1/2" 6-3/4" Paint Grade 2655665A 4" 3-1/2" 6-3/4" Red Oak 2655666A 4" 3-1/2" 6-3/4"

Dimension Specie Part No. A B C Price Cherry* 2655673A 6-5/8" 7-1/2" 16" Maple 2655674A 6-5/8" 7-1/2" 16" Paint Grade 2655675A 6-5/8" 7-1/2" 16" Red Oak 2655676A 6-5/8" 7-1/2" 16"

Counter Support Bracket (sold in pair)

Dimension Specie Part No. A B C Price Alder 2200186 1-15/16" 5-15/16" 8-1/16" Cherry 2200183 1-15/16" 5-15/16" 8-1/16" Maple 2200184 1-15/16" 5-15/16" 8-1/16" Oak 2200185 1-15/16" 5-15/16" 8-1/16" Alder 2200182 1-15/16" 7-15/16" 10-1/16" Cherry 2200179 1-15/16" 7-15/16" 10-1/16" Maple 2200180 1-15/16" 7-15/16" 10-1/16" Oak 2200181 1-15/16" 7-15/16" 10-1/16"

BA

C


12.36

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


C

A B

Scroll Corbel

Scroll Routed Corbel

Hand Carved Scroll Corbel

Scroll Corbel

Hand Carved Scroll Corbel




Dimension Specie Part No. A B C Price Cherry 2650932A 3-1/2" 8" 13" Maple 2650933A 3-1/2" 8" 13" PG-Basswood 2655453A 3-1/2" 8" 13"

BA

C

BA

C

C

A B

A B

C

Dimension Specie Part No. A B C Price Cherry 2650920A 2-3/4" 2-5/8" 4-1/2" Maple 2650921A 2-3/4" 2-5/8" 4-1/2" PG-Basswood 2655447A 2-3/4" 2-5/8" 4-1/2" Cherry 2650922A 3-1/2" 3-3/4" 6-1/2" Maple 2650923A 3-1/2" 3-3/4" 6-1/2" PG-Basswood 2655448A 3-1/2" 3-3/4" 6-1/2" Cherry 2650924A 4-1/2" 5-3/4" 9-3/4" Maple 2650925A 4-1/2" 5-3/4" 9-3/4" PG-Basswood 2655449A 4-1/2" 5-3/4" 9-3/4" Cherry 2650926A 5-1/4" 4-1/2" 12-3/8" Maple 2650927A 5-1/4" 4-1/2" 12-3/8" PG-Basswood 2655450A 5-1/4" 4-1/2" 12-3/8" Cherry 2650928A 5-1/2" 7-1/4" 14" Maple 2650929A 5-1/2" 7-1/4" 14" PG-Basswood 2655451A 5-1/2" 7-1/4" 14" Cherry 2650930A 8" 6-1/2" 14" Maple 2650931A 8" 6-1/2" 14" PG-Basswood 2655452A 8" 6-1/2" 14"

Dimension Specie Part No. A B C Price Cherry* 2655653A 3-1/2" 7" 14" Maple 2655654A 3-1/2" 7" 14" Paint Grade 2655655A 3-1/2" 7" 14" Red Oak 2655656A 3-1/2" 7" 14"


12.37

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


A B

C

A B

C

A B

C

Acanthus Corbel

Hand Carved Acanthus Corbel


Acanthus Corbel





Dimension Specie Part No. A B C Price Cherry 2650942A 3-3/4" 8-1/4" 13-1/4" Maple 2650943A 3-3/4" 8-1/4" 13-1/4" PG-Basswood 2655460A 3-3/4" 8-1/4" 13-1/4"

Dimension Specie Part No. A B C Price Cherry 2650940A 3-1/2" 8" 13" Maple 2650941A 3-1/2" 8" 13" PG-Basswood 2655459A 3-1/2" 8" 13"

Dimension Specie Part No. A B C Price Cherry 2650944A 3" 1-5/8" 6-1/4" Maple 2650945A 3" 1-5/8" 6-1/4" PG-Basswood 2655461A 3" 1-5/8" 6-1/4" Cherry 2650946A 5-1/2" 2-1/2" 9-7/8" Maple 2650947A 5-1/2" 2-1/2" 9-7/8" PG-Basswood 2655462A 5-1/2" 2-1/2" 9-7/8" Cherry 2650948A 7-1/2" 3-1/2" 14" Maple 2650949A 7-1/2" 3-1/2" 14" PG-Basswood 2655463A 7-1/2" 3-1/2" 14" Cherry 2650950A 7" 3-3/8" 21-7/8" Maple 2650951A 7" 3-3/8" 21-7/8" PG-Basswood 2655464A 7" 3-3/8" 21-7/8"

A

C

B

A B

C

12.38

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


A B

C

BA

C





Dimension Specie Part No. A B C Price Cherry 194.40.610 3" 4-1/4" 13-3/8" Maple 194.40.110 3" 4-1/4" 13-3/8" Cherry 194.40.611 5" 4-1/4" 13-1/2" Maple 194.40.111 5" 4-1/4" 13-1/2"


Dimension Specie Part No. A B C Price Cherry 194.40.620 3-3/4" 6-1/4" 12-1/8" Maple 194.40.120 3-3/4" 6-1/4" 12-1/8" Cherry 194.40.621 4-1/4" 7-5/8" 14" Maple 194.40.121 4-1/4" 7-5/8" 14"

BA

C

12.39

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


A

C

B A B

C

Tall Acanthus Corbel

Grape Corbel

Hand Carved Grape Corbel

Grape Corbel

Hand Carved Grape Corbel



Dimension Specie Part No. A B C Price Cherry 194.69.603 5-3/4" 6-1/16" 8-7/8" Maple 194.69.103 5-3/4" 6-1/16" 8-7/8"

Dimension Specie Part No. A B C Price Cherry 194.69.607 2" 9-3/16" 12-3/4" Maple 194.69.107 2" 9-3/16" 12-3/4"


Dimension Specie Part No. A B C Price Cherry 2650956A 5" 5-1/4" 10-1/4" Maple 2650957A 5" 5-1/4" 10-1/4" PG-Basswood 2655466A 5" 5-1/4" 10-1/4" Cherry 2650958A 5-1/2" 7-1/2" 14-1/2" Maple 2650959A 5-1/2" 7-1/2" 14-1/2" PG-Basswood 2655467A 5-1/2" 7-1/2" 14-1/2"

A

C

B

BA

C

BA

C

12.40

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


BA

C

BA

C

Hand Carved Acanthus Applique

Wood Appliques

Acanthus Applique

Dimension Specie Part No. A B C Price Cherry 194.78.660 20" 5/8" 4-1/2" Maple 194.78.160 20" 5/8" 4-1/2"

Hand Carved Grape Applique

Dimension Specie Part No. A B C Price Cherry 2650974A 20" 3/4" 4-1/4" Maple 2650975A 20" 3/4" 4-1/4" PG-Basswood 2655472A 20" 3/4" 4-1/4" Cherry 2650976A 24" 3/4" 5" Maple 2650977A 24" 3/4" 5"

Dimension Specie Part No. A B C Price Cherry 2650960A 24-5/8" 3/4" 6" Maple 2650961A 24-5/8" 3/4" 6" PG-Basswood 2655468A 24-5/8" 3/4" 6"

Dimension Specie Part No. A B C Price Cherry 2650962A 36-3/8" 1" 7-1/2" Maple 2650963A 36-3/8" 1" 7-1/2" PG-Basswood 2655469A 36-3/8" 1" 7-1/2"

Dimension Specie Part No. A B C Price PG-Basswood 2655473A 24" 3/4" 5" Cherry 2650978A 36" 1" 5-3/4" Maple 2650979A 36" 1" 5-3/4" PG-Basswood 2655474A 36" 1" 5-3/4"

BA

C

12.41

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


Wood Appliques (continued)

Hand Carved Acanthus Appliques (sold in pair)


Dimension Specie Part No. A B C Price Cherry 2651218A 7-3/4" 1/2" 3-1/2" Maple 2651219A 7-3/4" 1/2" 3-1/2" PG-Basswood 2655483A 7-3/4" 1/2" 3-1/2"

Dimension Specie Part No. A B C Price Cherry 2651222A 11" 9/16" 3" Maple 2651221A 11" 9/16" 3" PG-Basswood 2655484A 11" 9/16" 3"


Dimension Specie Part No. A B C Price Cherry 2650964A 7-5/8" 11/16" 3-1/8" Maple 2650965A 7-5/8" 11/16" 3-1/8" PG-Basswood 2655470A 7-5/8" 11-16" 3-1/8"

BA

C

BA

C

BA

C

12.42

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


Wood Ornaments

BA

C

BA

C

Small Acanthus Capital

Hand Carved Acanthus Capital

Round Bullseye Ornament

Large Acanthus Capital

Grape Ornament

Round Acanthus Ornament


Dimension Specie Part No. A B C Price Cherry 194.78.643 5-1/8" 1-9/16" 4-1/2" Maple 194.78.143 5-1/8" 1-9/16" 4-1/2"

Dimension Specie Part No. A B C Price Cherry 2650968A 6" 1-3/8" 6" Maple 2650969A 6" 1-3/8" 6" PG-Basswood 2655471A 6" 1-3/8" 6"

Dimension Specie Part No. A B C Price Cherry 194.78.652 2-1/8" 3/8" 2-1/8" Maple 194.78.152 2-1/8" 3/8" 2-1/8" Cherry 194.78.653 2-7/8" 3/8" 2-7/8" Maple 194.78.153 2-7/8" 3/8" 2-7/8"


Dimension Specie Part No. A B C Price Cherry 194.78.651 2-7/8" 3/8" 2-7/8" Maple 194.78.151 2-7/8" 3/8" 2-7/8"

A

2-9/16"

B

C C

BA

3-3/4"

C

BA

4-1/4"

A B

C

12.43

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


Wood Ornaments (continued)

C

BA

C

BA

Square Pyramid Block

Beveled Pyramid Block

Leaf & Berry Square Ornament

Slant Pyramid Block

Beaded Pyramid Block

Large Square Acanthus Ornament


Dimension Specie Part No. A B C Price Cherry 2650892A 3" 1-1/16" 3" Maple 2650891A 3" 1-1/16" 3"




Dimension Specie Part No. A B C Price Cherry 194.75.632 2-7/8" 3/8" 2-7/8" Maple 194.75.132 2-7/8" 3/8" 2-7/8"

A

C

B

3/8"

A

C

B

3/4"

A

C

B

3/8"

A

C

B

9/16"

12.44

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


Wood Knee Brackets

Grain Grain

Style “A” Style “B”

•Use design charge plus square foot material charge.•Material Category B.•3/4" thick standard, 1" thick optional (bracket only).•Available unfinished or finished. See the Solid Wood Finishing Program section for

availability and pricing.•6 day standard lead-time, 2 day code red expedite lead-time; add 5-6 days for finishing.

Installation Cleats

•Use design charge plus square foot material charge.•Material Category B.• Installation cleats sold in pairs.•Brackets are 3/4" x 3" wide, sized 1-1/2" longer than the appropriate bracket for

installation.•Top cleat is designed to overlap back cleat by 3/4".•Machine edge two long and one short edge; B2 one short (leading edge).•Available unfinished or finished. See the Solid Wood Finishing Program section for

availability and pricing.•6 day standard lead-time, 2 day code red expedite lead-time; add 5-6 days for finishing.

Knee Bracket Pricing Style “A” Style “B” Bracket Size Design Design Charge Charge

6"x6"

9"x9"

12"x12"

Installation Cleats Bracket Design Cleat Size Size Charge

Top: 3"x 8-1/4" 6"x6"

Back: 3"x7-1/2"

Top: 3"x11-1/4" 9"x9"

Back: 3"x10-1/2"

Top: 3"x14-1/4" 12"x12"

Back: 3"x13-1/2"

12.45

Le

gs

, Co

rb

eL

s &

AC

Ce

nt

s C

ustom

Pro

ducts


Outlet and Switch Plates

Outlet Plate

Switch Plate

Switch Plate

Outlet Plate

Switch Plate

Switch Plate

Specie Part No. Price Alder 2655701A Cherry 2655702A Maple 2655703A Red Oak 2655704A






5-3/4"

3/8"3-1/2"

5-3/4"

3/8"5-1/2"

5-3/4"

3/8"3-1/2"

5-3/4"

3/8"3-1/2"

5-3/4"

3/8"5-1/2"

5-3/4"

3/8"5-1/2"

12.46

Le

gs

, C

or

be

Ls

& A

CC

en

ts

Cus

tom

Pro

duc

ts


Vent Covers

•All vent covers crafted from solid hardwoods and made in the USA.•Vent covers are made to fit seamlessly with your hardwood floors, against the toekicks of

your kitchen cabinets, against baseboards and walls.•Toekick vent is predrilled to accept two mounting screws.•Fixed slats diffuse air in two directions (non-adjustable).•Custom sizes and designs are available. Contact Special Designs for a quote.•Vent covers are available unfinished or finished; reference the Solid Wood Finishing

Program section for finish options and pricing.•Lead-time 7 days unfinished, add 5 days for finishing.

Floor Vent Cover

A

B

C

Dimension Specie Part No. A B C Price Cherry 2655791A 5-3/4" 11-3/4" 3/4" Maple 2655792A 5-3/4" 11-3/4" 3/4" Red Oak 2655793A 5-3/4" 11-3/4" 3/4" Cherry 2655794A 5-3/4" 13-3/4" 3/4" Maple 2655795A 5-3/4" 13-3/4" 3/4" Red Oak 2655796A 5-3/4" 13-3/4" 3/4" Cherry 2655797A 5-3/4" 15-3/4" 3/4" Maple 2655798A 5-3/4" 15-3/4" 3/4" Red Oak 2655799A 5-3/4" 15-3/4" 3/4"

Toekick Vent Cover

A

B

C

Dimension Specie Part No. A B C Price Cherry 2655782A 3-5/8" 11-3/4" 3/4" Maple 2655783A 3-5/8" 11-3/4" 3/4" Red Oak 2655784A 3-5/8" 11-3/4" 3/4" Cherry 2655785A 3-5/8" 13-3/4" 3/4" Maple 2655786A 3-5/8" 13-3/4" 3/4" Red Oak 2655787A 3-5/8" 13-3/4" 3/4" Cherry 2655788A 3-5/8" 15-3/4" 3/4" Maple 2655789A 3-5/8" 15-3/4" 3/4" Red Oak 2655790A 3-5/8" 15-3/4" 3/4"

Custom Valances - Special Designs...Valances 60-1/16" to 96" Traditional Arch Valances 16" to 60"...

Documents

Transcript of Custom Valances - Special Designs...Valances 60-1/16" to 96" Traditional Arch Valances 16" to 60"...