WEST & BARKER, INC. is a custom plastic extrusion facility producing a wide variety of profile moldings, trims, and seals. West & Barker is proud to have served the RV Industry with functional and decorative extrusions as well as supplying the Window and Construction Industries for 40 years.

Since our founding in 1971, we have strived to consistently produce the highest quality extruded products at competitive prices. We at WEST & BARKER believe excellent service is our most favored trademark. To prove our commitment to the highest standard we implement a stringent Quality Assurance Policy. Our customer rejection rate is less than 1%. To better serve our clientele we maintain consistency and quality standards far above our competition.

WEST & BARKER,INC.Summit Ave., Niles,OH 44446

Phone: 330-652-9923Fax: 330-652-9991

Custom Plastic Extrusion Catalog

TABLE OF CONTENTS

Bead Welts 2

Bunk Rails 16

Cap Moldings 9

Ceiling/Side Wall Batten 12

Curtain - Door Tracks 13

Cove Gimp 2

Decorative Trims 16

Door Casings 15

Flat Strips 16

F Moldings 8

Gimp 2

Insert Tapes 3

Inside Corner Moldings 10

J Molding 10

L Moldings - Angles 8

Raceway 14Radius Corner Molding 7

Reverse Cove 2Screw Covers 3

Shelf Stop 8

Threshold/Plumbing Cover 14

T Moldings - Flexible P.V.C. 6

Beveled Edge T Molding 6

Bull Nose T Molding 6

Double Lip Off Set T Molding 5

Double Lip Serrated Face T Molding 6

Double Lip T Molding 5

T Moldings - Polyethylene 4

Double Lip Off Set T Molding 4

Double Lip T Molding 4Window Fillets 14

HOLLOW

PART # BEAD LEG

FN 129 3/16" 13/32"FN 491 7/32" 1/2"FN 678 5/16" 11/16"FN 485 11/32" 17/32"

SOLID

PART # SIZEPN 241 1/2"PN 763 1/2"

PART # SIZEFN 130 7/16"FN 285 3/4"

BEAD WELTS

COVE GIMP

REVERSE COVE - POLYETHYLENE (SEMI-RIGID)

REVERSE COVE - FLEXIBLE P.V.C.

2 Return to Table of Contents

INSERT TAPES

3 Return to Table of Contents

FE 1207 1"

FE 157 13/16"

FE 1208 3/4"

PART # SIZE

RN 526 5/8"

RN 581 17/64"RN 788 33/64"

RN 597 35/64"

RN 742 17/32"

SCREW COVERS

RN 277 35/64"RN 277-A 37/64"

DOUBLE LIP T MOLDING - POLYETHYLENE (SEMI-RIGID)

PART # SIZEPN 276-A 1/2"PN 276-C 9/16"PN 276 5/8"PN 504 11/16"PN 504-A 3/4"PN 504-C 13/16"

PART # SIZEPN 504-E 7/8"PN 474-A 15/16"PN 474 1"PN 324-B 1 1/16"PN 324-A 1 1/8"

T MOLDING - POLYETHYLENE (SEMI-RIGID)

PART # SIZEPN 390-A 3/8"PN 390 1/2"PN 390-B 9/16"PN 228-G 5/8"PN 228-C 21/32"PN 228-D 11/16"

PART # SIZEPN 332-C 7/8"PN 332-A 15/16"PN 332-B 1"PN 332 1 1/8"PN 458 1 1/8"PN 458-A 1 1/4"

OFF SET T MOLDING - POLYETHYLENE (SEMI-RIGID)

PART # SIZEPN 908 1"PN 392-A 1 1/8"PN 392 1 1/4"

DOUBLE LIP OFF SET T MOLDING - POLYETHYLENE (SEMI-RIGID)

PART # SIZEPN 889 1 1/8"

DOUBLE LIP SERRATED FACE T MOLDING - FLEXIBLE P.V.C.

PART # SIZEPN 492-A 45/64"PN 228-A 3/4"PN 492 3/4"PN 228-B 49/64"PN 228 13/16"PN 228-F 55/64"

4 Return to Table of Contents

*Embossing Available on all Polyethylene T-Moldings

PART # COVERAGE AREAFN 881 1 1/8"

DOUBLE LIP T MOLDINGS - FLEXIBLE P.V.C.

DOUBLE LIP OFF SET T MOLDING - FLEXIBLE P.V.C.

5 Return to Table of Contents

BULL NOSE T MOLDING - FLEXIBLE P.V.C.

BEVELED EDGE T MOLDING - FLEXIBLE P.V.C.

CONTOURED or SERRATED MOLDING - FLEXIBLE P.V.C.

PART # FN 705 1 1/16" 5-BumpFN 705-A 1 1/8" 5-Bump

FN 697 5/8" 3-BumpFN 697-A 13/16" 3-Bump

FN 136 11/16" 1-Bump

6 Return to Table of Contents

PART # SIZE

RN 233 5/32"

RN 864 1/8"RN 864-A 9/64"

RN 444-A 1.4"RN 444 1.5"RN 444-C 1.7"

RN 524 Plastic RetainerAL-ZP Aluminum Retainer

RADIUS CORNER MOLDINGS

7 Return to Table of Contents

PART # FOR PANELING SIZERN 378 3/16"RN 378-A 5/32"RN 378-B 1/8"

RN 1056 5/32"RN 484 1/4"

PART # FOR PANELING SIZERN 1196 3/8"RN 630 1/2"

SHELF TOP

RADIUS F MOLDING - EXTENDED LEG

F MOLDING - OUTSIDE CORNER

RADIUS F MOLDING - OUTSIDE CORNER

PART # FOR PANELING SIZERN 456 1/8" 3milRN 380-B 1/8" 3milRN 380 5/32" 4milRN 1055 5/32" 4milRN 456-A 3/16" 4.7mil

PART # FOR PANELING SIZERN 838-A 7/64"RN 239-A 1/8"RN 239 5/32"RN 838 5/32"RN 528-A 7/32"RN 528 1/4"RN 326 1/4"RN 326-A 3/8"RN 1001 1"

8 Return to Table of Contents

CAP MOLDING - RIGID P.V.C.

PART # GAP SIZE LEG SIZE PART # GAP SIZE LEG SIZE

9 Return to Table of Contents

PART # SIZE

RN 486 1/4"

RN 821 5/32"

RN 607 1/8"

PART # GAP SIZE

FN 309 1/16"

FN 576 1/8"

PART # GAP SIZE

PN 139 5/32"

J MOLDING - END CAP - RIGID P.V.C.

J MOLDING - END CAP - POLYETHYLENE (SEMI-RIGID)

J MOLDING - END CAP - FLEXIBLE P.V.C.

INSIDE CORNER MOLDINGS

10 Return to Table of Contents

SINGLE DIVIDER BARS - RIGID P.V.C.

PART # SIZE

DIVIDER BARS - RIGID P.V.C.

PART # SIZE PART # SIZE

RADIUS DIVIDER BAR - RIGID P.V.C.

PART # SIZERN 363 3/16"

ANGLED DIVIDER BAR - RIGID P.V.C.

PART # SIZE

RN 121-H 5/32"

11 Return to Table of Contents

Return to Table of Contents

CEILING / SIDEWALL BATTEN

12

CURTAIN - DOOR TRACKS

PART #

RN 383 Curtain TrackRN 690 Curtain TrackRN 690-A Curtain Track

RN 436 Curtain TrackRN 995 Curtain Track

RN 465 Door Track

RN 466 Door Track

RN 469 Curtain Track

RN 621 Curtain TrackRN 672 Curtain Track

13 Return to Table of Contents

THRESHOLD / PLUMBING COVER

PART #

RN 402 3 1/4" Threshold CoverRN 896 3 29/64" Threshold Cover

RN 972 4 3/4" Plumbing Cover

WINDOW FILLETS

PART #

PART #

RN 685 Wire Raceway BaseRN 739 Wire Raceway BaseRN 1058 Wire Raceway Base for RN 1057

RN 686 Wire Raceway Cover for RN 685 and RN 739RN 1057 Wire Raceway Cover for RN 1058

RN 990 Chassis RacewayRN 990-A Chassis Raceway (No Divider)

RACEWAY

14 Return to Table of Contents

DOOR CASINGS

15 Return to Table of Contents

BUNK RAILS

PART #

RN 664-T Bunk Slide (with Double Face Tape)

FLAT STRIPS - RIGID P.V.C.

FLAT STRIPS - FLEXIBLE P.V.C.

PART # USAGERN 1023 Mirror FrameRN 1024 Mirror Frame Insert

RN 979 Valance MoldingRN 980 Valance Molding Insert

DECORATIVE TRIMS

16 Return to Table of Contents