1

TURN

OUT GEAR

www.edarley.com/turnout | 1.800.323.0244

DRAG RESCUE DEVICE

HIGH BACK PANTS W/SUSPENDERS

ACTION BACK,KNEES & ELBOWS

RADIO POCKET WITH FLAP

ARASHIELD PANTCUFFS & KNEES

THUMB STRAPS

OVERLAPPINGCOLLAR

ZIPPER W/VELCRO®

OUTER CLOSURE

Coat Features:

Pant Features:u Rear bib for added protectionu Zipper with Velcro® outer closureu Two take up strapsu Reinforced cuffsu Arashield reinforced cuffsu Padded reinforced arashield kneesu Athletic knee designu Two bellows pocketsu Free H back suspenders

u 32" lengthu Tough Nomex®/Kevlar® outer shell u Stedair® 3000 on E89 moisture barrieru Athletic cut back and elbowu Zipper with Velcro® outer closureu 3" NYC triple trimu Combination handwarmer/bellows pocketsu Black Arashield cuffs u Radio pocket with flapu Flashlight holderu Mic clip

* For detailed measuring instructions go to www.edarley.com/turnoutmeasuring

YellowBlackGold

BL458 Darley Champion™ Gear Nomex®/Kevlar® Coat $950.95BL459 Darley Champion™ Gear Nomex®/Kevlar® Pants $698.95

SPECIFY COAT AND PANT SIZE (SEE PAGE 3 FOR SIZING CHART) SPECIFY COLOR: Black, Gold or Yellow

Custom Name PanelCustomize your gear with your choice of 2" (up to 12) or 3" (up to 8) letters.

SPECIFY MATERIAL AS51901 Custom Name Panel $15.95AS51902 Letters $3.95/per letter

Accessories not included

Fast 2 Week Shipping

2 1.800.323.0244 | www.edarley.com/turnout

TUR

NOU

T GE

AR

Inside every firefighter beats the heart of a Champion. Those with the passion to rise to the occasion.

Darley now offers a head-to-toe solution for your turnout gear needs at a special package price. Package includes Nomex® turnout gear coat and pants, Fire-Dex® 911™ helmet, Darley gold gauntlet gloves, Nomex® hood, Hellfire™ structural and hazmat firefighting boots, and Fire Fighter gear bag with carrying strap.

Our Champion™ gear is built to hold up in the toughest of conditions and is loaded with all the features you expect including plenty of large pockets and clips for your tools and communication equipment, reinforced knees, double-stitched seams and comfortable overlapping collar. Your safety is most important so we’ve included bright, reflective 3M™ Scotchlite™ triple trim, a fire resistant Nomex® IIIA outer shell and Drag Rescue Device per the latest NFPA safety standard.

DARLEY CHAMPION™ GEAR PACKAGE INCLUDES:PACKAGE SAVINGS OF $166

Red TanYellowBlackNavy

HELLFIRE™ STRUCTURAL AND HAZMAT FF BOOTS

NOMEX® HOOD JUMBO GEAR BAG

DARLEY GOLD GAUNTLET GLOVES

FIRE-DEX® 911™ HELMET

Accessories not included

Cat# Description Size Color PriceBK407 Darley Champion™ Gear Coat - Nomex® See Size Chart Yellow, Black, Tan, Red or Navy $736.95BK408 Darley Champion™ Gear Pants - Nomex® See Size Chart Yellow, Black, Tan, Red or Navy $404.95BB009 Hellfire™ Structural and Hazmat Felt-Lined FF Boots Size: 7-14, 15 Width: M, W, XW Black $133.95BH127 Darley Gold Gauntlet Gloves S-XL, Jumbo Gold $52.95AM003 Fire-Dex® 911™ Helmet N/A Red, Black, Yellow or White $180.95AK020 Nomex® Hood One Size Fits All White $27.95AS037 Jumbo Gear Bag N/A Red with Black Trim $64.95 GEAR PURCHASED SEPARATELY $1,602.65 HEAD-TO-TOE GEAR PACKAGE SPECIAL PRICE $1,436.95

3

TURN

OUT GEAR

www.edarley.com/turnout | 1.800.323.0244

Champion™ Gear Turnout Sizing

Size Chest Sleeve

Small 36"-38" 32"

Medium 40"-42" 34"

Large 44"-46" 35"

XLarge 48"-50" 35"

2XLarge 52"-54" 36"

CoatSize Waist Inseam

Small 30"-32" 29"

Medium 34"-36" 29"

Large 38"-40" 29"

XLarge 42"-44" 29"

2XLarge 46"-48" 29"

Pants

* For detailed measuring instructions go to www.edarley.com/turnoutmeasuring

11

1

2

3

4

5

6

32" COATNomex® IIIA outer shell 12REINFORCED KNEESPolymer coated knee and cuff reinforcements

13

7

PANTSNomex® IIIA outer shell14PANT LINERNomex® Q8 with Stedair® 3000 viral barrier

15PANT CLOSUREInner hook and loop outer hook and dee

16

OVERLAPPING COLLARThroat protector with Velcro® closure

MIC CLIPSLeft and right chest Nomex® mic clips

RADIO POCKET9"x3"x2" with double notch flap

EMBROIDERED PATCHDurable stitching

COAT CLOSUREVelcro® and easy-slide zipper

COAT CUFFSPolymer coated Kevlar® cuff and shoulder reinforcement

PATCH POCKETSTwo 10"x10" pocketswith drainage holes

SUSPENDERSAdjustable, black

8 BELLOWS POCKETSTwo 10"x10" full bellows pockets

17REFLECTIVE TRIM3" 3M™ Scotchlite™ lime/silver triple trim on coat and pants

9 TAKE-UP STRAPSFabric with postman slides 18REMOVABLE DRD

Drag Rescue Device

10 COAT LINERNomex® Q8 with Stedair® 3000 viral barrier

4 1.800.323.0244 | www.edarley.com/turnout

TUR

NOU

T GE

AR

Fire Fighting is stressful enough without having to fight your gear too. That’s why we used our experience making Morning Pride brand turnouts that allow the gear to move with the firefighter’s body, not against it. Mobility, comfort, toughness. Ranger Combat Ready Bunker Gear has it all.

Ranger Combat Ready Gear

SPECIFY COAT AND PANT SIZE

Pant Features:

Turnout Sizing

Size Chest Sleeve

Small 36"-38" 33"

Medium 40"-42" 331/2"

Large 44"-46" 34"

XLarge 48"-50" 34"

2XLarge 52"-54" 34"

Coat

Size Waist Inseam

Small 30"-32" 30"

Medium 34"-36" 30"

Large 38"-40" 30"

XLarge 42"44" 30"

2XLarge 46"s-48" 30"

Pants

* For detailed measuring instructions go to

www.edarley.com/turnoutmeasuring

BK207 Ranger Tails™ Coat (Kevlar®/Nomex® OS Gold) $1,024.95BK208 Ranger Pants (Kevlar®/Nomex® OS Gold) $741.95

Tails™ Features:u Kevlar®/Nomex® outer shellu Aralite®/Nomex® thermal liner facecloth u Stedair® moisture barrieru Comfort chinstrapu Coat cuffsu Velcro® zipper closureu Nomex® tabbed long wristletsu Articulating rapid rescue strap with new coatu Lime 2-tone Scotchlite™ reflective triple trimu Radio chest pocketu Half high bellow pocketsu Mic tab

Accessories not included

u Kevlar®/Nomex® outer shellu Aralite®/Nomex® thermal liner facecloth u Stedair® moisture barrieru 1" narrow Velcro® flyu Lime 2-tone Scotchlite™ 3" cuff trimu Kevlar®/Nomex® bellows pocketsu Reinforced knees - Arashield® goldu Dyna-Fit Suspenders

SPECIFY SIZE: S-XXXLBL526 Nomex® Yellow Turnout Coat $853.95BL527 Nomex® Yellow Turnout Pants $554.95BL649 Nomex®/Kevlar® Khaki Turnout Coat $910.95BL650 Nomex®/Kevlar® Khaki Turnout Pants $627.95

Innotex Turnout Gear

Coat Features:u Unique patented BR-1™ 4-layer collar (3")u 32" style coatu Hook and loop 2"x2" throat flapu Zip and hook and loop attachmentu RHL™ rounded hook & loop (U.S patent D627,950)u Left chest radio pocket 8"x4"x2" with mic loop u 2 - Semi bellow 8"x10" pocketsu Inside left pocket with hook & loop attachmentu NFPA style 3" triple trim (lime/yellow with silver center)u Nomex® wristlets with thumb holeu BL649: Flashlight holder (clip with adjustable hook & loop fastener on right chest)

Pant Features:

u Moisture Barrier: GORE® RT7100 moisture barrier – Type 3D, 4.6 oz.u Arashield® reinforcement on cuffs and knees (gray)u Thermal Barrier: Q-8™, 8.0 oz.u BL526 & BL527: Outer shell: Nomex® IIIA, Plain weave, yellow, 7.5 ozu BL649 & BL650: Outer shell: Kevlar® / Nomex® IIIA, khaki, 7.2 oz.

u Hook & D-ring and hook & loop closureu Double Fly Protection: 6 layersu 2 - Semi bellow 10"x10" pocketsu Extra padding in the knee (layer of 14 oz. Nomex® felt)u BL527: Waist adjustment straps in black webbingu BL527: Deluxe heavy duty removable cotton “H” style suspendersu BL650: Waist adjustments with FR plastic bucklesu BL650: Heavy duty quick adjust and removable “H” style deluxe cotton suspenders with padding

Turnout Sizing

Size Chest

Small 34"-36"

Medium 38"-40"

Large 42"-44"

XLarge 46"-58"

2XLarge 50"-52"

3XLarge 54"-56"

CoatSize Waist

Small 28"-30"

Medium 32"-34"

Large 36"-38"

XLarge 40"-42"

2XLarge 44"-46"

3XLarge 48"-50"

Pants

5

TURN

OUT GEAR

www.edarley.com/turnout | 1.800.323.0244

SPECIFY SIZE: S-XL

Proximity Gear

BL852 Proximity Coat $920.95BL853 Proximity Pants $707.95

SPECIFY SIZE: S-XL L540 Complete Approach Suit $1,270.95

Designed for personnel engaged in maintenance, repair and operational tasks in areas of low ambient tempera-ture up to 200°, or high radiant heat up to 2000°. The aluminized glass suit comes with 32" coat, hood with gold reflective faceshield, pants, gloves and boots. Not for fire entry. Ship. wt. 25 lbs.

Aluminized Complete Approach Suit

Aluminized Cover Helmet

AS306 Aluminized Cover Helmet $471.95

The Aluminized Cover Helmet provides all of the improved fit, ride, components and tough “FYR-Glass” shell. “Lite Force Plus Proximity” is certified to meet these new requirements. Ship. wt. 5 lbs.

u Standard “Prox” configuration with adjustable throat protectoru Shroud/earflaps have breathable W.L. Gore moisture barrier and are lined with a “Protective Comfort” quilted FR cotton facecloth thermal liner

Features:

u Gold-coated, 6" faceshieldu Helmet cover

Includes:

Pant Features:

Coat Features:u Outer Shell: Drag Rescue Device in 7oz. aluminized PBI Para/Aramid Knitu Thermal Liner: In Q-8™, inspection openingu Moisture Barrier: Stedair® 3000u Coat Closure: Inner zipper and outer hook and loopu White Nomex® knit wristu Aluminized Kevlar® cuff reinforcementu Additional layer of thermal liner placed on shoulders, elbows, and knees for added protectionu Flashlight hooku Radio pocket 7"x3"x2" with notched flap for antennau 10"x10" patch pocketsu NFPA compliant 1971

u Mid rise pantu Closure inner hook and loop with hook & deeu Black padded suspenders, parachute pull adjustment, with post attachmentu Side cinch take up straps for fine individual size adjustment (2 provided)u 10"x10"x2" full bellows pocketsu Grey leather cuff reinforcementu NFPA compliant 1971

Boots not included

Drag Rescue Device Thermal liner and moisture barrier

High back with H-style suspenders

6 1.800.323.0244 | www.edarley.com/gloves

TUR

NOU

T GE

AR

BH127 Darley Gold Gauntlet Gloves $54.95/pr.SPECIFY SIZE: S-XL, Jumbo

Darley Gold GlovesNow with Gore Protection

Offers unmatched comfort, protection and performance in an NFPA fi re glove Gore RT7100 waterproof, breathable barrier system is the same proven technology used by many of the leading turnout gear manufacturers Every liner is sewn, seam sealed and 100% dunk tested Best in class technology means better dexterity, no liner pull-outs and performance even after exposures in hot structural environments Heavy weight Koala tanned outershell will remain soft after repeated soakings Made in USA

Our new Eversoft glove is made for fi re departments seeking strong, durable hand protection at an unbeatable price. Gloves exceed all requirements of NFPA 1971.

Eversoft Gloves

BL433 Wristlet Eversoft Gloves $55.95/pr.BL434 Gauntlet Eversoft Gloves $47.95/pr.

SPECIFY SIZE: S-XXL

Cowhide, Black Eversoft Split Leather: Ensures long wearing toughness, but with a softer, more comfortable feel SEF Liner: Self-Extinguishing Fleece provides a durable yet soft thermal layer PRO-TECT™ Moisture Barrier Glove Insert: Waterproof and wind resistant Kevlar® thread for high-strength, high-temp security Proudly manufactured in the USA

TRU-3D™ Gloves

BL646 Gauntlet TRU-3D™ Gloves $81.95/pr.BL672 Wristlet TRU-3D™ Gloves $98.95/pr.

SPECIFY SIZE: S-XL

Made of cowhide, elk and kangaroo. The only TRU-3D™ gloves in the fi re service. Your hand isn’t fl at. Your glove shouldn’t be either. Designed by fi re-fi ghters. Gloves meet or exceed the minimum requirements of NFPA 1971.

Full and complete natural leather outer shell Premium Italian top grain cow and swine hide No fabric utilized on outer shell Unequaled wet grip strength Strategic wear and grip pads on fi nger tips/thumb Excellent cut/rip/abrasion resistance Extreme dexterity with no sacrifi ce of protection Glove refuses to harden or stiffen and remains soft and pliable Liner remains intact (no pull out) and is guaranteed Critical palm and back of hand (greater knuckle region) have highest obtainable certifi cation TPP rating of greater than 60 Packaged with versatile reusable utility bag and Velcro® glove strap Certifi ed to latest NFPA 1971 standard (2013 edition)

Advanced multi-layer design reinforces vulnerable areas and features exclusive knuckle guard Fully lined with Kevlar® for added cut resistance Flexible fi nger sidewalls of Kevlar® and Nomex® maximize dexterity NFPA 1971 compliant fi re-retardant moisture and blood borne pathogen barrier Palm layers stitched down with high-burst Kevlar® thread to strengthen grip

Crosstech® Direct Grip® Glove Liner Aluminized PBI®/ Kevlar™ Knit 2-Ply Nomex® Wristlet Breathable NFPA 1976-2000 Compliant

®

Shop online for moregloves 24/7 at

edarley.com/gloves

267_p001-028_TurnoutGear.indd 6 8/26/15 1:55 PM

TURN

OUT GEAR

Alpha X Fire Gloves

u Full and complete natural leather outer shellu Premium Italian top grain cow and swine hideu No fabric utilized on outer shellu Unequaled wet grip strengthu Strategic wear and grip pads on finger tips/thumbu Excellent cut/rip/abrasion resistanceu Extreme dexterity with no sacrifice of protectionu Glove refuses to harden or stiffen and remains soft and pliableu Liner remains intact (no pull out) and is guaranteedu Critical palm and back of hand (greater knuckle region) have highest obtainable certificationu TPP rating of greater than 60u Packaged with versatile reusable utility bag and Velcro® glove strapu Certified to latest NFPA 1971 standard (2013 edition)

SPECIFY SIZE: S-XXL

Pro-Tech 8 Gloves

u Advanced multi-layer design reinforces vulnerable areas and features exclusive knuckle guardu Fully lined with Kevlar® for added cut resistanceu Flexible finger sidewalls of Kevlar® and Nomex® maximize dexterityu NFPA 1971 compliant fire-retardant moisture and blood borne pathogen barrieru Palm layers stitched down with high-burst Kevlar® thread to strengthen grip

Pro-Tech 8's have an exclusive multi-layer knuckle guard system to provide unmatched thermal protection and cut/puncture resistance.

SPECIFY SIZE: S-XXLBL943 Pro-Tech 8 Fusion Gloves $58.95/pr.BL944 Pro-Tech 8 Titan Gloves $76.95/pr.

BL943u Fully knitted 100% modacrylic inner liner for easy on and offu Stays soft and flexible after drying

BL944u 100% Nomex® inner lineru Fully reinforced leather inner cuff

FIREWALL® ARFF Gloves

u Crosstech® Direct Grip® Glove Lineru Aluminized PBI®/ Kevlar™ Knitu 2-Ply Nomex® Wristletu Breathable u NFPA 1976-2000 Compliant

SPECIFY SIZE: S-XXLAW114 FIREWALL® ARFF Gloves $154.95/pr.

BL943

BL944

BL594 Gauntlet Alpha X Fire Gloves $64.95/pr.BL595 Wristlet Alpha X Fire Gloves $68.95/pr.

Additional Aluminized Products (p5)

DON’T MISS

7www.edarley.com/gloves | 1.800.323.0244

8 1.800.323.0244 | www.edarley.com/gloves

TUR

NOU

T GE

AR

Fire Mate™ Leather Gloves

SPECIFY SIZE: S-XXL

Super GlovesA New Era In Fire Fighting Hand Protection

u True 3-D hand-shaped styling with staggered layer seamingu Bubble-Flex and Flex-Tuck constructionu Eversoft black cowhide cuffsu Digiroo™ digital kangaroo grip on palm and fingersu 3-D Air Assist™ thermal liningu Top grain kangaroo leather on backu Durable Crosstech® moisture barrieru Wool 3-D heat guard on the back of hand delivers extra insulationu BG123: NFPA 1971 Edition certifiedu BG124: NFPA 1971, NFPA 1951, NFPA 1999 and NFPA 1992 Edition certified

BG123 Gauntlet Super Gloves $124.95/pr.BG124 Wristlet Super Gloves $125.95/pr.

SPECIFY SIZE: S-XXL

Eclipse Elk Skin Gloves

u Q. Why is Dual Certification important to me?u A. It’s your only guarantee of 13% better puncture resistance, 50% better dexterity, 11% better gripu Palm absorbs up to 1/2 lb. less water weight and stays lightweight and softu Crosstech® glove insert or polyurethane moisture barrieru Certified to meet both NFPA 1971 & high-dexterity NFPA 1951 standardsu Ship. wt. 1 lb.

u Superior overall fitu Swing Thumb™ style and innovative wrap around index finger for excellent dexterityu Unique convertible cuff can be worn as knitwrist or gauntlet styleu Leather retaining band acts as 360° pull tabu 1" longer than othersu Reduced hand fatigue and improved gripu SEF® Modacrylic® lining and moisture barrieru Meets NFPA, OSHA and CAL-OSHA standards u Ship. wt. 2 lbs.

SPECIFY SIZE: S-XXLAM060 Eclipse Elk Skin Gloves $72.95/pr.

BL738 TMAX Gauntlet Gloves $89.95/pr.

TMAX GlovesA Glove That Provides Exceptional TPPThe blend of materials give the TMAX gloves excellent dexterity and comfortable feel. Goatskin palm provides superior guiding mechanism while the cowhide thumb and fingers offer secure grip when working with hoses and ropes. Incorporates Pyrotect® moisture barrier for increased breathability. The published TPP certification results for the TMAX are well above the NFPA standard, with an average 90 TPP rating. This means extra protection without sacrificing dexterity. Certified to NFPA 1971.

SPECIFY SIZE: S-XXL

AS692 Fire Mate™ Leather Gloves $99.95/pr.

9

TURN

OUT GEAR

www.edarley.com/gloves | 1.800.323.0244

Pigskin Firewall® Gloves

SPECIFY SIZE: S-XLAW122 Koala Gloves Knitwrist $77.95/pr.BA002 Koala Gloves Gauntlet $76.95/pr.

Elk/Pig NFPA Gloves

SPECIFY SIZE: S-XL, JumboBD144 Elk/Pig NFPA Wristlet Gloves $89.95/pr.BD145 Elk/Pig NFPA Gauntlet Gloves $87.95/pr.

u Split elk hide and Shelby abrasion- resistant brushed pigskinu Gore™ RT7100 glove barrier fabricu NFPA & CE compliant

u Heavy-weightu Fire retardantu Shelby “Black Line” Nomex® wristlet

u Nomex® knitwristu Vapor barrier (NFPA only)u Gunn cut seamless palm

Koala Gloves

SPECIFY SIZE: S-XL

Wash & Wear Pigskin Firewall® Gloves last 4x longer than others. Outer shell stays soft and supple even after repeated soakings. Gloves come with a sewn-in, breathable, liquid-proof barrier for bacteria and chemi-cals. Meets the highest requirements in terms of durability and abrasion resistance. AC542 and BA003 meet NFPA 1971-2013 Edition. Made in USA. Ship. wt. 1 lb.

AC542 Pigskin Firewall® Gloves, NFPA Wristlet $83.95/pr.BA003 Pigskin Firewall® Gloves, NFPA Gauntlet $81.95/pr.AC543 Pigskin Firewall® Gloves, OSHA Wristlet $52.95/pr.

u Thermal liningu OSHA and NFPA styles available

u Shelby® Koala tanned, split cowhideu Gore™ glove barrier fabricu Fire retardantu Wing thumb

u Nomex® wristletu Breathable barrieru Sewn in liner/barrier systemsu NFPA/CE compliantu Ship. wt. 1 lb.

SPECIFY SIZE: S-XXL

Crosstech® Direct Grip GlovesDurable wash and wear Koala® tanned leather was chosen for the palm for soft, flexible abrasion resistance. The highly engineered insular textile construction for the back of the hand provides thermal and flame resistance with increased pliability for added range of hand and finger motion. The total combination results in a glove with the ultimate in protection and dexterity. This is the only knit back NFPA 1971, 2013 Edition certified glove on the market with three layers of Kevlar® protection! Made in USA.

BL675 Crosstech® Direct Grip Wristlet Gloves $114.95/pr.BL676 Crosstech® Direct Grip Gauntlet Gloves $113.95/pr.

u Crosstech® Film Technology insertu Hi-Tech Kevlar® knit/Nomex® airlocking thermal barrieru 3M Scotchlite reflective tips

10 1.800.323.0244 | www.edarley.com/boots

TUR

NOU

T GE

AR

u 2.2 mm silicone tanned FR full grain, heavy weight leatheru Rugged diamond plated ladder shank area increases tractionu Molded cement outsole with articulating louvers provides additional traction to the medial side of the footu Red no skid pattern helps reduce slippage in wet conditions and releases water from being trapped beneath the outsole

u Pull-on loops are reinforced with extra layer of leather and Kevlar® thread to guarantee them for the life of the boot under normal wearing conditionsu 3M silver industrial wash flame resistant fabric reflective trim (8935) - enhances visibilityu Vibram® FIRE&ICE™ heel guard - Promotes longevity, creates and maintains shape of ergonomically designed heel cupu Vibram® FIRE&ICE™ toe guard - Provides additional grip where you need it and promotes longevity of toe cap

BK159 Fire-Dex® Footwear $329.95

SPECIFY SIZE: 8-11, 12, 13, 14SPECIFY WIDTH: M, W or XW

SPECIFY WIDTH and SIZE: (Uni-Sex)MENS: M or W 7-12, 13, 14 WOMENS: M or W 7-10, 11, 12 BB134 Waterproof Side Zip Boots $106.95

u 8" convenient side zipu Dual density rubber outsole with integrated EVA impact padsu Non-marking rubber, mini-lug outsoleu Safety toe, blood borne pathogen resistant, waterproof and slip resistant

Waterproof Side Zip Composite Safety Toe Boots

More boots inWildland (p29-39)

Rescue Tools (p160-216)

DON’T MISS

Fire-Dex® FootwearProtection for the Heat of the Battle

u Calf-Fit System™: Exclusive calf-fit system™ allows for maximum comfort and fitu Leather Upper: Fire retardant, genuine heavyweight FireTuff™ leatheru Lining: CROSSTECH® fabric with Omaha lining is a high performance, wicking fabric, originally developed for aggressive military applicationsu Lining Construction: Stitch-down “Stroble” lining ensures no liner pull-out and maximum fitu 3-Point Heel Lock System: Exclusive for fit and comfortu 3M Scotchlite™ Reflective Material: Flame-resistant fluorescent and reflective material for added visibilityu Toe Cap Protection: Rubber toe cap for high-abrasion and steel toe HI 500 Oblique Comfort Toe meets or exceeds ASTM standardu Footbed: Tri-density, multi-fit, removable comfort footbed with TPU arch support, anti-microbial, breathable and shock absorptionu Certification: NFPA 1971 for Structural Firefighting and NFPA 1992 for Liquid Splash

Black Diamond X2-Boots

BK274 Black Diamond X2-Boots $328.95

SPECIFY SIZE: 7-11, 12, 13, 14SPECIFY WIDTH: M, W or XW

11

TURN

OUT GEAR

www.edarley.com/boots | 1.800.323.0244

SPECIFY WIDTH and SIZE

u Medium, Wide and Extra Wideu Whole and Half Sizes: 5-13, 14, 15

u Black boulder, waterproof, full-grain, fire-resistant leather upperu Goodyear welt constructionu Vibram® heat, abrasion, cut resisting Kevlar® u Rubber outsoleu Polyurethane insole with removable insertu Superknit liningu Rubber midsoleu Fiberglass shanku Built-in shin guardu Sympatex® Waterproofu Blood borne pathogen resisting membraneu ANSI 175/C75 steel toe EHu Roomier wide toe designu Steel triple ladder shank

Wide Toe Bunker Boots

SPECIFY WIDTH: M,W and XW SPECIFY SIZE: 5-13, 14, 15AW019 Wide Toe Bunker Boots $302.95

AM147 14" Pull-Up Structural Leather Fire Boots $292.95

u Made in the USAu Safety toeu Blood borne pathogen resistantu NFPA - structural firefightingu Waterproofu Vibram® fire sole

Pull-Up Structural Leather Fire BootsYou can depend on the quality and comfort of Thorogood boots - since 1892. All Thorogood structural firefighting boots meet the requirements of NFPA 1971-2013 and are constructed with the features you demand, like long-lasting Vibram® soles and Sympatex® waterproof barriers for blood borne pathogen protection. Other safety features include waterproof, flame and cut resistant leather, electric shock resisting stainless steel plate and thermal barrier. Meets NFPA & ANSI; UL Certified. Ship. wt. 6 lbs.

BG100 14" Power HV Bunker Boots $258.95

Structural - Power HV Bunker Bootsu Upper: Black prime waterproof, flame, and cut-resisting leather abrasion resisting rubber toe and heel protectionu 3M™ Scotchlite™ Reflective Material - highu Construction: Goodyear Storm Weltu Lining: Cambrelle® / Thoro>Tech™ PTFE waterproof barrier, blood-borne pathogen compliantu Insole: Dual density polyurethane removable footbedu Midsole: Rubberu Shank: Steel triple ladder shanku Outsole: Vibram® FIRE and ICE Slip Resisting Soleu Height: 14"u Flexible L-Protection® Puncture- resisting insole materialu Two row wadded leather topu Shaft vapor exhaust ventsu Built in shin guardu Meets NFPA 1971u ASTM F2413-11 M I/75/C/75 COMPOSITE SAFETY TOE. EH Ratedu Tested for and meets CAN/CSA-Z195 electric shock resistanceu Reinforced Leather Pull Straps Visibility Piping.

SPECIFY SIZE: 7-14SPECIFY WIDTH: M, W or XW

12 1.800.323.0244 | www.edarley.com/boots

TUR

NOU

T GE

ARRanger™ Series 6220 ARFF Boots

BK254 Proximity/Bunker Boots $546.95SPECIFY SIZE: 7-13, 14, 15, 16 SPECIFY WIDTH: D, E, EEE

u Height: 14"u Black prime waterproof, flame-resisting, and cut-resisting leatheru StedAir® waterproof, blood-borne pathogen compliant, breathable membraneu Rugged pull straps designed to stay flush against the bootu Shaft vapor exhaust vents help keep feet cool and dryu Wrap-around shin guardu Comfort designed flexible padded instep and Achillesu Ankle lock system keeps ankle firmly in placeu PORON® XRD™ ankle protectionu Non-metallic composite safety toeu Side wall lugs allow for better tractionu UL Certified

SPECIFY SIZE: 7-16 SPECIFY WIDTH: M, W, XW BL617 Knockdown Elite Structural Bunker Boots $332.95

u Reflective high-visibility 3M™ Scotchlite™ piping won’t darken in high temperaturesu Thorogood’s exclusive Vibram™ FIRE and ICE ATS (All Terrain Sole)u Meets or exceeds the requirements of NFPA 1971-2013 Standard on Protective Ensemble for Structural Fire Fighting 2013 Edition; NFPA 1992-2012 Standard on Liquid Splash-Protective Ensembles and Clothing for Hazardous Materials (HAZMAT) Emergencies; and ASTM F 2413-11 M I/75 C/75 PR EH

Proximity / Bunker Bootsu Athletically designed for unencumbered performance and agilityu Specially designed profiled boot to accommodate the largest legs fitting comfortably under proximity pantsu High performance fire resistant and waterproof leather has been independently tested to withstand the harsh environment of JP8 commonly found in ARFF environmentsu Proven for more than 20 years in the fire service, the Goodyear welt is made to withstand the harsh proximity environmentu Improved heel pocket and comfortable molded insert defend against heel slippage while stabilizing and minimizing back and leg strainu Vibram® lug soles with Fire & Ice compound are cemented and security stitched for the greatest protection possible in extreme radiant heat conditionsu Steel bottom plate and shank for complete protectionu Double radiant layers and aluminized shield keep heat transfer away from your feet in high heat conditionsu Full height bootie with 7.5 oz. of Virgin Kevlar® felt quilted to Cambrelle® and laminated to Crosstech®

SPECIFY SIZE: 7-12, 13, 14SPECIFY WIDTH: M or WBL941 Ranger™ Series 6220 ARFF Boots $333.95

14" Knockdown Elite Structural Bunker Boots

The new Ranger 6220 16-inch pull-on proximity boot is the only rubber boot on the market with proximity aircraft rescue firefighting (ARFF) capability. This boot is optimized for premium performance and also cost effectiveness. That means you get outstanding thermal performance in a lightweight boot! These rubber boots are engineered for unmatched protective versatility, comfort, and durability, protecting you against radiant, convective, and conductive heat, as well as hazardous liquids. As with all Honeywell Ranger rubber boots, the 6220 is backed by a robust 24-month warranty (effective from date of purchase) that provides assurance your boots will be free from defects in materials, workmanship, or design.

13

TURN

OUT GEAR

www.edarley.com/boots | 1.800.323.0244

BL662 31" Insulated Hip Boots $164.95

SPECIFY SIZE: 7-14 Whole SizesWIDTH: Medium

31" Insulated Hip Bootsu Steel, toe cap, midsole and shanku Natural rubber compoundu Rugged, rubber outsole, anti-slip, abrasion resistantu Internal mid-way pull on loopsu Wool felt liningu Height: 31"u Non-NFPA certified

®

Shop online for moreboots 24/7 at

edarley.com/boots

Kevlar®/Nomex® Lined BootsInsulated and non-insulated light weight models feature Kevlar®/Nomex® lining and are equipped with a shinguard for additional ladder-rung shin protection. Roomy steel toe provides extra comfort, and steel bottom plates and shanks offer unmatched impact/compression and puncture protection.

BL105 Insulated Kevlar®/Nomex® Lined Model 1500 Boots $184.95BL106 Non-Insulated Kevlar®/Nomex® Lined Model 2500 Boots $179.95

SPECIFY SIZE: 7-151/2, 16SPECIFY WIDTH: N, M, or W

AZ250 sole

AZ248 sole

Hellfire™ Insulated Boots

u Upper: Flame-resisting, heat-resisting rubberu Construction: Vulcanized rubber, shoe fit engineeredu Lining: 3.5 mm polyester needled felt with heel reinforcementu Insole: Removable superknit covered polyurethane footbedu Midsole: Stainless steel, puncture-resisting bottom plateu Shank: Steel triple ladder shanku Outsole: Flame-resisting, heat-resisting white traction lugu Double reinforced pull loops and cushioned shin guardu Light-reflecting instep and heel patchesu Abrasion-resisting rubber T-Toeu Blood-borne pathogen compliant u Meets NFPA 1971 & 1992u ASTM F2413-11 M I/75/C/75 oversized steel toeu UL certified, EH rated

Hellfire™ series provides superior protection for structural and hazmat fire fighting. Ship. wt. 6 lbs.

SPECIFY WIDTH: M, W, XW SPECIFY SIZE: 7-14, 15BB009 Felt-Lined Hellfire™ White Lug Sole $132.95AZ248 Light Insulated Hellfire™ Calendared Sole $182.95AZ250 Insulated Hellfire™ Lug Sole $172.95

BB009

BL617 Knockdown Elite Structural Bunker Boots $332.95

BL941 Ranger™ Series 6220 ARFF Boots $333.95

14 1.800.323.0244 | www.edarley.com/bags

TUR

NOU

T GE

AR

There is plenty of room in this one. It has four pockets along with the main storage area. The end pocket on the left is 8"Wx15"D x17"H, the right pocket is 3"Wx15"Dx17"H, along with two slot pockets. The overall measurements are 33"Lx15"Dx17"H. ID window, handle wrap, and Maltese Cross. Nylon. Red with Maltese Cross. Ship. wt. 3 lbs.

AS037 Jumbo Gear Bag $64.95

B. Jumbo Gear Bag

BK201

BK200 Fire Fighter Gear Bag with Carrying Strap $59.95BK201 Fire Fighter Gear Bag with Wheels $78.95

u One of the biggest gear bags in the industryu Now available with wheels u Overall Size: 29"x17"x16"u Main Compartment: 18"x17"x16"u 4 additional pockets including an extra large helmet pocketu Reflective trim along straps and on bottomu Vented main compartment with Velcro® front closure

A. Fire Fighter Gear Bag

D. X-Large Turnout Bagu Multiple pockets and compartmentsu Padded shoulder strapu Reflective stitchingu Heavy-duty zippersu 600 denier polyester outer shell fabricu Grab-n-go pull strap with grabberu Overall Size: 16"x25"x15"u Side Pockets: 16"x2"x15" u Total Capacity: 7,280 cu. in.

BL429 X-Large Turnout Bag $43.95SPECIFY COLOR: Black or Red

®

Shop online for morebags 24/7 at

edarley.com/bags

Features a zipper top, making it the fastest opening bag on the market. Loading and unloading your gear has never been easier. Made of Cordura® nylon with 11/2" straps held together with Velcro® closures. Ship. wt. 2 lbs.

C. Wide Mouth Darley Gear Bag

BK186 Wide Mouth Darley Gear Bag $59.95

D

A

B

Gear notincluded

u Zip topu Wide mouth openingu Overall Size: 24"Lx17"Hx14"Wu Color: Red with Maltese Cross

C

15

TURN

OUT GEAR

www.edarley.com/bags | 1.800.323.0244

A

B

C

D

A. Alpha Gear Bag

SPECIFY COLOR: Plain Red, Red with Maltese Cross or Royal Blue with Star of Life

B. Darley Turnout Gear Bag

Designed to hold turn out coat, pants, helmet, boots, and miscellaneous equipment. A 11⁄2" web handle supports the weight of the bag’s contents. This bag is 25% larger than the average gear bag on the market. The extra large size measures 131⁄2"x16"x24". Made of heavy Cordura® nylon with a urethane coated back. Has a #10 YKK® self-repairing nylon coil zipper. Logo: Fire Fighter wording only, in gold print. 5,200 cu. in. Ship. wt. 1 lb.

COLOR: Red with Black TrimBK188 Alpha Gear Bag $46.95

Available in two sizes, this bag is designed to hold your turnout coat, helmet, boots and other miscellaneous equipment. Bag features a front outside zippered pocket to carry smaller items. Standard bag measures 131/2"Lx13"Hx24"W. The extra-large gear bag has 25% more room measuring 131/2"Lx16"Hx24"W. Available in choice of plain red, red with Maltese Cross or Royal Blue with Star of Life. Ship. wt. 3 lbs.

BlueRed

AJ093 Standard Turnout Gear Bag $62.95 AJ027 Extra-Large Turnout Gear Bag $76.95

Oversized and loaded with features. Reflective trim, Maltese Cross, handle wrap, optional shoulder strap, vinyl bottom, ID window, zippered side pocket for gloves and personal items. Mesh vents on each side under the storm flaps allow the bag to vent while the flap protects the contents from extreme weather. The three-sided heavy-duty zipper allows you to open the bag and step into your bunker gear and walk away. Measures 16"Wx19"Dx18"H. Nylon. Red with Maltese Cross. Ship. wt. 3 lbs.

D. Walk-Away Gear Bag

AS035 Walk-Away Gear Bag $47.95

BL414 Boot Style Turnout Gear Bag $34.95

C. Boot Style Turnout Gear Bag

u 2" wide nylon webbingu 550 cubic feet largeru Maltese Crossu Lime triple trimu Reinforced bottomu Nylon strap grabberu ID windowu Dimensions: 17"x18"x201/2"

16 1.800.323.0244 | www.edarley.com/bags

TUR

NOU

T GE

AR

C

D

B

A

AW362 Haz-Mat Equipment Bag $66.95

It can be used to hold your hazardous materials clothing or other related items. Has an outside pocket for extra gloves and small items. A 2" web handle helps support the weight. Made of Cordura® nylon. Haz-Mat Equipment in yellow lettering. Ship. wt. 2 lbs.

®

Shop online for morebags 24/7 at

edarley.com/bags

COLOR: Royal Blue

AC537 Darley Nylon Mesh Turnout Bag $32.95

C. Darley Nylon Mesh Turnout BagThe Darley Nylon Mesh Bag’s large size allows you to stuff all your gear into one bag. The heavy-duty, heavyweight, nylon weave poly webbing allows for air circulation. Black mesh with lime yellow straps. Dimensions: 24"x15"x15". Ship. wt. 2 lbs.

BG532 SCBA Carrying Bag $59.95

D. Haz-Mat Equipment Bag

BL430 Premium Turnout Bag with Wheels $129.95SPECIFY COLOR: Black or Red

u Fully molded top, bottom and sidesu Largest zippers availableu Retractable luggage-style handle can be zipped awayu Larger and wider wheels than similar bagsu Rear and bottom are reinforced with diamond embossed waterproof neopreneu Rubber reinforced corners & high-stress areasu Large top flap opens the full length of the bagu Hi-Vis lime-yellow/silver triple reflective trimu Reflective tape stitched into all Firefighter webbing and handleu Embroidered Maltese Cross logo, not screen printedu Larger bag than ANY competitorsu Dimensions: 32"Hx18"Wx18"D

B. SCBA Carrying BagEasy to transport and store, this durable, rectangular SCBA carrying bag features reinforced handles, a shoulder strap, and dual zipper entry. Internal padding protects SCBA and mask. Also features an accessory zipper pouch and internal straps with side release buckle. Dimensions: 30"Lx12"Wx13"H. Ship. wt. 3 lbs.

A. Premium Turnout Bag

17

TURN

OUT GEAR

www.edarley.com/helmets | 1.800.323.0244

BL363

The 1910 features a fiberglass compression molded shell with superior flame and heat resistance, thermal impact cap, ratchet adjustment, and an adjustable headband that fits all SCBA’s. SEI Certified to meet or exceed NFPA 1971, 2007 edition. Ship. wt. 5 lbs.

Helmet shell is reinforced, high-temperature resistant molded fiberglass. Cairns’ patented shell release helps reduce the chance of neck injury by allowing the shell to release, leaving the impact cap behind for protection under severe upward impact. Beneath the shell is a high-temperature foam cap for increased thermal and impact protection. Headband features adjustable front for perfect fit between helmet and SCBA mask and 3-position rear ratchet adjustment. Other features include full brim, high-temperature edge trim, faceshield wing protectors, Nomex® chin-strap with quick-release and postman slide, Nomex® neck/ear protector and 4" Tuffshield faceshield. Helmet fronts sold separately. Meets NFPA 1971, 2013 Edition. Ship. wt. 5 lbs.

SPECIFY COLOR

Cairns 660C Fiberglass Helmet

Fire-Dex ® 911™ Helmet

SPECIFY COLOR

u Colored throughout fiberglass compression molded shellu Fiberglass shell has superior flame and heat resistanceu Thermal impact cap is a low density injection moldu 2 pieces that are inseparableu 6 way overhead suspension straps allowing for a more customized helmet “ride”u 3 piece headband with ratchet assembly for easy adjustments (61/2" - 9")

u Ear/neck cover of black Nomex® lined with FR cottonu 3M™ Scotchlite™ solid lime yellow tetrahedrons trimu Knit sweatband and napeu 4" visor or Innerzone 3™ gogglesu Compression molded fiberglass shell

SPECIFY COLORBL363 Fire-Dex® 1910 Helmet with 4" Visor $260.95BL364 Fire-Dex® 1910 Helmet with Innerzone 3™ Goggles $269.95

BlueWhiteYellowBlackRed

AA843 Cairns 660C Fiberglass Helmet $258.95AF093 Cairns 660C Replacement Faceshield $56.95

AM003 Fire-Dex® 911™ Helmet $180.95

Fire-Dex® 1910 Traditional Style Helmet

The 911® helmet provides solid, dependable, comfortable protection in a multi-tude of environments and still allows for a wide range of vision and long-use. Helmet shell is made of the lightest fiberglass composite offering superior protection against high temperature and chemical hazards. Its unique foam impact insert assembly provides even more top and side protection. Long lasting, easy-to-clean, high-gloss, flame-retardant finish resists scratches and UV rays. Replaceable 4” PPC wrap around face shield features an easy-to-operate tension adjustment and plastic bracket to provide maximum dielectric protection. Meets NFPA 1971, 2007 Edition. Ship. wt. 5 lbs.

Red WhiteYellowBlack

Red WhiteYellowBlack

18 1.800.323.0244 | www.edarley.com/helmets

TUR

NOU

T GE

AR

AW499

AW374

AS354

2-Year Warranty

The FireDome® LT structural fire helmet is the result of 20 years of Bullard engineering, polymer technology and expertise. The Bullard Tough LT comes standard with the all-new and innovative, patented Quick-Attach Blade System, that permits the firefighter to simply press on or off either a blade-mounted faceshield or blade-mounted goggles in seconds. This helmet can also be enhanced with a variety of optically correct visors, goggles, and neck protectors to equip your fire department with complete head, face and neck protection to meet your specific applications. With the new compact design and lower center of gravity, the LT keeps weight evenly distributed and holds the helmet stable on the head. Meets NFPA 1971-2013 Standard. Ship. wt. 5 lbs.

u Compactu Lightweight

SPECIFY COLOR

u Innovativeu Low center of gravity

AW498 FireDome® LT™ Helmet with Faceshield $167.95AW499 FireDome® LT™ Helmet with Goggles $174.95

The FireDome® LT™ Helmet

WhiteBlackLimeOrangeYellowBlueRed

u Change from goggles to facemask in seconds

Comfort and protection is now better than ever. The UST’s outer shell is made with Thermoglas® offering a new standard of toughness and durability without sacrificing comfort. Chipping and cracking found in conventional fiberglass helmets is virtually eliminated while still providing chemical resistance and stability at extreme temperatures. The UST features impact liner, high-heat thermoplastic inner shell, Sure-Lock® adjustable head-band, replaceable and washable brow pad, Nomex® chin strap with quick- release buckle and postman’s slide fastener, Nomex® ear/neck protector, brass eagle, reflective tetrahedrons, and your choice of 4" faceshield or goggles. Meets NFPA 1971-2013 Standard. Helmet fronts sold separately. Ship. wt. 5 lbs.

Firefighters frequently exposed to chemicals and hydrocarbons appreciate the FireDome® FX with a resin-bonded fiberglass outer shell. Fiberglass helmets are more resistant to chemical attack and more stable at extreme temperatures than those made of thermoplastic. Meets NFPA 1971-2013 Standard. Ship. wt. 5 lbs.

FireDome ® PX Helmet - ThermoplasticFirefighters who need a more durable helmet choose the FireDome® helmet with injection-molded thermoplastic outer shell. Constructed with a high-heat thermoplastic providing greater impact and penetration resistance than fiber-glass; plus it’s more reliable with repeated heat exposures. Meets NFPA 1971-2013 Standard. Ship. wt. 5 lbs.

Firedome® Helmets

u Brass Eagle includedSPECIFY COLOR AW373 FireDome® UST Helmet with Faceshield $257.95AW374 FireDome® UST Helmet with Goggles $257.95

u Fiberglass or Thermoplastic outer shellu Urethane foam impact liner provides insulation from heat, impact and penetrationu Chin strap with combination adjustmentu Sure-Lock® Ratchet for easy adjustment

FireDome® FX Helmet - Fiberglass

SPECIFY COLOR (see colors listed above)

SPECIFY COLOR (see colors listed above)AF086 FireDome® FX Helmet with Faceshield $207.95AS354 FireDome® FX Helmet with Goggles $214.95

AF088 FireDome® PX Helmet with Faceshield $211.95AS027 FireDome® PX Helmet with Goggles $214.95

Firedome® UST Traditional Helmet

u Nylon or Nomex® energy- absorbing crown strapu Optically correct faceshieldu Nomex® Ear/Neck Protectoru Inner Shell

WhiteYellowBlackRed

WhiteBlackLimeOrangeYellowBlueRed

19

TURN

OUT GEAR

www.edarley.com/helmets | 1.800.323.0244

u LIGHTWEIGHT - Set of four clips weigh less than 1 oz.u TOUGH - Made from high temp thermoplastic, with 3M™ VHB adhesiveu NECESSARY- Works on any helmet, works with all major head lamp straps, and goggle strapsu ADAPTABLE - Designed to hold BOTH the headlamp strap, and goggle strap securely on any helmetu Designed in the USA

BK390 Double Down (Set of 4 Clips) $7.95

Double Down Helmet ClipsDesigned by Firemen. For Firemen™.

Holds strap securely on any helmet

Morning Pride’s very best modern helmet is the perfect choice for comfort, safe head protection. Ship. wt. 4 lbs.

Lite Force Plus Modern Helmets

SPECIFY COLOR

AR319 Ben Franklin 2 Plus Helmet with Goggles $266.95AR318 Ben Franklin 2 Plus Helmet with Faceshield $262.95BL249 Ben Franklin 2 Plus Low Rider Helmet w/Goggles $266.95BL250 Ben Franklin 2 Plus Low Rider Helmet w/Faceshield $262.95

WhiteYellowBlackRed

Ben Franklin 2 Plus Traditional HelmetsYou can’t beat the combinations of a traditional styled helmet with the strongest outer shell on the market by Morning Pride. Ship. wt. 4 lbs.

u Strongest Shell on the Market - Test show that FYR-Glass is 42% more resistant to impact penetration than helmets made of fiberglassu FYR-Glass Technology - Provides a helmet that is lighter, lower ride, more comfortable and better fittingu High Heat Performance - No other shell finish stands up to high heat like FYR-Glassu Low Ride, Better Fit, Low Center of Gravity - 8-point suspension and wider interior gives wearer superior comfort and fitu More Sizes, More Adjustability - Our headband/ratchet will fit the largest range of hat sizes of any NFPA helmet on the market - plus for position depth adjustmentsu Accessories - Screaming eagle, padded adjustable ratchet system, protective Nomex® earflaps, combo adjustable chin strap, Reflexite® patches. Leather shield not includedu Meets and exceeds NFPA 1971, 2000

u Strongest Shell on the Market - Test show that FYR-Glass is 42% more resistant to impact penetration than helmets made of fiberglassu FYR-Glass Technology - Provides a helmet that is lighter, lower ride, more comfortable and better fittingu High Heat Performance - No other shell finish stands up to high heat like FYR-Glassu Low Ride, Better Fit, Low Center of Gravity - 8-point suspension and wider interior gives wearer superior comfort and fitu More Sizes, More Adjustability - Our headband/ratchet will fit the largest range of hat sizes of any NFPA helmet on the market - plus for position depth adjustmentsu Accessories - Padded adjustable ratchet system, protective Nomex® earflaps, combo adjustable chin strap, Reflexite® trim u Meets and exceeds NFPA 1971-2007

SPECIFY COLORWhiteYellowBlackRed

AR321 Lite Force Plus Helmet with Goggles $202.95AR320 Lite Force Plus Helmet with Faceshield $198.95BL251 Lite Force Plus Low Rider Helmet with Goggles $202.95BL252 Lite Force Plus Low Rider Helmet with Faceshield $198.95

5-Year Warranty

BL249

BL252

20 1.800.323.0244 | www.edarley.com/helmets

Features new tough, through color, reinforced, high-temperature resistant, molded fiberglass composite shell that resists cracking and chipping. Cairns’ patented shell release helps reduce the chance of neck injury by allowing the shell to release, leaving the impact cap behind for protection under severe upward impact. Beneath the shell is a high-temperature foam cap for increased

thermal and impact protection. Headband features adjustable front for perfect fit between helmet and SCBA mask and 3-position rear ratchet adjustment. Other features include high-temperature edge trim,

faceshield wing protectors, Nomex® chinstrap with quick-release and postman slide, Nomex® neck/ear protector and 4" Tuffshield faceshield. Helmet fronts sold separately. Meets NFPA 1971-2007 Edition. Ship. wt. 5 lbs.

SPECIFY COLOR

Cairns 1010 Traditional Style Helmet

AF781 Cairns 1010 Helmet $325.95AF094 Cairns 1010 Replacement Faceshield $60.95

BlueWhiteYellowBlackRed

EV1 Traditional Helmets

u EZ Touch internal face and eye protection with safety locku Black Nomex® 2-layer FR cotton ear coversu EZ Clip replaceable and reversible chinstrap with quick-release and postman slideu Composite fiberglass shellu Large hang-up loopu Bulldog edge beadingu Golden alloy-plated eagle front holderu Anti-catch safety bracket for leather frontsu 8 Reflexite® lime trapezoidsu Certified to NFPA 1971

The progressive interface and cutting-edge features of EV1 helmets offer unmatched performance with a sturdy, sleek, lightweight design that customizes fit for unparalleled comfort and superior functionality. Low-profile design combined with lighter-weight materials provides superior comfort, optimal fit, and improved balance. Proprietary EZ Touch feature allows for one-touch deployment of your face and eye protection. No fuss. No hassle. Stows internally and provides adjustment to fit your face perfectly. Features a safety lock and a cushioned nose guard. EZ Touch face and eye protection is released at the touch of a finger and is the only solution for quick one-hand deployment.

SPECIFY COLORWhiteYellowBlackRed

BL247 EV1 Traditional Helmet $299.95

FoxFire® Illuminating Products

u Increases visibility and positional orientationu Can be charged by any light source (sun, artificial light, low light)u Illuminates up to 17 hours when fully chargedu Glow/illumination serves as a “light emitter”u May be recharged repeatedly by any light conditionu Energy efficient, eco-friendly and no batteries requiredu Made of industrial grade high temperature resistant siliconeu Can withstand high temperatures

Identify your crew in total darkness wit these illuminating tetrahedrons. Patented combination of high-output photo luminescent and extreme reflectivity. High temperature resistance with a strong bonding adhesive backing.

BL227 Helmet Sticker TET (Single) $4.95BL228 Helmet Sticker TET (Set of 8) $37.95BL224 Helmet Bands $22.95

Helmet not included

TUR

NOU

T GE

AR

21

TURN

OUT GEAR

www.edarley.com/turnout | 1.800.323.0244

Try our personalized crescents! Each personalized crescent comes with white background and your choice of color letters (minimum order 25).

Personalized Crescents Crescents

R714 Crescents $3.95/ea.

Crescent Titles

SPECIFY SIZE: 4" or 6". SPECIFY COLOR OF SHIELD, PANEL AND LETTERING. Ask your Darley representative for a Shield Ordering form.

The shield and passport allow fire departments to know the where abouts of their firefighters at all times. Each Passport shield comes with a removable, Velcro® center piece Passport bearing the firefighter’s name. When he takes a position, he removes the passport and places it on the engine. Shields are custom-made and non-returnable. Ship. wt. 1 lb.

Leather Shields with Passport

AR032 Leather Shields with Passport $51.95AR03402 Passport Only $21.95

Authentic Leather Helmet Shields

A variety of shield centers are available at an additional cost. Please ask your Darley representative.

Shield Centers

SPECIFY PERSONALIZED TITLE SPECIFY TITLE

Made the old-fashioned way, these shields combine tightly sewn layers of first rate, 100% genuine leather throughout with meticulous detailing. No other leather shield is finer. Shields are custom-made and non-returnable. Available in both 4" or 6" sizes and your choice of color for shield, panel, lettering and center piece, as well as different configurations. Ask your Darley representative for a Shield Ordering Form. Ship. wt. 1 lb.

SPECIFY COLOR: Lime/Yellow, Red/Orange

AR031 Authentic Leather Shield $48.95AR03401 Center Ornament for 4" Shield $17.95AR035 Center Ornament for 6" Shield $19.95AR036 Center Decal for 4" and 6" Shield $7.95

Scotchlite® Helmet Shapes

Removable Passport

Self-Adhesive Helmet Decals

Rescue, Fire, and Flag DecalsR715 Rescue Decal $3.95R717 Fire Helmet Decal $3.95AF096 Flag Helmet Decal $3.95

AR038 Helmet Bar $18.95/pk. of 16AR039 Helmet Tetrahedron $18.95/pk. of 20AR040 Helmet Diamond $18.95/pk. of 12AR041 Helmet Tetra Bar $18.95/pk. of 12

u White background with black letters

FIREFIGHTERCAPTAINCHIEFDEPUTY CHIEFLIEUTENANTRESCUEASST. CHIEFBATTALION CHIEFCOMMISSIONERPARAMEDICHAZMAT TEAM

FIRST RESPONDERFIREFIGHTER/EMTFIRE RESCUEENGINEEREMTFIRE POLICERESERVEFIRE MARSHALLSAFETY OFFICERVOLUNTEER

AF095 Personalized Crescents $5.95/ea.

22 1.800.323.0244 | www.edarley.com/goggles

TUR

NOU

T GE

AR

Goggles not included

The ESS Nomex® HeatSleeve™ helps protect the goggles from the elements when not being worn, keeping them clean, scratch free, and buffered from heat. ESS recommends this accessory for its Innerzone™ structural goggles.

Nomex® HeatSleeve™

BL011 Nomex® HeatSleeve™ $17.95

WraparoundStrap

BL467

Snap-On/Off™ Mounts

Goggle Clips IncludedESS Innerzone 2™ Goggles

AR306 Innerzone 2™ with Snap On/Off Mounts $57.95

A-Tac ® Firefighter’s Goggles

Innerzone 3™ Wraparound StrapsThe ESS Innerzone 3™ features a wrap-around strap system that secures to structural helmets with two Velcro® tabs. Designed to protect eyes during extrications, USAR, and other hazardous situations that demand primary eye protections. The Innerzone 3™ is fully NFPA compliant, including the 500˚ 5-minute NFPA oven test. NFPA 1971-2013 compliant.

u Functions well with all major structural firefighting helmet designsu Patented Speed Clip™ strap system makes adjustment quick and easyu 2-piece strap system made of 26mm-wide, high-memory woven Nomex®

u Frame made from high heat-resistant materialsu Full-perimeter ventilation and filtration systemu Lenses feature ESS ClearZone™ anti-fog and anti-scratch lens coatingu Lenses provide 100 UVA/UVB protection and precise optical clarity for distortion-free visionu Lenses are highly impact resistant and exceed the impact requirements of ANSI Z87.1-2010+

BC014 Innerzone 3™ with Wraparound Straps $51.95BL467 FirePro1971 FS Goggles $57.95

The ESS Innerzone 2™ is designed to withstand the rigors of structural collapses and other hazardous situations that demand primary eye protection, the Innerzone 2™ is fully NFPA compliant, including the 500˚ 5-minute NFPA oven test. NFPA 1971-2013 compliant.

Protective goggles designed to specifically protect the firefighter in structural, wildland and other emergency situations. A-Tac® firefighter’s goggles pass the NFPA 5000 5-minute heat exposure test. Features a silicone strap and body with hard coated/anti-fog inner and outer lens. Fits over prescription, safety and sunglasses. Can be removed from the helmet, without tools and worn directly on head. Includes goggle clips for both traditional and contemporary helmets. Meets NFPA and ANSI. Ship. wt 1 lb.

u Functions well with all major structural firefighting helmet designsu High heat-resistant mounting brackets carry a lifetime warranty and securely attach to helmet brim, no drilling requiredu Patented Snap-on/Snap-off™ mounting system allows goggles to be stowed on the front or rear of a helmetu Use on helmet alone or together with face shield or flip-downsu 2-piece strap system made of 26mm-wide, high-memory woven Nomex®

u Frame made from high heat-resistant materialsu Full-perimeter ventilation and filtration systemu Lenses feature ESS ClearZone™ anti-fog and anti-scratch lens coatingu Lenses provide 100 UVA/UVB protection and precise optical clarity for distortion-free visionu Lenses are highly impact resistant and exceed the impact requirements of ANSI Z87.1-2010+

AM058 A-Tac® Firefighter’s Goggles $52.95

Helmet not included

BC014

23

TURN

OUT GEAR

www.edarley.com/turnout | 1.800.323.0244

The Gear Keeper is a rugged, retractable gear attachment system, designed to utilize and protect gear in severe environments with maxi-mum break strength and durability. Fully extends to 20" and retracts safely back into place. It’s that easy; no more fumbling, dropping, dangling or damage. Ship. wt. 1 lb.

R726 Bourke Eye Shield $53.95

Shield Saver

Add-A-Clip

AF091 Replacement Faceshield 6" $58.95AF092 Replacement Faceshield 4" $68.95

SPECIFY COLOR: Clear, Smoke, Amber, or High Temp Yellow

Never Lose Your GlovesGlove Strap

SPECIFY COLOR: Red, Yellow, or Black

AR303 Gear Keeper Mic Retractor $21.95

Velcro® Fastener

Gear Keeper Mic Retractor

Bourke Eye Shield

u Keeps gloves ready to use and easy to locateu Strap clips easily onto your turnout gear or bag with nickel plated clipu Secure with heavy-duty Velcro® closureu Ship. wt. 1 lb.

Made of extremely tough polycarbonate plastic. Offers excellent eye and upper face protection, yet won’t trap smoke. Mounts easily and snugly on helmet brim. Lens holders are aluminum, other parts stainless steel. Hinged feature allows instant protection. Uses two brass screws to hold shield to brim. Ship. wt. 1 lb.

6" Faceshieldu Hard-coated polycarbonateu Mounting hardware not included

AS044 Add-A-Clip/Split Ring $8.95AS045 Add-A-Clip/Swivel Snap Clip $16.95AS046 Add-A-Clip/Side Release with Ring $10.95AZ242 Add-A-Clip/Snap Clip $11.95

AS046AS045AS044 AZ242

AJ109 Glove Strap $4.95

u Threaded stud mountu High-impact caseu Patented flushing system salt water proofu Multi-force options

u Convenience Attach your gear right where you need it. Mounts almost anywhere.

u Flexibility Three different clip-options to meet your most demanding applications.

The fast and easy method for attaching turnout gear. Ship. wt. 1 lb.

AW142 Shield Saver $14.95/ea.SPECIFY SIZE: 4" or 6"

4" Faceshieldu Hard-coated PPCu Enhanced opticsu Mounting hardware not included

PX/FX Replacement Faceshields

u Protects both sides of faceshield to prevent scratchesu Reduces eye injuriesu Durable marine-grade vinyl reduces frequency of faceshield replacementu Velcro® closureu Available for 4" or 6" faceshieldsu Ship. wt. 2 lbs.

u Simplicity Do it yourself. Threaded stud mounts easily, penetrates webbing or fabric, screws tight.

24 1.800.323.0244 | www.edarley.com/turnout

TUR

NOU

T GE

AR

More suspenders inWildland (p34)

DON’T MISS

Designed with 8-point attachment. EZ release - just push up with finger or thumb. EZ tighten - just pull down on the EZ to find round rings. Pads are made with FR rated closed cell foam and sewn to allow for adjustment by end user. 47" length. Ship. wt. 1 lb.

BD015 Traditional Suspenders $34.95

BH103 Leather Fireman’s Suspenders 391/2"-451/2" $48.95BH104 Leather Fireman’s Suspenders 391/2"-481/2" $50.95

BG243 EZ Adjust Padded Suspenders $35.95

Leather Fireman’s Suspenders are handcrafted in the U.S.A. with the finest quality.

Materials:u Straps: Polypropylene red, heavy-duty elastic, u 2" wide, .055" thickness, 400 minimum tensile strengthu Attachment Point Elastic: 1/2" wide, double layer, 51/2" long for each of 8 button tabsu Leather Tabs: Eight leather tabs for button attachmentu Leather back patch

Traditional Suspenders

Construction:u Crossover style, heavy-duty elasticu Crossed in rear with leather back patchu 8-point leather tabsu 42" longu All seams double stitched for added strength

EZ Adjust Padded Suspenders

Features your choice of 2" elastic or non-elastic webbing with leather ends. An excellent choice for high back pants. Ship. wt. 1 lb.

H-Style Suspenders

AW116 Elastic Suspenders $26.95AW117 Non-Elastic Suspenders $25.95

u 8-point heavy-duty button attachmentu Extra large “quick adjust” rings to accommodate gloved fingersu “H” back designu Heavy-duty cotton webbingu Foam padded straps

Padded Suspenders

BG568 Padded Suspenders $17.95SPECIFY SIZE: S (36"), M (42"), L (48")

Leather Fireman’s Suspenders

u 10-12 ounce English bridle leatheru Full grainu Drum-dyed

Easy-sealing elastic face opening that stretches to 15" and fits snugly for maximum protection and keeps its shape after repeated usage. Flat seams won’t dig and seamless chin area provides added comfort. Full 13" double layer head for better face and neck

protection. Double 8" back and front bib keeps hood from coming

untucked. One size fits all. Ship. wt. 1 lb.

Darley has teamed with PGI to develop a new standard in hood protection. We’ve selected Para-Tek FR™ as a proprietary Tri-Blend that leverages the benefits of three fibers, high strength Para-Aramid, Lenzing® and High Tenacity Nylon. The end result is a lightweight, breathable hood that offers exceptional flame and heat resistance.

Nomex® Blend Hood

NOTCHED SHOULDERAK020 Nomex® Hood $27.95AK022 PBI Hood $33.95

Meets NFPA Standards 1971 (Current Edition)

Protective Hoods That Go On Easy & Seal Tight

Our Best Hood Deal

AZ152 Nomex® Hood $20.95

Darley Hood

BL577 Darley Hood $26.95

AK020

25www.edarley.com/hoods | 1.800.323.0244

Features easy-sealing face opening that fits snugly for maximum protection and keeps its shape even after repeated usage. Elastic face opening stretches to 15" for easier donning. Flat seams won’t dig and seamless chin area provides for added comfort. Hood is 2-piece construction, notched shoulder with insert. One size fits all. Ship. wt.1 lb.

The new carbon tri-blend Ultra C6 has been engineered to address the concerns and needs in the safety world. Its unique mix of fibers maximizes the inherent performance properties of each fiber to provide optimal protection and comfort. Enhanced comfort adds to functionality and improves performance and efficiency in the workplace. Ship. wt. 1 lb.

With a TPP rating of ~37.4, Carbon Knight hoods have the highest TPP rating on the market - that is 87% higher than the NFPA requirement of 20! Manufactured with a double layer of black thermal knit materi-al, CarbonKnight hoods are wider than the competition, which allows for superior air circulation. CarbonKnight is a tri-blend composition with added Kevlar® for superior strength and durability. Ship. wt. 1 lb.

Meets NFPA Standards 1971 (Current Edition)

Add A Little Color

COLOR: Black

Ultra C6 Hood

BH029 Ultra C6 Hood $32.95

CarbonKnight Hood

COLOR: Black

Protection...Comfort...Function

u TPP rating of 37.4u Meets 18" NFPA minimum requirement

AZ246 CarbonKnight Hood $33.95

u One piece 100% Nomex® thread with notched shoulderu Length: 18", face opening: 5"u Meets or exceeds NFPA 1971- 2013 Edition & is UL certified

SPECIFY COLORAK021 P84 Hood $35.95

TURN

OUT GEAR

u UL/NFPA Compliantu One-piece construction with shoulder insertu 19" overall lengthu One size fits allu Nomex®/Lenzing blend

GreyBlack Navy YellowRed

u Provides double layer coverage of neck, upper chest, shoulders and shoulder bladesu Excellent TPP rating – 34.8 after five washingsu Improved styling for better fit and maximum coverageu Superb flame resistance – lowest vertical char lengths of all hood fabricsu UL classified to NFPA 1971u Comfort and excellent moisture absorbency

26 1.800.323.0244 | www.edarley.com/hoods

TUR

NOU

T GE

AR

BL709

All Pac II hoods meet NFPA and CAL/OSHA standards. Ship. wt. 1 lb.

AS717 Pac II Hood, Old Glory $35.95AS718 Pac II Hood, Convict $35.95AS719 Pac II Hood, Tie Dyed $35.95AZ161 Pac II Hood, Flame $35.95

ONE SIZE FITS ALL

BK363

BK361

BL711

®

Shop online for morehoods 24/7 at

edarley.com/hoods

What’s Hot In Hoods

u NFPA 1971 (current edition) UL Certifiedu Two-piece construction, notched shoulder long bib designu 21" overall length which is 3" longer than NFPA requiresu Longer length will ensure hoods to stay tucked into other PPE - overall smoother fitu Universal size

AW017 AW115

Carbon X Hoods

Non-Flammable:u If exposed to extreme heat or flame, fabric glows but won’t burn u Retains a certain tenacity at temperatures exceeding 2300°F for over 90 sec.

Lightweight Yet Excellent TPP:u 20% lighter than most NFPA compliant hoods u TPP rating of 28

Highest Flame Resistance:u 50% Higher than Nomex®

u 30% Higher than PBI

BK361 Green Camo Hood $42.95BK363 Support a Cure Hood $42.95BK366 U.S. Flag Hood $42.95BL709 Fire Ink PAC F20 Black Ultra C6 Hood with Green Skull $49.95BL710 Fire Ink Troop Power PAC II Hood $49.95BL711 Fire Ink Tiger PAC II Hood $49.95

Pac II Hoodsu Old Glory: Red, White and Blue 100% Nomex®

u Convict: Black and White 100% Nomex®

u Tie Dyed: Multi-colored Nomex® blendu Flame: Multi-colored Nomex® blend

AW017 Ultimate™ Carbon X Hood $42.95AW115 Classic™ Carbon X Hood $33.95

BK366

BL710

27

TURN

OUT GEAR

www.edarley.com/turnout | 1.800.323.0244

Medium, Black: 28"-33" Large, Blue: 34"-40"

Escape Belts

AZ241 Ultra Ladder Belt $181.95BK122 Ultra Ladder Belt with Harness $231.95

H992 Leather Truckman’s Belt $48.95AR308 Equipment Hook $10.95AR309 Equipment Ring $9.95

J922 Life Belt with Pompier Hook only $168.95J923 Life Belt with Pompier Hook, Crash Axe Sheath $190.95

SPECIFY BELT SIZE: XS (36"), S (38"-40"), M (42"-44"), L (46"-48"), XL (50")

Nylon Life Belts Made For Maximum Safety, Durability, Versatility and Comfort

X-Large, Yellow: 42"-50"XX-Large, Red: 52" & up

Waist Size and Color

Made with nylon especially woven to meet rigorous strength, tex-ture and durability requirements. Webbing has a minimum break-ing strength of 9,000 pounds. Assembled belt will withstand 2,000 pounds. The 3" wide buckle strap, sewn with high-tenacity nylon thread and riveted with copper rivets to the 5" wide body strap, is fitted with a double tongue buckle, which enables fast engagement and release of belt. Ship. wt. 5 lbs.

First Kevlar® fire Escape Belt certified to NFPA Class I personal escape harness standards. Waist belt of harness utilizes quick connect “Double Locking” snap hook and D- ring adjuster system. Forged D-ring used for main attachment point has a minimum breaking strength of 5000 lbs., epoxy coated red. Truck/escape belt is constructed of 9000 lbs. Dupont Kevlar® webbing. Kevlar® webbing is coated with a special process to reduce wear and abrasion. Belt is constructed with two layers of webbing to increase stiffness while carrying tools. Contrasting color Kevlar® thread is used to aid in visual inspection. Pad under waist buckle made of black Nomex® material. Belt comes with two additional light weight D-rings that can be adjusted on the rear of the belt to affix a Personal Escape Rope Pack. NFPA (1983/2012 Edition) Certified. Ship wt. 2 lbs.

u AZ102: Escape belt nylon holster can be used for carrying fire axe or halligan tool

X-Large Shown

These lightweight belts provide 4" of Coolmax back padding for wraparound support and keep SCBA from hitting your spine. Carry tools and equipment in any situation without slipping or tangling. D-rings Velcro® up and out of the way when not being used. Belt is made from 3M Scotchlite, flame-resistant, highly reflective material. Adjusts easily to fit over your turnout gear. Features rear carabiner slots, a carabiner and an 18" lanyard. BK122 has the same features as AZ241 with added capabilities of making a ladder belt into a Class II harness by attaching the leg straps. Exceeds NFPA for escape belts. Color coded by size for quick identification. Ship. wt. 2 lbs.

Pac Mule Ultra Ladder Belt The Ultimate Hands-Free Truckman’s Belt Designed by Firefighters AZ100 NFPA Kevlar® Escape Belt $136.95

AZ101 Nylon Escape Belt $94.95AZ102 Fire Tool Holster for Escape Belt $32.95

SPECIFY SIZE: L (34"-54"), XL (44"-68")

BK122

Leather Truckman’s Belt

Hook

The traditional firefighter’s Truckman’s belt now has an improved design; use it for just about anything. Constructed of top-grain leather, measures 11/2" wide and is fully adjustable. Includes heavy-duty snap hook and 2 heavy-duty rings. Folds are riveted as well as stitched for durability. All hardware is chrome plated brass. Optional equipment hook and ring are easily added with secure screw rivets. Ship. wt. 3 lbs.

Ring

SPECIFY SIZE

28 1.800.323.0244 | www.edarley.com/turnout

TUR

NOU

T GE

AR

AW285 Universal Radio Holder $27.95AW286 Leather Radio Strap $26.95BH101 Anti-Sway Strap $8.95

BG507 Bunker Belt® (Specify Attachment Strap Color: Black or Red) $48.95BG504 Pocket Tool Fold with Flap $21.95

Ladder Hook Extension allows the rescuer to attach themselves to a ladder rung or tower platform. Overall length of 18" provides the perfect length to give the rescuer both comfort and safety. NFPA requirements mandate a maximum overall length of 18". Easy-to-operate double locking snap hooks are located at each end of the strap. The XL hook on one end will open to 2.5" to accommodate any ladder rung. The small end of the Ladder Hook Extension attaches to the D-ring constructed of Kevlar® webbing. Available with steel or aluminum alloy hooks. Strength: 5,000 lbs. Ship wt. 2 lbs.

AZ103 Ladder Hook Extension (Kevlar®) with Steel Hooks $69.95AZ104 Ladder Hook Extension (Kevlar®) with Aluminum Hooks $97.95

Bunker Belt®

Transporting PPE Gear Made Easy!

Universal Radio Holder

SPECIFY COLOR and INSCRIPTIONAF084 Accountability Tags $9.95/ea.

Ladder Hook Extension

Firefighters’ personalized durable plastic I.D. tags. Various colors available for customizing your emergency system. Heavy-duty trigger snap attaches to turnout gear. A simple system for satisfying accountability requirements of the fire service. Comes inscribed with Fire Department Name, Firefighter Company Number and Firefighter Name all in white letters. Yellow and white tags come with black lettering. Ship. wt. 1 lb.

Personalized Accountability I.D. Tags

BG507

BG507

AW285

BH101

Three-part system (sold separately) mates comfortably with scissor snaps and D-Rings. The radio holder is universal to fit most radios and the anti-sway strap was designed to keep your radio on a tether and reach at all times.

u 11/4" wide and made of heavy duty leatheru Speaker mic attaches to a leather loop for easy accessu Strap can be used on either shoulderu Scissor snaps on both ends of the Anti-Sway strap allow for easy placement on your rig keeping your radio in reach at all timesu Designed to securely fits most radiosu 2 elastic cords help secure the radio while 2D-Rings allow it to mate with the Radio Strap

AW286

BG504 - Sold separately. Tools not included.

The Bunker Belt® System is your bag without a bag. The Bunker Belt® enables fire fighters to easily assemble all their gear on the Bunker Belt®, including boots, bunker pants, coat, helmet, tool bag, face mask bag, gloves and any other items you want to attach. Assemble all your gear in less than 60 seconds and deploy your equipment for calls in less time. Made in the U.S.A.

u 2" heavy and super heavy weight webbingu Red or black attachment strap with 4 carabinersu Shoulder strap with rubber comfort padu Quick-release buckles for fast deploymentu Boot strap with custom slide and keeper for easy adjustment

28