Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ......

19
Copyright © 2013 The Crosby Group LLC All Rights Reserved 464 Custom Design Product Whether your need is for a variation of an “off the shelf” items, or for a “special engineered design” product, Crosby ® is your source. Although we specialize in “Heavy Lift” solutions, we can provide the product required to meet any demanding application. For example, since its beginnings (1925), custom designed tackle has been commonplace in the everyday manufacturing process at McKissick ® . By combining the experience of our technical support team, our research and development team, our engineering team and our manufacturing team, we are capable of designing and fabricating tackle for any special application. 34,000 lbs. McKissick ® 1,000 ton RP Traveling Block The ability to provide specials has long been a strength of Crosby ® .

Transcript of Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ......

Page 1: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

464

Custom Design Product

Whether your need is for a variation of an “off the shelf” items, or for a “special engineered design” product, Crosby® is your source. Although we specialize in “Heavy Lift” solutions, we can provide the product required to meet any demanding application. For example, since its beginnings (1925), custom designed tackle has been commonplace in the everyday manufacturing process at McKissick®. By combining the experience of our technical support team, our research and development team, our engineering team and our manufacturing team, we are capable of designing and fabricating tackle for any special application.

34,000 lbs.McKissick® 1,000 tonRP Traveling Block

The ability to provide specials has long been a strength of Crosby®.

Page 2: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

465

Sp

ecia

lP

rod

uct

s

The Heavy Lift Specialist

Special “Heavy Lift” hardware was required to place the 1,200 metric ton support towers for the new Bay Bridge that connects San Francisco and Oakland. Crosby was chosen, and supplied eleven components that helped to make up the lifting system.

The Crosby products designed for the Highly demanding job included:

• One1,250metrictonMcKissick®S-2Jaw&Jawswivel - Over 3 metres. in length, the swivel weighed over 5443 kg. and has a design factor of 5 to1.

• Two1,250metrictonMcKissick®hangersplates-The two hangers have a design factor of 5 to 1.

The lift also included two standard 800 metric ton G-2160 Wide Body shackles (1306 kg. each) and six 600 metric ton G-2160 Wide Body shackles (817 kg. each). Each shackle has a 4.5:1 design factor.

Crosby... The Heavy Lift Specialist.

Page 3: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

466

Special Products

5534 kg. McKissick® Riser Pull-In Fairleader Block

McKissick® Domed reinforced roll forged sheaves are available in sizes 610mm and larger, with bearing styles that best fit your extreme duty applications.

4853 kg.McKissick® Riser Pull-In Vertical Block

Page 4: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

467

Sp

ecia

lP

rod

uct

s

Crosby® Testing

Glossary Of Terms For Testing And Third Party Certification

American Bureau of Shipping - (ABS)American Bureau of Shipping is a third party certification agency. ABS publishes several guidelines for various lifting applications. Some of the most common “lifting” guidelines include the following.

•GuideforCertificationofCranes•RequirementsforCertificationofConstructionandSurveyofCargoGearonMerchantVessels•GuidefortheCertificationofDrillingSystems

(This is not intended to be a complete list of guidelines published by ABS.)A common request is for ABS third party witness of proof test and magnetic particle inspection after proof test.Depending on the type of certification, requirements may include design review, materials testing, non destructive testing, proof load and special packaging.When specifying ABS certification, it is necessary to know to which guideline the product is to be certified (i.e., Guide for Certification of Cranes, etc.).

Det Norske Veritas - (DNV)Det Norske Veritas is an independent foundation established in 1864 for safeguarding life, property and the environment. Along with inspection and advisory services, DNV provides the following three types of certification services.Classification - Certification based on DNV Rules or Certification Notes.Statutory Certification - Certification under authority granted by National Authorities (i.e., NPD,UK-HSE, Canada, Australia, etc.) according to acts, regulations, statutory instruments given by Statutory Authorities.Conformity Certification - Certification to client specifications, National Standards or recognized codes. Some of the most common DNV certification rules for lifting are:

•RulesforCertificationofLiftingAppliances•CertificationNotesNo.2.7-1OffshoreContainers•RulesforClassificationofMobileOffshoreUnitsPart6,Chapter5.

(This is not intended to be a complete list of DNV Rules.)Lifting products may require design review, materials testing, non destructive testing, DNV issued Proof Test Certificate (CG3) and DNV issued Certificate of Conformity (C of C).Type approved products with a Manufacturer’s Survey Agreement (MSA), require all the above except: Design Review, DNV issued Proof Test Certificate (CG3) and DNV issued Certificate of Conformity (C of C). For products certified to 2.7-1 Specification (Offshore Containers), DNV witnesses proof test and issues theirProof Test Certificate (CG3) and Certificate of Conformity (C of C) to the distributor responsible for building the container set. It is the distributor’s responsibility and cost to contact DNV.When specifying DNV certification, always specify one of the three types of services, and if it is a DNV Rule, which Rule is applicable (i.e., Rules for Certification of Lifting Appliances, etc.).

American Petroleum Institute - (API)Established in 1919, API writes specifications that are published as aids for the procurement of standardized equipment and materials, as well as instructions to manufacturers of equipment or materials covered by an API specification. Some of the common specifications written by API for “Lifting” are:

•SpecificationforDrillingandProductionHoistingEquipment(APISpec8A)•SpecificationforDrillingandProductionHoistingEquipment(APISpec8C)•SpecificationforOffshoreCranes(APISpec2C)•SpecificationforWireRope(API9SpecA)•SpecificationforQualityPrograms(APISpecQ1)

A standard to which a manufacturer’s quality system must comply in order to state that products are manufactured to API requirements, resulting in permission to apply the API monogram.When specifying API, it is necessary to know to which API Specifications the product is to be certified (i.e., Specification for Drilling and Production Hoisting Equipment (API Spec 8A), etc.).

Lloyd’s Register of Shipping A society established in 1760 and recognized under UK laws and to provide third party assurance of compliance to plans, specifications, rules, codes and fitness of use by approving designs, surveys and reports. Lloyd’s Register acts on behalf of clients and governments to verify products conform to statutory requirements and provides inspection and advisory services to clients.Some of the most commonly used Lloyd’s Register certification types include the following.

•CodeforLiftingAppliancesinaMarineEnvironment•RulesandRegulationsfortheClassificationofShips•RulesandRegulationsfortheClassificationofMobileOffshoreUnits•ContainerCertificationScheme

Page 5: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

468

Crosby® Testing

Glossary Of Terms For Testing And Third Party CertificationLloyd’s Register of Shipping continuedA common request is for Lloyd’s Register Witness Proof Test and Magnetic Particle Inspection with Certification. However, certification may require design review, material tests or product verification to statutory or customer requirements.When specifying Lloyd’s Register of Shipping certification, know the code, standard, statute or customer requirement (i.e., Code for Lifting Appliances in a Marine Environment, etc.).

Federal Specifications & Military StandardsThe Federal Specifications & Military Standards’ documents specify dimensional, performance and test requirements for products. Some specifications define particular testing that is not normally performed on standard items. Crosby products, when identified in the latest Crosby General Catalog, will meet the requirements when tested by the party awarded the government contract. Certification is usually covered by a Crosby Standard Certificate of Conformance.

ISO 9001A standard defining a manufacturer’s or service organization’s Quality Management System requiring third party certification. ISO 9001, the most comprehensive ISO certification level, involves the design, development, production and shipping of prod-ucts. ISO 9001 requires that all procedures, work instructions, processes and additional activities be documented.

Attainment of ISO 9001 forms the basis for meeting other world standards and provides customers with documented proof of Crosby’s ability to consistently provide product quality and performance.

National Association of Chain Manufacturers (NACM)A U.S. Standard specifying dimensional and performance criteria for graded chain.

American Society for Testing and Materials (ASTM)American Society for Testing and Materials, established in 1898, is the largest voluntary standards development system in the world. ASTM Standards cover:

Inspection Methods (Certificates Required) — i.e., Magnetic Particle, Ultrasonic, Dye Penetrant, X-Ray, Hardness, etc.Processes (Standard Certificate of Conformance) — i.e., Hot Dip Galvanizing, Electroplate, Mechanical Galvanizing,etc.Material Properties (Tensile Test Report Required) — i.e., Specification for Steel Forging, Carbon and Alloy for General

Industrial Use (A668), Specification for Steel, Closed-Impression Die Forgings for General Industrial Use (A521), etc.Material Test Methods — Covers Tensile and Charpy impact test specimens and test methods. i.e., Test Methods of Tension

Testing of Metallic Materials (E8), A370 Test Methods and Definitons for Mechanical Testing of Steel Products (A370), etc.

American National Standards Institute (ANSI) American National Standards Institute established in 1916 develops product specific performance standards for items such as cranes, hooks, slings, screw threads, etc., usually covered with a standard Certificate of Conformance.

Crosby Standard Testing Upon Request*Crosby Proof Test with Third Party Witness —Receiveloadtestcertificationsigned,documentedandserialnumbertraceabletotheseagencies:ABS,DNV,Lloyds,B.V.,RINA,GermanischerLloyd,etc.*Crosby Proof Test with I.L.O. Certificates —StandardloadtestperformedanddocumentedonInternationalLaborOrganizationForm4(I.L.O.Form4).Certifiedandtraceablebyserialnumber.ThecertificatesaremaintainedatCrosby.CrosbyStandardCertificateofConformance—Partnumber,description,dateandstatementofconformitytoCrosbyliteratureavailableattimeofmanufacture.*Crosby Magnetic Particle Inspection with Certification — ASTME-709wetordrymethodstandardatCrosby.Customercanrequireothertypes.Certifiedandtraceabletoserialnumber.*Crosby Ultrasonic Inspection with Certification — ASTMA-609forcastings,ASTMA-388forforgingstandardatCrosbyCustomercanrequire othertypes.Certifiedandtraceabletoserialnumber.*Crosby X-Ray with Certification — Customerprovidesx-raytechniqueandlevelofacceptance.*Crosby Dye Penetrant Inspection with Certification —AliquidpenetrantexaminationtoASTME-165.OthertypesofDyePenetrantcertificationisavailableattimeoforder.Certifiedandtraceabletoserialnumber.*Crosby Material Tensile Test with Certification — TensiletestperformedperASTMA370.TestreportdocumentsTensilestrength,YieldStrength,Elongation,andReductionofArea. Crosby Material Chemical with Certification — ChemicalcertificationprovidedbysteelmillorfoundryTraceabletoheatnumber,heatlettersandPICcode.*Crosby Charpy Impact Test with Certification — ImpactTestperASTMA370orASTME8attemperature,location,andenergyabsorbedrequirementasdefinedbycustomerorapplicablespecification.

*Achargewillbeapplied.Crosbycertificationisavailablewhenrequestedattimeoforder.

Theitemslistedaboveareforstandardcertification.Additionalcertificationisavailableandmustberequestedattimeoforder.

Page 6: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

469

Sp

ecia

lP

rod

uct

s

Crosby® Custom Design Hooks

CROSBY CUSTOM MACHINED SHANK HOOK & NUTQUOTATION REQUEST FORM

Customer Name: Date:

Address:

City: State: Zip Code: Country:

Phone: Fax:

Customer Contact Name:

Quotation Due Date: Product Delivery Date:

Crosby / McKissick Proposal Number: Quantity:

Dimensions:

Frame Size and material Symbol:

Working Load Limit (tons)

A. Round or Hex Nut

B. E.*C.* F.

D.

Hook Latch Kit __________ SS-4055 Flipper latch__________ PL Flapper latch__________ 4320 Latch

* The minimum thread length engaged in the nut should not be less than one (1) thread diameter.

For additional information concerning customer design products, contact:In U.S.A. - Crosby’s Special Engineered Products Group at 1-800-777-1555In Canada - Crosby Canada at (905) 451-9261In Europe - N.V. Crosby Europe at 32-15-757125 (26)

Page 7: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

470

Custom Split-Nut Hook for Mobile Cranes

Customer Name: Date:

Address: City, State, Zip Code:

Phone: Fax:

Customer Contact Name: Quantity: Requested Delivery Date:

- INTERNAL USE ONLY - Crosby / McKissick Proposal Number:

Crosby McKissick® patented (U.S. Patent 7,000,905 and 7,293,763) Split-Nut Hook Retention System featured on McKissick® crane blocks makes inspection easier. The hook can be disassembled, inspected and put back into service in a fraction of the time of a conventional threaded nut.

Available Configurations

319 Hook Type and

Working Load Limit 4:1

Alloy(t)

Crosby Hook ID

Code

“A” Available

Shank Dia.“B”

Dimension“C”

Dimension

“D”Maximum

Grip Length

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

15 L 1.75 44.4 1.62 41.1 3.25 82.5 5.38 137

22 N 2.00 50.8 1.62 41.1 3.50 88.9 5.38 137

30 O 2.50 63.5 2.31 58.7 4.38 111 15.69 398

37 P 2.50 63.5 2.31 58.7 4.38 111 21.69 551

45 S 3.00 76.2 2.75 69.9 5.50 140 21.25 540

60 T 3.00 76.2 2.75 69.9 5.50 140 23.25 591

75 U 4.00 102 3.75 95.2 7.50 190 19.25 489

Steps to fit your block with the patented McKissick®Split-Nut Hook Retention System

1. Measure side plate to hook tip clearance and record in box “G” below. (The net length “H” dimension may be affected by holding the “G” dimension. If there is adequate clearance at tip of hook, the net length “H” dimension may be the dimension to specify).

2. Remove hook and thrust bearing from existing crane block.3. Measure shank diameter and record in box “A” below.4. Measure nut thickness and record in box “B” below. The standard “B”

dimension (shown above) is a minimum and will be utilized unless actual measured “B” dimension is required.

5. Measure nut diameter and record in box “C” below. The standard “C” dimension (shown above) is a minimum and will be utilized.

6. Measure thrust bearing thickness and record in box “E” below. If known, record thrust bearing manufacturer and stock number below.

7. Measure trunnion thickness through the hook shank hole and record in box “F” within 1/32”.

8. The required grip length “D” will be the addition of the “E” and “F” dimensions plus 0.06” for running clearance.

9. Determine the required hook size based on shank diameter and tonnage. Other shank /hook / tonnage combinations may be available. Your supplied information will be reviewed for the Split-Nut application.

10. Complete the form and forward to your local Authorized Distributor for quotation.

Thrust Bearing Standard

ShankØ

Bearing Outside Dia.

Bearing Thickness

BearingDescription(in.) (mm) (in.) (mm) (in.) (mm)

1.75 44.4 3.266 83.0 0.938 23.8 T-176

2.00 50.8 3.672 93.3 1.062 26.9 T-202

2.50 63.5 4.375 111 1.063 27.0 T-251

3.00 76.2 5.250 133 1.313 33.4 T-301-W

4.00 102 7.000 178 1.750 44.4 40-TP-114

Required Dimensions

Frame Code or other distinguishable size designator: Material Type: Check One: Carbon Alloy

Working Load Limit: Check One: Tons Metric Tonnes Thrust Bearing Identification:

Check One: Check One: Hook Latch KitCheck One: SS-4055 Flipper latch PL / PL-N Flapper latch S-4320 Latch

For personnel hoisting applications, only a PL, PL-N or S-4320 shall be utilized.

Dimension A: (in.) (mm) Dimension E: (in.) (mm)

Dimension B: (in.) (mm) Dimension F: (in.) (mm)

Dimension C: (in.) (mm) Dimension G: (in.) (mm)

Dimension D*: (in.) (mm) Dimension H: (in.) (mm)

*D = Bearing Thickness “E” + Trunnion Thickness “F” + .06” running clearance.

For additional information concerning customer design products, contact:U.S.A. - Crosby’s Special Engineered Products Group at 1-800-777-1555Canada - Crosby Canada at (905) 451-9261Europe - N.V. Crosby Europe at 32-15-757125 (26)

Page 8: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

471

Sp

ecia

lP

rod

uct

s

Crosby® Custom Design HooksMcKissick® Duplex Hook Assemblies

•Cast alloy steel.•Available in forged steel upon special request.•Can be machined to optional dimensions upon request.•Furnished complete with two flipper latches.•The working load limits shown are in short tons and applicable for loading up to an included sling angle of 90

degrees. For included sling angles up to 60 degrees, the hooks can be rated in metric tons.

Duplex Hook with Nut and LatchesDimensions

(mm)Stock No.

Hook Assembly

Size(tons) A B C D E F G H J K L M N O

Weight Each(lbs.)

ReplacementLatch KitStock No.

127384 25 63.5 102 63.5 76.2 191 109 88.9 349 38.1 82.6 52.3 69.9 3.05 63.5 28 1090143126802 50 76.2 124 76.2 82.6 254 104 127 470 50.8 108 71.4 95.3 6.35 88.9 62 1090189137373 75 102 191 102 102 343 203 165 635 63.5 140 84.1 117.4 6.35 114 141 1090223137364 100 127 229 127 140 406 229 229 762 76.2 171 96.8 127 6.35 127 241 1090223137266 125 127 229 127 140 483 254 229 800 76.2 191 109 133 6.35 127 383 1090223137355 150 152 254 152 152 483 254 229 800 76.2 191 109 133 3.05 127 383 1090223137346 200 178 305 152 210 521 324 267 927 88.9 203 122 172 6.35 152 492 1090241137337 250 203 356 178 229 603 356 298 1016 95.3 222 130 203 6.35 178 742 1090241137328 350 203 394 203 254 610 406 305 1149 108 260 182 241 6.35 229 1199 143080

2022897 500 254 457 210 425 673 470 311 1143 114 254 182 241 6.35 229 1497 8022575*137319 600 254 457 210 222 635 457 356 1295 127 279 202 248 6.35 229 1415 143071

+2031520 1000 305 584 254 559 927 730 406 1765 114 432 273 368 — 292 3538 8015361*

Ultimate Load is 4 times the Working Load Limit. * Bolt style latch.+ 1000 ton has different prong profile than shown.For the purpose of calculating D/d ratio, utilize dimension O.For additional information concerning custom design products, contact:In U.S.A. — Crosby’s Special Engineered Products Group at 1-800-777-1555, Fax (918) 834-5035.In Canada — Crosby Canada at (905) 451-9261.In Europe — N.V. Crosby Europe at 32 15 757125 (26).

Page 9: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

472

Crosby® / Bullard® Golden Gate® HookHOOK DATA FORM

Hook Size: Name of Person Completing Form:

Sales Order:

Working Load Limit (Tons) Telephone:

Hoist Name and Model: Distributor:

Top Hook Bottom Hook Distributor P.O.:

Is Self-Closing Gate Required? Yes No Accurate dimensions are important. If you have any questions, contact your authorized Crosby Distributor.

Shank Length1. Measure total USABLE shank length from top of

hook shank to top of gate assembly. Gate assembly is not considered part of the USABLE shank. When measuring other manufacturer’s hooks, measure from the top of the hook shank to the hook shoul-der.

2. Measure threaded portion (enter BLANK if threads not required). NOTE: Hook is supplied with Steel Hex-Load Nut and Bronze Load Washer. Hook and Nut threads areNational Coarse. If a SPECIAL Load Nut or Load Washer is required, attach a drawing to this form.

Shank Diameter3. Measure width of threaded portion.4. Measure width of blank portion.

Throat Opening5. ONLY measure throat opening if this distance is

critical to customer’s operation.

Cross Hole in Shank Hooks(complete only if required)6. Measure shank length from center of hole to top of

gate assembly.7. Measure diameter of hole.

Coupler

Hook size 11, 12, or 14 may require coupler as shown.

Length of Projection

Distance Between Plates

Page 10: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

473

Sp

ecia

lP

rod

uct

s

Crosby® Swivel Hoist Ring Data FormSpecification sheet for Crosby HR125 & HR125M Hoist Rings

with optional bolt lengthsDate:

CG #: Crosby Quote Number:

Customer #: Contact:

Distributor’s Names: Distributor’s Fax Number:

Distributor’s Phone Number: Quantity Requested:

Distributor’s P.O. # Distributor’s P.O. #

1. Determine the TypeofThreads required on the Hoist Ring - Metric or UNC, UNF, Etc. NOTE - NOT DESIGNED FOR PIPE, ACME OR TA-PEREDS THREADS.

2. Determine the WorkingLoadLimit of the requested Hoist Ring.

3. Determine BoltDiameter - The diameter of the required bolt.

4. Determine Effective Thread Length -This is the length the threads must be in order to fully en-gage, or project through, the work piece. NOTE; If the Effective Thread Length is not known, the Length of Bolt is required.

5. Determine LengthoftheBolt- The over all length of the bolt as measured from under the head of the bolt. NOTE: If the Effective Thread Length is not known, the Length of the bolt is required.

6. #ofThreadThreadsperInch(LengthBetweenThreadsforMetricthreads) - This information is required to ensure we ship proper bolt size (i.e., 1/2 - 13, 7/8 - 9, 8 x 1.25, etc.).

1. Thread Type (Circle One) U.N.C. Thread Metric Thread Other (NOT DESIGNED FOR PIPE, ACME, OR TAPERED THREADS)

2. Hoist Ring Capacity (Working Load Limit) ____________________lbs. Kgs.

Page 11: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

474

McKissick® Custom Lead Sheaves

Customer Name: Date:

Address:

City: State, Zip: Country:

Phone: Fax: E-Mail:

Customer Contact Name: Quantity:

SHEAVE INFORMATIONSheave Diameter:__________Wire Rope Size:__________Number of Sheaves:__________BEARING TYPE Bronze Bushing Roller Bearing Tapered Roller Bearing OtherBLOCK INFORMATIONStyle: Vertical HorizontalDimensions: A. __________ B. __________ C. __________ D. __________APPLICATION INFORMATIONLine Speed: __________ Single Line Pull: __________ Degree of Wrap: __________Environment: ____________________________________________________________________________FREQUENCY OF USEContinuous: __________ Intermittent: __________ One Time: __________SPECIAL REQUIREMENTSSpecial Testing: __________________________________________________________________________Finish: __________________________________________________________________________________Third Party Inspection / Approval:(If 3rd Party Inspection or Approval is required, please refer to page 467-468.)

Vertical Deck Guide Horizontal Deck Guide

Page 12: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

475

Sp

ecia

lP

rod

uct

s

McKissick® Custom Sheaves

DIMENSIONAL INFORMATION

Nominal Outside Diameter: ____________ Wire Rope Size: ____________ Rim Width: ____________

+ Shaft Size: ____________ * Hub Width: ____________

Nominal Tread Diameter (Optional): ____________ Nominal Hub Diameter (Optional): ____________+ Shaft size is bore size on Plain Bore Sheaves.* Hub width is measured over the cone of the Tapered Bearing Sheaves.

Customer Name: Date:

Address: City: State, Zip:

Phone: Fax: E-Mail:

Customer Contact Name: Quantity:

BEARING TYPE q Bronze Bushing q Ball Bearing

q Tapered Roller Bearing q Finish / Plain Bore

q Roller Bearing (requires hardened and ground shaft) q Underwater

q Full Complement Double-Row Cylindrical q Other q Roller Bearings with Seals

MATERIAL TYPE q Roll Forged (Flame hardened 14” (356mm) and larger) q Forged Steel

q Cast Steel q Domed

q Fabricated q Other

APPLICATION INFORMATION

Line Pull: _________________ Fleet Angle: ________________ Degree of Wrap: ____________________

Line Speed: _______________ Environment: _______________ Groove Angle: ______________________

SPECIAL REQUIREMENTS

Special Testing: _____________________________________________________________________________

Finish: ____________________________________________________________________________________

Third Party Inspection / Approval: _______________________________________________________________(If 3rd party inspection or approval is required, please contact Crosby Customer Service.)

NOTE: Crosby manufactures sheaves in a wide array of styles and sizes. See page 271-298.

Page 13: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

476

McKissick® Custom Bridge Crane BlocksCustomer Name: Date:

Address:

City: State, Zip: Country:

Phone: Fax: E-Mail:

Customer Contact Name: Quantity:

SHEAVE INFORMATIONSheave Diameter:__________Wire Rope Size:__________Number of Sheaves:__________BEARING TYPE Bronze Bushing Roller Bearing Tapered Roller Bearing Other

BLOCK INFORMATIONDimensions: A. __________ B. __________ C. __________ D. __________Working Load Limit: __________CMAA Rating: __________LOWER FITTING TYPE Single Point Hook Duples Hook Swivel Hook Latch Other

APPLICATION INFORMATIONOverhaul Weight Requirements: ___________Lead Line Speed: __________Environment: __________SPECIAL REQUIREMENTSSpecial Testing: __________________________________________________________________________Finish: _________________________________________________________________________________Third Party Inspection / Approval: ____________________________________________________________(If 3rd Party Inspection or Approval is required, please refer to page 467-468.)

Four Position Locking Mechanism Other (Specify)

Page 14: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

477

Sp

ecia

lP

rod

uct

s

McKissick® High Capacity Snatch Blocks

Customer Name: Date:

Address: City: State, Zip:

Phone: Fax: E-Mail:

Customer Contact Name: Quantity:SHEAVE INFORMATIONSheave Diameter: __________ Wire Rope Size: __________ Number of Sheaves: __________

BEARING TYPEq Bronze Bushing q Roller Bearingq Tapered Roller Bearing q Other

BLOCK INFORMATION

Working Load Limit:__________

Fitting Type

q Single Point Hook

q Shackle

q Bolt

q M491

q Other

Maximum Weight ______________

Maximum Length ______________

APPLICATION INFORMATION

Describe Application:

Lead Line Speed: ______________

Environment: ______________

SPECIAL REQUIREMENTS

Special Testing:

Finish:

Third Party Inspection / Approval:(If 3rd party Inspection or Approval is required, please refer to page 467-468.)

q Other (Specify)

Page 15: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2014 The Crosby Group LLCAll Rights Reserved

478

McKissick® API 2C Block SystemsBLOCK REQUIREMENTS – confirm the following:q Material traceability, chemistry reports, tensile test reports, magnetic particle inspection per ASTM E-709 on the

following components: HOOK, HOOK NUT, HOOK TRUNNION, CENTER PIN, SIDE PLATE, SHEAVE (no MPI on sheave) and DEAD END.

q Impact tests with reports on HOOK, testing to be performed per API-2C latest revision. Impact test with reports on HOOK NUT, TRUNNION, CENTER PIN and DEAD END. Testing to be performed per API-2C latest revision.

q Sheave diameter based on D/d ratio based on pitch equal to 18/1. Weight plates produced from plate steel. Hook to rotate on thrust bearing with grease fitting. Sheave bearing to be roller bearings with grease fitting.

q Design Service Temperature = ________ (standard is 0°C. +32°F)q 3rd Party ABS, DNV, etc.OVERHAUL BALL REQUIREMENTS – confirm the following:q Material traceability, chemistry, tensile test, magnetic particle inspection per ASTM E-709 on the following

components: SWIVEL EYE, FIXED EYE, SWIVEL BASE, PLUG, CASE PIN, HOOK PIN AND HOOK.q Charpy impact tests with reports on HOOK, testing to be performed per API-2C latest revision. Impact test

with reports on SWIVEL EYE, FIXED EYE, SWIVEL BASE, PLUG, CASE PIN AND HOOK PIN, testing to be performed per API-2C latest revision.

q Proof test to 0.5 ultimate load.q Design Service Temperature = ________ (standard is 0°C. +32°F)q 3rd Party ABS, DNV, etc.

SELECT DESIRED TAG

q q

OR

WEDGE SOCKET REQUIREMENTS – confirm the following:q Material traceability, chemistry, tensile test, magnetic particle inspection per ASTM E-709 on the following

components: SOCKET BAIL AND PIN.q Charpy impact test with reports on SOCKET BAIL AND PIN, testing to be performed at per API-2C latest revision.q Wire rope size ______q 3rd Party ABS, DNV, ect.

Proof test to 0.5 ultimate load.Rating #1: Cv = W.L.L. = (T or mt) with design factor = Rating #2: Cv = W.L.L. = (T or mt) with design factor = Personnel rating =Wire rope size Minimum desired weightNumber of sheaves Parts of line = 2 times number of sheaves =

Eye to rotate on thrust with grease fitting.Rating #1: Cv = W.L.L. = (T or mt) with design factor = Rating #2: Cv = W.L.L. = (T or mt) with design factor = Personnel rating =Wire rope size Minimum desired weight

q

q

7 7

Page 16: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

479

Sp

ecia

lP

rod

uct

s

McKissick® Custom SwivelsCustomer Name: Date:

Address:

City: State, Zip: Country:

Phone: Fax: E-Mail:

Customer Contact Name: Quantity:

SWIVEL Angular Contact Bearing Tapered Roller BearingSWIVEL STYLE JAW & HOOK EYE & JAW BULLET JAW & JAW (ACBS ONLY) JAW & JAW EYE & EYE JAW & EYE EYE & HOOK

APPLICATION INFORMATIONWLL required: __________ Hook Size: __________FREQUENCY OF USE: Continuous: __________ Intermittent: __________ One Time: __________SPECIAL REQUIREMENTSSpecial Testing: __________________________________________________________________________Finish: _________________________________________________________________________________Third Party Inspection / Approval: ____________________________________________________________(If 3rd Party Inspection or Approval is required, please refer to page 468.

Dimensions for EyeA ______ B ______C ______ D ______

Dimensions for JawA ______ B ______C ______ D ______ throat opening

Page 17: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

480

Customer Name: Date:

Address:

City: State, Zip: Country:

Phone: Fax: E-Mail:

Customer Contact Name: Quantity:

SHEAVE INFORMATIONSheave Diameter:__________ Wire Rope Size:__________ Number of Sheaves: 1___ or 2___BEARING TYPE- Sheave Bronze Bushing Roller Bearing Tapered Roller Bearing OtherBEARING TYPE- Barrel Bronze Bushing Roller Bearing Tapered Roller Bearing OtherBLOCK INFORMATIONSyle: Pedestal Mount Base MountDimensions: A. __________ B. __________ C. __________ D. __________APPLICATION INFORMATIONLead Line Speed: __________ Single Line Pull: __________ Degree of Wrap: __________Environment: _______________________________________________________________________________

FREQUENCY OF USEContinuous: __________ Intermittent: __________ One Time: __________SPECIAL REQUIREMENTSSpecial Testing: __________________________________________________________________________Finish: _________________________________________________________________________________Third Party Inspection / Approval: ____________________________________________________________(If 3rd Party Inspection or Approval is required, please refer to page 467-468.)

McKissick® Custom FairleadersCUSTOM DECK MOUNTED ANCHOR FAIRLEADERS

Base Mount (2 sheave version shown) Pedestal Mount (1 sheave version shown)

Page 18: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

481

Sp

ecia

lP

rod

uct

s

GENERAL REQUIREMENTS

Working Load Limit per pair (weight of load): q Handle Required

DIMENSIONAL REQUIREMENTS

Grip Opening (A): Grip Depth (B):

Plate Thickness (C): Shackle Opening (D):

SPECIAL REQUIREMENTS

Finish: q Proof Test, load:

q MPI q UT q Third Party Inspection/Approval:

Crosby® Clamp-Co Pipe Hooks

Customer Name: Date:

Address: City: State, Zip:

Phone: Fax: E-Mail:

Customer Contact Name: Quantity:

CUSTOM PIPE HOOK FORM

Page 19: Custom Design Productpouladrasan.com/catalogues/Crosby Special Products.pdf · 2015-12-05 · ... Certification based on DNV Rules or Certification Notes. ... • Rules for Classification

Copyright © 2013 The Crosby Group LLCAll Rights Reserved

482

Approval/ Inspection Requirements

Customer Name: Date:

Address:

City: State, Zip: Country:

Phone: Fax: E-Mail:

Customer Contact Name:

Crosby Proposal Number: Quantity:

Equipment Description: Customer P.O.

Type of Application:

End Users / Operator: Rig/Vessel Name or I.D.

Geographical Location:

Third Party Requirements Form

American Bureau of Shipping

Det Norske Veritas

Lloyds Register

Other

Certification of Construction and Survey of Cargo Gear

Rules of Certification of Lifting Appliances

Lifting Appliances in a Marine Environment

API 8 A

Certification of Drilling Systems

Classification of Mobile Offshore Units Part 6, Chpt. 5.

Other LR API 8 C

Certification of Cranes 2.7-1 Offshore Containers

API 2 C

Other ABS Other DNV Other

Other:

OPERATING CONDITIONSMinimum Design Temperature:

WorkingLoad:

Load Conditions:

EXTENT OF THIRD PARTY INVOLVEMENT: