C:Usersy03DesktopJC MOULD PRESENTATION · ‐ 1994 ‐ Shenzhen JUCHENG Mould Company was founded...
Transcript of C:Usersy03DesktopJC MOULD PRESENTATION · ‐ 1994 ‐ Shenzhen JUCHENG Mould Company was founded...
Who We Are:Dongguan Jucheng (JC) Mould Company is a professional mouldmaker in China since 1994.JC Milestone: ‐ 1994 ‐ Shenzhen JUCHENG Mould Company was founded in Shajing town, Baoan district, Shenzhen city, China.‐ 2007 ‐ The branch company called GUANCHENG Mould was founded in Fujian province, which has more than 100 employees. ‐ 2014 ‐ Shenzhen JUCHENG Mould Company has completely moved out from Shenzhen city to Donggaun city and it was renamed Dongguan JUCHENG Mould Company. How We Grow:Now Dongguan JUCHENG Mould Company has self‐built factory building covers an area of 30000 square meters, located in Songshan Lake, Dongguan City, with approximately 300 employees. What We Do Best: After more than 20 years of hard work and constant improvements, we now have superior manufacturing resources and advanced equipment, and the use of professional mould ERP management system. We are also accredited with the international IS09001‐2008 certification.As company grows, we have been cooperating with a lot of global famous brands. Our yearly output is about 450 moulds and the maximum weight approximates to 40 tons per mould. Our moulds range from: Auto parts, LED TVs, and Computer Monitors. 60% of them are exported to Europe, America, and Asia. Our Pleasure:We warmly welcome old and new customers to visit our company, and look forward to working with you.
Designing Dept. & Project Dept.
Designer: 30 people programmer: 12 people
Meetings:
Designing Meetings Review Meetings
Workshop: Quality Control Dept.
Tool makers : 90 people HEXAGON Measuring Machines: 2 sets Inspectors : 12 people
5‐sedid&5‐axis CNC Machining: 2 sets
Major Parameters:X: 3500MM Y: 2500MM Z: 1000MMX: 2500MM Y: 1500MM Z: 1000MM
CNC Dept.
CNC machines: 25 sets
CNC operator: 20 people
CNC programmers: 16 peopleMachines brands from: Spain, Japan, Taiwan, China, and etc.
EDM Dept.
EDM: 16 sets (including 6 double head machines)
Machines brands from: Japan & Korea
EDM operator:16 people
Spotting Machines: 3 sets Tons from: LS‐400, LS‐300, LS‐120
Spotting Machines
Injection Machines
Injection machines: 10 sets
Such as: 2400T, 1600T, 1000T, 600T, 450T, 360T, 250T, 180T, 160T, 120T
RHCM high gloss mould temperature controller—Rapid Heat Cycle Molding
Mould Heating Media Water(180℃)
Equipment added None
Heat Energy Recycle Middle and low (High pressure recovery)
Cooling Media Water(common temperature)
Equipment Added Water treatment system
Air Compressed 4‐6 bar
General Energy Consumption
Middle
Automotive Showing Room:
Automotive Showing: Automotive Showing:
◀ Roof System
◀ Roof System
◀ Roof System
Water Deflector
◀
◀
Door Panel
◀
Door Panel
Door PanelDoor Panel
◀ ◀◀
B PillarA Pillar
◀
◀
Roof System
Automotive Showing:
◀ Front Air Grille
◀ Front Bumper
◀ Front Air Grille
◀ Front Bumper
Dashboard ▶
Trunk Trim ▶
Trunk Trim ▶
Internal Parts ▶
Automotive Showing:
Automotive Showing:
Internal Parts
Engine Cover
Head Light
Door panel‐Interior Panel
Fan System
Fan System
TV & Monitors Showing:
TV Rear Cover
Stand Systems
Monitors
C pillar
Moulds Showing:
Auto Parts –C PillarAuto Parts –Door Panel
Auto Parts –Water Deflector(2k‐Parts Product)Auto Parts –C Pillar
Moulds Showing:
Moulds Showing:
Auto Parts‐Internal Parts
Auto Parts‐ Roof System TV Monitor‐55 Inch
Auto Parts‐Fan System Auto Parts‐Inner Fender
2K‐Parts Products Showing:
Automotive product fixture2K‐Parts Products
Our Service
Our Service
Mould modification&
Maintenance
Mould Design
Mouldflow
analysis
Mould Manufacturing
Mould Test&Product Test
Technical Support
Step 1
• 2D Design• 3D Design• Mold flow analysis
Step 2
• CNC Processing• EDM Processing• Mould fitting
Step 3
• Mould Test• Quality Test• Delivery
● Professional personnel “know‐how” to serve client’s best interests: Mold runs dimensionally precise and high efficiency, stably and easy maintenance. ● Dedicated teams for each project to ensure quick response to any problem. ● Large scale equipments to serve the whole process from machining to inspection to mold trials.
Project Management
Weekly reports with detailed photos are sent to customers for monitoring.
Major Clients Global Service
Add: No.16, Xiangming Road,Songmushan Village, Dalang Town, Dongguan City China.
TEL: (86) 769‐82979813至81979818
FAX: (86) 769‐82979812
E‐mail: david@jucheng‐mould.com
http://www.jucheng‐mould.com