CURTAINS Roll-Up Curtains - Center Roll Designed for greenhouses with taller gutter heights and is normally used on sidewalls and endwalls for

ventilation. The curtain is motorized with a counter balance gear motor and includes a steel rolling tube and

hardware. Growers can control the curtain with thermostats or automated environmental controllers. In

addition, it can be opened incrementally with the proper controls.

Item # Description Uses

102398 Center Roll Curtain System

Used in openings to 10’. Has a unique aluminum rolling tube located in the center of the system with a weighted pipe at the bottom to eliminate billowing. Applicable for use on the RB+ or System 2000. Includes aluminum rolling tube, tube splices, bottom weight tube and hardware. Intended for motorization (sold separately) but can be operated manually. Requires poly material & eave and base extrusions.

102582 Mount Assembly Includes gear motor mounting kit (motor sold separately), counter weight assembly and mounting assembly to curtain.

102401 Rainbow Plus End Baffle

Seals the curtain ends. Includes 1” square steel mounting frame, loretex curtain material, and hardware.

102376 Sidewall Retaining System 8’

Uses 1” round steel tube placed 6’ on center to secure the curtain system. Includes mounting hardware.

102394 Curtain Skirt Seals roll-up curtains at the base. Includes poly material, cable ties, monofilament and end clamps. Requires additional base extrusions and Polylock.

Center Roll curtain

applications

Roll-Up Curtains -Even Roll This system is designed for any type of greenhouse sidewall and endwall. It rolls from the bottom with a hand

crank, though motorization options are available. The Even Roll curtain system includes an aluminum rolling

tube, stainless steel Polylock-with-a-twist wire and rolling tube splices.

Item # Description Uses

102392 Even Roll Curtain System

Includes aluminum rolling tube, wire insert and rolling tube splices.

10240 PowerHouse End Baffle

Seal the curtain ends on your PowerHouse or other Quonset growing houses. Includes reinforced poly and mounting hardware.

102401 Rainbow Plus End Baffle

Seals the curtain ends. Includes 1” square steel mounting frame, loretex curtain material, and hardware.

102375 PowerHouse Retaining System

Uses UV resistant retaining straps to secure your curtain. The straps retain the curtain and aid the rolling of the curtain materials. Straps are placed 6’ on center to secure the curtain system. Includes mounting hardware.

102376 Sidewall Retaining System 8’

Uses 1” round steel tube placed 6’ on center to secure the curtain system. Includes mounting hardware.

102394 Curtain Skirt Seals roll-up curtains at the base. Includes poly material, cable ties, monofilament and end clamps. Requires additional base extrusions and Polylock.

Even Roll curtain

applications

Roll-Up Curtains- System Components

Item # Description

1023961 Even Roll Bottom Roller 16’3”

10237 Rainbow Plus Roll-Up Curtain Crank with Adaptor

P3263 Roll-Up Curtain Crank Assembly Only

P3238 Snap-Lock Crank Handle 8’

P32381 Snap-Lock Crank Handle 5’

Telescoping Curtain Make your greenhouse more efficient by automating your roll up curtains. Ideal for sidewall or endwall

curtains measuring between 60 and 160 feet long, these roll up shafts for fixed motors are built to last.

Drop Curtains These curtain systems are an excellent way to ventilate greenhouses and Stuppy makes using them easy by

configuring the curtains for sidewall and endwall use. In open position, our drop curtains allow for natural

ventilation, saving you energy dollars. And when in closed position, they allow growers to use automatic

ventilation and cooling equipment when needed.

Curtain Corner Covers NOTE: Corners are for use ONLY with drop curtain systems.

Item # Description

1702 72” Outside Corner Cover

17023 72” Inside Corner Cover (Right)

17024 72” Inside Corner Cover (Left)

17021 96” Outside Corner Cover

17025 96” Inside Corner Cover (Right)

17026 96” Inside Corner Cover (Left)

Rainbow Plus Winch Stations Note: Winch stations are for use ONLY with drop curtain systems. Includes 1.90” O.D., 14-gauge pipe, 9’6”,

pulley assembly, and winch with brake and hardware.

Item # Description Uses

10258 Winch Station, In-Ground, Sidewall Mount up to 8’

10259 Winch Station, In-Ground, Endwall Mount up to 8’

102591 Winch Station, Above Ground, 6’ Sidewall

102593 Winch Station, Above Ground, 8’ Sidewall

Drop Curtain Extrusions Item # Description Uses

10244 Polylock Curtain Top – 16’ Lengths

10252 Polylock Curtain Eave Endwall – 16’ Lengths

10254 Polylock Curtain Eave Sidewall – 12’ Lengths

Curtain Coverings

Item # Description Unit of Measure

25032

Loretex FSC 1000 UV Curtain Material

4’ x Custom Length Sq. Ft.

25033 5’ x Custom Length Sq. Ft.

2504 6’ x Custom Length Sq. Ft.

25056 8’ x Custom Length Sq. Ft.

2505 10’ x Custom Length Sq. Ft.

2503 Custom width x Custom Length Sq. Ft.

2506 Loretex Hem Charge (3.5”/1.66” Pipe) L. Ft

2507 Loretex Repair Tape Each

2509 Grommets Each

2516 Griffolyn TX 1200 10mil Clear 6’ Sq. Ft.

2518 Griffolyn T55 6mil Black/White Sq. Ft.

2514 Griffolyn 6mil Clear 4’ Sq. Ft.

Drop Curtain Components Item # Description Uses

1090 Polylock Baseboard 12’ Aluminum

Used as a baseboard for attaching roof or sidewall polyethylene on ground to ground or raised sidewall greenhouses. Designed to span 4” between supports or attach to a continuous support. Requires one run of Mark III inserts (#1044).

1000 Girt/Baseboard Splice 6”

Used to splice lengths of Aluminum Girt (#1001) and Polylock Baseboard (#1090). Requires four Tec Screws (#1231) per splice.

10213 Poly Fiber Splice w/ Twist 16’

Used when transitioning from poly to rigid covering on sides or ends. Requires wire (#10082).

10244 Polylock Curtain Top 16’

Used as a cent member on curtain. Mate piece to Curtain Eave (#10254) and Capped Curtain Extrusion (#P2568). Pieces are spliced together using 6” splice and secured with Tec Screws and hung by cable attached to winch assembly.

10254 Curtain Eave Polylock w/ Twist 12’

Used for eave members on Rainbow Plus sidewall. Attaches at every “L” connector flange with two 5/16”x1” Hex Head Bolt (#1340) with locknuts. Requires one run of Mark III inserts (#1044).

1099 Curtain Eave Spacer Corner spacer for #10254 curtain eave (3-3/8”)

P2568 Capped Curtain Extrusion 16’

Used on Rainbow Plus endwalls with rigid covering. Spliced together with Wing Leading Edge Splice (#10286) and secured with 5/16”x3/4” carriage bolts (#1338).

10252 Curtain Eave End Wall 16’

Used on Rainbow Plus Endwall (1.90 vertical). Requires one run of Mark III inserts (#1044).

1044 Mark III w/ Beige Vinyl 4’

Designed with soft vinyl nose-piece (beige is standard). Makes securing one or more layers of poly film or shade fabric east even if wrinkles are present.

10443 Replacement Beige

Vinyl Standard-Beige for double poly film layer.

10448 Replacement Black Vinyl

Oversized for single poly.

1026 Polylock Installation Tool

Used to install and remove inserts. Two required.

13842 Utility Cable Steel, Galvanized cable 1/8” 7x7 main Note: Use for lengths up to 150’

1385 Main Cable Steel, Galvanized cable 3/16" 7x7 main Note: Use for lengths over 150’

13866 Cable Steel, Galvanized cable 1/4” 7x7 main

14091 Curtain Strap Black polypropylene 2-3/4” x 100’

1409 Curtain Strap Black polypropylene 2-3/4” x 300’

10262 Curtain Strap Clamp

1.75" Requires one run of Mark III inserts.

10286 Wing Leading Edge Splice

6" Splice 1x1x1/8

1038 Roller Retainer Bracket 1-1/2”

Used for curtain eave extrusion (#10252) only.

1039 Outside Retainer Bracket

Keeps cable from sliding off of the roller

P1571 Stainless Steel Axle 3/8"O.D. x 7/8" long

1383 Curtain Tiller Clamp Clamps onto a wire cable, acts as a stop for the cable hooks cable to curtain top

1389 Aluminum Ferrule 3/16” x 1/8" For curtains over 150’

Z1203 Nylon Bushing .625 O.D. x .380 I.D. For Curtain Eave Extrusion (#10252) only.

P1513 Alum Stop Sleeve For 1/8” cable