CURRICULUM VITAE - educ.utm.my file2 AWARD AND HONORS RECEIVED 2016 : SILVER Award for “Resolving...
Transcript of CURRICULUM VITAE - educ.utm.my file2 AWARD AND HONORS RECEIVED 2016 : SILVER Award for “Resolving...
1
CURRICULUM VITAE
PERSONAL DETAILS
Name : NOR FADILA BINTI MOHD. AMIN
Gender : FEMALE
Date of Birth : 28 NOVEMBER 1969
Nationality : MALAYSIAN
Marital Status : MARRIED
Permanent
Address
: 19, JALAN SILAT LINCAH 21, BANDAR SELESA JAYA, 81300 JOHOR
BAHRU, JOHOR
Correspondence
Address
: DEPARTMENT OF TECHNICAL AND ENGINEERING EDUCATION,
FACULTY OF EDUCATION
UNIVERSITI TEKNOLOGI MALAYSIA
81310 JOHOR BAHRU, JOHOR, MALAYSIA
Telephone : +607-553 4396
Mobile : +6019-770 1969
Fax : +607- 553 4895/ 557 7351/ 553 4884
Email : [email protected]
Website : http://www.edu.utm.my/fadila
ID Staff : 7076
Expertise : Technical and Vocational Education
Design and Technology
Innovation in Learning and Teaching
ACADEMIC QUALIFICATIONS
2013 : Doctor of Philosopy (Technical and Vocational Education)
Universiti Teknologi Malaysia
2006 : Certificate of Education
University Technology of Sydney
1997 : Master of Education (Technical and Vocational Education)
Universiti Teknologi Malaysia
1992 : Bachelor of Technology with Education (Civil Engineering)
Universiti Teknologi Malaysia
2
AWARD AND HONORS RECEIVED
2016 : SILVER Award for “Resolving the Conundrum of Superior Performers in
Organizations : The Star-Chef Competency Profiling Using the Application of
the Rasch Measurement Model”, in Innovative Practices in Education and
Industry Exhibition (I-PEINX 2016).
2015 : Vice Chancellor Innovation Award 2015 for the innovation of "Sistem
Maklumat Latihan Mengajar", Citra Karisma, 7 June 2015
2014 : SILVER Award for "Sistem Maklumat Latihan Mengajar" in National University
Carnival on e-Learning (NUCEL) 2014
2012 : SILVER Medal (Engineering and Technology Category) for Shuttlecock
Launcher Project in Novel Research and Innovation Competition (NRIC)
2012 : University Excellent Service Award
2002 : University Excellent Service Award
PROFESSIONAL MEMBERSHIP / QUALIFICATIONS / RECOGNITION
1. Member of the Asian Academic Society for Vocational Education and Training (AASVET).
Membership No. : M00006
2. Member of the Malaysia Technical and Vocational Education Association. Membership No. :
V00377
3. Member of the Malaysian Educational Research Association (MERA). Membership No. : O-
0228
ADMINISTRATIVE EXPERIENCE
University Level
2017 : Position/Employer
Nov 2017 to Oct 2020 – Academic Manager (General Courses),
Center for Co-curriculum and Service Learning
Office of Undergraduate Study
UNIVERSITY COMMITTEE
2017 - 2018 : Member of the Innovation and Commercialisation Committe, Faculty of
Education, UTM.
2017 - 2018 : Member of the Technical and Vocational Education and Training Group
Research Colloquium Committee, Faculty of Education, UTM.
2016 – 2018 : Member of the Quality Committee, Faculty of Education, UTM.
3
2016 : Member of the International Service Learning Programme Committee,
Faculty of Education, UTM.
2016 : Member of the Service Learning Comittee, Faculty of Education, UTM.
2016 : Secretary of the Practical Training Committee, Faculty of Education, UTM.
2016 : Member of the Curriculum Review Committee Task Force, Faculty of
Education, UTM.
2016 : Technical and Vocational Education Postgraduate Programme Coordinator,
Faculty of Education, UTM.
2015 : Member of the Task Force of the 11th Malaysia Plan Document Preparation
– The construction of building and the provision of equipment for UTM Centre
for Student Innovation
2015 : Member of the Practical Training Committee, Faculty of Education, UTM.
2015 : Member of the First Year Experience Programme Committee, Faculty of
Education, UTM.
2015 : Member of the Undergraduate Compliance Audit Committee, Faculty of
Education, UTM.
2015 : Technical and Vocational Education Postgraduate Programme Coordinator,
Faculty of Education, UTM.
2014 : Member of the Occupational Health and Safety Committee, Faculty of
Education, UTM.
2014 : Member of the Practical Training Committee, Faculty of Education, UTM.
2014 : Member of the Students’ Character Development and Activity Committee,
Faculty of Education, UTM.
2014 : Member of the Undergraduate Project Committee, Faculty of Education,
UTM.
2014 : Member of the School in Hospital Programme Committee, Faculty of
Education, UTM.
2014 : Technical and Vocational Education Postgraduate Programme Coordinator,
Faculty of Education, UTM.
2013 – 2014 : Member of the Faculty of Education Website Project Committee, Faculty of
Education, UTM.
4
2013 : Member of the Enhancing Graduate Attribute Project, Faculty of Education,
UTM.
2013 : Member of the Faculty of Education UTM Brand Pedagogy, Faculty of
Education, UTM.
2013 – 2015 : Member of the Quality Committee, Faculty of Education, UTM.
2012 - 2015 : Member of the Occupational Environment, Safety and Health Committee,
Faculty of Education, UTM.
2012 : Fascilitator for the University General Courses TOT Workshop – Innovation,
Creativity and Entrepreneurship Cluster, UTM.
2012 : Fascilitator for the Teacher Development Program, Faculty of Education,
UTM.
2011 – 2013 : Member of the University Students Innovation Committe, UTM
2011 – 2013 : Member of the Data Management System/Office Automation Programme,
Faculty of Education, UTM.
2011 – 2013 : Member of the Basic Training Courses for Trainers Programme, Faculty of
Education, UTM.
2010 : Interview Panel for the Bachelor’s Degree Programme in Education and
Diploma in Education Admissions, Faculty of Education
2009 : Member of the Facility Management Committee, Faculty of Education
2009 : Member of the English Proficiency Enhancement Committee, Faculty of
Education
2009 : Coordinator for the purpose of preparing an audit of institution visits
(Academic Performance Audit)
2009 : Facilitator for the Programme of How to Get Yourself Employed and Teacher
Development, Faculty of Education
2009 : Member of the Occupational Safety and Health Committee, Faculty of
Education
2008 : Member of the Vice Chancellor Quality Award Committee, Faculty of
Education
2007 : Member of the Undergraduate Programme Curriculum Review Working
Committee, Faculty of Education
5
2002 : Member of ISO 2000 Committee Task Force, Faculty of Education
2002 : Member of Quality Monitoring Committee, Faculty of Education
2002 : Coordinator for the Special Graduating Programme for Teachers (PKPG) for
Technical Teacher College, Kuala Lumpur
2001 : Member of Islamic Development Bank Tender Evaluation Committee, Faculty
of Education
2001 : Internal Auditor, Faculty of Education
2000 : Coordinator for the Special Graduating Programme for Teachers (PKPG) for
Batu Pahat Teacher College
2000 : Coordinator for Faculty Teaching, Faculty of Education
2000 : Member of Technical and Vocational Education Curriculum Review
Committee, Faculty of Education
1999 : Member of Smart Faculty Committee, Faculty of Education
1999 : Member of ISO 9000 – Teaching Task Force Group Committee, Faculty of
Education
1999 : Member of Task Force for the Preparation of the Vice Chancellor's Quality
Award
NATIONAL APPOINTMENT/COMMITTEE
2016 : Associate Editor
Bulletin of Educational Research, Innovation and Thought (BRIGHT),
Universiti Sains Malaysia.
2016 : Pemikir
Leadership Training Module for Johor State UMNO
The Johor State Umno Liaison Body, 15 Feb 2016.
2016 : Item Development Panels
Competency Assessment of Teachers’ Pedagogical Skills in the Field of
STEM Ministry of Education (MoE), Teacher Education Division, Ministry of
Education, 4 October 2016.
2016 : Item Assessment Panels
Competency Assessment of Teachers’ Pedagogical Skills in the Field of
STEM Ministry of Education (MoE), Teacher Education Division, Ministry of
Education, 4 October 2016.
2015 : Speaker, The Sharing Session on the Development of Service Learning
Guidelines, 23 June 2015, Universiti Pendidikan Sultan Idris (UPSI).
6
2015 : Project Advisor,
School in Hospital Volunteer Program Phase 2/ Serie 2, June 2015.
2015 : Panel for The National Professor Council Roundtable Discussion on
Innovation in Teaching and Learning, 23 November 2015, UTM International
Kuala Lumpur.
2014 : Speaker
Innovation Week Programme 2014, Kota Tinggi Vocational College, Johor.
17 April 2014.
2001 : Chairman of the Quality Control Committee of the KBSM Textbook for
Engineering Drawing Form 4 subject
2000 : Panel for Syllabus Development for the Postgraduate Teacher Education
Course
2000 : Judge for the Science and Innovation Competition in conjuction with Pahang
State Science and Technology Education Carnival 2000
INTERNATIONAL APPOINTMENT/COMMITTEE
2017 : Plenary Speaker
The 3rd International Seminar on Education Technology (ISET 2017), 24
May 2017, Universitas Negeri Semarang, Indonesia
2017 : Workshop Speaker
Universitas PGRI Semarang Postgraduate Programme in Conjunction with
The 3rd International Seminar on Education Technology (ISET 2017), 24
May 2017, Universitas PGRI Semarang, Indonesia
2017 : Committee Member
International Conference Applied Counseling and Psychology (ICACP 2017),
7 – 8 Feb 2017, Le Grandeur Palm Resort, Johor, Malaysia
2017 : Supervisor
International Teaching Practices Programme in collaboration between
Universitas PGRI Semarang and UTM at Sek. Men. Kejuruan Negeri 4 and
Sek. Menengah Kejuruan Negeri 7, Semarang, Indonesia. 12 Feb – 11
March 2017.
2017 : Coordinator
International Teaching Practices Programme in collabaoration between UTM
and Universitas Muhammadiyah Purwokerto, Indonesia, 14 Feb – 14 March
2017.
2016 : Deputy Chair,
Technical and Vocational EducationTraining International Conference
(TVETIC2016), 17 – 20 Nov 2016, KSL Johor Bahru, Malaysia
7
2016 : Workshop Speaker
“Innovation Ecosystem in TVET”
Technical and Vocational EducationTraining International Conference
(TVETIC2016), 17 – 20 Nov 2016, KSL Johor Bahru, Malaysia
2016 : Committe Member
International Conference on Education and Higher Order Thinking Skills
(ICES 2016), 11 – 13 April 2016, Dewan Sultan Iskandar, Universiti Teknologi
Malaysia.
2016 : Coordinator,
International Teaching Practice Programme
Universitas PGRI Semarang, Indonesia, 25 Apr – 20 May 2016.
2016 : Supervisor
International Teaching Practices Sit-In Programme Faculty of Education.,
UTM and Universitas Muhammadiyah Jakarta, Indonesia, 19 Sept – 10 Oct
2016.
2015 : Guest Judge
The Final Round of the South East Asian Global Innovation Challenges
Competition (SEAGIC 2015) organized by the American Chemical Society,
Malaysia International Chemical Science Chapter, 4 Nov 2015, Centre for
Student Innovation, UTM.
2015 : Speaker
Postgraduate Seminar on Sustainability in Higher Educationn, 10 November
2015, Universitas PGRI Semarang, Indonesia.
2015 : Supervisor
International Community Services and Field Teaching Practices for Students
of Faculty of Mathematics and Science, State University of Makassar, 26 July
– 20 August 2015.
2015 : Secretary I
The 2nd International Education Postgraduate Seminar (2ndIEPS 2015), 20 –
21 December 2015, Pulai Spring Resort, Johor Bahru, Johor.
2014 : Mentor Lecturer,
International Teaching Practice Programme for Students of Yogyakarta State
University, 28 June – 20 July 2014.
2014 : Advisor
International Community Services and Teaching Practices for Students of
Faculty of Mathematics and Science, State University of Makassar, 23 August
– 18 September 2014.
8
2014 : Member of The Development of International Sustainable Cultural Village in
Khleang Sbek, Cambodia Council. Nov 2014 – Nov 2016.
2014 : Committee Member
International Seminar on Technical and Vocational Education (TVEIS 2014),
25 – 26 Aug 2014, Universiti Teknologi Malaysia.
2013 : Editor for the 2nd International Seminar on Quality and Affordable Education
(ISQAE 2013), 7 – 10 October 2013, KSL Hotel & Resort Johor Bahru, Johor,
Malaysia.
1999 : Officer for the International Solar Cycle Team, Faculty of Education
RESEARCH ACTIVITIES
Project Leader
1. Pembangunan Modul Latihan Kemahiran Vokasional bagi Peningkatan Kebolehpasaran
Pekerjaan dalam Kalangan Belia di Negeri Johor. Funded by : Universiti Teknologi Malaysia.
Feb 2018 – Jan 2020. (Vot. PY/2017/02040), Allocation RM30,000)
2. The 21st Century and Green Job Competency Framework for Elderly Caregivers in Malaysia.
Funded by : Ministry of Higher Education. Aug 2017 – Aug 2019 (Vot. PY/2017/01180,
Allocation RM44,096)
3. Pelaksanaan Internship dalam Kerja Kursus bagi Program Sarjana Muda. Funded by :
Universiti Teknologi Malaysia July 2016 - July 2018. (Vot. 4J245, Allocation RM10,000)
4. Kualiti Pengurusan Penyiasatan Jenayah PDRM. Funded by : Ministry of Home Affairs
February 2016 - November 2016. (Vot. 4B251, Allocation RM131,105.04)
5. Petunjuk Kesediaan Pembelajaran Arah Diri dalam kalangan Pelajar Pendidikan Teknik dan
Vokasional di Malaysia. Funded by : Universiti Teknologi Malaysia. April 2011 - Sept 2012.
(Vot. 04J86, Allocation RM40,000)
9
Co-Researcher
1. Pembangunan Kurikulum Prasekolah Berteraskan Penggunaan Media Digital dan
Pendekatan Design Thinking. Funded by Industry Kumpulan Niaga Al-Fateh Sdn. Bhd.
March 2017 – February 2020. (Vot. 4C135, Allocation RM30,000)
2. International Service Learning 'Menuju Sejuta Impian Bersama'. Funded by Universitas
Sriwijaya, Palembang, Indonesia 8 - 15 March 2016. (Vot. 4X212, Allocation RM5,000)
3. Development of Rasch-Calibrated Item Pools in Computer Adaptive Testing (CAT) for
Enhancing Reasoning Skills in High School Science and Mathematics. Funded by : Ministry
of Higher Education. November 2015 – October 2017. (Vot. 4X218, Allocation RM99,000) 1
4. Program Pendidikan Kesihatan Menangani Stress dalam kalangan Care-Giver. Funded by :
Universiti Teknologi Malaysia May 2015 - Oct 2016. (Vot.09H60, Allocation RM30,000)
5. Permasalahan Pengajaran dan Pembelajaran Sekolah Memandu di Malaysia dalam Proses
Penguasaan Kemahiran Memandu. Funded by Fundamental Research Grant Scheme
(FRGS) July 2014 - June 2016. (Vot. 4F567, Allocation RM68,200) 2
6. Procrastination Among University Teknologi Malaysia Undergraduate Students and Its
Affects to the Academic Performance. Funded by Universiti Teknologi Malaysia April 2014 -
March 2015. (Vot.09J56, Allocation RM20,000)
7. Kepimpinan Glokal Penghulu Model 3KI Johor Darul Ta'zim. Funded by Universiti Teknologi
Malaysia April 2014 - March 2015. (Vot. 0825, Allocation RM23,000)
8. Penghayatan Jemaah Terhadap Khutbah Jumaat Negeri Johor Darul Ta'zim. Funded by
Johor State Religious Department Dec 2014 - March 2015. (Vot.4B175, Allocation
RM66,478)
9. Formulasi Interpretasi Skor Ujian Menggunakan Perbandingan Pendekatan Teori Ujian
Klasik dan Teori Respon Item. Funded by Fundamental Research Grant Scheme (FRGS)
Dec 2013 - Dec 2015. (Vot.4F381 , Allocation RM81,500)
10. Capacity Building Towards Innovative Ecopshere in Higher Education Institutions in
Malaysia. Funded by National Higher Education Research Institute Aug 2013 - July 2014.
(Allocation RM220,000)
11. Penerokaan Adaptasi Pentaksiran Akhlak dalam Sistem Penggredan Pencapaian Pelajar di
Institusi Pengajian Tinggi Awam. Funded by Exploratory Reseach Grant Scheme (ERGS)
June 2012 - Dec 2014. (Vot.4L057, Allocation RM75,000)
12. Pembinaan dan Pengesahan Instrumen Pengujian Pemahaman Konsep Inovasi. Funded by
Universiti Teknologi Malaysia May 2012 - April 2013. (Vot.05J24, Allocation RM12,099)
13. Exploratory Study in Developing a Framework to Observe, Identify and Capturing Behaviour
Whilst Designer engaged in Sketching Toward Creative and Innovative Designing. Funded
by Exploratory Research Grant Scheme 2014 – 2015. (Vot.4L018, Allocation RM75,000)
14. Pola Kemahiran Visualisasi dan Gaya Belajar dalam kalangan Pelajar Kejuruteraan di UTM.
10
Funded by Universiti Teknologi Malaysia Sept 2009 - Aug 2010. (Vot. 77942, Allocation
RM10,000)
15. The Strategic Management in technical and Vocational Education Program of Malaysia
Higher Institution. Funded by SEAMEO VOCTECH/Netherland Government July 2008 - June
2009. (Allocation USD2,000)
16. Kerangka Pegangan dan Amalan Penyeliaan Pengajaran Pensyarah Pembimbing
Pendidikan Teknikal dan Vokasional/Kejuruteraan dalam Praktikum Latihan Mengajar.
Funded by Fundamental Research Grant Scheme (FRGS) Dec 2007 - Aug 2008.
(Vot.78261, Allocation RM59,918)
17. Characterizing Design for Web-Based Adult Learning System. Funded by Fundamental
Research Grant Scheme (FRGS) Mac 2007 - Mac 2009. (Vot.78113, Allocation RM25,000)
18. Design and Develop Special Equipments for Cerebral Palsy. (Vot. 71030)
CONSULTANCY PROJECTS
Member :
1. Program Pemerkasaan Asnaf bagi Tahun 2016. Unit Pembangunan Asnaf, Majlis Agama
Islam Negeri Johor, Amount : RM134,000 from Majlis Agama Islam Negeri Johor
(Ref.UT.KORP/1.11 Jld. 13 (90), 2016)
2. Electronic Product Development Course (Malaysian Skills Certification Level 4) Module B05-
04001 (Microcntroller Configuration) K2, Amount : RM35,000 from Ministry of Education,
Malaysia (Ref.UT.KORP/1.11 Jld. 8 (13)
3. Research Methodology and Instrument Construction Training for IKBN Graduate
Employability. Amount : RM35,000 from Ministry of Youth and Sports. (29 Sept – 1 Oct
2013)
4. The Concept of Nine Technical and Thrity One Vocational Textbook. Amount : RM19,000
from Ministry of Education (Vot. 63353, June 2002 – October 2003)
ITELECTUAL PROPERTIES
11
Copyright 1. Projek “Kit Merangka Karangan” (December 2015)
2. Projek Inovasi Model Pencernaan Makanan (December 2015)
3. Projek Inovasi Model Bulatan Penyelesaian Masalah Matematik Berayat (December 2015)
4. Projek Inovasi Model Bentuk dan Ruang (December 2015)
5. Block Puzzle (December 2015)
6. Projek Inovasi Pengajaran dan Pembelajaran Ekonomi Asas (Skim Perbankan Islam) –
Wheel of Islamic Banking Kit (December 2015)
7. Projek Inovasi Pengajaran dan Pembelajaran Matematik Berkonsepkan Koordinat Bricknet
(December 2015)
8. Projek Inovasi Permainan Eksplorasi Pendidikan Moral Tahun 3 KSSR (December 2015)
9. Projek Inovasi Pengajaran dan Pembelajaran Perbendaharaan Kata dalam Bahasa Inggeris
“Words Tower” (December 2015)
10. The Understanding Towards the Concepts of Innovation (UKI) Among Students (April 2013)
11. Pemahaman Konsep Inovasi (UKI) di kalangan Pelajar (April 2013)
TEACHING ACTIVITIES
Postgraduate
No. Course Code Course Semester
1. MPPU1003 Innovation in Learning anf Teaching 20172018/2
2. MPPU1003 Innovation in Learning anf Teaching 20172018/1
3. MPPU1003 Innovation in Learning anf Teaching 20162017/2
4. MPPU1003 Innovation in Learning anf Teaching 20162017/1
5. MPPU1003 Innovation in Learning anf Teaching 20152016/2
6. MPPU1003 Innovation in Learning anf Teaching 20152016/1
12
7. MPPU1003 Innovation in Learning anf Teaching 20142015/2
8. MPPU1003 Innovation in Learning anf Teaching 20142015/1
9. MPPV1313 Models of Teaching in Technical and
Vocational Education
20142015/1
10. MPK2053 Current Issues in Technical and Vocational
Education
20132014/2
11. MPK1033 Supervision in Technical and Vocational
Education
20032004/1
12. MPK1043 Foundations of Technical and Vocational
Education
20012002/1
Undergraduate
No. Course Code Course Semester
1. SPPL4412 Invention 20172018/2
2. SPPL1002 Wood Technology 20172018/2
3. SPPE1102 Woodworking Practices 20172018/2
4. UKQA2082 Woodcrafts 20172018/2
5. SPPA2001 Microteaching 20172018/1
6. UKQA2082 Woodcrafts 20172018/1
7. SPPE3102 Domestic Plumbing Works 20172018/1
8. SPPE3392 Plastering and Finishing Works 20172018/1
9. SPPE2272 Foundation and Concrete Works 20162017/2
10. SPPE2272 Foundation and Concrete Works 20162017/1
11. SPPA2001 Micro Teaching 20162017/1
12. SPPE 2052 Basic Furniture Making 20152016/2
13. SPPL4403 Innovation 20152016/1
14. SPPE1322 Construction Materials 20142015/2
15. SPPL4403 Innovation 20142015/2
16. SPPA2001 Micro Teaching 20142015/1
17. SPPE3032 Building Drawing 20142015/1
18. SPPL4403 Innovation 20142015/1
19. SPPE2032 Basic Innovation 20132014/1
13
20. SPPA2001 Micro Teaching 20132014/1
21. SPPE2052 Basic Furniture Making 20132014/1
22. UKQU2202 Innovation and Creativity 20132014/1
23. UKQU2202 Innovation and Creativity 20132014/2
24. SPPE2032 Basic Innovation 20122013/2
25. SPPE1622 Construction Technology 20122013/2
26. SPPE1022 Engineering Drawing 1 20122013/2
27. SPPA2001 Micro Teaching 20122013/2
28. SPPE2052 Basic Furniture Making 20122013/1
29. SPPE2032 Basic Innovation 20122013/1
30. SPPA2001 Micro Teaching 20112012/2
31. SPPE1102 Wood Practices 20112012/2
32. SPPE1622 Construction Technology 20112012/2
33. SPPE2032 Basic Innovation 20112012/2
34. SPPE2052 Basic Furniture Making 20112012/1
35. SPPE1322 Construction Materials 20112012/1
36. SPPL1002 Wood Technology 20112012/1
37. SPE2402 Computer Aided Design 20102011/1
38. SPE2032 Basic Innovation 20092010/2
39. SPE2622 Industrial Design 20092010/2
40. SPL1002 Wood Technology 20092010/1
41. SPE2032 Basic Innovation 20082009/2
42. SPE2622 Industrial Design 20082009/2
43. SPE2402 Computer Aided Design 20082009/2
44. LPT1003 Engineering Drawing 20082009/2
45. SPL1002 Wood Technology 20082009/1
46. SPE2032 Basic Innovation 20072008/2
47. SPE2622 Industrial Design 20072008/2
14
48. LPA1002 Basic Engineering Drawing 20072008/2
49. SPL2402 Computer Aided Design 20072008/2
50. LPT1003 Engineering Drawing 20072008/2
51. SPPL1002 Wood Technology 20032004/1
52. SPK3402 Architectural Drawing 20032004/1
53. SPK3033 Workshop Safety 20022003/2
54. SPK4012 Innovation II 20022003/2
55. SPK4002 Innovation 20022003/2
56. SPK3402 Architectural Drawing 20022003/1
57. SPH4002 Innovation 20022003/1
58. SPK3032 Basic Innovation 20022003/1
59. SPK3032 Basic Innovation 20012002/2
60. SPK2013 Evaluation and Assessment in TVE 20012002/2
61. SPK1042 Construction Technology 20012002/2
62. SPA2000 Micro Teaching 20012002/2
63. SPK3402 Architectural Drawing 20012002/1
64. SPK3002 Advanced Engineering Drawing 20012002/1
65. SPK2013 Evaluation and Assessment in TVE 20002001/2
66. SPK4002 Innovation 20002001/2
67. SPK1002 Basic Engineering Drawing 20002001/2
68. SPK3042 Trade Practices II 20002001/1
69. SPK2001 Engineering Drawing I 20002001/1
70. SPK3032 Basic Innovation 20002001/1
71. SPK1002 Basic Engineering Drawing 19992000/2
72. SPK4012 Innovation II 19992000/2
73. SPK3032 Basic Innovation 19992000/1
74. SPK3042 Trade Practices II 19992000/1
75. SPK2001 Engineering Drawing I 19992000/1
15
76. SPK3033 Workshop Safety 19961997/2
77. SPK3042 Trade Practices II 19961997/1
78. SPK4002 Innovation 19961997/1
79. SPK1013 Basic Trades 19961997/1
80. SPK2001 Engineering Drawing I 19961997/1
SUPERVISION
PhD Student
No. Name Research Title Year/Status Role of
Supervision
1. Muhamad Shafeq bin Abdul
Rashid
Technical and Vocational
Education and Training
2017/Active Main Supervisor
2. Olojuolawe Sunday Rufus Deepening Employability
Skills Among Technical
and Vocational Education
Students in College of
Education in South West
Nigeria
2016/Active Main Supervisor
3. Nor Hasmida binti Mohd.
Nor
PPP153043
Competencies
Framework of
Gerontology and Geriatric
Caregivers in Malaysia
2016/Active Main Supervisor
4. Crystal Joan Peter
PP123063
Sustainability Leadership
Framework for Malaysian
Polytechnics
2015/Active Main Supervisor
5. Nornazira binti Suhairom
PP123023
Chef's Competency
Model for Superior Work
Performance in Culinary
Profession
2013 –
2016/Completed
Co-Supervisor
6. Rohaiza binti Zakaria
PP113206
Sketching to Encourage
Creativity in Designing
2012/ Active Co-Supervisor
Master of Education (by Research)
No. Name Research Title Year/Status Role of
16
Supervision
1. Noraisyah binti Che
Derashid
MPP143001
Instrument to Measure
the Level of Innovation
Among UTM
Undergraduate Students
2014 - 2017/
Completed
Co-Supervisor
Master of Education (Mixed Mode)
No. Name Research Title Year/Status Role of
Supervision
1. Zahrina binti Ahmad
MPP162025
2016/Active Main Supervisor
2. Fauzi bin Toed
MPP142026
Penerapan Kemahiran
Insaniah dalam Kalangan
Pelajar Program Binaan
Bangunan di Kolej
Vokasional Negeri Johor
2014/ Active Main Supervisor
3. Haslina binti Sulfani
MP121136
Implikasi Transformasi
Pendidikan Vokasional
Terhadap Kursus
Perkhidmatan Asuhan
Kanak-kanak di Kolej
Vokasional
2012 – 2015/
Completed
Main Supervisor
Master of Education (Taught Course)
No. Name Research Title Year/Status Role of
Supervision
1. Nurfazwin binti Ab Rashid Tahap Kemahiran
Generik Hijau dalam
Kalangan Pelajar
Kejuruteraan Awam
2017/
Completed
Main Supervisor
2. Wan Nurul Nadia binti Wan
Sallehudin
Kaedah Penerapan
Kemahiran Berfikir Aras
Tinggi Dalam Pengajaran
Bagi Guru Reka Bentuk
dan Teknologi di Daerah
Skudai, Johor
2017/Completed Main Supervisor
3. Siti Khadijah binti Rahmad Tahap Kemahiran
Generik Hijau dalam
Kalangan Pelajar
2013 – 2015/
Completed
Main Supervisor
17
Pendidikan Teknik dan
Vokasional di Universiti
Teknologi Malaysia
4. Emeliana binti Elias Ciri-ciri Inovasi Pelajar
Pendidikan Teknik dan
Vokasional
2013/
Completed
Main Supervisor
5. Nasriah binti Sudin Penglibatan Pelajar
dalam Program Formal
Pendidikan dan Latihan
Teknik dan Vokasional di
Institusi Awam di
Malaysia Mengikut
International Standard
Classification of
Education
2010/
Completed
Main Supervisor
6. Syarina binti Ramli Model Kemahiran
Employability bagi Pelajar
Fakulti Pendidikan, UTM
2009/
Completed
Main Supervisor
Undergraduate Student
1. Franklin anak Bala,"Aplikasi M-pembelajaran Berasaskan Sistem Android Bertajuk Unjuran
Ortografik Tahun Dua Kolej Vokasional." 2015 - 2016.
2. Mohammad Khairil Ibraq bin Mohamad Badi, "Modul Pembelajaran Kendiri Vokasional Kerja
Melepa, Bahan Sanitari, Saliran dan Pembentungan bagi Kursus Teknologi Pembinaan."
2014 - 2015.
3. Nor Faralia binti Ngadirin, "Modul Pembelajaran Kendiri Bertajuk Penyediaan Tapak Bina
bagi Pelajar Jurusan Teknologi Pembinaan." 2013 - 2014.
4. Muhammad Faathir bin Basar, " Penggunaan Enapcemar Sungai dalam Pembuatan Bata."
2012 - 2013.
5. Saidatun Nor binti Awang, "Pembangunan Instrumen Kemahiran Berfikir Kreatif dalam
kalangan Pelajar Pendidikan Teknik dan Vokasional." 2011 - 2012.
6. Norsalmi binti Ramli, "Pembangunan Instrumen Penyelesaian Masalah Kreatif Pelajar
Pendidikan Teknik dan Vokasional (CIPSTVE)." 2011 - 2012.
7. Mashitoh binti Mahadi, "Pembangunan Instrumen Gaya Penyelesaian Masalah dalam
kalangan Pelajar Pendidikan Teknik dan Vokasional (PILs)." 2011 - 2012.
8. Nor Nasarah binti Kamal, "Pembangunan Instrumen Kemahiran Employabiliti Pelajar
Pendidikan Teknik dan Vokasional (i-tvees)." 2011 - 2012.
9. Saiful Amri bin Mohd. Ali, "Membangunkan Mesin Shuttlecock Launcher untuk Latihan
Pukulan Smash dalam Permainan Badminton (Sistem Pelancar)." 2011 – 2012.
18
10. Wan Mohd. Elyas bin Wan Deraman, "Membangunkan Mesin Pelancar Bulu Tangkis untuk
Latihan Pukulan Smash dalam Sukan Badminton (Reka Bentuk dan Bahan)." 2011 - 2012.
11. Sazari bin Sapawi, "Membangunkan Mesin Pelancar Bulu Tangkis untuk Latihan Latih Tubi
Pukulan Smash dalam Sukan Badminton (Sistem Feeder)." 2011 – 2012.
12. Azimah binti Mohd. Ajis, "Penguasaan Bahasa Inggeris dalam kalangan Pelajar SPH di UTM
Skudai Johor." 2008 - 2009.
13. Toh Yin Leei, "Pembangunan Perisian E-Kamus Visual Berasaskan Web bagi Topik Struktur
Bangunan dalam Kursus Asas Teknologi Kejuruteraan." 2009 - 2010.
14. Mohd. Samsulnahar bin Mohd. Yusof, "Membina B-ramp untuk Sukan Boccia Kategori BC3."
2009 - 2010.
15. Chia Peggie, "Pembangunan Perisian E-Glossary Berasaskan Web bagi Pembinaan." 2009 -
2010.
16. Mazlisa Banu binti Mohd. Faruk, "Pembinaan Modul Pembelajaran Kendiri Tajuk Peralatan
Tangan dan Tanggam dalam Kerja Kayu bagi Kursus Teknologi Kayu." 2009 - 2010.
17. Zulkifli bin Josti, "Pelaksanaan Mata Pelajaran Kemahiran Hidup di Sekolah Rendah di
Daerah Sabak Bernam." 2008 - 2009.
18. Emy Mastura binti Zulkifli, "Pembangunan Perisian Multimedia Berkonsepkan Teori
Konstruktivisme bagi Lukisan Tangen." 2008 - 2009.
19. Joelymond bin Raymund, "Perlaksanaan Pengajaran Mata Pelajaran Kemahiran Hidup di
Sekolah Menengah Daerah Beaufort, Sabah." 2008 - 2009.
20. Chiew Kai Wan, "Persepsi Guru Terhadap Penggunaan Perisian Multimedia dalam Proses
Pengajaran dan Pembelajaran Mata Pelajaran Kemahiran Hidup Sekolah Jenis Kebangsaan
Cina." 2008 - 2009.
21. Azman bin Ripin, "Kesediaan Kerja dikalangan Pelajar Fakulti Kejuruteraan Elektrik
Universiti Teknologi Malaysia." 2008 - 2009.
22. Adibah binti Abd. Rahim, "Tahap Penguasaan Bahasa Inggeris sebahgai Persediaan untuk
Kerjaya dalam kalangan Pelajar Pendidikan Teknikal dan Kejuruteraan." 2008 - 2009.
23. Lely Khalilah binti Abd. Kamar, "Pembangunan Perisian Multimedia Berkonsepkan Teori
Konstruktivisme bagi Lukisan Persilangan." 2008 - 2009.
24. Ain Aisyarina binti Hamadin, "Kesediaan Pelajar Pendidikan Teknikal dan Kejuruteraan
Universiti Teknologi Malaysia untuk Mengajar Mata Pelajaran Kemahiran Hidup dalam
Bahasa Inggeris." 2008 - 2009
25. Malisa Aini Noor binti A. Malek, "Kesediaan Pelajar Pendidikan Teknikal dan Kejuruteraan
dalam Menceburi Bidang Keusahawanan." 2008 - 2009.
26. Dzufi Iszura binti Ispawi, "Faktor-faktor yang Mempengaruhi Pemilihan Bidang
Keusahawanan sebagai Kerjaya dalam kalangan Pelajar Pendidikan Teknikal dan
Vokasional." 2007 - 2008.
27. Nik Mohd. Amir bin Nik Ab. Aziz, "Faktor yang Mempengaruhi Kreativiti Pelajar Tingkatan 4
dalam Mata Pelajaran Reka Cipta." 2007 - 2008.
28. Mohd. Fairul bin Mohamad Nawai, "Amalan Penyelesaian Masalah Secara Kreatif di dalam
mata Pelajaran Reka Cipta di kalangan Pelajar SPH." 2007 - 2008.
19
29. Subri bin Mohd. Nor, "Tinjauan Terhadap Guru di Sekolah Menengah Teknik Negeri Johor
Terhadap Penerapan Kemahiran Generik dalam Proses Pengajaran dan Pembelajaran Mata
Pelajaran Kejuruteraan." 2007 - 2008.
30. Mazyla binti Mokhtar, "Aplikasi Teknologi Maklumat dan Komunikasi (ICT) dalam
Meningkatkan Pengajaran dan Pembelajaran oleh Guru Teknikal (Awan, Elektrik dan
Jentera) Sekolah Menengah Teknik di Negeri Selangor." 2003 - 2004.
31. Lim Yee Chian, "Faktor-faktor yang mempengaruhi Kepuasan Kerja di kalangan Guru
Teknikal di Sekolah Menengah Teknik : Satu Kajian di Negeri Kedah Darul Aman." 2003 -
2004.
32. Lim Ai Hui, "Keupayaan Mengajar Guru-guru Kemahiran Hidup dalam Bahagian Teras bagi
Sukatan Pelajaran Baru Tingkatan Satu : Satu Tinjauan di Sekolah-sekolah Menengah
Kawasan Skudai." 2003 - 2004.
33. Nur Rabbuaah binti Haji Ismail, "Faktor-faktor yang Mendorong Pertukaran Bidang oleh
Graduan Kejuruteraan ke dalam Bidang Pendidikan ke atas Pelajar-pelajar Sarjana Muda
Teknologi serta Pendidikan di Universiti Teknologi Malaysia." 2003 - 2004.
34. Kua Wee Hong, "Cabaran Pelajar -pelajar Aliran Vokasional di SMT Naik Taraf di Negeri
Johor." 2002 - 2003.
35. Mimi Mohaffyza binti Mohamad, "Faktor-faktor yang Mempengaruhi Suri Rumah Menyertai
Industri Kampung di Mulim Sri Gading, Batu Pahat, Johor." 2002 - 2003.
36. Mohamad Azam bin Hussain, "Peluang Kerjaya Pelajar-pelajar Kursus Kemahiran dan
Teknikal di Kolej Yayasan Pelajaran Johor." 2002 - 2003.
37. Hazlina binti Harun, "Persepsi Pelajar Orang Asli tentang Pendidikan Teknik dan Vokasional
: Satu Tinjauan di Daerah Temerloh, Pahang." 2002 - 2003.
38. Norsuhainy binti Ibrahim, "Tahap Pengetahuan dan Kemahiran Pengajar Pendidikan Teknik
dan Vokasional bagi Orang Kurang Upaya dalam Pelaksanaan Pengajaran dan
Pembelajaran di Kelas-kelas Khas." 2002 - 2003.
39. Nornazalishah binti Ahmad Lias, "Tinjauan terhadap Kemahiran Teknik dan Vokasional di
Institusi Latihan Perindustrian di Negeri Johor bagi Melahirkan Pelatih yang memenuhi
Keperluan Industri." 2002 - 2003.
40. Chin Wee Siong, "Persepsi Pelatih terhadap Latihan Kemahiran di Pusat Latihan Teknologi
Tinggi (ADTEC) di Negeri Johor." 2002 - 2003.
41. Saidi bin Said, "Persepsi Pelajar Perempuan Tingkatan 4 Aliran Vokasional Terhadap latihan
Amali Kerja Bata di Sekolah Menengah Teknik di Negeri Pahang." 2001 - 2002.
42. Zaini bin Che Lah, "Persepsi Guru Pembimbing Terhadap Guru Pelatih Semasa Menjalani
Latihan Mengajar di Sekolah Menengah Teknik di Negeri Pahang." 2001 - 2002.
43. Thayalan a/l Supramani, "Persepsi Guru-guru Pelatih UTM terhadap Peranan Penyelia
Bersekutu di Sekolah Semasa Menjalani Latihan Mengajar." 2001 - 2002.
44. Wan Mohd. Hanif bin Wan Hamzah, "Satu Tinjauan Tentang Pengaruh Faktor Minat, Sikap
dan Persekitaran dalam Pembelajaran Teknologi Automotif di kalangan Pelajar Tingkatan
Empat di Tiga Buah Sekolah Menengah Teknik di Negeri Kelantan." 2001 - 2002.
45. Yasin bin Yusoff, "Tinjauan Terhadap Motivasi, Sahsiah dan Sikap Pelajar Tingkatan Empat
Aliran Vokasional di SMV Naik Taraf kepada SMT di Kelantan." 2001 - 2002.
20
46. Yahya bin Akelah, "Kajian ke atas Pelaksanaan Pendekatan Pembelajaran Masteri dalam
Aliran Vokasional di SMT Negeri Sembilan." 2001 - 2002.
47. Zalina binti Muhammad Zainudin, "Persepsi Tenaga Pengajar Vokasional Terhadap Program
Vokasional di Pusat Serenti di Negeri Johor Darul Takzim." 2001 - 2002.
48. Foong Mang Kit, "Faktor-faktor Yang Mempengaruhi Aliran Teknik dan Vokasional di
kalangan Pelajar Kaum Cina : Satu Tinjauan di Sekolah Akademik di Daerah Skudai." 2000 -
2001.
49. Nurhaslinda binti Hadli, "Kajian Terhadap Kefahaman Konsep bagi Pembinaan Geometri
serta Teknik Pembelajaran yang Diamalkan dalam Lukisan Geometri di kalangan Pelajar
Aliran Vokasional di SMT Daerah Johor Bahru." 2000 - 2001.
50. Fauziah binti Mohd. Noor, "Satu Tinjauan Kesesuaian Mata Pelajaran Pengkhususan
Kejuruteraan Awam Terhdap Pelajar Sarjana Muda Teknologi Serta Pendidikan
(Kejuruteraan Awam) Sebagai Persediaan Mangajar Mata Pelajaran Pengajaian
Kejuruteraan Awam di Sekoalh Menengah Teknik." 2000 - 2001.
51. Karpagam a/p Gurusamy, "Suatu Kajian Terhadap Tahap Celik Komputer di kalangan
Mahasiswa Tahun Satu Fakulti Pendidikan, Unversiti Teknologi Malaysia." 2000 - 2001.
52. Mohd. Khaizalamin bin Kadir, "Tahap Kesediaan Guru Pelatih Lelaki mengajar Mata
Pelajaran Elektif Kemahiran Hidup Ekonomi Rumah Tangga." 2000 - 2001.
53. Azidi binti Sarudin, "Tahap Kesediaan Pelajar Tahun 3STP UTM Terhadap Latihan
Mengajar." 1999 - 2000.
54. Che Rejuna bin Che Lah, "Satu Tinjauan ke atas Amalan Kebersihan di kalangan
Pengusaha Kedai Makan di dalam Kawasan Pentadbiran Majlis Daerah Kota Bharu,
Kelantan." 1999 - 2000.
55. Nor Suhailah binti Jusah, "Pengaruh Kafe Siber Terhadap Pembentukan Sahsiah Remaja
Mas Kini : Satu Tinjauan." 1999 - 2000.
56. Md. Zamsuri bin Harjin, "Rekabentuk Acuan Pasir Berukir." 1999 - 2000.
57. Samsul Bahri bin Abd. Hamid, "Kajian Rekabentuk Alat Penyegar Makanan." 1999 - 2000.
58. Junainah binti Tarif, "Faktor-faktor yang Mempengaruhi Pencapaian Pelajar Melayu dalam
Mata Pelajaran Prinsip Akaun di Daerah Kulai." 1999 - 2000.
59. Ismail bin Tamby Chik, "Penilaian Diri Pelajar Kejuruteraan Awam Universiti Teknologi
Malaysia, Skudai Terhadap Ciri-ciri Seorang Jurutera Awam Menurut Kehendak Institusi
Jurutera Malaysia." 1999 - 2000.
POSTGRADUATE EXAMINATION/VIVA
UTM Students/Viva-Voce
1. Chairman of the Med Viva for Yuzamri Yusoff, 7 March 2017.
2. Co-Chairman of the PhD Viva Panels for Zhang Yong, 4 December 2016.
3. Co-Chairman of the PhD Viva Panels for Sada Adamu Maigari, 25 September 2016.
4. Co-Chairman of the PhD Viva Panels for Siti Dahlia Said, 13 September 2016.
5. Co-Chairman of the PhD Viva Panels for Zulkifli, 24 December 2013.
21
MEd Internal Examiner
1. Nurashikin binti Jubri, “Kesedaran Pemakaian Bra Sukan dan Corak Pergerakan Payu Dara
dalam kalangan Atlet Remaja.” Master of Philosophy, May 2015.
2. Dian Dianti binti Jumaat, “Hubungan Kepercayaan Penyeliaan dengan Gaya Kepimpinan
Guru Penolong Kanan Terhadap Guru Kemahiran Hidup Sekolah Rendah di Pasir Gudang”,
Master of Education, Dec 2013.
3. Jamaliah binti Mohd. Jamal, “Kesediaan Guru Terhadap Pelaksanaan Penataran
Pentaksiran Berasaskan Sekolah Kemahiran Hidup Bersepadu Tingkatan Satu” Master of
Education, Mei 2013.
PUBLICATIONS
JOURNAL
Scopus Journal :
1. Nor Fadila Amin, Adibah Abdul Latif, Mahyuddin Arsat and Nornazira Suhairom (2017).
“Measuring Changing of Problem Solving Ability Using Rasch Measurement Model”. Advanced
Science Letters, 23 (1), 117 – 120.
2. Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Azlan Latib and Nurul Ida Mohd.
Azmi (2017). “International Teaching Practice in Technical and Vocational Education.”
Advanced Science Letters, 23 (1), 647 – 650.
3. Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib and Nor Fadila Amin (2017). “A
Conceptual Model of Scenario Based Learning for Developing Higher Order Thinking Skills in
Engineering." Advanced Science Letters, 23(1), 194-196.
4. Mahyuddin Arsat, Nor Fadila Amin, Adibah Abdul Latif and Rashidah Arsat (2017).
“Integrating Sustainability in a Student-Centered Learning Environment for Engineering
Education”. Advanced Science Letters, 23 (1), 651 - 655.
5. Yusri Bin Kamin, Azlan Abdul Latib, Nor Fadila Amin, and Muhammad Sukri Saud (2017).
“Technical Skills Competency Level Among Students at Vocational Colleges in Malaysia.”
Advanced Science Letters, 23 (1), 573 - 576.
6. Azlan Abdul Latib, Nor Fadila Amin, Muhammad Sukri Saud, and Yusri Kamin (2017).
“Impact of a Service Learning Program to the University and the Community.” Advanced
Science Letters, 23 (1), 596 - 599.
7. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Amin, Dayana Farzeeha Ali and
Umawathy Techanamurthy (2017). “A Framework of Culinary-Specific Competencies for
Sustainable Professional Development in Gastronomic Tourism.” International Information
Institute (Tokyo). Information 19, no. 10B (2016): 4683.
8. Nor Aisyah Che Derasid, Aede Hatib Musta’amal. Nor Fadila Amin, and Abdul Rashid
Husain. “Content Validity for Innovation Level of UTM Undergarduate Students: A Quantitative
Approach.” Man In India, 96(1-2), 477-488
22
9. Adibah Abdul Latif, Nor Fadila Amin and Wilfredo Herrera Libunao (2016). "Multiple Choice
Item Analysis Using Classical Test Theory and Rasch Measurement Model." Man in India, 19
(1-2), 173 - 181.
10. Nornazira, S., Aede, H. M. A., Fadila, M. A. N., Mahani, M., & Husna, A. W. N. (2015)." A
Needs Assessment for the Development of a Competency Model for Culinary
Professionals." Advanced Science Letters, 21(6), 1662-1665.
11. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Amin and Noor Khairul Anuar
Johari. “A Preliminary Study of the Needs for the Development of Competency Measurement
Instrument for Malaysian Chefs”. Pertanika Journal of Social Sciences & Humanities, 23.
12. Nazira Suhairom, Aede Hatib Musta'amal, Nor Fadila Mohd. Amin and Noor Khairul Anuar
Johari (2014). "The Development of Competency Model and Instrument for Competency
Measurement : The Research Methods." Procedia-Social and Behavioral Sciences, 152, 1300
- 1308. (ISI indexed). http://dx.doi.org/10.1016/j.sbspro.2014.09.367
13. Nor Fadila Amin, Muhamad Sukri Saud, Yahya Buntat and Adibah Abdul latif (2013). "The
Application of Rasch measurement Model in Measuring Change in Students Self-Directed
Learning Readiness." Advanced Science Letters. 19 (22), 3736 - 3738. (SCOPUS indexed).
http://dx.doi.org/10.1166/asl.2013.5242
14. Muhammad Sukri Saud, Mohd. Hizwan Mohd. Hisham, Mohd. Safarin Nordin, Nor Fadila
Amin and Yahya Buntat (2013). "Cooperative Problem Based Learning (CPBL) Model : A
Technical Review." Advanced Science Letters. 19 (22), 3637 - 3638. (SCOPUS indexed).
http://dx.doi.org/10.1166/asl.2013.5227
Non-Refereed Journal
1. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Mohd. Amin, Muhammad Khair
Nordin and Dayana Farzeeha Ali (2016). “Quality indicators in the field of culinary
professions in Malaysia - a method of developing competency profiling through self-
assessment.” The Online Journal for Technical and Vocational Education and Training in
Asia, 7.
2. Asnul Dahar Minghat, Nor Fadila Amin, Ruhizan M. Yasin and Ramlee Mustapha (2014).
"Pembinaan Indikator Kelestarian Pendidikan Teknikal dan Vokasional Sekolah Menengah
Harian Melalui Kajian Delphi." Sains Humanika, 2(4).
3. Saud, M. S., Rajuddin, M. R., Ismail, S., Nordin, M. S., Minghat, S. D., Subari, K., Amin, N.
F. & Arsat, M. (2010). "ICT Application in Vocational and Technical Education and Training
(TVET) Onstitutions in malaysia. " SEAVERN Journals, 2(1).
4. Rajuddin, M. R., Ibrahim, Z., Ismail, S., Udin, A., Abdul Latib, A. and Mohd. Amin, N.F.
(2008). "The Expectation of the Small and Medium Enterprises in Malaysia." SEAVERN
Journal. 1 (1).
5. Nor Fadila Amin & Widad Othman (1999), "Persepsi Guru Terhadap Cabaran Pelaksanaan
Mata Pelajaran Elektif KBSM", Jurnal Penyelidikan Pendidikan, 1(1), 15 - 28.
23
Book
1. Mohd. Shuisma Mohd. Amail, Bahrain Abu, Rubita Sudirman, Lim Cheng Song, Fauzan
Khairi Che Harun, Maheza Irma Mohamad Salim, Nor Fadila Mohd. Amin, Nor Bahiah
Ahmad, Zainuddin Abu Bakar and Mahyuddin Arsat (2016). High Impact Educational
Practices (HEIPs). In Rose Alinda Alias and Baharuddin Aris (Eds). A Guide to New
Academia Learning Innovation (1st edition). pp. 63 – 79, ISBN 978-967-0194-71-4.
Book Chapter
1. Widad Othman, Nor Fadila Mohd. Amin, Halijah Ibrahim and Muhammad Sukri Saud
(2008). "Tahap Kesediaan Arah Diri Pelajar Dewasa dan Reka Bentuk Scaffolding dalam
Pembelajaran Reka Cipta Secara Online." In ICT Dalam Pendidikan Teknik dan Vokasional.
pp. 99 - 114. ISBN 978-983-52-0513-2.
Classified/Technical Report
1. Abdul Rashid Hussein, Aede Hatib Musta’amal, Nor Fadila Amin, Mohd. Azhar Abd. Hamid,
Abd. Rahman Tamuri, Norma Alias, Mohd. Bakri Bakar, Hairudin Abdul Majid, Azurah A
Samah and Normal Jusoh (2015). “Innovation Competition : Lighting, Improving Community &
Creative Souvenir : Report 2015”. UTM Centre of Student Innovation, Johor Bahru.
Proceedings/Conference International
1. Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib, Haslina Sulfani
Mohd. Hanapiah and Nor Hasmida Mohd. Noor, “The Aftermath of Transformation of Malaysia
Vocational Education System on Early Childhood Studies in Vocational Colleges.” 2017 2nd
Advanced Researchon Business, management and Humanities (ARBUHUM 2017). Oct 10 –
12, Patong Resort Hotel, Phuket, Thailand.
2. Yusri bin Kamin, Azlan Abdul Latib, Nor Fadila Amin, Muhammad Sukri Saud and Adnan
Ahmad, “Work-based Learning: Employer Perspective towards the Automotive Industry.” 2017
2nd Advanced Researchon Business, management and Humanities (ARBUHUM 2017). Oct
10 – 12, Patong Resort Hotel, Phuket, Thailand.
3. Muhammad Muhammad Inti, Azlan Abdul latib, Shola Francis Bakare, Yusri Kamin and Nor
Fadila Amin. “Pedagogical Approaches Required for Fostering Interpersonal Skills among
Mechanical Engineering Technology Students.” 2017 2nd Advanced Researchon Business,
management and Humanities (ARBUHUM 2017). Oct 10 – 12, Patong Resort Hotel, Phuket,
Thailand.
4. Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib and Nor Fadila Amin, “Setup,
Maintenance and Troubleshooting of Computer System Skills for Technical and Vocational
Education Teachers.” 2017 2nd Advanced Researchon Business, management and
Humanities (ARBUHUM 2017). Oct 10 – 12, Patong Resort Hotel, Phuket, Thailand.
5. Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib, Adibah Abdul Latif
and Haslina Sulfani Mohd. Hanapiah, “Implications of Malaysian Technical and Vocational
24
Education Transformation on the Implementations of Early Childhood Studies in Vocational
Colleges.” Asia International Multidisciplinary Conference (AIMC 2017). May 1 - 2, Universiti
Teknologi Malaysia.
6. Yusri Bin Kamin, Azlan Abdul Latib, Nor Fadila Amin and Muhammad Sukri Saud, “What
Employers says about Work-Based Learning.” Asia International Multidisciplinary Conference
(AIMC 2017). May 1 - 2, Universiti Teknologi Malaysia.
7. Franklin Bala, Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Mahyuddin Arsat and
Adibah Abdul Latif, “M-Note Application Based on Android System in Learning Orthographic
Projections in Vocational Colleges. ” International Symposium on Innovation Education and
Technology (ISIET 2017). May 11-12, Asia Airport Hotel, Bangkok, Thailand.
8. Mahyuddin Arsat, Nor Fadila Amin, Adibah Abdul Latif and Hasnah Mohamed, “Impact of
Sustainable Design and Computational Thinking Towards Students’ Learning Experience.”
International Symposium on Innovation Education and Technology (ISIET 2017). May 11-12,
Asia Airport Hotel, Bangkok, Thailand.
9. Yusri Kamin, Muhammad Sukri Saud, Nor Fadila Amin and Asnul Dahar Minghat, “Pedagogy
Practices between Australia’s TAFE abd Malaysia’s Community College : Lecturer Views.”
International Symposium on Innovation Education and Technology (ISIET 2017). May 11-12,
Asia Airport Hotel, Bangkok, Thailand.
10. Nurzalina binti Hashim, Muhammad Sukti Saud, Yusri Kamin and Nor Fadila Amin.
“Developing Students’ Higher Order Thingking Skills (HOTS)in the Classroom for Design and
Technology.” International Symposium on Innovation Education and Technology (ISIET 2017).
May 11-12, Asia Airport Hotel, Bangkok, Thailand.
11. Nor Hasmida Mohd. Nor, Nor Fadila Amin, Adibah Abdul Latif and Mahyuddin Arsat (2017).
“Competencies Framework for Elderly Caregivers in Malaysia”. International Conference on
Aplied Psychology and Counseling (ICACP-2017). Feb. 8-9, Le Grandeur Palm Resort, Johor
Bahru, Johor.
12. Adibah Abdul Latif, Mohd. Tajuddin Ninggal, Mashayekhi, Nor Fadila Amin and Mahyuddin
Arsat (2017). “Developing Hierarchical of Mental Health Based on Homesickness : Item
Response Theory Approach”. International Conference on Aplied Psychology and
Caounseling (ICACP-2017). Feb. 8-9, Le Grandeur Palm Resort, Johor Bahru, Johor.
13. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Amin and Arasinah Khamis (2016).
“Resolving the Conundrum of Superior Performers in Organizations: Competency”. Innovative
Practices in Education and Industry Exhibition 2016. March 14. Universiti Teknologi Malaysia,
Skudai.
14. Adibah Abdul Latif, Suheibah Sobaki, Ibnatul Jalilah Yusof and Nor Fadila Amin (2016).
“Kicking Out the Items: Discrimination Index and Item Fit Analysis Approaches”. International
Conference On Education High Order Thinking Skills 2016 (ICES HOTS 2016). April 11 – 13,
Universiti Teknologi Malaysia, Skudai.
15. Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib and Nurul Ida
Mohd. Azmi (2016). “International Teaching Practice in Technical and Vocational Education”.
2016 Advanced Research on Business, Management and Humanities (ARBUHUM2016).
March 15 – 17, Bandung, Indonesia.
25
16. Nor Fadila Amin, Adibah Abdul Latif, Mahyuddin Arsat and Nornazira Suhairom (2016).
“Measuring Changing of Problem Solving Ability Using Rasch Measurement Model”. 2016
Advanced Research on Business, Management and Humanities (ARBUHUM2016). March 15
– 17, Bandung, Indonesia.
17. Yusri Kamin, Azlan Abdul Latib Nor Fadila Amin and Muhammad Sukri Saud (2016).
“Technical Skills Competency Level among Students at Vocational Colleges in Malaysia.”
2016 Advanced Research on Business, Management and Humanities (ARBUHUM2016).
March 15 – 17, Bandung, Indonesia.
18. Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib and Nor Fadila Amin (2016). “A
Conceptual Model of Scenario Based Learning for Developing Hots in Engineering Education”.
2016 Advanced Research on Business, Management and Humanities (ARBUHUM2016).
March 15 – 17, Bandung, Indonesia.
19. Azlan Abdul Latib, Nor Fadila Amin, Muhammad Sukri Saud and Yusri Kamin (2016). “Impact
of a Service Learning Program to the University and the Community”. 2016 Advanced
Research on Business, Management and Humanities (ARBUHUM2016). March 15 – 17,
Bandung, Indonesia.
20. Mahyuddin Arsat, Nor Fadila Amin, Adibah Abdul Latif and Rashidah Arsat (2016).
“Integrating Sustainability in a Student-Centered Learning Environment for Engineering”. 2016
Advanced Research on Business, Management and Humanities (ARBUHUM2016). March 15
– 17, Bandung, Indonesia.
21. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Mohd. Amin, Dayana Farzeeha Ali
and Umawathy Techanamurthy (2016). “A Framework of Culinary-Specific Competencies for
Sustainable Professional Development in Gastronomic Tourism.” 2016 1st International
Conference on Information in Business and Technology. November 26 – 28, Melaka :
MALTESAS.
22. Crystal Joan Peter, Wilfredo Herrera Libunao, Nor Fadila Amin, Adibah Abdul Latif and
Mahyuddin Arsat (2016).” Preliminary Research on Sustainable Development Integration in
Malaysian University”. Technical And Vocational Education & Training International
Conference 2016 (TVETIC 2016). November 18 – 20, KSL Hotel and Resort , Johor Bahru.
23. Nadiah Yusof, Mahyuddin Arsat, Nor Fadila Amin, and Adibah Abdul Latif (2016). “Malaysia's
Model for Sustainable Campus”. Technical And Vocational Education & Training International
Conference 2016 (TVETIC 2016). November 18 – 20, KSL Hotel and Resort , Johor Bahru.
24. Nor Fadila Amin, Adibah, Abdul Latif, Wilfredo Herrera Libunao, Sarimah Ismail, Mahyuddin
Arsat and Nornazira Suhairom (2015). "The Application of Rasch Measurement Model in
Measuring Changes of Students' Perceptions on Their Problem Solving Ability." 1st
International Conference of Educational Studies (ICES2015). June 3 - 4, Pulai Spring Resort,
Johor Bahru, Johor.
25. Leong Ting Chee, Nor Fadila Amin, Adibah Abdul Latif and Siti Aisyah Muhammad (2015).
"Development of Teaching and Learning Module to Enhance Creativity of Preschoolers. " 1st
International Conference of Educational Studies (ICES2015). June 3 - 4, Pulai Spring Resort,
Johor Bahru, Johor.
26. Adibah Abdul Latif, Ibnatul Jalilah Yusof, Nor Fadila Mohd. Amin and Wilfredo Herrera
Libunao (2015). "Score Interpretation Using Classical Test Theory and Item Response
26
Theory." 1st International Conference of Educational Studies (ICES2015). June 3 - 4, Pulai
Spring Resort, Johor Bahru, Johor.
27. Nor Aisyah Che Derasid, Aede Hatib Musta'amal , Nor Fadila Amin and Abdul Rashid
Hussain (2015). "Content Validity for Innovation Level of UTM undergraduate Students : A
QUalitative Approach." 1st International Conference of Educational Studies (ICES2015). June
3 - 4, Pulai Spring Resort, Johor Bahru, Johor.
28. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Mohd. Amin and Adibah Abdul Latif
(2015). “Reliability and Validity Evidence of Instrument Measuring Competencies for Superior
Work Performance”. Proceedings of Pacific Rim Objective Measurement Symposium
(PROMS) 2015 Conference. Aug 20 – 24, Singapore : Springer, 323 – 338.
29. Nornazira Suhairom, Aede Hatib Musta'amal, Nor Fadila Mohd. Amin and Noor Khairul
Anuar Johari (2014). "The Needs for the Development of Instrument for Measuring Culinary
Competencies Among Malaysian Chefs". The 3rd International Conference on Humanities and
Social Sciences (ICHSS2014). June 3 - 5, Kuala Lumpur Convention Centre.
30. Nornazira binti Suhairom, Aede bin Musta’amal and Nor Fadila binti Mohd. Amin (2014).
“Validity and Reliability of Instrument Measuring Culinary Competencies : The Rasch
Measurement Model.” Proceedings of the 1st International Postgraduate Seminar 2014. 23 –
24 November. Johor Bahru : Faculty of Education, UTM, 1 – 5.
31. Mashitoh Mahadi, Nor Fadila Mohd. Amin, Adibah Abdul Latif, Aede Musta'amal, Sarimah
Ismail, Mohd. Safarin Nordin and Mohd. Najib Ghaffar (2013). “Pembangunan Instrumen Gaya
Penyelesaian Masalah dalam Kalangan Pelajar Pendidikan”. Proceedings of the 2nd
International Seminar on Quality and Affordable Education (ISQAE2013). Oct 7 – 10. Johor
Bahru, Johor, 500 – 505.
32. Kamalularifin Subari, Maliani Mihamad, Nor Fadila Mohd. Amin, Asnul Dahar Minghat,
Sarimah Ismail and Yusri Kamin (2013). "Meninjau Kemahiran Insaniah Pelatih Institut Latihan
Perindustrian (ILP) dalam Kerjaya. " Proceedings of the 2nd International Seminar on Quality
and Affordable Education (ISQAE2013). Oct 7 – 10. Johor Bahru, Johor, 40 – 44.
33. Sarimah Ismail, Wan Zulkhairi Zakaria and Nor Fadila Amin (2013). "Struktur Kurikulum
Program Diploma Pendidikan Lepasan Ijazah Pendidikan Teknikal dan Vokasional. "
Proceedings of the 2nd International Seminar on Quality and Affordable Education
(ISQAE2013). Oct 7 - 10, Johor Bahru, Johor, 482 – 490.
34. Aede Hatib Musta'amal, Norzanah Rosmin, Nor Fadila Mohd. Amin and Yahya Buntat
(2013). "Rekacipta : Ke Arah Pemupukan Budaya Kreatif dan Inovatif." Proceedings of the 2nd
International Seminar on Quality and Affordable Education (ISQAE2013). Oct 7 - 10, Johor
Bahru, Johor, 229 - 233
35. Mohd. Safarin bin Nordin, Nor Fadila binti Mohd. Amin, Kamalularifin bin Subari and Mohd.
Zolkifli bin Abdul Hamid (2012). "Visualization Skills and Learning Style Patterns Among
Engineering Students at Universiti Teknologi Malaysia." World Conference on Learning,
Teaching and Administration (WCLTA 2012), Oct 28 - 30, University of Barcelona, Barcelona,
Spain.
36. Adibah Abdul Latif, Zairul Nur Deana Md. Desa, Mohd. Najib Ghaffar and Nor Fadila Amin
(2011). "Development and Validation of Moral Assessment Instrument for Higher Education
Students." International Conference on Measurement and Evaluation in Education
27
(ICMEE2011). Oct 10 - 12, Univesiti Sains Malaysia, Penang.
37. Wilfredo Herrera Libunao, Adibah Abdul Latif, Nor Fadila Mohd. Amin and Dayang Hjh Tiawa
Abd. Hamid (2011). "Assessing the Utilization of Research Findings in technical and
Vocational Education Policy Making in Malaysia." International Conference on Measurement
and Evaluation in Education (ICMEE2011). Oct 10 - 12, Univesiti Sains Malaysia, Penang.
38. Nor Fadila Mohd. Amin and Muhammad Sukri Saud (2010). "e-Product Design : Learning
Design in Web-based Learning Environment." ." International Conference on VTET Research
and Networking. June 23 - 24, Brunei Darussalam.
39. Muhammad Sukri Saud, Muhammad Rashid Rakuddin, Sarimah Ismail, Mohd. Safarin Nordin,
Asnul Dahar Minghat, Kamalulariffin Subari, Nor Fadila Mohd. Amin, Mohd. Zulkifli Abdul
Hamid & Mahyuddin Arsat (2010). "ICT Application in Vocational and Technical Education
anfd Training (TVET) Institutions in malaysia." International Conference on VTET Research
and Networking. June 23 - 24, Brunei Darussalam.
40. Nor Fadila Amin, Muhammad Sukri Saud, Sarimah Ismail and Widad Othman (2007).
"eProductDesign : A New Perspective of Teaching and Learning Product Design for Adult."
The 2007 International Conference on e-Commerce, eAdministration, e-Society and e-
Education (e-CASE2007). Aug 15 - 17, Hong Kong.
41. Sarimah Ismail, Muhammad Sukri Saud, Nor Fadila Mohd. Amin and Mohd. Rizal Mohd.
Said (2007). "Customer Satisfaction Model of Malaysian Malay Restaurants." The 8th
International Joint World Cultural Tourism Conference. Nov 16 - 18, Busan, South Korea.
42. Widad Othman, Muhammad SUkri Saud and Nor Fadila Amin (2006). "How Can Web-based
:earning System Enhances Adults Learning in Product Design." 6th Annual South East Asian
Association for Institutional Research Conferences. Sept 5 - 7, Langkawi, Kedah.
43. Muhammad Sukri Saud, Nor Fadila Mohd. Amin, Widad Othman and Megat Aman Zahiri
Megat Zakaria (2005). " E-Learning Computer Technology Skills and Knowledge for Technical
and Vocational Teachers in Malaysia." International Symposium on E-Learning. July 25 - 26.,
Universiti malaysia Sabah, Sabah.
Proceedings/Conference (others)
1. Mahyuddin Arsat, (2016). “Sustainability and Innovation in Teacher Education Program”.
Proceedings of Seminar Kebangsaan Majlis Dekan Pendidikan Universiti Awam 2016.
November 13 – 15. TH Hotel, Bayan Lepas, Pulau Pinang, 32 – 38.
2. Asnul Dahar Minghat, Nor Fadila Amin, Ruhizan M. Yasin and Ramlee Mustapha (2012).
"Pembinaan Indikator Kelestarian Pendidikan Teknikal dan Voksional Sekolah Menengah
Harian Melalui Kajian Delphi." Seminar Kebangsaan Majlis Dekan Pendidikan IPTA
(MEDC2012). Oct 7 - 10, Johor Bahru, Johor.
3. Mohamad Bilal Ali, Lokman Mohd. Tahir, Meor Ibrahim Kamaruddin, Mohd. Ali Ibrahim
Megat Aman Zahiri Megat Zakaria, Nor Fadila Mohd. Amin, M. Al-Muzzamil Yasin and
Muhammad Sukri Saud (2011). "Penilaian Hasil Pembelajaran Program Latihan Mengajar :
Praktikaliti di Universiti Teknologi Malaysia." Seminar Majlis Dekan-Pendidikan IPTA
(MEDC2011). Sepr 27 - 28, Universiti Putra Malaysia, Serdang, Selangor.
28
4. Zainuddin Abu Bakar, Meor Ibrahim Kamaruddin, Nor Fadila Mohd. Amin, Mohd. Ali
Ibrahim, Megat Aman Zahiri Megat Zakaria and M. Al-Muzzamil Yasin (2010). "Creativity in
Teaching and Learning in the Faculty of Education of Malaysian Public Universities."
Seminar Majlis Dekan-Pendidikan IPTA (MEDC2010). Aug 2-3, Shah Alam, Selangor.
5. Nor Fadila Mohd. Amin and Muhammad Sukri Saud (2008). "Pelaksanaan Kursus Reka
Cipta : Pengalaman Pengajaran dan Pembelajran di UTM". Educational Postgraduate
Research Seminar (EDUPRES 2008). Dec 25 - 27, Universiti Teknologi Malaysia, Johor.
6. Muhammad Sukri Saud, Sarimah Ismail, Mohd. Safarin Nordin and Nor Fadila Mohd. Amin
(2005). "E-Learning Computer Technology : Issues and Challenges for Technical and
Vocational Teachers." Seminar Kebangsaan ICT dalam Pendidikan. Nov 17 - 19, Kuala
Lumpur.
7. Nor Fadila Mohd. Amin and Widad Othman (2004). "Pembinaan dan Penilaian Sistem
Pembelajaran Berasaskan Web Asas Reka Cipta Berdasarkan Teori Pembelajaran Dewasa :
Satu Kertas Konsep." National Conference on Graduate Research in Education. Sept. 11,
Universiti Putra Malaysia, Serdang, Selangor.
8. Nor Fadila Mohd. Amin and Widad Othman (1999). "Cabaran Pelaksanaan Mata Pelajaran
Elektif KBSM Lukisan Kejuruteraan di Sekolah Menengah Atas." Malaysia Educational
Research Association-Educational Research Association of Singapore Joint Conference
(MERA-ERA1999). December, Malacca.
COURSE/WORKSHOPS
1. Curriculum Design, Management and Development Level 3, AKEPT, 1 – 2 October 2017.
2. Curriculum Design, Management and Development Level 2, AKEPT, 21 – 22 August 2017.
3. Bengkel Bimbingan Tenaga Pengajar Kursus Tamadun Islam & Tamadun Asia (TITAS),
Kursus Hubungan Etnik dan Kursus Kenegaraan Malaysia, UUM, 16 – 17 August 2017.
4. Curriculum Design, Management and Development Level 1 I(Introductory), AKEPT, 25 – 26
July 2017.
5. The Course Outline of University General Courses, UTM 17 April 2017.
6. The Implementation of University General Courses, UTM, 10 July 2017.
7. The Teaching of Credited Co-Curriculum Courses - PUPW Diploma Programme, UTMKL; 9
June 2017.
8. Curriculum Design, Management and Development Level 1 I(Introductory), AKEPT, 25 – 26
July 2017.
9. Scholarship of Teaching and Learning – Advanced Level, Centre for Teaching and Learning
(CTL), UTM ; 12 – 13 October 2016.
29
REFEREES
1. Name : Professor Dr. Baharuddin bin Aris
Designation : Professor
Admin Position : Dean, Faculty of Education, UTM
Address : Faculty of Education
Universiti Teknologi Malaysia
81310 Johor Bahru, Johor MALAYSIA
Contact no : +607 5534258
Email : [email protected]
2. Name : Assoc. Prof. Dr. Muhammad Sukri Saud
Designation : Assoc. Prof.
Admin Position : Deputy Dean
(Research, Innovation, Community and Network)
Address : Faculty of Education
Universiti Teknologi Malaysia
81310 Johor Bahru, Johor MALAYSIA
Contact no : +607 5534405
Email : [email protected]