Curriculum Vitae · 2. Paper presented in National conference at Haryana College of technology &...
4
Kuldeep Kumar Saxena Personal Data Work Date of Birth: 1 st June 1981 Assistant Professor (On Leave) Place of Birth: Kanpur Department of Mechanical Engineering, Nationality: Indian 17 Km. Stone, Mathura-Delhi Road, Marital Status: Married P.O. - Chaumuhan, Telephone: +91-9336593202, GLA University, +91-9415058991 Mathura (U.P.) – 281406 INDIA Address: HN.-58, Block –I, Gujaini, Phone: +91-5662-250735, 250900, 250909 Kanpur (UP)-208022, INDIA Email: [email protected] Fax: +91-5662-241687 [email protected] Curriculum Vitae Education 2008-2010 M. Tech. in Material Science & Engineering Motilal Nehru National Institute of Technology, Allahabad, India Thesis: Modeling and simulation of carbon nanotube reinforced composites using molecular dynamics simulations. Supervisor: Dr. Mukul Shukla and Mr. Ashutosh Upadhyay Salient features: The objective of this work was to model & simulate the mechanical behavior of CNT reinforced polymer composites using molecular dynamics and to validate the results using rule of mixture. 2005-2008 B. Tech. in Mechanical Engineering M.P.E.C. Kanpur, India, affiliated to Uttar Pradesh Technical University, Lucknow, India. 1999-2002 Diploma in Instrumentation and Controls Govt. Polytechnic, Kanpur, India, affiliated to Board of Technical Education, Lucknow, India Research Profile Instrumentation Skills Thermo-mechanical simulator (GLEEBLE-3800 ®) for hot compression testing. DSC, DMA, TG-DTA for thermo-mechanical and viscoelastic characterization of materials. Composite samples fabrication by wet layup (with and without hot press), vacuum bagging and autoclave molding. MTS for Material testing. Computer Skills Foundation course in computer aided design. Working knowledge of windows and Linux environment with different simulation and modeling software as: AUTO CAD Material Studio 5.0 (Accelrys Inc.)
Transcript of Curriculum Vitae · 2. Paper presented in National conference at Haryana College of technology &...
KuldeepKumarSaxena
PersonalData WorkDateofBirth:1stJune1981 AssistantProfessor(OnLeave)PlaceofBirth:Kanpur DepartmentofMechanicalEngineering,Nationality:Indian 17Km.Stone,Mathura-DelhiRoad,MaritalStatus:Married P.O.-Chaumuhan,Telephone:+91-9336593202, GLAUniversity,+91-9415058991 Mathura(U.P.)–281406INDIAAddress:HN.-58,Block–I,Gujaini, Phone:+91-5662-250735,250900,250909Kanpur(UP)-208022,INDIAEmail:[email protected]
CurriculumVitae
Education2008-2010M.Tech.inMaterialScience&EngineeringMotilalNehruNationalInstituteofTechnology,Allahabad,IndiaThesis: Modeling and simulation of carbon nanotube reinforced composites usingmoleculardynamicssimulations.Supervisor:Dr.MukulShuklaandMr.AshutoshUpadhyaySalient features: The objective of this work was to model & simulate the mechanicalbehaviorofCNTreinforcedpolymercompositesusingmoleculardynamicsandtovalidatetheresultsusingruleofmixture.2005-2008B.Tech.inMechanicalEngineeringM.P.E.C.Kanpur,India,affiliatedtoUttarPradeshTechnicalUniversity,Lucknow,India.1999-2002DiplomainInstrumentationandControlsGovt.Polytechnic,Kanpur,India,affiliatedtoBoardofTechnicalEducation,Lucknow,IndiaResearchProfileInstrumentationSkills
Thermo-mechanicalsimulator(GLEEBLE-3800®)forhotcompressiontesting. DSC,DMA,TG-DTAforthermo-mechanicalandviscoelasticcharacterizationof
materials. Compositesamplesfabricationbywetlayup(withandwithouthotpress),vacuum
baggingandautoclavemolding. MTSforMaterialtesting.
ComputerSkills
Foundationcourseincomputeraideddesign. WorkingknowledgeofwindowsandLinux environmentwithdifferent simulation
andmodelingsoftwareas: AUTOCAD MaterialStudio5.0(AccelrysInc.)
OOF2(Microstructureanalysis) NanoEngineer-1 WorkedwithLAMMPS(MDSimulatorOpenware)
JournalPublications(International)
1. K.K.Saxena,S.Sonkar,R.Kumar,V.Pancholi,G.P.Chaudhari,D.Srivastava,G.K.Dey,S.K.Jha,N.Saibaba“EffectofTemperatureandStrainRateonDeformationBehaviorof Zirconium Alloy: Zr-2.5Nb-0.5Cu” Procedia Materials Science Volume 6, 2014,Pages188–193.
2. K.K. Saxena, S.D. Yadav, R. Kumar, V. Pancholi, G.P. Chaudhari, D. Srivastava, G.K.Dey, S.K. Jha, N. Saibaba “ Effect of Temperature and Strain Rate on DeformationBehaviorofZirconiumAlloy:Zr-2.5Nb” ProcediaMaterialsScienceVolume6,2014,Pages278–283.
3. Kuldeep K. Saxena, Achchhe Lal “Comparative Molecular Dynamics SimulationStudyofMechanicalPropertiesofCarbonNanotubeswithNumberofStone-WalesandVacancyDefects”ProcediaEngineering,Volume38,2012,Pages2347-2355.
4. Kamal Sharma,KuldeepKumarSaxena,MukulShukla “Effect ofMultiple Stone-WalesandVacancyDefectsontheMechanicalBehaviorofCarbonNanotubesUsingMolecularDynamics”ProcediaEngineering,Volume38,2012,Pages3373-3380.
ConferencePublications(International)
1. Paper presented in to an International conference, on the topic of “Mechanicalproperties evolution of Carbon Nanotube reinforced Polymer Composite usingMolecular Dynamics Simulation” authored by Kuldeep Kumar Saxena,A.K.Upadhyay, Mukul Shukla in the International conference (ECTACEM-2010)ISBN:978-93-80813-03-5,atIITKharagpur,27-29Dec.2010.
2. “Molecular Dynamics study of Mechanical Properties of Carbon-Nanotubereinforced LY556 composites” authored by Kamal Sharma,KuldeepKr. Saxena,Mukul Shukla in the reviewed International conference on Nano-science andTechnology, 14-16 October 2011, Singapore (Conference proceedings had beenpublishedbyASME,andsameincludesinASMEdigitallibrary.TheconferencewasIndexedbyEIcompendex,ThomsonISIproceedings).pp469-474.http://asmedl.org/ebooks/asme/asme_press/859841/859841_paper77
3. “CalculationofElastic properties ofPMMA/CNTusingmolecularDynamics Study”authored by Kamal Sharma,KuldeepKr. Saxena,Mukul Shukla in the reviewedInternational conference on Nano-science and Technology, 14-16October 2011,Singapore (Conference proceedings will be published by by ASME, and sameincludes inASMEdigital library.The conferencewas indexedbyEIcompendex,ThomsonISIproceedings).pp475-480.http://asmedl.org/ebooks/asme/asme_press/859841/859841_paper76
4. “Moleculardynamicsevaluationofmechanicalpropertiesofcarbonnanotubeswith
numberofStone-Walesdefects”authoredby KamalSharma,KuldeepKr.Saxena,MukulShukla inreviewed InternationalconferenceonNanoScience,Engineering
and Technology (ICONSET 2011), 28-30 November 2011, Chennai. Availableonlinesince12March2012onIEEEExplore.pp247-251.
5. Paper has been accepted for oral presentation “MolecularDynamics simulationofmechanicalbehaviorofcarbonnanotubeswithnumberofStone-Walesandvacancydefects” authored by Kamal Sharma, Kuldeep Kr. Saxena, Mukul Shukla inreviewed international conference on Frontiers of Nanoscience, Nanotechnologyand their applications (NanoSciTech-2012), 15-18 February 2012, Organized byPunjabUniversityChandigarh.
6. “ForcedFieldsbasedMolecularDynamicsStudyofDefectedSingle-WalledCarbonNanotubes” authored by Kamal Sharma, Kuldeep Kr. Saxena,Mukul Shukla inreviewed international conference on Material Processing and Characterization(ICMPC-2012), 08-10 March 2012, Organized by GRIET, Hyderabad. Selectedpapers presented at the conferencewill be considered forpublication in specialissuesof the following journal:ScientificResearchandEssays,UnitedStates,ISSN:19922248,Publisher:AcademicJournalsInc..,(Citedjournal).
7. “Comparative Molecular Dynamics Simulation Study of Mechanical Properties ofCarbonNanotubesWithNumberofStone-WalesandVacancyDefects”authoredbyKuldeep Kr. Saxena, Achchhe Lal in reviewed international conference onModeling, Optimization, and Computing (ICMOC-2012), 10-11 April 2012,Tamilnadu.
8. “EffectofMultipleStone-WalesandVacancyDefectsontheMechanicalBehaviorofCarbon Nanotubes Using Molecular Dynamics” authored by Kamal Sharma,Kuldeep Kr. Saxena, Mukul Shukla in reviewed international conference onModeling, Optimization, and Computing (ICMOC-2012), 10-11 April 2012,Tamilnadu.
ConferencePublications(National)
1. PaperpresentedintoaNationalconference(AFTMS-2011)atM.J.P.RohilkhandUniversity, Bareilly (U.P.), on the topic of “Calculation of FundamentalMechanical Properties of Single Walled Carbon Nanotubes using MolecularDynamicsSimulations”.
2. Paper presented in National conference at Haryana College of technology &management,Kaithal,Haryanaduring14-15May2010on the topicofPoisson’sratioofCarbonnanotubeindifferentdirections.
3. PaperpresentedinNationalconferenceatRohilkhandUniversity,Bareilywasheldon16-17April2010onthetopicofNovelMaterialsandTheirApplication.
4. PaperpresentedinthenationalconferenceatAbdulRahmanUniversity,Chennaiwhichwasheld on18-19March2010on the topic ofMechanicalPropertiesofPolyethylene/singlewallCarbon(SWCNT)NanotubeComposites.
AcademicExperienceJuly10–tilldateWorkingatG.L.A.University(DeemedtobeState),Mathura,U.P.India,
asAssistantProfessorintheDepartmentofMechanicalEngineering.References
Dr.DhirajKumarMahajan,AssistantProfessor,SchoolofMechanical,MaterialsandEnergyEngineering (SMMEE), RoomNo. 322, AcademicBlock, IIT Ropar, Ropar -140001,Punjab,IndiaTel:+91-1881-24-2244
Dr. Mukul Shukla, Associate Professor, Department of Mechanical Engineering,MNNITAllahabad,211004,UP,INDIA.Phone/FAX:+91-532–2271907(R),1529(O),9415307960,2545341,5677(FAX)
Dr.KamalSharma,AssociateProfessor,DepartmentofMechanicalEngineering,GLAUniversity,Mathura(UP)-281406,India,Tel-+915662250737(O),Fax-+915662241687,Cell-+919411065400.
