Curriculum for the Bachelor Degree in Refrigeration … Al-Balqa’ Applied University Curriculum...

�� G.SH

Al-Balqa’ Applied University

Curriculum for the Bachelor Degree in �� Refrigeration Systems and Air Conditioning Engineering��

� �

The curriculum for the B.S.c. degree in Refrigeration Systems and Air Conditioning Engineering (160 ) credit hours are distributed as follows:-

Credit Hours Requirements No.

21

6

University Requirements

• Compulsory

• Elective

1

27 Faculty Requirements 2

89

6

Specialization Requirements

• Compulsory

• Elective

3

11��Supportive Specialization Requirements 4

160 Total

�� Al-Balqa� Applied University

��

��

��

Curriculum for the Bachelor Degree in Refrigeration Systems and Air Conditioning Engineering

��

�� G.SH

First : University Requirement (27 Cr .H.) A: Compulsory Requirements (21 Cr.H.):

Prerequisite Weekly Hours Cr.H. Course Title Course No. Lab. Lecture -- -- 3 3 Arabic (1) 35003101

35003101 -- 3 3 Arabic (2) 35003102 -- -- 3 3 English (1) 35004101

35004101 -- 3 3 English (2) 35004102 -- 6 -- 3 Computer Skills (1) 35005101 �� -- 3 3 Military Sciences 35001101 -- 3 3 National Education 35002100

B: Elective University Requirements : (6 Cr.H.)

The student is allowed to select (6 Cr.H.) from the university elective courses offered by faculties other than the faculty of college.

Course No.�� Course Title Cr.H��

36001101�� Communication skills 3 36002102 Introduction to Psychology 3 36003103 Jordanian Society 3 36004104 Sport for All 3 36005105 Islamic Culture 3 36006106�� Administration and Economic Concepts�� 3��36007107�� Agriculture in Jordan�� 3��36008108�� Environment and Society�� 3��36012109 The Orthodox Caliphs History 3


��

��

��


��

�� G.SH

Second: Faculty Requirements: (27 Cr .H.)

Course No. Course Title Cr.H. Weekly Hours Prerequisite Lecture Lab. 30202101 Calculus 1 3 3 - - 30202102 Calculus 2 3 3 - 30202101 30201101 Physics 1 3 3 - - 30201111 Physics Lab. 1 1 - 3 30201101* 30201102 Physics 2 3 3 - 30201101 30201112 Physics Lab. 2 1 - 3 30201102* 30206101 General Chemistry 1 3 3 30129101 Engineering Workshops 1 - 3 - 30129203 Engineering Drawing 2 6 35005101 30206111 General Chemistry lab 1 - 3 30206101* 30129201 Static 3 3 - 30202102,

30201101 30801101 Computer Skills 2 3 2 3 35005101

Third: Specialization Requirements: (9� Cr. H.)

A- Compulsory Requirements (�� Cr. H.)

Prerequisite Weekly Hours

Cr. H. Course Title Course No. Lab. Lecture

30201101 -- 3 3 Fluid Mechanics 30130222 30130222 3 - 1 Fluid Mechanics Lab. 30130223 30146210 - 3 3 Strength of Materials 30129212

30129212* 3 - 1 Strength of Materials Lab. 30129313 30130336 - 3 3 Numerical Analysis 30130323 30202101 - 3 3 Instrumentation 30130324 30146210 - 3 3 Dynamics 30131324 30201101 - 3 3 Thermodynamics (1) 30130325

30130325* 3 - 1 Thermodynamics Lab.(1) 30130326 30130325 - 3 3 Thermodynamics (2) 30130327 30130222 - 3 3 Heat and Mass Transfer 30130328

30130222 - 3 3 Compressors and Hydraulic Machines 30130334

30130328* 3 - 1 Heat and Mass Transfer Lab. 30130421 30130327 - 3 3 Thermal Power Plants 30130422

30130324* 3 - 1 Instrumentation Lab. 30130423 30130325 - 3 3 Energy Conversion 30130433 30129231 6 - 2 Pipe and Duct Drafting 30130432 30130328 - 3 3 Solar Energy Engineering 30130435 30130328 - 3 3 Heat Exchanger Design 30130444 30130328 - 3 3 Principles of Refrigeration 30130451


��

��

��


��

�� G.SH

��

Prerequisite Weekly Hours

Cr. H. Course Title Course No. Lab. Lecture

30130451 - 3 3 Design of Refrigeration Systems 30130452

30130451* 3 - 1 Refrigeration Lab. 30130454 30130451 - 3 3 Air Conditioning Engineering 30130462 30130462 - 3 3 ACR Automatic Control 30130467 30130327 - 3 3 Fuel and Combustion 30130471 30130336 - 3 3 Automatic Control 30130542

30130451 - 3 3 Absorption Refrigeration Technology 30130556

30130462 - 3 3 Design of Air Conditioning Systems 30130562

30130462* 3 - 1 Air Conditioning Lab. 30130563 30130471 - 3 3 Design of Heating Systems 30130573 30129131 3 - 1 Duct Workshop 30130591 30130462 3 - 1 ACR Workshop 30130592

100 Cr.Hrs.** - - 6 Practical Training 30130494 120 Cr.Hrs. - - 3 Project1 30130595 30130595 - - 3 Project 2 30130596

* Synchronous ** Each (3) credit hours is equivalent to (140) training Hours.

��

B: Elective Specialization requirements: (6) Cr.H. to be selected from the following list:

Prerequisite Weekly Hrs Cr. H. Course Title Course No. Lab. Lecture

30130328 �� 3 3��Desalination Systems 30130541 30130471 �� 3 3 Boilers and Steam Generation 30130543 30130471 - 3 3 Internal Combustion Engines 30130544 30130334 �� 3 3 Plumbing Design 30130545

Department agreement

�� 3 3 Special Topics 30130551

30130451 - 3 3 Food Refrigeration 30130553

Fourth: Supportive Specialization Requirements: (11 Cr .H.)

Prerequisite Weekly Hours Cr. H. Course Title Course No. Lab. Lecture 30201102 - 3 3 Electric Circuit 30104213 30104213 - 3 3 Electronics 30104243

30104213* 3 - 1 Electric Circuit Lab. 30104214 30104243* 3 - 1 Electronics Lab. 30104344 30202102 - 3 3 Applied Math. 30130336


��

��

��


��

�� G.SH

��

First Year Second Semester First Semester

Cr. H. Course Title Course No. Cr. H. Course Title Course No. 3 Computer Skills 1 35005101 3 Arabic Language (1) 35003101 3 Arabic Language (2) 35003102 3 English Language (1) 35004101 3 English Language (2) 35004102 3 Physics (1) 30201101 3 Physics (2) 30201102 1 Physics Lab. (1) 30201111 1 Physics Lab. (2) 30201112 3 Chemistry (1) 30206101 3 Mathematics (2) 30202102 3 Mathematics(1) 30202101

16 Total 16 Total ��

Second Year Second Semester First Semester

Cr. H. Course Title Course No. Cr. H. Course Title Course No. 1��Engineering Workshops��30130101 3 Military Sciences 35001101 3 National Education 35002100 3 Computer Skills (2) 30801101 3 Electronics 30104243 2 Engineering Drawing 30130102 1 Electric Circuits Lab 30104214��3 Statics 30130201 3 Fluid Mechanics 30130222 3 Electric Circuits 30104213 3 Applied Mathematics 30130336 1 Chemistry Lab.(1) 30206111



��

��

��


��

�� G.SH

��

Third Year Second Semester First Semester

Cr. H. Course Title Course No. Cr. H. Course Title Course No. 3 University Elective 1 Fluid Mechanics Lab. 30130223 1 Electronics Lab 30104344 3 Strength of Materials 30129212 1 Strength of Materials lab 30129313 3 Numerical Analysis 30130323 3 Instrumentation 30130324 3 Thermodynamics (1) 30130325

1 Thermodynamics Lab(1) 30130326 3 Compressors & Hydraulic Machines 30130334

3 Thermodynamics (2) 30130327 3 Energy Conversion 30130433 3 Dynamics 30131324 �� 3 Heat and Mass Transfer 30130328 ��


Fourth Year Second Semester First Semester

Cr. H. Course Title Course No. Cr. H. Course Title Course No. 3 University Elective 3 Thermal Power Plants 30130422

3 Heat Exchanger Design 30130444 1 Heat and Mass Transfer Lab. 30130421

3 Design of Refrigeration Systems 30130452 1 Instrumentation Lab. 30130423

1 Refrigeration Lab. 30130454 2 Pipe and Duct Drafting 30130432

3 Air Conditioning Engineering 30130462 3 Solar Energy Engineering 30130435

3 Automatic Control 30130542 3 Principles of Refrigeration 30130451 3 Fuel and Combustion 30130471 16 Total 16 Total

��


��

��

��


��

�� G.SH

��

Fifth Year Second Semester First Semester

Cr. H. Course Title Course No. Cr. H. Course Title��Course No. 3 Specialization Elective 3 Specialization Elective

3 ACR Automatic Control 30130467 3 Design of Air Conditioning Systems 30130562

3 Absorption Refrigeration Technology 30130556 1 Air Conditioning Lab. 30130563

1 ACR Workshop 30130592 3 Design of Heating Systems 30130573

3 Project ( 2 ) 30130596 1 Duct Workshop 30130591 3��Project ( 1 ) 30130595 13 Total 14 Total

��

Cr. H. Course Title Course No. 6 Practical Training* 30131542

* After 120 Cr. Hrs.� � � � � � � �

� ��


��

��

��


��

�� G.SH

Course Description

35003101 Arabic Language 1 3(3-0) This course contains a set of linguistic skills in different levels such as the sounds of the Arabic language, its morphology, syntax, rhetoric, lexicography and writing. It includes as well as on applications on the use of Arabic dictionaries and applications on some writing skills indispensable for scholars in their working lives. It also contains a refined set of Quranic, poetry and short stories of Arabic texts to give the learners the opportunity to be in contact with and to appreciate these texts.

Pre-req. Arabic 99 or passing Arabic Level Exam 35003102 Arabic Language 2 3(3-0) This course aims to develop student's skills in writing and expression and to provide him with the necessary and basic ones in order to employ them in his daily use, and enable him to stand on the origins of various Arabic scripts, and access to various forms of technical and functional old and new writing.

Pre-req. 35003101 35004101 English 1 3(3-0) Is a complete graded course for foreign learners of English; it covers the skills of listening, speaking, reading, and writing; as well as improving pronunciation and building vocabulary; particular emphasis is placed on listening and speaking; the language of the course is British English.

Pre-req. English 99 or passing English Level Exam 35004102 English 2 3(3-0) Is a continuation of English I Course in terms of approach and methodology However, it covers a new range of interesting topics, and provides a more advanced grammar syllabus in a communicative context as well, therefore, this topic tends to be a continuation of ENGL 101 goals.

Pre-req. 35004101 35005101 Computer Skills 1 3(0-6) An introduction to computing and the broad field of information technology. Topics covered include the basic structure of digital computer systems; operating systems; application software; data communication and networks; and the Internet hands-on learning emphasizes windows (latest operating systems); MS-Office; and the Internet. 35001101 Military Science 3(3-0) This course aims at providing university students with general military culture and illustrating the overall military capabilities of the armed forces to defend the homeland and its role in development and service of the Jordanian society through lectures and field visits. 35002100 National Education 3(3-0) The course of National Education is one of the compulsory requirements of all students in Jordanian universities, national and private. The general intent is to provide students with the theoretical and practical knowledge of the homeland (Jordan), land and people, and to consolidate the love of the homeland and national brotherhood in them, to motivate them to serve the nation and the people consciously and sincerely, to be innovative and competitive by exhortations to achieve the desired progress in various fields of life. 30202101 Calculus 1 3(3-0) Review: functions, limits and continuity, the derivative integration, definite integral, indefinite integral, fundamental theorem of calculus, mean value theorem for integral area, volume of solid revolution, arc length, and surface area.


��

��

��


��

�� G.SH

Course Description

30202102 Calculus 2 3(3-0) Exponential, logarithmic, and inverse trigonometric functions hyperbolic functions, differentiations, integration, and limits of these function, principles of integral evaluation integration by parts, trigonometric substitution, partial fraction radical expression, infinite series, theorems in convergence and divergence, analytic geometry in calculus.(polar coordinate functions).

Pre-req. 30202101 30201101 Physics 1 3(3-0) Physics and measurements; vectors; motions in one dimension; motion in a plane; laws of motion; circular motion; Newton's laws and applications; work and energy; law of gravity; linear momentum and collisions; rotation of a rigid object about a fixed axis; rolling motion; angular momentum and torque. 30201102 Physics 2 3(3-0) Electric charge and Coulomb’s law; Electric fields and Gauss law; electric potential; potential energy, capacitors and dielectrics; DC and resistance; direct current circuits; magnetic fields; sources of magnetic field; Faraday’s law; inductance; alternating current circuits; electromagnetic waves.

Pre- req. 30201101 30201111 Physics Lab 1 1(0-3) Measurement and errors; vectors; rectilinear motion; projectile motion; Newton’s second law; friction; collisions; circular motion; rotational motion; simple harmonic motion.

Co-req. 30201101 30201112 Physics Lab 2 1(0-3) Electric field mapping; Ohm’s construction law; Wheatstone bridge; electric power; potentiometer; Kerchief's laws; charging and discharging circuits (R-C circuits); magnetic torque on a loop; Faraday’s laws of magnetic induction; resonance in R-L-C circuits.

Co-req. 30201102 30146210 Statics 3(3-0) Basic definitions and concepts Statics of particles; rigid bodies; equivalent systems of forces; centurions and centers of gravity; analysis of structures: frames, machines, and trusses; friction; moments of inertia; computer-aided statics.

Pre-req. 30202102, 30201101 30801101 Computer Skills 2 3 (2-3) Computer programming languages and their implementation; including; writing flow charts, the basic C++ programming variable definitions, templates, branches, loops, functions, arrays, strings, pointers, files, introduction to object-oriented programming, applications.

Pre req. 35005101 30206101 Chemistry 1� 3 (3-0) Periodic table; atomic stricture and chemical bonds; electron configuration; chemical stoichiometry; Redo-system; chemical equilibrium; thermodynamic; chemical kinetics; electro-chemistry 30206111 Chemistry Lab 1� 1 (0-3) Basic concepts, atomic theory and periodic table. Chemical bonding and molecular structure. Chemical reactions in solutions, oxidation-reduction reactions, ideal gases, states of matter and intermolecular forces. Physical properties of solutions and colloids. Chemical equilibrium, solubility, molecular structure, types of chemical reactions. Thermodynamics principles and kinetics. Organic chemistry.

Co-req. 30206101


��

��

��


��

�� G.SH

Course Description

30129131 Engineering Workshops 1(0-3) Mechanical works including: hand filing, turning, welding, metal cutting, casting and molding, electrical circuits; elements of electrical circuits; open and closed circuits; AC/DC circuits; instruments and measurements. Carpentry works including: types of timber, timber works, equipment and tools. 30129231 Engineering Drawing 2(0-6) Use of instruments; lettering; graphic geometry; orthographic; isometric drawing and sketching; environmental applications; Introduction to AutoCAD, application of AutoCAD, commands, geometric entities. Geometric construction. Dimensioning, free –hand sketching, object representation, orthographic drawing and projections.

Pre-req. 35005101 30130222 Fluid Mechanics 3(3-0) Fundamentals of fluid mechanics; hydrostatic and continuity principles; energy and momentum principles; forces on emerged bodies; laminar and turbulent flows in closed conduits; applications of fluid mechanics involving pressurized flow; open channels and pumps.

Pre. Request: 30201101 30130223 Fluid Mechanics Lab. 1(0-3) Measuring of physical properties of fluids, force on immersed plate, Jet force on plate, Bernoulli’s equation, Reynolds experiments, flow through orifices, and nozzle venture friction factor.

Pre. Request: 30130222 30129212 Strength of Materials 3(3-0) Principles of statics, including equilibrium and static equivalents. Determination of moments and force resultants in slender members. Introduction to mechanics of deformable bodies, concepts of stress and strain, classification of materials behavior, stress-strain relations and generalized Hooke’s Law. Application of engineering problems involving members under axial load, torsion of circular rods and tubes, bending and shear stresses in beams, combined stresses in beams, deflection of beams, buckling of columns.

Pre. Request: 30146210 30129313 Strength of Materials lab �(�-�) Applying theory gained within the strength of materials theoretical through practical experimentation. Tensile; compression; bending; torsion; buckling of columns; impact; hardness, springs under axial loading; rubber shearing.

Pre. Request: 30129212 30130323 Numerical Analysis 3(3-0) Calculate measuring errors and their reasons; solve non-linear equations in one variable. Sequences, series and power series, Students will learn approximation of functions by interpolation, numerical differentiation and integration, direct methods for solving non-linear equations and some numerical solutions of ordinary differential equations.

Pre. Request: 30130336 30130324 Instrumentation 3(3-0) Measurement system, error in measurement, signal conditioning stage, measurements of length, angle, strain, force, torque, humidity, temperature and pressure.

Pre. Request: 30202101


��

��

��


��

�� G.SH

Course Description 30130325 Thermodynamics (1) 3(3-0) Thermodynamics concepts and definitions, states, properties, systems, control volume, processes, cycles, units, tables of properties, work and heat, first law, internal energy and enthalpy, conservation of mass, steady–state and uniform state processes, second law, heat engines and refrigerators, reversible processes, Carnot cycle, entropy, Claudius inequality, principle of the increase of entropy, efficiencies.

Pre. Request: 30201101 30130326 Thermodynamics Lab(1) �(�-�) Pressure-temperature relation for saturated mixtures; closed and open systems properties; compressor work analysis process and cycle analysis; heat pump performance; thermodynamics properties; heating value measurement; humidity and moisture measurement.

Pre. Request: 30130325 30130327 Thermodynamics (2) 3(3-0)

Power and refrigeration cycles, property relations, mixtures and solutions, chemical reactions, phase and chemical equilibrium, flow through nozzles and blade passages.

Pre.Request:30130325 30130328 Heat and Mass Transfer 3(3-0) Introduction of basic heat and mass transfer phenomena, heat transfer modes, heat conduction, heat convection, heat radiation. Heat transfer. During boiling and condensation, heat exchangers. Diffusion mass.

Pre. Request: 30130222 30130334 Compressors & Hydraulic Machines 3(3-0) Introduction to refrigerant compressors, compressors types, efficiency analysis of volumetric compressors, analysis of centrifugal compressors and applications, introduction to fans, applications of fans, types and application of pumps, types and classification of turbines.

Pre. Request: 30130222 30130421 Heat and Mass Transfer Lab.� �(0-3) Conduction, radial and axial along different shapes and bars, radiation, Stefan-Boltzmann law, Kirchhoff law, Lambert cosine law, convective, heat exchangers, radiations heat transfer, boiling heat transfer.

Pre. Request: 30130328 30130422 Thermal Power Plants 3(3-0) Vapor-cycles, gas turbine-cycles, and combined-cycles. Steam and gas turbine power plants; components, selection and economics.

Pre. Request: 30130327 30130423 Instrumentation Lab. 1(0-3) System response and performance. Linear and angular measurement, stress, strain, torque, and temperature measurements, operational amplifiers, data acquisition.

Pre. Request: 30130324 30130432 Pipe and Duct Drafting 2(0-6) Projects include isometric, elevation, plan and detail drawing of piping systems. Duct layout and views. A computer aided drafting (CAD) and a project is included.

Pre. Request: 30129231 30130433 Energy Conversion 3(3-0) Energy resources and their uses, different types of energy conversion technology, fuel cells, thermoelectric, solar energy conversion, and energy bench technology and cogeneration. Current status and future challenges of energy generation and conservation, air pollution, green house effect, No. emission.



��

��

��


��

�� G.SH

Course Description

30130435 Solar energy Engineering 3(3-0) Solar angles, solar radiation, different collector types, solar systems, large PV system, photo-voltaic under concentrated sunlight, hydrogen economy.


30130444 Heat Exchanger Design 3(3-0) Heat exchanger types and construction, fabrication, performance estimate, flow distribution problems, stress analyses, general design consideration and approaches, liquid-to-liquid, gas-to-gas, liquid-to-gas heat exchangers, heat exchanger test.

Pre. Request: 30130328 30130451 Principles of Refrigeration 3(3-0) Refrigeration introduction and fundamentals, Basic refrigeration cycles & application, Compression cycle theory, performance of compressors compression system, compressor, condenser, refrigerants, secondary refrigerants, evaporators, expansion devices, refrigeration oils.

Pre. Request: 30130328 30130452 Design of Refrigeration Systems 3(3-0) Fundamentals of refrigerating system application, cooling/freezing storage load estimation, building insulation planning, characteristics charts of refrigeration systems, condenser design, evaporator design, energy efficient planning, multi compressors refrigeration system.

Pre. Request: 30130451 30130454 Refrigeration Lab. 1(0-3) Basic cycle performance, suction accumulator. Liquid receiver, different types of expansion device, oil separator, multi evaporators.

Pre. Request: 30130451 30130556 Absorption Refrigeration Technology 3(3-0) Absorption cycle fundamentals, properties of working fluids, volume, energy, entropy and phase equilibrium of mixture, diagrams of pressure, temperature, enthalpy and mass fraction, mixing of fluid, heat of mixing, desorption, absorption, condensation, evaporation, rectification, single-effect, double-effect and advanced water/lithium bromide cycles, single-stage, two-stage and GAX ammonia/water systems, Diffusion absorption cycle (Electrolux).

Pre. Request: 30130451 30130467 ACR Automatic Control 3(3-0) Concepts of control system, control loops, block diagram, measurements and control of temperature, pressure, flow rate, level and humidity, pneumatic control, fluidic control, electric and electronic control, control actions, overloads, relays and defrost timers.

Pre. Request: 30130462 30130462 Air Conditioning Engineering 3(3-0) Properties of air by: Psychometric chart and equations, air conditioning processes, air conditioning load analysis and estimate, air conditioning cycles analysis, air conditioning systems, air conditioning apparatus.

Pre. Request: 30130451 30130471 Fuel and Combustion 3(3-0) Fuel types, chemical reactions, heat of reaction, heat of formation, introduction to combustion, flame types, flame temperature, theory of diffusion flames, and mechanism of fuel, introduction to air pollution sources.



��

��

��


��

�� G.SH

Course Description

30130542 Automatic Control 3(3-0) Concepts of control systems and mathematical background, transfer function, block diagram and signal flow graph, mathematical modeling of control systems and elements, time-domain analysis, root locus techniques and frequency-domain of control systems, measuring the character of control systems, design of control systems using the computer.

Pre. Request: 30130336 30130562 Design of Air Conditioning Systems 3(3-0) Fundamentals of HVAC system design, cooling/heating load estimation, analysis of applied psychometrics charts, schematic design of HVAC system, equipment selection, main equipment specification, air duct & water piping system design, equipment layout & installation, materials & cost analysis. HVAC’s energy saving.

Pre. Request: 30130462 30130563 Air Conditioning Lab. 1(0-3) Heating, cooling, humidification, dehumidification processes, Humidistat, controlling devices in air conditioning system, pressure controllers and temperature controllers, velocity measurements and control

Pre. Request: 30130462 30130573 Design of Heating Systems 3(3-0) Domestic and commercial load calculation, central heating plants with emphasis on installation procedure, selection and application of heating equipment, furnaces, boilers, pumps, fans, Hot-water, underfloor, vapor and hot-air heating systems.

Pre. Request: 30130471 30130591 Duct Workshop 1(0-3) Layout and fabrication of sheet metal and fiberglass duct work used in air conditioning and heating systems. Components used proper use of hand tools and machines.

Pre. Request: 30129131 30130592 ACR Workshop 2(0-6) Practice in heating equipment, use and care of hand and power tools, piping fabrication of copper, steel, cast iron, and plastic pipe, oil burner, boiler installation and service, refrigeration equipment demonstration and practice, the use of hand tools, soldering and brazing and electrical test, trouble shooting and corrective action requirement.

Pre. Request: 30130462 30131324 Dynamics 3(3-0) Kinematics and kinetics of particles and systems of particles with applications to force motion, impact and relative motion, single-degree of freedom, free and forced vibration, dynamics of rigid bodies, relative motion, and gyroscopic motion;, computer applications.

Pre. Request: 30130201 30130541 Desalination Systems 3(3-0) Properties of water and aqueous solutions, method of desalination, multi-effect distillation, multi-stage flash distillation, vapor compression distillation, ion exchange, reverse osmosis, problems common to distillation.



��

��

��


��

�� G.SH

Course Description

30130543 Boilers and Steam Generation 3(3-0) Introduction to Basics : steam generation, boiling , vaporization, steam separation , steam thermodynamics properties, fluid mechanics and heat transfer, steam generation by different energy sources, boilers types, superheater, economizers and air heaters, draft system, fans, boilers classification, power controlling, electrical furnaces, operation and maintenance of steam generators.

Pre. Request: 30130471 30130544 Internal Combustion Engine 3(3-0) Basic Engine systems, Engine components identification Theoretical and actual cycles; engine types; combustion in internal combustion engine; Two – and four-stroke engine operation, engine Measurements and Performance Calculations, Superchargers and Turbochargers; supercharging; lubrication and wear.

Pre. Request: 30130471 30130545 Plumbing Design 3(3-0) Sizing and design of hot and cold water lines, drainage and vent lines for residential and commercial sanitary systems, study of basic hydraulic and fluid flow with emphasis on application of various types of water pumping devices.

Pre. Request: 30130334 30130551 Special Topics 3(3-0)

Topics of current interest and not covered in courses currently offered by the specialization. Pre. Request: department agreement

30130553 Food Refrigeration 3(3-0) Principles of food refrigeration, methods of cold storage of food, advantage and disadvantage of these methods. Heat load determination, plant sizing and also on motoring of heat loads to ensure they are minimized, chilling time and freezing time of food, operation efficiency of refrigeration system, water vapor and its effect on refrigeration system performance, control of relative humidity and surface condensation, CFCs and their impact on the industrial technology of food refrigeration.

Pre. Request: 30130451 30104213 Electrical Circuits1 3(3-0) Introduction. Current, Voltage, Resistance, Ohm’s low, Power and energy, Series, parallel and Series-Parallel resistive circuits, Current and Voltage Sources, Superposition, Thevenin’s, Norton’s theorems, Kerchov mesh current and node voltage methods. Capacitance and inductance, R-C and R-L-C circuits, frequency response, Complex numbers in reactive circuits, resonance and filters. Single-phase & three-phase circuits connections and analysis; two-port networks; troubleshooting in DC and AC circuits.

Pre. Request:�30201102 30104243 Electronics 1 3(3-0) Properties of semiconductor materials; doping technique; p-n� junction; diode: forward and reverse biasing; VI static characteristics; small and large-signal models; junction capacitance and switching times; types and applications; bipolar junction transistors: construction; connections and biasing; applications; small signal models; ratings; and applications; field-effect transistors: construction types; VI characteristics; ratings; and applications.



��

��

��


��

�� G.SH

Course Description

30104214 Electrical Circuits 1 Lab �(�-�) DC circuits: Ohm’s law; KVL and KCL; network theorems; transient analysis of RL; RC; and RLC circuits; impedance concept and techniques; power and P.F; series and parallel resonance; three phase circuits; parameters of two-port networks; magnetically coupled circuits; filters; troubleshooting.

Pre. Request: 30104213 30104344 Electronics Lab 1 1(0-3) Diode characteristics; rectification; regulation; clipping and clamping; BJT characteristic and applications; FET characteristics and applications; frequency response of amplifiers; DC regulated power supplies; troubleshooting projects.

Pre. Request: 30104243 30130336 Applied Mathematics 3(3-0) Ordinary differential equations, first order equation, second order equation, method of solutions, Fourier series, Laplace transformation, Bessel Functions, partial differential equations.

Pre. Request: 30202102 30130494 Practical Training 6(0-0) Every student must complete practical training as regulations specify in one of the following locations: engineering office, factory, or engineering projects company in Refrigeration systems and Air Conditioning Engineering topics. After finishing at least 100 hours of Academic study in the Refrigeration systems and Air Conditioning Engineering department. Note: • The practical training is equivalent to an academic load of 6 hours. • Each 3 credit hours is equivalent to 140 practical field hours.

Pre. Request: 100 Cr. H 30130595 Project 1 3(0-0) The student should arrange with one or more department academic members to select a particular project. He analyses this project and suggests methods to carry out the project in the next stage.

Pre. Request: 120 Cr. H. 30130596 Project 2 3(0-0) Based on the results obtained from the first stage, the student carries out the project suggested by the department.


� ��

Curriculum for the Bachelor Degree in Refrigeration … Al-Balqa’ Applied University Curriculum...

Documents

Transcript of Curriculum for the Bachelor Degree in Refrigeration … Al-Balqa’ Applied University Curriculum...