Current impulse sensor Type 2105A
3
©2014 ... 2019, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, Fax +41 52 224 14 14, [email protected], www.kistler.com Kistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 1/3 Current impulse sensor 2105A_000-953e-07.19 Accessories with amplifier and current supply module The current impulse sensor with amplifier and supply module was developed for the measurement of trigger signals for injection timing and ignition timing on gasoline and diesel engines. The system comprises an electrical power supply module Type 2105A10, the amplifier module Type 2105A20 and the current impulse sensor Type 2105A30. Due to its compact construction and the ability to cascade up to 8 measuring channels, the innovative current impulse sensor is suitable for application in a test cell or in the vehicle along with a KiBox To Go combustion analyser system. • Cascadable up to 8 channels • Compact construction • Suitable for applications in the vehicle and on the test bench • Voltage supply 9 ... 36 VDC Total construction consisting of: j 2 x current impulse sensors Type 2105A30 k 2 x amplifier modules Type 2105A20 l 1 x electrical power supply module Type 2105A10 1 x electrical power supply cable Type 2105A40 j k l Type 2105A... The current impulse sensor Type 2105A30 has the following properties: • Compact dimensions • Tool-free assembly • Shock resistant up to 2 000 g • Overload-resistant up to 50 A Description The current impulse sensor is based on the Hall effect measure- ment principle, thus enabling the indirect measurement of cur- rent in a conductor. The advantages: The measurement signal is galvanically isolated from the conductor. In addition, the conductor does not need to be disconnected. The current in the conductor being measured creates a magnetic field or a magnetic field change. The Hall sensor with ring core records the magnetic field and the magnetic field changes and supplies an output voltage proportional to the current. Application Areas of application include, the detection of injection and ignition timing as well as the actuation times of actuators in the vehicle and on the test bench. Its small dimensions and exceptionally low weight are ideal for assembly in systems with space limitations. One of the conductors (supply or return conductor), whose line diameter can be up to 5 mm, is guided vertically through the sensor. Thanks to its sliding spring lock, guiding the conductor into the sensor is simple and fast. No tools are required to mount the sensor. Miniaturized current impulse sensor Type 2105A30
Transcript of Current impulse sensor Type 2105A
©2014 ... 2019, Kistler Group, Eulachstrasse 22, 8408 Winterthur, SwitzerlandTel. +41 52 224 11 11, Fax +41 52 224 14 14, [email protected], www.kistler.comKistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com
This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded.
Page 1/3
Current impulse sensor
2105
A_0
00-9
53e-
07.1
9Accessories
with amplifier and current supply module
The current impulse sensor with amplifier and supply module was developed for the measurement of trigger signals for injection timing and ignition timing on gasoline and diesel engines.The system comprises an electrical power supply module Type 2105A10, the amplifier module Type 2105A20 and the current impulse sensor Type 2105A30.Due to its compact construction and the ability to cascade up to 8 measuring channels, the innovative current impulse sensor is suitable for application in a test cell or in the vehicle along with a KiBox To Go combustion analyser system.
• Cascadable up to 8 channels• Compact construction• Suitable for applications in the vehicle and on the test bench• Voltage supply 9 ... 36 VDC
Total construction consisting of:j2 x current impulse sensors Type 2105A30k2 x amplifier modules Type 2105A20l1 x electrical power supply module Type 2105A101 x electrical power supply cable Type 2105A40
j
k
l
Type 2105A...
The current impulse sensor Type 2105A30 has the following properties:
• Compact dimensions• Tool-free assembly• Shock resistant up to 2 000 g• Overload-resistant up to 50 A
DescriptionThe current impulse sensor is based on the Hall effect measure-ment principle, thus enabling the indirect measurement of cur-rent in a conductor. The advantages: The measurement signal is galvanically isolated from the conductor. In addition, the conductor does not need to be disconnected. The current in the conductor being measured creates a magnetic field or a magnetic field change. The Hall sensor with ring core records the magnetic field and the magnetic field changes and supplies an output voltage proportional to the current.
ApplicationAreas of application include, the detection of injection and ignition timing as well as the actuation times of actuators in the vehicle and on the test bench. Its small dimensions and exceptionally low weight are ideal for assembly in systems with space limitations. One of the conductors (supply or return conductor), whose line diameter can be up to 5 mm, is guided vertically through the sensor. Thanks to its sliding spring lock, guiding the conductor into the sensor is simple and fast. No tools are required to mount the sensor.
Miniaturized current impulse sensor Type 2105A30
©2014 ... 2019, Kistler Group, Eulachstrasse 22, 8408 Winterthur, SwitzerlandTel. +41 52 224 11 11, Fax +41 52 224 14 14, [email protected], www.kistler.comKistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com
This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded.
Page 2/3
2105
A_0
00-9
53e-
07.1
9Current impulse sensor with amplifier and current supply module, Type 2105A...
Amplifier module Type 2105A20Technical data Type 2105A30
Measuring range A ±30
Overload A 50
Reaction time ms 3
Linearity error, typ./max. % 0.3/1
Shock resistance (pulse width >2 ms) g 2 000
External current sensitivity (max.) mV/A/10 V 1
Operating temperature range °C –25 ... 80
Housing material AL alloyblack anodized
Dimensions without latch mm 24.5x18x8.5
Suitable for cable diameter up to mm 5
Cable length m 2
Weight g 10
Degree of protection IP 54
All values measured at 25 °C.
Frequency response of electrical impulse sensor Type 2105A30
englisch
Technical data Type 2105A20
Output signal
Output signal depending on sensor
sensitivity
10 mV/A/ 100 mV/A
VDC ±10
Connections
Voltage supply – 6 pin
Spring-contact
Input signal/sensor1) Type Binder
M8/4
Series 768
Output signal Type BNC. neg.
Signal delay time (typ./max.) µs 1/1.5
Dimensions (LxWxH) mm 65x55x23
Weight g 85
Degree of protection IP 40
Housing material2) Plastic
Operating temperature range °C –25 ... 80
1) For connecting sensors of Type 2105A302) The plastic housing is oil-resistant and gasoline-resistant
©2014 ... 2019, Kistler Group, Eulachstrasse 22, 8408 Winterthur, SwitzerlandTel. +41 52 224 11 11, Fax +41 52 224 14 14, [email protected], www.kistler.comKistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com
This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded.
Page 3/3
2105
A_0
00-9
53e-
07.1
9Current impulse sensor with amplifier and current supply module, Type 2105A...
Ordering key Type 2105A
Single components
Electrical power supply module 10
Amplifier module 20
Current impulse sensor 30
Electrical power supply cable for
connection to Type 2105A10
connector plug: Binder M8/Series
768/3 pin/Banana 4 mm,
length = 1.5 m
40
Single components Type• Electrical power supply module 2105A10• Amplifier module 2105A20• Current impulse sensor 2105A30• Electrical power supply cable for connection to 2105A40
Type 2105A10 Connector plug: Binder M8/Series 768/3 pin/ Banana 4 mm, length 1.5 m
Service Typ• Calibration with adjustment incl. 9961C-SC-01-1-2-1
calibration certificate for amplifier module Type 2105A20 and current impulse sensor Type 2105A30
Electrical power supply module Type 2105A10
Technical data Type 2105A10
Input
Voltage supply (for 8 modules) VDC 9 ... 36Overvoltage protection/switch-off
threshold
VDC 37 ... 39
Max. current conrumption at 24 V
supply voltage (typ.)
mA 410
Pre-fuse (max.) A 3Measurement signals – galv. isolated
Output voltage (electrical power supply for max. 8 amplifier
modules Type 2105A20)
Output voltage VDC ±15
Output current mA ±265
Power output (max.) W 8
Output (summation signal)
Output voltage signal
(averaging across all amplifier modules)
VDC ±10
Short-circuit current (typ.) mA 32
Short-circuit through automatic switchoff –
Connections
Summation signal output Type BNC neg.
Supply voltage1) Type Binder M8 3
Series 768
Dimensions (LxWxH) mm 65x55x23
Weight g 85
Degree of protection IP 40
Housing material2) Plastic
Temperature range °C –25 ... 80
1) Optional accessories electrical power supply cable Type 2105A402) The plastic housing is oil-resistant and gasoline-resistant
