Cubis MPS The Perfectly Balanced System for Manual Pipette … · 2018. 11. 2. · MPS6.6S Micro...
Transcript of Cubis MPS The Perfectly Balanced System for Manual Pipette … · 2018. 11. 2. · MPS6.6S Micro...
-
Cubis®
MPS – The Perfectly Balanced System for Manual
Pipette Calibration
-
Pipette Calibration Made Easy
For professional pipette calibration, you need the right balance –
one that combines accuracy, precision, speed and convenience.
Accuracy and precision to comply with international regulations. Speed to meet requirements for cost- and time-efficient performance. And convenience for working in a comfortable posture.
Does all this sound impossible? Not if you find the right balance.
Meet the Sartorius Cubis®
MPS: The perfectly balanced
system designed to reconcile all your needs for accuracy,
precision, speed and convenience in pipette calibration.
-
Precision and Accuracy meets Compliance
The Cubis®
Manual Pipette Calibration
System- (MPS) integrates Cubis®
premium lab balances developed for high-precision gravimetric testing in highly regulated sectors. The embedded sensor constantly monitors the humidity inside the vapour trap. The dedicated climate control tower constantly monitors the temperature, -humidity and barometric pressure in the surrounding lab enviroment.
Any -nonconformance with the predefined
-climate requirements will instantly trigger a
red alert. Cubis®
MPS ensures professional
pipette calibration – accurate, precise and compliant with international standards.
-
Consistency meets Speed
Cubis®
MPS speeds up your pipette
calibration workflow. How? By keeping the humidity inside the weighing chamber constant. In between pipetting steps, the motion-controlled draft shield sliding door on the evaporation trap lid opens and closes automatically. The humidity level is safely maintained within the weighing chamber. As a result, you can perform the next measurement instantly, saving you 30% of valuable time.
In addition, data measured by the climate
control tower are digitally transferred
directly to your calibration software,
further enhancing the efficiency of your
workflow. Cubis®
MPS will accelerate
your pipette calibration by up to 60%.
Plus, it ensures consistency in high-
throughput calibration processes.
Efficiency meets Ergonomics
Cubis®
MPS extends your freedom of
movement to a new level. The innovative
technology of the built-in motion control
sensor surveils the area around the weigh-
ing chamber at a 180-degree angle. So it detects a pipette at all times – no matter if it approaches from the left, right or the front. The sensor will instantly activate the automated trap lid for convenient dispensing. What’s more, the new and
ergonomic design of Cubis
® MPS enables
you to adjust your working position to your
liking. Cubis®
MPS increases efficiency by
maximizing ergonomic features for manual
pipette calibration.
-
Motion Control
Sensor Fully automated draft shield operation
– 180° detection radius: spots pipettes
approaching and withdrawn from the
front, left or right – Quick opening and closing of the trap
lid: convenient and efficient pipetting – Ergonomic design: freedom to
choose working position and
freedom of movement – Prevention of evaporation: high-
throughput calibration for 30%
time savings
180°
-
Cubis®
MPS
Cubis®
MPS offers you a perfectly balanced system of dedicated modules.
Display and Control Module
Outstanding operating convenience
The limits can be adapted to
the regulatory environments.
The current climate data is
accessible during the workflow.
The limits can be configured
for individual accessory.
The remaining available volume
is continously displayed.
-
Dedicated Weighing Modules
High-precision gravimetric testing
– Evaporation trap: stable humidity
conditions inside the weighing chamber
– Automated draft shield door: prevents evaporation for error-free measurements
– Integrated humidity sensor: controls
humidity inside the weighing chamber
– White LED light: illumination of the full weighing area
– Red LED light: instant alert if climate
parameters are out of tolerance
-
Accessory Modules
Make the Most Out of Your Cubis®
MPS
Climate Control Tower
Fast calibration in compliance with regulations
– Monitors environmental climate
conditions: calibration lab temperature,
humidity and barometric pressure
– Compares actual climate conditions with predefined limits
– Triggers red alert, if environmental
conditions are out of tolerance;
ensures compliance with regulations
– Direct digital data transfer of climate data to calibration software:
additional time savings of up to 30%
-
Liquid Reservoir Easy and secure handling of calibration medium
– Internal temperature control: ensures
error-free calibration measurements – Triggers red alert, if temperature
is out of tolerance; ensures
compliance with regulations
Suction Pump Fast and effective aspiration of pipetted liquids
– Powerful – Robust
-
Technical Specifications
Cubis®
MPS is available in a choice of two pipette calibration balance
modules for calibration of single-channel pipettes with a nominal volume of: – Pipettes from 1 µL up to 10 µL
(weighing capacity: 6.1 g; readability: 0.001 mg) – Pipettes from 10 µL up to 100 µL
(weighing capacity: 100 g; readability: 0.01 mg).
Cubis®
MPS6.6S Micro
Readability [mg] 0.001
Weighing capacity [g] 6.1
Typical response time [s] 5
Repeatability [
-
Cubis®
MPS105S Semimicro Readability [mg] 0.01
Weighing capacity [g] 100
Typical response time [s] 3
Repeatability [
-
Sales and Service Contacts For further contacts, visit www.sartorius.hr
Croatia Sartorius Croatia - Libra Elektronik d.o.o. ZAPREŠIĆ Savska 45a 10290 Zaprešić Phone +385 1 3340 290 Fax +385 1 3340 299 www.sartorius.hr [email protected] Bosnia and Herzegovina Sartorius Libra Elektronik d.o.o. Olimpijska 30 71000 Sarajevo Phone +387 33 769 130 Fax +387 33 769 131 www.sartorius.ba [email protected]
www.sartorius.com
http://www.sartorius.hr/