CT610 STANDARD SPECIFICATIONS

CT610 CHASSISHeat-treated steel, yield strength: 120 000 psi, 760MPa

Frame rail dimensions: 260 x 92 x 9.5mm, section modulus 291cm3

Heavy Duty Intermediate cross member

Huck bolted to minimise maintenance

Aluminium deck plate behind cab

Tapered end of frame with fifth-wheel mounting angles (for prime movers only)

Double front tow hooks

Stainless steel bright finish bumper

Front Underrun Protection Device

FRONT AXLEMeritor MFS 14-143A wide track RHD

Type: Forged steel I-beam

Capacity: 6,500kg

Steel Hubs Option: Alloy Hubs

FRONT SUSPENSION3-leaf parabolic springs, 1480mm long

Tuned shock absorbers

Capacity: 6,500kg

BRAKESDual Circuit Air System, S-Cam brakes

Size: front 419mm x 127mm with T24 chamber

Size: rear 419mm x 178mm with type 30/30 chambers

Park brake: both rear axles, spring-actuated

Haldex auto slack adjusters

Air Compressor, Bendix 15.9cfm capacity

Air dryer, Bendix AD-IS

Three manual drain valves with pull chains

Dust shield on all axles

Self-return trailer brake hand control on steering column

Semi-trailer air connections at back of cab

Option: Hose tender slide bar, upper rear of cab

Bendix 4-channel ABS with full vehicle wheel control system with automatic traction control

STEERINGSheppard M100 power steering gear

Gear-driven power steering pump

Adjustable tilt telescopic steering column with leather-wrapped 2-spoke steering wheel, 457mm diameter

EXHAUSTSingle DPF muffler, active regeneration, LHS frame mounted with shroud and vertical tail pipe

ELECTRICAL SYSTEMLED headlights, with auto on windscreen wiper function and daytime running lights

12-Volt, negative to earth

Cat Batteries: 3 x 12V, RHS chassis mounted

Alternator: 12V, 160 amp, brush type, pad-mounted

Starter, 105P with Soft Start

Two trailer sockets, 7-pin trailer lighting and an EEC socket

for trailer ABS, at rear of cab

Exterior light test system for pre-trip inspection

Circuit breaker with manual reset

Park brake warning horn if brake not applied and door opened

Back up alarm, 102 dba

Diamond Logic- Multiplexing system

Option: Work light connection on chassis

Option: P.T.O. prep kit (switch and wiring loom)

ENGINECat CT13 cooled EGR, ADR 80/03 emissions compliant

6-cylinder, in-line, dual sequential turbocharged and aftercooled, high pressure common rail fuel injection system

Cruise control with steering wheel controls

Rated at 475 hp @1700 rpm and 1700 lb.ft torque @1000 rpm.2100 governed rpm.

Jacobs engine brake with 3-stage control

Excellent engine access

High-capacity under hood air cleaner with restriction indicatorgauge in cab

100 kph road-speed limited

Optimized for ADR 80/03 emissions controls

COOLING SYSTEMAluminum Radiator

Front to Back System, Single Row, Down Flow

Main Radiator: 1429sq in.

Charge Ar Cooler: 764.1sq in.

Low Tempurature Radiator: 1123.3sq in.

Horton DriveMaster air operated two-speed, Nylon fan

CLUTCHEaton Fuller Solo Advantage two-plate ceramic with Self Adjust feature

Diameter: 394mm

Light pedal, integrated air-assist clutch release system

TRANSMISSIONEaton Fuller RTLO-18918B 18 speed overdrive

Lube pump & oil-to-air transmission cooler

Option: Eaton UltraShift Plus Transmission with Hill Start Assist

WHEELS AND TYRES Wheels – Ten: bright finish alloy, 10-stud 285mm PCD, 8.25DC x 22.5

Tyres: 295/80R22.5 on front axle; 11R22.5 on rear axles

GVM - 24.5 tonne GCM (Truck & Trailer applications) - up to 58 tonneGCM (Prime mover applications) - up to 63.5 tonne

BBC CF

BA

WB

OAL

AFCA

BBC CF

BA

WB

OAL

AFCA

Chassis Weights (kg) Dimensions (mm) Turning Radius (m) CT610Suspension Front Rear Total

CT610 Day Cab HAS460 4100 3415 7515

CT610 Day Cab HAS460 4050 3375 7425

CT610 Extended Cab HAS460 4220 3485 7705

WB BA CA CF AF OAL BBC

5150 1290 3555 5155 1600 8040 2885

4250 1290 2655 4255 1600 7140 2885

5150 1290 2895 4495 1600 8040 3545

Curb/Curb Wall/Wall

19.1 20.1

16.6 17.6

19.1 20.1

CT610 Day Cab

CT610 Extended Cab

www.cattrucks.com.au®2014 Caterpillar All Rights Reserved Printed in Australia CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

POS2014_R1

All efforts have been made to ensure the information contained in this document was correct at time of printing or uploading. Images displayed are for illustration purposes only. Tare weights are provisional fi gures and have been calculated to provide the best accuracy possible, and may be subject to variation. NC2 Global Australia Pty Ltd reserves the right to alter any details of the specifi cations and equipment without notice. NC2 Global Australia Pty Ltd in so far as it is permitted by law to do so, shall not be liable in any way as a result of any reliance placed by any person on anything contained in this brochure. You should therefore check with your authorised Cat Trucks dealer at the time of ordering your truck to ensure that colour, specifi cations, equipment, design features and options are available for the vehicle you are ordering. Please note that some options may only be available in combination with others. Authorised Cat Truck dealers will on request from NC2 Global Australia Pty Ltd provide up to date information on all accessories, design features, prices and availability.

INSTRUMENTATIONElectronic speedometer and tachometer

Gauges: engine oil pressure, voltmeter, engine oil temperature, air pressure, coolant temperature, fuel level, transmission temperature, rear axle temperatures, fuel trip data

Warning system: low air pressure, low fuel, low oil pressure, high engine coolant temp and low battery voltage (visual and audible)

REAR AXLEArvin Meritor RT-46-160

Capacity: 20,900kg (46,000lb)

Ratios: 3.91:1 Optional Ratios: 4.10:1 or 4.30:1

Inter-differential power divider lock

Differential cross-lock on rear/rear axleOption: Additional cross-lock on forward rear axle

Option: Lube Pump with bypass

Electronic auto traction control standard

Steel HubsOption: Alloy Hubs

REAR SUSPENSIONHASHendrickson HAS 460-55 (1850 lb.ft) suspension engineered

to meet Australian Specifi cation with road friendly compliance

1397mm axle spacing

Suspension dump valve with control switch in instrument panel

Capacity 20,900kg (46,000lb)

PRIMAAX EXHendrickson PAX 460 (1850 lb.ft) suspension engineered to meet Australian Specifi cation with road friendly compliance

Suspension dump valve with control switch in instrument panel

Capacity 20,900kg (46,000lb)

DRIVESHAFTMain Shaft – SPL250XL

Interaxle Shaft – SPL170XL

FUEL SYSTEM870 Litres total capacity

Bright fi nished aluminium 660mm diameter cylindrical tank with alloy steps

Dual Pick-up and return

Fuel cooler, radiator mounted

CABDay Cab 2085mm wide, galvanized steel

Base coat, clear coat paint

ECE-R29 compliant

Tilting SMC hood and removeable quarter fenders.

Bright polished stainless-steel grille surround

Three-point cab mounting system with rear air suspension

Drivers seat: fully adjustable National high-back with air suspension vinyl trim and head rest

Passenger seat: fully adjustable National high-back with air suspension vinyl trim and head rest

Seat belts, 3-point lap & shoulder type

Full instrument panel with on-board diagnostics display for diagnosis of fault codes in gauge cluster

Stowage compartments in overhead console

Premium interior and additional sound insulation

Moulded access handles with 3 point entry and exit

Quarter vent windows, Rear window

Power windows fi tted for both driver and passenger

STANDARD ACCESSORIESInternal sun visors, front and separate side primary visors

Air-Conditioner, Heater with fresh air fi lter system

Twin windscreen wipers/washers, 2-speed with intermittent action

Electronically adjustable heated mirrors with separate spotter mirrors on both sides

Single air-horn, chassis mounted

OPTIONSDriver’s Seat Gramag air suspended, hi-back leather trim with integrated seat belt

Passenger Seat Gramag air suspended, hi-back leather trim with integrated seat belt

Option: Aerodynamic packages available

EXTENDED SLEEPER26” (660mm) Extended (Sleeper) cab with 3770mm BBC

Sleeper includes: Single 660mm x 1840mm x 127mm lower bunk (mattress) dome light, under-bunk storage