Engineered Solutions

IBR 686

Concealed Fix Sheeting

Permanent Structural FormworkPierced Fix Sheeting

Sun Di�users, Walkways & PV Clamps

Products

- Brownbuilt™- Klip-Lok 406™- Klip-Lok 700™- Klip-Tite™- Zip-Tek 420- Zip-Tek 440

Products

- Corrugated- IBR 686- IBR 890 - Nu-Rib- BR 7

Bond-DekAn economical permanent formwork / shuttering which, with concrete, acts as a composite floor slab. This system eliminates the requirement for reinforcing steel. This profile is able to span 3m unsupported under wet concrete thus saving on props. Installation is extremely quick for a further saving in labour cost.

Products- Bond-Lok - Bond-Dek- QC Flooring

Walkways, Sun Di�users & PV Clamps GRS’s Walkways combine unmatched corrosion resistance with strength, long life and safety, Fibergrate Composite Structures Inc. sets the standard for fiberglass reinforced plastic (FRP) molded products. Fibergrate products are lightweight and easy to fabricate.

The Sungazer is a revolutionary lighting product, installed in the roof, that harvests sunlight to deliver full-spectrum natural light to the inside of the building. It also provides significant electrical energy savings as electrical lights can be switched o� during the day when the sun is shining.

GRS provides a range of Solar clamps, manufactured from aluminium that suit our concealed fix systems. Clamps can be provided for GRS’s Brownbuilt™, Klip-Lok, Klip-Tite™ & Zip-Tek profiles.

Klip-Tite™The multi award-winning Klip-Tite™ profile has been an intricate part in the success factor of many buildings decorating the South Africa sky-line. Companies like Cell C, Cummins Africa, Hirt and Carter and Amrod™ preferred Klip-Tite™ to cover their assets. With design traits similar to the popular Klip-Lok 700™, the Klip-Tite™ profile introduced transverse sti�eners, in lieu of the traditional longitudinal pan sti�eners, forming structural members spanning across the width of the pan. The deflection of the pan is thus reduced, increas-ing the wind uplift resistance of the sheet. These transverse pan sti�eners are a first in the South African sheeting market. Site-rolling is also available.

The KL 700 Plus Clip

The new KL 700 Plus clip has improved mechanical grip due to the re-development of the connector spur. This clip has also improved wind loading capabilities. Newly designed and more pronounced sti�eners have improved the rigidity in key areas.

The award winning Klip-Tite™ profile

KL 700 plus clip

Bond-Dek

Fibre Grid Walkways

Sungazer/ Sun Harvester

Pierced Fix SheetingGRS’s pierced fixed range consists of several popular purpose design profiles, including the tranquil Victorian style Corrugated 10.5 and inverted box rib shapes, IBR 686 & 890, Nu-Rib 762 and BR7. These well-established designs o�er optimum strength, mass and load-span characteristics compared to alternative profiles. It still remains the most cost e�ective solution.

KT- PV Clamp™

Bond-DekNatural Vents & Louvers

Automated Vents & Louvers

Industrial Rainwater Goods

Flashings

Natural Louvers

Standard and custom-made louvers are manufactured. The Louvers are designed to operate in conjunction with either mechanically powered or natural ventilators to replace hot stale air. Fixed louvers provide permanent ventilation, whereas adjustable louvers can be set to deliver variable amounts of air depending on the day to day climatic conditions.

Natural Ventilation:Controls the heat load and creates a better and healthier working environment.

Smoke & Fire Ventilation:

• To remove exhaust smoke and heat• To contain smoke and stop lateral travel by means of barriers.• To attain a smoke free zone by ventilation and allowing for make-up air into areas where ventilation is being done.• To assist with the immediate evacuation of a building.• To allow the source of the fire to be pin-pointed.• To help avoid flashover by extracting products of combustion and making sure that smoke does not get entrained back into the fire.• To allow immediate fire fighting.• Contributes to the reduction in damage to property.

Industrial Rainwater Goods

Standard and custom-made Industrial Rainwater Goods include Gutters, Downpipes and Accessories.

Flashings

Standard flashings are manufactured for all roofing profiles in di�erent thicknesses, materials and finishes. Special configurations of flashings can be manufactured to clients’ specifications within certain limitations.

Orion Louvred Roof Ventilator

The South African National Building Standards require that any building or room where the floor space is larger than 500m2 must be provided a system of mechanical or natural smoke ventilation designed in accordance with the latest international standards. RVI has the compliant products to meet these ‘life safety’ building require-ments; the smoke ventilation and extraction systems provided by RVI include:

•Natural Smoke Ventilation by means of certified roof ventilators•Forced Smoke Extraction by means of smoke exhaust fans and ducting•Car Park Ventilation, Smoke Extraction and Smoke Control / Clearance systems•Static and Automated Smoke Curtains•Automated Fire Curtains•Stair Pressurisation & Pressurised Escape Routes•Industrial Ventilation and High Heat Load removal

Internal Sun Shading – Warema BlindsWarema GmbH is the largest single source supplier of venetian blinds, roller blinds, daylight harvesting blinds and ‘sun tracking’ control systems. Warema’s automated blind systems have recently been installed in the PWC Tower in Midrand and the Discovery and Sasol Head O�ce developments in Sandton to name but a few. RVI has the sub Saharan distributorship for Warema and provides an end to end solution to architects, façade engineers, mechanical engineers and sustainability consultants so that the best sun shading systems can be selected for your properties.The design of a building facade is an important aspect of planning. Here it is a matter of combining high aesthetic demands with energy e�ciency, heat insulation and comfort requirements. WAREMA sun shading systems provide you with a considerable amount of freedom.

External Sun ShadingSince 2005 RVI has established itself as a leading sun shading system specialist. Our shading systems include proprietary ‘C’ or ‘Z’ profile continuous louvres, perforated louvres, aerofoil aluminium profiles, and can also incorporate elements such as glass or aluminium composite panels. All systems and products can be supplied as static sun shading elements or the shading elements can be motorised and intelligently controlled to optimise building performance and e�ciency.

The RVI Orion multi-functional roof ventilator is a louvred ventilator available in a wide range of sizes, material options and control configurations. The Orion is classed as a dual purpose ventilator and is suitable to most industrial and commercial buildings where fire ventilation and or day-to-day ventilation is required. The Orion provides Automatic smoke ventilation and normal ventilation (air inlet and extract). The Orion has been successfully designed and tested by internationally accredited Third Party test laboratories in accordance with the latest European Standard EN 12101-2. Each unit undergoes a functional performance and weather-ability test before dispatch.Depending on the application, the Orion ventilator can be orientated at any angle from horizontal to vertical and can be installed into nearly all types of roof and wall structures. Bird-guards, burglar guards and wind ba�es are available as factory fitted options.

Internal Sun Shading Warema Blinds

Smoke Ventilationand Extraction

Architectural Solutions Fixed or Controllable

Stalcor Aluminium Composite Panels

Product Advantages

Alubond Aluminium Composite PanelsAlubond Aluminium Composite Panels consist of two layers of metallic skin like aluminium, sandwiching a core in a continuous co-extrusion process. They have multiple advantages and are aesthetically appealing, lightweight, and weather resistant with a long lifespan. Our brand o�ers an extensive range of finishes and multiple specifications, for the core and dimensions.Alubond is the choice of façade for many architects, and has been used on a range of prestigious projects globally.

Product Composites

Lightweight, yet extremely rigid and flat resulting in an economical option for high quality building facades and interior cladding

Weather resistance combined with high acoustics, Thermal and Fire rated values.

Extensive choice of finishes including Solid, Metallic, Granite, Veneer and Chameleon Colors

Highly malleable gives flexibility of shapes making it a versatile panel to achieve complex design solutions

Aluminium Skin

TOP SKIN

BOTTOM SKIN

Aluminium Skin

Stainless Steel

Aluminium

Carbon

Stalcor stocks and distributes a wide range of Stainless steel products such as austenitic grades 304 and 316, ferritic grades of 430, 409, 444, 441 and 3CR12. Our basket includes duplex stainless steel grades 2205 and 2304.

The range of products available include:

• Cold rolled coil and sheet• Hot rolled coil and sheet.• Hot rolled plate.• Engineering sections, bar, hexagon, angle and flat bar.• Wide range of round, rectangular and square tube.• Welded pipe and fittings

The material is available in widths of 1.25m and 1.5m. Our production facilities include cut to length, slitting, blanking and re-coil country wide. Please visit the website www.stalcor.co.za for more information.

Stalcor distributes an enormous variety of aluminium products that service multiple industries such as construction, boats, planes, trains, automotive, packaging, cell phones, solar energy and the list goes on. The product mix includes all commercial alloys including 1050, 3003, 3004, 5754, 5182, 5083, 6082, 6061, 6063 and 9182 in:

• Flat sheet and coil • Engineering sections• Tread plate/ vastrap • Colour coated products.• Hot rolled plate

The basic characteristics that make Aluminium so versatile include:

• Low density • Ease of forming• High strength to weight ratio • Thermal conductivity• Corrosion resistance • Electrical conductivity

Aluminium is very much a metal for the future. For more information on range of products please visit our website www.stalcor.co.za

Features

We have over 30 years of combined experience giving us the ability to source most mild steel products locally and internationally and supply the best quality at the best prices to the market. We pride ourselves in our ability to provide solutions that work to our custom-ers. Our strength lies in volume based supply as we are a TRADING DIVISION. Our sheet stock holding is limited to A – Line items and the balance of stock in coil form. We o�er full cut to length, blanking and slitting value added services.

The South African National Building Standards require that any building or room where the floor space is larger than 500m2 must be provided a system of mechanical or natural smoke ventilation designed in accordance with the latest international standards. RVI has the compliant products to meet these ‘life safety’ building require-ments; the smoke ventilation and extraction systems provided by RVI include:

•Natural Smoke Ventilation by means of certified roof ventilators•Forced Smoke Extraction by means of smoke exhaust fans and ducting•Car Park Ventilation, Smoke Extraction and Smoke Control / Clearance systems•Static and Automated Smoke Curtains•Automated Fire Curtains•Stair Pressurisation & Pressurised Escape Routes•Industrial Ventilation and High Heat Load removal

The RVI Orion multi-functional roof ventilator is a louvred ventilator available in a wide range of sizes, material options and control configurations. The Orion is classed as a dual purpose ventilator and is suitable to most industrial and commercial buildings where fire ventilation and or day-to-day ventilation is required. The Orion provides Automatic smoke ventilation and normal ventilation (air inlet and extract). The Orion has been successfully designed and tested by internationally accredited Third Party test laboratories in accordance with the latest European Standard EN 12101-2. Each unit undergoes a functional performance and weather-ability test before dispatch.Depending on the application, the Orion ventilator can be orientated at any angle from horizontal to vertical and can be installed into nearly all types of roof and wall structures. Bird-guards, burglar guards and wind ba�es are available as factory fitted options.

ERGO 50Ergo 50 is a robust, fully relocatable demountable partitioning system. It can be used as both a full height or low level system. It has fully integrated power, voice and data capabilities. Panels are 50mm thick and are constructed with an aluminium framework encasing either MDF (medium density fibre) or fibre cement boards. The system caters for both single and double glazing and can accommodate integral venetian blinds.

Kubik Kubik is a unique modular wall and cladding system which is ideal for retrofit - transforming any interior into a totally new environment within hours. It is ideal as partitioning and is especially e�ective when used with translucent materials and back-lighting. The Light-box is a 50mm slim modular wall light-box.

MOFEX Mofex is a quality, a�ordable, modular, pre-engineered, customisable component clip-on system. Accurate and precise, it is manufactured o� site and installed fast with no mess. No stress and no surprises! Existing walls do not need any preparation or special construc-tion. Pre-manufactured panels in a variety of finishes are simply clipped on or o�. Metal spacers allow for surface mounted conduits, pipes and electrical cables to be easily concealed.

Wovin Wall Wovin Wall is a modular system which can be extended in any direction to suit most spaces. For interiors which change frequently (such as exhibition and retail spaces), the modular nature of the Wovin Wall product, and its derivatives - Wave Wall and Ripple Wall - are the perfect medium to reflect new colour schemes, product launches or seasonal changes. Wovin Wall is available in an oval or standard tile, in a wide variety of standard finishes such as 3Form C3 Color, wood veneer, polyres-in, laminate and anodised aluminium.

Horizon Horizon slimline system is ideally suited as low level o�ce based partitioning/screening. The fully relocatable screens are quickly and easily installed and configured, due to the simplistic system design and minimal componentry. The 23mm thick system is totally modular and has a stacking option whereby additional height can be created in strategic areas.

Acoustics-2-GoThe use of wall and ceiling ba�es can improve the acoustics in corporate environments by absorbing "noise". The creative use of panels can add to the aesthetics at the same time.

Sidio Sidio is a single and double glazed system which compensates for both ceiling and floor unevenness. This elegant, low profile system is used in executive o�ces, meeting rooms, the terminals, and canteens.

Cemax Cemax, a heavy duty demountable partitioning system, which allows you the option of solid or glazed paneling, as well as design accessories to maximize the e�ciency of your space. Perfect for corporate, retail, pop-up enterprises and the hospitality industry. The clip-on and clip-o� finishes allows for adding eye-catching and practical display boards, mirrors, personal lighting fixtures and various other essential display tools. Installation requires no messy construction or drilling.

Partitioning Systems ERGO 50

Cladding Systems

Consolidated Steel Industry (PTY) LTD. Corner Barlow & Quality, Isando, Johannesburg, 1600.

CSI tel: 011 898 2900GRS tel: 011 898 2900

Helm tel: 011 898 2900Stalcor tel: 011 871-6900

RVI tel: 011 047 8280 | 011 608 4640Alubond tel: 011 871-6900

Ergosystem tel: 011 801 9560

website: www.csisteel.co.za

South Africa

Botswana

Zimbabwe

Namibia

Mozambique

Ghana

Zambia

Aluminium optimization software

Aluminium extrusions

Architectural hardware

Calculates your cutting schedule,ordering list and inertia rating. Easy to use program and is currently being approved by AMSA.

• Suppliers of architectural systems• Shop fronts• Casement Windows • Patio Doors / Heavy Duty Doors• Curtain Walling

We also supply systems to customer own designed products

Stalcor Systems sources the best quality hardware Coastal grade and inland at a�ordable prices.We complement all aluminum systems sold with our own quality hardware products which are available.

Light Steel Frame

Timber roof truss

Light Steel Frames

Light Steel Frame Building is a term used internationally to define a building system in which the main structural elements, such as structural wall frames, roof trusses and floor joints, are manufactured from cold-formed light gauge galvanised steel.

Steel Trusses

- Steel is high in strength and durable, and therefore results in safer structures and little maintenance.- Steel has the highest strength to weight ratio of all building materials. - Galvanised steel resists rust and corrosion. - Using steel as building material enables exceptional design flexibility and versatility in building. - Steel is fire retardant.- Resists termites, fungi, borers and rodents, mould and mildew. - Except for the galvanising process, no excess chemicals are used to treat steel as used in the treatment of timber.- Small probability of foundation problems because of the light weight of structure and strong connections. - Steel is 100% recyclable.- Steel does not expand and contract with di�erentiation in humidity. - Steel o�ers protection against lightning strikes. - Does not interfere with TV, radio or cell phone signals.- It serves as a good sound insulator.

Timber roof truss

National Accredited Timber roof truss solutions for housing and commercial projects. ISO 9001 and backed with an International PI insurance manufacturer. Furthermore, GRS Timber Truss manufacturers are backed up using the latest Roof Truss engineering software with the most widely used rafter design package. Therefore, providing cost e�ective timber truss solutions to our clients including the correct usage of eco products for timber trusses. All products and designs are Engineered backed up.

Timber Roof trusses –provide the following:

- The strongest timber connection system- ISO 9001 accredited and backed with an international P.I insurance- World proven technology and back-up- Suitable for most roof shapes from simple to very complex

CSI is a market leading industrial conglomerate that comprises two principal business units, namely:

Global Roofing Solutions (“GRS”), one of the largest metal roofing and roofing accessory manufacturers in South Africa, servicing the construction and roofing industries in South Africa and Sub-Saharan Africa; and Stalcor, one of the top three distrib-utors of stainless steel and aluminium products in South Africa, servicing customers in the fabrication sector and steel merchants.

CSI’s combining of its project based businesses (GRS) and its trading businesses (Stalcor) has promoted synergies and created balanced revenue and cash flow streams for the group.

About CSI

The CSI businesses are pedigreed, having:

• Highly established brands in the construction and steel fabrication industries;• Trading histories spanning over 50 years;• A profitable and highly sought after African footprint;• Innovative and skilled management teams;• A stable work force of approximately 1,000 people;• A high growth history over the past 6 years – which bears testament to e�ective counter cyclical economic strategies; and• Expected double digit growth over the next 3 years, despite a slow growth economy.

CSI’s African operations are all profitable, driven by strong local management teams who have partnered with relevant developers, construction companies and contractors. The African footprint would be di�cult and costly to replicate, and creates a competitive advantage for the Company. CSI is and will be realising continued high growth coming from its African operations.

GRS Division

Stalcor Division

GRS is principally a project based business servicing the metal roofing and roofing accessories market in South Africa. The quality and variation of GRS’ product portfolio is envied by its competitors. The primary products of the division include roofing profiles, steel roofing tiles, flooring profiles and roof sheeting products. The business has operations in South Africa and in seven African countries outside of South Africa, namely Namibia, Zambia, Zimbabwe, Botswana, Mozambique, Ghana and Cote d’ivoire. The GRS division also comprises the business of Helm that manufactures fire and smoke ventilation systems in the main.

Stalcor is a metals trading business, processing and distributing stainless steel, aluminium and carbon steel products sourced both locally and abroad. The division has enjoyed a top three market share position in South Africa over the past 43 years acting as a significant distributor for major steel manufacturers, including Columbus Stainless (stainless steel) and Hulamin (aluminium).

ISANDO:

GLOBAL ROOFING SOLUTIONS: 011 898 2900STALCOR: 011 871 6900 ALUBOND: 011 871 6900RVI: 011 047 8280HELM: 011 898 2900ERGOSYSTEM: 011 801 9560

CAPETOWN:

GLOBAL ROOFING SOLUTIONS: 021 521 1900STALCOR: 021 928 2500ALUBOND: 021 928 2500RVI: 011 047 8280 HELM: 021 521 1900

DURDAN:

GLOBAL ROOFING SOLUTIONS: 031 538 0940STALCOR: 031 719 1000 ALUBOND: 031 719 1000RVI: 011 047 8280HELM: 031 538 0940

PORT ELIZABETH:

GLOBAL ROOFING SOLUTIONS: 041 486 1270STALCOR: 041 486 1280ALUBOND: 041 486 1280HELM: 041 486 1270

EAST LONDON:

GLOBAL ROOFING SOLUTIONS: 043 731 1895HELM: 043 731 1895

NELSPRUIT:

GLOBAL ROOFING SOLUTIONS: 013 492 0746HELM: 013 492 0746

Directory

POLOKWANE:

GLOBAL ROOFING SOLUTIONS: 015 293 0313HELM: 015 293 0313

RUSTENBURG:

GLOBAL ROOFING SOLUTIONS: 014 596 6121HELM: 014 596 6121

MOSSELBAY:

GLOBAL ROOFING SOLUTIONS: 044 695 0014HELM: 044 695 0014

UPINGTON:

GLOBAL ROOFING SOLUTIONS: 054 332 1659 HELM: 054 332 1656

BLOEMFONTEIN:

GLOBAL ROOFING SOLUTIONS: 082 579 2389HELM: 051 432 3724