CSI-206TPPThermal Protective Performance Tester

This instrument is the most suitable instrument for rating textile materialsfor thermal resistance insulation when the material is subjected to convectiveand radiant energy for a short period of time. Articles that apply may includemultilayer garmet composites, hoods, shrouds, wristlets, gloves, other singlelayer knit hoods that are worn in contact with the skin.

References:

ASTM D4108 Thermal Protective Performance of Materials for Clothing by Open-FlameMethod.NFPA 1976 Standard on Protective Ensemble for Proximity Fire Fighting.NFPA 1971 Standard for Protective Ensemble for Structural Fire Fighting.ISO 17492 Clothing for Protection against heat and flame - Determination of heattransmission on exposure to both flame ans radiant heat.

Manufactured from qualitycomponents, the TPP-206exceeds the requirements ofASTM D 4108 for ThermalProtective performance ofMaterials for clothing byOpen-Flame Method.Meets NFPA-1976 andNFPA-1971 for ThermalProtective Performance(TPP) Testing.The instrument consists ofa table top cabinet, housingat its base the radiant andconvective heat sources, thewater cooled shutter, andthe sample holding frame.The control panel featuresall necessary componentsfor the operation of theapparatus. With theoptional data acquisitionpackage, the TPP-206 iscapable of testing materialswith unparalleledaccuracy, repeatability andconvenience.

Standard Features

• Copper Calorimeter, features four thermocouple pile, manufactured per NFPA 1976 and NFPA 1971.

• Dual thermal flux source, convective and radiant. Convectivesource includes a pair of gas burners set at 45 degrees from thevertical, the radiant source includes nine quartz infrared tubes.

• Protective Water cooled shutter positioned between the thermalflux source and the specimen.

• Sample Holder Assembly

• Calibration Specimen

• Ignition wand and heat resistant gloves

• Chart Recorder Connections

• CSI certificate of Conformity

Dimensions: 30" (76 cm) H x 38" (97 cm) L x 30" (76 cm) W

Weight: 175 lbs (80 kg)

Electrical: 230 VAC, 60 Hz, 1 Ph 30 AOthers available upon request

Specifications

Optional Features

• Computer Data Acquisition and Analysis System: includes IBMcompatible personal computer, printer, color monitor, dataacquisition system, and TPP-206 software package.

• Chart Recorder, programmable, with memory backup, two pen,4"chat width. Interactive display for easy setup.

Disclaimer: Product improvement is a continuing goal at CSI. Designs and revisions are subject to change without notice or obligation.

1125 Conroy PlaceEaston, Pennsylvania 18040 USA

Phone: 610-923-6500 Fax: 610-923-6543www.CSI-Instruments.com

Model TPP-206Thermal ProtectivePerformance Tester