Cse & WTe 500 - Aermec
4
CSE & WTE 500 FLAT BED UNIT 1 OR 2 ROW OF FANS AIR COOLED CONDENSED UNIT | DRY COOLER UNIT DOUBLE ROW OF FANS SINGLE ROW OF FANS
Transcript of Cse & WTe 500 - Aermec
Cse & WTe 500FlaT bed uniT1 or 2 roW oF Fans
air cooLed condensed Unit | drY cooLer Unit
double roW oF Fans
sinGle roW oF Fans
AIR CONDENSER AND lIquID COOlERSwITH AxIAl fANS• Configuration: 1 or 2 exchangers• 1 or 2 indipendent circuits• 1 or 2 fans row• Wide range of capacity• 228 models available as condenser• 228 models available as dry coolers• Fan diameter: 500 mm• Number of fans: from 1 to 8• Vertical for the single raw of fans or horizontal installation for single row or double row
CONSTRuCTION CHARACTERISTICSThey are realized with technologies and material which guarantee strength against atmospheric agents.High efficiency finned block heat exchangers realized with copper tubes and alluminium fins. New generation axial fans with 500 mm diameter both available version AC and EC chosen for minimizing the energy consumption. Standard unit are supplied with cabled fans and electrical box with clamps.
AVAIlAblE fANSBM°: 4-poles 1-phaseBTD: 4-poles with delta connectionBTY: 4-poles with star connectionSM°: 6-poles 1-phaseSTD: 6-poles with delta connectionSTY: 6-poles with star connectionEM°: 8-poles 1-phaseETD: 8-poles with delta connectionETY: 8-poles with star connectionCMB: fan motor 1-phase EC high-powerCME: fan motor 1-phase EC low noise levelCTB: fan motor 3-phase EC high-power
ACCESSORIESCSE and WTE unit could be equipped with main switch, switchboard, cut phase fan speed regulator (with 1 set point or 2 set point) or EC controller and temperature sensor, pressure sensor or 0-10V signal.All fan motors could be equipped with switch for each motor. Anti-vibration device are also available for reducing machine’s vibrations and only for dry coolers flanges in oreder to simplify hydraulic connection.
Models
Model
Main switch
Switch for each motor
Switchboard
Phase cut regulatori
Controller ec
Probe
Anti-vibration device
CSE-WTE BM° p p p p p p
CSE-WTE BTD p p p p p p
CSE-WTE BTY p p p p p p
CSE-WTE SM° p p p p p p
CSE-WTE STD p p p p p p
CSE-WTE STY p p p p p p
CSE-WTE EM° p p p p p p
CSE-WTE ETD p p p p p p
CSE-WTE ETY p p p p p p
CSE-WTE CMB p p p p p p
CSE-WTE CME p p p p p p
CSE-WTE CTB p p p p p p
Cse condenser and WTe dry cooler’s serie meet equipment’s power requirements.They are available from 1 up to 8 fans both version aC and eC.
CApACITYIn air condenser unit power range with refrigerant R134a is from 3.1 up to 72.5 tons (ambient air temperature +77°F, average condensing temperature +104°F according to EN 327)
In air condenseer unit power range with refrigerant R410A is from 3.7 up to 85 tons (ambient air temperature +77°F, average condensing temperature +104°F according to EN 327)
In dry cooler unit power range with ethylene glycol 30% is from 2.8 up to 70 tons (ambient air temperature +77°F, inlet liquid temperature +104°F outlet liquid temperature +95°F according to EN 1048)
TeChniCal draWinG
Quota a
- CSE/WTE° 501(3/4) (single row of fans)
- CSE/WTE° 502(3/4) (single row of fans)
- CSE/WTE° 503(3/4) (single row of fans)
- CSE/WTE° 504(3/4) (single row of fans)
- CSE/WTE° 506(3/4) (double row of fans)
- CSE/WTE° 508(3/4) (double row of fans)
0 50 100
150
200
250
300
CTB
CME
CMB
ETY
ETD
EM°
STY
STD
SM°
BTY
BTD
BM°
kW (T.air 25°C - T.cond 40°C)
CSE 500 R134a
0 50 100
150
200
250
300
350
CTB
CME
CMB
ETY
ETD
EM°
STY
STD
SM°
BTY
BTD
BM°
kW (T.air 25°C - T.cond 40°C)
CSE 500 R410A
0 50 100
150
200
250
CTB
CME
CMB
ETY
ETD
EM°
STY
STD
SM°
BTY
BTD
BM°
kW (T.air 25° - T.liq 40/35°C)
WTE 500
39 in
76 in
113 in
150 in
113 in
150 in
Quota A
Quota A
32.8in
65.6 in
47.3in
65.6 in
34.3 in
AERMECAddress: 1608 Bonhill Road. Mississauga, Ontario, CA L5T 1C7 Website: www.aermec.usEmail: [email protected]: 1-800-567-2221US: 1-888-567-2227
