CS73327.00-15
description
Transcript of CS73327.00-15
-
Product Name: Heat Shrinkable Cable Sleeves
Nokia Code(s): CS 73327.00 CS 73327.02 CS 73327.03CS 73327.05 CS 73327.07 CS 73327.08CS 73327.09 CS 73327.10 CS 73327.11CS 73327.12 CS 73327.13 CS 73327.14CS 73327.15
An adhesive lined heat shrink tubing with environmental sealing capability ideal for a variety ofapplications including automotive and marine wire harness bundles, military and industrial splices,breakouts and connectors to cable transitions
Nokia Code Shrink Ratio Colour Lenght
CS 73327.00 3.2 / 1.0 Black 1200 mmCS 73327.02 6.4 / 2.0 Red 1200 mmCS 73327.03 6.4 / 2.0 Black 1200 mmCS 73327.05 6.4 / 2.0 Blue 1200 mmCS 73327.07 12.7 / 4.1 Red 1200 mmCS 73327.08 12.7 / 4.1 Blue 1200 mmCS 73327.09 12.7 / 4.1 Black 1200 mmCS 73327.10 19.1 / 7.5 Blue 1200 mmCS 73327.11 19.1 / 7.5 Red 1200 mmCS 73327.12 19.1 / 7.5 Black 1200 mmCS 73327.13 25.4 / 8.1 Blue 1200 mmCS 73327.14 25.4 / 8.1 Red 1200 mmCS 73327.15 25.4 / 8.1 Black 1200 mm
Manufacturer: DSG-Canusa, a division of Shawcor Ltd.; http://www.dsgcanusa.comPackage Size: 1 pcCountry of Origin: Canada
Vendor: Elektroskandia OyAddress: Pivlisentie 2, FIN-00390 HelsinkiTel. +358 10 509 311Fax +358 10 5093 575E-mail: [email protected]
http://www.elektroskandia.fi/http://www.hagemeyer.com/
-
INSULATESEALPROTECT
CPA100
Features
Adhesive lined Heat Shrink Tubing with EnvironmentalSealing capability ideal for a variety of applications includingautomotive and marine wire harness bundles, military, andindustrial splices, breakouts and connectors to cable transitions
Flame retardant
Superior sealing against water, moisture, or other contaminants
High shrink ratio allows for coverage of irregularly shaped connectors and components
Inner adhesive bonds to: plastics, rubber, neoprene, steel and polyethylene
Meets: MIL-DTL-23053/4, Class 3
Continuous operating temperature: -55C to 110C
Shrink temperature: 120C
FLAMERETARDANT*
Thin Wall Adhesive-LinedCrosslinked Polyolefin CCPPAA 1100003:1STANDARD
SHRINK RATIO
-
EXPANDED
CCPPAA 110000 Thin Wall Adhesive-Lined Crosslinked PolyolefinTechnical Data Physical
Property Test Method Typical Performance
D dwExpanded as supplied
Fully recovered after heating
DimensionsORDER REF. NO.
METRIC IMPERIALINTERNAL DIAMETER
(MIN)INTERNAL DIAMETER
(MAX)WALL THICKNESS
(NOM)NOMINAL MELTABLE
WALL THICKNESS LENGTHS
Tensile Strength ASTM D2671, ISO 37 2200 psi (15.0 MPa)Elongation ASTM D2671, ISO 37 400%Longitudinal Change ASTM D2671 +1/- 15%2% Secant Modulus ASTM D2671 16000 psi (110 MPa)Specific Gravity ASTM D792, ISO R1183 1.1Heat Resistant Properties No cracking or flowing(168hrs at 175C)
MIL-DTL-23053/4of outer wall
Heat Shock No cracking or flowing(4hrs at 250C) ASTM D2671 of outer wallLow Temperature Flexibility(4hrs at -55C)
ASTM D2671 No cracking
Flammability ASTM D2671 FlameRetardant (outer wall)(except clear)
ElectricalDielectric Strength ASTM D2671 600 V/Mil (24kV/mm)Volume Resistivity ASTM D2671 1016 ohm-cm
ChemicalFluid Resistance MIL-DTL-23053/4, Good to Excellent
ISO 1817, ISO 37
Copper Corrosion ASTM D2671 No CorrosionWater Absorption ASTM D570 0.2%Fungus Resistance ASTM G21 No Growth
RECOVERED
Dmm IN
dmm IN
wmm IN mm IN m IN
0032 0125 3.2 1/8 1.0 0.040 1.0 0.040 0.5 0.020 1.2 48
0047 0187 4.7 3/16 1.5 0.060 1.0 0.040 0.5 0.020 1.2 48
0064 0250 6.4 1/4 2.0 0.080 1.0 0.040 0.5 0.020 1.2 48
0079 0312 7.9 5/16 2.5 0.100 1.3 0.050 0.7 0.027 1.2 48
0095 0375 9.5 3/8 3.2 0.125 1.5 0.060 0.7 0.027 1.2 48
0127 0500 12.7 1/2 4.1 0.160 1.8 0.070 0.8 0.030 1.2 48
0191 0750 19.1 3/4 7.5 0.250 1.8 0.070 0.8 0.030 1.2 48
0254 1000 25.4 1 8.1 0.320 2.5 0.100 1.0 0.040 1.2 48
0318 1250 31.8 1 1/4 10.6 0.416 2.5 0.100 1.0 0.040 1.2 48
0381 1500 39.9 1.57 13.0 0.510 2.5 0.100 1.0 0.040 1.2 48
Standards: MIL-DTL-23053/4, Class 3
REV 3
Select a dimension which will shrink snugly over the component to be covered. If recovery is restricted the resultant wall thickness will be lessthan specified. For each item, please specify the product name plus each ofthe following options:
Ordering
1 Order Reference NumberSee above in the Dimensions chart
2 Color Optionsblack redblue clear
3 Printing Optionsprinted unprinted
4 Length Options(specify metric or imperial)48 (1.2m) lengthsFor continuous reels contact Customer Service
For Example: CPA 100, 0125, black, unprinted, 48 lengths
FOR INFORMATION ON CUSTOM COLORS, SIZES AND LENGTH OPTIONSCONTACT YOUR CUSTOMER SERVICE REPRESENTATIVE.
Theres no end to what we coverUsing heat shrink technology, DSG-Canusa provides electrical and mechanicalinsulation for electrical/utility, communications, automotive, and electronic markets. Our continued investment in research and development continues toyield new products to meet industry trends. Moreover, an aptitude and readinessto engineer unique solutions to suit Customer applications has earned us a reputation of excellence in Customer satisfaction. DSG-Canusa is a marketleader with manufacturing and support facilities throughout the globe.
AMERICASDSG-Canusa, a division of Shaw Resource Services, Inc.173 Commerce Blvd.Cincinnati, Ohio 45140
Toll Free: 1-800-422-6872Tel: (513) 683-7800Fax: (513) 683-7809E-mail: [email protected]
CANADA / ASIA PACIFICDSG-Canusa, a division of Shaw Industries Ltd. 25 Bethridge RoadToronto, Ontario M9W 1M7
Toll Free: 1-800-845-6808Tel: (416) 743-7111Fax: (416) 743-7752E-mail: [email protected]
EUROPE / MIDDLE EAST / AFRICADSG-Canusa GmbH & Co. KGHeidestrae 5D-53340, MeckenheimGermany
Tel: 49 0 22 25/88 92-0Fax: 49 0 22 25/88 92-44E-mail: [email protected]
www.dsgcanusa.com
All information contained in this leaflet is believed to be reliable. We advise however that customers should separately evaluatethe suitability of our products for their particular application. DSG-Canusa and Shaw Industries give no guarantees in respect of theaccuracy or sufficiency of the information presented and disclaim any liability regarding its use. Our responsibilities are only thoselisted in our Standard Terms and Conditions of Sale for these products. In no instance will we be liable for any eventual, indirect, orconsequential damage or damages arising from the sale, resale, transfer, use or misuse of the product.