CS Catalog No Price - Converter Servicesconverterservices.com/info/CS_Catalog.pdf · Equipment for...

Layers of Service Covering All of Your Needs

• Holders

• Spare Parts

• Knives & Sharpening

• Thru-Hardened Sleeves

• Repair Service

Layers of Service Covering all of your Needs

Converter Services SCORE CUT HOLDERS

Parts & Services

Equipment for the Paper, Film, Foil, Textile & Nonwoven Industries

Equipment for the Paper, Film, Foil, Textile

& Nonwoven Industries

Converter Services offers options to meet your

production needs. We specialize in supplying the converting industry with quality products, services and repairs. With over 40 years of industry experience, we pledge to maintain a high standard of quality service. We look forward to being your supplier of choice for these and other items:

SCORE CUT HOLDERS

REPLACEMENT KNIVES & SHARPENING SERVICES

SPARE PARTS

THRU-HARDENED SLEEVES

REPAIR SERVICES

PO Box 2586 Shelby, NC 28151-2586

Phone: 704-482-3855 Fax: 704-471-0139

Email: [email protected]


Model #654831

Model #654927

Model #654803

European Style

1755-A

PO Box 2586 Shelby, NC 28151-2586

Phone: 704-482-3855 Fax: 704-471-0139

Email: [email protected]

www.converterservices.com

• 654803 • 654831 • 654927

We’ve Got Your Numbers!

PO Box 2586 Shelby, NC 28151 Phone: 704-482-3855

Fax: 704-471-0139 Email: [email protected]

704-482-3855


• Holders

• Spare Parts

• Knives

• Repair Services

WWW.CONVERTERSERVICES.COM


AMERICAN TYPE SCORE CUT KNIFE HOLDERS MODELS #654

MODEL NUMBER MIN. CUT DESCRIPTION PRICE - U.S. DOLLARS

654803 1/2" 1/2" Wide Holder, 1-1/2" dia. Cylinder CALL FOR PRICING

and FlexibleCable complete with:

#229002 Knife #101962 Bearing

#654193 Axle

654804 1-1/2" 1/2" Wide Holder, 1-1/2" dia. Cylinder

Direct Connected, complete with:

#229002 Knife #101962 Bearing

#654193 Axle

654927 1" 1" Wide Holder, 1-1/2" dia. Cylinder

Direct Connected, Short Coupled,

4" OD Knife complete with:

#229139 Knife #654046 Axle Nut

#654847 Axle #100084 Bearing (2)

654928 Same as above, except

Long Coupled

NOTE: 1" Minimun cut can be

accomplished only if Short and

Long-Coupled Holders are stacked

alternatley.

654831 1-1/2" 1-1/2" Wide Holder, 1-1/2" dia. Cylinder,

Direct Connected, double bearings for

high speed operation, complete with:

#229002 Knife #654085 Axle Nut

#654084 Axle #101962 Bearing (2)

NOTE: Up to 1000 fpm use Holders

#654803 or #654803

Over 1000 fpm use Holders

#654927, #654928 or #654831

654805 1/2" #654803 Holder WITHOUT

Knife, Axle or Bearing

654806 1/2" #654803 Holder WITHOUT

Knife or Bearing

654807 1/2" #654803 WITHOUT

Knife

654813 1/2" #654803 Holder WITH

#229004 Knife

654814 1/2" Old Style with #229004 Knife

654890 1/2" 1/2" Score Cut Knife Holder

complete, Old Style

654891 1-1/2" Direct connect, Old Style PRICES FOB SHIPPING POINT

11/01/2011 PRICES SUBJECT TO CHANGE WITHOUT NOTICE

Holder #654803 1/2” Wide Holder, 1-1/2” diameter Cylinder and Flexible Cable Complete with:

• #229002 Knife

• #654193 Axle

• #101962 Bearing Min. Cut: 1/2”

Holder #654804 1/2” Wide Holder, 1-1/2” diameter Cylinder Direct Connected Complete with:

• #229002 Knife

• #654193 Axle

• #101962 Bearing


PARTS NUMBER Dusenbery Type Score Cut Knife Holder Model #654803/804 PRICE - U.S. DOLLARS

101329 SNAP RING CALL FOR PRICING

101330 ROLL PIN

101331 PISTON CUP

101961 BEARING, USED WITH KNIFE 793-A (DUSENBERY# 229004)

101962 BEARING, USED WITH KNIFE #229002

101963 FEMALE SOCKET

654014 SPACER

654015 PISTON PLATE

654016 CYLINDER HEAD (REMOVABLE

654017 SCREW BLOCK (MUST BE DRILLED AFTER ASSEMBLY)

654018 SCREW PLATE

654019 CLAMP

654021 CONNECTING BUSHING (FOR HOLDER #654804)

654022 PUSH ROD (FOR HOLDER #654804)

654024 FLEXIBLE CABLE (FOR HOLDER #654803)

654026 RETURN SPRING

654088 WASHER

654187 CYLINDER & FIXED HEAD ASSEMBLY

654192 YOKE

654193 AXLE, USED WITH KNIFE #229002

654195 AXLE, USED WITH KNIFE #793-A (DUSENBERY #229004)

654802 HARDENED HOLDER ONLY

654902 CABLE ASSEMBLY, CONSISTING OF FLEXIBLE CABLE,

WASHER, PISTON CUP, NUT, CYLINDER HEAD, RETURN

SPRING, PISTON PLATE & HEX JAM NUT

654903 CYLINDER & HOSE ASSEMBLY, CONSISTING OF FEMALE

SOCKET, SNAP RING, CYLINDER & FIXED HEAD ASSEMBLY

AND HOSE & MALE SOCKET ASSEMBLY

654918 PUSH ROD ASSEMLBY, CONSISTING OF PISTON CUP,

CONNECTING BUSHING, NUT, PUSH ROD, PISTON PLATE,

RETURN SPRING, CYLINDER HEAD & WASHER

NOTE HOSES SUPPLIED WITH SHORT STEM

819508 HOSE & MALE SOCKET ASSEMBLY

18" LG W/SHORT STEM, W/0 FEMALE SOCKET

1/4--28 HEX JAM NUT

3/8 X 24 HEX NUT

8-32 X 1/2 PHILIPS FLAT HEAD SCREW

8-32 X 7/8 SOCKET HEAD CAP SCREW

1/4-20 X 1-1/4 FILLISTER HEAD SCREW

M4-0.7 X 12 FLAT PHILLIPS HEAD MACHINE SCREW

PRICES FOB SHIPPING POINT


Holder #654831 1-1/2” Wide Holder, 1-1/2” diameter Cylinder Direct Connected, double bearings for high speed operation Complete with:

• #229002 Knife

• #654084 Axle

• #654085 Axle Nut

• #101962 Bearing (2)

Min. Cut : 1-1/2”

PARTS NUMBER Dusenbery Type Score Cut Knife Holder Model #654831 PRICE - U.S. DOLLARS

229002 SCORE CUT KNIFE CALL FOR PRICING

101329 SNAP RING

101331 PISTON CUP

101962 BEARING (2 REQUIRED)


103393 ROLL PIN (YOKE) (2 REQUIRED)

103642 ROLL PIN LATCH

108926 GROOVE PIN (2 REQUIRED)

654015 PISTON PLATE


654021 CONNECTING BUSHING

654022 PUSH ROD


654076 SPACER

654080 SPACER

654082 GUIDE (2 REQUIRED)

654083 YOKE

654084 AXLE

654085 AXLE NUT

654086 LATCH

654088 WASHER

654090 CABLE BAR




AND #819508 HOSE & MALE SOCKET ASSEMBLY

654918 PUSH ROD ASSEMLBY, CONSISTING OF PUSH ROD, NUT

PISTON CUP, PISTON PLATE, RETURN SPRING,

CONNECTING BUSHING, CYLINDER HEAD & WASHER

AND HEX JAM NUT

739102 GARTER SPRING (2 REQUIRED)

NOTE

ALL HOSES SUPPLIED WITH SHORT STEM



1/4--28 HEX JAM NUT

8-32 X 3/8 PHILLIPS FLAT HEAD SCREW






Holder #654927 1” Wide Holder, 1-1/2” diameter Cylinder Direct Connected, Short coupled, 4” Knife Complete with:

• #229139 Knife

• #654847 Axle

• #654046 Axle Nut

• #100084 Bearing (2)

Min. Cut : 1”

Holder #654928 1” Wide Holder, 1-1/2” diameter Cylinder Direct Connected, Long coupled, 4” Knife Complete with:

• #229139 Knife

• #654847 Axle

• #654046 Axle Nut

• #100084 Bearing (2)

PARTS NUMBER 4" OD SCORE CUT KNIFE HOLDER #654927 & #654928 PRICE - U.S. DOLLARS

229139 SCORE CUT KNIFE (4" OD) CALL FOR PRICING

100084 BEARING (2 REQUIRED)

101329 SNAP RING

101331 PISTON CUP


103643 ROLL PIN 3/16 X 1"

654015 PISTON PLATE



654039 SCREW PLATE

654041 SPACER

654042 YOKE GUIDE PLATE (2 REQUIRED)

654043 CLAMP

654044 YOKE

654046 AXLE NUT





654088 WASHER


654818 SIDE PLATE ASSEMBLY

654819 CYLINDER ASSEMBLY CONSISTING OF SNAP RING

PISTON CUP, PISTON PLATE, CYLINDER HEAD,

654021 CONNECTING BUSHING, 654048 PUSH ROD,

RETURN SPRING, WASHER, CYLINDER & FIXED HEAD

ASSEMBLY & HEX JAM NUT

654847 AXLE (2 PIECES)

NOTE ALL HOSES SUPPLIED WITH SHORT STEM



1/4--28 HEX JAM NUT


5/16 -18 X 1-1/4 SCOKET HEAD CAP SCREW




1755-A INTEGRAL LEVER HOLDER, COMPLETE WITH HEAVY DUTY SPRING

PARTS NUMBER 1755-A INTEGRAL LEVER PRICE - U.S. DOLLARS

1755-A INTEGRAL LEVER HOLDER, COMPLETE WITH HEAVY DUTY SPRING

Call for Pricing

101961 BEARING - BM0001

787-A AXLE

865-B YOKE (SPRING & AXLE HOLDER)

793-A 3" OD X .866 ID

802 SPRING

874 SPRING, HEAVY DUTY

1758 KEEL



Holder #654890

1/2” Score Cut Knife Holder complete, Old Style

Min. Cut: 1/2”

Holder #654891 Direct connect, Old style

PARTS NUMBER Dusenbery Type Score Cut Knife Holder Model #654890/891 PRICE - U.S. DOLLARS

101329 SNAP RING Call for Pricing

101330 ROLL PIN

101331 PISTON CUP

101961 BEARING, USED WITH KNIFE # 229004 (CAMERON #793-A)

101962 BEARING, USED WITH KNIFE #229002


654012 AXLE, USED WITH KNIFE #229004 (CAMERON #793-A)

654013 AXLE, USED WITH KNIFE #229002

654014 SPACER

654015 PISTON PLATE


654017 SCREW BLOCK (MUST BE DRILLED AFTER ASSEMBLY)

654018 SCREW PLATE

654019 CLAMP

654020 YOKE, ROUND END



654024 FLEXIBLE CABLE (FOR HOLDER #654890)


654088 WASHER

654113 YOKE, SQUARE END


654801 HARDENED HOLDER ONLY

654902 CABLE ASSEMBLY, CONSISTING OF FLEXIBLE CABLE,

WASHER, PISTON CUP, 3/8 NUT, CYLINDER HEAD, RETURN

SPRING, PISTON PLATE & HEX JAM NUT



AND HOSE & MALE SOCKET ASSEMBLY

654918 PUSH ROD ASSEMLBY, CONSISTING OF NUT, PUSH ROD,

CONNECTING PISTON PLATE, RETURN SPRING,

CYLINDER HEAD & WASHER

NOTE ALL HOSES SUPPLIED WITH SHORT STEM



1/4--28 HEX JAM NUT

3/8--24 HEX NUT


8-32 X 7/8 SOCKET HEAD CAP SCREW





GERMAN STYLE 1/2” PNEUMATIC STYLE HOLDERS See Price List

• 716-000-572

• 716-001-572

• 716-002-572

• 716-003-572

• 716-004-572

• 716-005-572

• 716-006-572

CONVERTER SERVICE

PO BOX 2586

SHELBY, NC 28151

PARTS NUMBER GERMAN STYLE 1/2” PNEUMATIC STYLE HOLDERS PRICE - U.S. DOLLARS

716-000-572 1/2" PNEUMATIC SCORE KNIFE ASSEMBLY, COMPLETE Call for Pricing

WITH STEEL BRAIDED HOSE, GERMAN CHROME TYPE

COUPLING, #793-A KNIFE & #BM-001 BEARING

716-001-572 1/2" PNEUMATIC SCORE KNIFE ASSEMBLY, COMPLETE

WITH PVC HOSE, GERMAN CHROME TYPE COUPLING,

#793-A KNIFE & BM-001 BEARING


WITH PVC HOSE, AMERICAN TYPE COUPLING,

#229002 KNIFE & #101962 BEARING



#793-A KNIFE & #BM-001 BEARING


WITH PVC HOSE, GERMAN CHROME COUPLING, #229002

KNIFE & #101962 BEARING


WITH STEEL BRAIDED HOSE, AMERICAN TYPE



WITH PVC HOSE, FOSTER COUPLING, #793-A KNIFE,

& #BM-001 BEARING

716-999-572 QUICK CLAMP

BM-001 BEARING

229002 SCORE CUT KNIFE (3.03 X .748 X .244)

793-A SCORE CUT KNIFE (3.03 X .866 X.244)

01-61-22017 CLAMPING WEDGE

01-61-34017 CLAMP BLOCK (FOR SERIES 60 HOLDER, OLD STYLE

01-61-34018 CLAMP BLOCK (FOR SERIES 70 HOLDER, NEW STYLE

05-18-05001 CYLINDER

11-40-30004 GASKET SEAL

11-40-30004-HD GASKET SEAL, HEAVY DUTY

14-15-00080 CUTTER BEARING HOUSING (YOKE)

14-15-00080-A CUTTER BEARING HOUSING (YOKE-GERMAN STYLE)

23-03-20004 AXLE (FOR USE WITH #793-A KNIFE & #BM-001 BEARING)

23-41-00001 SPRING RETAINER

30-11-11010 RETURN SPRING

31-40-15001 SPACER

905-002-003-B QUICK DISCONNECT COUPLING - GERMAN SYLE--

BRASS - ONE HAND

905-002-003-C QUICK DISCONNECT COUPLING - GERMAN SYLE--

CHROME

2202 FOSTER QUICK DISCONNECT COUPLING

915-002-078 AIR HOSE, STEEL BRAIDED, GERMAN STYLE

915-002-079 AIR HOSE, PVC, GERMAN STYLE

915-002-080 AIR HOSE, PVC, AMERICAN STYLE

915-002-081 AIR HOSE, STEEL BRAIDED, AMERICAN STYLE

915-002-082 AIR HOSE, PVC, FOSTER MALE PRONG

44B-10-379 AXLE (FOR USE WITH #229002 KNIFE & #101962 BEARING)

101962 BEARING

101963 QUICK DISCONNECT COUPLING AMERICAN STYLE

FEMALE SOCKET

934-021-158 FLAT HEAD PHILLIPS SCREW - METRIC

FIXING BOLT (PIN)

12-24 X 1-1/2 FILLISTER HEAD SCREW PRICES FOB SHIPING POINT


GERMAN STYLE 1/2” PNEUMATIC STYLE HOLDERS WITH QUCIK CLAMP OPTION

See Price List

• 716-000-572-QC

• 716-001-572-QC

• 716-002-572-QC

• 716-003-572-QC

• 716-004-572-QC

• 716-005-572-QC

• 716-006-572-QC

PARTS NUMBER GERMAN STYLE 1/2” PNEUMATIC STYLE HOLDERS PRICE - U.S. DOLLARS

QUICK CLAMP OPTION

716-000-572-QC 1/2" PNEUMATIC SCORE KNIFE ASSEMBLY, COMPLETE CALL FOR PRICING

WITH STEEL BRAIDED HOSE, GERMAN CHROME TYPE


716-001-572-QC 1/2" PNEUMATIC SCORE KNIFE ASSEMBLY, COMPLETE

WITH PVC HOSE, GERMAN CHROME TYPE COUPLING,

#793-A KNIFE & BM-001 BEARING



#229002 KNIFE & #101962 BEARING



#793-A KNIFE & #BM-001 BEARING


WITH PVC HOSE, GERMAN CHROME COUPLING, #229002

KNIFE & #101962 BEARING


WITH STEEL BRAIDED HOSE, AMERICAN TYPE



WITH PVC HOSE, FOSTER COUPLING, #793-A KNIFE,

& #BM-001 BEARING

09/20/14 PRICES FOB SHIPPING POINT

PRICES SUBJECT TO CHANGE WITHOUT NOTICE

GERMAN STYLE 1/2” PNUEMATIC STYLE HOLDERS

WITH QUICK CLAMP

PART NO. O.D. I.D. LENGTH 10501 4.000" 3.002" 8" 10502 4.000" 3.002" 9" 10503 4.000" 3.002" 10" 10504 4.000" 3.002" 11" 10505 4.000" 3.002" 12" 10506 4.000" 3.002" 13" 10507 4.000" 3.002" 14" 10508 4.000" 3.002" 15"

10510 6.250" 5.003" 8" 10511 6.250" 5.003" 9" 10512 6.250" 5.003" 10" 10513 6.250" 5.003" 11" 10514 6.250" 5.003" 12" 10515 6.250" 5.003" 13" 10516 6.250" 5.003" 14" 10517 6.250" 5.003" 15"

THE ABOVE LISTED SLEEVES COME WITH OR WITHOUT 3/8” X 3/16” KEYWAYS. SLEEVES

WITH AN O.D. OF 9.312” AND AN I.D. OF 8.253” ARE ALSO AVAILABLE. SPECIAL SIZES CAN BE MADE. PRICE AND DELIVERY AVAILABLE ON REQUEST. ALL SLEEVES ARE MADE FROM HIGH CARBON, CHROME ALLY STEEL. 63-64 R/C HARDNESS IS GUARANTEED AND THE SLEEVES MAY BE REGROUND. THE BORES AND O.D.’S ARE CONCENTRIC WITHIN .001” TIR AND THE ENDS ARE GROUND SQUARE WITH THE AXIS.

SLITTING ROLL SLEEVES

Please Call for current pricing

CUTTING EDGE SELECTIONS

BLADE REMOVAL TOOL $18.00

PO Box 2586 Shelby, NC 28151-2586 Phone: 704-482-3855 Fax: 704-471-0139 Email: [email protected]

CONVERTER SERVICES

ANNETTE TURNER

PO Box 2586 Shelby, NC 28151-2586 Fax: 704/471-0139

Phone: 704/482-3855


E-Mail: [email protected]

Layers of Service Covering All Your Needs

CONVERTER SERVICES

PAUL TURNER

PO Box 2586 Shelby, NC 28151-2586 Fax: 704/471-0139

Phone: 704/482-3855


E-Mail: [email protected]

Layers of Service Covering All Your Needs


CS Catalog No Price - Converter Servicesconverterservices.com/info/CS_Catalog.pdf · Equipment for...

Documents

Transcript of CS Catalog No Price - Converter Servicesconverterservices.com/info/CS_Catalog.pdf · Equipment for...