Crimp Specifications - Discount Hydraulic Hose Specifications Remember to always measure your...
Transcript of Crimp Specifications - Discount Hydraulic Hose Specifications Remember to always measure your...
HYDRAULIC HOSE.com®
Page 196 Customer Service: 800-535-1302 (1-215-744-2828 outside the USA) Revised 3/17
Crimp Specifications
Hose Fitting Hose I.D.
Product Code
Crimp Diameter +/- .005" (0.13 mm)
Recommended Die Set Select the die for your crimper below
Micrometer Setting
SAE 100R1AT Hydraulic Hose (R1) D100 D165 D205
Braided Hose Fittings
crimp to knurl
1/4" R1-04 0.575" (14.60 mm) D100-12MM D100-12MM D200-12MM 2.60
3/8" R1-06 0.725" (18.41 mm) D100-16MM D100-16MM D200-16MM 2.41
1/2" R1-08 0.845" (21.46 mm) D100-19MM D100-19MM D200-19MM 2.46
5/8" R1-10 0.995" (25.27 mm) D100-22MM D100-22MM D200-22MM 3.27
3/4" R1-12 1.100" (27.90 mm) D100-25MM D100-25MM D200-25MM 2.90
1" R1-16 1.430" (36.30 mm) D100-35MM D100-35MM D200-35MM 1.30
1-1/4" R1-20 1.830" (46.50 mm) N/A D100-43MM D200-43MM 3.50
W Series Bite-To-The Wire
Hose Fittingscrimp full shell
1/4" R1-04 0.655" (16.65 mm) D100-16MM D100-16MM D200-16MM 0.65
3/8" R1-06 0.790" (20.05 mm) D100-19MM D100-19MM D200-19MM 1.05
1/2" R1-08 0.920" (23.36 mm) D100-22MM D100-22MM D200-22MM 1.36
3/4" R1-12 1.215" (30.86 mm) D100-28MM D100-28MM D200-28MM 2.86
1" R1-16 1.625" (41.30 mm) D100-39MM D100-39MM D200-39MM 2.30
1-1/4" R1-20 1.965" (49.91 mm) N/A D100-47MM D200-47MM 2.91
SAE 100R2AT Hydraulic Hose (R2) D100 D165 D205
Braided Hose Fittings
crimp to knurl
1/4" R2-04 0.645" (16.38 mm) D100-16MM D100-16MM D200-16MM 0.38
3/8" R2-06 0.800" (20.32 mm) D100-19MM D100-19MM D200-19MM 1.32
1/2" R2-08 0.910" (23.10 mm) D100-22MM D100-22MM D200-22MM 1.10
5/8" R2-10 1.030" (26.16 mm) D100-25MM D100-25MM D200-25MM 1.16
3/4" R2-12 1.190" (30.25 mm) D100-28MM D100-28MM D200-28MM 2.25
1" R2-16 1.507" (38.27 mm) D100-35MM D100-35MM D200-35MM 2.27
1-1/4" R2-20 1.908" (48.46 mm) N/A D100-47MM D200-47MM 1.46
W Series Bite-To-The Wire
Hose Fittingscrimp full shell
1/4" R2-04 0.695" (17.65 mm) D100-16MM D100-16MM D200-16MM 1.65
3/8" R2-06 0.845" (21.46 mm) D100-19MM D100-19MM D200-19MM 2.48
1/2" R2-08 0.970" (24.63 mm) D100-22MM D100-22MM D200-22MM 2.63
5/8" R2-10 1.200" (30.48 mm) D100-28MM D100-28MM D200-28MM 2.48
3/4" R2-12 1.285" (32.65 mm) D100-31MM D100-31MM D200-31MM 1.65
1" R2-16 1.665" (42.30 mm) D100-41MM D100-41MM D200-41MM 1.30
1-1/4" R2-20 2.060" (52.32 mm) N/A D100-51MM D200-51MM 1.32
1-1/2" R2-24 2.400" (60.95 mm) N/A N/A D200DA-60MM* 0.95
2" R2-32 2.870" (72.90 mm) N/A N/A D200DA-72MM* 0.90
* D200DA Double-Angle Die Sets require double-angle tooling (sold separately).
D100 D165 D205See pg. 154 for our hydraulic hose crimpers.
HYDRAULIC HOSE.com®
Revised 3/17 Customer Service: 800-535-1302 (1-215-744-2828 outside the USA) Page 197
See pg. 154 for our hydraulic hose crimpers.
Crimp Specifications
Hose Fitting Hose I.D.
Product Code
Crimp Diameter +/- .005" (0.13 mm)
Recommended Die Set Select the die for your crimper below
Micrometer Setting
SAE 100R3 General Purpose/Hydraulic Hose (R3) D100 D165 D205
Braided Hose Fittings
crimp to knurl
1/4" R3-04 0.615" (15.60 mm) D100-14MM D100-14MM D200-14MM 1.60
3/8" R3-06 0.790" (20.05 mm) D100-19MM D100-19MM D200-19MM 1.05
1/2" R3-08 0.950" (24.15 mm) D100-22MM D100-22MM D200-22MM 2.15
3/4" R3-12 1.240" (31.50 mm) D100-31MM D100-31MM D200-31MM 0.50
1" R3-16 1.520" (36.60 mm) D100-35MM D100-35MM D200-35MM 1.60
SAE 100R4 Suction and Return Hose (R4) D100 D165 D205
Braided Hose Fittings
crimp to knurl
3/4" R4-12 1.233" (31.30 mm) D100-31MM D100-31MM D200-31MM 0.30
1" R4-16 1.466" (37.25 mm) D100-35MM D100-35MM D200-35MM 2.25
1-1/4" R4-20 1.780" (45.20 mm) N/A D100-43MM D200-43MM 2.20
Two-Piece Suction Hose
Fittingscrimp full shell
3/4" R4-12 1.280" (32.50 mm) D100-31MM D100-31MM D200-31MM 1.50
1" R4-16 1.540" (39.10 mm) D100-39MM D100-39MM D200-39MM 0.10
1-1/4" R4-20 1.825" (46.35 mm) N/A D100-43MM D200-43MM 3.35
1-1/2" R4-24 2.040" (51.80 mm) N/A N/A D200-51MM 0.80
2" R4-32 2.480" (63.00 mm) N/A N/A D200DA-62MM* 1.00
SAE 100R5 General Purpose/Truck Hose (R5) D100 D165 D205
R5 Series Truck Hose Fittings
crimp to knurl
3/16" R5-04 0.535" (13.60 mm) D100-12MM D100-12MM D200-12MM 1.60
1/4" R5-05 0.660" (16.75 mm) D100-16MM D100-16MM D200-16MM 0.75
5/16" R5-06 0.725" (18.40 mm) D100-16MM D100-16MM D200-16MM 2.40
13/32" R5-08 0.830" (21.10 mm) D100-19MM D100-19MM D200-19MM 2.10
1/2" R5-10 0.915" (23.30 mm) D100-22MM D100-22MM D200-22MM 1.30
5/8" R5-12 1.035" (26.30 mm) D100-25MM D100-25MM D200-25MM 1.30
7/8" R5-16 1.240" (31.50 mm) D100-29MM D100-29MM D200-29MM 2.50
1-1/8" R5-20 1.535" (38.95 mm) D100-35MM D100-35MM D200-35MM 3.95
1-3/8" R5-24 1.730" (43.95 mm) N/A D100-43MM D200-43MM 0.95
1-13/16" R5-32 2.225" (56.50 mm) N/A N/A D200DA-55MM* 1.50
SAE 100R7 Thermoplastic Hose (R7BK/R7NC) D100 D165 D205
3 Series Thermoplastic Hose Fittingscrimp to knurl
1/8" R7-02 0.358" (09.10 mm) D100-08MM D100-08MM D200-08MM 1.10
3/16" R7-03 0.478" (12.14 mm) D100-10MM D100-10MM D200-10MM 2.14
1/4" R7-04 0.555" (14.10 mm) D100-12MM D100-12MM D200-12MM 2.10
5/16" R7-05 0.630" (16.00 mm) D100-14MM D100-14MM D200-14MM 2.00
3/8" R7-06 0.675" (17.15 mm) D100-16MM D100-16MM D200-16MM 2.28
1/2" R7-08 0.825" (20.96 mm) D100-19MM D100-19MM D200-19MM 2.59
Braided Hose Fittings
crimp to knurl
3/16" R7-03 0.495" (12.57 mm) D100-10MM D100-10MM D200-10MM 2.57
1/4" R7-04 0.580" (14.73 mm) D100-12MM D100-12MM D200-12MM 2.73
5/16" R7-05 0.630" (16.00 mm) D100-14MM D100-14MM D200-14MM 2.00
3/8" R7-06 0.720" (18.28 mm) D100-16MM D100-16MM D200-16MM 4.28
1/2" R7-08 0.850" (21.59 mm) D100-19MM D100-19MM D200-19MM 2.59
3/4" R7-12 1.120" (28.44 mm) D100-28MM D100-28MM D200-28MM 0.44
1" R7-16 1.400" (35.56 mm) D100-35MM D100-35MM D200-35MM 0.56
* D200DA Double-Angle Die Sets require double-angle tooling (sold separately).
HYDRAULIC HOSE.com®
Page 198 Customer Service: 800-535-1302 (1-215-744-2828 outside the USA) Revised 3/17
Hose Fitting Hose I.D.
Product Code
Crimp Diameter +/- .005" (0.13 mm)
Recommended Die Set Select the die for your crimper below
Micrometer Setting
SAE 100R8 Thermoplastic Hose (R8BK/R8NC) D100 D165 D205
3 Series Thermoplastic Hose Fittingscrimp to knurl
3/16" R8-03 0.358" (12.14 mm) D100-10MM D100-10MM D200-10MM 2.14
1/4" R8-04 0.555" (14.10 mm) D100-12MM D100-12MM D200-12MM 2.10
5/16" R8-05 0.630" (16.00 mm) D100-14MM D100-14MM D200-14MM 2.00
3/8" R8-06 0.675" (17.15 mm) D100-16MM D100-16MM D200-16MM 1.15
1/2" R8-08 0.825" (20.96 mm) D100-19MM D100-19MM D200-19MM 1.96
Braided Hose Fittings
crimp to knurl
3/16" R8-03 0.485" (12.32 mm) D100-12MM D100-12MM D200-12MM 0.32
1/4" R8-04 0.580" (14.73 mm) D100-12MM D100-12MM D200-12MM 2.73
3/8" R8-06 0.725" (18.41 mm) D100-16MM D100-16MM D200-16MM 2.41
1/2" R8-08 0.830" (21.08 mm) D100-19MM D100-19MM D200-19MM 2.08
Pressure Washer Hose (PW/PWB) D100 D165 D205
Braided Hose Fittings
crimp to knurl
1/4"PW-04
PWB-040.560" (14.22 mm) D100-14MM D100-14MM D200-14MM 0.22
3/8"PW-06
PWB-060.750" (19.05 mm) D100-16MM D100-16MM D200-16MM 3.05
* D200DA Double-Angle Die Sets require double-angle tooling (sold separately).
Crimp Specifications
Remember to always measure your crimps!
Item: 93293-3VGA
Braided Vs. W-Series Fittings Our braided hose fittings are made to interchange with most Weatherhead "U' series fittings, and attach by crimping to the outer rubber jacket of the hose. Our W-Series bite-to-the wire fittings are designed for superior performace by biting into the steel reinforced wire of the hydraulic hoses. Finished Braided Crimp
Finished W-Series Crimp
HYDRAULIC HOSE.com®
Revised 3/17 Customer Service: 800-535-1302 (1-215-744-2828 outside the USA) Page 199
Finished W-Series Crimp
Hose Fitting Hose I.D.
Product Code
Crimp Diameter +/- .005" (0.13 mm)
Recommended Die Set Select the die for your crimper below
Micrometer Setting
SAE 100R12 Four-Wire Hydraulic Hose (R12) D100 D165 D205
W Series Bite-To-The Wire
Hose Fittingscrimp full shell
3/8" R12-06 0.870" (22.10 mm) D100-22MM D100-22MM D200-22MM 0.10
1/2" R12-08 1.010" (25.65 mm) D100-25MM D100-25MM D200-25MM 0.65
3/4" R12-12 1.320" (33.55 mm) D100-31MM D100-31MM D200-31MM 2.55
1" R12-16 1.630" (41.40 mm) D100-39MM D100-39MM D200-39MM 2.40
1-1/4" R12-20 2.045" (51.95 mm) N/A D100-51MM D200-51MM 0.95
1-1/2" R12-24 2.375" (60.35 mm) N/A N/A D200DA-60MM* 0.35
2" R12-32 2.885" (73.30 mm) N/A N/A D200DA-72MM* 1.30
SAE 100R13 Hydraulic Hose (R13) D100 D165 D205
W Series Bite-To-The Wire
Hose Fittingscrimp full shell
3/4" R13-12 1.335" (33.90 mm) D100-31MM D100-31MM D200-31MM 2.90
1" R13-16 1.645" (41.80 mm) D100-39MM D100-39MM D200-39MM 2.80
JJ Series Skived Hose
Fittingsskive before
assembly, crimp full shell
1-1/4" R13-20 2.050" (52.05 mm) N/A D100-51MM D200-51MM 1.05
1-1/2" R13-24 2.320" (58.95 mm) N/A N/A D200DA-58MM* 0.95
2" R13-32 2.980" (75.70 mm) N/A N/A D200DA-75MM* 0.70
SAE 100R14A PTFE Hose (R14) D100 D165 D205
T Series PTFE Hose Fittings
crimp to knurl
3/16" R14-04 0.395" (10.05 mm) D100-10MM D100-10MM D200-10MM 0.05
1/4" R14-05 0.430" (10.90 mm) D100-10MM D100-10MM D200-10MM 0.90
5/16" R14-06 0.490" (12.45 mm) D100-12MM D100-12MM D200-12MM 0.45
3/8" R14-07 0.565" (14.35 mm) D100-14MM D100-14MM D200-14MM 0.35
1/2" R14-10 0.695" (17.65 mm) D100-16MM D100-16MM D200-16MM 1.65
3/4" R14-14 0.995" (25.25 mm) D100-25MM D100-25MM D200-25MM 0.25
1" R14-18 1.225" (31.10 mm) D100-31MM D100-31MM D200-31MM 0.10
SAE 100R16 Hydraulic Hose (R16) D100 D165 D205
Braided Hose Fittings
crimp to knurl
1/4" R16-04 0.615" (15.60 mm) D100-14MM D100-14MM D200-14MM 1.60
3/8" R16-06 0.740" (18.79 mm) D100-16MM D100-16MM D200-16MM 2.79
1/2" R16-08 0.860" (21.84 mm) D100-19MM D100-19MM D200-19MM 2.84
5/8" R16-10 1.000" (25.40 mm) D100-25MM D100-25MM D200-25MM 0.40
3/4" R16-12 1.130" (28.70 mm) D100-28MM D100-28MM D200-28MM 0.70
1" R16-16 1.425" (36.20 mm) D100-35MM D100-35MM D200-35MM 1.20
W Series Bite-To-The Wire
Hose Fittingscrimp full shell
1/4" R16-04 0.670" (17.01 mm) D100-16MM D100-16MM D200-16MM 1.01
3/8" R16-06 0.815" (20.70 mm) D100-19MM D100-19MM D200-19MM 1.70
1/2" R16-08 0.945" (24.00 mm) D100-22MM D100-22MM D200-22MM 2.00
5/8" R16-10 1.178" (29.92 mm) D100-28MM D100-28MM D200-28MM 1.92
3/4" R16-12 1.230" (31.25 mm) D100-31MM D100-31MM D200-31MM 0.25
1" R16-16 1.555" (39.50 mm) D100-37MM D100-37MM D200-37MM 2.50
* D200DA Double-Angle Die Sets require double-angle tooling (sold separately).
Crimp Specifications
HYDRAULIC HOSE.com®
Page 200 Customer Service: 800-535-1302 (1-215-744-2828 outside the USA) Revised 3/17
Hose Fitting Hose I.D.
Product Code
Crimp Diameter +/- .005" (0.13 mm)
Recommended Die Set Select the die for your crimper below
Micrometer Setting
SAE 100R17 Hydraulic Hose (R17) D100 D165 D205
Braided Hose Fittings
crimp to knurl
1/4" R17-04 0.565" (14.35 mm) D100-14MM D100-14MM D200-14MM 0.35
3/8" R17-06 0.705" (17.90 mm) D100-16MM D100-16MM D200-16MM 1.90
1/2" R17-08 0.840" (21.35 mm) D100-19MM D100-19MM D200-19MM 2.35
5/8" R17-10 0.995" (25.27 mm) D100-25MM D100-25MM D200-25MM 0.27
3/4" R17-12 1.140" (28.95 mm) D100-28MM D100-28MM D200-28MM 0.95
W Series Bite-To-The Wire
Hose Fittingscrimp full shell
1/4" R17-04 0.625" (15.90 mm) D100-14MM D100-14MM D200-14MM 1.90
3/8" R17-06 0.779" (19.80 mm) D100-19MM D100-19MM D200-19MM 0.80
1/2" R17-08 0.950" (24.10 mm) D100-22MM D100-22MM D200-22MM 2.10
5/8" R17-10 1.170" (29.70 mm) D100-28MM D100-28MM D200-28MM 1.70
3/4" R17-12 1.275" (32.40 mm) D100-31MM D100-31MM D200-31MM 1.40
1" R17-16 1.564" (39.75 mm) D100-37MM D100-37MM D200-37MM 2.75
Hydraulax™ TOUGH Hydraulic Hose (HT) D100 D165 D205
Braided Hose Fittings
crimp to knurl
1/4" HT-04 0.600" (15.25 mm) D100-14MM D100-14MM D200-14MM 1.25
3/8" HT-06 0.750" (19.05 mm) D100-16MM D100-16MM D200-16MM 3.05
1/2" HT-08 0.860" (21.85 mm) D100-19MM D100-19MM D200-19MM 2.85
5/8" HT-10 0.985" (25.01 mm) D100-22MM D100-22MM D200-22MM 3.01
3/4" HT-12 1.151" (29.25 mm) D100-28MM D100-28MM D200-28MM 1.25
W Series Bite-To-The Wire
Hose Fittingscrimp full shell
1/4" HT-04 0.660" (16.75 mm) D100-16MM D100-16MM D200-16MM 0.75
3/8" HT-06 0.800" (20.30 mm) D100-19MM D100-19MM D200-19MM 1.30
1/2" HT-08 0.950" (24.15 mm) D100-22MM D100-22MM D200-22MM 2.15
5/8" HT-10 1.170" (29.70 mm) D100-28MM D100-28MM D200-28MM 1.70
3/4" HT-12 1.240" (31.50 mm) D100-31MM D100-31MM D200-31MM 0.50
1" HT-16 1.545" (39.25 mm) D100-37MM D100-37MM D200-37MM 2.25
10,000 PSI Hydraulic Jack Hose (HJK) D100 D165 D205Braided Hose
Fittingscrimp to knurl
1/4" HJK-04 0.634" (16.10 mm) D100-14MM D100-14MM D200-14MM 2.10
3/8" HJK-06 0.785" (19.95 mm) D100-19MM D100-19MM D200-19MM 0.95
EN 856 4SH Hydraulic Hose (4SH) D100 D165 D205
W Series Bite-To-The Wire
Hose Fittingscrimp full shell
3/4" 4SH-12 1.320" (33.55 mm) D100-31MM D100-31MM D200-31MM 2.55
1" 4SH-16 1.630" (41.40 mm) D100-39MM D100-39MM D200-39MM 2.40
1-1/4" 4SH-20 1.990" (50.55 mm) N/A D100-47MM D200-47MM 3.55
1-1/2" 4SH-24 2.390" (60.70 mm) N/A N/A D200DA-60MM* 0.70
JJ Series Skived Hose
Fittingsskive before
assembly, crimp full shell
1-1/4" 4SH-20 1.943" (49.35 mm) N/A D100-47MM D200-47MM 2.35
1-1/2" 4SH-24 2.195" (55.75 mm) N/A N/A D200DA-55MM* 0.75
2" 4SH-32 2.840" (72.15 mm) N/A N/A D200DA-72MM* 0.15
* D200DA Double-Angle Die Sets require double-angle tooling (sold separately).
Crimp Specifications
HYDRAULIC HOSE.com®
Revised 3/17 Customer Service: 800-535-1302 (1-215-744-2828 outside the USA) Page 201
Dies can be found on page 154. Hose Cutting Saws are located on page 153.
Hose Fitting Hose I.D.
Product Code
Crimp Diameter +/- .005" (0.13 mm)
Recommended Die Set Select the die for your crimper below
Micrometer Setting
SAE J2064 Type C Class II A/C Refrigerant Barrier Hose (BH) D100 D165 D205
A/C Barrier Hose Fittings
crimp to knurl
5/16" BH-06 0.684" (17.35 mm) D100-16MM D100-16MM D200-16MM 1.35
13/32" BH-08 0.785" (19.95 mm) D100-19MM D100-19MM D200-19MM 0.95
1/2" BH-10 0.905" (23.00 mm) D100-22MM D100-22MM D200-22MM 1.00
5/8" BH-12 1.050" (26.65 mm) D100-25MM D100-25MM D200-25MM 1.65
* D200DA Double-Angle Die Sets require double-angle tooling (sold separately).
Ask about our helpful and colorful wall charts for your shop or office!
Crimp Specifications
R1 SAE 100R1 AT 1-Wire Hydraulic Hose
Long-lasting cover is well suited for mobile hydraulics. Meets all SAE 100R1 AT specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
R1-04 1/4" .53" 2,750 11,000 4"
R1-06 3/8" .69" 2,250 9,000 5"
R1-08 1/2" .82" 2,000 8,000 7"
R1-10 5/8" .94" 1,500 6,000 8"
R1-12 3/4" 1.10" 1,250 5,000 9½"
R1-16 1" 1.41" 1,000 4,000 12"
Use with Braided Hose Fittings, W-Series Hose Fittings, or SAE 100R1 AT Field-Attachable Hose Fittings.
R2 SAE 100R2 AT 2-Wire Hydraulic Hose
Long-lasting cover is well suited for mobile hydraulics. Meets all SAE 100R2 AT specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
R2-04 1/4" 0.59" 5,800 psi 23,200 psi 4"
R2-06 3/8" 0.75" 4,785 psi 19,140 psi 5"
R2-08 1/2" 0.88" 4,000 psi 16,000 psi 7"
R2-10 5/8" 0.98" 3,625 psi 14,500 psi 8"
R2-12 3/4" 1.16" 3,120 psi 12,480 psi 9.5"
R2-16 1" 1.50" 2,395 psi 9,580 psi 12"
R2-20 1-1/4" 1.87" 1,815 psi 7,260 psi 16.5"
R2-24 1-1/2" 2.17" 1,305 psi 5,220 psi 20"
R2-32 2" 2.66" 1,160 psi 4,640 psi 25"
Use with Braided Hose Fittings, W-Series Hose Fittings, or SAE 100R2 AT Field-Attachable Hose Fittings.
R16 SAE 100R16 2-Wire Hydraulic Hose
Half-bend radius. Same pressure rating as SAE 100R2.Meets all SAE 100R16 specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
R16-04 1/4" 0.55" 5,800 psi 23,200 psi 2"
R16-06 3/8" 0.67" 4,780 psi 19,120 psi 2.5"
R16-08 1/2" 0.81" 3,980 psi 15,920 psi 3.5"
R16-10 5/8" 0.93" 3,620 psi 14,480 psi 4"
R16-12 3/4" 1.07" 3,110 psi 12,440 psi 4.75"
R16-16 1" 1.37" 2,390 psi 9,560 psi 6"
Use with Braided Hose Fittings or W-Series Hose Fittings.
R17 SAE100R17 Constant-Pressure Hydraulic Hose
Half-bend radius. All sizes are rated for 3,000 psi maximum working pressure.Meets all SAE 100R17 specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
R17-04* 1/4" 0.50" 3,000 12,000 2"
R17-06* 3/8" 0.66" 3,000 12,000 2½"
R17-08 1/2" 0.80" 3,000 12,000 3½"
R17-10 5/8" 1.00" 3,000 12,000 4"
R17-12 3/4" 1.12" 3,000 12,000 4¾"
R17-16 1" 1.48" 3,000 12,000 6"
Use with Braided Hose Fittings (up to 3/4" hose I.D.) or W-Series Hose Fittings (all sizes). *One-Wire spiral braid in sizes -04 and -06
HJK 10,000 psi Hydraulic Jack Hose
Use only in constant pressure (no impulse) applications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
HJK-04 1/4" 0.59" 10,000 20,000 4"
HJK-06 3/8" 0.75" 10,000 20,000 7"
Use with Braided Hose Fittings.
HT Tough-Cover Hydraulic Hose
Abrasion-, ozone- and weather-resistant cover is ideal for mobile hydraulics in harsh environments.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
HT-04 1/4" 0.53" 6,525 26,100 1.8"
HT-06 3/8" 0.68" 5,585 22,340 2.8"
HT-08 1/2" 0.81" 5,000 20,000 3.5"
HT-10 5/8" 0.93" 4,205 16,820 5.1"
HT-12 3/4" 1.09" 4,060 16,240 6.3"
HT-16 1" 1.40" 2,900 11,600 8.27"
Use with Braided Hose Fittings or W-Series Hose Fittings.
R12 SAE 100R12 4-Wire Hydraulic Hose
Long-lasting cover is well suited for mobile hydraulics. Meets all SAE 100R12 specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
R12-06 3/8" 0.80" 4,000 16,000 5"
R12-08 1/2" 0.94" 4,000 16,000 7"
R12-12 3/4" 1.21" 4,000 16,000 9½"
R12-16 1" 1.50" 4,000 16,000 12"
R12-20 1¼" 1.85" 3,000 12,000 16½"
R12-24 1½" 2.11" 2,500 10,000 20"
R12-32 2" 2.63" 2,500 10,000 25"
Use with W-Series Hose Fittings.
4SH DIN EN 856 4SH 4-Wire Hydraulic Hose
Six-wire performance with no-skive fittings. Meets all DIN 20023 4SH and DIN EN 856 4SH specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
4SH-12 3/4" 1.21" 6,095 24,380 9½"
4SH-16 1" 1.50" 5,515 22,060 12"
4SH-20 1¼" 1.85" 5,000 20,000 16½"
4SH-24 1½" 2.11" 4,200 16,800 20"
4SH-32 2" 2.63" 3,625 14,500 25"
Use with W-Series Hose Fittings (up to 1-1/2" hose I.D.) or JJ-Series Hose Fittings (1-1/4" to 2" hose I.D.).
R13 SAE 100R13 6-Wire Hydraulic Hose
Long-lasting cover is well suited for mobile hydraulics. Meets all SAE 100R13 specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
R13-12* 3/4" 1.26" 5,000 20,000 9½"
R13-16* 1" 1.54" 5,000 20,000 12"
R13-20 1¼" 1.96" 5,000 20,000 16½"
R13-24 1½" 2.26" 5,000 20,000 20"
R13-32 2" 2.8" 5,000 20,000 25"
Use with JJ-Series Hose Fittings (skiving is required). *Four-wire spiral braid in sizes -12 and -16
R4 SAE 100R4 Suction and Return Hose
Suitable for vacuum service up to 25"/hg.Meets all SAE 100R4 specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
R4-12 3/4" 1.24" 300 1,200 5"
R4-16 1" 1.53" 250 1,000 6"
R4-20 1¼" 1.78" 200 800 8"
R4-24 1½" 2.07" 150 600 10"
R4-32 2" 2.54" 100 400 12"
Use with Suction Hose Fittings or Steel Hose Barbs. Attach barbs with Heavy Duty T-Bolt Hose Clamps.
1145 Heavy-Duty Air HoseRecommended for air and water applications where petroleum contact is limited.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
1145-04400 1/4" 0.63" 300 1,200 3"1145-05400 5/16" 0.63" 300 1,200 3¼"1145-06400 3/8" 0.72" 300 1,200 3¼"1145-08400 1/2" 0.88" 300 1,200 4½"1145-10400 5/8" 1.00" 300 1,200 5¼"1145-12400 3/4" 1.16" 300 1,200 5¾"1145-16300 1" 1.44" 200 800 7¾"1145-20200 1¼" 1.78" 200 800 8¾"1145-24200 1½" 2.03" 200 800 10½"1145-32200 2" 2.50" 200 800 14"
Use with Brass Hose Barbs. Attach with hose clamps or ferrules.
K11 PVC Multipurpose Air and Water Hose
Recommended for air, water, and mild water-soluble chemicals. Available in red, blue, gray and yellow.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi) at 70° Fahrenheit
Max. Working Pressure (psi) at 122° Fahrenheit
K1134-04 1/4" 0.50" 300 180
K1134-05 5/16" 0.63" 300 180
K1134-06 3/8" 0.63" 300 180
K1134-08 1/2" 0.81" 300 180
K1134-10 5/8" 0.91" 300 180
K1134-12 3/4" 1.13" 300 180
K1134-16 1" 1.41" 300 180
Use with Brass Hose Barbs or Nylon Hose Barbs. Attach with hose clamps or ferrules.
3384 Push-Lock General Purpose Hose
Recommended for gasoline, fuel and lubricating oils, air and water. Available in black, blue, gray, red and yellow.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
3384-04 1/4" 0.50" 250 1,000 3"
3384-06 3/8" 0.62" 250 1,000 3"
3384-08 1/2" 0.75" 250 1,000 5"
3384-10 5/8" 0.91" 250 1,000 6"
3384-12 3/4" 1.03" 250 1,000 7"
No hose clamps or ferrules needed when used with Push-Lock Hose Barbs.
R3 SAE 100R3 General Purpose Hose
Recommended for hydraulics, fuel, lubricating oils, gasoline, air and water. Not approved for air brake.Meets all SAE 100R3 specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
R3-04 1/4" 0.57" 1,250 5,000 3"
R3-06 3/8" 0.75" 1,125 4,500 4"
R3-08 1/2" 0.94" 1,000 4,000 5"
R3-12 3/4" 1.25" 750 3,000 6"
R3-16 1" 1.50" 565 2,250 8"
Use with Braided Hose Fittings.
R6 SAE 100R6 General Purpose Hose
Recommended for gasoline, fuel, lubricating oils, air and water. Not approved for air brake applications.Meets all SAE 100R6 specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
R6-04 1/4" .50" 400 1,600 2½"
R6-05 5/16" .57" 400 1,600 3"
R6-06 3/8" .63" 400 1,600 3"
Use with SAE 100R6 Field-Attachable Fittings.
R5 SAE 100R5 1-Wire Braided Cover Hose
Recommended for hydraulics, air, air brake, gasoline, fuel, and lubricating oils. SAE 100R5 is not Coast Guard approved for fuel lines on pleasure craft. Meets all applicable SAE 100R5, DOT and SAE J1402 specifications (7/8" and larger are not approved for air brake).
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
R5-04 3/16" 0.51" 3,000 12,000 3"
R5-05 1/4" 0.57" 3,000 12,000 3½"
R5-06 5/16" 0.67" 2,250 9,000 4"
R5-08 13/32" 0.76" 2,000 8,000 4½"
R5-10 1/2" 0.92" 1,750 7,000 5½"
R5-12 5/8" 1.07" 1,500 6,000 6½"
R5-16 7/8" 1.23" 800 3,200 7½"
R5-20 11/8" 1.50" 625 2,500 9"
R5-24 13/8" 1.75" 500 2,000 10½"
R5-32 113/16" 2.10" 350 1,400 13¼"
Use with Truck Hose Fittings or R5 Field-Attachable Hose Fittings.
4821 SAE J1402A Air Brake Hose
Recommended for air brake applications.Meets all SAE J1402A and DOT specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
482106 3/8" 0.75" 225 900 3.5"
482108 1/2" 0.88" 225 900 4"
Use with Field-Attachable Air Brake Hose Fittings.
30R7 SAE 30R7 Fuel Line Hose
Recommended for low pressure / high temperature fuel for passenger car, light truck and small engine applica-tions. Not intended for fuel injection applications. Meets all requirements of SAE 30R7. 30R7 is not Coast Guard approved for marine applications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
30R7-03 3/16" .41" 50 250 2"
30R7-04 1/4" .50" 50 250 2½"
30R7-05 5/16" .57" 50 250 2¾"
30R7-06 3/8" .63" 50 250 3"
Use with SAE 30R7 Fuel Hose Barbs.
BH Air Conditioning/Refrigerant Hose
Recommended for use with R12 and R134a refrigerant. Ideal for heavy-duty truck use as well as industrial and automotive applications.
Meets all requirements for SAE J2064 Type C Class II.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
BH-06 5/16" .75" 350 2,000 4"
BH-08 13/32" .91" 350 2,000 4¾"
BH-10 1/2" 1.00" 350 2,000 5½"
BH-12 5/8" 1.13" 350 1,750 6½"
Use with Air Conditioning Hose Fittings.
Pressure Washer Hose
Recommened for pressure washer applications. Avail-able in Black (PW) and non-marking Blue cover (PWB)
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
PW-06 3/8" .65" 4,000 16,000 3"
PWB-06 3/8" .65" 4,000 16,000 3"
Use with Braided Hose Fittings.
R7 SAE 100R7 Nylon/ Thermoplastic Hose
Single-wire performance without the wire. Smooth cover. Recommended for hydraulic lines, lubrication, medium pressure gas and solvent. Available in black or nonconductive orange.
1/4", 3/8" and 1/2" also available in a twin hose.Meets all SAE 100R7 specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
R7-02 1/8" 0.33" 2,500 10,000 0.25"R7-03 3/16" 0.41" 3,000 12,000 0.75"R7-04 1/4" 0.51" 2,750 11,000 1.25"R7-05 5/16" 0.59" 2,500 10,000 1.75"R7-06 3/8" 0.65" 2,250 9,000 2.00"R7-08 1/2" 0.81" 2,000 8,000 3.00"
Use with 3-Series Thermoplastic Hose Fittings or R7 Field-Attachable Hose Fittings.
R8 SAE 100R8 Nylon/ Thermoplastic Hose
Double-wire performance without the wire. Smooth cover. Recommended for hydraulic lines, lubrication, medium pressure gas and solvent. Available in black or nonconductive orange. Meets all SAE 100R8 specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
R8-04 1/4" 0.51" 5,000 20,000 2"
R8-06 3/8" 0.65" 4,000 16,000 2½"
R8-08 1/2" 0.81" 3,500 14,000 4"
Use with 3-Series Thermoplastic Hose Fittings or R7 Field-Attachable Hose Fittings.
R14 SAE 100R14A Teflon®/PTFE Hose
Recommended for steam, solvents, fuels, hydraulic fluids, most chemicals and acids.Meets all SAE 100R14A specifications.
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
R14-04 3/16" .30" 3,000 12,000 2"
R14-05 1/4" .38" 3,000 12,000 3"
R14-06 5/16" .44" 2,500 10,000 4"
R14-07 3/8" .52" 2,000 8,000 5"
R14-08 13/32" .54" 2,000 8,000 5"
R14-10 1/2" .63" 1,500 6,000 6½"
R14-12 5/8" .76" 1,200 4,800 7½"
R14-14 3/4" .89" 1,000 4,000 8½"
R14-16 7/8" 1.03" 1,000 4,000 9"
R14-18 1" 1.22" 1,000 4,000 12"
Use with T-Series Teflon Hose Fittings or SAE 100R14A Field-Attachable Hose Fittings.
Nylon Air Brake Tubing
Recommended for steam, solvents, fuels, hydraulic fluids, most chemicals and acids. Available in 9 colors shown below.Meets all requirements for SAE J844 Type A & B and DOT FMVSS 571.106
Item Number
Inside Diameter
Outside Diameter
Max. Working Pressure (psi)
Min. Burst Pressure (psi)
Minimum Bend Radius
NT100-02BK 1/8" .023" 150 psi 1,000 psi 3/8"
NT100-04BK 1/4" .040" 150 psi 1,200 psi 1"
NT100-05BK 5/16" .040" 150 psi 1,000 psi 1-1/4"
NT100-06BK 3/8" .062" 150 psi 1,400 psi 1-1/2"
NT100-08BK 1/2" .062" 150 psi 950 psi 2"
NT100-10BK 5/8" .092" 150 psi 900 psi 2-1/2"
NT100-12BK 3/4" .092" 150 psi 800 psi 3"
Use with Air Brake Fittings or Push-In Air Brake Fittings.
HA Hose Armor Protective Steel Coil
BE Standard Support Clamp for Hose, Tubing or Pipe
BE-T Twin Support Clamp for Hose, Tubing or Pipe
COV Steel Hose Strap with Protective Rubber Cover
HHP112 Flexible Neoprene Protective Hose Wrap
BE-H Heavy-Duty Support Clamp for Hose, Tubing or Pipe
Hose Protection and Support ClampsNPS Nylon Protective Sleeve
SG Steel Wire Protective Coil
HB Hose-Bend Restrictors
Fire Jacket Protective Wrap for temperatures up to 500° F
Fire Jacket Protective Sleeve for temperatures up to 500° F
HOSE, TUBING AND ACCESSORIESHYDRAULAPRODUC T S
©2007-2015 Hydraulic Fittings Company, Inc. Printed in the U.S.A.
NFSGX Spiral Guard UV-Resistant Plastic Protective Coil
600 Series ISO 7241-1 Series AInterchanges with Parker 6600 Series
4100 Series Wet Line CouplingInterchanges with Parker 6100 Series
700 Series ISO 7241-1 Series BInterchanges with Parker 60 Series
Hydraulic Quick Disconnect CouplersAG Series ISO 5675 AgriculturalInterchanges with Parker/Pioneer 4000 Series
T Series Screw-Together High PressureInterchanges with Parker 3000 Series and Enerpac C604 (3/8" only)
HT Series ISO 16028 Flush-FaceInterchanges with Parker FEM Series (1/2", 5/8" and 3/4") and FF Series (3/8" only).
HYDRAULIC (with petroleum or water-based fluids) GENERAL PURPOSE TRUCK/FLEET SPECIAL APPLICATIONS
Fluid Conducting Swivel Joints18S Series Pressure Balanced Parallel Plane Swivels
9S Series Pressure Balanced 90° Swivels
9SS Series Dual-Plane 90° Swivels
Full-time 360° rotating swivel joints for fluid power applications up to 3,000 psi working pressure.
S Series Full Flow In-Line Swivels
HYDRAULAPRODUC T S
2 LOCATIONS TO SERVE YOU 5606 Tulip St Philadelphia, PA 19124215-744-2828
6360 Basehore RdMechanicsburg, PA 17050 717-691-3171
HOSE ASSEMBLY TOOLSHydraulax Products has a full selection of tools for crimping, swaging, and cutting hose.
Always measure your crimpsPermanently-attached hose fittings must be crimped to manufacturer specifications. For complete crimp specification data, please see our catalog or visit www.hydraulax.com.
93293-3VGA 6" Digital Caliper
For additional hose information, including temperature range, outside diameter and reel lengths, please see our catalog or visit www.hydraulax.com
NT
PW
FPX (W) NPSM Female Pipe Swivel
FKOMX (W) Komatsu JIS 30° (Metric Thread) Female Swivel
3-00100 NPTF Male Pipe Rigid
3-00140 NPTF Male Pipe Swivel
3-00240 NPSM Female Pipe Swivel
3-00400 O-Ring Face Seal (ORFS) Female Swivel
3-00470 O-Ring Face Seal (ORFS) Female Swivel 90° Elbow
Braided Hose Fittings for 1-Wire and 2-Wire Hoses
MJ JIC 37° Male Rigid Also available in Stainless Steel
FJX JIC 37° Female Swivel Also available in Stainless Steel
FJXT JIC 37° Female Swivel Long
MP NPTF Male Pipe Rigid Also available in Stainless Steel
MPX NPTF Male Pipe Swivel
FP NPTF Female Pipe Rigid
FPX NPSM Female Pipe Swivel
MB O-Ring Boss Male Rigid
MBX O-Ring Boss Male Swivel
MF O-Ring Face Seal Male Rigid
FFXT O-Ring Face Seal Female Swivel Long
FFX O-Ring Face Seal Female Swivel
MS SAE 45° Male Rigid
FSXT SAE 45° Female Swivel Long
FSX SAE 45° Female Swivel
MBSPT British Standard Pipe Taper Male Rigid
MBSPP British Standard Pipe Parallel Male Rigid
FBSPX British Standard Pipe Parallel Female Swivel
FBFPX British Flat Face Female Swivel
C61 Code 61 Flange (3,000 psi)
SHELL Crimp Shell Only
MT Flareless Compression Male (includes nut and sleeve)
GT Grease Trap Female
KAR Karcher Pressure Wash
FW Female Weld Fitting
MW North American Stand Tube
MMSP Metric Stand Tube
MDL DIN Light Universal Seat Male Rigid (Metric)
FDINLX DIN Light Universal Seat Female Swivel (Metric)
MDH DIN Heavy Universal Seat Male Rigid (Metric)
FDINHX DIN Heavy Universal Seat Female Swivel (Metric)
FJISX JIS 30° (BSPP thread) Female Swivel
FKOMX Komatsu JIS 30° (Metric Thread) Female Swivel
MIX Inverted Flare Male Swivel
FJX45 JIC 37° Female Swivel 45° Elbow
FFX45 O-Ring Face Seal Female Swivel 45° Elbow
FSX45 SAE 45° Female Swivel 45° Elbow
FBSPX45 British Standard Pipe Parallel Female Swivel 45° Elbow
C6145 Code 61 Flange (3,000 psi) 45° Elbow
MIX45 Inverted Flare Male Swivel 45° Elbow
FDINLX45 DIN Light Universal Seat Female Swivel 45° (Metric)
FDINHX45 DIN Heavy Universal Seat Female Swivel 45° (Metric)
MMSP45 Metric Stand Tube 45° Elbow
FJX90 JIC 37° Female Swivel 90° Elbow Also available in Stainless Steel
FJX90B JIC 37° Female Swivel Block Style 90° Elbow
FFX90L O-Ring Face Seal Female Swivel Long Drop 90° Elbow
FSX90 SAE 45° Female Swivel 90° Elbow
FBSPX90 British Standard Pipe Parallel Female Swivel 90° Elbow
FBSPX90B British Standard Pipe Parallel Female Swivel Block Style 90°
MIX90 Inverted Flare Male Swivel 90° Elbow
FDINLX90 DIN Light Universal Seat Female Swivel 90° (Metric)
FDINHX90 DIN Heavy Universal Seat Female Swivel 90° (Metric)
MMSP90 Metric Stand Tube 90° Elbow
FJX90L JIC 37° Female Swivel Long Drop 90° Elbow
FFX90 O-Ring Face Seal Female Swivel 90° Elbow
FFX90M O-Ring Face Seal Female Swivel Medium Drop 90° Elbow
MPX90 NPTF Male Pipe Swivel 90° Elbow
MBX90 O-Ring Boss Male Swivel 90° Elbow
W-Series Hose Fittings for 4-Wire Spiral Hoses
MENDER Hose Mender
C6190 Code 61 Flange (3,000 psi) 90° Elbow
MJ (W) JIC 37° Male Rigid
FJX (W) JIC 37° Female Swivel Also available in Stainless Steel
MP (W) NPTF Male Pipe Rigid Also available in Stainless Steel
MPX (W) NPTF Male Pipe Swivel
MB (W) O-Ring Boss Male Rigid
MBX (W) O-Ring Boss Male Swivel
FFX (W) O-Ring Face Seal Female Swivel
FSX (W) SAE 45° Female Swivel
MENDER (W) Hose Mender
MT (W) Flareless Compression Male (includes nut and sleeve)
FBSPX (W) British Standard Pipe Parallel Female Swivel
FJISX (W) JIS 30° (BSPP thread) Female Swivel
MDL (W) DIN Light Universal Seat Male Rigid (Metric)
FDL (W) DIN Light Universal Seat Female Swivel (Metric)
MBSPP (W) British Standard Pipe Parallel Male Rigid
C61 (W) Code 61 Flange (3,000 psi)
GT (W) Grease Trap Female
FW (W) Female Weld Fitting
C62 (W) Code 62 Flange (6,000 psi)
CAT (W) Caterpillar Flange
FJX45 (W) JIC 37° Female Swivel 45° Elbow
FFX45 (W) O-Ring Face Seal Female Swivel 45° Elbow
FBSPX45 (W) British Standard Pipe Parallel Female Swivel 45° Elbow
MIX45 (W) Inverted Flare Male Swivel 45° Elbow
MIX (W) Inverted Flare Male Swivel
FDL45 (W) DIN Light Universal Seat Female Swivel 45° (Metric)
FDH45 (W) DIN Heavy Universal Seat Female Swivel 45° (Metric)
CAT45 (W) Caterpillar Flange 45° Elbow
C6122 (W) Code 61 Flange (3,000 psi) 22° Elbow
C6130 (W) Code 61 Flange (3,000 psi) 30° Elbow
C6160 (W) Code 61 Flange (3,000 psi) 60° Elbow
C6260 (W) Code 62 Flange (6,000 psi) 60° Elbow
C6190 (W) Code 61 Flange (3,000 psi) 90° Elbow
C6190L (W) Code 61 Flange (3,000 psi) 90° Elbow
C6222 (W) Code 62 Flange (6,000 psi) 22° Elbow
C6230 (W) Code 62 Flange (6,000 psi) 30° Elbow
C6245 (W) Code 62 Flange (6,000 psi) 45° Elbow
C6145 (W) Code 61 Flange (6,000 psi) 45° Elbow
C6290 (W) Code 62 Flange (6,000 psi) 90° Elbow
CAT90 (W) Caterpillar Flange 90° Elbow
FJX90L (W) JIC 37° Female Swivel Long Drop 90° Elbow
FDH90 (W) DIN Heavy Universal Seat Female Swivel 90° (Metric)
FFX90 (W) O-Ring Face Seal Female Swivel 90° Elbow
FBSPX90 (W) British Standard Pipe Parallel Female Swivel 90° Elbow
FJX90 (W) JIC 37° Female Swivel 90° Elbow
FDL90 (W) DIN Light Universal Seat Female Swivel 90° (Metric)
FFX90M (W) O-Ring Face Seal Female Swivel Medium Drop 90° Elbow
FFX90L (W) O-Ring Face Seal Female Swivel Long Drop 90° Elbow
3-Series Thermoplastic Hose Fittings 3-00500 JIC 37° Male Rigid
3-00540 JIC 37° Female Swivel
3-00600 JIC 37° Female Swivel 45° Elbow
3-00640 JIC 37° Female Swivel 90° Elbow
3-00840 JIC 37° Female Swivel Long Drop 90° Elbow
3-00A00 SAE 45° Female Swivel
T01 NPTF Male Pipe Rigid
T-Series Hose Fittings are interchangeable with Weatherhead E Series hose fittings.
Use with SAE 100R14A Teflon/PTFE Hoses.
T04 NPTF Male Pipe Swivel
T07 SAE 45° Female Swivel
T30 O-Ring Face Seal (ORFS) Female Swivel
T18 Inverted Flare Male Swivel
T10 British Standard Pipe Parallel Female Swivel
T32 O-Ring Face Seal (ORFS) Female Swivel 90° Elbow
T-Series Teflon®/PTFE Hose Fittings T08 JIC 37° Male Rigid
T09 JIC 37° Female Swivel
T31 O-Ring Face Seal (ORFS) Female Swivel 45° Elbow
T19 Inverted Flare Male Swivel 45° Elbow
T25 JIC 37° /SAE 45° Dual Seat Female Swivel 45° Elbow
T26 JIC 37° /SAE 45° Dual Seat Female Swivel 90° Elbow
T23 SAE 45° Female Swivel 90° Elbow
T27 JIC 37° /SAE 45° Dual Seat Female Swivel 90° Long Elbow
T33 O-Ring Face Seal (ORFS) Female Swivel 90° Long Elbow
HES NPTF Male Pipe Expander
4404 NPTF Male Pipe (Beaded Hose Barb)
4501 NPTF Male Pipe 90° Elbow (Beaded Hose Barb)
4503 NPTF Male Pipe 45° Elbow (Beaded Hose Barb)
4601 O-Ring Boss 90° Elbow (Beaded Hose Barb)
4603 O-Ring Boss 45° Elbow (Beaded Hose Barb)
4604 O-Ring Boss (Beaded Hose Barb)
Steel Hose Barbs for SAE 100R4 Suction & Return Hose HAS NPTF Male Pipe
HRS NPTF Male Pipe Reducer
HAPS NPTF Male Pipe (Plated)
HCPS Hose Mender (Plated)
O-Ring Male BL-TMS Series
Insert O-Ring BL-MOR Series
Compression RepairBL-MV Series
Beadlock A/C Hose Fittings
TBC Heavy-Duty T-Bolt Hose Clamp
HYDRAULIC HOSE FITTINGS
LF Flareless Compression Female Swivel
T20 Inverted Flare Male Swivel 90° Elbow
FJX90M JIC 37° Female Swivel Medium Drop 90° Elbow
R2-00-100 NPTF Male Pipe Also available in Stainless Steel
R2-00-660 JIC 37° Female Swivel 90° Elbow
R2-00-600 JIC 37° Female Swivel Also available in Stainless Steel
R2-00-680 JIC 37° Female Swivel 45° Elbow
R2-00-500 JIC 37° Male Rigid
R2 Field-Attachable Hose Fittings
MPX90 (W) NPTF Male Pipe Swivel 90° Elbow
MIX90 (W) Inverted Flare Male Swivel 90° Elbow
MBX90 (W) O-Ring Boss Male Swivel 90° Elbow
MF (W) O-Ring Face Seal Male Rigid
FP (W) NPTF Female Pipe Rigid
MDH (W) DIN Heavy Universal Seat Male Rigid (Metric)
FDH (W) DIN Heavy Universal Seat Female Swivel (Metric)
HYDRAULAPRODUC T S
3-Series Hose Fittings are interchangeable with Synflex 3903 Series hose fittings.
Use with all SAE 100R7 or SAE 100R8 Thermoplastic Hoses.
R2 Field-Attachable Hose Fittings are reusable and and can be assembled with hand tools (a hose crimper is not required).
Use with SAE 100R2AT hydraulic hose only.
Braided Hose Fittings are interchangeable with Weatherhead U Series, Dayco-Eastman HY Series, Aeroquip FJ Series, Imperial-Eastman HU Series and Dayco SB Series hose fittings.
Use with the following hydraulic hoses: Hydraulax Tough (HT), HJK Jack Hose, SAE 100R1AT, SAE 100R2AT, SAE 100R3, SAE 100R16, and SAE 100R17.
W-Series Hose Fittings feature Bite-To-The Wire performance at an affordable cost.
Recommended for use with 4-wire SAE 100R12 and DIN 20023 4SH hydraulic hoses.
May also be used with HJK Jack Hose, Hydraulax Tough (HT), as well as SAE 100R1AT, 100R2AT, 100R16 and 100R17 hoses.
Braze-On BL-BR Series
O-Ring Female BL-TFS Series
Mender BL-RM Series
©2007-2016 Hydraulax Products Printed in the U.S.A.
HYDRAULAPRODUC T S
2 locations to serve you!
Philadelphia: 215-744-28285606 Tulip St, Philadelphia PA 19124
Mechanicsburg: 717-691-3171
6360 Basehore Rd, Mechanicsburg, PA 17050
HOSE ASSEMBLY TOOLSHydraulax Products has a full selection of tools for crimping, swaging, and cutting hose.
Always measure your crimpsPermanently-attached hose fittings must be crimped to manufacturer specifications. For complete crimp specification data, please see our catalog or visit www.hydraulax.com.
93293-3VGA 6" Digital Caliper
HOSE PROTECTIONWe carry many products to extend the service life of your hydraulic hoses, such as Nylon Protective Sleeving (NPS), Steel and Plastic Hose Guard, and more.
Visit our website for crimp specifications www.hydraulax.com
STEEL FITTINGS & ADAPTERSHYDRAULAPRODUC T S
18S Series Pressure Balanced Parallel Plane Swivels
9S Series Pressure Balanced 90° Swivels
9SS Series Dual-Plane 90° Swivels
S Series Full Flow In-Line Swivels
Fluid Conducting Swivel Joints
4000 Buna O-Ring for Straight Thread
Straight Thread O-Ring Boss (ORB)6400 Male JIC x O-Ring Boss
6400L Male JIC x O-Ring Boss Long
6401 O-Ring Boss x Male NPTF
6402 O-Ring Boss x JIC 37° Female Swivel
6403 O-Ring Boss Union
6404 Female O-Ring Boss x Male NPTF
6405 O-Ring Boss x Female NPTF
6407 O-Ring Boss Adjustable Union
6408 O-Ring Boss Hex Head Plug
6409 O-Ring Boss Hex Socket Plug
6410 O-Ring Boss Reducer/Expander
6801 Male JIC x O-Ring Boss 90° Elbow
6801L Male JIC x O-Ring Boss 90° Long Elbow
6801LL Male JIC x O-Ring Boss 90° Extra Long Elbow
6802 Male JIC x O-Ring Boss 45° Elbow
6803 JIC 37° x O-Ring Boss Branch Tee
6804 Male JIC x O-Ring Boss Run Tee
6805 O-Ring Boss x Female NPTF 90° Elbow
6805LL O-Ring Boss x Female NPTF 90° Extra Long Elbow
6806 O-Ring Boss x Male NPTF 90° Elbow
6807 O-Ring Boss 90° Male Elbow
6809 O-Ring Boss x Female JIC Swivel 90° Elbow
6815 O-Ring Boss x Female O-Ring Boss 90° Elbow
6900 O-Ring Boss x Female NPSM Swivel
6901 O-Ring Boss x Female NPSM Swivel 90° Elbow
6902 O-Ring Boss x Female NPSM Swivel 45° Elbow
Teflon® (PTFE) Thread Sealing Paste
Teflon® (PTFE) Thread Sealing Tape
459 Seal Nut for Male Pipe (NPTF)
1404 Male NPTF x Female NPSM Swivel
1405 Female NPTF x Female NPSM Swivel
1406 Female NPSM Swivel Union
1501 Male NPTF x Female NPSM Swivel 90° Elbow
1501L Male NPTF x Female NPSM Swivel 90° Long Elbow
61SF Code 61 Split Flange Half
Dash Size
Tube/Pipe Size
Pipe Thread (NPTF/NPSM) JIC 37° Flare O-Ring Boss
(ORB)O-Ring Face
Seal (OFS)Flareless
Compression
-02 1⁄8" 1⁄8 – 27 5⁄16 – 24 5⁄16 – 24 5⁄16 – 24-03 3⁄16" 3⁄8 – 24 3⁄8 – 24 3⁄8 – 24-04 1⁄4" 1⁄4 – 18 7⁄16 – 20 7⁄16 – 20 9⁄16 – 18 7⁄16 – 20-05 5⁄16" 1⁄2 – 20 1⁄2 – 20 1⁄2 – 20-06 3⁄8" 3⁄8 – 18 9⁄16 – 18 9⁄16 – 18 11⁄16 – 16 9⁄16 – 18-08 1⁄2" 1⁄2 – 14 3⁄4 – 16 3⁄4 – 16 13⁄16 – 16 3⁄4 – 16-10 5⁄8" 7⁄8 – 14 7⁄8 – 14 1– 14 7⁄8 – 14-12 3⁄4" 3⁄4 – 14 11⁄16 – 12 11⁄16 – 12 13⁄16 – 12 11⁄16 – 12-14 7⁄8" 13⁄16 – 12 13⁄16 – 12 13⁄16 – 12-16 1" 1– 111⁄2 15⁄16 – 12 15⁄16 – 12 17⁄16 – 12 15⁄16 – 12-20 11⁄4" 11⁄4 – 111⁄2 15⁄8 – 12 15⁄8 – 12 111⁄16 – 12 15⁄8 – 12-24 11⁄2" 11⁄2 – 111⁄2 17⁄8 – 12 17⁄8 – 12 2 – 12 17⁄8 – 12-32 2" 2 – 111⁄2 21⁄2 – 12 21⁄2 – 12 21⁄2 – 12
JIC 37° Flare Tube Fittings Pipe Fittings (NPTF & NPSM)
Four-Bolt Flanges
600 Series ISO 7241-1 Series A
Interchanges with Parker 6600 Series
Hydraulic Quick Disconnects
302 JIC 37° Short Flare Nut
304 JIC 37° Long Flare Nut
304C JIC 37° Flare Tube Cap
306 JIC 37° Bulkhead Locknut
318 JIC 37° Tube Nut (requires tube sleeve)
319 JIC 37° Tube Sleeve (requires tube nut)
418 Convert-A-Flare Tube Nut (JIC 37° to Flareless)
419 Convert-A-Flare Tube Sleeve (JIC to Flareless)
2403 JIC 37° Tube Union
2403LH Large Hex JIC 37° Tube Union
2404 Male JIC x Male NPTF
2404L Male JIC x Male NPTF Long
2404LL Male JIC x Male NPTF Extra Long
2405 Male JIC x Female NPTF
2406 JIC 37° Tube Reducer/Enlarger
2408 JIC 37° Tube Plug
2500 JIC 37° Tube Union 90° Elbow
2501 Male JIC x Male NPTF 90° Elbow
2501L Male JIC x Male NPTF 90° Long Elbow
2501LL Male JIC x Male NPTF 90° Double Long Elbow
2501LLL Male JIC x Male NPTF 90° Triple Long Elbow
MTS JIC 37° Tube Sleeve for Metric Tubing
2502 Male JIC x Female NPTF 90° Elbow
2503 Male JIC x Male NPTF 45° Elbow
2504 JIC Tube Union 45° Elbow
2505 Male JIC x Female NPTF 45° Elbow
2601 Male JIC x Male NPTF Branch Tee
2602 Male JIC x Female NPTF Branch Tee
2603 JIC 37° Tube Union Tee
2605 Male JIC x Male NPTF Run Tee
2606 Male JIC x Female NPTF Run Tee
2607 Male JIC x Male NPTF x Male NPTF Tee
2611 Male JIC x Male NPTF x Female NPTF Tee
2613 Male NPTF x Female NPTF x Male JIC Tee
2650 JIC Tube Union Cross
2700LN JIC 37° Bulkhead Union with Locknut
2701LN JIC 37° Bulkhead Union 90° Elbow with Locknut
2702LN JIC 37° Bulkhead Union 45° Elbow with Locknut
2703LN JIC 37° Bulkhead Branch Tee with Locknut
2704LN JIC 37° Bulkhead Run Tee with Locknut
2705LN Female NPTF x JIC 37° Bulkhead with Locknut
2706LN Male NPTF x JIC Bulkhead with Locknut
6500 Male JIC x Female JIC Swivel 90° Elbow
6500BT Male JIC x Female JIC Swivel Bent Tube Elbow
6501 Male NPTF x Female JIC Swivel 90° Elbow
6502 Male JIC x Female JIC Swivel 45° Elbow
6503 Female JIC Swivel x Female NPTF 90° Elbow
6504 Male JIC x Female JIC Swivel Adapter
6505 Male NPTF x Female JIC Swivel
6506 Female NPTF x Female JIC Swivel
6565 Female JIC Swivel Union
6600 Male JIC x Female JIC Swivel Branch Tee
6602 Male JIC x Female JIC Swivel Run Tee
41157 Male JIC x O-Ring Port Adapter
1502 Female NPTF x Female NPSM Swivel 90° Elbow
1503 Male NPTF x Female NPSM Swivel 45° Elbow
1504 Female NPTF x Female NPSM Swivel 45° Elbow
1601 Male NPTF x Female NPSM Swivel Branch Tee
1602 Female NPTF x Female NPSM Swivel Branch Tee
1603 Female NPSM Swivel Tee
5000 Female Pipe (NPTF) Coupling
5404 Hex Nipple (NPTF)
5404N Seamless Pipe Nipple (NPTF)
5405 Male NPTF x Female NPTF Increase/ Extension
5406 Hex Reducer Pipe Bushing (NPTF)
5406C Pipe Cap (NPTF)
5406H Face Reducer Pipe Bushing (NPTF)
5406P Hex Head Pipe Plug (NPTF)
5407 Square Head Pipe Plug (NPTF)
27015 Flareless Compression Reducer
27105 Flareless Tube Nut (use with Tube Sleeve)
27129 Flareless Compression Cap
27165A Flareless Tube Sleeve (use with Tube Nut)
27205 Flareless Compression x Male NPTF
27208 JIC x Flareless Tube Union
27229 Flareless Compression Tube Plug
27255 Flareless Compression x Female NPTF
Flareless Compression Tube Fittings
27305 Flareless Compression Tube Union
27306 Flareless Compression Large Hex Tube Union
27315 Flareless Compression x O-Ring Boss
27316 Flareless Compression x O-Ring Boss Long
27325 Flareless Compression Bulkhead Union
27328 JIC x Flareless Bulkhead Tube Union
27355 Flareless x Male NPTF 45° Elbow
27365 Flareless Compression x O-Ring Boss 45° Elbow
27405 Flareless x Male NPTF 90° Elbow
27455 Flareless x Female NPTF 90° Elbow
27505 Flareless Compression Union 90° Elbow
27515 Flareless x O-Ring Boss 90° Elbow
27525 Flareless Bulkhead Union 90° Elbow
27605 Flareless x Male NPTF Branch Tee
27655 Flareless x Female NPTF Branch Tee
27705 Flareless Compression Union Tee
27715 Flareless x O-Ring Boss Branch Tee
27716 Flareless x O-Ring Boss Run Tee
27755 Flareless x Male NPTF Run Tee
27805 Flareless x Female NPTF Run Tee
27924 Flareless Compression Bulkhead Locknut
27955 Flareless Compression Union Cross
5701 Male JIC x Male NPTF Swivel 90° Elbow
FS304C Face Seal Cap
FS306 Face Seal Bulkhead Locknut
FS318 Face Seal Tube Nut (Braze)
FS319 Face Seal Tube Sleeve (Braze)
FS319R Face Seal Tube Sleeve Reducer (Braze)
FS418 Face Seal Tube Nut (No-Braze)
FS419 Face Seal Tube Sleeve (No-Braze)
FS719 Face Seal No-Braze Ferrule
FS4000 Face Seal O-Ring
O-Ring Face Seal (ORFS)FS2403 Face Seal Tube Union
FS2404 Face Seal x Male NPTF
FS2406 Face Seal Swivel Nut Reducer
FS2408 Face Seal Plug
FS2500 Face Seal Union 90° Elbow
FS2501 Face Seal x Male NPTF 90° Elbow
FS2503 Face Seal x Male NPTF 45° Elbow
FS2704LN Face Seal Bulkhead Union Run Tee with Locknut
FS6504 Face Seal Swivel Nut x Male JIC
FS6809 Face Seal Swivel Nut x O-Ring Boss 90° Elbow
FS2601 Face Seal x Male NPTF Branch Tee
FS6400 Face Seal x O-Ring Boss
FS6590 Face Seal x Male JIC 90° Elbow
FS7504 Face Seal x Face Seal Swivel Nut Adapter
FS2603 Face Seal Union Tee
FS6400L Face Seal x O-Ring Boss Long
FS6600 Face Seal Swivel Nut Branch Tee
FS2650 Face Seal Union Cross
FS6402 Face Seal x Female JIC Swivel
FS6602 Face Seal Swivel Nut Run Tee
FS2700LN Face Seal Bulkhead Union with Locknut
FS6403 Face Seal x Male JIC
FS6801 Face Seal x O-Ring Boss 90° Elbow
FS2701LN Face Seal Bulkhead Union 90° Elbow with Locknut
FS6412 Face Seal Swivel x O-Ring Boss
FS6802 Face Seal x O-Ring Boss 45° Elbow
FS2702LN Face Seal Bulkhead Union 45° Elbow with Locknut
FS6500 Face Seal Swivel Nut 90° Elbow
FS6803 Face Seal x O-Ring Boss Branch Tee
FS2703LN Face Seal Bulkhead Union Branch Tee with Locknut
FS6502 Face Seal Swivel Nut 45° Elbow
FS6804 Face Seal x O-Ring Boss Run Tee
61SF-KIT Code 61 Split Flange Kit
62SF Code 62 Split Flange Half
62SF-KIT Code 62 Split Flange Kit
1700 Male JIC x Code 61 Flange Forged
1703 Male JIC x Code 61 Flange 45° Forged Elbow
1704 Male JIC x Code 61 Flange 90° Forged Elbow
1800 Male JIC x Code 62 Flange Forged
1803 Male JIC x Code 62 Flange 45° Forged Elbow
1804 Male JIC x Code 62 Flange 90° Forged Elbow
6100 Male JIC x Code 61 Flange Brazed
6145 Male JIC x Code 61 Flange 45° Bent Tube Elbow
6190 Male JIC x Code 61 Flange 90° Bent Tube Elbow
6200 Male JIC x Code 62 Flange Brazed
6245 Male JIC x Code 62 Flange 45° Bent Tube Elbow
6290 Male JIC x Code 62 Flange 90° Bent Tube Elbow
FS1700 Face Seal x Code 61 Flange
FS1703 Face Seal x Code 61 Flange 45° Elbow
FS1704 Face Seal x Code 61 Flange 90° Elbow
FS1800 Face Seal x Code 62 Flange
FS1803 Face Seal x Code 62 Flange 45° Elbow
FS1804 Face Seal x Code 62 Flange 90° Elbow
W43 Female NPTF x Code 61 Flange Pad
W44 Female NPTF x Code 62 Flange Pad
W46 Female O-Ring Boss x Code 61 Flange Pad
W48 Female O-Ring Boss x Code 62 Flange Pad
W300 Male JIC x Code 61 Flange Pad
W304 Face Seal x Code 61 Flange Pad
W600 Male JIC x Code 62 Flange Pad
W604 Face Seal x Code 62 Flange Pad
610 Buna O-Ring for Flange (Code 61 or 62)
5408 Square Socket Pipe Plug (NPTF)
5409 Hex Socket Pipe Plug (NPTF)
5500 90° Male Pipe Elbow (NPTF)
5503 Male NPTF x Female NPTF 45° Street Elbow
5504 90° Female Pipe Elbow (NPTF)
5505 45° Female Pipe Elbow (NPTF)
5600 Male Pipe Tee (NPTF)
5601 Male NPTF x Female NPTF Branch Tee
5602 Male NPTF x Female NPTF Street Tee
5603 Male NPTF x Female NPTF Run Tee
5604 Female NPTF x Male NPTF Branch Tee
5605 Female Pipe Tee (NPTF)
5652 Female Pipe Cross (NPTF)
5655 Female NPTF x Male NPTF Cross
5700 Male NPTF x Male NPTF Swivel 90° Elbow
5701 Male JIC x Male NPTF Swivel 90° Elbow
5702 Female NPTF x Male NPTF Swivel 90° Elbow
5501 45° Male Pipe Elbow (NPTF)
5502 Male NPTF x Female NPTF 90° Street Elbow
4404 Hose Barb x Male NPTF
4501 Hose Barb x Male NPTF 90° Elbow
4503 Hose Barb x Male NPTF 45° Elbow
4504 Hose Barb Mender Tee
4601 Hose Barb x O-Ring Boss 90° Elbow
4603 Hose Barb x O-Ring Boss 45° Elbow
4604 Hose Barb x O-Ring Boss
TBC T-Bolt Hose Clamp
Beaded Hose Barbs700 Series ISO 7241-1 Series B
Interchanges with Parker 60 Series
AG Series ISO 5675 Agricultural Interchange
Interchanges with Parker 4000 Series
Call us for tools, too!Tube cutters, hose saws, flaring tools and more…
2 LOCATIONS TO SERVE YOU
PHILADELPHIA - 215-744-2828
MECHANICSBURG - 717-691-3171
© Copyright 2009 and 2014, Hydraulax Products Inc. All rights reserved. Printed in the U.S.A.
GOT STAINLESS?Many of the fittings shown here are also
available in Type 316 Stainless Steel.
HT Series ISO 16028 Flushface Interchange
Interchanges with Parker FEM Series
4100 Series Wet Line Coupling
Interchanges with Parker 6100 Series
HYDRAULAPRODUC T S BRASS FITTINGS & ADAPTERS
HYDRAULAPRODUC T S
Coiled Air Hose Assembly
Brass Pipe Fittings (NPTF)
341 SAE 45° Long Flare Nut
342 SAE 45° Tube Union
343 Check Valve (SAE 45° x NPTF)
344 SAE 45° Union Tee
345 SAE 45° x NPTF Male Pipe Branch Tee
346 SAE 45° x NPTF Female Pipe
348 SAE 45° x NPTF Male Pipe
349 SAE 45° x NPTF Male Pipe 90°
SAE 45° Flare
350 SAE 45° x NPTF Female Pipe 90°
351 SAE 45° x NPTF Male Pipe Run Tee
354 SAE 45° x NPTF Male Pipe 45°
355 SAE 45° Union 90°
359 SAE 45° Cap
31110 SAE 45° Short Flare Nut
3229 SAE 45° Tube Plug
SAE 45° x Inverted Flare Adapter
Truck Shut-Off Valve
Assorted Valves and DrainsDrain Cock NPTF Female
Mini Ball ValveGround Plug Drain NPTF Male x NPTF
Female Mini Ball ValveSAE 45° x SAE 45¯ Shut-Off Valve
SAE 45° x NPTF Male Shut-Off Valve
NPTF Double Female Shut-Off Valve
NPTF Male x NPTF Female Shut-Off Valve
Marine Type Shut-Off Valve (NPTF)
NPTF Male x NPTF Female Needle Valve
3-Way and 4-Way Shut-Off Valves
Drains (Internal and External Seats)
Hose to Pipe Needle Valves
Air Vent
Angle Bib Drain
Gasoline Shut-Off Valve (with screen filter)
NPTF Double Female Needle Valve
NPTF Double Male Needle Valve
SAE 45° Double Male Needle Valve
SAE 45° x NPTF Male Needle Valve
SAE 45° x NPTF Male 90° Needle Valve
360 Compression Tube Sleeve
361 Compression Tube Nut
362 Compression Tube Union
363 Check Valve (Compression x NPTF)
364 Compression Union Tee
365 Compression Union 90°
366 Compression x NPTF Female Pipe
368 Compression x NPTF Male Pipe
Brass Compression
369 Compression x NPTF Male Pipe 90°
370 Compression x NPTF Female Pipe 90°
371 Compression x NPTF Male Pipe Run Tee
372 Compression x NPTF Male Pipe Branch Tee
374 Compression Bulkhead Tube Union
376 NPTF Female x NPTF Male x Compression Tee
31611 Long Compression Nut
32030 Tubing Insert
Push-In31129 Plastic Plug
31154S Push-In x NPTF Male Pipe Swivel 45°
31162 Push-In Tube Union
31164 Push-In Tube Union Tee
31165 Push-In Tube Union 90°
31166 Push-In x NPTF Female Pipe
31168 Push-In x NPTF Male Pipe
31169 Push-In x NPTF Male Pipe 90°
31169S Push-In x NPTF Male Pipe Swivel 90°
31170 Push-In x NPTF Female Pipe 90°
31170S Push-In x NPSM Female Pipe Swivel 90°
31171 Push-In x NPTF Male Pipe Run Tee
31171S Push-In x NPTF Male Pipe Swivel Run Tee
31172 Push-In x NPTF Male Pipe Branch Tee
31172S Push-In x NPTF Male Pipe Swivel Branch Tee
31182 Push-In Bulkhead Tube Union
31186 Push-In Bulkhead x NPTF Female Pipe
31188 Push-In Y Connector x NPTF Male Pipe
31189 Push-In Y Union
3100 Inverted Flare Tube Nut (Brass)
3105 Inverted Flare Tube Nut (Steel)
3131 Inverted Flare Plug (Steel)
3202 Inverted Flare x NPTF Male Pipe
3252 Inverted Flare x NPTF Female Pipe
Inverted Flare3302 Inverted Flare Union
3352 Inverted Flare x NPTF Male Pipe 45°
3402 Inverted Flare x NPTF Male Pipe 90°
3452 Inverted Flare x NPTF Female Pipe 90°
3502 Inverted Flare Union 90°
3602 Inverted Flare x NPTF Male Pipe Branch Tee
3652 Inverted Flare x NPTF Female Pipe Branch Tee
3702 Inverted Flare Union Tee
3752 Inverted Flare x NPTF Male Pipe Run Tee
37896 Inverted Flare Long Tube Nut (Steel)
SAE 45° x Inverted Flare Adapter
271 NPTF Male Pipe Swivel
272 NPTF Male Pipe
273 NPFT Male Pipe 90°
274 NPFT Male Pipe 45°
278 NPSM Female Pipe Swivel (Ballseat type)
280 NPSM Female Pipe Swivel (Gasket type)
282 SAE 45° Male
284 SAE 45° Female Swivel
Push-Lock Hose Barbs Push-Lock Hose Barbs do not require clamps or ferrules when used with Push-Lock Hose.
286 JIC 37° Male
9900 BSPP Female Swivel (Steel)
296 Push-Lock Hose Mender
287 SAE 45° / JIC 37° Dual Seat Female Swivel
9905 BSPP Female Swivel 45° (Steel)
288 JIC 37° Female Swivel
9910 BSPP Female Swivel 90° (Steel)
289 JIC 37° Female Swivel 90° (Steel)
9915 BSPT Male Rigid (Steel)
290 Inverted Flare Male Swivel
9920 BSPP Male Rigid (Steel)
292 Inverted Flare Female
294 Rigid Tube Shank (North American)
294M Rigid Tube Shank (Metric)
102 NPTF Male Pipe
103 NPTF Male Pipe Swivel
104 NPTF Female Pipe
124 NPSM Female Pipe Swivel
129 NPTF Male Pipe 90°
139 NPTF Male Pipe 45°
142 SAE 45° Male Rigid
143 SAE 45° / JIC 37° Dual Seat Female Swivel
Brass Hose Barbs
144 SAE 45° Female Swivel
513 Garden Hose Cap
145 JIC 37° Female Swivel
514 Garden Hose x NPTF (3/4" Male, 1/2" Female)
172 NPSM x NPTF Adapter
585 Garden Hose Male
176 NPSM x NPSM Union
588 Garden Hose Female Swivel
177 Hose Mender Elbow
178 Hose Mender
179 Hose Mender Tee
Gladhand Couplings
Coiled Air Brake Hose Kit
Bulkhead Coupling NPTF Male x NPTF Female
Bulkhead Coupling NPTF Male x NPTF Dual (Male and Female)
Bulkhead Coupling NPTF Female x NPTF Female
Miscellaneous AccessoriesIndustrial Interchange Quick Disconnects
ARO Speed Connect Couplers
Blow Gun Pressure Gauges Air Line Filters Regulators Micro-Fog Lubricators
Compression Air Brake31460 Tube Sleeve (Nylon Tubing)
31360 Tube Sleeve (Copper Tubing)
31461 Tube Nut (Nylon Tubing)
31361 Tube Nut (Copper Tubing)
31462 Tube Union (Nylon Tubing)
31362 Tube Union (Copper Tubing)
31464 Tube Union Tee (Nylon Tubing)
31364 Tube Union Tee (Copper Tubing)
31465 Tube Union 90° (Nylon Tubing)
31365 Tube Union 90° (Copper Tubing)
31466 Nylon Tubing x NPTF Female Pipe
31366 Copper Tubing x NPTF Female Pipe
31468 Nylon Tubing x NPTF Male Pipe
31368 Copper Tubing x NPTF Male Pipe
31469 Nylon Tubing x NPTF Male Pipe 90°
31369 Copper Tubing x NPTF Male Pipe 90°
31469L Nylon Tubing x NPTF Male Pipe 90° Long
31369L Copper Tubing x NPTF Male Pipe 90° Long
31470 Nylon Tubing x NPTF Female Pipe 90°
31370 Copper Tubing x NPTF Female Pipe 90°
31471 Nylon Tubing x NPTF Male Pipe Run Tee
31371 Copper Tubing x NPTF Male Pipe Run Tee
31472 Nylon Tubing x NPTF Male Pipe Branch Tee
31372 Copper Tubing x NPTF Male Pipe Branch Tee
31474 Bulkhead Tube Union (Nylon Tubing)
31480 Nylon Tubing x NPTF Male Pipe 45°
31380 Copper Tubing x NPTF Male Pipe 45°
31482 Nylon Tubing x NPTF Female x NPTF Male Tee
31382 Copper Tubing x NPTF Female x NPTF Male Tee
31484 Nylon Tubing Tubing Insert
Push-In Air Brake For use with Nylon Air Brake Tubing
31862 Push-In Air Brake Tube Union
31864 Push-In Air Brake Union Tee
31865 Push-In Air Brake Union 90°
31866 Push-In Air Brake x Female Pipe
31868 Push-In Air Brake x Male Pipe
31869 Push-In Air Brake x Male Pipe 90°
31871 Push-In Air Brake x Male Pipe Run Tee
31871S Push-In Air Brake x Male Pipe Swivel Run Tee
31872 Push-In Air Brake x Male Pipe Branch Tee
31874 Push-In Air Brake Bulkhead Tube Union
31880 Push-In Air Brake x Male Pipe 45°
31880S Push-In Air Brake x Male Pipe Swivel 45°
31869S Push-In Air Brake x Male Pipe Swivel 90°
31870 Push-In Air Brake x Female Pipe 90°
31872S Push-In Air Brake x Male Pipe Swivel Branch Tee
Wormgear Hose Clamps
Brass Hose Ferrules
Forged Brass Ball Valves
31102 Locknut for Pipe
33129 NPTF Cap
33150 NPTF Slotted Head Plug
33151 NPTF Square Head Plug
33152 NPTF Hex Head Plug
33155 NPTF Countersunk Hex Head Plug
33200 NPTF Female x NPTF Male Extender/Reducer
33220 NPTF Male x NPTF Female Reducer Bushing
33250 Female Pipe Union
33300 NPTF Female Pipe Coupling
33325 Hex Pipe Nipple (NPTF)
33326 Seamless Pipe Nipple (NPTF)
33350 45° Street Elbow
33400 90° Street Elbow
33455 90° Male Pipe Elbow
33500 90° Female Pipe Elbow
33600 NPTF Female x NPTF Male Pipe Branch Tee
33700 NPTF Female Pipe Tee
33750 Street Tee
LCTS Teflon® (PTFE) Paste Thread Sealant
33950 NPTF Female Pipe Cross
TT Teflon® (PTFE) Thread Sealing Tape
8-2404 JIC Male x NPTF Male
8-2501 JIC Male x NTPF Male 90°
K11 General Purpose Hose Use with Brass Hose Barbs
3384 Push-Lock Hose Use with Push-Lock Hose Barbs
NT100 Nylon Air Brake Tubing
Available in 9 colors
2 Locations to serve You
PhiLadeLPhia - 215-744-2828
Mechanicsburg - 717-691-3171
Dash Size
Tube/Pipe Size
Pipe Thread (NPTF/NPSM) JIC 37° Flare O-Ring Boss
(ORB)O-Ring Face
Seal (OFS)Flareless
Compression
-02 1⁄8" 1⁄8 – 27 5⁄16 – 24 5⁄16 – 24 5⁄16 – 24-03 3⁄16" 3⁄8 – 24 3⁄8 – 24 3⁄8 – 24-04 1⁄4" 1⁄4 – 18 7⁄16 – 20 7⁄16 – 20 9⁄16 – 18 7⁄16 – 20-05 5⁄16" 1⁄2 – 20 1⁄2 – 20 1⁄2 – 20-06 3⁄8" 3⁄8 – 18 9⁄16 – 18 9⁄16 – 18 11⁄16 – 16 9⁄16 – 18-08 1⁄2" 1⁄2 – 14 3⁄4 – 16 3⁄4 – 16 13⁄16 – 16 3⁄4 – 16-10 5⁄8" 7⁄8 – 14 7⁄8 – 14 1– 14 7⁄8 – 14-12 3⁄4" 3⁄4 – 14 11⁄16 – 12 11⁄16 – 12 13⁄16 – 12 11⁄16 – 12-14 7⁄8" 13⁄16 – 12 13⁄16 – 12 13⁄16 – 12-16 1" 1– 111⁄2 15⁄16 – 12 15⁄16 – 12 17⁄16 – 12 15⁄16 – 12-20 11⁄4" 11⁄4 – 111⁄2 15⁄8 – 12 15⁄8 – 12 111⁄16 – 12 15⁄8 – 12-24 11⁄2" 11⁄2 – 111⁄2 17⁄8 – 12 17⁄8 – 12 2 – 12 17⁄8 – 12-32 2" 2 – 111⁄2 21⁄2 – 12 21⁄2 – 12 21⁄2 – 12
BRITISH & METRIC ADAPTERS
2 LOCATIONS TO SERVE YOU 5606 Tulip St Philadelphia, PA 19124 215-744-2828 6360 Basehore Rd Mechanicsburg, PA 17050 717-691-3171
Braided Hose Fittings are interchangeable with Weatherhead U Series, Dayco-Eastman HY Series, Aeroquip FJ Series, Imperial-Eastman HU Series and Dayco SB Series hose fittings.
Use with the following hydraulic hoses: HT Tough Cover, HJK Jack Hose, SAE 100R1AT, SAE 100R2AT, SAE 100R3, SAE 100R16, and SAE 100R17.
Also available, W Series Hose Fittings for 4-wire spiral hoses.
Push-Lock Hose Barbs need no clamps or ferrules when used with Push-Lock Hose.
9391 Komatsu x Female Komatsu Swivel Run Tee
BSPP/BSPT l.Rh. DIN Light S.Rh. DIN HeavyNominal Pipe Size
Dash Size
Nominal Thread Size
Male Thread O.D.
Nominal Tube Size
Dash Size
Nominal Thread Size
Male Thread O.D.
Nominal Tube Size
Dash Size
Nominal Thread Size
Male Thread O.D.
1/8" 02 1/8-28 3/8" 6 mm L6 M12x1.5 12 mm 6 mm S6 M14x1.5 14 mm1/4" 04 1/4-19 33/64" 8 mm L8 M14x1.5 14 mm 8 mm S8 M16x1.5 16 mm3/8" 06 3/8-19 19/32" 10 mm L10 M16x1.5 16 mm 10 mm S10 M18x1.5 18 mm1/2" 08 1/2-14 3/4" 12 mm L12 M18x1.5 18 mm 12 mm S12 M20x1.5 20 mm5/8" 10 5/8-14 7/8" 15 mm L15 M22x1.5 15 mm 14 mm S14 M22x1.5 22 mm3/4" 12 3/4-14 1-1/32" 18 mm L18 M26x1.5 18 mm 16 mm S16 M24x1.5 24 mm
1" 16 1-11 1-5/16" 22 mm L22 M30x2.0 22 mm 20 mm S20 M30x2.0 30 mm1-1/4" 20 1¼-11 1-21/32" 28 mm L28 M36x2.0 28 mm 25 mm S25 M36x2.0 36 mm1-1/2" 24 1½-11 1-7/8" 35 mm L35 M45x2.0 35 mm 30 mm S30 M42x2.0 42 mm
2" 32 2-11 2-11/32" 42 mm L42 M52x2.0 42 mm 35 mm S38 M52x2.0 52 mm
British Standard Pipe Parallel (BSPP) Metric Fittings9001 Metric x Metric
6606 Face Seal x Metric Heavy Dual Purpose (Port/Tube)
6605 Face Seal x Metric Light Dual Purpose (Port/Tube)
6169 Face Seal x Metric Adj. Branch Tee
6168 Face Seal x Metric Adj. Run Tee
6069 Face Seal x Metric Adj. 90° Elbow
6068 Face Seal x Metric (includes washer & O-ring)
British Standard Pipe Taper (BSPT)9003 British Pipe Nipple (BSPP x BSPT)
9008 BSPT x NPTF Male Pipe
9010 British Pipe Nipple (BSPT x BSPT)
9011 JIC 37° x BSPT
9030T BSPT Hex Head Plug
9030TCSP BSPT Countersunk Hex Plug
9031 BSPT x Female BSPT Reducer Bushing
9032 BSPT x Female BSPP Bushing
9032S BSPT x Female BSPP Swivel
9034 BSPP x Female BSPT Extended Bushing
9042 BSPT x NPTF Female Pipe
9062 BSPT x Female BSPP Swivel 90° Elbow
9063 JIC 37° x BSPT 90° Elbow
9064 JIC 37° x BSPT 45° Elbow
9163 JIC 37° x BSPT Run Tee
9164 JIC 37° x BSPT Branch Tee
9223 JIS 30° x BSPT
9224 JIS 30° x BSPT 90° Elbow
9225 JIS 30° x BSPT 45° Elbow
9233 Komatsu 30° x BSPT
9536 BSPT x Female Straight Thread (ORB)
MBSPT BSPT Male Rigid
Japanese Industrial Standard (JIS 30°) Uses BSPP thread
9999 JIS 30° Sealing Seat (converts BSPP to JIS 30°)
9337 JIC 37° x JIS 30°
Specialty Mobile Equipment Komatsu, Kobelco, and JSW (Japan Steel Works)
9232 Komatsu Cap
9231 Komatsu Hex Head Plug
9230 JIC 37° x Female Komatsu
9210 JIC 37° x Female BSPP Flat-Face Swivel (HIAB)
6247 Face Seal x Kobelco
6237 Face Seal x Komatsu
6230 Face Seal x Female Komatsu
9249 Kobelco Tube Cap
9248 Kobelco Tube Plug
9247 JIC 37° x Kobelco
9245 JIC 37° x Japan Steel Works (JSW)
9237 JIC 37° x Komatsu
9236 Komatsu x Komatsu Tube Union
9233 Komatsu x BSPT
Seals, Sealing Seats, Etc.9999 JIS 30° Sealing Seat (converts BSPP to JIS 30°)
9777 Flat-Face BSPP (HIAB) 30° Sealing Seat
9500-V Bonded Seal for BSPP (Viton Seal)
9500-MM Bonded Seal for Metric Thread (Buna)
9500 Bonded Seal for BSPP (Buna Seal)
9392 Komatsu x Female Komatsu Swivel 90° Elbow
9336 JIS 30° Tube Union
9292 JIS 30° x Female JIS 30° Swivel 90° Elbow
9291 JIS 30° x Female JIS 30° Swivel Run Tee
9278 JIS 30° x Straight Thread (ORB) 90° Elbow
9277 JIS 30° x Straight Thread (ORB)
9259 JIS 30° x BSPP Adj. 90° Elbow
9226 Female JIC 37° Swivel x Female JIS 30° Swivel
9225 JIS 30° x BSPT 45° Elbow
9224 JIS 30° x BSPT 90° Elbow
9223 JIS 30° x BSPT
9222 JIS 30° Cap
9221 JIS 30° Hex Head Plug
9220 JIC 37° x Female JIS 30°
6337 Face Seal x JIS 30°
9029A Metric Countersunk Plug (No Seal)
9029 Metric Countersunk Sealed Plug
9024 Metric x Female JIC 37° Swivel
9022 JIC 37° x Female Metric Swivel
9019 BSPP x Female Metric Swivel
9018 Metric x Female BSPP Swivel
9004 BSPP x Metric
9069L JIC 37° x Metric Adj. 90° Elbow Long
9069 JIC 37° x Metric Adj. 90° Elbow
9068 JIC 37° x Metric (includes washer & O-ring)
9067 JIC 37° x Metric
9066 JIC 37° x Metric Adj. 45° Elbow
9043M Female Metric Coupling
9030M Metric Hex Head Plug
9202 Metric Tube Cutting Ring
9201S Metric Tube Nut (Heavy Series)
9201LL Metric Tube Nut (Extra Light Series)
9201L Metric Tube Nut (Light Series)
9200 JIC 37° x Metric Standpipe
9169 JIC 37° x Metric Adj. Branch Tee
9168 JIC 37° x Metric Adj. Run Tee
9325 NPTF Male Pipe x Female Metric
9235 Metric x NPTF Female Pipe
9204S Metric Tube Cap (Heavy Series)
9204L Metric Tube Cap (Light Series)
9203S Metric Tube Plug (Heavy Series)
9203L Metric Tube Plug (Light Series)
9202LL Metric Tube Cutting Ring (Extra Light Series)
FDINLX90 DIN Light Universal Seat Female Swivel 90°
FDINLX45 DIN Light Universal Seat Female Swivel 45°
FDINLX DIN Light Universal Seat Female Swivel
9635 Metric Dual Purpose (Port or Tube) x NPTF Female
9606 JIC x Metric Dual Purpose Heavy (Port or Tube)
9605 JIC x Metric Dual Purpose Light (Port or Tube)
9335 Metric x Female Straight Thread (ORB)
MDH DIN Heavy Universal Seat Male Rigid
MDL DIN Light Universal Seat Male Rigid
FDINHX90 DIN Heavy Universal Seat Female Swivel 90°
FDINHX45 DIN Heavy Universal Seat Female Swivel 45°
FDINHX DIN Heavy Universal Seat Female Swivel
9000 BSPP x BSPP British Pipe Nipple
6159 Face Seal x BSPP Adj. Branch Tee
6158 Face Seal x BSPP Adj. Run Tee
6059 Face Seal x BSPP Adj. 90° Elbow
6058 Face Seal x BSPP Adj. 45° Elbow
6002L Face Seal x BSPP Long (includes washer & O-ring)
6002 Face Seal x BSPP (includes washer & O-ring)
9007 BSPP x NPTF Male Pipe
9006 Straight Thread (ORB) x BSPP
9005 JIC 37° x BSPP
9004 BSPP x Metric
9003 BSPP x BSPT British Pipe Nipple
9002L JIC 37° x BSPP Long (includes washer & O-ring)
9002 JIC 37° x BSPP (includes washer & O-ring)
9025 Female BSPP Swivel Union
9023 NPTF Male Pipe x Female BSPP Swivel
9021 BSPP x Female SAE 37° (JIC) Swivel
9019 BSPP x Female Metric Swivel
9018 Metric x Female BSPP Swivel
9015 BSPP x Female BSPP Swivel
9009 JIC 37° x Female BSP Solid
9034 BSPP x Female BSPT Extended Bushing
9033 BSPP Swivel Cap
9032S BSPT x Female BSPP Swivel
9032 BSPT x Female BSP Solid
9030 BSPP Hex Head Plug
9028 BSPP Countersunk Sealed Plug
9027 Female BSPP Swivel x Female JIC 37° Swivel
9040L BSPP Bulkhead Union Long (includes locknut)
9040 BSPP Bulkhead Union (includes locknut)
9039 BSPP x Female BSP Solid Extended Bushing
9038 BSPP x Female BSP Solid Reducer Bushing
9037 NPTF Male Pipe x Female BSP Solid
9036 BSPP x Female Straight Thread (ORB)
9035 BSPP x NPTF Female Pipe
9051 BSPP x BSPP Adj. 45° Elbow
9050 Female BSPP Swivel 90° Elbow
9047 BSPP x Female BSPP Swivel 45° Tube Elbow
9045 BSPP x Female BSPP Swivel 90° Elbow
9044 Female BSP Solid x NPTF Female Pipe
9043 Female BSP Solid Coupling
9041 BSPP Bulkhead Locknut
9058 JIC 37° x BSPP Adj. 45° Elbow
9057 BSPP x BSPT 90° Elbow
9056 JIC 37° x Female BSPP Swivel 90° Elbow
9055 BSPP x BSPP 90° Elbow
9054 BSPP x BSPT 45° Elbow
9053 Female BSPP Swivel 45° Elbow
9052 BSPP x BSPP Adj. 90° Elbow
9070 NPTF Male Pipe x BSPP 90° Elbow
9065 JIC 37° x BSPP 90° Elbow
9062 BSPT x Female BSPP Swivel 90° Elbow
9061 BSPP x Female JIC 37° Swivel 90° Elbow
9060 BSPP x Female BSPP Swivel 90° Elbow
9059L JIC 37° x BSPP 90° Elbow Long
9059 JIC 37° x BSPP Adj. 90° Elbow
9080 BSPP Male Tee
9079 BSPP x Straight Thread (ORB) Branch Tee
9078 BSPP x Straight Thread (ORB) Run Tee
9077 BSPP x Straight Thread (ORB) 90° Elbow
9076 Female BSP Solid 90° Elbow
9075 Female BSPP Swivel 90° Elbow
9072 NPTF Male Pipe x Female BSPP Swivel 90° Elbow
9097 Female BSP Solid Cross
9095 Female BSPP Swivel x BSPP Run Tee
9090 BSPP x Female BSPP Swivel Run Tee
9087 BSPP x Female BSPP Swivel Branch Tee
9086 Female BSP Solid Tee
9085 Female BSPP Swivel Tee
9250 JIC 37° x Female BSPP Swivel 90° Elbow
9240 JIC 37° x Female BSPP Swivel
9210 JIC 37° x Female BSPP Flat-Face Swivel (HIAB)
9159 JIC 37° x BSPP Adj. Branch Tee
9158 JIC 37° x BSPP Adj. Run Tee
9152 BSPP x BSPP Adj. Branch Tee
9151 BSPP x BSPP Adj. Run Tee
MBSPP BSPP Male Rigid
FBSPX90 BSPP Female Swivel 90° Tube Elbow
FBSPX45 BSPP Female Swivel 45°
FBSPX BSPP Female Swivel
FBFPX BSPP Flat-Face (HIAB) Female Swivel
9260 JIC 37° x Female BSPP Swivel 45° Elbow
9259 JIS 30° x BSPP Adj. 90° Elbow
9054 BSPP x BSPT 45° Elbow
FKOMX Komatsu Female Swivel
9057 BSPP x BSPT 90° Elbow
6220 Face Seal x Female JIS 30°
© 2008, 2012-2016 Hydraulic Fittings Company, Inc. Printed in the USA
Push-Lock Hose Barbs 9920 BSPP Male Rigid
9915 BSPT Male Rigid
9910 BSPP Female Swivel 90°
9905 BSPP Female Swivel 45°
9900 BSPP Female Swivel
3384 Push-Lock Low Pressure Hose (also available in red, blue, yellow and gray)
9227 Female JIS 30° Swivel Union
9293TP JIS 30° x Female JIS 30° Swivel Test Port Tee
Test Port: M10x1 metric
9005L JIC 37° x BSPP Long
9005EL JIC 37° x BSPP Extra Long
9015TP BSPP x Female BSPP Swivel Test Port Tee
Test Port: BSPP/BSPT
9022F JIC 37° x Female Metric Flat-Face (Solid)
9035S BSPP x NPTF Female Pipe (includes washer & O-ring)
9048 BSPP x Female BSPP Swivel 45° Forged Elbow
9327 Female Komatsu Swivel Union
9326 Female JIC 37° Swivel x Female Komatsu Swivel
FBSPX90B BSPP Female Swivel 90° Block Elbow
9605S JIC x Metric Dual Purpose Light (w/ washer, O-ring)
9606S JIC x Metric Dual Purpose Heavy (w/ washer, O-ring)
9607 NPTF Male x Metric Dual Purpose (Port or Tube)
9622 JIC 37° x Female Metric
9624 Female JIC x Metric Dual Purpose (Port or Tube)
9634TP Komatsu x Fem. Komatsu Swivel Test Port Tee
Test Port: SAE/ORB
9635S Metric (w/ washer, O-ring) x NPTF Female Pipe
9638 Male Metric x Female Metric
9643 NPF Female Pipe x Female Metric
Hydraulic Hose Fittings
MMSP Metric Stand Tube
MMSP45 Metric Stand Tube 45°
MMSP90 Metric Stand Tube 90°
All fittings shown are carbon steel with an anti-corrosive plating
Some fittings also available in stainless steel or brass. Please call for availability.
British and Metric Thread Identification Kit21 metric and 10 British pipe samples in both male and female threads. (ID-Kit)
Visit us online for more information on fittings
www.hydraulax.com
NOTE: A female BSP solid (parallel thread) will mate and seal with either a BSPP (parallel) male or a BSPT (tapered) male.
NOTE: A female BSP solid (parallel thread) will mate and seal with either a BSPP (parallel) male or a BSPT (tapered) male.
JIS 30° Fittings feature a 30° sealing seat and BSPP threads.
HYDRAULIC HOSE.com®
Page 202 Customer Service: 800-535-1302 (1-215-744-2828 outside the USA) Revised 3/17
Size Chart - Hydraulic Quick Couplers
ISO 16028 HT Series Flush-Face Interchanges with:• Faster FFI Series• Holmbury A Series• Parker FEM Series• Snap-Tite 74 Series
ISO 5675 AG Series AgriculturalInterchanges with:• Faster NS Series• Parker/Pioneer 4000 Series• Safeway S20 Series• Tomco PC Series
ISO 7241-1 Series B 700 Series Hydraulic
Interchanges with:• Aeroquip FD45 Series• Faster HNV Series• Hansen HK Series• Parker 60 Series• Snap-Tite 72 Series
ISO 7241-1 Series A 600 Series HydraulicInterchanges with:• Aeroquip FD56 (5600) Series• Faster ANV Series• Hansen HA15000 Series• Parker 6600 Series• Safeway S56 Series
The fractional (½", ¾", etc.) coupler sizes shown here are nominal only. To identify your existing hydraulic quick couplers, match the male coupler to one of the outlines show below.
HYDRAULIC HOSE.com®
Revised 3/17 Customer Service: 800-535-1302 (1-215-744-2828 outside the USA) Page 203
Fluid Port and Connector Thread Sizes
Nominal Size
Dash Size
National Pipe Thread
SAE 37° Flare (JIC)
SAE 45° Flare
O-Ring Boss (ORB)
O-Ring Face Seal (ORFS)
Code 61 Flange
Code 62 Flange
Nominal size usually refers to inside pipe diameter or outside tube diameter. With flanges, nominal size refers to port hole diameter.
1/8" -02 1⁄8–27 5⁄16–24 5⁄16–24 5⁄16–243/16" -03 3⁄8–24 3⁄8–24 3⁄8–241/4" -04 1⁄4–18 7⁄16–20 7⁄16–20 7⁄16–20 9⁄16–185/16" -05 1⁄2–20 1⁄2–20 1⁄2–203/8" -06 3⁄8–18 9⁄16–18 5⁄8–18 9⁄16–18 11⁄16–167/16" -07 11⁄16–161/2" -08 1⁄2–14 3⁄4–16 3⁄4–16 3⁄4–16 13⁄16–16 1 3⁄16" 1 1⁄4"5/8" -10 7⁄8–14 7⁄8–14 7⁄8–14 1–143/4" -12 3⁄4–14 1 1⁄16–12 1 1⁄16–14 1 1⁄16–12 1 3⁄16–12 1 1⁄2" 1 5⁄8"7/8" -14 1 3⁄16–12 1 1⁄4–12 1 3⁄16–121" -16 1–111⁄2 1 5⁄16–12 1 3⁄8–12 1 5⁄16–12 1 7⁄16–12 1 3⁄4" 1 7⁄8"1¼" -20 1 1⁄4–111⁄2 1 5⁄8–12 1 5⁄8–12 1 11⁄16–12 2" 2 1⁄8"1½" -24 1 1⁄2–111⁄2 1 7⁄8–12 1 7⁄8–12 2–12 2 3⁄8" 2 1⁄2"2" -32 2–111⁄2 2 1⁄2–12 2 1⁄2–12 2 13⁄16" 3 1⁄8"
NATIONAL PIPE THREADSThere are several variations of pipe threads. Thread forms include the Dryseal American Standard Taper Pipe Thread (NPTF), the National Pipe Straight Threads for Mechanical Joints (NPSM) and the dryseal American Fuel Internal Straight Pipe Thread (NPSF). Each series is normally identified by the abbreviated letter designation.
The NPTF thread is recommended for hydraulic service. This thread series is used on both male and female ends and forms a seal by the interference fit at the root and crest of the mating threads. The NPTF male also has an internal chamfer of 30° which allows it to seal at the seat with female NPSM pipe swivels. The NPSM is a straight pipe thread and sealing is obtained by the mating of the 30° seats of the male and female ends.
FLARED TUBE FITTINGSSAE 37° Flare (JIC): The seal is obtained by the mating of two beveled metal surfaces. The function of the threads is simply to draw these two surfaces together. This style is used particularly in high pressure systems. As illustrated below, both the bevel on the male and the seat in the female are machined to 37°.
SAE 45° Flare: These flared tube fittings are similar to JIC, however the mating surfaces are machined at 45°. These couplings are usually used for low pressure applications such as refrigerant and fuel lines in conjunction with copper tubing which flares easily to 45°.
O-RING CONNECTIONSSAE Straight Thread (O-Ring Boss): This fitting is a modification of the male JIC where the beveled 37° nose has been removed and a groove has been machined between the threads and the hex in which an O-ring is seated. The female is a port which has been tapped to the proper straight thread size and chamfered at the port face to provide an O-ring seat. The seal is made when the O-ring is trapped between port chamfer, thread under-cut, and the male fitting.
O-Ring Face Seal (ORFS): Uses an O-ring (SAE J515) in a groove on the male face side. This is mated to flat face with an O-ring on the female swivel side, forming a seal without metal deformation much the same as an SAE four bolt split flange connection without the bolts. The O-ring face seal connection has been tested to SAE J343 tests and procedures and meets or exceeds SAE J1453 specifications. This connector has proven its superiority in leak resistance, ease of installation, high operating pressure, increased torque tolerance and reusability with its ability to be connected and disconnected frequently.
SAE J518 Four-Bolt Flange: Available in two pressure ratings. Code 61 is referred to as the “standard” series and Code 62 is the “6000 psi” series. The design of both series is the same, but the bolt-hole and flange diameters are different. The female port is unthreaded. The male consists of a flanged head, grooved for an O-ring. The seal is made when the O-ring is compressed between the flange head and the surface surrounding the port.