CREATING CLASSICS - alspec.com.au · Halliday + Baillie sliding door hardware is available in the...

CREATING CLASSICS

ARCHITECTURAL HARDWAREDesigned and manufactured in New Zealand

www.ha l l idayba i l l i e .com

PRODUCT LIST

Proudly partnered with

VALIDITYThis product list is effective as of August 2018 and cancels and supersedes all prior information.

All sales are subject to Halliday + Baillie’s general terms and conditions.

General Terms of Sale and Product Liability are available in writing upon request or can be downloaded from www.hallidaybaillie.com.

Please understand that despite best possible care, no responsibility is taken for any printing errors or omissions.

Any reprint, even in excerpts, is strictly subject to prior approval.

CONTENTSKIT 1: PROGLIDE MEETING + CORNER LOCKSTILES 5

KIT 2: PROGLIDE LOCKSTILES 9

KIT 3: PROGLIDE WIDE LOCKSTILES 13

KIT 4: HAWKESBURY TOP HUNG + SWAN EVO TOP HUNG 17

KIT 5: HAWKESBURY TOP HUNG + SWAN EVO TOP HUNG (WIDE STILES) 21

KEY CYLINDERS FOR KITS 1-5 25

FLUSH PULLS 27

H+B BUTTON ACTIVATED END PULLS 31

THE FINISHES Halliday + Baillie sliding door hardware is available in the following durable high-quality finishes. .

A general note on electroplating: Electroplating is done by passing an electric current through a solution that contains metal and the object being plated. The current causes the metal in the solution to be attracted to the object and to bond with it.

SC: To achieve the soft satin chrome finish, items are coppered and then applied with a special satin nickel plating process. In conjunction with a three stage polishing process this produces a smooth satin result that is then over-plated with chrome. Our satin chrome finish is suitable for both interior and exterior use, where durability is required.

EFW, EBA, EMB & EDB: Unlike anodized finishes Electro™ powder coatings can be applied to a wide variety of substrates. Electro™ finishes are highly durable and made from UV resistant materials. No liquid chemicals, solvents or caustic solutions are used in the manufacture of the Electro™ powder coatings and Electro™ powder coatings have a negligible VOC content. This range of coatings are suitable for a range of climatic conditions, from hot to cold and humid to dry. Please note Electro™ Medium Bronze has a pearlescent or metallic content rather than a standard flat paint finish.

SC: Satin Chrome EFW: Powder Coat Electro™ Flat White

EBA: Powder Coat Electro™ Black Ace

EMB: Powder Coat Electro™ Medium Bronze

EDB: Powder Coat Electro™ Dark Bronze

page 3

HB 640 HB 642 HB 643

KIT 1: PROGLIDE MEETING + CORNER STILES

HB 640 SERIES HB 630 SERIES

Welcome to the Halliday + Baillie/Alspec product listHalliday + Baillie have proudly worked alongside Alspec to find perfect solutions for several Alspec sliding joinery sections from within the Halliday + Baillie range.

With a few tweaks, plus the addition of H+B manufacturing some necessary parts, we have been able to provide seamless solutions that provide both form + function, and beautiful aesthetics for the Alspec range.

The following pages in this manual will provide you with complete kit options that you are able to order through Alspec.

Dependent on your frame type and closing requirement (see section details inside each kit#), there are lock tabs, strikes for proglide meeting and corner stiles, special adjustable strikes, that will be included when you purchase your individual kits.

Simply add your key cylinder to complete your kit.

Contact your local Alspec representative for more information or to see a sample.

Enjoy the manual!

Tanya Rive Director Halliday + Baillie Pty Ltd

page 4 page 5

HB 640 MODEL KEY + SNIB BOTH SIDES

H+B CODE ALSPEC CODE LOCK FINISH

HB 640 ALSPEC SC KIT 1 1379050 Satin Chrome

HB 640 ALSPEC EBA KIT 1 1379053 Electro Black Ace

HB 640 ALSPEC EFW KIT 1 1379159 Electro Flat White

HB 640 ALSPEC EDB KIT 1 1379160 Electro Dark Bronze

HB 640 ALSPEC EMB KIT 1 1379187 Electro Medium Bronze

Please note: The model HB 640 denotes key + turn both sides. This model would only be used for any entry door as key is needed with every use.

Key Cylinders are additional. Add H+B 42mm Cylinder. See page 25.

HB 642 MODEL KEY + SNIB INSIDE ONLY. PLAIN FLUSH PULL TO OUTSIDE







Most popular –The model HB 642 denotes key + turn inside only with plain pull to outside. Can be snib locked from inside and dead-bolted using key when needed.


HB 643 MODEL KEY + SNIB INSIDE ONLY, NOTHING TO OUTSIDE. GREAT FOR WINDOWS OR JULIETTE BALCONIES.







The model HB 643 denotes key + turn inside only, nothing to the outside. Can be snib locked form the inside and dead-bolted using key when needed.


Designed and manufactured in New ZealandKIT 1: PROGLIDEKit 1 can be used on the below sections

Meeting Stiles

Corner Stiles

AD946

AD927

AD928

AD748

AD776

AD708

AD946

AD771

AD770

AD712

AD927

AD928

HB 640

HB 642

HB 643

NO FLUSH PULL

page 6 page 7

HB 640 HB 642 HB 643

KIT 2: PROGLIDE LOCKSTILES

page 8 page 9










Note: Alspec adjustable strike, this is not the standard HB641.






















Lockstiles

Lockstiles Jambs

AD795

AD795

AD851

AD841

AD795

AD841

AD851

AD922

AD862

AD704

HB 640

HB 642

HB 643

NO FLUSH PULL

page 10 page 11

HB 630 HB 632 HB 633

KIT 3: PROGLIDE WIDE LOCKSTILES

page 12 page 13
































Wide Lockstiles

Lockstiles Jambs

AD803

AD841

AD851

AD803

AD803

AD841

AD851

AD889

AD866

HB 630

HB 632

HB 633

NO FLUSH PULL

page 15

HB 640 HB 642 HB 643

KIT 4: HAWKESBURY TOP HUNG +

SWAN EVO TOP HUNG

page 16 page 17

HS115

HS215

HS116

HS216




























Designed and manufactured in New ZealandKIT 4: HAWKESBURY TOP HUNG + SWAN EVO TOP HUNGKit 4 can be used on the below sections

Lockstiles

Meeting Stiles

Corner Stiles

SE22AD88

AD89

AD89

AD88SE422

HS115

HS215

HS117

HS217

HB 640

HB 642

HB 643

NO FLUSH PULL

page 18 page 19

HB 630 HB 632 HB 633 W

IDE LOCKSTILES

KIT 5: HAWKESBURY TOP HUNG +

SWAN EVO TOP HUNG

page 20 page 21




























Designed and manufactured in New ZealandKIT 5: HAWKESBURY TOP HUNG + SWAN EVO TOP HUNGKit 5 can be used on the below sections

Wide Lockstiles

SE32

SE432

AD88

AD89

AD89

AD88

HB 630

HB 632

HB 633

NO FLUSH PULL

page 23

KEY CYLINDERS FOR KITS 1-5 Please note: For all H+B sliding lock systems you need to add in the matching/relevant key cylinder and finish

Important: Cylinder is additional and unique to different kits and HB locks.

Our cylinders are supplied same key #number per 10 cylinders of any ONE type (eg single vs double. Anything beyond this will be supplied with different keying. If you require a project beyond 10 cylinders or a mix of single cylinders vs double we are able to re-key to one key. This will take 3-4 working days and there will be an additional charge for this. Please see Alspec for more details on pricing.

FOR KIT 1, KIT 2 & KIT 3 STANDARD LENGTH – 3PIN CYLINDERS

Use below cylinders for:Kit 1 – Narrow 70mm Proglide Meeting Together & Corner Meeting Kit 2 – Narrow 70mm Proglide Jamb Close Kit 3 – Wide 109mm Proglide Jamb Close

H+B CODE ALSPEC CODE SATIN CHROME – FOR SC & EFW LOCK FINISHES

CLF1004021 1378834 Key one side only 3PIN 32mm 1/2 Key Cylinder SC

CLF1004020 1378840 Key both sides 3PIN 42mm Double Key Cylinder SC

H+B CODE ALSPEC CODE DARK BRONZE – FOR EDB & EMB LOCK FINISHES

CLF4024 BRONZE 1374453 Key one side only 3PIN 32mm 1/2 Key Cylinder - BRONZE

CLF4023 BRONZE 1378854 Key both sides 3PIN 42mm Double Key Cylinder - BRONZE

H+B CODE ALSPEC CODE BLACK – FOR EBA LOCK FINISH

CLF4014 BLACK 1378838 Key one side only 3PIN 32mm 1/2 Key Cylinder - BLACK

CLF4020 BLACK 1378845 Key both sides 3PIN 42mm Double Key Cylinder - BLACK

FOR KIT 4 & KIT 5 LONGER LENGTH – 3PIN CYLINDERS

Use below cylinders for: Kit 4 – Narrow 70mm Hawkesbury Top Hung Swan Evo Kit 5 – Wide 109mm Hawkesbury Top Hung Swan Evo

H+B CODE ALSPEC CODE SATIN CHROME – FOR SC & EFW LOCK FINISHES

CLF 48 S SATIN 1378839 Key one side only 3PIN 35mm 1/2 Key Cylinder SC

CLF 48 D SATIN 1378841 Key both sides 3PIN 48mm Double Key Cylinder SC

H+B CODE ALSPEC CODE DARK BRONZE – FOR EDB & EMB LOCK FINISHES

CLF 48 S BRONZE 1378855 Key one side only 3PIN 35mm 1/2 Key Cylinder - BRONZE

CLF 48 D BRONZE 1378856 Key both sides 3PIN 48mm Double Key Cylinder - BRONZE

H+B CODE ALSPEC CODE BLACK – FOR EBA LOCK FINISH

CLF 48 S BLACK 1378844 Key one side only 3PIN 35mm 1/2 Key Cylinder - BLACK

CLF 48 D BLACK 1378846 Key both sides 3PIN 48mm Double Key Cylinder - BLACK

page 24 page 25

FLUSH + END PULLSFLUSH PULLSHB 650: Flush Pull, 36mm x 105mm

HB 660: Flush Pull, 36mm x 170mm

HB 670: Same dimensions as HB 660 but with an increased recess depth of 15mm

HB 665: Flush Pull, 36mm x 250mm with full length recess

HB 668: Flush Pull, 36mm x 250mm with recess to match Flush Pulls on HB 630 & HB 640 sets

HB 1470: Large Flush Pull in solid brass, 50mm x 310mm

END PULLSHB 680: Button-Activated End Pull, 20mm x 170mm

HB 685: Button-Activated End Pull Large, 23mm x 220mm

page 26 page 27

HB 650 MODEL H+B CODE DESCRIPTION ALSPEC CODE FINISH

HB 650 SC Flush Pull, 36mm x 105mm 1379220 Satin Chrome

HB 650 EBA Flush Pull, 36mm x 105mm 1379221 Electro Black Ace

HB 650 EFW Flush Pull, 36mm x 105mm 1379222 Electro Flat White

HB 650 EDB Flush Pull, 36mm x 105mm 1379223 Electro Dark Bronze

HB 650 EMB Flush Pull, 36mm x 105mm 1379224 Electro Medium Bronze


HB 660 SC Flush Pull, 36mm x 170mm 1378873 Satin Chrome

HB 660 EBA Flush Pull, 36mm x 170mm 1378869 Electro Black Ace

HB 660 EFW Flush Pull, 36mm x 170mm 1378907 Electro Flat White

HB 660 EDB Flush Pull, 36mm x 170mm 1378865 Electro Dark Bronze

HB 660 EMB Flush Pull, 36mm x 170mm 1378861 Electro Medium Bronze


HB 665 SC Flush Pull, 36mm x 250mm with full length recess 1378875 Satin Chrome

HB 665 EBA Flush Pull, 36mm x 250mm with full length recess 1378871 Electro Black Ace

HB 665 EFW Flush Pull, 36mm x 250mm with full length recess 1378911 Electro Flat White

HB 665 EDB Flush Pull, 36mm x 250mm with full length recess 1378867 Electro Dark Bronze

HB 665 EMB Flush Pull, 36mm x 250mm with full length recess 1378863 Electro Medium Bronze


HB 668 SC Flush Pull, 36mm x 250mm with recess to match Flush Pulls on HB 630 & HB 640 sets 1378835 Satin Chrome

HB 668 EBA Flush Pull, 36mm x 250mm with recess to match Flush Pulls on HB 630 & HB 640 sets 1378872 Electro Black Ace

HB 668 EFW Flush Pull, 36mm x 250mm with recess to match Flush Pulls on HB 630 & HB 640 sets 1378912 Electro Flat White

HB 668 EDB Flush Pull, 36mm x 250mm with recess to match Flush Pulls on HB 630 & HB 640 sets 1378868 Electro Dark Bronze

HB 668 EMB Flush Pull, 36mm x 250mm with recess to match Flush Pulls on HB 630 & HB 640 sets 1378864 Electro Medium Bronze


HB 670 SC Same dimensions as HB 660 but with an increased recess depth of 15mm 1378874 Satin Chrome

HB 670 EBA Same dimensions as HB 660 but with an increased recess depth of 15mm 1378870 Electro Black Ace

HB 670 EFW Same dimensions as HB 660 but with an increased recess depth of 15mm 1378908 Electro Flat White

HB 670 EDB Same dimensions as HB 660 but with an increased recess depth of 15mm 1378866 Electro Dark Bronze

HB 670 EMB Same dimensions as HB 660 but with an increased recess depth of 15mm 1378862 Electro Medium Bronze


HB 1470 SC Large Flush Pull in solid brass, 50mm x 310mm 1378984 Satin Chrome

HB 1470 EBA Large Flush Pull in solid brass, 50mm x 310mm 1378986 Electro Black Ace

HB 1470 EFW Large Flush Pull in solid brass, 50mm x 310mm 1378989 Electro Flat White

HB 1470 EDB Large Flush Pull in solid brass, 50mm x 310mm 1378987 Electro Dark Bronze

HB 1470 EMB Large Flush Pull in solid brass, 50mm x 310mm 1378986 Electro Medium Bronze

Designed and manufactured in New Zealand

15

50

310

HB 660

HB 665

11

36

250

HB 668

11

36

250

36

17016

HB 670

105

36

13

HB 650

17011

36

HB 1470

15

50

310

HB 660

HB 665

11

36

250

HB 668

11

36

250

36

17016

HB 670

105

36

13

HB 650

17011

36

HB 1470

15

50

310

HB 660

HB 665

11

36

250

HB 668

11

36

250

36

17016

HB 670

105

36

13

HB 650

17011

36

HB 1470

15

50

310

HB 660

HB 665

11

36

250

HB 668

11

36

250

36

17016

HB 670

105

36

13

HB 650

17011

36

HB 1470

15

50

310

HB 660

HB 665

11

36

250

HB 668

11

36

250

36

17016

HB 670

105

36

13

HB 650

17011

36

HB 147015

50

310

HB 660

HB 665

11

36

250

HB 668

11

36

250

36

17016

HB 670

105

36

13

HB 650

17011

36

HB 147015

50

310

HB 660

HB 665

11

36

250

HB 668

11

36

250

36

17016

HB 670

105

36

13

HB 650

17011

36

HB 1470

HB 650

HB 660

HB 665

HB 670

HB 668

HB 1470

page 29page 28

HB 680 HB 685

H+B BUTTON ACTIVATED END PULLS35

35

3

170100

49 19 20

72HB 680

150

54 33 23

220

35

35

4.3

124

HB 685

HB680

HB685

page 30 page 31

Designed and manufactured in New Zealand

HB 680 HB 685

HB 680 MODEL HB 680 BUTTON ACTIVATED END PULL X 1 HBALMT ALSPEC LOCK MOUNTING TAB X 2

H+B CODE DESCRIPTION ALSPEC CODE FINISH

HB 680 ALSP LMT SC Button-Activated End Pull, 20mm x 170mm 1379080 Satin Chrome

HB 680 ALSP LMT EBA Button-Activated End Pull, 20mm x 170mm 1379083 Electro Black Ace

HB 680 ALSP LMT EFW Button-Activated End Pull, 20mm x 170mm 1379089 Electro Flat White

HB 680 ALSP LMT EDB Button-Activated End Pull, 20mm x 170mm 1379084 Electro Dark Bronze

HB 680 ALSP LMT EMB Button-Activated End Pull, 20mm x 170mm 1379085 Electro Medium Bronze

HB 685 MODEL HB 680 BUTTON ACTIVATED END PULL LARGE X 1 HBALMT ALSPEC LOCK MOUNTING TAB X 2

H+B CODE DESCRIPTION ALSPEC CODE FINISH

HB 685 ALSP LMT SC Button-Activated End Pull Large, 23mm x 220mm 1379090 Satin Chrome

HB 685 ALSP LMT EBA Button-Activated End Pull Large, 23mm x 220mm 1379093 Electro Black Ace

HB 685 ALSP LMT EFW Button-Activated End Pull Large, 23mm x 220mm 1379099 Electro Flat White

HB 685 ALSP LMT EDB Button-Activated End Pull Large, 23mm x 220mm 1379094 Electro Dark Bronze

HB 685 ALSP LMT EMB Button-Activated End Pull Large, 23mm x 220mm 1379095 Electro Medium Bronze

AD795

SE22

LOCK STILES

MEETING STILES

WIDE STILES

WIDE STILES

AD927 AD803

SE32

AD803

SE32

page 32 page 33

FOR ANY NOTES, DRAWINGS OR SKETCHES...

page 34

Halliday + Baillie Pty LtdAustralian Head OfficeGround Floor, 45 Chippen Street, Chippendale, NSW 2008Phone: +61 2 9699 3330 | Fax: +61 2 9699 3660Email: [email protected]

HEAD OFFICE | 3 Alspec Place, Eastern Creek, NSW 2766Phone: 02 9834 9500 | Fax: 02 9834 9532 | [email protected]

ALUSPACE | 235 Commonwealth Street, Surry Hills, NSW 2010Phone: 1300 ALUSPACE | [email protected]

Call 1300 ALSPECalspec.com.au

Design and print by theurbanpress.com.au

SYDNEY BRANCH3 Alspec PlaceEastern Creek, NSW 2766Phone: 02 9834 9500Fax: 02 9834 [email protected]

CAIRNS BRANCH11 Southgate CloseWoree, QLD 4868Phone: 07 4037 6666Fax: 07 4037 [email protected]

TOWNSVILLE BRANCH21 Carroll StreetMount Louisa, QLD 4814Phone: 07 3089 4965Fax: 1300 131 [email protected]

NEWCASTLE BRANCH95 Griffiths RoadLambton, NSW 2299Phone: 02 4952 9111Fax: 02 4952 [email protected]

BRISBANE BRANCH8-22 Jutland StreetLoganlea, QLD 4131Phone: 07 3089 4900Fax: 07 3089 [email protected]

MELBOURNE BRANCH26-40 Pound Road WestDandenong South, VIC 3175Phone: 03 8787 6333Fax: 03 8787 [email protected]

PERTH BRANCH30 Holder WayMalaga, WA 6090Phone: 08 9209 9100Fax: 08 9209 [email protected]

ADELAIDE BRANCH1 Pope CourtBeverley, SA 5009Phone: 08 8150 6960Fax: 08 8150 [email protected]

DARWIN BRANCH25 Bishop StreetWoolner, NT 0820Phone: 08 8941 7300Fax: 08 8941 [email protected]

CREATING CLASSICS - alspec.com.au · Halliday + Baillie sliding door hardware is available in the...

Documents

Transcript of CREATING CLASSICS - alspec.com.au · Halliday + Baillie sliding door hardware is available in the...