Creating a Ribbon in Adobe Illustrator
-
Upload
joana-pinheiro -
Category
Documents
-
view
218 -
download
0
Transcript of Creating a Ribbon in Adobe Illustrator
8/7/2019 Creating a Ribbon in Adobe Illustrator
http://slidepdf.com/reader/full/creating-a-ribbon-in-adobe-illustrator 1/5
Creating a ribbon in Adobe Illustrator
2006 at 06.33 pm posted by Veerle Pieters
Ever wondered how you draw a ribbon in Adobe Illustrator? A while ago a reader e-mailed
me with this question. A prefect tip for a step-by-step tutorial, I hope you enjoy it :)
S T E P 1 - D R A W T H E F I R S T P A R T O F T H E R I B B O N
A basic knowledge on how to use the pen tool and how to draw bezier curves is needed to
get started with this tutorial.
Draw a curved line that looks similar to the illustration above. Hold down the shift key while
dragging the handles in the last point of the curved line. Drag a vertical guide onto the
curved line as shown in the picture above. To make it snap to the exact position, make sure
that Smart Guides is checked (View > Smart Guides or command/control + U).
S T E P 2 - B R E A K T H E C U R V E I N T O 2 P A R T S
Because we'll have to apply different shades and we need to create depth into the ribbon, we
need to cut the ribbon into different segments.
Select the Scissors Tool and click on the location on the path as shown in the picture above.
With the Smart Guides active you'll get the 'intersect' text when your cursor is at the right
spot. Now the path is cut into 2 segments. Select both segments, hold down the shift +
option/alt key and drag/copy the paths vertically as shown in the picture above.
8/7/2019 Creating a Ribbon in Adobe Illustrator
http://slidepdf.com/reader/full/creating-a-ribbon-in-adobe-illustrator 2/5
S T E P 3 - C L O S E T H E P A T H S
Close the paths as shown in the picture below, so the ribbon exists of 2 segments. Select
both segments, select the Rotate Tool and click while holding down the alt/option on the
location as shown below in the picture, enter 180° and click the Copy button.
S T E P 4 - R O T A T E A N D D U P L I C A T E T H E 2 S E G M E N T S O F T H E R I B B O N
Advanced users will probably just click on the exact location, hold down the alt/option and
shift key while dragging the segment to the correct location as show in the picture below.
Chances are that both segments don't perfectly match. Select the 2 new segments, zoom in,
and drag them to the exact location. With Smart Guides still checked it'll snap and you'll seethe word 'origin' appearing.
S T E P 5 - M E R G E T H E M I D D L E S E G M E N T S O F T H E R I B B O N I N T O 1 S E G M E N T
Select the 2 middle segments of the ribbon and click on the "Add to shape" option in the
Pathfinder palette. This way Illustrator will treat these parts of the ribbon as 1 object which
will make it easier when we give this segment a fill.
8/7/2019 Creating a Ribbon in Adobe Illustrator
http://slidepdf.com/reader/full/creating-a-ribbon-in-adobe-illustrator 3/5
S T E P 6 - G I V I N G T H E R I B B O N S E G M E N T S A G R A D I E N T F I L L
Our ribbon is now divided into 3 segments. All we need to do now is give each segment its
own fill. To add dimension and depth we need to use a different (linear) gradient on each
segment:
First segment gradient consists of : 50% cyan and 7% magenta, 32% cyan and 4%
magenta, then again 50% cyan and 7% magenta followed by 69% cyan and 10% magenta.
8/7/2019 Creating a Ribbon in Adobe Illustrator
http://slidepdf.com/reader/full/creating-a-ribbon-in-adobe-illustrator 4/5
Second segment gradient consists of the following swatches : 67% cyan and 15% magenta,
50% cyan and 7% magenta, then 23% cyan followed by 31% cyan and 5% magenta.
Last segment gradient consists of : 50% cyan and 7% magenta, then again 50% cyan and
7% magenta followed by 31% cyan and 5% magenta.
You probably have to use 'Send to back' or 'Bring to front' on the different segments to get
them into the correct perspective.
S T E P 7 - F I N E T U N I N G T H E C E N T E R E D C U R V E O F T H E R I B B O N
As you probably have notice, the curve in the center doesn't look that natural. That's
because I drew that part holding down the shift key, but this was needed to make sure the
rotated ribbon would match perfectly on the original one. I can correct this very easily, but
first I need to expand the 2 merged segments. Select both segments and click 'Expand' in
the Pathfinder palette. This way the vertical line connecting the 2 segments disappear and
8/7/2019 Creating a Ribbon in Adobe Illustrator
http://slidepdf.com/reader/full/creating-a-ribbon-in-adobe-illustrator 5/5
we have only 2 bezier points left. Now it's a matter of dragging the handles into the
preferred position to smooth the curve of the ribbon.
Ah! Much better don't you think? :)