Created World Class. - Satyapur Steel

www.satyapursteel.com

Since 1983

(AN ISO 9001 : 2008 CERTIFIED CO.)

India, USA, Europe, Africa, Middle East, South East Asia and Australia

1

Created World Class.

Served World Class.

A customer base extending Across the Globe


Since 1983


2

SATYAPUR STEEL establishment since 1983 is a force to reckon with in the

eld of Importing, Exporting stockholding and Supplying of Stainless Steel,

Duplex Stainless Steel, Carbon Steel, Alloys Steel.

SATYAPUR STEEL has drawn together under the one roof of the total

spectrum of trading, stockholding and processing activities in Stainless Steel,

Lead in the shape of Sheets, Plates, Coils, Patta, Strips, Pipes, Tubes, Rods,

Wires, Angles and the entire range of Pipes Fittings such as BW / SW / Screwed /

Forged & Compression type with ferrules such as elbow, Tees, Reducers,

Stubends, Flanges, Unions, Caps, Nipples, Couplings, Elbowlets, Weldolets,

Nuts, Bolts, Studs, Washers AISI 304, 304L, 316, 316L, 310, 321 & 410 Quality in

all size & also Duplex Stainless Steel, Carbon Steel, M. S. & Alloy Steel supplying

to various core industries like :

• Pharmaceuticals

• Food & Beverages

• Chemicals & Fertilizers

• Pressure Vessel

• Automobile Industries

• Sugar Industries

• Power Plant

• Paper & Pulp Industries

• Oil & Gas Industries

• Heat Exchange

Right product for the right requirement at the right price, i.e. rather than a mere

supplier of the product we take utmost efforts in understanding the client’s

requirement, identifying the right product at the right price.

Company Profile

Co

mp

an

y P

ro

file


Since 1983


3

Strict Quality Assurance system is being followed in all our departments

and Total Quality Management is applied to streamline all the

procedures and practices in operation to achieve high standard of

efciency. Continuous efforts are being made for improvement of

materials technology and equipments to give best quality products at

the most affordable prices. The quality assurance dept. overseas all

important quality functions and performs the following activities.

• The system controls the quality of all incoming materials as per the

raw material test certicate of the material. Randomly checking in

each size for chemical and physical properties at government

approved laboratory.

• Suitable xtures and templates are used to maintain dimensional

accuracy necessary gauges and callipers are calibrated periodically

to maintain their accuracy.

• Products are supplied with test certicate as per approved QAP.

Test Certicates incorporate chemical composition, mechanical

properties hardness details of heat treatment, Ultrasonic test,

Radiography test and stamping details.

Quality Policy

CERTIFICATE OF REGISTRATION


Since 1983


4

STAINLESS STEEL PRODUCTS


Since 1983


5

STAINLESS STEEL SHEETS / PLATES /2B/BA/MAT PVCAISI-304, 304L, 316, 316L, 317L,309,310, 409, 410, 420,430

STAINLESS STEEL COILS / 2B / BA / MAT PVC AISI-304, 304L, 316, 316L, 317L, 309, 310, 409, 410, 420,430.

STAINLESS STEEL FLATS / STRIPS / PATTAAISI-304, 304L, 316, 316L, 309, 310, 321, 409, 410, 420, 430.

STAINLESS STEEL CIRCLEAISI-304, 304L 316, 316L, 321, 309, 310, 409, 410, 420,430.

STAINLESS STEEL ROUND, HEX, SQUARE AISI-304, 304L, 316, 316L 321, 310 410, 420, 430 QUALITY.

STAINLESS STEEL WIREAISI-304, 304L, 316, 316L, 321,309, 310, 202 QUALITY

STAINLESS STEEL TUBES / PIPES, SEAMLESS / ERW GAUGES PIPE & SCHEDULE PIPES AISI-304, 304L, 316, 316L, 310, 321 QUALITY.

STAINLESS STEEL FITTINGS ELBOWS, BENDS,STUBENDS, REDUCER, TEES, FLANGES & OTHERPIPE FITTING 304, 304L, 316, 316L, 321, 310, 202.

S.S. PIPE ERW SQUARE / BEDA / (OVAL) 304 / 202.

STAINLESS STEEL FASTNER WIRE, HEX, BAR ,NUTS

BRASS, COPPER, PHOSPHOR-BRONZE& ALUMINIUM SHEET, PLATES & COILS

BRASS, COPPER, PHOSPHOR-BRONZE &ALUMINUM RODS, ROUND, HEX & SQUARE .

BRASS, COPPER, ALUMINIUM FLATS

BRASS, COPPER, ALUMINIUM TUBES

REFRIGERATION & AIR-CONDITIONING COPPER TUBES ANNEALED & PVC COATED

GUNMETALS, PHOSPHER-BRONZE ALUMINIUM BRONZE & C.I. CASTINGS.

1000 x 2000, 1000 x 2500, 1250 x 2500, 1500 x 3000, 2000 x 4000 mm SIZE x 0.1 mm TO 3 mm & 1/8" To 2" THICK

0.1 mm To 1 mm THICKNESS x 1/2" To 24" Width in COIL1mm To 10 mm THICKNESS x 1000 To 2000 mm Width in COIL

1/2" To 24" Width0.1 mm To 0.9 mm & 1 mm to 50 mm THICKNESS

4" dia To 100" dia x 3 mm to 50 mm THICKNESS

3 mm To 200 mm dia ROUNDS10 mm To 50 mm SQUARE & HEX

0.1 mm To 3 mm dia in COIL

22, 20, 19, 18, 16, 14, 12, 10 SWG WALL THICKNESS1/4" O/D To 12" O/D & 1/2" NB To 24 NB, Sch 5, 10, 20, 40, 80 & 160 FULL LENGTH 6 Mtr & CUTT LENGTH

AS PER YOUR DRAWING & REQUIREMENT

1/2" x 1/2" To 4" x 4" & 1 mm to 3 mm THICKNESS

AS PER YOUR DRAWING & REQUIREMENT

8' x 4', 4' x4', 4' x2', 14" x 48", 12" x 48" in SIZE &0.1 mm To 2.5 mm & 1/8" To 1" THICKNESS

1/8" To 8" dia Round1/4" To 3" Hex & Squares.

1/4" Width to 6" Width & 1/16" to 1" THICKNESS

1/8" OD To 8" OD & 1 mm To 3 mm THICKNESS

CAPILLARY TUBES : 1/64" To 1/8" OD IN COIL OF 100 ft.1/8" TO 3/4" O/D IN COIL OF 50 ft & 25 ft.

PHOSPHER BRONZE, GUNMETAL RODS, BUSHINGS,HOLLOW BARS BSS 369 & 85 / 5 / 5 / 5

PURE TIN, LEAD, ZINC, ANTIMONY, CADMIUM, BISMUTH, TITANIUM, MOLYBDENUM, MONELINCONEL & HEST ALLOYS, NICKEL & WELDING RODS 304, 304L, 316, 316L, 309, 310 ETC.

SUMMARY OF ITEMS AVAILABLE FROM READY STOCKFERROUS & NON FERROUS METALS MERCHANT


Since 1983


6

Widely used, corrosion resistant, heat resistant, good mechanical properties in low temperature, no heat treatment hardening, weak magnetism.

Better intergranular corrosion resistance, can be heat treated after welding.

Low content of Cr and N than 304 grade, It’s strength, hardness and magnetism can be increased by cold working.

Improving, intergranular corrosion resistance by decreasing content and increasing N content from 301 grade.

Better formability than 304 grade by addition of cu, suitable for deep drawing.

Better formability than 304 grade by increasing Ni content, suitable for deep drawing.

Better formability than 304 grade by increasing Ni Content, suitable for deep drawing.

Better formability than 304 grade in sea water and other corrosive solutions, higher heat-resistance, good cold work hardening and performance, no magnetism.

Compare with SUS316, has better intergnanular corrosion resistance and water heat-resistance, no magnetism.

Intergranular corrosion resistance, heat resistant, heat resistant, good formability and weldability, anti-oxidizing in high temperature.

Typical ferritic, stainless steel grade, low thermal extensibility, good formability and antioxygenic property.

good formability and weldability, antioxygenic property in high temperature.

good corrosion resistance, formability and weldability, corrosion resistant to condensat3es in exhaust piping of automobiles.

good corrosion resistance, formability and weldability, compare with 316L, has better stress corrosion resistance and spot corrosion resistance.

High post-quenching strength, suitable for wearable parts.

Home Kitchen utensils, industry, medical apparatus, building material and decoration.

Petroleum equipment, chemical equipment, building material, heat resistant parts and the parts are difficult to heat treatment.

Trains, aircrafts, vehicles, springs.

Frame and crust parts of train.

Domestic appliances.



Chemical industry, food processing equipments, coastal installations.

Chemical industry, food processing equipments used in severe corrosive condition, costal installations used.

jet engine parts, heat exchanger, boiler cover, chemical devices.

Heat-resistance utensils, combustion devices, domestic appliance, kitchen utensils category, building decorating material.

exhaust system of automobiles

Automobiles exhaust piping, boiler.

Water heater, water tank, automobile, exhaust piping.

Knife, pipe nozzles, valves, metal rules and cooking utensils.

Series Grades Characteristics Applications

AusteniticSeries

Basic

SUS 304

FerreticSeries

MartensiteSeries

SUS 304L

SUS 301

SUS 301L*

SUS 304Cu

SUS 304Ni8.5

SUS 304Ni9

SUS 316*

SUS 316L

SUS 321

SUS 430

SUS 409L

SUS 436L*

SUS 444*

SUS 420J2*Basic

Weldedand

CorrosionResistant

Basic

HighCorrosion

Resistance

DeepDrawing

Hightensile

Strength

Stainless Steel Sheets/Plates Product Characteristics & Applications


Since 1983


8

NOMINAL CHEMICAL COMPOSITION, % (not for specification purposes)

� NI� C� Mn� Fe� S� Si� Cu� Cr� Co� Mo� Ai� Ti� Other

Nickel�200� 99.5� 0.08� 0.18� 0.2� 0.005� 0.18� 0.13� -� -� -� -� -� -

Nickel 201� 99.5� 0.01� 0.18� 0.2� 0.005� 0.18� 0.13� -� -� -� -� -� -

Nickel 205� 99.5� 0.08� 0.18� 0.10� 0.004� 0.08� 0.08� -� -� -� -� 0.03� Mg 0.05

Nickel 212� 97.7� 0.10� 2.0� 0.05� 0.005� 0.05� 0.03� -� -� -� -� -� -

Nickel 222� 99.5� 0.01� 0.02� 0.04� 0.0025� 0.01� 0.01� 0.01� 0.06� -� 0.01� 0.01� Mg 0.08

Nickel 270� 99.98� 0.01� 0.003� <0.001� <0.001� <0.001� <0.001� <0.001� <0.001� -� -� <0.001� Mg<0.001

MONEL alloy400� 63.0min� 0.15� 1.0� 25max� 0.024max� 0.05max� 31.0� -� -� -� -� 0.6� -

MONEL k alloy500� 63.0min� 0.15� 1.5max� 2.0max� 0.010max� 0.5� 30.0� -� -� -� 2.9� 0.01max� -

Cast MONEL alloy� 63.0min� 0.07� 0.75� 2.5max� 0.02max� 0.04max� 30.0� 0.10max� -� 0.20max� 0.05max� 0.01max� -

Cast MONEL alloy� 63.0min� 0.03max� 0.20max� 2.5max� 0.02max� 0.04max� 30.0� 0.10� -� 0.20max� 0.05max� -� -

INCOLOY alloy625� 72.0min� 0.15min� 1.0min� 8.0� 0.015max� 0.05max� 0.5max� 15.5� -� -� -� 0.25� Nb + Tav

INCOLOY alloy625� 60.5� 0.10max� 0.25� 5.0max� 0.015max� 0.5max� -� 21.5� -� 9.0� 0.25� 0.38� 3.65

INCOLOY alloy800� 32.5� 0.10max� 1.5max� Bal.� 0.015max� 1.0max� 0.75max� 21.0� -� -� 0.38� 0.9� -

INCOLOY alloy825� 42.0� 0.05max� 1.0max� Bal.� 0 .03max� 0.5max� 2.25� 21.5� -� 3.0� 0.20max� 1.6� -

INCOLOY alloy904� 32.5� 0.025� 0.025� Bal.� 0.015max� 0.25� 0.25� -� 14.5� -� 0.1� 0.20� -

INCOLOY alloyDS� 37.0� 0.2� 1.2� Bal.� -� 2.3max� 2.3max� 18.0� -� -� -� -� -

Hastelloy B� Rest/Ba� 0.10� 0.80� 5.5� 0.7� -� 0.6� 1.25� 2.8� -� -� -� -

Hastelloy C� Rest/Ba� 0.07� 0.80� 5.75� 0.7� -� 16.0� 1.25� 17� -� -� -� -

Hastelloy G� Rest/Ba� 0.05� 1.0-2.0� 18.0-21.0� 0.7� -� 1.5� 1.25� 5.575� -� -� -� -

Alloy� Rest/Ba� -� -� -� -� -� 21-23.5� -� -� -� -� -� -

� Density� Melting rate� Specific heat� Terminal� Terminal� Electrical� Tensile� Hardness2 0� Kg/mm � C� at 20 C� Conductivity� expansion� resistivity� strength� HV

0 0 3�� J/Kg C� at 20 C� 10-c/C� at 20 C� N/mm

Nickel 200� 8.89� 1435-1445� 456� 74.9� 13.3� 9.5� 380-550� 90-120

Nickel 201� 8.89� 1435-1445� 456� 79.2� 13.3� 7.6� 340-420� 75-100

Nickel 205� 8.89� 1435-1445� 456� 74.9� 13.3� 9.5� 340� 77

Nickel 212� 8.89� 1435-1445� 430� 44.1� -� 10.9� 476� 144

Nickel 222� 8.89� 1435-1445� 456� 74.9� 13.3� 8.8� 340� 77

Nickel 270� 8.89� 1435-1445� 460� 85.7� 13.3� 7.5� 340� 80

MONEL alloy 400� 8.83� 1300-1350� 419� 21.7� 14.1� 51.0� 480-620� 111-151

MONEL alloy K 500� 8.46� 1315-1350� 419� 17.4� 13.7� 61.4� 620-760� 141-189

INCONEL alloy 600� 8.42� 1370-1425� 461� 14.8� 13.3� 103� 550-690� 121-173

INCONEL alloy 625� 8.44� 1290-1350� 410� 9.8� 12.8� 129� 830-1040� 146-247

INCONEL alloy 800� 7.95� 1355-1385� 502� 11.7� 14.2� 99� 520-700� 121-180

INCONEL alloy 825� 8.24� 1370-1400� 441� 10.9� 14.0� 113� 590-730� 121-183

INCONEL alloy 904� 8.12� -� 442� 14.9� 4.6� 72� 923� -

INCONEL alloy DS� 7.92� 1330-1400� 452� 12.0� 14.2� 108� 680� 208�

NICKEL ALLOYS


Since 1983


7

AUSTENTIC STAINLESS STEEL

AISI C Mn P S Si Cr Ni Mo Other

Grade W.Nr. Max Max Max Max Max Element I.S. En-

201 1.4372 0.15 5.5/7.5 0.06 0.03 1 16.0/18.0 3.5/5.5 - - - -

202 1.4371 0.15 7.5/10 0.06 0.03 1 17.0/19.0 4.0/6.0 - - - -

201 PNI3 - 0.10 7.5-10.0 0.10 0.03 1 14.0/15.0 3.0 - Cu-1.5-2N-0.2

203 - 0.08 5.0-.5 0.04 0.18/0.35 1 16.0/18.0 5.0/6.5 0.50 Cu-1.75-2.25

204 CU - 0.15 6.5-9.0 0.06 0.03 1 15.5/17.5 1.5-3.5 - Cu-2-4 N-0.05-0.25 - -

301 1.4310 0.15 2.0max 0.045 0.040 1.0 16.0/18.0 6.0/8.0 - - 10Cr17Ni7 -

302 1.3410 0.15 2.0 0.045 0.030 1.0 17.0/19.0 8.0/10.0 - E-4-3-4% 07Cr18Ni9 En-58A

302HQ 1.4567 0.03 2.0 0.045 0.03 1 17.0/19.0 9.0/10.0 - CU:3-4.0 - -

303 1.4305 0.15 2.0 0.045 0.15min 1.0 17.0/19.0 8.0/10.0 - E-4-1%Max 15Cr18Ni9 En-58M

303 CU - 0.15 2.0 0.20 0.15 1 17.0/19.0 8.0/1.0 - Cu-1.5-3.5

304 CU2 - 0.045 2.0 0.045 0.03 1 18.0/20.0 8.0-10.5 - Cu-2.3-3.0 - -

304 1.4301 0.08 2.0 0.045 0.030 1.0 18.0/20.0 8.0/10.0 - - 04Cr18Ni10 En-58E

304L 1.4307 0.030 2.0 0.045 0.030 1.0 18.0/20.0 8.0/12.0 - - 02Cr18Ni11 -

304LN 1.4331 0.03 2.00 0.045 0.03 1 18.0-20.0 8.0-10.5 - N-0.10-0.15 - -

304H 0.05 2.0 0.045 0.03 1 18.0/20.0 8.5/9.5 - CU:2-2.50 - -

308 1.4303 0.08 2.0 0.040 0.030 1.0 18.0/21.0 10.0/12.0 - - - -

309 1.4829 0.20 2.0max 0.045 0.030 1.0 22.0/24.0 12.0/15.0 - - 20Cr24Ni12 -

309LER 0.03 1.5/2.5 0.02 0.015 0.5 23.0/25.0 12.0/14.0 - - - -

309S 1.4833 0.08 2.0 0.045 0.030 1.0 22.0/24.0 12.0/15.0 - - - -

310 1.4845 0.25 2.0 0.045 0.030 1.50 24.0/26.0 19.0/22.0 - - 10Cr25Ni12 -

310S 1.4845 0.08 2.0 0.045 0.030 1.50 24.0/26.0 19.0/22.0 - - - -

314 1.4841 0.25 2.0 0.040 0.030 1.5 25.0/26.0 19.0/22.0 - - - -

316 1.4401 0.08 2.0 0.045 0.030 1.0 16.0/18.0 10.0/14.0 2.0/3.0 - 04Cr17Ni12Mo2 En58H

316H - 0.04-0.10 2.0 0.045 0.030 1 16.0/18.0 10.0/14.0 2.0-3.0 - - -

316L 1.4404 0.030 2.0 0.045 0.030 1.0 16.0/18.0 10.9/14.0 2.0/3.0 - 03Cr17Ni12Mo2 -

316LN 1.4406 0.03 2.0 0.045 0.03 1 16.0-18.0 10.0/14.0 2.0-/3.0 N-0.10-0.30 - -

316Ti 1.4571 0.080 2.0 0.045 0.030 1.0 16.0/18.0 10.0/14.0 2.0/3.0 Ti5xCmin - -

317 1.4449 0.08 2.0 0.045 0.030 1.0 18.0/20.0 11.0/15.0 3.0/4.0 - - -

317L 1.4438 0.030 2.0 0.045 0.030 1.0 18.0/20.0 11.0/15.0 3.0/4.0 N:0,10/0.22 - -

317LN 0.03 2.0 0.045 0.03 1 18.0/20.0 11.0/15.0 3.0/4.0 N:0,10/0.22 - -

321 1.4541 0.08 2.0 0.045 0.030 1.0 17.0/19.0 9.0/12.0 - Ti5xCmin 04Cr18Ni10Ti20 En-58C

321H - 0.04-0.10 2.0 0.045 0.030 1 17.0/19.0 9.0/12.0 - Ti-4x(C+N)-0.70 - -

347 1.4550 0.08 2.0 0.045 0.030 1.0 17.0/19.0 9.0/12.0 - Nb/Ta10xCmin 04Cr18Ni10Nb-40 En-58G

FERRITIC

409m 1.4003 0.03 1.0 0.03 0.03 1.0 10.5/12.5 1 - Ti-0.75max - -

410 0.15 1.00 0.04 0.03 1.0 11.50/13.5 0.60 - - 12Cr13 En-56A

416 1.4005 0.15 1.25 0.06 0.15min 1.0 12.0/14.0 1.25/2.50 - - - -

420 1.4021 0.15min 1.0 0.04 0.03 1.0 12.0/14.0 0.06 - - - En-56C&D

430 1.4061 0.12 1.0 0.04 0.03 1.0 16.0/18.0 0.06 - - 07Cr17 En-60

430L 0.03 1.0 0.04 0.03 1.0 16.0/18.0 0.06 - - - -

430F 0.12 1.25 0.06 0.15min 1.0 16.0/18.0 0.60 - - - -

431 1.4057 0.2 1.0 0.04 0.03 1.0 15.0/17.0 1.25/2.5 - - - En-57

446 1.4749 0.02 1.5 0.04 0.03 1 23.0/27.0 0.6 - N-25

410S 1.4001 0.08 1.0 0.04 0.03 1 11.5/13.5 0.60 - - - -

440A 1.4109 0.6/0.7 1.0 0.04 0.03 1 16.0/18.0 - - - - -

440B 1.4112 0.75-0.95 1.0 0.04 0.03 1 16.9/18.0 - 0.75 - - -

440C 1.4125 0.95-1.2 1.0 0.04 0.03 1 16.9/18.0 - 0.75 - |-

DUPLEX

1905 0.03 1.2/1.8 0.04 0.03 1.2/2 18.0/19.0 4.3/5.2 2.5/3 N:0.5/0.10 - -

2205 0.03 2 0.03 0.02 1.0 21.0/23.0 4.5/6.5 2.5/3.5 N:0.8/0.20 - -

2506 0.08 1.0 0.04 0.03 0.75 26.0/28.0 4/5 1.3/2 - - -

Chemical Composition of Stainless SteelNr. Equ. Spec.


Since 1983


9

M.M. 3mm 5mm 6mm 8mm 10mm 12mm 16mm 20mm 25mm 32mm 40mm 50mm 65mm

12 0.09 0.15 0.18 0.24 0.29 - - - - - - - -

16 0.12 0.20 0.23 0.31 0.39 0.46 - - - - - - -

20 0.15 0.25 0.29 0.35 0.48 0.58 0.77 - - - - - -

25 0.19 0.31 0.37 0.49 0.61 0.74 0.96 1.20 - - - - -

� 30� 0.22� 0.37� 0.43� 0.58� 0.74� 0.86� 1.16� 1.44� 1.80� -� -� -� -

32 0.25 0.40 0.46 0.61 0.77 0.92 1.22 0.54 1.92 - - - -

40 0.28 0.49 0.58 0.77 0.95 1.16 1.53 1.93 2.40 3.07 - - -

50 0.37 0.61 0.74 0.95 1.19 1.44 1.93 2.38 2.99 3.83 427 - -

60 0.43 0.74 0.86 1.16 1.44 1.71 2.29 2.87 3.60 4.60 5.76 7.18 -

63 - 0.76 0.92 1.22 1.50 1.80 2.41 3.02 3.78 4.82 6.63 7.54 -

65 - 0.78 .95 1.25 1.56 1.86 2.50 3.11 3.91 4.97 6.22 7.78 -

75 - - 1.7 1.44 1.80 2.17 2.87 3.60 4.49 5.73 7.18 8.98 12.67

100 - - 1.44 1.93 2.38 2.87 3.85 4.79 5.98 7.66 9.58 11.97 16.63

125 - - 1.80 2.38 2.99 3.60 4.79 5.98 7.47 9.58 11.97 14.96 19.45

150 - - 2.16 2.88 3.60 4.30 5.73 7.20 8.100 11.50 14.36 17.95 23.33

175 - - 2.52 3.35 4.30 5.19 6.89 8.63 10.76 13.78 16.75 20.94 27.22

200 - - 2.88 3.83 4.79 5.73 7.66 9.58 11.95 15.31 19.75 23.93 31.60

Width In. Thickness in mm. - Weight in Kg. Per Feet

APPROX. WEIGHT OF STAINLESS STEEL PATTA PER FT.

STAINLESS STEEL PLATE AND SHEETS IN Kg/m2 square ft / square mtr / per pcs.

Wt. per Wt. per 1000 - 2000 1250 - 2500 1500 - 3000 2000 - 4000

Sq. Ft. sq. mtr. mm mm mm mm

.80 mm .610 6.540 13.100 20.500 29.500 52.400

1.00 mm .760 8.180 16.400 25.600 36.800 65.500

1.25 mm .950 10.230 20.500 32.000 46.000 81.900

1.50 mm 1.140 12.270 24.600 38.400 55.200 98.200

2.00 mm 1.520 16.370 32.700 51.200 73.700 131.000

2.50 mm 1.900 20.460 40.900 64.000 92.100 163.500

3.00 mm 2.280 24.550 49.100 76.700 110.500 196.500

4.00 mm 3.040 32.730 65.50 102.500 147.500 262.000

5.00 mm 3.800 40.920 82.000 128.000 184.000 327.000

6.00 mm 4.560 49.110 98.000 153.000 221.000 393.000

8.00 mm 6.080 65.480 131.000 205.000 295.000 524.000

10.00 mm 7.600 81.840 164.000 256.000 368.000 655.000

12.00 mm 9.120 98.220 196.000 307.000 442.000 786.000

15.00 mm 11.400 122.770 246.000 384.000 553.000 982.000

20.00 mm 15.200 163.680 327.000 512.000 737.000 1310.000

25.00 mm 19.010 204.620 409.000 639.000 921.000 1637.000

30.00 mm 22.810 245.550 491.000 767.000 1105.000 1964.400

40.00 mm 30.410 327.370 655.000 1023.000 1473.000 2619.000

50.00 mm 38.020 409.240 819.000 1279.000 1842.000 3274.000

Thickness


Since 1983


10

SWGNo.

DiaInch

DiaMM

SWGNo.

DiaInch

DiaMM

SWGNo.

DiaInch

DiaMM

32

33

34

35

36 37

38

39

40

41

42

43

44

45

46

47

48

49

50

.010 8

.0100

.0092

.0084

.0076

.0068

.0060

.0052

.0048

.0044

.0040

.0036

.0032

.0028

.0024

.0020

.0016

.0012

.0010

.274

.254

.234

.21 3

.193

.173

.152

.132

.122

.112

.102

.091

.081

.071

.061

.051

.041

.031

.026

STANDARD WIRE GUAGE

7/0

6 /0

5/0

4/0

3/0

2/0

1/0

1

2 3

4

5

6

7

8

9

10

11

12

12.700

11.786

10.973

10.160

9.449

8.839

8.230

7.620

7.010

6.401 5.893 5.385

4.877

4.470

4.064

3.658

3.251

2.946

2.642

23

24

25

26

27

28

29

30

31

13

14

15

16

17 18

19

20

21 22

.500

.464

.432

.400

.372

.348

.324

.300

.276

.252

.232

.212

.192 .176

.160

.144

.128

.116

.104

.0180

.0164

.0148

.0136

.0124

.0116

.0920

.0800

.0720

.0640

.0560

.0480

.0400

.0360

.0320

.0280

.0240

.0220

.0200

.610

.559

.508

.457

.417

.376

.345

.315

.295

2.237

2.032

1.829

1.626

1.422

1.219

1.016

.914

.813

.711

WEIGHTS OF STAINLESS STEEL BARS PER MTR.Rounds, Squares, Hexagons

Size mm

Round Kg./M

Square Kg/M

Hexagon Kg/M

Size mm

Round Kg./M

SquareKg/M

HexagonKg/M

Size mm

Round Kg./M

SquareKg/M

HexagonKg/M

8 0.395 0.502 0.435 56 19.335 24.618 21.319 135 112.364 143.066 123.899

9 0.499 0.636 0.551 60 22.195 28.260 24.474 140 120.841 153.86 133.247

10 0.617 0.785 0.680 65 26.049 33.166 28.723 145 129.627 165.046 142.934

12 0.888 1.130 0.979 70 30.210 38.456 33.312 150 138.721 176.625 152.962

15 1.387 1.766 1.530 75 34.680 44.156 38.240 160 157.833 200.96 174.036

20 2.466 3.140 2.719 80 39.458 50.240 43.509 170 178.179 228.865 196.471

25 3.853 4.906 4.249 85 44.545 56.710 51.355 175 188.814 240.406 208.198

30 5.549 7.065 6.118 90 49.939 63.585 55.066 180 198.757 254.340 220.265

31 5.925 7.544 6.533 95 55.642 70.850 61.360 200 246.614 314.000 271.932

32 6.313 8.038 6.961 100 61.654 78.500 67.983 210 271.893 346.185 299.805

35 7.553 9.616 8.328 105 67.973 86.546 74.951 220 299.403 379.340 329.038

38 8.903 11.335 9.817 110 74.601 94.985 81.259 250 385.356 490.625 424.894

40 9.865 12.650 10.877 115 81.537 103.816 89.907 280 483.365 615.440 532.986

45 12.485 15.896 13.767 120 88.781 113.040 97.895 285 500.782 637.616 552.192

50 15.413 19.625 16.996 125 96.337 122.656 106.223 290 518.508 660.185 571.737

55 18.650 23.750 20.564 130 104.195 132.665 114.891 295 536.541 682.146 591.737


Since 1983


11

NOMINALBORE

OutsideDiameter

Schedule5 S

Schedule10 S

STAINLESS STEEL PIPE DIMENSION STANDARD SCHEDULE SIZE IN KG. PER MTR. ( As per ANSI B 36.19-1965)

Formula - Pipe Weight Kg/Mtr OD - Thick x Thick x 0.02466 = Kg Per Mtr.

Schedule20 S

Schedule40 S

Schedule80 S

Schedule160 S

ScheduleXXS

WT WEIGHT WT WEIGHT WT WEIGHT WT WEIGHT WT WEIGHT WT WEIGHT WT WEIGHT

MM INCH MM MM (KG/MT) MM (KG/MT) MM (KG/MT) MM (KG/MT) MM (KG/MT) MM (KG/MT) MM (KG/MT)

3 1/8 10.3 1.24 0.276 1.24 0.28 1.5 0.33 1.73 0.37 2.41 0.47 - - - -

6 1/4 13.7 1.24 0.390 1.65 0.49 2.00 0.58 2.24 0.631 3.02 0.80 - - - -

10 3/8 17.1 1.24 0.490 1.65 0.63 2.00 0.74 2.31 0.845 3.20 1.10 - - - -

15 1/2 21.3 1.65 0.80 2.11 1.00 2.30 1.07 2.77 1.27 3.75 1.62 4.75 1.94 7.47 2.55

20 3/4 26.7 1.65 1.03 2.11 1.28 2.55 1.52 2.87 1.68 3.91 2.20 5.54 2.90 7.82 3.63

25 1 33.4 1.65 1.30 2.77 2.09 2.55 1.94 3.38 2.50 4.55 3.24 6.35 4.24 9.09 5.45

32 1.1/4 42.2 1.65 1.65 2.77 2.70 3.00 2.90 3.56 3.39 4.85 4.47 6.35 5.61 9.70 7.77

40 1.1/2 48.30 1.65 1.91 2.77 3.11 3.00 3.55 3.68 4.05 5.08 5.41 7.14 7.25 10.1 9.54

50 2 60.3 1.65 2.40 2.77 3.93 3.00 4.24 3.91 5.44 5.54 7.48 8.74 11.1 11.07 13.44

65 2.1/2 73.0 2.11 3.69 3.05 5.26 4.00 6.81 5.16 8.63 7.01 11.41 9.53 14.9 14.02 20.39

80 3 88.9 2.11 4.51 3.05 6.45 4.00 8.37 5.49 11.29 7.62 15.27 11.1 21.30 15.24 27.68

100 4 114.3 2.11 5.84 3.05 8.36 4.50 12.18 6.02 16.07 8.56 22.32 13.49 33.54 17.12 41.03

125 5 141.3 2.77 9.47 3.40 11.57 5.00 16.80 6.55 21.8 9.53 31.97 15.88 49.11 19.05 57.43

150 6 168.3 2.77 11.32 3.40 13.84 6.35 25.36 7.11 28.30 10.97 42.70 18.20 67.56 21.95 79.22

200 8 219.1 2.77 14.79 3.76 19.96 6.35 33.31 8.18 42.61 12.7 64.64 23.01 111.27 22.23 107.92

250 10 273.1 3.40 22.63 4.19 27.78 6.35 41.77 9.27 60.50 12.7 96.01 28.58 172.33 25.40 155.15

300 12 323.9 3.96 31.25 4.57 36.00 6.35 49.7 9.53 73.88 12.7 132.08 33.32 238.76 25.40 186.97

350 14 355.6 3.96 34.36 4.78 41.3 7.92 67.80 11.13 94.59 19.05 158.08 35.71 281.70 - -

400 16 406.4 4.19 41.56 4.78 47.29 7.92 77.83 12.7 123.30 21.41 203.33 40.46 365.11 - -

450 18 457.0 4.19 46.80 4.78 53.42 7.92 87.71 14.27 155.80 23.8 254.36 45.71 466.40 - -

500 20 508.0 4.78 59.25 5.54 68.61 9.53 117.14 15.09 183.42 26.19 311.2 49.99 564.68 - -

600 24 610.0 5.54 82.47 6.35 94.45 9.53 141.12 17.48 255.41 30.96 442.08 59.54 808.22 - -

650 26 660.4 - - 7.92 129.40 - - 9.53 155.32 12.70 205.97 - - - -

700 28 711.2 - - 7.92 139.47 - - 9.53 167.44 12.70 222.13 - - - -

750 30 762.0 6.35 120.15 7.92 149.55 - - 9.53 179.56 12.70 238.28 - - - -

800 32 812.8 - - 7.92 159.62 - - 9.53 191.69 12.70 254.44 - - - -

850 34 863.6 - - 7.92 169.64 - - 9.53 203.74 12.70 270.50 - - - -

900 36 914.4 - - 7.92 179.77 - - 9.53 215.93 12.70 286.75 - - - -


Since 1983


12

S. S. TUBE ROUND APPROX WEIGHT.KGS.PER.FEET

MM 0.40 0.50 0.65 0.80 0.90 0.95 1.00 1.20 1.50 2.00 2.50 3.00

09.53 0.028 0.034 0.044 0.053 0.059 0.062 0.064

12.70 0.037 0.046 0.059 0.072 0.080 0.084 0.088

15.88 0.047 0.058 0.075 0.091 0.102 0.107 0.112 0.133 0.163

19.05 0.056 0.070 0.090 0.110 0.123 0.130 0.136 0.162 0.199 0.258 0.313 0.364

20.00 0.074 0.095 0.116 0.130 0.137 0.144 0.171 0.210 0.272 0.331 0.386

25.40 0.176 0.184 0.220 0.271 0.354 0.433 0.508

31.75 0.221 0.232 0.277 0.343 0.450 0.553 0.652

33.40 0.233 0.245 0.292 0.362 0.475 0.584 0.689

38.10 0.267 0.280 0.335 0.415 0.516 0.673 0.796

42.20 0.296 0.311 0.372 0.462 0.608 0.750 0.889

45.00 0.316 0.333 0.397 0.493 0.650 0.803 0.953

48.30 0.340 0.358 0.427 0.531 0.700 0.866 1.027

48.40 0.341 0.358 0.428 0.582 0.702 0.867 1.030

50.80 0.358 0.376 0.450 0.559 0.738 0.898 1.084

60.30 0.448 0.536 0.667 0.881 1.092 1.300

63.50 0.473 0.565 0.703 0.930 1.153 1.372

76.20 0.680 0.847 1.122 1.392 1.663

88.90 0.796 0.991 1.314 1.633 1.948

101.60 0.911 1.135 1.506 1.873 2.236

S. S. TUBE SQUARE SECTION APPROX WEIGHT. KGS. PER. FEET

MM 0.40 0.50 0.65 0.80 0.90 0.95 1.00 1.20 1.50 2.00 2.50 3.00

12.5X12.5 0.075 0.091 0.102 0.107 0.112 0.133 0.163

14X14 0.130 0.136 0.162 0.199 0.258 0.313 0.364

20X20 0.149 0.167 0.176 0.184 0.220 0.271 0.354 0.433 0.508

25X25 0.187 0.210 0.221 0.232 0.277 0.343 0.450 0.553 0.652

30X30 0.267 0.280 0.335 0.415 0.516 0.673 1.030

38X38 0.341 0.358 0.428 0.582 0.702 0.867 1.030

40X40 0.354 0.373 0.445 0.553 0.730 0.903 1.073

50X50 0.450 0.473 0.565 0.703 0.930 1.153 1.372

S. S. TUBE RECTANGULAR SECTION APPROX WEIGHT. KGS. PER. FEET

MM 0.40 0.50 0.65 0.80 0.90 0.95 1.00 1.20 1.50 2.00 2.50 3.00

12X63 0.341 0.358 0.428 0.582 0.702 0.895 0.330

20X30 0.221 0.232 0.277 0.343 0.450 0.553 0.652

20X40 0.280 0.335 0.415 0.516 0.673 0.796

24x36 0.265 0.330 0.410

50X25 0.341 0.358 0.428 0.582 0.702 0.895 0.330

40X60 0.473 0.565 0.703 0.930 1.153 1.372

25X75 0.473 0.565 0.703 0.930 1.153 1.030

20x50 0.482

30x10 0.180

S. S. TUBE OVAL SECTION APPROX WEIGHT.KGS.PER.FEET

MM 0.40 0.50 0.65 0.80 0.90 0.95 1.00 1.20 1.50 2.00 2.50 3.00

33X13 0.12 0.15 0.17 0.18 0.18 0.22 0.27 0.35

65X25 0.36 0.38 0.45 0.56 0.74 0.9 1.08

S. S. TUBE TRIANGULAR SECTION APPROX WEIGHT.KGS.PER.FEET

MM 0.40 0.50 0.65 0.80 0.90 0.95 1.00 1.20 1.50 2.00 2.50 3.00

20x20x20 0.13 0.16 0.20


Since 1983


13

WEIGHT PER FOOT STANDARD TYPES OF STAINLESS STEEL GAUGE PIPES

1/4"

5/19"

3/8"

1/2”

5/8"

3/4"

7/8"

1"

1 1/4"

1 1/2"

1 3/4"

2"

2 1/4"

2 1/2"

2 3/4”

3"

3 1/2"

4"

4 1/2"

5"

5 ½"

6"

SizeO.D.

In mm10G (3.25)

(0.120”) 12G (2.64)(0.104”)

14G (2.03)(0.080”)

16G (1.65)(0.065”)

18G (1.21)(0.049”)

20G (0.91)(0.035”)

22G (0.71)(0.028”)

6.35

7.93

9.52

12.7

15.87

19.05

22.25

25.4

31.750

38.1

44.45

50.8

57.15

63.5

69.85

76.2

88.9

101.6

114.3

127.0

139.7

152.4

0.075

0.114

0.152

0.226

0.310

0.386

0.465

0.541

0.696

0.851

1.020

1.161

1.315

1.472

1.630

1.782

2.092

2.403

2.713

3.023

3.336

3.654

0.070

0.105

0.135

0.200

0.264

0.326

0.390

0.450

0.580

0.700

0.832

0.960

1.085

1.210

1.338

1.460

1.718

1.971

2.224

2.477

2.730

2.983

0.065

0.089

0.113

0.157

0.212

0.256

0.310

0.351

0.448

0.542

0.646

0.733

0.828

0.924

1.022

1.115

1.306

1.497

1.608

1.879

2.070

2.261

0.058

0.079

0.097

0.134

0.174

0.215

0.252

0.294

0.375

0.452

0.530

0.607

0.687

0.792

0.847

0.924

1.082

1.239

1.397

1.554

1.713

1.875

0.046

0.060

0.080

0.105

0.134

0.161

0.192

0.218

0.275

0.332

0.390

0.447

0.504

0.562

0.619

0.676

0.791

0.905

1.020

1.134

1.250

1.364

0.037

0.048

0.058

0.079

0.103

0.124

0.145

0.167

0.200

0.250

0.294

0.336

-

0.030

0.038

0.046

0.063

0.081

0.097

0.113

0.131

0.162

0.196

0.230

0.263

WEIGHT PER NO. IN KGS.

4MM 6MM 8MM 10MM 12MM 16MM 20MM 25MM

20MM 0.010 0.015 0.020 0.025 0.030 0.040 0.050 0.065

25MM 0.016 0.250 0.350 0.400 0.500 0.650 0.800 0.100

32MM 0.260 0.390 0.550 0.650 0.750 0.105 0.130 0.160

40MM 0.040 0.060 0.080 0.100 0.120 0.160 0.200 0.20

50MM 0.065 0.095 0.130 0.170 0.190 0.250 0.330 0.390

65MM 0.105 0.160 0.215 0.265 0.320 0.430 0.530 0.a660

75MM 0.15 0.220 0.300 0.365 0.440 0.580 0.730 0.930

90MM 0.205 0.305 0.405 0.510 0.615 0.810 1.015 1.270

100MM 0.260 0.390 0.520 0.650 0.780 1.040 1.300 1.630

110MM 0.300 0.455 0.608 0.760 0.910 1.210 1.520 1.890

125MM 0.390 0.590 0.790 0.980 1.180 1.565 1.960 2.450

150MM 0.565 0.850 1.130 1.410 1.690 2.250 2.815 3.520

175MM 0.765 1.150 1.535 1.915 2.300 3.065 3.830 4.800

200MM 1.000 1.500 2.000 2.500 3.000 4.000 5.000 6.250

APPROX WEIGHT S. S. CIRCLE PER NO.


Since 1983


14

M.S. BEAMS

Size Weight in Kgs. Weight in Kgs. in mm per feet per Mtr.

100x50 2.432 7.979

100x70 4.023 13.199

100x75 4.571 14.997

175x85 5.943 19.499

200x100 7.893 25.897

250x125 11.612 38.099

300x140 14.782 48.500

350x140 16.125 52.906

400x140 19.080 62.061

450x150 22.280 73.100

500x180 26.730 87.700

600x210 37.370 122.600

M. S. CHANNELS

75x40 2.172 7.126

100x50 2.925 9.597

125x65 3.992 13.098

150x75 5.120 16.799

175x75 5.973 19.597

200x75 6.796 22.298

250x80 9.326 30.599

300x90 11.063 36.298

400x100 15.270 50.300

M. S. ANGLES

20x20x3 0.274 0.899

25x25x3 0.335 1.099

31x31x3 0.390 1.280

35x35x5 0.792 2.599

37x37x3 0.518 1.700

40x40x3 0.548 1.798

40x40x5 0.915 3.002

40x40x6 1.066 3.498

50x50x5 1.158 3.799

50x50x6 1.372 4.502

60x60x6 1.645 5.397

65x65x6 1.767 5.798

65x65x8 2.346 7.697

65x65x10 2.864 9.397

75x75x6 2.072 6.798

75x75x8 2.712 8.898

75x75x10 3.352 10.998

80x80x6 2.224 7.297

80x80x8 2.925 9.697

90x90x6 2.499 8.199

90x90x8 3.292 10.801

90x90x10 4.084 13.400

100x100x6 2.804 9.200

100x100x8 3.687 14.912

100x100x10 4.545 17.701

100x100x12 5.395 16.497

M.S. WINDOW SECTION

Size Weight in Kgs. Weight in Kgs. in mm per feet per Mtr.

3/4” T Angle 0.275 0.902

1” T Angle 0.350 1.148

11/2” T Angle 1.100 3.610

2” T Angle 1.450 4760

21/2” T Angle 2.100 6.900

3” T Angle 2.800 9.200

M. S. ROUND

6 0.067 0.220

8 0.119 0.390

10 0.189 0.620

12 0.271 0.890

16 0.482 1.581

20 0.753 2.471

25 1.173 3.849

32 1.923 6.309

36 2.435 7.989

40 3.005 9.859

45 3.745 12.287

50 4.696 5.403

53 5.275 17.307

56 5.895 19.341

60 6.760 22.180

63 7.458 24.470

70 10.563 34.657

80 12.026 39.457

90 15.220 49.937

100 18.793 61.660

110 22.736 74.597

125 29.362 96.3325

M. S. PLATE

4 3.00 32.900

5 3800 40.000

6 4.500 48.000

8 6.000 54.000

10 7.500 80.000

12 9.000 96.000

16 12.000 128.000

20 15.000 160.000

25 18.750 200.00

WEIGHT OF M.S. BEAMS / M. S. CHANNELS / M.S. ANGLES / M. S. ROUND / M. S. PLATE

Weight in Weight in Size in Kg Kg MM per sq./ft. per sq./M

5 4.210 45.300

6 4.942 53.200

8 6.400 68.900

10 7.860 84.600

12 9.318 100.300

Weight in Weight in Gauge MM Kg Kg per sq./ft. per sq./M

16 1.60 1.170 12.596 18 1.20 0.936 10.072 20 0.91 0.760 8.070 22 0.71 0.606 6.527 24 0.63 0.490 5.277 26 0.50 0.396 4.267 28 0.40 0.324 3.486 30 0.31 0.266 2.866

CHEQUERED PLATES GALVANISED SHEETS


Since 1983


15

Size Brass Aluminium

In Fraction m.m. Round Hex Square Round Hex Square of in.

1/8 0.125 3.173 0.020 0.023 0.026 - - -

1/4” 0.250 6.35 0.082 0.091 0.104 0.030 0.035 0.037

3/8” 0.375 9.525 0.185 0.224 0.235 0.061 0.068 0.078

1/2” 0.500 12.700 0.329 0.363 0.419 0.109 0.120 0.138

5/8” 0.625 15.875 0.516 0.566 0.652 0.170 0.188 0.217

3/4” 0.750 19.050 0.739 0.817 0.940 0.245 0.270 0.312

7/8” 0.875 22.225 1.008 0.109 1.282 0.333 0.368 0.424

1” 1.000 25.400 1.314 1.451 1.675 0.436 0.481 0.555

1.1/8” 1.125 28.575 1.665 1.834 2.122 0.553 0.608 0.705

1.1/4” 1.250 31.750 2.053 2.268 2.619 0.680 0.748 0.867

1.3/8” 1.375 34.925 2.487 2.742 3.167 0.821 0.907 1.082

1.1/2” 1.500 38.1 0.961 3.262 3.769 0.980 1.082 1.248

1.5/8” 1.625 41.450 3.742 3.833 4.426 1.152 1.272 1.466

1.3/4” 1.750 44.450 4.029 4.444 5.129 1.352 1.474 1.720

1.7/8” 1.875 47.625 4.627 5.101 5.890 1.529 1.692 1.942

2” 2.000 50.800 5.266 5.804 6.703 1.742 1.919 2.220

2.1/4” 2.250 57.150 6.662 7.346 8.482 2.204 2.433 2.802

2.1/2” 2.500 63.500 8.225 9.067 10.472 2.722 3.005 3.462

2.3/4” 2.750 69.850 10.199 11.225 12.955 3.003 3.315 3.820

3” 3.000 76.2 12.454 13.267 15.341 3.919 4.327 4.990

3.1/2” 3.500 88.900 16.364 18.040 20.824 5.408 5.970 6.884

4” 4.000 101.600 21.477 23.210 27.358 6.968 7.693 8.870

WEIGHT OF BRASS & ALUMINIUM ROUND, HEX, SQUARE IN KG. PER LINER FOOT

WEIGHT OF ALUMINIUM SHEETS SQUARE FT./ PER NO. SWG Inch Milli Kg. Kg. Kg. Metres Sq. / Foot 8’x4’ 8’x3’

1 0.300 7.62 1.918 61.370 46.630

2 0.276 7.01 1.764 56.410 42.350

3 0.252 6.40 1.610 51.560 38.690

4 0.232 5.89 1.483 47.480 35.600

5 0.212 5.38 1.356 43.370 32.510

6 0.192 4.88 1.229 39.280 29.480

7 0.176 4.47 1.125 36.600 27.410

8 0.160 4.06 1.025 32.730 24.520

9 0.144 3.66 0.921 29.480 22.080

10 0.128 3.25 0.816 26.170 19.650

11 0.116 2.95 0.744 23.720 17.830

12 0.104 2.64 0.667 21.250 15.950

13 0.092 2.34 0.590 18.810 14.090

14 0.080 2.03 0.512 16.320 12.240

15 0.072 1.83 0.462 14.730 11.050

16 0.064 1.63 0.406 13.090 9.830

17 0.056 1.42 0.359 11.480 8.610

18 0.048 1.22 0.307 9.830 7.330

19 0.040 1.02 0.225 8.160 6.116

20 0.036 0.914 0.230 7.330 5.520

21 0.032 0.813 0.205 6.520 4.490


Since 1983


16

ALUMINIUM ALLOY : ALLOY EQUIVALENT (APPROX.)

ALUMINIUM ALLOY : CHEMICAL COMPOSITION STD. (PER CENT)

1 B 19500 1050 — 0.05 — — — 0.30 0.4 — 0.05 0.1 Aluminum 99.5% Min.

1 E 19501 1050(EC) — 0.04 — — — 0.15 0.35 — — 0.1 Aluminum 99.5% Min.

— 19700 1070 — 0.03 — — — 0.20 0.25 — 0.03 0.1 Aluminum 99.7% Min.

1 A 19800 1080 — 0.03 — — — 0.15 0.15 — 0.03 0.1 Aluminium 99.8% min.

1 C 19000 1100 — 0.1 — 0.2 — 0.50 0.7 — 0.1 0.1 Aluminum 99.0% Min.

— — 2011 5.0 6.0 — 0.1 — 0.4 0.7 — 0.1 0.4 Also lead & bismuth-0. 2-0.6 % Each

H 15 24345 2014 3.8 5.0 0.2 0.8 0.5 1.2 0.7 0.3 1.2 0.5 —

H14 24534 2017 3.5 0.1 0.4 1.2 0.2 0.7 0.7 0.4 1.2 0.5 —

N 3 31000 3003 — 0.1 — 0.1 — 0.6 0.7 0.8 1.5 0.4 —

N21 43000 4043 — 0.1 — 0.2 4.5 6.0 0.6 — 0.5 0.5 —

N 2 46000 4047 — 0.1 — 0.2 10.0 13.0 0.6 — 0.5 0.5 —

N 4 52000 5052 — 0.1 1.7 2.6 — 0.6 0.7 — 0.5 0.4 —

N 5 53000 5086 — 0.1 2.8 4.0 — 0.6 0.7 — 0.5 0.4 —

N 6 55000 5056 — 0.1 4.5 5.0 — 0.6 0.7 — 1.0 0.4 Chromium up to 0.25

N 8 54300 5083 — 0.1 4.0 4.9 — 0.4 0.7 0.5 1.0 0.4 Chromium (0.15-0.35)

Either Mn or Cr. shall be present.

H 20 65032 6061 0.15 0.4 0.8 1.2 0.4 0.8 0.7 0.2 0.8 0.4 Chromium up to 0.10

H 9 63400 6063 — 0.1 0.4 0.9 0.3 0.7 0.6 — 0.3 0.4 —

— — 6066 0.7 1.2 0.8 1.4 0.9 1.8 0.7 0.6 1.1 0.4 —

— 64423 — 0.5 1.0 0.5 1.3 0.7 1.3 0.8 1.0 — — —

91 E 63401 6101 — 0.1 0.35 0.8 0.3 0.7 0.5 — 0.03 0.1 —

— 64401 6201 — 0.1 0.6 0.9 0.5 0.9 0.5 — 0.03 0.1 —

H30 64430 6351 — 0.1 0.4 1.2 0.6 1.3 0.6 0.4 1.0 0.3 —

— 74530 7039 — 0.2 1.0 1.5 — 0.4 0.7 0.2 0.7 0.4 Zinc (4.5%)

— — 7075 1.20 2.0 2.1 2.9 — 0.5 0.5 — 0.3 0.5 Zinc (5.1-6.1) & Chromium (0.2-0.28)

Equivalent alloy(A.A.)

New U.S.A.

Alloy(ISS)Old

Copper Magnesium Silicon Iron Manganese *Other(total) Remark

Max.Min. Max.Min. Max.Min.

India U.S.A Britain Canada Germany Russia I.S.O French

New IS Old IS (A.A.) (B.S) (DIN) ND 19501 1E 1350(E. C.) 1E C 1S E-Al 99.5 — — —

19500 1B 1050 1B 1S A-99.5 — A1-99.5 1050A

19600 — 1060 — — — — — —

19700 — 1070 — — Al-99.7 — Al-99.7 —

19800 1A 1080 1A — — — Al-99.8 —

19000 1C 1100 1C 2S Al-99.0 AD Al-99.0 1200

— — 2011 — 28S Al-Cu-Bi-Pb — Al-Cu-6 BI PB 2011

24345 H15 2014 H15 B26S Al-Cu-Si AK — —

24534 H14 2017 H14 17S/16S — D1 Al-Cu 4Mg Si —

— — 2024 — 24S Al-CuMg.2 — Al-Cu-4 Mg 1 2024

31000 N3 3003 N3 3S Al-Mn A-Mn Al-Mn 1 3003

43000 N21 4043 N21 33S Al-Si-5 AK Al-Si5 4043

46000 N2 4047 N2 35S — — — —

51000A — 5005 — B57S — — Al-Mg-1 —

52000 N4 5052 N4 M57S Al-Mg.2 A-Mg AlMg-2 5051

53000 N5 5086 N5 54S — A.Mg-3 Al.Mg-23.5 —

54300 N8 5083 N8 D54S Al-Mg 4.5Mn — Al-Mg-4.5Mn 5083

55000 N6 5056 N6 A56S Al-Mg-5 — Al-Mg-5 5356

65032 H20 6061 H20 65S Al-Mg-Si Cu — Al-Mg-1Si Cu —-

63400 H9 6063 H9 50S Al-Mg-Si 0.5 — Al-Mg-Si —

64430 H30 6351 H30 B51S Al-Mg.Si-1 AV Al-Si-1 Mg 6081

64423 H11 6066 H11 C62S — — — —

62400 — 6005 — C51S — — — —

63401 91E 6101 91E D50S E.A1.Mg.Si 0.5 — — —

64401 — 6201 — —- — — — —

74530 — 7039 — D74S Al-Zn-Mg. 1 — — 3004

— — 7075 DTD 5124 75S Al-Zn-Mg — Al-ZN 6 Mg Cu 7075

Cu 1.5 �


Since 1983


17

STAINLESS STEEL FASTNERS

HEX HEAD SCREWS

HEXAGON SOCKETCAP SCREWS

HEX SOCKETCOUNTERSUNK SCREWS

BUTTON HEADSOCKET SCREWS

HEXAGON SOCKET SETSCREWS CONEPOINT-CUP POINT

CUP SQUARE(CARRIAGE BOLTS)

SLOTTED CHEESE HEADMACHINE SCREWS

SLOTTED PAN HEADMACHINE SCREWS

SLOTTED COUNTERSUNKHEAD MACHINE SCREWS

SLOTTED RAISEDCOUNTERSUNK HEADMACHINE SCREWS

CROSS RECESSEDCOUNTERSUNK MACHINESCREWS

COLLAR COMBINATIONPHILIPS PAN HEAD MACHINESELF TAPPING SCREWS

CROSS RECESSED PANHEAD MACHINE SCREWS

HEXAGON HEAD TAPPINGSCREWS TYPE AB

SLOT PAN TAPPINGSCREWS TYPE AB AND B

SLOT COUNTERSUNKTAPPING SCREWSTYPE AB AND B

THREADED RODS

PLAIN WASHERS

SPRING WASHER

SERRATED LOCK WASHERS

NYLON INSERT SELFLOCKING NUTS

HEXAGON THIN NUTS(LOCKNUT)

HEXAGON FULLNUTS

HEXAGON HEAD WOODSCREWS

ROUND HEAD WOODSCREWS SLOTTED ANDCROSS RECESSED

SLOT RAISED/COUNTERSUNK TAPPINGSCREWS TYPE AB

CROSS RECESSED PANHEAD TAPPING SCREWSTYPE AB AND B

CROSS RECESSED CSKTAPPING SCREWSTYPE AB AND B

CROSS RECESSED RAISED/CSK TAPPING SCREWSTYPE AB AND B

HEX HEAD BOLTS

RAISED/COUNTERSUNKWOOD SCREWS SLOTTEDAND CROSS RECESSED

COUNTERSUNK WOODSCREWS SLOTTED ANDCROSS RECESSED

DESCRIPTION


Since 1983


18

STAINLESS STEEL BUTTWELD FITTINGS


Since 1983


19

Nominal Pipe Size

OutsideDiameter Center to Face Back to Face Center to Center

Length 'L"MMS SP 43 B16.9

INCH MM DA

R=1.5D B CN

R=1D E F G R M SShort

LLong

L

1/2

3/4

1

1.1/4

1.1/2

2

2.1/2

3

3.1/2

4

5

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

36

DIMENSIONS OF BUTT-WELDING FITTING ANSI B-16.9 / B-16.28

15

20

25

32

40

50

65

80

90

100

125

150

200

250

300

350

400

450

500

550

600

650

700

750

800

850

900

21.3

26.7

33.4

42.2

48.3

60.3

73.0

88.9

101.6

114.3

141.3

168.3

219.1

273.1

323.8

355.6

406.4

457.2

508.0

559.0

610.0

660.0

711.0

762.0

813.0

864.0

914.4

38.00

29.00

38.00

48.00

57.15

76.00

95.25

114.30

133.35

152.0

190.0

229.0

305.0

381.0

457.0

533.0

610.0

686.0

762.0

838.0

914.0

991.0

1067.0

1143.0

1219.0

1295.0

1372.0

16.0

11.0

22.0

25.0

29.0

35.0

44.0

51.0

57.0

64.0

79.0

95.0

127.0

159.0

190.0

222.0

254.0

286.0

318.0

343.0

381.0

405.0

438.0

470.0

502.0

533.0

565.0

25.0

29.0

38.0

48.0

57.0

64.0

76.0

86.0

95.0

105.0

123.0

143.0

178.0

216.0

254.0

279.0

305.0

343.0

381.0

419.0

432.0

495.0

521.0

559.0

597.0

635.0

673.0

-

-

25.0

32.0

38.0

51.0

64.0

76.0

89.0

102.0

127.0

152.0

203.0

254.0

305.0

356.0

406.0

457.0

508.0

559.0

610.0

660.0

771.0

762.0

813.0

864.0

914.0

25.0

25.0

38.0

38.0

38.0

38.0

38.0

51.0

64.0

64.0

76.0

102.0

89.0

102.0

127.0

152.0

165.0

178.0

203.0

229.0

254.0

267.0

267.0

267.0

267.0

267.0

267.0

48.0

43.0

56.0

70.0

83.0

106.0

132.0

159.0

184.0

210.0

262.0

313.0

414.0

515.0

619.0

711.0

813.0

914.0

1016.0

1118.0

1219.0

-

-

41.0

52.0

62.0

81.0

100.0

121.0

140.0

159.0

197.0

237.0

313.0

391.0

467.0

533.0

610.0

686.0

762.0

838.0

914.0

76.0

57.0

76.0

95.0

114.0

152.0

191.0

229.0

267.0

305.0

381.0

457.0

610.0

762.0

914.0

1067.0

1219.0

1372.0

1524.0

1676.0

1829.0

51.0

64.0

76.0

102.0

127.0

152.0

178.0

203.0

254.0

305.0

406.0

508.0

610.0

711.0

813.0

914.0

1016.0

1118.0

1219.0

35.0

43.0

51.0

64.0

73.0

93.0

105.0

127.0

140.0

157.0

186.0

218.0

270.0

324.0

381.0

413.0

470.0

533.0

584.0

614.4

692.0

50.8

50.8

50.8

50.8

50.8

63.5

63.5

63.5

76.2

76.2

76.2

88.9

101.6

127.0

152.4

152.4

152.4

152.4

152.4

152.4

152.4

76.2

76.2

101.6

101.6

101.6

152.4

152.4

152.4

152.4

152.4

203.2

203.2

203.2

254.0

254.0

305.0

305.0

305.0

305.0

305.0

305.0

A

A

D

T

N

ND

T

DB

B

TT

G

DM T

G

DR

D

C C

D

CT D

E

S

L

D

90° ElbowLong Radius 45° Elbow

90° ElbowShort Radius

180° ReturnShort Radius

180° ReturnLong Radius Tee Equal Tee Caps Stub-End


Since 1983


20

Class 150 Flanges to ANSI B 16.5

15 ½ 88.9 11.2 22.4 35.1 30.2 15.8 47.8 60.4 15.7 4 ½” 60.0 45.0 0.4 0.5 0.4 20 ¾ 98.6 12.7 27.7 42.9 38.1 15.8 52.3 69.9 15.7 4 ½” 65.0 50.0 0.6 0.7 0.6 25 1 107.9 14.2 34.8 50.8 49.2 17.5 55.6 79.2 15.7 4 ½” 65.0 55.0 0.8 1.0 0.9 32 1¼ 117.3 15.7 43.2 63.5 58.7 20.6 57.2 88.9 15.7 4 ½” 70.0 55.0 1.0 1.3 1.2 40 1½ 127.0 17.5 49.5 73.2 65.1 22.4 62.0 98.6 15.7 4 ½” 70.0 60.0 1.3 1.7 1.5 50 2 152.4 19.1 62.0 91.9 77.8 25.5 63.5 120.7 19.1 4 5/8’ 80.0 65.0 2.1 2.6 2.4 65 2½ 177.8 22.2 74.7 104.6 90.5 28.5 69.9 139.7 19.1 4 5/8” 90.0 75.0 3.3 4.1 3.9 80 3 190.5 23.8 90.7 127.0 107.9 30.2 69.9 152.4 19.1 4 5/8” 90.0 75.0 3.9 4.9 4.9 100 4 228.6 23.8 116.1 157.2 134.9 33.3 76.2 190.5 19.1 8 5/8” 90.0 75.0 5.3 6.8 7.0 125 5 254.0 23.8 143.8 185.7 163.5 36.6 88.9 215.9 22.4 8 ¾” 90.0 80.0 6.1 8.6 8.6 150 6 279.4 25.4 170.7 215.9 192.1 39.6 88.9 241.3 22.4 8 ¾” 100.0 85.0 7.5 10.6 11.3 200 8 342.9 28.4 221.5 269.7 246.1 44.5 101.6 298.5 22.4 8 ¾” 110.0 90.0 12.1 17.6 19.6 250 10 406.4 30.2 276.4 323.9 304.8 49.3 101.6 362.0 22.4 12 7/8” 115.0 95.0 16.5 24.0 28.8 300 12 482.6 31.8 327.2 381.0 365.1 55.6 114.3 431.8 25.4 12 7/8” 120.0 100.0 26.2 36.5 43.2 350 14 533.4 35.1 359.2 412.8 400.0 57.2 127.0 476.3 28.4 12 1” 130.0 110.0 34.6 48.4 58.1 400 16 596.9 36.6 410.5 469.9 457.2 63.5 127.0 539.8 28.4 16 1” 135.0 115.0 44.8 60.6 76.1 450 18 635.0 39.6 461.8 533.4 504.8 68.3 139.7 577.9 31.8 16 1 1/8” 150.0 125.0 48.9 68.3 93.7 500 20 698.5 42.9 513.1 584.2 558.8 73.2 144.5 635.0 31.8 20 1 1/8” 160.0 135.0 61.9 84.5 122.0 600 24 812.8 47.8 616.0 692.2 663.6 82.6 152.4 749.3 35.1 20 1 ¼” 175.0 145.0 86.9 115.0 185.0

Weight (kg)

BlindWNSOWSW

RF MachBolt

Length

mm

RF StudBolt

Length

mm

BoltDiam.

In

Bolts

No.

HoleDiam.

Hmm

CircleDiam.PCDmm

W. NeckC

mm

SOW,SWThreaded

Cmm

Dia ofHub

Emm

RaisedFaceDiam.

Gmm

BoreSOWSWB

mm

FlangeThickness

Dmm

FlangeODA

mmNPSDN

DimensionsNominal Size

Length Thru Hub Bolt Drilling

Class 300 Flanges to ANSI B 16.5

15 ½ 95.3 14.2 22.4 35.1 38.1 22.4 52.3 66.5 15.7 4 ½" 65.0 55.0 0.6 0.8 0.6 20 ¾ 117.3 15.7 27.7 42.9 47.6 25.4 57.2 82.6 19.1 4 5/8" 75.0 60.0 1.1 1.3 1.1 25 1 124.0 17.5 34.5 50.8 54.0 26.9 62.0 88.9 19.1 4 5/8" 80.0 65.0 1.4 1.5 1.4 32 1¼ 133.4 19.1 43.2 63.5 63.5 26.9 65.0 98.6 19.1 4 5/8" 80.0 65.0 1.7 2.0 1.8 40 1½ 155.5 20.6 49.5 73.2 69.7 30.2 68.3 114.3 22.4 4 ¾" 90.0 75.0 2.5 2.9 2.7 50 2 165.1 22.2 62.0 91.9 84.1 33.3 69.9 127.0 19.1 8 5/8" 90.0 75.0 2.9 3.4 3.2 65 2½ 190.5 25.4 74.7 104.6 100.0 38.1 76.2 149.4 22.4 8 ¾" 100.0 85.0 4.3 5.2 4.9 80 3 209.5 28.4 90.7 127.0 117.5 42.9 79.2 168.1 22.4 8 ¾" 110.0 90.0 5.9 6.9 6.8 100 4 254.0 31.8 116.1 157.2 146.0 47.8 85.9 200.2 22.4 8 ¾" 110.0 95.0 9.6 11.2 11.5 125 5 279.4 35.1 143.8 185.7 177.8 50.8 98.6 235.0 22.4 8 ¾" 120.0 100.0 12.3 15.1 15.6 150 6 317.5 36.6 170.7 215.9 206.4 52.3 98.6 269.7 22.4 12 ¾" 125.0 105.0 15.6 19.1 20.9 200 8 381.0 41.1 221.5 209.7 260.3 62.0 112.3 330.2 25.4 12 7/8" 140.0 110.0 24.2 29.9 34.3 250 10 444.5 47.6 276.4 323.9 320.7 66.5 117.3 387.4 28.4 16 1" 155.0 130.0 37.1 42.7 53.3 300 12 520.7 50.8 327.2 381.0 374.6 73.2 130.0 450.9 31.8 16 1 1/8" 170.0 145.0 49.8 61.8 78.8 350 14 584.2 53.8 359.2 412.8 425.4 76.2 142.7 514.4 31.8 20 1 1/8" 175.0 150.0 69.9 85.8 105.0 400 16 647.7 57.2 410.5 469.9 482.6 82.6 146.1 571.5 35.1 20 1 ¼" 190.0 160.0 88.1 106.0 135.0 450 18 711.2 60.5 461.8 533.4 533.4 88.9 158.8 626.7 35.1 24 1 ¼" 195.0 170.0 109.0 131.0 175.0 500 20 774.7 63.5 513.1 584.2 587.4 95.3 162.1 685.8 35.1 24 1 ¼" 205.0 180.0 134.0 158.0 221.0 600 24 914.4 70.0 516.0 691.2 701.7 106.4 168.1 812.8 411 24 1 ½" 230.0 1950 201.0 230.0 338.0

Weight (kg)

BlindWNSOWSW

RF MachBolt

Length

mm

RF StudBolt

Length

mm

BoltDiam.

In

Bolts

No.

HoleDiam.

Hmm

CircleDiam.PCDmm

W. NeckC

mm

SOW,SWThreaded

Cmm

Dia ofHub

Emm

RaisedFaceDiam.

Gmm

BoreSOWSWB

mm

FlangeThickness

Dmm

FlangeODA

mmNPSDN

DimensionsNominal Size

Length Thru Hub Bolt Drilling

Notes: 1) Allweights are approximate.2) For Class 150, 300 the flanges thickness "D" dimension includes approx. 1.5 mm for the raised face height for Class 600, 900, 1500, 2500 the flange thickness does not included the riased face height and approx. 6.35mm must be added to D dimension. 3) Bolt length dimensions incorporate the height of the raised face. 4) Welding Neck bore is derived from the pipe schedule.

A

G

PCD

H

D

APCD

G

D

C

H

E

BH

CD

G

PCD

A

DC

E

B

G

PCD

A

H

BLIND WELDING NECK SLIP-ONSOCKET WELD


Since 1983


21


1/8” 10.3 21 22 17 32 16 19 11 10 40 - 6 - 25 25 19 32 22 -

1/4” 13.7 25 25 19 35 19 25 16 11 43 3 6 32 29 33 22 35 25 27

3/8” 17.2 29 33 22 38 22 25 17.5 13 48 4 8 38 33 38 25 38 32 27

1/2” 21.3 33 38 25 48 29 32 22 15 51 5 8 46 38 46 29 48 38 33

3/4” 26.7 38 46 29 51 35 37 27 16 57 6 10 51 44 56 33 51 44 38

1” 33.4 44 56 33 60 44 41 35 19 64 6 10 60 51 62 35 60 57 43

1¼” 42.2 51 62 35 67 57 44 44.5 21 70 7 14 72 60 75 43 67 64 46

1½” 48.3 60 75 43 79 64 44 51 21 79 8 16 80 64 84 44 79 76 48

2” 60.3 64 84 45 86 76 48 63.5 22 88 9 17 94 83 102 52 86 92 51

2½” 73.02 83 102 52 92 92 60 76 27 118 10 21 122 95 121 64 92 108 64

3” 89.00 95 121 64 108 108 65 89 29 121 10 65 140 106 146 79 108 127 68

4” 114.50 114 152 79 121 140 68 117.5 32 150 13 25 180 114 152 79 121 159 75

NOM

BORE

PIPE

O.D.

3000 LBS. COMMON FACTORS

DIMENSIONS AND OTHER SPECIFICATIONS AS PER CUSTOMER’S REQUIREMENT ARE AVAILABLE ON REQUEST

6000 LBS.

A B C G H K D E F I J L A B C G H K

B

B C

FG K

HE

DD

HLB

A

A

L

HEX HEADPLUG

BUSHINGPIPE CAPCOUPLINGUNION045 ELBOWTEE090 ELBOW

HALF COUPLING = G2

FORGED SCREWED FITTING TO ANSI B-16.11 3000/6000 LBS.THREADED TO ASA B 2.1

(DIMENSIONS IN MM)

1/8” 10.3 22 18.5 26 16 40 17.3 32 17.5 10 10.7 10 5 8 22 22 20 25 46

1/4” 13.7 22 22 26 18 43 21.2 32 17.5 10 14.1 10 5 8 27 25 24 25 51

3/8” 17.2 25 25 26 19 48 25.4 36 19 10 17.6 10 3 9 27 28 28 26 60

1/2” 21.3 27 32 30 21 51 31 43 22 10 21.7 10 6 13 31 34 34 31 72

3/4” 26.7 34 38 36 24 57 37 50 25 13 27 13 6 13 37 42 41 35 80

1” 33.4 37 46 40 25 64 45.2 60 27 13 33.8 13 9 17 42 50 50 40 94

1¼” 42.2 42 56 40 29 70 55 70 30 13 42.6 13 9 17 47 59 58 41 100

1½” 48.3 47 62 40 30 79 61.4 78 32 13 48.7 13 9 17 53 67 66 43 122

2” 60.3 56 75 52 37 89 75 95 38 13 61.2 16 15 23 59 84 83 55

2½” 73.02 60 92 52 48 114 91.3 125 38 16 73.8 16 14 24 102 56

3” 89.00 76 110 52 51 127 108.8 140 44 16 89.8 16 14 24 121 58

4” 114.50 88 137 58 150 136.9 48 19 115.5 19 14 24 152 64

NOM

BORE

PIPE

O.D.

3000 LBS. COMMON FACTORS 6000 LBS.

Amax.

Bmax.

K J L M N P Q Cmin.

Dmin.

Omin.

Omax.

A B M K N

D

C C

D A

MM M M M

NCC C C C

L

D

D DO O

K P

D DD D

C

D PB

B

A

90’ ELBOW 45’ ELBOW UNION COUPLING REDUCER HALF COUPLING CAPTEE

SOCKET WELD FITTING TO ANSI B-16.11


Since 1983


22

NCHEQ - 01

NCHEQ - 02

Perforation

STAINLESS STEELChequered Plates

NTEX - 11

NTEX - 14

SQUARE

CIRCLE

CAPSULE - 04

CAPSULE - 02


Since 1983


23

COPPER & BRASS PRODUCTS


Since 1983


24

FORMULAE FOR CALCULATING WEIGHT

1) Weight of S.S. Pipe O.D. ( mm ) – W Thick ( mm ) X W.Thick ( mm ) X 0.0248 = Wt. Per Mtr. O.D. ( mm ) – W Thick ( mm ) X W.Thick ( mm ) X 0.00756 = Wt. Per Ft.

2) Weight of S.S. Round Bar. Dia ( mm ) X Dia (mm ) X 0.00623 = Wt. Per. Mtr. Dia ( mm ) X Dia (mm ) X 0.0019 = Wt. Per. Feet.

3) Weight of S.S. Square Bar Dia ( mm ) X Dia ( mm ) X 0.00788 = Wt. Per. Mtr Dia ( mm ) X Dia ( mm ) X 0.0024 = Wt.Per. Feet.

4) Weight of S.S. Hexagonal Bar Dia ( mm ) X Dia ( mm ) X 0.00680 = Wt. Per.Mtr Dia ( mm ) X Dia ( mm ) X 0.002072 = Wt. Per Feet

5) Weight of S.S. Flat Bar Width (mm ) X Thick ( mm ) X 0.00798 = Wt.Per Mtr. Width (mm ) X Thick ( mm ) X 0.00243 = Wt.Per Feet.

6) Weight of S.S. Sheets & Plates :: Length ( Mtrs ) X Width ( Mtrs ) X Thick ( MM ) X 8 = Wt. Per PC Length ( ft ) X Width ( Ft ) X Thick ( mm ) X ¾ = Wt. Per PC

7) Weight of S.S. Circle Dia ( mm ) X Dia (mm ) X Thick ( mm ) / 160 = Gms. Per PC Dia ( mm ) X Dia (mm ) X Thick ( mm ) X 0.00000063 = Kg. Per PC.

8) Weight of Brass Pipe / Copper Pipe O.D. ( mm ) – Thick ( mm ) X W.Thick (mm ) X 0.0260 = Wt. Per Mtr.

9) Weight of Lead Pipe. O.D. ( mm ) – W.Thick ( mm ) X W.Thick ( mm ) X 0.0345 = Wt. Per Mtr.

10) Weight of Aluminium Pipe O.D. ( mm ) – W.Thick ( mm ) X W.Thick ( mm ) X 0.0083 = Wt.Per. Mtr.

11) Weight of Aluminium Sheet Length ( Mtr ) X Width ( Mtr ) X Thick ( mm ) X 2.69 = Wt.Per PC

12) Weight of Conversion of Mtr to Feet Wt of 1 Mtr. / 3.2808 = Wt.Per Feet.

13) Formula for Calculating Width of Sheet for making Pipe Outer DIA - Wall Thickness x 22/7 Width of Sheet

14) Formula for Calculating Principal Amount with Interest on Bank FDR 400 + rate of interest: 400 x Principal Amount = Quarterly P.A. & I. (Press = 4 Times of yearly)

15) Formula for Healthy Business Honesty + Quality of Goods + Quick Service + Reasonable rate = Good Healthy Business

Created World Class. - Satyapur Steel

Documents

Transcript of Created World Class. - Satyapur Steel